dmesg - anticipatory
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-5-686 (Debian 2.6.32-41) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jan 16 16:04:25 UTC 2012
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
BIOS-e820: 00000000bffe0000 - 00000000bffefc00 (ACPI data)
BIOS-e820: 00000000bffefc00 - 00000000bffff000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
DMI 2.3 present.
last_pfn = 0xbffe0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0FC000000 mask FFC000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000373fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037000000 page 2M
0037000000 - 00373fe000 page 4k
kernel direct mapping tables up to 373fe000 @ 7000-d000
RAMDISK: 3779f000 - 37fef1d1
Allocated new RAMDISK: 00100000 - 009501d1
Move RAMDISK from 000000003779f000 - 0000000037fef1d0 to 00100000 - 009501d0
ACPI: RSDP 000fdc40 00014 (v00 DELL )
ACPI: RSDT 000fdc54 00030 (v01 DELL PE2650 00000001 MSFT 0100000A)
ACPI: FACP 000fdc84 00074 (v01 DELL PE2650 00000001 MSFT 0100000A)
ACPI: DSDT bffe0000 0346A (v01 DELL PE2650 00000001 MSFT 0100000A)
ACPI: FACS bffefc00 00040
ACPI: APIC 000fdcf8 00088 (v01 DELL PE2650 00000001 MSFT 0100000A)
ACPI: SPCR 000fdd80 00050 (v01 DELL PE2650 00000001 MSFT 0100000A)
ACPI: Local APIC address 0xfee00000
2187MB HIGHMEM available.
883MB LOWMEM available.
mapped low ram: 0 - 373fe000
low ram: 0 - 373fe000
node 0 low ram: 00000000 - 373fe000
node 0 bootmap 00009000 - 0000fe80
(9 early reservations) ==> bootmem [0000000000 - 00373fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0001000000 - 00014ccd2c] TEXT DATA BSS ==> [0001000000 - 00014ccd2c]
#4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
#5 [00014cd000 - 00014d3228] BRK ==> [00014cd000 - 00014d3228]
#6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
#7 [0000100000 - 00009501d1] NEW RAMDISK ==> [0000100000 - 00009501d1]
#8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
found SMP MP-table at [c00fe710] fe710
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000373fe
HighMem 0x000373fe -> 0x000bffe0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x000000a0
0: 0x00000100 -> 0x000bffe0
On node 0 totalpages: 786304
free_area_init_node: node 0, pgdat c13b48c0, node_mem_map c14d5000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3968 pages, LIFO batch:0
Normal zone: 1736 pages used for memmap
Normal zone: 220470 pages, LIFO batch:31
HighMem zone: 4376 pages used for memmap
HighMem zone: 555722 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-15
ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[16])
IOAPIC[1]: apic_id 9, version 17, address 0xfec01000, GSI 16-31
ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[32])
IOAPIC[2]: apic_id 10, version 17, address 0xfec02000, GSI 32-47
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at bffff000 (gap: bffff000:3ec01000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c3000000 s34328 r0 d23016 u1048576
pcpu-alloc: s34328 r0 d23016 u1048576 alloc=1*4194304
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780160
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000373fe:000bffe0)
Memory: 3104860k/3145600k available (2506k kernel code, 39160k reserved, 1326k data, 380k init, 2240392k highmem)
virtual kernel memory layout:
fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
.init : 0xc13bf000 - 0xc141e000 ( 380 kB)
.data : 0xc1272a57 - 0xc13be4c4 (1326 kB)
.text : 0xc1000000 - 0xc1272a57 (2506 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 1793.880 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3587.76 BogoMIPS (lpj=7175520)
Security Framework initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Performance Events: no PMU driver, software events only.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090903
Enabling APIC mode: Flat. Using 3 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 0 pin 0) ...
....... works.
CPU0: Intel(R) XEON(TM) CPU 1.80GHz stepping 04
Booting processor 1 APIC 0x6 ip 0x6000
Initializing CPU#1
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
CPU1: Thermal monitoring enabled (TM1)
CPU1: Intel(R) Xeon(TM) CPU 1.80GHz stepping 07
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x1 ip 0x6000
Initializing CPU#2
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU2: Thermal monitoring enabled (TM1)
CPU2: Intel(R) XEON(TM) CPU 1.80GHz stepping 04
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x7 ip 0x6000
Initializing CPU#3
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
CPU3: Thermal monitoring enabled (TM1)
CPU3: Intel(R) Xeon(TM) CPU 1.80GHz stepping 07
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (14353.63 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0,2 level SIBLING
groups: group c300370c cpus 0 (cpu_power = 589) group c320370c cpus 2 (cpu_power = 589)
domain 1: span 0,2 level MC
groups: group c3003778 cpus 0,2 (cpu_power = 1178)
domain 2: span 0-3 level CPU
groups: group c30037e4 cpus 0,2 (cpu_power = 1178) group c31037e4 cpus 1,3 (cpu_power = 1178)
CPU1 attaching sched-domain:
domain 0: span 1,3 level SIBLING
groups: group c310370c cpus 1 (cpu_power = 589) group c330370c cpus 3 (cpu_power = 589)
domain 1: span 1,3 level MC
groups: group c3103778 cpus 1,3 (cpu_power = 1178)
domain 2: span 0-3 level CPU
groups: group c31037e4 cpus 1,3 (cpu_power = 1178) group c30037e4 cpus 0,2 (cpu_power = 1178)
CPU2 attaching sched-domain:
domain 0: span 0,2 level SIBLING
groups: group c320370c cpus 2 (cpu_power = 589) group c300370c cpus 0 (cpu_power = 589)
domain 1: span 0,2 level MC
groups: group c3003778 cpus 0,2 (cpu_power = 1178)
domain 2: span 0-3 level CPU
groups: group c30037e4 cpus 0,2 (cpu_power = 1178) group c31037e4 cpus 1,3 (cpu_power = 1178)
CPU3 attaching sched-domain:
domain 0: span 1,3 level SIBLING
groups: group c330370c cpus 3 (cpu_power = 589) group c310370c cpus 1 (cpu_power = 589)
domain 1: span 1,3 level MC
groups: group c3103778 cpus 1,3 (cpu_power = 1178)
domain 2: span 0-3 level CPU
groups: group c31037e4 cpus 1,3 (cpu_power = 1178) group c30037e4 cpus 0,2 (cpu_power = 1178)
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfc91e, last bus=5
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:04.0: reg 10 32bit mmio pref: [0xfeb80000-0xfeb80fff]
pci 0000:00:04.0: reg 14 io port: [0xecf8-0xecff]
pci 0000:00:04.0: reg 18 io port: [0xece8-0xecef]
pci 0000:00:04.0: reg 30 32bit mmio pref: [0xfe000000-0xfe00ffff]
pci 0000:00:04.1: reg 10 32bit mmio: [0xfe102000-0xfe102fff]
pci 0000:00:04.1: reg 14 io port: [0xec80-0xecbf]
pci 0000:00:04.1: reg 18 32bit mmio pref: [0xfeb00000-0xfeb7ffff]
pci 0000:00:04.2: reg 10 io port: [0xecf4-0xecf7]
pci 0000:00:0e.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
pci 0000:00:0e.0: reg 14 io port: [0xe800-0xe8ff]
pci 0000:00:0e.0: reg 18 32bit mmio: [0xfe101000-0xfe101fff]
pci 0000:00:0e.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:00:0e.0: supports D1 D2
pci 0000:00:0f.1: reg 10 io port: [0x8c0-0x8c7]
pci 0000:00:0f.1: reg 14 io port: [0x8c8-0x8cb]
pci 0000:00:0f.1: reg 18 io port: [0x8d0-0x8d7]
pci 0000:00:0f.1: reg 1c io port: [0x8d8-0x8db]
pci 0000:00:0f.1: reg 20 io port: [0x8b0-0x8bf]
pci 0000:00:0f.2: reg 10 32bit mmio: [0xfe100000-0xfe100fff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Root Bridge [PCI4] (0000:04)
pci 0000:05:06.0: reg 10 io port: [0xac00-0xacff]
pci 0000:05:06.0: reg 14 64bit mmio: [0xfcaff000-0xfcafffff]
pci 0000:05:06.0: reg 30 32bit mmio pref: [0xfcb00000-0xfcb1ffff]
pci 0000:05:06.1: reg 10 io port: [0xa800-0xa8ff]
pci 0000:05:06.1: reg 14 64bit mmio: [0xfcafe000-0xfcafefff]
pci 0000:05:06.1: reg 30 32bit mmio pref: [0xfcb00000-0xfcb1ffff]
pci 0000:04:08.0: bridge io port: [0xa000-0xafff]
pci 0000:04:08.0: bridge 32bit mmio: [0xfca00000-0xfcbfffff]
pci_bus 0000:04: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI4.ZION._PRT]
ACPI: PCI Root Bridge [PCI3] (0000:03)
pci 0000:03:06.0: reg 10 64bit mmio: [0xfcd10000-0xfcd1ffff]
pci 0000:03:06.0: PME# supported from D3hot D3cold
pci 0000:03:06.0: PME# disabled
pci 0000:03:08.0: reg 10 64bit mmio: [0xfcd00000-0xfcd0ffff]
pci 0000:03:08.0: PME# supported from D3hot D3cold
pci 0000:03:08.0: PME# disabled
pci_bus 0000:03: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI3._PRT]
ACPI: PCI Root Bridge [PCI2] (0000:02)
pci_bus 0000:02: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT]
ACPI: PCI Root Bridge [PCI1] (0000:01)
pci 0000:01:08.0: reg 10 io port: [0xdc00-0xdcff]
pci 0000:01:08.0: reg 14 64bit mmio: [0xfcf01000-0xfcf01fff]
pci 0000:01:08.0: reg 30 32bit mmio pref: [0xfce00000-0xfce1ffff]
pci 0000:01:08.1: reg 10 io port: [0xd800-0xd8ff]
pci 0000:01:08.1: reg 14 64bit mmio: [0xfcf00000-0xfcf00fff]
pci 0000:01:08.1: reg 30 32bit mmio pref: [0xfce00000-0xfce1ffff]
pci_bus 0000:01: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 *11 12 14)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 *10 11 12 14)
ACPI: PCI Interrupt Link [LNK6] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 3 4 5 6 7 9 *10 11 12 14)
ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK9] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11 12 14)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11 12 14)
ACPI: PCI Interrupt Link [LN10] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN11] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN12] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN13] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN14] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN15] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN16] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN17] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN18] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN19] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN1A] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN1B] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN1C] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN1D] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN1E] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN1F] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LUSB] (IRQs 3 4 *5 6 7 10 11 12 14)
vgaarb: device added: PCI:0000:00:0e.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:09: ioport range 0x800-0x89f has been reserved
system 00:09: ioport range 0x8a0-0x8af has been reserved
system 00:09: ioport range 0xc00-0xcd7 has been reserved
system 00:09: ioport range 0xf50-0xf58 has been reserved
system 00:09: ioport range 0x8e0-0x8e3 has been reserved
pci 0000:05:06.1: BAR 6: address space collision on of device [0xfcb00000-0xfcb1ffff]
pci 0000:01:08.1: BAR 6: address space collision on of device [0xfce00000-0xfce1ffff]
pci 0000:04:08.0: PCI bridge, secondary bus 0000:05
pci 0000:04:08.0: IO window: 0xa000-0xafff
pci 0000:04:08.0: MEM window: 0xfca00000-0xfcbfffff
pci 0000:04:08.0: PREFETCH window: 0xc0100000-0xc01fffff
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:04: resource 0 io: [0x00-0xffff]
pci_bus 0000:04: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:05: resource 0 io: [0xa000-0xafff]
pci_bus 0000:05: resource 1 mem: [0xfca00000-0xfcbfffff]
pci_bus 0000:05: resource 2 pref mem [0xc0100000-0xc01fffff]
pci_bus 0000:03: resource 0 io: [0x00-0xffff]
pci_bus 0000:03: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:02: resource 0 io: [0x00-0xffff]
pci_bus 0000:02: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0x00-0xffff]
pci_bus 0000:01: resource 1 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:0e.0: Boot video device
Unpacking initramfs...
Freeing initrd memory: 8512k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1368347766.008:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1707
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
serial 0000:00:04.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
0000:00:04.1: ttyS2 at I/O 0xec80 (irq = 23) is a 16550A
PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:08: RTC can wake from S4
rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram
cpuidle: using governor ladder
cpuidle: using governor menu
No iBFT detected.
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:08: setting system clock to 2013-05-12 08:36:06 UTC (1368347766)
Initalizing network drop monitor service
Freeing unused kernel memory: 380k freed
Write protecting the kernel text: 2508k
Write protecting the kernel read-only data: 920k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
udev[76]: starting version 164
SCSI subsystem initialized
libata version 3.00 loaded.
aic7xxx 0000:05:06.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
tg3.c:v3.116 (December 3, 2010)
tg3 0000:03:06.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
Floppy drive(s): fd0 is 360K PC
FDC 0 is a National Semiconductor PC87306
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
scsi0 : pata_serverworks
scsi1 : pata_serverworks
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8b0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8b8 irq 15
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ata1.00: ATAPI: HL-DT-ST GCR-8240N, 1.06, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM HL-DT-ST CD-ROM GCR-8240N 1.06 PQ: 0 ANSI: 5
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUSB] enabled at IRQ 11
ohci_hcd 0000:00:0f.2: PCI INT A -> Link[LUSB] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:0f.2: OHCI Host Controller
ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0f.2: irq 11, io mem 0xfe100000
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
usb usb1: SerialNumber: 0000:00:0f.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
tg3 0000:03:06.0: eth0: Tigon3 [partno(BCM95701A10) rev 0105] (PCIX:133MHz:64-bit) MAC address 00:06:5b:3f:2c:28
tg3 0000:03:06.0: eth0: attached PHY is 5701 (10/100/1000Base-T Ethernet) (WireSpeed[1])
tg3 0000:03:06.0: eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] TSOcap[0]
tg3 0000:03:06.0: eth0: dma_rwctrl[76db000f] dma_mask[64-bit]
tg3 0000:03:08.0: PCI INT A -> GSI 29 (level, low) -> IRQ 29
tg3 0000:03:08.0: eth1: Tigon3 [partno(BCM95701A10) rev 0105] (PCIX:133MHz:64-bit) MAC address 00:06:5b:3f:2c:29
tg3 0000:03:08.0: eth1: attached PHY is 5701 (10/100/1000Base-T Ethernet) (WireSpeed[1])
tg3 0000:03:08.0: eth1: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] TSOcap[0]
tg3 0000:03:08.0: eth1: dma_rwctrl[76db000f] dma_mask[64-bit]
scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
aic7xxx 0000:05:06.1: PCI INT B -> GSI 31 (level, low) -> IRQ 31
scsi3 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
aic7xxx 0000:01:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
scsi4 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
aic7xxx 0000:01:08.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
scsi 4:0:0:0: Direct-Access COMPAQ BF01863644 3B05 PQ: 0 ANSI: 2
scsi4:A:0:0: Tagged Queuing enabled. Depth 8
scsi target4:0:0: Beginning Domain Validation
scsi target4:0:0: wide asynchronous
scsi target4:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
scsi target4:0:0: Ending Domain Validation
scsi 4:0:1:0: Direct-Access IBM-ESXS ST336607LC FN B25E PQ: 0 ANSI: 3
scsi4:A:1:0: Tagged Queuing enabled. Depth 8
scsi target4:0:1: Beginning Domain Validation
scsi target4:0:1: wide asynchronous
scsi target4:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
scsi target4:0:1: Ending Domain Validation
scsi 4:0:2:0: Direct-Access IBM-ESXS ST336607LC FN B25F PQ: 0 ANSI: 3
scsi4:A:2:0: Tagged Queuing enabled. Depth 8
scsi target4:0:2: Beginning Domain Validation
scsi target4:0:2: wide asynchronous
scsi target4:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
scsi target4:0:2: Ending Domain Validation
scsi 4:0:6:0: Processor PE/PV 1x5 SCSI BP 1.1 PQ: 0 ANSI: 2
scsi target4:0:6: Beginning Domain Validation
scsi target4:0:6: Ending Domain Validation
scsi 4:0:0:0: Attached scsi generic sg1 type 0
scsi 4:0:1:0: Attached scsi generic sg2 type 0
scsi 4:0:2:0: Attached scsi generic sg3 type 0
scsi 4:0:6:0: Attached scsi generic sg4 type 3
scsi5 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
sd 4:0:1:0: [sdb] 71096640 512-byte logical blocks: (36.4 GB/33.9 GiB)
sd 4:0:2:0: [sdc] 71096640 512-byte logical blocks: (36.4 GB/33.9 GiB)
sd 4:0:0:0: [sda] 35565080 512-byte logical blocks: (18.2 GB/16.9 GiB)
sd 4:0:1:0: [sdb] Write Protect is off
sd 4:0:2:0: [sdc] Write Protect is off
sd 4:0:2:0: [sdc] Mode Sense: b3 00 10 08
sd 4:0:1:0: [sdb] Mode Sense: b3 00 10 08
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: fb 00 10 08
sd 4:0:2:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 4:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 4:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sdc:
sdb:
sda: sdc1
sdb1
sd 4:0:2:0: [sdc] Attached SCSI disk
sda1 sda2 <
sd 4:0:1:0: [sdb] Attached SCSI disk
sda5 >
sd 4:0:0:0: [sda] Attached SCSI disk
PM: Starting manual resume from disk
PM: Resume from partition 8:5
PM: Checking hibernation image.
PM: Error -22 checking image file
PM: Resume from disk failed.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
udev[385]: starting version 164
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
input: PC Speaker as /devices/platform/pcspkr/input/input2
ipmi message handler version 39.2
piix4_smbus 0000:00:0f.0: SMBus Host Controller at 0x8a0, revision 0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
IPMI System Interface driver.
ipmi_si: Trying SMBIOS-specified smic state machine at i/o address 0xecf4, slave address 0x20, irq 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Error: Driver 'pcspkr' is already registered, aborting...
ipmi: Found new BMC (man_id: 0x0002a2, prod_id: 0x0000, dev_id: 0x00)
IPMI smic interface initialized
ipmi_si 0000:00:04.2: PCI INT C -> GSI 27 (level, low) -> IRQ 27
ipmi_si: Trying PCI-specified smic state machine at i/o address 0xecf4, slave address 0x0, irq 27
ipmi_si: duplicate interface
ipmi_si 0000:00:04.2: PCI INT C disabled
ipmi_si: probe of 0000:00:04.2 failed with error -16
Adding 772088k swap on /dev/sda5. Priority:-1 extents:1 across:772088k
EXT3 FS on sda1, internal journal
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:03:06.0: eth0: Link is up at 100 Mbps, full duplex
tg3 0000:03:06.0: eth0: Flow control is on for TX and on for RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
svc: failed to register lockdv1 RPC service (errno 97).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
tg3 0000:03:08.0: eth1: Link is up at 1000 Mbps, full duplex
tg3 0000:03:08.0: eth1: Flow control is on for TX and on for RX
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth0: no IPv6 routers present
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
eth1: no IPv6 routers present
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
__ratelimit: 42 callbacks suppressed
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
__ratelimit: 44 callbacks suppressed
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
__ratelimit: 68 callbacks suppressed
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
__ratelimit: 66 callbacks suppressed
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
grub-probe: sending ioctl 1261 to a partition!
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
JFS: nTxBlock = 8192, nTxLock = 65536
NTFS driver 2.1.29 [Flags: R/W MODULE].
QNX4 filesystem 0.2.3 registered.
Btrfs loaded
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object
No module found in object