dmesg - std
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
BIOS-e820: [mem 0x0000000040005000-0x000000009d0a2fff] usable
BIOS-e820: [mem 0x000000009d0a3000-0x000000009d873fff] reserved
BIOS-e820: [mem 0x000000009d874000-0x000000009d8fffff] usable
BIOS-e820: [mem 0x000000009d900000-0x000000009d99dfff] ACPI NVS
BIOS-e820: [mem 0x000000009d99e000-0x000000009e16efff] reserved
BIOS-e820: [mem 0x000000009e16f000-0x000000009e16ffff] usable
BIOS-e820: [mem 0x000000009e170000-0x000000009e1b2fff] ACPI NVS
BIOS-e820: [mem 0x000000009e1b3000-0x000000009ebfbfff] usable
BIOS-e820: [mem 0x000000009ebfc000-0x000000009eff1fff] reserved
BIOS-e820: [mem 0x000000009eff2000-0x000000009effffff] usable
BIOS-e820: [mem 0x00000000df800000-0x00000000df9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041f5fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0x9d98f000 ACPI 2.0=0x9d98f000 SMBIOS=0xf04c0 MPS=0xfd4a0
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000004e000) (0MB)
efi: mem02: type=4, attr=0xf, range=[0x000000000004e000-0x0000000000060000) (0MB)
efi: mem03: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
efi: mem04: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
efi: mem05: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
efi: mem06: type=2, attr=0xf, range=[0x0000000001000000-0x000000000244f000) (20MB)
efi: mem07: type=7, attr=0xf, range=[0x000000000244f000-0x0000000020000000) (475MB)
efi: mem08: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
efi: mem09: type=7, attr=0xf, range=[0x0000000020200000-0x000000003628a000) (352MB)
efi: mem10: type=2, attr=0xf, range=[0x000000003628a000-0x000000003713d000) (14MB)
efi: mem11: type=7, attr=0xf, range=[0x000000003713d000-0x0000000040004000) (142MB)
efi: mem12: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
efi: mem13: type=7, attr=0xf, range=[0x0000000040005000-0x0000000067bc8000) (635MB)
efi: mem14: type=2, attr=0xf, range=[0x0000000067bc8000-0x000000008bf81000) (579MB)
efi: mem15: type=7, attr=0xf, range=[0x000000008bf81000-0x000000008bf87000) (0MB)
efi: mem16: type=1, attr=0xf, range=[0x000000008bf87000-0x000000008bfa5000) (0MB)
efi: mem17: type=7, attr=0xf, range=[0x000000008bfa5000-0x0000000090470000) (68MB)
efi: mem18: type=4, attr=0xf, range=[0x0000000090470000-0x0000000090953000) (4MB)
efi: mem19: type=7, attr=0xf, range=[0x0000000090953000-0x0000000090afd000) (1MB)
efi: mem20: type=4, attr=0xf, range=[0x0000000090afd000-0x0000000090b65000) (0MB)
efi: mem21: type=7, attr=0xf, range=[0x0000000090b65000-0x0000000090ba9000) (0MB)
efi: mem22: type=4, attr=0xf, range=[0x0000000090ba9000-0x0000000090bb3000) (0MB)
efi: mem23: type=7, attr=0xf, range=[0x0000000090bb3000-0x0000000090bc3000) (0MB)
efi: mem24: type=4, attr=0xf, range=[0x0000000090bc3000-0x0000000090f70000) (3MB)
efi: mem25: type=7, attr=0xf, range=[0x0000000090f70000-0x0000000090f75000) (0MB)
efi: mem26: type=4, attr=0xf, range=[0x0000000090f75000-0x000000009c229000) (178MB)
efi: mem27: type=7, attr=0xf, range=[0x000000009c229000-0x000000009ce36000) (12MB)
efi: mem28: type=3, attr=0xf, range=[0x000000009ce36000-0x000000009d0a3000) (2MB)
efi: mem29: type=0, attr=0xf, range=[0x000000009d0a3000-0x000000009d6b3000) (6MB)
efi: mem30: type=0, attr=0xf, range=[0x000000009d6b3000-0x000000009d809000) (1MB)
efi: mem31: type=0, attr=0xf, range=[0x000000009d809000-0x000000009d80f000) (0MB)
efi: mem32: type=0, attr=0xf, range=[0x000000009d80f000-0x000000009d874000) (0MB)
efi: mem33: type=7, attr=0xf, range=[0x000000009d874000-0x000000009d8f6000) (0MB)
efi: mem34: type=2, attr=0xf, range=[0x000000009d8f6000-0x000000009d900000) (0MB)
efi: mem35: type=10, attr=0xf, range=[0x000000009d900000-0x000000009d99e000) (0MB)
efi: mem36: type=6, attr=0x800000000000000f, range=[0x000000009d99e000-0x000000009e04e000) (6MB)
efi: mem37: type=6, attr=0x800000000000000f, range=[0x000000009e04e000-0x000000009e062000) (0MB)
efi: mem38: type=6, attr=0x800000000000000f, range=[0x000000009e062000-0x000000009e063000) (0MB)
efi: mem39: type=6, attr=0x800000000000000f, range=[0x000000009e063000-0x000000009e0fb000) (0MB)
efi: mem40: type=5, attr=0x800000000000000f, range=[0x000000009e0fb000-0x000000009e112000) (0MB)
efi: mem41: type=5, attr=0x800000000000000f, range=[0x000000009e112000-0x000000009e16f000) (0MB)
efi: mem42: type=4, attr=0xf, range=[0x000000009e16f000-0x000000009e170000) (0MB)
efi: mem43: type=10, attr=0xf, range=[0x000000009e170000-0x000000009e1b3000) (0MB)
efi: mem44: type=4, attr=0xf, range=[0x000000009e1b3000-0x000000009e304000) (1MB)
efi: mem45: type=3, attr=0xf, range=[0x000000009e304000-0x000000009ebcd000) (8MB)
efi: mem46: type=4, attr=0xf, range=[0x000000009ebcd000-0x000000009ebd2000) (0MB)
efi: mem47: type=3, attr=0xf, range=[0x000000009ebd2000-0x000000009ebd6000) (0MB)
efi: mem48: type=4, attr=0xf, range=[0x000000009ebd6000-0x000000009ebe3000) (0MB)
efi: mem49: type=3, attr=0xf, range=[0x000000009ebe3000-0x000000009ebf5000) (0MB)
efi: mem50: type=4, attr=0xf, range=[0x000000009ebf5000-0x000000009ebfc000) (0MB)
efi: mem51: type=6, attr=0x800000000000000f, range=[0x000000009ebfc000-0x000000009eff2000) (3MB)
efi: mem52: type=4, attr=0xf, range=[0x000000009eff2000-0x000000009f000000) (0MB)
efi: mem53: type=7, attr=0xf, range=[0x0000000100000000-0x000000041f600000) (12790MB)
efi: mem54: type=0, attr=0x8000000000000000, range=[0x00000000df800000-0x00000000dfa00000) (2MB)
efi: mem55: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
efi: mem56: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem57: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
efi: mem58: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
efi: mem59: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
efi: mem60: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
DMI 2.7 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z77 Pro4-M, BIOS P1.80 01/17/2013
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x41f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask C00000000 write-back
1 base 400000000 mask FE0000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 base 0A0000000 mask FE0000000 uncachable
4 base 09F800000 mask FFF800000 uncachable
5 base 41F800000 mask FFF800000 uncachable
6 base 41F600000 mask FFFE00000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 512MB, type WB
reg 2, base: 3GB, range: 1GB, type UC
reg 3, base: 2560MB, range: 512MB, type UC
reg 4, base: 2552MB, range: 8MB, type UC
reg 5, base: 16888MB, range: 8MB, type UC
reg 6, base: 16886MB, range: 2MB, type UC
total RAM covered: 15342M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 8 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2552MB, range: 8MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 512MB, type WB
reg 6, base: 16886MB, range: 2MB, type UC
reg 7, base: 16888MB, range: 8MB, type UC
e820: update [mem 0x9f800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x9f000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd7c0-0x000fd7cf] mapped at [ffff8800000fd7c0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff88000008a000] 8a000 size 24576
init_memory_mapping: [mem 0x00000000-0x9effffff]
[mem 0x00000000-0x9effffff] page 2M
kernel direct mapping tables up to 0x9effffff @ [mem 0x1fffc000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x41f5fffff]
[mem 0x100000000-0x41f5fffff] page 2M
kernel direct mapping tables up to 0x41f5fffff @ [mem 0x9d8ee000-0x9d8fffff]
RAMDISK: [mem 0x3628a000-0x3713cfff]
ACPI: RSDP 000000009d98f000 00024 (v02 ALASKA)
ACPI: XSDT 000000009d98f080 0007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 000000009d998df0 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 000000009d98f190 09C5D (v02 ALASKA A M I 00000022 INTL 20051117)
ACPI: FACS 000000009d99c080 00040
ACPI: APIC 000000009d998f00 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 000000009d998f78 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 000000009d998fc0 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: AAFT 000000009d999000 00112 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET 000000009d999118 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 000000009d999150 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 000000009d9994c0 009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 000000009d999e70 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: DMAR 000000009d99a908 000B8 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: BGRT 000000009d99a9c0 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041f5fffff]
Initmem setup node 0 [mem 0x00000000-0x41f5fffff]
NODE_DATA [mem 0x41f5fc000-0x41f5fffff]
[ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040fc00000-ffff88041ebfffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x41f5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x40003fff]
node 0: [mem 0x40005000-0x9d0a2fff]
node 0: [mem 0x9d874000-0x9d8fffff]
node 0: [mem 0x9e16f000-0x9e16ffff]
node 0: [mem 0x9e1b3000-0x9ebfbfff]
node 0: [mem 0x9eff2000-0x9effffff]
node 0: [mem 0x100000000-0x41f5fffff]
On node 0 totalpages: 3919637
DMA zone: 64 pages used for memmap
DMA zone: 40 pages reserved
DMA zone: 3879 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 625094 pages, LIFO batch:31
Normal zone: 51160 pages used for memmap
Normal zone: 3223080 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
PM: Registered nosave memory: 0000000040004000 - 0000000040005000
PM: Registered nosave memory: 000000009d0a3000 - 000000009d874000
PM: Registered nosave memory: 000000009d900000 - 000000009d99e000
PM: Registered nosave memory: 000000009d99e000 - 000000009e16f000
PM: Registered nosave memory: 000000009e170000 - 000000009e1b3000
PM: Registered nosave memory: 000000009ebfc000 - 000000009eff2000
PM: Registered nosave memory: 000000009f000000 - 00000000df800000
PM: Registered nosave memory: 00000000df800000 - 00000000dfa00000
PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
e820: [mem 0x9f000000-0xdf7fffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88041f200000 s83584 r8192 d22912 u524288
pcpu-alloc: s83584 r8192 d22912 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3852053
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 15129904k/17291264k available (6711k kernel code, 1612716k absent, 548644k reserved, 6459k data, 928k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:712 16
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 62914560 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3400.118 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.23 BogoMIPS (lpj=13600472)
pid_max: default: 32768 minimum: 301
init_memory_mapping: [mem 0xdf800000-0xdf9fffff]
[mem 0xdf800000-0xdf9fffff] page 2M
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 25118 entries in 99 pages
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
DMAR: RMRR base: 0x0000009d7d6000 end: 0x0000009d807fff
DMAR: RMRR base: 0x000000df800000 end: 0x000000df9fffff
IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
HPET id 0 under DRHD base 0xfed91000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz stepping 09
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 #2 #3 Ok.
Brought up 4 CPUs
Total of 4 processors activated (27200.94 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x9d900000-0x9d99dfff] (647168 bytes)
PM: Registering ACPI NVS region [mem 0x9e170000-0x9e1b2fff] (274432 bytes)
dummy:
RTC time: 12:12:07, date: 04/29/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 000000009d821018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 000000009d822a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 000000009d823c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: >host bridge window [mem 0xdfa00000-0xfeafffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >root bus resource [mem 0xdfa00000-0xfeafffff]
pci 0000:00:00.0: >[8086:0150] type 00 class 0x060000
pci 0000:00:02.0: >[8086:0152] type 00 class 0x030000
pci 0000:00:02.0: >reg 10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: >reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: >reg 20: [io 0xf000-0xf03f]
pci 0000:00:14.0: >[8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: >reg 10: [mem 0xf7d00000-0xf7d0ffff 64bit]
pci 0000:00:14.0: >PME# supported from D3hot D3cold
pci 0000:00:16.0: >[8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: >reg 10: [mem 0xf7d1a000-0xf7d1a00f 64bit]
pci 0000:00:16.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: >[8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: >reg 10: [mem 0xf7d18000-0xf7d183ff]
pci 0000:00:1a.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: >[8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: >reg 10: [mem 0xf7d10000-0xf7d13fff 64bit]
pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: >[8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: >[8086:1e1a] type 01 class 0x060400
pci 0000:00:1c.5: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: >[8086:1e1e] type 01 class 0x060400
pci 0000:00:1c.7: >PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: >[8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: >reg 10: [mem 0xf7d17000-0xf7d173ff]
pci 0000:00:1d.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: >[8086:1e44] type 00 class 0x060100
pci 0000:00:1f.2: >[8086:2822] type 00 class 0x010400
pci 0000:00:1f.2: >reg 10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: >reg 14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: >reg 18: [io 0xf090-0xf097]
pci 0000:00:1f.2: >reg 1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: >reg 20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: >reg 24: [mem 0xf7d16000-0xf7d167ff]
pci 0000:00:1f.2: >PME# supported from D3hot
pci 0000:00:1f.3: >[8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: >reg 10: [mem 0xf7d15000-0xf7d150ff 64bit]
pci 0000:00:1f.3: >reg 20: [io 0xf040-0xf05f]
pci 0000:00:1c.0: >PCI bridge to [bus 01-01]
pci 0000:02:00.0: >[10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: >reg 10: [io 0xe000-0xe0ff]
pci 0000:02:00.0: >reg 18: [mem 0xf0004000-0xf0004fff 64bit pref]
pci 0000:02:00.0: >reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:02:00.0: >supports D1 D2
pci 0000:02:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: >PCI bridge to [bus 02-02]
pci 0000:00:1c.5: > bridge window [io 0xe000-0xefff]
pci 0000:00:1c.5: > bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:03:00.0: >[1b21:0612] type 00 class 0x010601
pci 0000:03:00.0: >reg 10: [io 0xd050-0xd057]
pci 0000:03:00.0: >reg 14: [io 0xd040-0xd043]
pci 0000:03:00.0: >reg 18: [io 0xd030-0xd037]
pci 0000:03:00.0: >reg 1c: [io 0xd020-0xd023]
pci 0000:03:00.0: >reg 20: [io 0xd000-0xd01f]
pci 0000:03:00.0: >reg 24: [mem 0xf7c00000-0xf7c001ff]
pci 0000:00:1c.7: >PCI bridge to [bus 03-03]
pci 0000:00:1c.7: > bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.7: > bridge window [mem 0xf7c00000-0xf7cfffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
pci0000:00: >Requesting ACPI _OSC control (0x1d)
pci0000:00: >ACPI _OSC control (0x18) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0x9d0a3000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9d900000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9e170000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9ebfc000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9f000000-0x9fffffff]
e820: reserve RAM buffer [mem 0x41f600000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-3e]
pnp 00:00: >[io 0x0000-0x0cf7 window]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000c0000-0x000c3fff window]
pnp 00:00: >[mem 0x000c4000-0x000c7fff window]
pnp 00:00: >[mem 0x000c8000-0x000cbfff window]
pnp 00:00: >[mem 0x000cc000-0x000cffff window]
pnp 00:00: >[mem 0x000d0000-0x000d3fff window]
pnp 00:00: >[mem 0x000d4000-0x000d7fff window]
pnp 00:00: >[mem 0x000d8000-0x000dbfff window]
pnp 00:00: >[mem 0x000dc000-0x000dffff window]
pnp 00:00: >[mem 0x000e0000-0x000e3fff window]
pnp 00:00: >[mem 0x000e4000-0x000e7fff window]
pnp 00:00: >[mem 0x000e8000-0x000ebfff window]
pnp 00:00: >[mem 0x000ec000-0x000effff window]
pnp 00:00: >[mem 0x000f0000-0x000fffff window]
pnp 00:00: >[mem 0xdfa00000-0xfeafffff window]
pnp 00:00: >[mem 0x00010000-0x0001ffff window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: >[mem 0xfed40000-0xfed44fff]
system 00:01: >[mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: >[io 0x0000-0x001f]
pnp 00:02: >[io 0x0081-0x0091]
pnp 00:02: >[io 0x0093-0x009f]
pnp 00:02: >[io 0x00c0-0x00df]
pnp 00:02: >[dma 4]
pnp 00:02: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: >[mem 0xff000000-0xffffffff]
pnp 00:03: >Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:04: >[mem 0xfed00000-0xfed003ff]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: >[io 0x002e-0x002f]
pnp 00:05: >[io 0x004e-0x004f]
pnp 00:05: >[io 0x0061]
pnp 00:05: >[io 0x0063]
pnp 00:05: >[io 0x0065]
pnp 00:05: >[io 0x0067]
pnp 00:05: >[io 0x0070]
pnp 00:05: >[io 0x0080]
pnp 00:05: >[io 0x0092]
pnp 00:05: >[io 0x00b2-0x00b3]
pnp 00:05: >[io 0x0680-0x069f]
pnp 00:05: >[io 0x1000-0x100f]
pnp 00:05: >[io 0xffff]
pnp 00:05: >[io 0xffff]
pnp 00:05: >[io 0x0400-0x0453]
pnp 00:05: >[io 0x0458-0x047f]
pnp 00:05: >[io 0x0500-0x057f]
pnp 00:05: >[io 0x164e-0x164f]
system 00:05: >[io 0x0680-0x069f] has been reserved
system 00:05: >[io 0x1000-0x100f] has been reserved
system 00:05: >[io 0xffff] has been reserved
system 00:05: >[io 0xffff] has been reserved
system 00:05: >[io 0x0400-0x0453] has been reserved
system 00:05: >[io 0x0458-0x047f] has been reserved
system 00:05: >[io 0x0500-0x057f] has been reserved
system 00:05: >[io 0x164e-0x164f] has been reserved
system 00:05: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: >[io 0x0070-0x0077]
pnp 00:06: >[irq 8]
pnp 00:06: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: >[io 0x0454-0x0457]
system 00:07: >[io 0x0454-0x0457] has been reserved
system 00:07: >Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:08: >[io 0x0000-0xffffffffffffffff disabled]
pnp 00:08: >[io 0x0290-0x029f]
pnp 00:08: >[io 0x0000-0xffffffffffffffff disabled]
system 00:08: >[io 0x0290-0x029f] has been reserved
system 00:08: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: >[io 0x0010-0x001f]
pnp 00:09: >[io 0x0022-0x003f]
pnp 00:09: >[io 0x0044-0x005f]
pnp 00:09: >[io 0x0062-0x0063]
pnp 00:09: >[io 0x0065-0x006f]
pnp 00:09: >[io 0x0072-0x007f]
pnp 00:09: >[io 0x0080]
pnp 00:09: >[io 0x0084-0x0086]
pnp 00:09: >[io 0x0088]
pnp 00:09: >[io 0x008c-0x008e]
pnp 00:09: >[io 0x0090-0x009f]
pnp 00:09: >[io 0x00a2-0x00bf]
pnp 00:09: >[io 0x00e0-0x00ef]
pnp 00:09: >[io 0x04d0-0x04d1]
system 00:09: >[io 0x04d0-0x04d1] has been reserved
system 00:09: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: >[io 0x00f0-0x00ff]
pnp 00:0a: >[irq 13]
pnp 00:0a: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0b: >[mem 0xfed1c000-0xfed1ffff]
pnp 00:0b: >[mem 0xfed10000-0xfed17fff]
pnp 00:0b: >[mem 0xfed18000-0xfed18fff]
pnp 00:0b: >[mem 0xfed19000-0xfed19fff]
pnp 00:0b: >[mem 0xf8000000-0xfbffffff]
pnp 00:0b: >[mem 0xfed20000-0xfed3ffff]
pnp 00:0b: >[mem 0xfed90000-0xfed93fff]
pnp 00:0b: >[mem 0xfed45000-0xfed8ffff]
pnp 00:0b: >[mem 0xff000000-0xffffffff]
pnp 00:0b: >[mem 0xfee00000-0xfeefffff]
pnp 00:0b: >[mem 0xdfa00000-0xdfa00fff]
system 00:0b: >[mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: >[mem 0xfed10000-0xfed17fff] has been reserved
system 00:0b: >[mem 0xfed18000-0xfed18fff] has been reserved
system 00:0b: >[mem 0xfed19000-0xfed19fff] has been reserved
system 00:0b: >[mem 0xf8000000-0xfbffffff] has been reserved
system 00:0b: >[mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0b: >[mem 0xfed90000-0xfed93fff] has been reserved
system 00:0b: >[mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0b: >[mem 0xff000000-0xffffffff] has been reserved
system 00:0b: >[mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0b: >[mem 0xdfa00000-0xdfa00fff] has been reserved
system 00:0b: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: >[mem 0x20000000-0x201fffff]
pnp 00:0c: >[mem 0x40004000-0x40004fff]
system 00:0c: >[mem 0x20000000-0x201fffff] has been reserved
system 00:0c: >[mem 0x40004000-0x40004fff] has been reserved
system 00:0c: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: >PCI bridge to [bus 01-01]
pci 0000:00:1c.5: >PCI bridge to [bus 02-02]
pci 0000:00:1c.5: > bridge window [io 0xe000-0xefff]
pci 0000:00:1c.5: > bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:00:1c.7: >PCI bridge to [bus 03-03]
pci 0000:00:1c.7: > bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.7: > bridge window [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 7 [mem 0xdfa00000-0xfeafffff]
pci_bus 0000:02: >resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: >resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:03: >resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: >resource 1 [mem 0xf7c00000-0xf7cfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: >Boot video device
Freeing initrd memory: 15052k freed
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x8c470000-0x9046ffff] (64MB) mapped at [ffff88008c470000-ffff88009046ffff]
audit: initializing netlink socket (disabled)
type=2000 audit(1367237527.296:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 29981
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, mapped to 0xffffc9000b700000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: >version 3.0
ahci 0000:00:1f.2: >irq 42 for MSI/MSI-X
ahci 0000:00:1f.2: >AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: >flags: 64bit ncq pm led clo pio slum part ems apst
ahci 0000:00:1f.2: >setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16180 irq 42
ata3: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16200 irq 42
ata4: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16280 irq 42
ata5: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16300 irq 42
ata6: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16380 irq 42
ahci 0000:03:00.0: >irq 43 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:03:00.0: >AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: >flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xf7c00000 port 0xf7c00100 irq 43
ata8: SATA max UDMA/133 abar m512@0xf7c00000 port 0xf7c00180 irq 43
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: >setting latency timer to 64
ehci_hcd 0000:00:1a.0: >EHCI Host Controller
ehci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: >debug port 2
ehci_hcd 0000:00:1a.0: >cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: >irq 16, io mem 0xf7d18000
ehci_hcd 0000:00:1a.0: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb1: >SerialNumber: 0000:00:1a.0
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >2 ports detected
ehci_hcd 0000:00:1d.0: >setting latency timer to 64
ehci_hcd 0000:00:1d.0: >EHCI Host Controller
ehci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: >debug port 2
ehci_hcd 0000:00:1d.0: >cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: >irq 23, io mem 0xf7d17000
ehci_hcd 0000:00:1d.0: >USB 2.0 started, EHCI 1.00
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: EHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb2: >SerialNumber: 0000:00:1d.0
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: >setting latency timer to 64
xhci_hcd 0000:00:14.0: >xHCI Host Controller
xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: >cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: >irq 16, io mem 0xf7d00000
xhci_hcd 0000:00:14.0: >irq 44 for MSI/MSI-X
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: xHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb3: >SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >4 ports detected
xhci_hcd 0000:00:14.0: >xHCI Host Controller
xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 4
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: xHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb4: >SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >4 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: >RTC can wake from S4
rtc_cmos 00:06: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 9:606:229
rtc_cmos 00:06: >setting system clock to 2013-04-29 12:12:07 UTC (1367237527)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2: SATA link down (SStatus 0 SControl 300)
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
usb 1-1: >new high-speed USB device number 2 using ehci_hcd
ata3.00: ATA-7: ST3500830AS, 3.AAD, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: ATA-7: ST3500830AS, 3.AAD, max UDMA/133
ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: ATA-7: ST3500830AS, 3.AAD, max UDMA/133
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata6.00: ATA-7: ST3500830AS, 3.AAD, max UDMA/133
ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: configured for UDMA/133
ata5.00: configured for UDMA/133
scsi 2:0:0:0: >Direct-Access ATA ST3500830AS 3.AA PQ: 0 ANSI: 5
sd 2:0:0:0: >Attached scsi generic sg0 type 0
sd 2:0:0:0: >[sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: >[sda] Write Protect is off
sd 2:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata4.00: configured for UDMA/133
ata6.00: configured for UDMA/133
sda: sda1
sda: p1 size 2930300928 extends beyond EOD, enabling native capacity
sda: sda1
sda: p1 size 2930300928 extends beyond EOD, truncated
sd 2:0:0:0: >[sda] Attached SCSI disk
scsi 3:0:0:0: >Direct-Access ATA ST3500830AS 3.AA PQ: 0 ANSI: 5
sd 3:0:0:0: >[sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:0:0: >Attached scsi generic sg1 type 0
sd 3:0:0:0: >[sdb] Write Protect is off
sd 3:0:0:0: >[sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: >[sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-1: >New USB device found, idVendor=8087, idProduct=0024
usb 1-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: >USB hub found
hub 1-1:1.0: >6 ports detected
sdb: unknown partition table
sd 3:0:0:0: >[sdb] Attached SCSI disk
scsi 4:0:0:0: >Direct-Access ATA ST3500830AS 3.AA PQ: 0 ANSI: 5
sd 4:0:0:0: >[sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: >Attached scsi generic sg2 type 0
sd 4:0:0:0: >[sdc] Write Protect is off
sd 4:0:0:0: >[sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: >[sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7.00: ATA-9: Samsung SSD 840 Series, DXT07B0Q, max UDMA/133
ata7.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata7.00: configured for UDMA/133
sdc: unknown partition table
sd 4:0:0:0: >[sdc] Attached SCSI disk
scsi 5:0:0:0: >Direct-Access ATA ST3500830AS 3.AA PQ: 0 ANSI: 5
sd 5:0:0:0: >[sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 5:0:0:0: >Attached scsi generic sg3 type 0
sd 5:0:0:0: >[sdd] Write Protect is off
sd 5:0:0:0: >[sdd] Mode Sense: 00 3a 00 00
sd 5:0:0:0: >[sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sdd: p1 size 2930300928 extends beyond EOD, enabling native capacity
sdd: sdd1
sdd: p1 size 2930300928 extends beyond EOD, truncated
sd 5:0:0:0: >[sdd] Attached SCSI disk
scsi 6:0:0:0: >Direct-Access ATA Samsung SSD 840 DXT0 PQ: 0 ANSI: 5
sd 6:0:0:0: >[sde] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 6:0:0:0: >Attached scsi generic sg4 type 0
sd 6:0:0:0: >[sde] Write Protect is off
sd 6:0:0:0: >[sde] Mode Sense: 00 3a 00 00
sd 6:0:0:0: >[sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1 sde2 sde3
sd 6:0:0:0: >[sde] Attached SCSI disk
usb 2-1: >new high-speed USB device number 2 using ehci_hcd
usb 2-1: >New USB device found, idVendor=8087, idProduct=0024
usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: >USB hub found
hub 2-1:1.0: >8 ports detected
ata8: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 928k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1472k freed
Freeing unused kernel memory: 1124k freed
udevd[115]: starting version 175
xor: automatically using best checksumming function:
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: >irq 45 for MSI/MSI-X
r8169 0000:02:00.0: >eth0: RTL8168evl/8111evl at 0xffffc90000052000, bc:5f:f4:95:ce:6b, XID 0c900800 IRQ 45
r8169 0000:02:00.0: >eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
avx : 26406.000 MB/sec
device-mapper: dm-raid45: initialized v0.2594b
Refined TSC clocksource calibration: 3400.023 MHz.
Switching to clocksource tsc
usb 2-1.5: >new high-speed USB device number 3 using ehci_hcd
EXT4-fs (sde2): INFO: recovery required on readonly filesystem
EXT4-fs (sde2): write access will be enabled during recovery
usb 2-1.5: >New USB device found, idVendor=0bda, idProduct=8171
usb 2-1.5: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.5: >Manufacturer: Manufacturer
usb 2-1.5: >SerialNumber: 00e04c000001
usb 2-1.6: >new high-speed USB device number 4 using ehci_hcd
usb 2-1.6: >New USB device found, idVendor=2040, idProduct=6502
usb 2-1.6: >New USB device strings: Mfr=0, Product=1, SerialNumber=2
usb 2-1.6: >Product: WinTV HVR-900
usb 2-1.6: >SerialNumber: 4030640972
usb 2-1.7: >new high-speed USB device number 5 using ehci_hcd
usb 2-1.7: >New USB device found, idVendor=045e, idProduct=0766
usb 2-1.7: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.7: >Product: Microsoft LifeCam VX-800
usb 2-1.7: >Manufacturer: Microsoft
EXT4-fs (sde2): recovery complete
EXT4-fs (sde2): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1.8: >new full-speed USB device number 6 using ehci_hcd
usb 2-1.8: >New USB device found, idVendor=046d, idProduct=c52e
usb 2-1.8: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.8: >Product: USB Receiver
usb 2-1.8: >Manufacturer: Logitech
device-mapper: dm-raid45: /dev/sda is raid disk 0
device-mapper: dm-raid45: /dev/sdb is raid disk 1
device-mapper: dm-raid45: /dev/sdc is raid disk 2
device-mapper: dm-raid45: /dev/sdd is raid disk 3
device-mapper: dm-raid45: 128/128/256 sectors chunk/io/recovery size, 80 stripes
algorithm "xor_32", 8 chunks with 21843MB/s
RAID5 (left asymmetric) set with net 3/4 devices
Adding 999996k swap on /dev/sde3. Priority:-1 extents:1 across:999996k SS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[557]: starting version 175
lp: driver loaded but no devices found
mei 0000:00:16.0: >setting latency timer to 64
mei 0000:00:16.0: >irq 46 for MSI/MSI-X
EXT4-fs (sde2): re-mounted. Opts: errors=remount-ro
[drm] Initialized drm 1.1.0 20060810
ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPR2 1 (20120320/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 2 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
mei 0000:00:16.0: >wd: failed to find the client
checking generic (e0000000 300000) vs hw (0 0)
i915 0000:00:02.0: >setting latency timer to 64
pci 0000:00:00.0: >Intel Ivybridge Chipset
pci 0000:00:00.0: >detected gtt size: 2097152K total, 262144K mappable
pci 0000:00:00.0: >no pre-allocated video memory detected
i915 0000:00:02.0: >irq 47 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x15
r8712u: module is from the staging directory, the quality is unknown, you have been warned.
r8712u: DriverVersion: v7_0.20100831
r8712u: register rtl8712_netdev_ops to netdev_ops
r8712u: USB_SPEED_HIGH with 4 endpoints
r8712u: Boot from EFUSE: Autoload OK
device-mapper: multipath: version 1.4.0 loaded
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Linux video capture interface: v2.00
usbcore: registered new interface driver snd-usb-audio
uvcvideo: Found UVC 1.00 device Microsoft LifeCam VX-800 (045e:0766)
input: Microsoft LifeCam VX-800 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input2
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
em28xx: New device WinTV HVR-900 @ 480 Mbps (2040:6502, interface 0, class 0)
em28xx: Audio Vendor Class interface 0 found
em28xx: Video interface 0 found
em28xx: DVB interface 0 found
em28xx #0: chip ID is em2882/em2883
microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x15
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/input/input3
hid-generic 0003:046D:C52E.0001: >input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.8/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.1/input/input4
hid-generic 0003:046D:C52E.0002: >input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.8/input1
microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x15
microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x15
microcode: Microcode Update Driver: v2.00 , Peter Oruba
[drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18
em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00
em28xx #0: i2c eeprom 70: 33 00 30 00 36 00 34 00 30 00 39 00 37 00 32 00
em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00
em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00
em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 38 89
em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 4c b3
em28xx #0: i2c eeprom c0: 3e f0 74 02 01 00 01 79 fd 00 00 00 00 00 00 00
em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 38 89
em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 4c b3
em28xx #0: i2c eeprom f0: 3e f0 74 02 01 00 01 79 fd 00 00 00 00 00 00 00
em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x581739dd
em28xx #0: EEPROM info:
em28xx #0: AC97 audio (5 sample rates)
em28xx #0: 500mA max power
em28xx #0: Table at 0x24, strings=0x1e82, 0x186a, 0x0000
em28xx #0: Identified as Hauppauge WinTV HVR 900 (R2) (card=18)
tveeprom 9-0050: Hauppauge model 65018, rev B3C0, serial# 4109132
tveeprom 9-0050: tuner model is Xceive XC3028 (idx 120, type 71)
tveeprom 9-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4)
tveeprom 9-0050: audio processor is None (idx 0)
tveeprom 9-0050: has radio
tvp5150 9-005c: chip found @ 0xb8 (em28xx #0)
tvp5150 9-005c: tvp5150am1 detected.
tuner 9-0061: Tuner -1 found with type(s) Radio TV.
xc2028 9-0061: creating new instance
xc2028 9-0061: type set to XCeive xc2028/xc3028 tuner
xc2028 9-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
xc2028 9-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
r8712u: CustomerID = 0x0000
r8712u: MAC Address from efuse = f4:ec:38:e7:7c:4c
r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
usbcore: registered new interface driver r8712u
init: failsafe main process (1183) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
ppdev: user-space parallel port driver
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
fbcon: inteldrmfb (fb0) is primary device
r8169 0000:02:00.0: >eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
xc2028 9-0061: Loading firmware for type=MTS (4), id 000000000000b700.
em28xx #0: Config register raw data: 0xd0
em28xx #0: AC97 vendor ID = 0xffffffff
em28xx #0: AC97 features = 0x6a90
em28xx #0: Empia 202 AC97 audio processor detected
Console: switching to colour frame buffer device 240x67
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
acpi device:42: >registered as cooling_device4
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:1b.0: >enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: >irq 48 for MSI/MSI-X
em28xx #0: v4l2 driver version 0.1.3
xc2028 9-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
r8712u: 1 RCR=0x153f00e
r8712u: 2 RCR=0x553f00e
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
lirc_dev: IR Remote Control driver registered, major 250
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x195 offMax=0x4f7f
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.12 (interface 0x001a0004).
MTS (4), id 00000000000000ff:
xc2028 9-0061: Loading firmware for type=MTS (4), id 0000000100000007.
vboxpci: IOMMU not found (not registered)
init: plymouth-stop pre-start process (1860) terminated with status 1
em28xx #0: V4L2 video device registered as video1
em28xx #0: V4L2 VBI device registered as vbi0
usbcore: registered new interface driver em28xx
em28xx-audio.c: probing for em28xx Audio Vendor Class
em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab
Em28xx: Initialized (Em28xx Audio Extension) extension
xc2028 9-0061: attaching existing instance
xc2028 9-0061: type set to XCeive xc2028/xc3028 tuner
em28xx #0: em28xx #0/2: xc3028 attached
DVB: registering new adapter (em28xx #0)
DVB: registering adapter 0 frontend 0 (Micronas DRXD DVB-T)...
em28xx #0: Successfully loaded em28xx-dvb
Em28xx: Initialized (Em28xx dvb Extension) extension
Registered IR keymap rc-hauppauge
input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/rc/rc0/input13
rc0: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/rc/rc0
Em28xx: Initialized (Em28xx Input Extension) extension
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready