dmesg - EXT4
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.7-201.fc18.x86_64 ([email protected]) (gcc version 4.7.2 20121109 (Red Hat 4.7.2-8) (GCC) ) #1 SMP Fri Apr 12 19:46:19 UTC 2013
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000c3a7bfff] usable
BIOS-e820: [mem 0x00000000c3a7c000-0x00000000c3a81fff] reserved
BIOS-e820: [mem 0x00000000c3a82000-0x00000000c3b48fff] usable
BIOS-e820: [mem 0x00000000c3b49000-0x00000000c3b5bfff] reserved
BIOS-e820: [mem 0x00000000c3b5c000-0x00000000c3bdcfff] ACPI NVS
BIOS-e820: [mem 0x00000000c3bdd000-0x00000000c3c0efff] reserved
BIOS-e820: [mem 0x00000000c3c0f000-0x00000000c3c5cfff] usable
BIOS-e820: [mem 0x00000000c3c5d000-0x00000000c3e67fff] reserved
BIOS-e820: [mem 0x00000000c3e68000-0x00000000c3ee7fff] ACPI NVS
BIOS-e820: [mem 0x00000000c3ee8000-0x00000000c3f0efff] reserved
BIOS-e820: [mem 0x00000000c3f0f000-0x00000000c3f16fff] usable
BIOS-e820: [mem 0x00000000c3f17000-0x00000000c3f1efff] reserved
BIOS-e820: [mem 0x00000000c3f1f000-0x00000000c3f6dfff] usable
BIOS-e820: [mem 0x00000000c3f6e000-0x00000000c3f79fff] ACPI NVS
BIOS-e820: [mem 0x00000000c3f7a000-0x00000000c3f7cfff] ACPI data
BIOS-e820: [mem 0x00000000c3f7d000-0x00000000c3f80fff] ACPI NVS
BIOS-e820: [mem 0x00000000c3f81000-0x00000000c3f81fff] ACPI data
BIOS-e820: [mem 0x00000000c3f82000-0x00000000c3f8afff] ACPI NVS
BIOS-e820: [mem 0x00000000c3f8b000-0x00000000c3f8bfff] ACPI data
BIOS-e820: [mem 0x00000000c3f8c000-0x00000000c3f9efff] ACPI NVS
BIOS-e820: [mem 0x00000000c3f9f000-0x00000000c3ffefff] ACPI data
BIOS-e820: [mem 0x00000000c3fff000-0x00000000c3ffffff] usable
BIOS-e820: [mem 0x00000000c4000000-0x00000000c5ffffff] reserved
BIOS-e820: [mem 0x00000000c7800000-0x00000000c7ffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: LENOVO 4318CTO/4318CTO, BIOS 6NET61WW (1.24 ) 06/07/2010
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x138000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-DBFFF uncachable
DC000-FFFFF write-protect
MTRR variable ranges enabled:
0 disabled
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0C0000000 mask FF8000000 write-back
4 base 100000000 mask FE0000000 write-back
5 base 120000000 mask FF0000000 write-back
6 base 130000000 mask FF8000000 write-back
7 base 0C4000000 mask FFE000000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 1, base: 0GB, range: 2GB, type WB
reg 2, base: 2GB, range: 1GB, type WB
reg 3, base: 3GB, range: 128MB, type WB
reg 4, base: 4GB, range: 512MB, type WB
reg 5, base: 4608MB, range: 256MB, type WB
reg 6, base: 4864MB, range: 128MB, type WB
reg 7, base: 3136MB, range: 32MB, type UC
total RAM covered: 4064M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 256M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 64MB, type WB
reg 3, base: 3168MB, range: 32MB, type WB
reg 4, base: 4GB, range: 1GB, type WB
reg 5, base: 4992MB, range: 128MB, type UC
e820: update [mem 0xc4000000-0xc5ffffff] usable ==> reserved
e820: update [mem 0xc8000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xc4000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f68c0-0x000f68cf] mapped at [ffff8800000f68c0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0xc3ffffff]
[mem 0x00000000-0xc3ffffff] page 2M
kernel direct mapping tables up to 0xc3ffffff @ [mem 0x1fffb000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x137ffffff]
[mem 0x100000000-0x137ffffff] page 2M
kernel direct mapping tables up to 0x137ffffff @ [mem 0xc3f6c000-0xc3f6dfff]
RAMDISK: [mem 0x341a8000-0x360cbfff]
ACPI: RSDP 00000000000f6890 00024 (v02 LENOVO)
ACPI: XSDT 00000000c3ff1af3 0009C (v01 LENOVO TP-6N 00001240 LTP 00000000)
ACPI: FACP 00000000c3ff1c00 000F4 (v04 LENOVO TP-6N 00001240 LNVO 00000001)
ACPI: DSDT 00000000c3ff1e9b 0CC73 (v01 LENOVO TP-6N 00001240 MSFT 03000001)
ACPI: FACS 00000000c3ee7000 00040
ACPI: SSDT 00000000c3ff1db4 000E7 (v01 LENOVO TP-6N 00001240 MSFT 03000001)
ACPI: ECDT 00000000c3ffeb0e 00052 (v01 LENOVO TP-6N 00001240 LNVO 00000001)
ACPI: APIC 00000000c3ffeb60 000BC (v01 LENOVO TP-6N 00001240 LNVO 00000001)
ACPI: MCFG 00000000c3ffec1c 0003C (v01 LENOVO TP-6N 00001240 LNVO 00000001)
ACPI: HPET 00000000c3ffec58 00038 (v01 LENOVO TP-6N 00001240 LNVO 00000001)
ACPI: ASF! 00000000c3ffedbe 000A4 (v16 LENOVO TP-6N 00001240 PTL 00000001)
ACPI: SLIC 00000000c3ffee62 00176 (v01 LENOVO TP-6N 00001240 LTP 00000000)
ACPI: BOOT 00000000c3ffefd8 00028 (v01 LENOVO TP-6N 00001240 LTP 00000001)
ACPI: SSDT 00000000c3ee591a 0084B (v01 LENOVO TP-6N 00001240 INTL 20050513)
ACPI: TCPA 00000000c3f8b000 00032 (v02 PTL CRESTLN 06040000 00005A52)
ACPI: DMAR 00000000c3f81000 00068 (v01 INTEL CP_FIELD 00000001 INTL 00000001)
ACPI: SSDT 00000000c3f7c000 009F1 (v01 PmRef CpuPm 00003000 INTL 20050513)
ACPI: SSDT 00000000c3f7b000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20050513)
ACPI: SSDT 00000000c3f7a000 0049F (v01 PmRef ApTst 00003000 INTL 20050513)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000137ffffff]
Initmem setup node 0 [mem 0x00000000-0x137ffffff]
NODE_DATA [mem 0x137fec000-0x137ffffff]
[ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880133600000-ffff8801375fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x137ffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009dfff]
node 0: [mem 0x00100000-0xc3a7bfff]
node 0: [mem 0xc3a82000-0xc3b48fff]
node 0: [mem 0xc3c0f000-0xc3c5cfff]
node 0: [mem 0xc3f0f000-0xc3f16fff]
node 0: [mem 0xc3f1f000-0xc3f6dfff]
node 0: [mem 0xc3fff000-0xc3ffffff]
node 0: [mem 0x100000000-0x137ffffff]
On node 0 totalpages: 1031031
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3912 pages, LIFO batch:0
DMA32 zone: 12464 pages used for memmap
DMA32 zone: 785209 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 225792 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
PM: Registered nosave memory: 00000000c3a7c000 - 00000000c3a82000
PM: Registered nosave memory: 00000000c3b49000 - 00000000c3b5c000
PM: Registered nosave memory: 00000000c3b5c000 - 00000000c3bdd000
PM: Registered nosave memory: 00000000c3bdd000 - 00000000c3c0f000
PM: Registered nosave memory: 00000000c3c5d000 - 00000000c3e68000
PM: Registered nosave memory: 00000000c3e68000 - 00000000c3ee8000
PM: Registered nosave memory: 00000000c3ee8000 - 00000000c3f0f000
PM: Registered nosave memory: 00000000c3f17000 - 00000000c3f1f000
PM: Registered nosave memory: 00000000c3f6e000 - 00000000c3f7a000
PM: Registered nosave memory: 00000000c3f7a000 - 00000000c3f7d000
PM: Registered nosave memory: 00000000c3f7d000 - 00000000c3f81000
PM: Registered nosave memory: 00000000c3f81000 - 00000000c3f82000
PM: Registered nosave memory: 00000000c3f82000 - 00000000c3f8b000
PM: Registered nosave memory: 00000000c3f8b000 - 00000000c3f8c000
PM: Registered nosave memory: 00000000c3f8c000 - 00000000c3f9f000
PM: Registered nosave memory: 00000000c3f9f000 - 00000000c3fff000
PM: Registered nosave memory: 00000000c4000000 - 00000000c6000000
PM: Registered nosave memory: 00000000c6000000 - 00000000c7800000
PM: Registered nosave memory: 00000000c7800000 - 00000000c8000000
PM: Registered nosave memory: 00000000c8000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000feaff000
PM: Registered nosave memory: 00000000feaff000 - 00000000feb00000
PM: Registered nosave memory: 00000000feb00000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
e820: [mem 0xc8000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880137c00000 s84608 r8192 d21888 u262144
pcpu-alloc: s84608 r8192 d21888 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1014913
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Memory: 3943708k/5111808k available (6526k kernel code, 987684k absent, 180416k reserved, 6694k data, 1088k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
NR_IRQS:8448 nr_irqs:744 16
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1595.984 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.96 BogoMIPS (lpj=1595984)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 24337 entries in 96 pages
dmar: Host address width 36
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f020e2
dmar: RMRR base: 0x000000c3ee9000 end: 0x000000c3efffff
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz (fam: 06, model: 1e, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
Brought up 8 CPUs
smpboot: Total of 8 processors activated (25535.74 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xc3b5c000-0xc3bdcfff] (528384 bytes)
PM: Registering ACPI NVS region [mem 0xc3e68000-0xc3ee7fff] (524288 bytes)
PM: Registering ACPI NVS region [mem 0xc3f6e000-0xc3f79fff] (49152 bytes)
PM: Registering ACPI NVS region [mem 0xc3f7d000-0xc3f80fff] (16384 bytes)
PM: Registering ACPI NVS region [mem 0xc3f82000-0xc3f8afff] (36864 bytes)
PM: Registering ACPI NVS region [mem 0xc3f8c000-0xc3f9efff] (77824 bytes)
atomic64 test passed for x86-64 platform with CX8 and with SSE
RTC time: 0:09:34, date: 04/18/13
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: EC description table is found, configuring boot EC
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000c3f1ac18 00385 (v01 PmRef Cpu0Ist 00003000 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00385 (v01 PmRef Cpu0Ist 00003000 INTL 20050513)
ACPI: SSDT 00000000c3f18718 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20050513)
ACPI: SSDT 00000000c3f19a98 00303 (v01 PmRef ApIst 00003000 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20050513)
ACPI: SSDT 00000000c3f17d98 00119 (v01 PmRef ApCst 00003000 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20050513)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [PUBS] (on)
ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
ACPI: ACPI Dock Station Driver: 2 docks/bays found
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:00.0: [8086:2c52] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000
pci0000:ff: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:ff: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0xc8000000-0xfebfffff]
pci 0000:00:00.0: [8086:d132] type 00 class 0x060000
pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xf2627800-0xf262780f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002
pci 0000:00:16.3: reg 10: [io 0x1800-0x1807]
pci 0000:00:16.3: reg 14: [mem 0xf2624000-0xf2624fff]
pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
pci 0000:00:19.0: reg 10: [mem 0xf2600000-0xf261ffff]
pci 0000:00:19.0: reg 14: [mem 0xf2625000-0xf2625fff]
pci 0000:00:19.0: reg 18: [io 0x1820-0x183f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xf2628000-0xf26283ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf2620000-0xf2623fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:3b50] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xf2628400-0xf26287ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f]
pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f]
pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817]
pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b]
pci 0000:00:1f.2: reg 20: [io 0x1840-0x185f]
pci 0000:00:1f.2: reg 24: [mem 0xf2627000-0xf26277ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf2628800-0xf26288ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x1860-0x187f]
pci 0000:01:00.0: [10de:0a3c] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xcc000000-0xccffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:01:00.1: [10de:0be2] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xcdefc000-0xcdefffff]
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:03.0: bridge window [mem 0xcc000000-0xcdefffff]
pci 0000:00:03.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:4238] type 00 class 0x028000
pci 0000:03:00.0: reg 10: [mem 0xf2000000-0xf2001fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
pci 0000:00:1c.3: bridge window [mem 0xf2700000-0xf27fffff 64bit pref]
pci 0000:0d:00.0: [1180:e822] type 00 class 0x080500
pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
pci 0000:0d:00.0: reg 10: [mem 0xf2100000-0xf21000ff]
pci 0000:0d:00.0: supports D1 D2
pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0d:00.1: [1180:e230] type 00 class 0x088000
pci 0000:0d:00.1: reg 10: [mem 0xf2100400-0xf21004ff]
pci 0000:0d:00.1: supports D1 D2
pci 0000:0d:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 0d]
pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff]
pci 0000:0f:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:0f:00.0: reg 10: [mem 0xf2200000-0xf2201fff 64bit]
pci 0000:0f:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 0f-16]
pci 0000:00:1c.6: bridge window [mem 0xf2200000-0xf22fffff]
pci 0000:17:00.0: [1180:e822] type 00 class 0x080500
pci 0000:17:00.0: MMC controller base frequency changed to 50Mhz.
pci 0000:17:00.0: reg 10: [mem 0xf2300000-0xf23000ff]
pci 0000:17:00.0: supports D1 D2
pci 0000:17:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:17:00.3: [1180:e832] type 00 class 0x0c0010
pci 0000:17:00.3: reg 10: [mem 0xf2300800-0xf2300fff]
pci 0000:17:00.3: supports D1 D2
pci 0000:17:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 17-1e]
pci 0000:00:1c.7: bridge window [mem 0xf2300000-0xf23fffff]
pci 0000:00:1e.0: PCI bridge to [bus 1f] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc8000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP8._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xc3a7c000-0xc3ffffff]
e820: reserve RAM buffer [mem 0xc3b49000-0xc3ffffff]
e820: reserve RAM buffer [mem 0xc3c5d000-0xc3ffffff]
e820: reserve RAM buffer [mem 0xc3f17000-0xc3ffffff]
e820: reserve RAM buffer [mem 0xc3f6e000-0xc3ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 40 for MSI
hpet: hpet3 irq 41 for MSI
hpet: hpet4 irq 42 for MSI
hpet: hpet5 irq 43 for MSI
hpet: hpet6 irq 44 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xc7ffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: [io 0x1000-0x107f] has been reserved
system 00:01: [io 0x1180-0x11ff] has been reserved
system 00:01: [io 0x0800-0x080f] has been reserved
system 00:01: [io 0x15e0-0x15ef] has been reserved
system 00:01: [io 0x1600-0x1641] has been reserved
system 00:01: [io 0x1644-0x167f] could not be reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xf2626000-0xf2626fff] has been reserved
system 00:01: [mem 0xc8000000-0xc8000fff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:01:00.0: BAR 6: assigned [mem 0xcd000000-0xcd07ffff pref]
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:03.0: bridge window [mem 0xcc000000-0xcdefffff]
pci 0000:00:03.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
pci 0000:00:1c.3: bridge window [mem 0xf2700000-0xf27fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0d]
pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff]
pci 0000:00:1c.6: PCI bridge to [bus 0f-16]
pci 0000:00:1c.6: bridge window [mem 0xf2200000-0xf22fffff]
pci 0000:00:1c.7: PCI bridge to [bus 17-1e]
pci 0000:00:1c.7: bridge window [mem 0xf2300000-0xf23fffff]
pci 0000:00:1e.0: PCI bridge to [bus 1f]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0xc8000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xcc000000-0xcdefffff]
pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf2000000-0xf20fffff]
pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
pci_bus 0000:05: resource 2 [mem 0xf2700000-0xf27fffff 64bit pref]
pci_bus 0000:0d: resource 1 [mem 0xf2100000-0xf21fffff]
pci_bus 0000:0f: resource 1 [mem 0xf2200000-0xf22fffff]
pci_bus 0000:17: resource 1 [mem 0xf2300000-0xf23fffff]
pci_bus 0000:1f: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:1f: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:1f: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:1f: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:1f: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:1f: resource 9 [mem 0xc8000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 31888k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbfa7c000-0xc3a7c000] (64MB) mapped at [ffff8800bfa7c000-ffff8800c3a7bfff]
Simple Boot Flag at 0x35 set to 0x1
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1366243775.061:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7764
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: Slot [1] registered
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xcf000000, mapped to 0xffffc90010800000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1E
intel_idle: lapic_timer_reliable_states 0x2
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (48 C)
GHES: HEST is not enabled!
0000:00:16.3: ttyS0 at I/O 0x1800 (irq = 17) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
ACPI: Battery Slot [BAT0] (battery present)
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627100 irq 45
ata2: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627180 irq 45
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627300 irq 45
ata6: SATA max UDMA/133 abar m2048@0xf2627000 port 0xf2627380 irq 45
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xf2628000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.7-201.fc18.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 19, io mem 0xf2628400
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.7-201.fc18.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:0f:00.0: xHCI Host Controller
xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:0f:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 50 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 51 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 52 for MSI/MSI-X
xhci_hcd 0000:0f:00.0: irq 53 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.7-201.fc18.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:0f:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:0f:00.0: xHCI Host Controller
xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.7-201.fc18.x86_64 xhci_hcd
usb usb4: SerialNumber: 0000:0f:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: [email protected]
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
MODSIGN: Loaded cert 'Fedora kernel signing key: 8bd4ab975520ca8f135cfd3567f441c29c215844'
registered taskstats version 1
Magic number: 9:950:152
rtc_cmos 00:06: setting system clock to 2013-04-18 00:09:35 UTC (1366243775)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-7: INTEL SSDSA2M160G2GC, 2CV102HD, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M160 2CV1 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 > sda3
usb 1-1: new high-speed USB device number 2 using ehci-pci
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: ATAPI: MATSHITADVD-RAM UJ890, SB01, max UDMA/100
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ890 SB01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.3: new full-speed USB device number 3 using ehci-pci
usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: Product: Biometric Coprocessor
usb 1-1.3: Manufacturer: UPEK
tsc: Refined TSC clocksource calibration: 1595.999 MHz
Switching to clocksource tsc
usb 1-1.4: new full-speed USB device number 4 using ehci-pci
ata5: SATA link down (SStatus 0 SControl 300)
usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: Broadcom Bluetooth Device
usb 1-1.4: Manufacturer: Broadcom Corp
usb 1-1.4: SerialNumber: 78DD08AE4297
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 578367
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
usb 1-1.6: new high-speed USB device number 5 using ehci-pci
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
usb 1-1.6: New USB device found, idVendor=17ef, idProduct=480f
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6: Product: Integrated Camera
usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
ata6: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 1088k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1656k freed
Freeing unused kernel memory: 1344k freed
systemd[1]: systemd 197 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
systemd[1]: Running in initial RAM disk.
systemd[1]: No hostname configured.
systemd[1]: Set hostname to .
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd[1]: Starting Sockets.
systemd[1]: Reached target Sockets.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Starting Swap.
systemd[1]: Reached target Swap.
systemd[1]: Starting Local File Systems.
systemd[1]: Reached target Local File Systems.
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
systemd-udevd[199]: starting version 197
wmi: Mapper loaded
acpi device:03: registered as cooling_device8
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input5
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 54 for MSI/MSI-X
sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 1)
sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[drm] Initialized drm 1.1.0 20060810
mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
MXM: GUID detected in BIOS
checking generic (cf000000 130000) vs hw (d0000000 10000000)
checking generic (cf000000 130000) vs hw (ce000000 2000000)
fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a5e00a2
nouveau [ DEVICE][0000:01:00.0] Chipset: GT216 (NVA5)
nouveau [ DEVICE][0000:01:00.0] Family : NV50
nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
firewire_ohci 0000:17:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
sdhci-pci 0000:17:00.0: SDHCI controller found [1180:e822] (rev 1)
sdhci-pci 0000:17:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
mmc1: SDHCI controller on PCI [0000:17:00.0] using DMA
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:03:bd:3b
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
nouveau [ VBIOS][0000:01:00.0] BIT signature found
nouveau [ VBIOS][0000:01:00.0] version 70.16.5f.00.0b
nouveau [ PFB][0000:01:00.0] RAM type: DDR3
nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB
nouveau [ PFB][0000:01:00.0] ZCOMP: 1920 tags
systemd-udevd[236]: renamed network interface eth0 to em1
[TTM] Zone kernel: Available graphics memory: 1989854 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 1024 MiB
nouveau [ DRM] GART: 512 MiB
nouveau [ DRM] BIT BIOS found
nouveau [ DRM] Bios version 70.16.5f.00
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 01800323 00010034
nouveau [ DRM] DCB outp 01: 02811300 00000000
nouveau [ DRM] DCB outp 02: 028223a6 0f220010
nouveau [ DRM] DCB outp 03: 02822362 00020010
nouveau [ DRM] DCB outp 04: 048333b6 0f220010
nouveau [ DRM] DCB outp 05: 04833372 00020010
nouveau [ DRM] DCB outp 06: 088443c6 0f220010
nouveau [ DRM] DCB outp 07: 08844382 00020010
nouveau [ DRM] DCB conn 00: 00000040
nouveau [ DRM] DCB conn 01: 00000100
nouveau [ DRM] DCB conn 02: 00101246
nouveau [ DRM] DCB conn 03: 00202346
nouveau [ DRM] DCB conn 04: 00410446
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
nouveau [ DRM] ACPI backlight interface available, not registering our own
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
nouveau [ DRM] 3 available performance level(s)
nouveau [ DRM] 0: core 135MHz shader 270MHz memory 135MHz voltage 800mV
nouveau [ DRM] 1: core 405MHz shader 810MHz memory 324MHz voltage 850mV
nouveau [ DRM] 3: core 550MHz shader 1210MHz memory 790MHz voltage 930mV
nouveau [ DRM] c: core 405MHz shader 810MHz memory 324MHz voltage 930mV
firewire_core 0000:17:00.3: created device fw0: GUID f0def1ff03bd3bff, S400
nouveau [ DRM] MM: using COPY for buffer copies
nouveau [ DRM] allocated 1600x900 fb: 0x70000, bo ffff88012b567c00
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 200x56
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:01:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 0
systemd-journald[101]: Received SIGTERM
type=1404 audit(1366243779.829:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 95697 rules.
SELinux: 2048 avtab hash slots, 95697 rules.
SELinux: 9 users, 15 roles, 4385 types, 243 bools, 1 sens, 1024 cats
SELinux: 83 classes, 95697 rules
SELinux: Permission attach_queue in class tun_socket not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
SELinux: initialized (dev sda1, type ext4), uses xattr
type=1403 audit(1366243780.061:3): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 243ms 724us.
systemd[1]: Relabelled /dev and /run in 24ms 283us.
systemd-readahead[380]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
systemd-udevd[392]: starting version 197
tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78)
EXT4-fs (sda1): re-mounted. Opts: (null)
thinkpad_acpi: ThinkPad ACPI Extras v0.24
thinkpad_acpi:
thinkpad_acpi: ThinkPad BIOS 6NET61WW (1.24 ), EC 6MHT38WW-1.13
thinkpad_acpi: Lenovo ThinkPad W510, model 4318CTO
thinkpad_acpi: detected a 8-level brightness capable ThinkPad
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
tpm_tis 00:09: TPM is disabled/deactivated (0x6)
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
cfg80211: Calling CRDA to update world regulatory domain
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 55 for MSI/MSI-X
media: Linux media interface: v0.10
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
EDAC MC: Ver: 3.0.0
ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000000000011c0-0x00000000000011cf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
Linux video capture interface: v2.00
Intel(R) Wireless WiFi driver for Linux, in-tree:d
Copyright(c) 2003-2012 Intel Corporation
iwlwifi 0000:03:00.0: irq 56 for MSI/MSI-X
EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50
snd_hda_intel 0000:00:1b.0: irq 57 for MSI/MSI-X
uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480f)
microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x3
input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
microcode: CPU0 updated to revision 0x5, date = 2011-09-01
microcode: CPU1 sig=0x106e5, pf=0x10, revision=0x3
hda_codec: CX20585: BIOS auto-probing.
ALSA sound/pci/hda/hda_auto_parser.c:306 autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
ALSA sound/pci/hda/hda_auto_parser.c:310 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_auto_parser.c:314 hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_auto_parser.c:315 mono: mono_out=0x0
ALSA sound/pci/hda/hda_auto_parser.c:319 inputs:
ALSA sound/pci/hda/hda_auto_parser.c:323 Mic=0x1b
ALSA sound/pci/hda/hda_auto_parser.c:323 Internal Mic=0x23
ALSA sound/pci/hda/hda_auto_parser.c:323 Dock Mic=0x1a
microcode: CPU1 updated to revision 0x5, date = 2011-09-01
microcode: CPU2 sig=0x106e5, pf=0x10, revision=0x3
microcode: CPU2 updated to revision 0x5, date = 2011-09-01
microcode: CPU3 sig=0x106e5, pf=0x10, revision=0x3
microcode: CPU3 updated to revision 0x5, date = 2011-09-01
microcode: CPU4 sig=0x106e5, pf=0x10, revision=0x3
ALSA sound/pci/hda/patch_conexant.c:4587 hda_codec: Enable sync_write for stable communication
microcode: CPU4 updated to revision 0x5, date = 2011-09-01
microcode: CPU5 sig=0x106e5, pf=0x10, revision=0x3
microcode: CPU5 updated to revision 0x5, date = 2011-09-01
microcode: CPU6 sig=0x106e5, pf=0x10, revision=0x3
microcode: CPU6 updated to revision 0x5, date = 2011-09-01
microcode: CPU7 sig=0x106e5, pf=0x10, revision=0x3
microcode: CPU7 updated to revision 0x5, date = 2011-09-01
microcode: Microcode Update Driver: v2.00 , Peter Oruba
input: HDA Intel MID Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel MID Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
hda_intel: Disabling MSI
ALSA sound/pci/hda/hda_intel.c:2848 0000:01:00.1: Handle VGA-switcheroo audio client
ALSA sound/pci/hda/hda_intel.c:1677 0000:01:00.1: Enable delay in RIRB handling
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532
Disabling lock debugging due to kernel taint
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
SPL: Loaded module v0.6.1-1
znvpair: module license 'CDDL' taints kernel.
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
cfg80211: Calling CRDA for country: US
SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
SPL: using hostid 0x00000000
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input15
Adding 4122620k swap on /dev/sda5. Priority:-1 extents:1 across:4122620k SS
ZFS: Loaded module v0.6.1-1, ZFS pool version 5000, ZFS filesystem version 5
psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
ip6_tables: (C) 2000-2006 Netfilter Core Team
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Ebtables v2.0 registered
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
systemd-journald[484]: Received SIGUSR1
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
iscsi: registered transport (cxgb3i)
Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
iscsi: registered transport (cxgb4i)
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.16 (Dec 05, 2012)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Apr 25, 2012)
iscsi: registered transport (bnx2i)
iscsi: registered transport (be2iscsi)
In beiscsi_module_init, tt=ffffffffa09f9000
e1000e 0000:00:19.0: irq 54 for MSI/MSI-X
e1000e 0000:00:19.0: irq 54 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input16
wlan0: authenticate with 60:a4:4c:69:bf:d0
wlan0: send auth to 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: authenticated
wlan0: waiting for beacon from 60:a4:4c:69:bf:d0
wlan0: associate with 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: RX AssocResp from 60:a4:4c:69:bf:d0 (capab=0x411 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cgroup: libvirtd (1590) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
cgroup: "memory" requires setting use_hierarchy to 1 on the root.
cgroup: libvirtd (1590) created nested cgroup for controller "devices" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
cgroup: libvirtd (1590) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
fuse init (API version 7.20)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
TCP: lp registered
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
iwlwifi 0000:03:00.0: Microcode SW error detected. Restarting 0x2000000.
iwlwifi 0000:03:00.0: CSR values:
iwlwifi 0000:03:00.0: (2nd byte of CSR_INT_COALESCING is CSR_INT_PERIODIC_REG)
iwlwifi 0000:03:00.0: CSR_HW_IF_CONFIG_REG: 0X0048d304
iwlwifi 0000:03:00.0: CSR_INT_COALESCING: 0X00000040
iwlwifi 0000:03:00.0: CSR_INT: 0X00000000
iwlwifi 0000:03:00.0: CSR_INT_MASK: 0X00000000
iwlwifi 0000:03:00.0: CSR_FH_INT_STATUS: 0X00000000
iwlwifi 0000:03:00.0: CSR_GPIO_IN: 0X0000000f
iwlwifi 0000:03:00.0: CSR_RESET: 0X00000000
iwlwifi 0000:03:00.0: CSR_GP_CNTRL: 0X080403c5
iwlwifi 0000:03:00.0: CSR_HW_REV: 0X00000074
iwlwifi 0000:03:00.0: CSR_EEPROM_REG: 0X2b820ffd
iwlwifi 0000:03:00.0: CSR_EEPROM_GP: 0X90000001
iwlwifi 0000:03:00.0: CSR_OTP_GP_REG: 0X00030001
iwlwifi 0000:03:00.0: CSR_GIO_REG: 0X00080042
iwlwifi 0000:03:00.0: CSR_GP_UCODE_REG: 0X0000a14b
iwlwifi 0000:03:00.0: CSR_GP_DRIVER_REG: 0X00000000
iwlwifi 0000:03:00.0: CSR_UCODE_DRV_GP1: 0X00000000
iwlwifi 0000:03:00.0: CSR_UCODE_DRV_GP2: 0X00000000
iwlwifi 0000:03:00.0: CSR_LED_REG: 0X00000058
iwlwifi 0000:03:00.0: CSR_DRAM_INT_TBL_REG: 0X88130940
iwlwifi 0000:03:00.0: CSR_GIO_CHICKEN_BITS: 0X27800200
iwlwifi 0000:03:00.0: CSR_ANA_PLL_CFG: 0X00000000
iwlwifi 0000:03:00.0: CSR_HW_REV_WA_REG: 0X0001001a
iwlwifi 0000:03:00.0: CSR_DBG_HPET_MEM_REG: 0Xffff0000
iwlwifi 0000:03:00.0: FH register values:
iwlwifi 0000:03:00.0: FH_RSCSR_CHNL0_STTS_WPTR_REG: 0X10c2d900
iwlwifi 0000:03:00.0: FH_RSCSR_CHNL0_RBDCB_BASE_REG: 0X010e28e0
iwlwifi 0000:03:00.0: FH_RSCSR_CHNL0_WPTR: 0X00000018
iwlwifi 0000:03:00.0: FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X80811114
iwlwifi 0000:03:00.0: FH_MEM_RSSR_SHARED_CTRL_REG: 0X000000fc
iwlwifi 0000:03:00.0: FH_MEM_RSSR_RX_STATUS_REG: 0X07030000
iwlwifi 0000:03:00.0: FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000
iwlwifi 0000:03:00.0: FH_TSSR_TX_STATUS_REG: 0X07ff0001
iwlwifi 0000:03:00.0: FH_TSSR_TX_ERROR_REG: 0X00000000
iwlwifi 0000:03:00.0: Loaded firmware version: 9.221.4.1 build 25532
iwlwifi 0000:03:00.0: Start IWL Error Log Dump:
iwlwifi 0000:03:00.0: Status: 0x000022CC, count: 5
iwlwifi 0000:03:00.0: 0x00000005 | SYSASSERT
iwlwifi 0000:03:00.0: 0x000222EC | uPc
iwlwifi 0000:03:00.0: 0x00022258 | branchlink1
iwlwifi 0000:03:00.0: 0x00022258 | branchlink2
iwlwifi 0000:03:00.0: 0x00001532 | interruptlink1
iwlwifi 0000:03:00.0: 0x00000000 | interruptlink2
iwlwifi 0000:03:00.0: 0x00000078 | data1
iwlwifi 0000:03:00.0: 0x00000031 | data2
iwlwifi 0000:03:00.0: 0x00000237 | line
iwlwifi 0000:03:00.0: 0x0140CEAA | beacon time
iwlwifi 0000:03:00.0: 0x00089156 | tsf low
iwlwifi 0000:03:00.0: 0x00000000 | tsf hi
iwlwifi 0000:03:00.0: 0x00000000 | time gp1
iwlwifi 0000:03:00.0: 0x801D7952 | time gp2
iwlwifi 0000:03:00.0: 0x00000000 | time gp3
iwlwifi 0000:03:00.0: 0x000109DD | uCode version
iwlwifi 0000:03:00.0: 0x00000074 | hw version
iwlwifi 0000:03:00.0: 0x0048D304 | board version
iwlwifi 0000:03:00.0: 0x04240080 | hcmd
iwlwifi 0000:03:00.0: 0x00022080 | isr0
iwlwifi 0000:03:00.0: 0x1143E000 | isr1
iwlwifi 0000:03:00.0: 0x0000011A | isr2
iwlwifi 0000:03:00.0: 0x0141F0C0 | isr3
iwlwifi 0000:03:00.0: 0x00000000 | isr4
iwlwifi 0000:03:00.0: 0x01000112 | isr_pref
iwlwifi 0000:03:00.0: 0x0001536C | wait_event
iwlwifi 0000:03:00.0: 0x00004208 | l2p_control
iwlwifi 0000:03:00.0: 0x00000000 | l2p_duration
iwlwifi 0000:03:00.0: 0x0000033F | l2p_mhvalid
iwlwifi 0000:03:00.0: 0x00200200 | l2p_addr_match
iwlwifi 0000:03:00.0: 0x00000005 | lmpm_pmg_sel
iwlwifi 0000:03:00.0: 0x02061043 | timestamp
iwlwifi 0000:03:00.0: 0x00001828 | flow_handler
iwlwifi 0000:03:00.0: Log capacity 1024 is bogus, limit to 512 entries
iwlwifi 0000:03:00.0: Log write index 544 is bogus, limit to 512
iwlwifi 0000:03:00.0: Start IWL Event Log Dump: display last 20 entries
iwlwifi 0000:03:00.0: EVT_LOGT:2149413162:0x0000006a:1334
iwlwifi 0000:03:00.0: EVT_LOGT:2149413163:0x01a8d473:1334
iwlwifi 0000:03:00.0: EVT_LOGT:2149413164:0x01a8d473:1334
iwlwifi 0000:03:00.0: EVT_LOGT:2149413166:0x01a8d473:1334
iwlwifi 0000:03:00.0: EVT_LOGT:2149413167:0x01a8d473:1334
iwlwifi 0000:03:00.0: EVT_LOGT:2149413169:0x01a8d473:1334
iwlwifi 0000:03:00.0: EVT_LOGT:2149413170:0x00000015:0484
iwlwifi 0000:03:00.0: EVT_LOGT:2149413175:0x001e0000:1334
iwlwifi 0000:03:00.0: EVT_LOGT:2149413180:0x00000073:1334
iwlwifi 0000:03:00.0: EVT_LOGT:2149413181:0x01a8d473:1334
iwlwifi 0000:03:00.0: EVT_LOGT:2149413187:0x001e0000:1334
iwlwifi 0000:03:00.0: EVT_LOGT:2149413192:0x0000006a:1334
iwlwifi 0000:03:00.0: EVT_LOGT:2149413192:0x01a8d473:1334
iwlwifi 0000:03:00.0: EVT_LOGT:2149413197:0x001e0000:1334
iwlwifi 0000:03:00.0: EVT_LOGT:2149413202:0x0000006a:1334
iwlwifi 0000:03:00.0: EVT_LOGT:2149413202:0x01a8d473:1334
iwlwifi 0000:03:00.0: EVT_LOGT:2149413204:0x00000016:0484
iwlwifi 0000:03:00.0: EVT_LOGT:2149413209:0x001e0000:1334
iwlwifi 0000:03:00.0: EVT_LOGT:2149413214:0x00000073:1334
iwlwifi 0000:03:00.0: EVT_LOGT:2149413215:0x01a8d473:1334
iwlwifi 0000:03:00.0: FW error in SYNC CMD REPLY_SCAN_CMD
ieee80211 phy0: Hardware restart was requested
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
wlan0: authenticate with 60:a4:4c:69:bf:d0
wlan0: send auth to 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: authenticated
wlan0: associate with 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: RX AssocResp from 60:a4:4c:69:bf:d0 (capab=0x411 status=0 aid=2)
wlan0: associated
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.