dmesg - sudoku-1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bfecffff] usable
BIOS-e820: [mem 0x00000000bfed0000-0x00000000bfedefff] ACPI NVS
BIOS-e820: [mem 0x00000000bfedf000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
NX (Execute Disable) protection: active
DMI present.
DMI: Acer TravelMate 5720 /Columbia , BIOS V1.32 02/01/2008
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0C0000000 mask FC0000000 uncachable
1 base 000000000 mask F00000000 write-back
2 base 100000000 mask FC0000000 write-back
3 base 0BFF00000 mask FFFF00000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 3GB, range: 1GB, type UC
reg 1, base: 0GB, range: 4GB, type WB
reg 2, base: 4GB, range: 1GB, type WB
reg 3, base: 3071MB, range: 1MB, type UC
total RAM covered: 4095M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3071MB, range: 1MB, type UC
reg 3, base: 4GB, range: 1GB, type WB
e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbfed0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f7d60-0x000f7d6f] mapped at [ffff8800000f7d60]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0xbfecffff]
[mem 0x00000000-0xbfdfffff] page 2M
[mem 0xbfe00000-0xbfecffff] page 4k
kernel direct mapping tables up to 0xbfecffff @ [mem 0x1fffb000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x13fffffff]
[mem 0x100000000-0x13fffffff] page 2M
kernel direct mapping tables up to 0x13fffffff @ [mem 0xbfeca000-0xbfecffff]
RAMDISK: [mem 0x362e0000-0x37167fff]
ACPI: RSDP 00000000000f7bf0 00024 (v02 PTLTD )
ACPI: XSDT 00000000bfed0c33 00094 (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000)
ACPI: FACP 00000000bfedbbd7 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
ACPI: DSDT 00000000bfed2bbb 08FA8 (v02 INTEL CRESTLNE 06040000 MSFT 03000000)
ACPI: FACS 00000000bfedefc0 00040
ACPI: HPET 00000000bfedbccb 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: MCFG 00000000bfedbd03 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: TCPA 00000000bfedbd3f 00032 (v01 Intel CRESTLN 06040000 00005A52)
ACPI: TMOR 00000000bfedbd71 00026 (v01 PTLTD 06040000 PTL 00000003)
ACPI: SLIC 00000000bfedbd97 00176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001)
ACPI: ASF! 00000000bfedbf0d 00063 (v32 OEMID OEMTBL 06040000 PTL 00000001)
ACPI: APIC 00000000bfedbf70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 00000000bfedbfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SSDT 00000000bfed256c 0064F (v01 SataRe SataPri 00001000 INTL 20050624)
ACPI: SSDT 00000000bfed1eda 00692 (v01 SataRe SataSec 00001000 INTL 20050624)
ACPI: SSDT 00000000bfed1253 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 00000000bfed11ad 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
ACPI: SSDT 00000000bfed0cc7 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
Initmem setup node 0 [mem 0x00000000-0x13fffffff]
NODE_DATA [mem 0x13fffc000-0x13fffffff]
[ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x13fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0xbfecffff]
node 0: [mem 0x100000000-0x13fffffff]
On node 0 totalpages: 1048159
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3913 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 765712 pages, LIFO batch:31
Normal zone: 4096 pages used for memmap
Normal zone: 258048 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bfed0000 - 00000000bfedf000
PM: Registered nosave memory: 00000000bfedf000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000
PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s83584 r8192 d22912 u1048576
pcpu-alloc: s83584 r8192 d22912 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027673
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 4030088k/5242880k available (6711k kernel code, 1050244k absent, 162548k reserved, 6459k data, 928k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:512 16
Extended CMOS year: 2000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2393.963 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.92 BogoMIPS (lpj=9575852)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 25118 entries in 99 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 Ok.
CPU1: Thermal monitoring handled by SMI
Brought up 2 CPUs
Total of 2 processors activated (9575.85 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbfed0000-0xbfedefff] (61440 bytes)
dummy:
RTC time: 15:44:30, date: 04/16/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Extensa 5220 detected - disabling mwait for CPU C-states
ACPI: SSDT 00000000bfed1b56 002BC (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 002BC (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 00000000bfed14b2 0061F (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0061F (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT 00000000bfed1e12 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: SSDT 00000000bfed1ad1 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
Freeing initrd memory: 14880k freed
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: >host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: >host bridge window [mem 0xc0000000-0xdfffffff]
pci_root PNP0A08:00: >host bridge window [mem 0xf0000000-0xfebfffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: >root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: >root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: >root bus resource [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: >root bus resource [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: >[8086:2a00] type 00 class 0x060000
pci 0000:00:01.0: >[8086:2a01] type 01 class 0x060400
pci 0000:00:01.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: >[8086:2834] type 00 class 0x0c0300
pci 0000:00:1a.0: >reg 20: [io 0x1800-0x181f]
pci 0000:00:1a.1: >[8086:2835] type 00 class 0x0c0300
pci 0000:00:1a.1: >reg 20: [io 0x1820-0x183f]
pci 0000:00:1a.7: >[8086:283a] type 00 class 0x0c0320
pci 0000:00:1a.7: >reg 10: [mem 0xfc304000-0xfc3043ff]
pci 0000:00:1a.7: >PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: >[8086:284b] type 00 class 0x040300
pci 0000:00:1b.0: >reg 10: [mem 0xfc300000-0xfc303fff 64bit]
pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: >[8086:283f] type 01 class 0x060400
pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: >[8086:2841] type 01 class 0x060400
pci 0000:00:1c.1: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: >[8086:2843] type 01 class 0x060400
pci 0000:00:1c.2: >PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: >[8086:2830] type 00 class 0x0c0300
pci 0000:00:1d.0: >reg 20: [io 0x1840-0x185f]
pci 0000:00:1d.1: >[8086:2831] type 00 class 0x0c0300
pci 0000:00:1d.1: >reg 20: [io 0x1860-0x187f]
pci 0000:00:1d.2: >[8086:2832] type 00 class 0x0c0300
pci 0000:00:1d.2: >reg 20: [io 0x1880-0x189f]
pci 0000:00:1d.7: >[8086:2836] type 00 class 0x0c0320
pci 0000:00:1d.7: >reg 10: [mem 0xfc304400-0xfc3047ff]
pci 0000:00:1d.7: >PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: >[8086:2448] type 01 class 0x060401
pci 0000:00:1f.0: >[8086:2815] type 00 class 0x060100
pci 0000:00:1f.0: >quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: >quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: >ICH7 LPC Generic IO decode 2 PIO at 0068 (mask 0007)
pci 0000:00:1f.1: >[8086:2850] type 00 class 0x01018a
pci 0000:00:1f.1: >reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.1: >reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.1: >reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.1: >reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: >reg 20: [io 0x18a0-0x18af]
pci 0000:00:1f.2: >[8086:2828] type 00 class 0x01018f
pci 0000:00:1f.2: >reg 10: [io 0x18f8-0x18ff]
pci 0000:00:1f.2: >reg 14: [io 0x18cc-0x18cf]
pci 0000:00:1f.2: >reg 18: [io 0x18f0-0x18f7]
pci 0000:00:1f.2: >reg 1c: [io 0x18c8-0x18cb]
pci 0000:00:1f.2: >reg 20: [io 0x18e0-0x18ef]
pci 0000:00:1f.2: >reg 24: [io 0x18d0-0x18df]
pci 0000:00:1f.2: >PME# supported from D3hot
pci 0000:00:1f.3: >[8086:283e] type 00 class 0x0c0500
pci 0000:00:1f.3: >reg 10: [mem 0x00000000-0x000000ff]
pci 0000:00:1f.3: >reg 20: [io 0x1c00-0x1c1f]
pci 0000:01:00.0: >[1002:94c8] type 00 class 0x030000
pci 0000:01:00.0: >reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: >reg 18: [mem 0xcfef0000-0xcfefffff 64bit]
pci 0000:01:00.0: >reg 20: [io 0x2000-0x20ff]
pci 0000:01:00.0: >reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: >supports D1 D2
pci 0000:00:01.0: >PCI bridge to [bus 01-01]
pci 0000:00:01.0: > bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: > bridge window [mem 0xcfe00000-0xcfefffff]
pci 0000:00:01.0: > bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: >[14e4:1693] type 00 class 0x020000
pci 0000:02:00.0: >reg 10: [mem 0xf6000000-0xf600ffff 64bit]
pci 0000:02:00.0: >PME# supported from D3hot D3cold
pci 0000:00:1c.0: >PCI bridge to [bus 02-03]
pci 0000:00:1c.0: > bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: > bridge window [mem 0xf6000000-0xf7ffffff]
pci 0000:00:1c.0: > bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:04:00.0: >[8086:4222] type 00 class 0x028000
pci 0000:04:00.0: >reg 10: [mem 0xf8000000-0xf8000fff]
pci 0000:04:00.0: >PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: >disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: >PCI bridge to [bus 04-05]
pci 0000:00:1c.1: > bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: > bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1c.1: > bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
pci 0000:00:1c.2: >PCI bridge to [bus 06-07]
pci 0000:00:1c.2: > bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.2: > bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:00:1c.2: > bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
pci 0000:0f:06.0: >[104c:8039] type 02 class 0x060700
pci 0000:0f:06.0: >reg 10: [mem 0xfc004000-0xfc004fff]
pci 0000:0f:06.0: >supports D1 D2
pci 0000:0f:06.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0f:06.1: >[104c:803a] type 00 class 0x0c0010
pci 0000:0f:06.1: >reg 10: [mem 0xfc006000-0xfc0067ff]
pci 0000:0f:06.1: >reg 14: [mem 0xfc000000-0xfc003fff]
pci 0000:0f:06.1: >supports D1 D2
pci 0000:0f:06.1: >PME# supported from D0 D1 D2 D3hot
pci 0000:0f:06.2: >[104c:803b] type 00 class 0x018000
pci 0000:0f:06.2: >reg 10: [mem 0xfc005000-0xfc005fff]
pci 0000:0f:06.2: >supports D1 D2
pci 0000:0f:06.2: >PME# supported from D0 D1 D2 D3hot
pci 0000:0f:06.3: >[104c:803c] type 00 class 0x080500
pci 0000:0f:06.3: >reg 10: [mem 0xfc006800-0xfc0068ff]
pci 0000:0f:06.3: >supports D1 D2
pci 0000:0f:06.3: >PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: >PCI bridge to [bus 0f-10] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0xfc000000-0xfc0fffff]
pci 0000:00:1e.0: > bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: > bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
pci_bus 0000:10: >[bus 10-13] partially hidden behind transparent bridge 0000:0f [bus 0f-10]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
pci0000:00: >Requesting ACPI _OSC control (0x1d)
pci0000:00: >ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbfed0000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-ff]
pnp 00:00: >[io 0x0000-0x0cf7 window]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000c0000-0x000c3fff window]
pnp 00:00: >[mem 0x000c4000-0x000c7fff window]
pnp 00:00: >[mem 0x000c8000-0x000cbfff window]
pnp 00:00: >[mem 0x000cc000-0x000cffff window]
pnp 00:00: >[mem 0x000d0000-0x000d3fff window]
pnp 00:00: >[mem 0x000d4000-0x000d7fff window]
pnp 00:00: >[mem 0x000d8000-0x000dbfff window]
pnp 00:00: >[mem 0x000dc000-0x000dffff window]
pnp 00:00: >[mem 0x000e0000-0x000e3fff window]
pnp 00:00: >[mem 0x000e4000-0x000e7fff window]
pnp 00:00: >[mem 0x000e8000-0x000ebfff window]
pnp 00:00: >[mem 0x000ec000-0x000effff window]
pnp 00:00: >[mem 0x000f0000-0x000fffff window]
pnp 00:00: >[mem 0xc0000000-0xdfffffff window]
pnp 00:00: >[mem 0xf0000000-0xfebfffff window]
pnp 00:00: >[mem 0xfed40000-0xfed44fff window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: >[mem 0xfed1c000-0xfed1ffff]
pnp 00:01: >[mem 0xfed14000-0xfed17fff]
pnp 00:01: >[mem 0xfed18000-0xfed18fff]
pnp 00:01: >[mem 0xfed19000-0xfed19fff]
pnp 00:01: >[mem 0xe0000000-0xefffffff]
pnp 00:01: >[mem 0xfed20000-0xfed3ffff]
pnp 00:01: >[mem 0xfed45000-0xfed8ffff]
system 00:01: >[mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: >[mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: >[mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: >[mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: >[mem 0xe0000000-0xefffffff] has been reserved
system 00:01: >[mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: >[mem 0xfed45000-0xfed8ffff] has been reserved
system 00:01: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: >[io 0x0060]
pnp 00:02: >[io 0x0064]
pnp 00:02: >[irq 1]
pnp 00:02: >Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: >[irq 12]
pnp 00:03: >Plug and Play ACPI device, IDs SYN0302 SYN0300 SYN0002 PNP0f13 (active)
pnp 00:04: >[io 0x0000-0x001f]
pnp 00:04: >[io 0x0081-0x0091]
pnp 00:04: >[io 0x0093-0x009f]
pnp 00:04: >[io 0x00c0-0x00df]
pnp 00:04: >[dma 4]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: >[mem 0xff000000-0xffffffff]
pnp 00:05: >Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:06: >[mem 0xfed00000-0xfed003ff]
system 00:06: >[mem 0xfed00000-0xfed003ff] has been reserved
system 00:06: >Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp 00:07: >[io 0x00f0]
pnp 00:07: >[irq 13]
pnp 00:07: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: >[io 0x002e-0x002f]
pnp 00:08: >[io 0x004e-0x004f]
pnp 00:08: >[io 0x0061]
pnp 00:08: >[io 0x0063]
pnp 00:08: >[io 0x0065]
pnp 00:08: >[io 0x0067]
pnp 00:08: >[io 0x0080]
pnp 00:08: >[io 0x0092]
pnp 00:08: >[io 0x00b2-0x00b3]
pnp 00:08: >[io 0x0068-0x006f]
pnp 00:08: >[io 0x0800-0x080f]
pnp 00:08: >[io 0x1000-0x107f]
pnp 00:08: >[io 0x1180-0x11bf]
pnp 00:08: >[io 0xfe00]
pnp 00:08: >[mem 0xff800000-0xff800fff]
system 00:08: >[io 0x0800-0x080f] has been reserved
system 00:08: >[io 0x1000-0x107f] has been reserved
system 00:08: >[io 0x1180-0x11bf] has been reserved
system 00:08: >[io 0xfe00] has been reserved
system 00:08: >[mem 0xff800000-0xff800fff] has been reserved
system 00:08: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: >[io 0x0070-0x0077]
pnp 00:09: >[irq 8]
pnp 00:09: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:0a: >Plug and Play ACPI device, IDs NSC6001 (disabled)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:0f:06.0: >res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:0f:06.0: >res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:00:1e.0: >bridge window [io 0x1000-0x0fff] to [bus 0f-10] add_size 1000
pci 0000:0f:06.0: >res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:00:1e.0: >bridge window [mem 0x04000000-0x03ffffff pref] to [bus 0f-10] add_size 4000000
pci 0000:00:1e.0: >res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:00:1e.0: >res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1e.0: >BAR 15: assigned [mem 0xc0000000-0xc3ffffff pref]
pci 0000:00:1e.0: >BAR 13: assigned [io 0x6000-0x6fff]
pci 0000:00:1f.3: >BAR 0: assigned [mem 0xc4000000-0xc40000ff]
pci 0000:01:00.0: >BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
pci 0000:00:01.0: >PCI bridge to [bus 01-01]
pci 0000:00:01.0: > bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: > bridge window [mem 0xcfe00000-0xcfefffff]
pci 0000:00:01.0: > bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: >PCI bridge to [bus 02-03]
pci 0000:00:1c.0: > bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: > bridge window [mem 0xf6000000-0xf7ffffff]
pci 0000:00:1c.0: > bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.1: >PCI bridge to [bus 04-05]
pci 0000:00:1c.1: > bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: > bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1c.1: > bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
pci 0000:00:1c.2: >PCI bridge to [bus 06-07]
pci 0000:00:1c.2: > bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.2: > bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:00:1c.2: > bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
pci 0000:0f:06.0: >res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:0f:06.0: >res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
pci 0000:0f:06.0: >res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:0f:06.0: >res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:0f:06.0: >BAR 15: assigned [mem 0xc0000000-0xc3ffffff pref]
pci 0000:0f:06.0: >BAR 16: assigned [mem 0xc8000000-0xcbffffff]
pci 0000:0f:06.0: >BAR 13: assigned [io 0x6000-0x60ff]
pci 0000:0f:06.0: >BAR 14: assigned [io 0x6400-0x64ff]
pci 0000:0f:06.0: >CardBus bridge to [bus 10-13]
pci 0000:0f:06.0: > bridge window [io 0x6000-0x60ff]
pci 0000:0f:06.0: > bridge window [io 0x6400-0x64ff]
pci 0000:0f:06.0: > bridge window [mem 0xc0000000-0xc3ffffff pref]
pci 0000:0f:06.0: > bridge window [mem 0xc8000000-0xcbffffff]
pci 0000:00:1e.0: >PCI bridge to [bus 0f-10]
pci 0000:00:1e.0: > bridge window [io 0x6000-0x6fff]
pci 0000:00:1e.0: > bridge window [mem 0xfc000000-0xfc0fffff]
pci 0000:00:1e.0: > bridge window [mem 0xc0000000-0xc3ffffff pref]
pci 0000:00:1e.0: >setting latency timer to 64
pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: >resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: >resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: >resource 10 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: >resource 11 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: >resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: >resource 1 [mem 0xcfe00000-0xcfefffff]
pci_bus 0000:01: >resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: >resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: >resource 1 [mem 0xf6000000-0xf7ffffff]
pci_bus 0000:02: >resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
pci_bus 0000:04: >resource 0 [io 0x4000-0x4fff]
pci_bus 0000:04: >resource 1 [mem 0xf8000000-0xf9ffffff]
pci_bus 0000:04: >resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
pci_bus 0000:06: >resource 0 [io 0x5000-0x5fff]
pci_bus 0000:06: >resource 1 [mem 0xfa000000-0xfbffffff]
pci_bus 0000:06: >resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref]
pci_bus 0000:0f: >resource 0 [io 0x6000-0x6fff]
pci_bus 0000:0f: >resource 1 [mem 0xfc000000-0xfc0fffff]
pci_bus 0000:0f: >resource 2 [mem 0xc0000000-0xc3ffffff pref]
pci_bus 0000:0f: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0f: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0f: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0f: >resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:0f: >resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:0f: >resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:0f: >resource 10 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:0f: >resource 11 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:10: >resource 0 [io 0x6000-0x60ff]
pci_bus 0000:10: >resource 1 [io 0x6400-0x64ff]
pci_bus 0000:10: >resource 2 [mem 0xc0000000-0xc3ffffff pref]
pci_bus 0000:10: >resource 3 [mem 0xc8000000-0xcbffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: >Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbbeca000-0xbfec9fff] (64MB) mapped at [ffff8800bbeca000-ffff8800bfec9fff]
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1366127073.376:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 7900
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: >irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: >irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: >irq 42 for MSI/MSI-X
pcieport 0000:00:1c.2: >irq 43 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: >registered as thermal_zone0
ACPI: Thermal Zone [TZS0] (18 C)
thermal LNXTHERM:01: >registered as thermal_zone1
ACPI: Thermal Zone [TZS1] (28 C)
ACPI: Battery Slot [BAT0] (battery absent)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT0] (battery absent)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: >version 2.13
ata_piix 0000:00:1f.1: >setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
ata_piix 0000:00:1f.2: >MAP [
P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: >setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x18f8 ctl 0x18cc bmdma 0x18e0 irq 19
ata4: SATA max UDMA/133 cmd 0x18f0 ctl 0x18c8 bmdma 0x18e8 irq 19
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: >setting latency timer to 64
ehci_hcd 0000:00:1a.7: >EHCI Host Controller
ehci_hcd 0000:00:1a.7: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: >debug port 1
ehci_hcd 0000:00:1a.7: >cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: >irq 20, io mem 0xfc304000
ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WP03, max UDMA/33
ehci_hcd 0000:00:1a.7: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb1: >SerialNumber: 0000:00:1a.7
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >4 ports detected
ehci_hcd 0000:00:1d.7: >setting latency timer to 64
ehci_hcd 0000:00:1d.7: >EHCI Host Controller
ehci_hcd 0000:00:1d.7: >new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: >debug port 1
ehci_hcd 0000:00:1d.7: >cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: >irq 23, io mem 0xfc304400
ata1.00: configured for UDMA/33
scsi 0:0:0:0: >CD-ROM HL-DT-ST DVDRAM GSA-T20N WP03 PQ: 0 ANSI: 5
ehci_hcd 0000:00:1d.7: >USB 2.0 started, EHCI 1.00
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: EHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb2: >SerialNumber: 0000:00:1d.7
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: >setting latency timer to 64
uhci_hcd 0000:00:1a.0: >UHCI Host Controller
uhci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: >irq 20, io base 0x00001800
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: UHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb3: >SerialNumber: 0000:00:1a.0
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >2 ports detected
uhci_hcd 0000:00:1a.1: >setting latency timer to 64
uhci_hcd 0000:00:1a.1: >UHCI Host Controller
uhci_hcd 0000:00:1a.1: >new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: >irq 21, io base 0x00001820
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: UHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb4: >SerialNumber: 0000:00:1a.1
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >2 ports detected
uhci_hcd 0000:00:1d.0: >setting latency timer to 64
uhci_hcd 0000:00:1d.0: >UHCI Host Controller
uhci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: >irq 23, io base 0x00001840
usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: >Product: UHCI Host Controller
usb usb5: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb5: >SerialNumber: 0000:00:1d.0
hub 5-0:1.0: >USB hub found
hub 5-0:1.0: >2 ports detected
uhci_hcd 0000:00:1d.1: >setting latency timer to 64
uhci_hcd 0000:00:1d.1: >UHCI Host Controller
uhci_hcd 0000:00:1d.1: >new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: >irq 17, io base 0x00001860
usb usb6: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: >Product: UHCI Host Controller
usb usb6: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb6: >SerialNumber: 0000:00:1d.1
hub 6-0:1.0: >USB hub found
hub 6-0:1.0: >2 ports detected
uhci_hcd 0000:00:1d.2: >setting latency timer to 64
uhci_hcd 0000:00:1d.2: >UHCI Host Controller
uhci_hcd 0000:00:1d.2: >new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: >irq 18, io base 0x00001880
usb usb7: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: >Product: UHCI Host Controller
usb usb7: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb7: >SerialNumber: 0000:00:1d.2
hub 7-0:1.0: >USB hub found
hub 7-0:1.0: >2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: >Attached scsi CD-ROM sr0
sr 0:0:0:0: >Attached scsi generic sg0 type 5
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:09: >RTC can wake from S4
rtc_cmos 00:09: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 9:464:740
rtc_cmos 00:09: >setting system clock to 2013-04-16 15:44:35 UTC (1366127075)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
usb 1-1: >new high-speed USB device number 2 using ehci_hcd
usb 1-1: >New USB device found, idVendor=064e, idProduct=a101
usb 1-1: >New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-1: >Product: Acer CrystalEye webcam
usb 1-1: >Manufacturer: SuYin
usb 1-1: >SerialNumber: CN0314-OV03-VA-R02.00.00
ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.01: SATA link down (SStatus 0 SControl 300)
ata3.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: >Direct-Access ATA WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5
sd 2:0:0:0: >[sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 2:0:0:0: >Attached scsi generic sg1 type 0
sd 2:0:0:0: >[sda] Write Protect is off
sd 2:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
sd 2:0:0:0: >[sda] Attached SCSI disk
ata4.01: failed to resume link (SControl 0)
ata4.00: SATA link down (SStatus 0 SControl 300)
ata4.01: SATA link down (SStatus 0 SControl 0)
Freeing unused kernel memory: 928k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1472k freed
Freeing unused kernel memory: 1124k freed
udevd[98]: starting version 175
tg3.c:v3.123 (March 21, 2012)
tg3 0000:02:00.0: >eth0: Tigon3 [partno(BCM95787m) rev b002] (PCI Express) MAC address 00:1d:72:20:a1:e4
tg3 0000:02:00.0: >eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:02:00.0: >eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:02:00.0: >eth0: dma_rwctrl[76180000] dma_mask[64-bit]
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:0f:06.3: >SDHCI controller found [104c:803c] (rev 0)
mmc0: no vmmc regulator found
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:0f:06.3] using PIO
firewire_ohci 0000:0f:06.1: >added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
firewire_core 0000:0f:06.1: created device fw0: GUID 001d72ffff20a1e4, S400
EXT4-fs (sda9): INFO: recovery required on readonly filesystem
EXT4-fs (sda9): write access will be enabled during recovery
EXT4-fs (sda9): recovery complete
EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
Adding 4198396k swap on /dev/sda5. Priority:-1 extents:1 across:4198396k
Adding 1833980k swap on /dev/sda8. Priority:-2 extents:1 across:1833980k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[351]: starting version 175
ACPI Warning: 0x0000000000001060-0x000000000000107f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001180-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
lp: driver loaded but no devices found
[drm] Initialized drm 1.1.0 20060810
cfg80211: Calling CRDA to update world regulatory domain
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
Linux video capture interface: v2.00
yenta_cardbus 0000:0f:06.0: >CardBus bridge found [1025:011f]
yenta_cardbus 0000:0f:06.0: >Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:0f:06.0: >Routing CardBus interrupts to PCI
yenta_cardbus 0000:0f:06.0: >TI: mfunc 0x01aa1b22, devctl 0x64
wmi: Mapper loaded
[drm] initializing kernel modesetting (RV610 0x1002:0x94C8 0x1025:0x011F).
[drm] register mmio base: 0xCFEF0000
[drm] register mmio size: 65536
ATOM BIOS: Wistron/Acer
radeon 0000:01:00.0: >VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
radeon 0000:01:00.0: >GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 2024246 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: >irq 44 for MSI/MSI-X
radeon 0000:01:00.0: >radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RV610 Microcode
uvcvideo: Found UVC 1.00 device Acer CrystalEye webcam (064e:a101)
acpi device:04: >registered as cooling_device2
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input4
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
iwl3945: Copyright(c) 2003-2011 Intel Corporation
input: Acer CrystalEye webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input5
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
iwl3945 0000:04:00.0: >Tunable channels: 13 802.11bg, 23 802.11a channels
iwl3945 0000:04:00.0: >Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:04:00.0: >irq 45 for MSI/MSI-X
Registered led device: phy0-led
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
irda_init()
NET: Registered protocol family 23
nsc-ircc 00:0a: >[io 0x02f8-0x02ff]
nsc-ircc 00:0a: >[irq 3]
nsc-ircc 00:0a: >[dma 3]
microcode: CPU0 sig=0x10676, pf=0x80, revision=0x607
nsc-ircc 00:0a: >activated
nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3.
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
IrDA: Registered device irda0
nsc-ircc, Found dongle: Supports SIR Mode only
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x2f8
ieee80211 phy0: >Selected rate control algorithm 'iwl-3945-rs'
snd_hda_intel 0000:00:1b.0: >irq 46 for MSI/MSI-X
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
yenta_cardbus 0000:0f:06.0: >ISA IRQ mask 0x0cf0, PCI irq 22
yenta_cardbus 0000:0f:06.0: >Socket status: 30000006
pci_bus 0000:0f: >Raising subordinate bus# of parent bus (#0f) from #10 to #13
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
yenta_cardbus 0000:0f:06.0: >pcmcia: parent PCI bridge window: [io 0x6000-0x6fff]
yenta_cardbus 0000:0f:06.0: >pcmcia: parent PCI bridge window: [mem 0xfc000000-0xfc0fffff]
pcmcia_socket pcmcia_socket0: >cs: memory probe 0xfc000000-0xfc0fffff:
excluding 0xfc000000-0xfc00ffff
yenta_cardbus 0000:0f:06.0: >pcmcia: parent PCI bridge window: [mem 0xc0000000-0xc3ffffff pref]
pcmcia_socket pcmcia_socket0: >cs: memory probe 0xc0000000-0xc3ffffff:
excluding 0xc0000000-0xc3ffffff
acer_wmi: Acer Laptop ACPI-WMI Extras
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
acer_wmi: Function bitmap for Communication Device: 0x17
acer_wmi: Brightness must be controlled by acpi video driver
input: Acer BMA150 accelerometer as /devices/virtual/input/input9
microcode: CPU1 sig=0x10676, pf=0x80, revision=0x607
microcode: Microcode Update Driver: v2.00 , Peter Oruba
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: >WB enabled
radeon 0000:01:00.0: >fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0xffff88011f8eec00
[drm] ring test on 0 succeeded in 0 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] LVDS-1
[drm] DDC: 0xac0 0xac0 0xac4 0xac4 0xac8 0xac8 0xacc 0xacc
[drm] Encoders:
[drm] LCD1: INTERNAL_LVTM1
[drm] Connector 1:
[drm] DIN-1
[drm] Encoders:
[drm] TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm] VGA-1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 3:
[drm] DVI-I-1
[drm] HPD1
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP1: INTERNAL_KLDSCP_TMDS1
[drm] Internal thermal controller without fan control
[drm] radeon: power management initialized
EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro
pcmcia_socket pcmcia_socket0: >cs: memory probe 0x0c0000-0x0fffff:
excluding 0xc0000-0xd3fff 0xe0000-0xfffff
pcmcia_socket pcmcia_socket0: >cs: memory probe 0xa0000000-0xa0ffffff:
excluding 0xa0000000-0xa0ffffff
pcmcia_socket pcmcia_socket0: >cs: memory probe 0x60000000-0x60ffffff:
excluding 0x60000000-0x60ffffff
[drm] fb mappable at 0xD0142000
[drm] vram apper at 0xD0000000
[drm] size 4096000
[drm] fb depth is 24
[drm] pitch is 5120
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x50
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.18.0 20080528 for 0000:01:00.0 on minor 0
psmouse serio2: >synaptics: Touchpad model: 1, fw: 6.3, id: 0x12a0b1, caps: 0xa04713/0x204000/0x0
init: failsafe main process (691) killed by TERM signal
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
usb 7-2: >new full-speed USB device number 2 using uhci_hcd
usb 7-2: >New USB device found, idVendor=0a5c, idProduct=2101
usb 7-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: >Product: Acer Module
usb 7-2: >Manufacturer: Broadcom Corp
tg3 0000:02:00.0: >irq 47 for MSI/MSI-X
usbcore: registered new interface driver btusb
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
iwl3945 0000:04:00.0: >loaded firmware version 15.32.2.9
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
tg3 0000:02:00.0: >eth0: Link is up at 100 Mbps, full duplex
tg3 0000:02:00.0: >eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: plymouth-stop pre-start process (1399) terminated with status 1