dmesg - batt_test
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000c6e78fff] usable
BIOS-e820: [mem 0x00000000c6e79000-0x00000000c7288fff] reserved
BIOS-e820: [mem 0x00000000c7289000-0x00000000c7308fff] ACPI NVS
BIOS-e820: [mem 0x00000000c7309000-0x00000000c7368fff] ACPI data
BIOS-e820: [mem 0x00000000c7369000-0x00000000c7d7ffff] usable
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.00 by Phoenix Technologies Ltd.
efi: ACPI=0xc7368000 ACPI 2.0=0xc7368014 SMBIOS=0xc727b000
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x0000000000054000) (0MB)
efi: mem02: type=4, attr=0xf, range=[0x0000000000054000-0x0000000000055000) (0MB)
efi: mem03: type=3, attr=0xf, range=[0x0000000000055000-0x000000000008f000) (0MB)
efi: mem04: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
efi: mem05: type=3, attr=0xf, range=[0x0000000000090000-0x00000000000a0000) (0MB)
efi: mem06: type=7, attr=0xf, range=[0x0000000000100000-0x0000000000c00000) (11MB)
efi: mem07: type=3, attr=0xf, range=[0x0000000000c00000-0x0000000001000000) (4MB)
efi: mem08: type=2, attr=0xf, range=[0x0000000001000000-0x000000000234f000) (19MB)
efi: mem09: type=7, attr=0xf, range=[0x000000000234f000-0x00000000362d8000) (831MB)
efi: mem10: type=2, attr=0xf, range=[0x00000000362d8000-0x0000000037164000) (14MB)
efi: mem11: type=7, attr=0xf, range=[0x0000000037164000-0x00000000929b0000) (1464MB)
efi: mem12: type=2, attr=0xf, range=[0x00000000929b0000-0x00000000c3d36000) (787MB)
efi: mem13: type=4, attr=0xf, range=[0x00000000c3d36000-0x00000000c3d56000) (0MB)
efi: mem14: type=7, attr=0xf, range=[0x00000000c3d56000-0x00000000c4d46000) (15MB)
efi: mem15: type=1, attr=0xf, range=[0x00000000c4d46000-0x00000000c4d64000) (0MB)
efi: mem16: type=4, attr=0xf, range=[0x00000000c4d64000-0x00000000c4d65000) (0MB)
efi: mem17: type=7, attr=0xf, range=[0x00000000c4d65000-0x00000000c4d7e000) (0MB)
efi: mem18: type=4, attr=0xf, range=[0x00000000c4d7e000-0x00000000c664a000) (24MB)
efi: mem19: type=7, attr=0xf, range=[0x00000000c664a000-0x00000000c6c22000) (5MB)
efi: mem20: type=2, attr=0xf, range=[0x00000000c6c22000-0x00000000c6c2c000) (0MB)
efi: mem21: type=3, attr=0xf, range=[0x00000000c6c2c000-0x00000000c6e79000) (2MB)
efi: mem22: type=5, attr=0x800000000000000f, range=[0x00000000c6e79000-0x00000000c6ed3000) (0MB)
efi: mem23: type=5, attr=0x800000000000000f, range=[0x00000000c6ed3000-0x00000000c6f79000) (0MB)
efi: mem24: type=6, attr=0x800000000000000f, range=[0x00000000c6f79000-0x00000000c71d4000) (2MB)
efi: mem25: type=6, attr=0x800000000000000f, range=[0x00000000c71d4000-0x00000000c71d7000) (0MB)
efi: mem26: type=0, attr=0xf, range=[0x00000000c71d7000-0x00000000c723f000) (0MB)
efi: mem27: type=6, attr=0x800000000000000f, range=[0x00000000c723f000-0x00000000c7248000) (0MB)
efi: mem28: type=0, attr=0xf, range=[0x00000000c7248000-0x00000000c724c000) (0MB)
efi: mem29: type=6, attr=0x800000000000000f, range=[0x00000000c724c000-0x00000000c7279000) (0MB)
efi: mem30: type=0, attr=0xf, range=[0x00000000c7279000-0x00000000c727b000) (0MB)
efi: mem31: type=0, attr=0xf, range=[0x00000000c727b000-0x00000000c7289000) (0MB)
efi: mem32: type=10, attr=0xf, range=[0x00000000c7289000-0x00000000c72bf000) (0MB)
efi: mem33: type=10, attr=0xf, range=[0x00000000c72bf000-0x00000000c7309000) (0MB)
efi: mem34: type=9, attr=0xf, range=[0x00000000c7309000-0x00000000c734d000) (0MB)
efi: mem35: type=9, attr=0xf, range=[0x00000000c734d000-0x00000000c7369000) (0MB)
efi: mem36: type=4, attr=0xf, range=[0x00000000c7369000-0x00000000c7d80000) (10MB)
efi: mem37: type=7, attr=0xf, range=[0x0000000100000000-0x000000011f000000) (496MB)
efi: mem38: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed81000) (0MB)
DMI 2.6 present.
DMI: LENOVO 0596CTO/0596CTO, BIOS 8FET33WW (1.17 ) 11/07/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0C0000000 mask FF8000000 write-back
3 base 0FFF90000 mask FFFFF0000 uncachable
4 base 0FED80000 mask FFFFFF000 uncachable
5 disabled
6 disabled
7 base 0FFE00000 mask FFFE00000 write-protect
TOM2: 000000011f000000 aka 4592M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xc7d80 max_arch_pfn = 0x400000000
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xc7d7ffff]
[mem 0x00000000-0xbfffffff] page 1G
[mem 0xc0000000-0xc7bfffff] page 2M
[mem 0xc7c00000-0xc7d7ffff] page 4k
kernel direct mapping tables up to 0xc7d7ffff @ [mem 0x1fffd000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x11effffff]
[mem 0x100000000-0x11effffff] page 2M
kernel direct mapping tables up to 0x11effffff @ [mem 0xc6c2a000-0xc6c2bfff]
RAMDISK: [mem 0x362d8000-0x37163fff]
ACPI: RSDP 00000000c7368014 00024 (v02 LENOVO)
ACPI: XSDT 00000000c7368120 00074 (v01 LENOVO TP-8F 00000003 PTEC 00000002)
ACPI: FACP 00000000c7356000 000F4 (v04 LENOVO TP-8F 00001170 PTL 00000002)
ACPI: DSDT 00000000c7358000 0EBDC (v01 LENOVO TP-8F 00001000 PTEC 00001170)
ACPI: FACS 00000000c72f4000 00040
ACPI: SLIC 00000000c7367000 00176 (v01 LENOVO TP-8F 00001170 PTEC 00000001)
ACPI: HPET 00000000c7355000 00038 (v01 LENOVO TP-8F 00001170 PTL 00000002)
ACPI: APIC 00000000c7354000 0005E (v02 LENOVO TP-8F 00001170 PTL 00000002)
ACPI: MCFG 00000000c7353000 0003C (v01 LENOVO TP-8F 00001170 PTL 00000002)
ACPI: UEFI 00000000c7352000 0003E (v01 LENOVO TP-8F 00001170 PTL 00000002)
ACPI: UEFI 00000000c7351000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
ACPI: SSDT 00000000c7350000 003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: SSDT 00000000c734e000 012FA (v02 AMD ALIB 00000001 MSFT 04000000)
ACPI: UEFI 00000000c734d000 0012A (v01 LENOVO TP-8F 00001170 PTL 00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011effffff]
Initmem setup node 0 [mem 0x00000000-0x11effffff]
NODE_DATA [mem 0x11effc000-0x11effffff]
[ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ac00000-ffff88011e5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x11effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0008efff]
node 0: [mem 0x00090000-0x0009ffff]
node 0: [mem 0x00100000-0xc6e78fff]
node 0: [mem 0xc7369000-0xc7d7ffff]
node 0: [mem 0x100000000-0x11effffff]
On node 0 totalpages: 944159
DMA zone: 64 pages used for memmap
DMA zone: 69 pages reserved
DMA zone: 3850 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 796880 pages, LIFO batch:31
Normal zone: 1984 pages used for memmap
Normal zone: 124992 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000008f000 - 0000000000090000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 00000000c6e79000 - 00000000c7289000
PM: Registered nosave memory: 00000000c7289000 - 00000000c7309000
PM: Registered nosave memory: 00000000c7309000 - 00000000c7369000
PM: Registered nosave memory: 00000000c7d80000 - 00000000fed80000
PM: Registered nosave memory: 00000000fed80000 - 00000000fed81000
PM: Registered nosave memory: 00000000fed81000 - 0000000100000000
e820: [mem 0xc7d80000-0xfed7ffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88011ec00000 s83584 r8192 d22912 u1048576
pcpu-alloc: s83584 r8192 d22912 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 925722
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3581760k/4702208k available (6711k kernel code, 925572k absent, 194876k reserved, 6459k data, 928k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:512 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 15204352 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1596.580 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.16 BogoMIPS (lpj=6386320)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 00c7d80000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
ACPI: Core revision 20120320
ftrace: allocating 25118 entries in 99 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD E-350 Processor stepping 00
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 Ok.
Brought up 2 CPUs
Total of 2 processors activated (6386.32 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xc7289000-0xc7308fff] (524288 bytes)
dummy:
RTC time: 20:13:16, date: 04/09/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf8000000-0xf9ffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf8000000-0xf9ffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xf9ffffff] reserved in ACPI motherboard resources
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000c0000-0x000c1fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000c2000-0x000c3fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000c4000-0x000c5fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000c6000-0x000c7fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000c8000-0x000c9fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000ca000-0x000cbfff]
pci_root PNP0A08:00: >host bridge window [mem 0x000cc000-0x000cdfff]
pci_root PNP0A08:00: >host bridge window [mem 0x000ce000-0x000cffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d0000-0x000d1fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d2000-0x000d3fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d4000-0x000d5fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d6000-0x000d7fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d8000-0x000d9fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000da000-0x000dbfff]
pci_root PNP0A08:00: >host bridge window [mem 0x000dc000-0x000ddfff]
pci_root PNP0A08:00: >host bridge window [mem 0x000de000-0x000dffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000e0000-0x000e1fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000e2000-0x000e3fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000e4000-0x000e5fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000e6000-0x000e7fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000e8000-0x000e9fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000ea000-0x000ebfff]
pci_root PNP0A08:00: >host bridge window [mem 0x000ec000-0x000edfff]
pci_root PNP0A08:00: >host bridge window [mem 0x000ee000-0x000effff]
pci_root PNP0A08:00: >host bridge window [mem 0xe0000000-0xf7ffffff]
pci_root PNP0A08:00: >host bridge window [mem 0xf8000000-0xffffffff]
pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: >ignoring host bridge window [mem 0x000ce000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce1ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >root bus resource [mem 0x000c0000-0x000c1fff]
pci_bus 0000:00: >root bus resource [mem 0x000c2000-0x000c3fff]
pci_bus 0000:00: >root bus resource [mem 0x000c4000-0x000c5fff]
pci_bus 0000:00: >root bus resource [mem 0x000c6000-0x000c7fff]
pci_bus 0000:00: >root bus resource [mem 0x000c8000-0x000c9fff]
pci_bus 0000:00: >root bus resource [mem 0x000ca000-0x000cbfff]
pci_bus 0000:00: >root bus resource [mem 0x000cc000-0x000cdfff]
pci_bus 0000:00: >root bus resource [mem 0x000d0000-0x000d1fff]
pci_bus 0000:00: >root bus resource [mem 0x000d2000-0x000d3fff]
pci_bus 0000:00: >root bus resource [mem 0x000d4000-0x000d5fff]
pci_bus 0000:00: >root bus resource [mem 0x000d6000-0x000d7fff]
pci_bus 0000:00: >root bus resource [mem 0x000d8000-0x000d9fff]
pci_bus 0000:00: >root bus resource [mem 0x000da000-0x000dbfff]
pci_bus 0000:00: >root bus resource [mem 0x000dc000-0x000ddfff]
pci_bus 0000:00: >root bus resource [mem 0x000de000-0x000dffff]
pci_bus 0000:00: >root bus resource [mem 0x000e0000-0x000e1fff]
pci_bus 0000:00: >root bus resource [mem 0x000e2000-0x000e3fff]
pci_bus 0000:00: >root bus resource [mem 0x000e4000-0x000e5fff]
pci_bus 0000:00: >root bus resource [mem 0x000e6000-0x000e7fff]
pci_bus 0000:00: >root bus resource [mem 0x000e8000-0x000e9fff]
pci_bus 0000:00: >root bus resource [mem 0x000ea000-0x000ebfff]
pci_bus 0000:00: >root bus resource [mem 0x000ec000-0x000edfff]
pci_bus 0000:00: >root bus resource [mem 0x000ee000-0x000effff]
pci_bus 0000:00: >root bus resource [mem 0xe0000000-0xf7ffffff]
pci_bus 0000:00: >root bus resource [mem 0xf8000000-0xffffffff]
pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
pci 0000:00:00.0: >[1022:1510] type 00 class 0x060000
pci 0000:00:01.0: >[1002:9802] type 00 class 0x030000
pci 0000:00:01.0: >reg 10: [mem 0xe0000000-0xefffffff pref]
pci 0000:00:01.0: >reg 14: [io 0x4000-0x40ff]
pci 0000:00:01.0: >reg 18: [mem 0xf0200000-0xf023ffff]
pci 0000:00:01.0: >supports D1 D2
pci 0000:00:01.1: >[1002:1314] type 00 class 0x040300
pci 0000:00:01.1: >reg 10: [mem 0xf0244000-0xf0247fff]
pci 0000:00:01.1: >supports D1 D2
pci 0000:00:06.0: >[1022:1514] type 01 class 0x060400
pci 0000:00:06.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: >[1002:4390] type 00 class 0x01018a
pci 0000:00:11.0: >reg 10: [io 0x4118-0x411f]
pci 0000:00:11.0: >reg 14: [io 0x4124-0x4127]
pci 0000:00:11.0: >reg 18: [io 0x4110-0x4117]
pci 0000:00:11.0: >reg 1c: [io 0x4120-0x4123]
pci 0000:00:11.0: >reg 20: [io 0x4100-0x410f]
pci 0000:00:11.0: >reg 24: [mem 0xf024a000-0xf024a3ff]
pci 0000:00:11.0: >set SATA to AHCI mode
pci 0000:00:12.0: >[1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: >reg 10: [mem 0xf0249000-0xf0249fff]
pci 0000:00:12.2: >[1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: >reg 10: [mem 0xf024a500-0xf024a5ff]
pci 0000:00:12.2: >supports D1 D2
pci 0000:00:12.2: >PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: >[1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: >reg 10: [mem 0xf0248000-0xf0248fff]
pci 0000:00:13.2: >[1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: >reg 10: [mem 0xf024a400-0xf024a4ff]
pci 0000:00:13.2: >supports D1 D2
pci 0000:00:13.2: >PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: >[1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: >[1002:4383] type 00 class 0x040300
pci 0000:00:14.2: >reg 10: [mem 0xf0240000-0xf0243fff 64bit]
pci 0000:00:14.2: >PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: >[1002:439d] type 00 class 0x060100
pci 0000:00:14.4: >[1002:4384] type 01 class 0x060401
pci 0000:00:15.0: >[1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: >supports D1 D2
pci 0000:00:15.1: >[1002:43a1] type 01 class 0x060400
pci 0000:00:15.1: >supports D1 D2
pci 0000:00:18.0: >[1022:1700] type 00 class 0x060000
pci 0000:00:18.1: >[1022:1701] type 00 class 0x060000
pci 0000:00:18.2: >[1022:1702] type 00 class 0x060000
pci 0000:00:18.3: >[1022:1703] type 00 class 0x060000
pci 0000:00:18.4: >[1022:1704] type 00 class 0x060000
pci 0000:00:18.5: >[1022:1718] type 00 class 0x060000
pci 0000:00:18.6: >[1022:1716] type 00 class 0x060000
pci 0000:00:18.7: >[1022:1719] type 00 class 0x060000
pci 0000:01:00.0: >[10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: >reg 10: [io 0x3000-0x30ff]
pci 0000:01:00.0: >reg 18: [mem 0xf0004000-0xf0004fff 64bit pref]
pci 0000:01:00.0: >reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:01:00.0: >reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: >supports D1 D2
pci 0000:01:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.0: >PCI bridge to [bus 01-01]
pci 0000:00:06.0: > bridge window [io 0x3000-0x3fff]
pci 0000:00:06.0: > bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:00:14.4: >PCI bridge to [bus 02-02] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000c0000-0x000c1fff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000c2000-0x000c3fff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000c4000-0x000c5fff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000c6000-0x000c7fff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000c8000-0x000c9fff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000ca000-0x000cbfff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000cc000-0x000cdfff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000d0000-0x000d1fff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000d2000-0x000d3fff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000d4000-0x000d5fff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000d6000-0x000d7fff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000d8000-0x000d9fff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000da000-0x000dbfff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000dc000-0x000ddfff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000de000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000e0000-0x000e1fff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000e2000-0x000e3fff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000e4000-0x000e5fff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000e6000-0x000e7fff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000e8000-0x000e9fff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000ea000-0x000ebfff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000ec000-0x000edfff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000ee000-0x000effff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0xf8000000-0xffffffff] (subtractive decode)
pci 0000:00:14.4: > bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: > bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:15.0: >PCI bridge to [bus 03-03]
pci 0000:04:00.0: >[10ec:8176] type 00 class 0x028000
pci 0000:04:00.0: >reg 10: [io 0x2000-0x20ff]
pci 0000:04:00.0: >reg 18: [mem 0xf0100000-0xf0103fff 64bit]
pci 0000:04:00.0: >supports D1 D2
pci 0000:04:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.1: >PCI bridge to [bus 04-04]
pci 0000:00:15.1: > bridge window [io 0x2000-0x2fff]
pci 0000:00:15.1: > bridge window [mem 0xf0100000-0xf01fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB1._PRT]
pci0000:00: >Requesting ACPI _OSC control (0x1d)
pci0000:00: >ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
e820: reserve RAM buffer [mem 0xc6e79000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc7d80000-0xc7ffffff]
e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-ff]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000c0000-0x000c1fff window]
pnp 00:00: >[mem 0x000c2000-0x000c3fff window]
pnp 00:00: >[mem 0x000c4000-0x000c5fff window]
pnp 00:00: >[mem 0x000c6000-0x000c7fff window]
pnp 00:00: >[mem 0x000c8000-0x000c9fff window]
pnp 00:00: >[mem 0x000ca000-0x000cbfff window]
pnp 00:00: >[mem 0x000cc000-0x000cdfff window]
pnp 00:00: >[mem 0x000ce000-0x000cffff window]
pnp 00:00: >[mem 0x000d0000-0x000d1fff window]
pnp 00:00: >[mem 0x000d2000-0x000d3fff window]
pnp 00:00: >[mem 0x000d4000-0x000d5fff window]
pnp 00:00: >[mem 0x000d6000-0x000d7fff window]
pnp 00:00: >[mem 0x000d8000-0x000d9fff window]
pnp 00:00: >[mem 0x000da000-0x000dbfff window]
pnp 00:00: >[mem 0x000dc000-0x000ddfff window]
pnp 00:00: >[mem 0x000de000-0x000dffff window]
pnp 00:00: >[mem 0x000e0000-0x000e1fff window]
pnp 00:00: >[mem 0x000e2000-0x000e3fff window]
pnp 00:00: >[mem 0x000e4000-0x000e5fff window]
pnp 00:00: >[mem 0x000e6000-0x000e7fff window]
pnp 00:00: >[mem 0x000e8000-0x000e9fff window]
pnp 00:00: >[mem 0x000ea000-0x000ebfff window]
pnp 00:00: >[mem 0x000ec000-0x000edfff window]
pnp 00:00: >[mem 0x000ee000-0x000effff window]
pnp 00:00: >[mem 0xe0000000-0xf7ffffff window]
pnp 00:00: >[mem 0xf8000000-0xffffffff window]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0000-0x0cf7 window]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: >[io 0x0f50-0x0f51]
pnp 00:01: >[mem 0xfec00000-0xfec00fff]
pnp 00:01: >[mem 0xfee00000-0xfee00fff]
pnp 00:01: >[mem 0xf8000000-0xf9ffffff]
system 00:01: >[io 0x0f50-0x0f51] has been reserved
system 00:01: >[mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: >[mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: >[mem 0xf8000000-0xf9ffffff] has been reserved
system 00:01: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: >[io 0x0000-0x001f]
pnp 00:02: >[io 0x0081-0x008f]
pnp 00:02: >[io 0x00c0-0x00de]
pnp 00:02: >[io 0x040b]
pnp 00:02: >[io 0x04d6]
pnp 00:02: >[dma 4]
pnp 00:02: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: >[io 0x00f0-0x00fe]
pnp 00:03: >[irq 13]
pnp 00:03: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: >[io 0x0070-0x0071]
pnp 00:04: >[irq 8]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: >[io 0x0061]
pnp 00:05: >Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: >[io 0x0060]
pnp 00:06: >[io 0x0064]
pnp 00:06: >[irq 1]
pnp 00:06: >Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: >[irq 12]
pnp 00:07: >Plug and Play ACPI device, IDs LEN0017 PNP0f13 (active)
pnp 00:08: >[io 0x0022-0x0023]
pnp 00:08: >[io 0x002e-0x002f]
pnp 00:08: >[io 0x0072-0x0073]
pnp 00:08: >[io 0x0080]
pnp 00:08: >[io 0x0092]
pnp 00:08: >[io 0x00b0-0x00b1]
pnp 00:08: >[io 0x00b2]
pnp 00:08: >[io 0x00b8]
pnp 00:08: >[io 0x00bc]
pnp 00:08: >[io 0x00f0]
pnp 00:08: >[io 0x04d0-0x04d1]
pnp 00:08: >[io 0x0530-0x0537]
pnp 00:08: >[io 0x0800-0x0827]
pnp 00:08: >[io 0x0830]
pnp 00:08: >[io 0x0840-0x0847]
pnp 00:08: >[io 0x0b00-0x0b1f]
pnp 00:08: >[io 0x0b20-0x0b3f]
pnp 00:08: >[io 0x0c00-0x0c01]
pnp 00:08: >[io 0x0c14]
pnp 00:08: >[io 0x0c50-0x0c52]
pnp 00:08: >[io 0x0cd0-0x0cd1]
pnp 00:08: >[io 0x0cd2-0x0cd3]
pnp 00:08: >[io 0x0cd4-0x0cd5]
pnp 00:08: >[io 0x0cd6-0x0cd7]
pnp 00:08: >[io 0x0cd8-0x0cdf]
pnp 00:08: >[io 0x0cf9]
pnp 00:08: >[io 0x8100-0x81ff window]
pnp 00:08: >[io 0x8200-0x82ff window]
system 00:08: >[io 0x04d0-0x04d1] has been reserved
system 00:08: >[io 0x0530-0x0537] has been reserved
system 00:08: >[io 0x0800-0x0827] has been reserved
system 00:08: >[io 0x0830] has been reserved
system 00:08: >[io 0x0840-0x0847] has been reserved
system 00:08: >[io 0x0b00-0x0b1f] has been reserved
system 00:08: >[io 0x0b20-0x0b3f] has been reserved
system 00:08: >[io 0x0c00-0x0c01] has been reserved
system 00:08: >[io 0x0c14] has been reserved
system 00:08: >[io 0x0c50-0x0c52] has been reserved
system 00:08: >[io 0x0cd0-0x0cd1] has been reserved
system 00:08: >[io 0x0cd2-0x0cd3] has been reserved
system 00:08: >[io 0x0cd4-0x0cd5] has been reserved
system 00:08: >[io 0x0cd6-0x0cd7] has been reserved
system 00:08: >[io 0x0cd8-0x0cdf] has been reserved
system 00:08: >[io 0x0cf9] could not be reserved
system 00:08: >[io 0x8100-0x81ff window] has been reserved
system 00:08: >[io 0x8200-0x82ff window] has been reserved
system 00:08: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: >[mem 0x000e0000-0x000fffff]
pnp 00:09: >[mem 0xffe00000-0xffffffff]
pnp 00:09: >[mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:09: >[mem 0xfec10000-0xfec1001f]
pnp 00:09: >[mem 0xfed00000-0xfed003ff]
pnp 00:09: >[mem 0xfed61000-0xfed613ff]
pnp 00:09: >[mem 0xfed80000-0xfed80fff]
pnp 00:09: >[Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xf8000000-0xf9ffffff]; adding more reservations
system 00:09: >[mem 0x000e0000-0x000fffff] could not be reserved
system 00:09: >[mem 0xffe00000-0xffffffff] has been reserved
system 00:09: >[mem 0xfec10000-0xfec1001f] has been reserved
system 00:09: >[mem 0xfed00000-0xfed003ff] has been reserved
system 00:09: >[mem 0xfed61000-0xfed613ff] has been reserved
system 00:09: >[mem 0xfed80000-0xfed80fff] has been reserved
system 00:09: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:01:00.0: >no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:00:15.1: >bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-04] add_size 200000
pci 0000:00:15.1: >res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:06.0: >BAR 14: assigned [mem 0xf0300000-0xf03fffff]
pci 0000:00:15.1: >BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:01:00.0: >BAR 6: assigned [mem 0xf0020000-0xf003ffff pref]
pci 0000:00:06.0: >PCI bridge to [bus 01-01]
pci 0000:00:06.0: > bridge window [io 0x3000-0x3fff]
pci 0000:00:06.0: > bridge window [mem 0xf0300000-0xf03fffff]
pci 0000:00:06.0: > bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:00:14.4: >PCI bridge to [bus 02-02]
pci 0000:00:15.0: >PCI bridge to [bus 03-03]
pci 0000:00:15.1: >PCI bridge to [bus 04-04]
pci 0000:00:15.1: > bridge window [io 0x2000-0x2fff]
pci 0000:00:15.1: > bridge window [mem 0xf0100000-0xf01fffff]
pci 0000:00:15.1: > bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
pci_bus 0000:00: >resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 5 [mem 0x000c0000-0x000c1fff]
pci_bus 0000:00: >resource 6 [mem 0x000c2000-0x000c3fff]
pci_bus 0000:00: >resource 7 [mem 0x000c4000-0x000c5fff]
pci_bus 0000:00: >resource 8 [mem 0x000c6000-0x000c7fff]
pci_bus 0000:00: >resource 9 [mem 0x000c8000-0x000c9fff]
pci_bus 0000:00: >resource 10 [mem 0x000ca000-0x000cbfff]
pci_bus 0000:00: >resource 11 [mem 0x000cc000-0x000cdfff]
pci_bus 0000:00: >resource 12 [mem 0x000d0000-0x000d1fff]
pci_bus 0000:00: >resource 13 [mem 0x000d2000-0x000d3fff]
pci_bus 0000:00: >resource 14 [mem 0x000d4000-0x000d5fff]
pci_bus 0000:00: >resource 15 [mem 0x000d6000-0x000d7fff]
pci_bus 0000:00: >resource 16 [mem 0x000d8000-0x000d9fff]
pci_bus 0000:00: >resource 17 [mem 0x000da000-0x000dbfff]
pci_bus 0000:00: >resource 18 [mem 0x000dc000-0x000ddfff]
pci_bus 0000:00: >resource 19 [mem 0x000de000-0x000dffff]
pci_bus 0000:00: >resource 20 [mem 0x000e0000-0x000e1fff]
pci_bus 0000:00: >resource 21 [mem 0x000e2000-0x000e3fff]
pci_bus 0000:00: >resource 22 [mem 0x000e4000-0x000e5fff]
pci_bus 0000:00: >resource 23 [mem 0x000e6000-0x000e7fff]
pci_bus 0000:00: >resource 24 [mem 0x000e8000-0x000e9fff]
pci_bus 0000:00: >resource 25 [mem 0x000ea000-0x000ebfff]
pci_bus 0000:00: >resource 26 [mem 0x000ec000-0x000edfff]
pci_bus 0000:00: >resource 27 [mem 0x000ee000-0x000effff]
pci_bus 0000:00: >resource 28 [mem 0xe0000000-0xf7ffffff]
pci_bus 0000:00: >resource 29 [mem 0xf8000000-0xffffffff]
pci_bus 0000:00: >resource 30 [io 0x0000-0x0cf7]
pci_bus 0000:00: >resource 31 [io 0x0d00-0xffff]
pci_bus 0000:01: >resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: >resource 1 [mem 0xf0300000-0xf03fffff]
pci_bus 0000:01: >resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:02: >resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: >resource 5 [mem 0x000c0000-0x000c1fff]
pci_bus 0000:02: >resource 6 [mem 0x000c2000-0x000c3fff]
pci_bus 0000:02: >resource 7 [mem 0x000c4000-0x000c5fff]
pci_bus 0000:02: >resource 8 [mem 0x000c6000-0x000c7fff]
pci_bus 0000:02: >resource 9 [mem 0x000c8000-0x000c9fff]
pci_bus 0000:02: >resource 10 [mem 0x000ca000-0x000cbfff]
pci_bus 0000:02: >resource 11 [mem 0x000cc000-0x000cdfff]
pci_bus 0000:02: >resource 12 [mem 0x000d0000-0x000d1fff]
pci_bus 0000:02: >resource 13 [mem 0x000d2000-0x000d3fff]
pci_bus 0000:02: >resource 14 [mem 0x000d4000-0x000d5fff]
pci_bus 0000:02: >resource 15 [mem 0x000d6000-0x000d7fff]
pci_bus 0000:02: >resource 16 [mem 0x000d8000-0x000d9fff]
pci_bus 0000:02: >resource 17 [mem 0x000da000-0x000dbfff]
pci_bus 0000:02: >resource 18 [mem 0x000dc000-0x000ddfff]
pci_bus 0000:02: >resource 19 [mem 0x000de000-0x000dffff]
pci_bus 0000:02: >resource 20 [mem 0x000e0000-0x000e1fff]
pci_bus 0000:02: >resource 21 [mem 0x000e2000-0x000e3fff]
pci_bus 0000:02: >resource 22 [mem 0x000e4000-0x000e5fff]
pci_bus 0000:02: >resource 23 [mem 0x000e6000-0x000e7fff]
pci_bus 0000:02: >resource 24 [mem 0x000e8000-0x000e9fff]
pci_bus 0000:02: >resource 25 [mem 0x000ea000-0x000ebfff]
pci_bus 0000:02: >resource 26 [mem 0x000ec000-0x000edfff]
pci_bus 0000:02: >resource 27 [mem 0x000ee000-0x000effff]
pci_bus 0000:02: >resource 28 [mem 0xe0000000-0xf7ffffff]
pci_bus 0000:02: >resource 29 [mem 0xf8000000-0xffffffff]
pci_bus 0000:02: >resource 30 [io 0x0000-0x0cf7]
pci_bus 0000:02: >resource 31 [io 0x0d00-0xffff]
pci_bus 0000:04: >resource 0 [io 0x2000-0x2fff]
pci_bus 0000:04: >resource 1 [mem 0xf0100000-0xf01fffff]
pci_bus 0000:04: >resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: >Boot video device
PCI: CLS 32 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbfd36000-0xc3d35fff] (64MB) mapped at [ffff8800bfd36000-ffff8800c3d35fff]
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
audit: initializing netlink socket (disabled)
type=2000 audit(1365538396.324:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 7070
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:06.0: >irq 40 for MSI/MSI-X
pcieport 0000:00:15.0: >irq 41 for MSI/MSI-X
pcieport 0000:00:15.1: >irq 42 for MSI/MSI-X
pcieport 0000:00:06.0: >Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:06.0:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:15.0: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:15.0:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:15.1: >Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:15.1:pcie01: >service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:15.1:pcie04: >HPC vendor_id 1002 device_id 43a1 ss_vid 1002 ss_did 0
pciehp 0000:00:15.1:pcie04: >service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, mapped to 0xffffc90003100000, using 1216k, total 1216k
efifb: mode is 640x480x32, linelength=2560, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 80x30
fb0: EFI VGA frame buffer device
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: >registered as thermal_zone0
ACPI: Thermal Zone [THZ0] (67 C)
ACPI: Battery Slot [BAT1] (battery present)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: >version 3.0
ahci 0000:00:11.0: >AHCI 0001.0200 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:11.0: >flags: 64bit ncq sntf ilck pm led clo pmp pio ccc
scsi0 : ahci
ata1: SATA max UDMA/133 abar m1024@0xf024a000 port 0xf024a100 irq 19
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: >EHCI Host Controller
ehci_hcd 0000:00:12.2: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
QUIRK: Enable AMD PLL fix
ehci_hcd 0000:00:12.2: >debug port 1
ehci_hcd 0000:00:12.2: >irq 17, io mem 0xf024a500
ehci_hcd 0000:00:12.2: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb1: >SerialNumber: 0000:00:12.2
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >5 ports detected
ehci_hcd 0000:00:13.2: >EHCI Host Controller
ehci_hcd 0000:00:13.2: >new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: >debug port 1
ehci_hcd 0000:00:13.2: >irq 17, io mem 0xf024a400
ACPI: Battery Slot [BAT1] (battery present)
ehci_hcd 0000:00:13.2: >USB 2.0 started, EHCI 1.00
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: EHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb2: >SerialNumber: 0000:00:13.2
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >5 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: >OHCI Host Controller
ohci_hcd 0000:00:12.0: >new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: >irq 18, io mem 0xf0249000
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: OHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb3: >SerialNumber: 0000:00:12.0
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >5 ports detected
ohci_hcd 0000:00:13.0: >OHCI Host Controller
ohci_hcd 0000:00:13.0: >new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.0: >irq 18, io mem 0xf0248000
Freeing initrd memory: 14896k freed
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: OHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb4: >SerialNumber: 0000:00:13.0
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >5 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: >RTC can wake from S4
rtc_cmos 00:04: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 9:951:244
rtc_cmos 00:04: >setting system clock to 2013-04-09 20:13:17 UTC (1365538397)
powernow-k8: Found 1 AMD E-350 Processor (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (1600 MHz)
powernow-k8: 1 : pstate 1 (1280 MHz)
powernow-k8: 2 : pstate 2 (800 MHz)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD2500BEVT-08A23T1, 02.01A02, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: >Direct-Access ATA WDC WD2500BEVT-0 02.0 PQ: 0 ANSI: 5
sd 0:0:0:0: >Attached scsi generic sg0 type 0
sd 0:0:0:0: >[sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: >[sda] Write Protect is off
sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 3-4: >new full-speed USB device number 2 using ohci_hcd
sda: sda1 sda2 sda3 sda4 sda5
sd 0:0:0:0: >[sda] Attached SCSI disk
Freeing unused kernel memory: 928k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1472k freed
Freeing unused kernel memory: 1124k freed
udevd[91]: starting version 175
microcode: CPU0: patch_level=0x05000028
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
usb 3-4: >New USB device found, idVendor=0a5c, idProduct=217f
usb 3-4: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
r8169 0000:01:00.0: >irq 43 for MSI/MSI-X
r8169 0000:01:00.0: >eth0: RTL8168d/8111d at 0xffffc90000678000, 60:eb:69:d9:6b:67, XID 083000c0 IRQ 43
r8169 0000:01:00.0: >eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usb 3-4: >Product: Broadcom Bluetooth Device
usb 3-4: >Manufacturer: Broadcom Corp
usb 3-4: >SerialNumber: E02A82F2F9B6
usb 2-2: >new high-speed USB device number 2 using ehci_hcd
Refined TSC clocksource calibration: 1596.600 MHz.
Switching to clocksource tsc
microcode: CPU1: patch_level=0x05000028
microcode: Microcode Update Driver: v2.00 , Peter Oruba
usb 2-2: >New USB device found, idVendor=0bda, idProduct=0158
usb 2-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: >Product: USB2.0-CRW
usb 2-2: >Manufacturer: Generic
usb 2-2: >SerialNumber: 20071114173400000
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 2-5: >new high-speed USB device number 3 using ehci_hcd
usb 2-5: >New USB device found, idVendor=04f2, idProduct=b1b4
usb 2-5: >New USB device strings: Mfr=1, Product=2, SerialNumber=2
usb 2-5: >Product: Integrated Camera
usb 2-5: >Manufacturer: Image Processor
usb 2-5: >SerialNumber: Integrated Camera
EXT4-fs (sda4): INFO: recovery required on readonly filesystem
EXT4-fs (sda4): write access will be enabled during recovery
EXT4-fs (sda4): orphan cleanup on readonly fs
EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 6169628
EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 6169611
EXT4-fs (sda4): 2 orphan inodes deleted
EXT4-fs (sda4): recovery complete
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
Adding 5631832k swap on /dev/sda5. Priority:-1 extents:1 across:5631832k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[362]: starting version 175
lp: driver loaded but no devices found
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
wmi: Mapper loaded
acpi device:35: >registered as cooling_device2
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5
[fglrx] Maximum main memory to use for locked dma buffers: 3398 MBytes.
[fglrx] vendor: 1002 device: 9802 count: 1
[fglrx] ioport: bar 1, base 0x4000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 9.0.2 [Sep 20 2012] with 1 minors
Non-volatile memory driver v1.3
thinkpad_acpi: ThinkPad ACPI Extras v0.24
thinkpad_acpi:
thinkpad_acpi: ThinkPad BIOS 8FET33WW (1.17 ), EC unknown
thinkpad_acpi: Lenovo ThinkPad X120e, model 0596CTO
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
thinkpad_acpi: detected a 8-level brightness capable ThinkPad
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMB_.SMB0 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
sp5100_tco: mmio address 0xb80830 already in use
usbcore: registered new interface driver btusb
Linux video capture interface: v2.00
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
Registered led device: tpacpi::thinkvantage
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b1b4)
cfg80211: Calling CRDA to update world regulatory domain
input: Integrated Camera as /devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
cfg80211: Pending regulatory request, waiting for it to be processed...
rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
snd_hda_intel 0000:00:01.1: >irq 44 for MSI/MSI-X
usbcore: registered new interface driver uas
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
kvm: disabled by bios
hda_codec: CX20582 (Pebble): BIOS auto-probing.
usb 2-2: >USB disconnect, device number 2
input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
scsi1 : usb-storage 2-2:1.0
usbcore: registered new interface driver ums-realtek
kvm: disabled by bios
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
ieee80211 phy0: >Selected rate control algorithm 'rtl_rc'
rtlwifi: wireless switch is on
init: failsafe main process (722) killed by TERM signal
psmouse serio4: >synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd000b3/0x340000/0xa0400
psmouse serio4: >synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ppdev: user-space parallel port driver
r8169 0000:01:00.0: >eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with c8:60:00:95:29:96
wlan0: send auth to c8:60:00:95:29:96 (try 1/3)
wlan0: authenticated
wlan0: associating with AP with corrupt beacon
wlan0: associate with c8:60:00:95:29:96 (try 1/3)
wlan0: RX AssocResp from c8:60:00:95:29:96 (capab=0xc11 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: US
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Disabling freq 2467 MHz
cfg80211: Disabling freq 2472 MHz
cfg80211: Disabling freq 2484 MHz
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
init: plymouth-stop pre-start process (1298) terminated with status 1
fglrx_pci 0000:00:01.0: >irq 45 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1301
[fglrx] Firegl kernel thread PID: 1302
[fglrx] Firegl kernel thread PID: 1303
[fglrx] IRQ 45 Enabled
[fglrx] Gart USWC size:1112 M.
[fglrx] Gart cacheable size:440 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fc84000, size:37c000
[fglrx] Reserved FB block: Unshared offset:17ff4000, size:c000
[fglrx] ATIF platform detected with notification ID: 0x81
psmouse serio5: >trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input12
usb 1-3: >new high-speed USB device number 3 using ehci_hcd
usb 1-3: >New USB device found, idVendor=13fe, idProduct=1f23
usb 1-3: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: >Product: Driver
usb 1-3: >Manufacturer: USB
usb 1-3: >SerialNumber: E6880C00040B
scsi2 : usb-storage 1-3:1.0
scsi 2:0:0:0: >Direct-Access USB Driver 0.00 PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: >Attached scsi generic sg1 type 0
sd 2:0:0:0: >[sdb] 31318016 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 2:0:0:0: >[sdb] Write Protect is off
sd 2:0:0:0: >[sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: >[sdb] No Caching mode page present
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] No Caching mode page present
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: >[sdb] No Caching mode page present
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Attached SCSI removable disk
sdb: detected capacity change from 16034824192 to 0
usb 1-3: >USB disconnect, device number 3
wlan0: deauthenticated from c8:60:00:95:29:96 (Reason: 6)
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with c8:60:00:95:29:96
wlan0: send auth to c8:60:00:95:29:96 (try 1/3)
wlan0: authenticated
wlan0: associating with AP with corrupt beacon
wlan0: associate with c8:60:00:95:29:96 (try 1/3)
wlan0: RX AssocResp from c8:60:00:95:29:96 (capab=0xc11 status=41 aid=1)
wlan0: c8:60:00:95:29:96 denied association (code=41)
wlan0: deauthenticating from c8:60:00:95:29:96 by local choice (reason=3)
wlan0: authenticate with c8:60:00:95:29:96
wlan0: send auth to c8:60:00:95:29:96 (try 1/3)
wlan0: authenticated
wlan0: associating with AP with corrupt beacon
wlan0: associate with c8:60:00:95:29:96 (try 1/3)
wlan0: RX AssocResp from c8:60:00:95:29:96 (capab=0xc11 status=0 aid=2)
wlan0: associated
cfg80211: Calling CRDA for country: US
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Disabling freq 2467 MHz
cfg80211: Disabling freq 2472 MHz
cfg80211: Disabling freq 2484 MHz
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
wlan0: deauthenticating from c8:60:00:95:29:96 by local choice (reason=3)
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.06 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
PM: suspend of drv:psmouse dev:serio5 complete after 140.767 msecs
sd 0:0:0:0: >[sda] Synchronizing SCSI cache
pciehp 0000:00:15.1:pcie04: >pciehp_suspend ENTRY
[fglrx] IRQ 45 Disabled
[fglrx] Preparing suspend fglrx in kernel.
sd 0:0:0:0: >[sda] Stopping disk
ACPI handle has no context!
PM: suspend of drv:snd_hda_intel dev:0000:00:01.1 complete after 119.645 msecs
PM: suspend of drv:snd_hda_intel dev:0000:00:14.2 complete after 120.654 msecs
[fglrx] Suspending fglrx in kernel completed.
[fglrx] Power down the ASIC .
PM: suspend of drv:fglrx_pci dev:0000:00:01.0 complete after 187.323 msecs
PM: suspend of drv:sd dev:0:0:0:0 complete after 736.454 msecs
PM: suspend of drv:scsi dev:target0:0:0 complete after 736.249 msecs
PM: suspend of drv:scsi dev:host0 complete after 687.197 msecs
PM: suspend of drv: dev:ata1 complete after 687.265 msecs
PM: suspend of drv:ahci dev:0000:00:11.0 complete after 686.235 msecs
PM: suspend of drv: dev:pci0000:00 complete after 686.027 msecs
PM: suspend of devices complete after 877.833 msecs
PM: suspend devices took 0.876 seconds
PM: late suspend of devices complete after 0.207 msecs
pcieport 0000:00:06.0: >wake-up capability enabled by ACPI
ehci_hcd 0000:00:13.2: >wake-up capability enabled by ACPI
ohci_hcd 0000:00:13.0: >wake-up capability enabled by ACPI
ohci_hcd 0000:00:12.0: >wake-up capability enabled by ACPI
PM: noirq suspend of devices complete after 61.489 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 17
Broke affinity for irq 19
CPU 1 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
Booting Node 0 Processor 1 APIC 0x1
LVT offset 0 assigned for vector 0x400
CPU1 is up
ACPI: Waking up from system sleep state S3
ahci 0000:00:11.0: >set SATA to AHCI mode
ohci_hcd 0000:00:12.0: >wake-up capability disabled by ACPI
ohci_hcd 0000:00:13.0: >wake-up capability disabled by ACPI
ehci_hcd 0000:00:13.2: >wake-up capability disabled by ACPI
PM: noirq resume of devices complete after 32.761 msecs
PM: early resume of devices complete after 0.113 msecs
snd_hda_intel 0000:00:01.1: >irq 44 for MSI/MSI-X
pciehp 0000:00:15.1:pcie04: >pciehp_resume ENTRY
pcieport 0000:00:06.0: >wake-up capability disabled by ACPI
rtlwifi: wireless switch is on
[fglrx] Power up the ASIC
[fglrx] Preparing resume fglrx in kernel.
[fglrx] Resuming fglrx in kernel completed.
[fglrx] IRQ 45 Enabled
PM: resume of drv: dev:ep_00 complete after 130.227 msecs
PM: resume of drv:usb dev:2-5 complete after 129.092 msecs
PM: resume of drv:hub dev:2-0:1.0 complete after 130.339 msecs
PM: resume of drv: dev:ep_81 complete after 130.431 msecs
PM: resume of drv: dev:ep_00 complete after 188.102 msecs
PM: resume of drv:hub dev:1-0:1.0 complete after 188.207 msecs
PM: resume of drv: dev:ep_81 complete after 188.331 msecs
PM: resume of drv:usb dev:3-4 complete after 181.473 msecs
PM: resume of drv: dev:ep_00 complete after 181.933 msecs
PM: resume of drv:hub dev:3-0:1.0 complete after 182.056 msecs
PM: resume of drv: dev:ep_81 complete after 182.018 msecs
usb 2-5: >reset high-speed USB device number 3 using ehci_hcd
usb 3-4: >reset full-speed USB device number 2 using ohci_hcd
PM: resume of drv:uvcvideo dev:2-5:1.1 complete after 624.921 msecs
PM: resume of drv: dev:ep_00 complete after 624.904 msecs
PM: resume of drv:uvcvideo dev:2-5:1.0 complete after 625.053 msecs
PM: resume of drv: dev:ep_83 complete after 625.104 msecs
btusb 3-4:1.0: >no reset_resume for driver btusb?
btusb 3-4:1.1: >no reset_resume for driver btusb?
PM: resume of drv:usb dev:3-4:1.1 complete after 676.080 msecs
PM: resume of drv:usb dev:3-4:1.2 complete after 675.995 msecs
PM: resume of drv:usb dev:3-4:1.3 complete after 675.898 msecs
PM: resume of drv: dev:ep_00 complete after 675.869 msecs
PM: resume of drv: dev:ep_83 complete after 676.094 msecs
PM: resume of drv: dev:ep_03 complete after 676.065 msecs
PM: resume of drv:usb dev:3-4:1.0 complete after 676.285 msecs
PM: resume of drv: dev:ep_84 complete after 675.994 msecs
PM: resume of drv: dev:ep_04 complete after 675.974 msecs
PM: resume of drv: dev:ep_82 complete after 676.280 msecs
PM: resume of drv: dev:ep_81 complete after 676.331 msecs
PM: resume of drv: dev:ep_02 complete after 676.258 msecs
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
PM: resume of drv:ata_port dev:ata1 complete after 2399.306 msecs
PM: resume of drv:scsi dev:host0 complete after 2484.344 msecs
PM: resume of drv:scsi_host dev:host0 complete after 2484.285 msecs
PM: resume of drv:scsi dev:target0:0:0 complete after 2441.818 msecs
PM: resume of drv:sd dev:0:0:0:0 complete after 2441.785 msecs
sd 0:0:0:0: >[sda] Starting disk
PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2452.926 msecs
PM: resume of devices complete after 2526.745 msecs
PM: resume devices took 2.528 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
usb 2-2: >new high-speed USB device number 4 using ehci_hcd
video LNXVIDEO:01: >Restoring backlight state
usb 2-2: >New USB device found, idVendor=0bda, idProduct=0158
usb 2-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: >Product: USB2.0-CRW
usb 2-2: >Manufacturer: Generic
usb 2-2: >SerialNumber: 20071114173400000
scsi3 : usb-storage 2-2:1.0
usb 2-2: >USB disconnect, device number 4
r8169 0000:01:00.0: >eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with c8:60:00:95:29:96
wlan0: send auth to c8:60:00:95:29:96 (try 1/3)
wlan0: authenticated
wlan0: associating with AP with corrupt beacon
wlan0: associate with c8:60:00:95:29:96 (try 1/3)
wlan0: RX AssocResp from c8:60:00:95:29:96 (capab=0xc11 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: US
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Disabling freq 2467 MHz
cfg80211: Disabling freq 2472 MHz
cfg80211: Disabling freq 2484 MHz
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
atkbd serio0: >Unknown key pressed (translated set 2, code 0xf1 on isa0060/serio0).
atkbd serio0: >Use 'setkeycodes e071 ' to make it known.
atkbd serio0: >Unknown key released (translated set 2, code 0xf1 on isa0060/serio0).
atkbd serio0: >Use 'setkeycodes e071 ' to make it known.
wlan0: deauthenticating from c8:60:00:95:29:96 by local choice (reason=3)
thinkpad_acpi: unknown possible thermal alarm or keyboard event received
thinkpad_acpi: temperatures (Celsius): 57 0 57 0 0 0 29 0
thinkpad_acpi: unhandled HKEY event 0x6040
thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.03 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
PM: suspend of drv:psmouse dev:serio5 complete after 152.677 msecs
sd 0:0:0:0: >[sda] Synchronizing SCSI cache
sd 0:0:0:0: >[sda] Stopping disk
pciehp 0000:00:15.1:pcie04: >pciehp_suspend ENTRY
[fglrx] IRQ 45 Disabled
[fglrx] Preparing suspend fglrx in kernel.
ACPI handle has no context!
PM: suspend of drv:snd_hda_intel dev:0000:00:14.2 complete after 120.128 msecs
PM: suspend of drv:snd_hda_intel dev:0000:00:01.1 complete after 119.112 msecs
[fglrx] Suspending fglrx in kernel completed.
[fglrx] Power down the ASIC .
PM: suspend of drv:fglrx_pci dev:0000:00:01.0 complete after 187.318 msecs
PM: suspend of drv:sd dev:0:0:0:0 complete after 595.418 msecs
PM: suspend of drv:scsi dev:target0:0:0 complete after 595.258 msecs
PM: suspend of drv:scsi dev:host0 complete after 545.674 msecs
PM: suspend of drv: dev:ata1 complete after 545.770 msecs
PM: suspend of drv:ahci dev:0000:00:11.0 complete after 544.584 msecs
PM: suspend of drv: dev:pci0000:00 complete after 541.455 msecs
PM: suspend of devices complete after 748.734 msecs
PM: suspend devices took 0.748 seconds
PM: late suspend of devices complete after 0.239 msecs
pcieport 0000:00:06.0: >wake-up capability enabled by ACPI
ehci_hcd 0000:00:13.2: >wake-up capability enabled by ACPI
ohci_hcd 0000:00:13.0: >wake-up capability enabled by ACPI
ohci_hcd 0000:00:12.0: >wake-up capability enabled by ACPI
PM: noirq suspend of devices complete after 62.487 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
Booting Node 0 Processor 1 APIC 0x1
LVT offset 0 assigned for vector 0x400
CPU1 is up
ACPI: Waking up from system sleep state S3
ahci 0000:00:11.0: >set SATA to AHCI mode
ohci_hcd 0000:00:12.0: >wake-up capability disabled by ACPI
ohci_hcd 0000:00:13.0: >wake-up capability disabled by ACPI
ehci_hcd 0000:00:13.2: >wake-up capability disabled by ACPI
PM: noirq resume of devices complete after 32.723 msecs
PM: early resume of devices complete after 0.111 msecs
snd_hda_intel 0000:00:01.1: >irq 44 for MSI/MSI-X
pciehp 0000:00:15.1:pcie04: >pciehp_resume ENTRY
pcieport 0000:00:06.0: >wake-up capability disabled by ACPI
[fglrx] Power up the ASIC
[fglrx] Preparing resume fglrx in kernel.
[fglrx] Resuming fglrx in kernel completed.
rtlwifi: wireless switch is on
[fglrx] IRQ 45 Enabled
PM: resume of drv:hub dev:2-0:1.0 complete after 129.961 msecs
PM: resume of drv: dev:ep_00 complete after 129.925 msecs
PM: resume of drv:usb dev:2-5 complete after 128.902 msecs
PM: resume of drv: dev:ep_81 complete after 129.994 msecs
PM: resume of drv: dev:ep_00 complete after 146.114 msecs
PM: resume of drv:hub dev:1-0:1.0 complete after 146.435 msecs
PM: resume of drv: dev:ep_81 complete after 146.559 msecs
PM: resume of drv:usb dev:3-4 complete after 181.354 msecs
PM: resume of drv: dev:ep_00 complete after 181.783 msecs
PM: resume of drv:hub dev:3-0:1.0 complete after 181.976 msecs
PM: resume of drv: dev:ep_81 complete after 181.858 msecs
usb 2-5: >reset high-speed USB device number 3 using ehci_hcd
usb 3-4: >reset full-speed USB device number 2 using ohci_hcd
PM: resume of drv: dev:ep_00 complete after 625.005 msecs
PM: resume of drv:uvcvideo dev:2-5:1.1 complete after 625.098 msecs
PM: resume of drv:uvcvideo dev:2-5:1.0 complete after 625.190 msecs
PM: resume of drv: dev:ep_83 complete after 625.291 msecs
btusb 3-4:1.0: >no reset_resume for driver btusb?
btusb 3-4:1.1: >no reset_resume for driver btusb?
PM: resume of drv:usb dev:3-4:1.0 complete after 675.641 msecs
PM: resume of drv:usb dev:3-4:1.2 complete after 675.380 msecs
PM: resume of drv: dev:ep_00 complete after 675.264 msecs
PM: resume of drv:usb dev:3-4:1.1 complete after 675.516 msecs
PM: resume of drv: dev:ep_84 complete after 675.377 msecs
PM: resume of drv: dev:ep_04 complete after 675.348 msecs
PM: resume of drv:usb dev:3-4:1.3 complete after 675.315 msecs
PM: resume of drv: dev:ep_81 complete after 675.653 msecs
PM: resume of drv: dev:ep_03 complete after 675.499 msecs
PM: resume of drv: dev:ep_82 complete after 675.643 msecs
PM: resume of drv: dev:ep_83 complete after 675.542 msecs
PM: resume of drv: dev:ep_02 complete after 675.617 msecs
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
PM: resume of drv:ata_port dev:ata1 complete after 2344.025 msecs
PM: resume of drv:scsi dev:host0 complete after 2390.459 msecs
PM: resume of drv:scsi_host dev:host0 complete after 2390.481 msecs
PM: resume of drv:scsi dev:target0:0:0 complete after 2389.736 msecs
PM: resume of drv:sd dev:0:0:0:0 complete after 2389.739 msecs
sd 0:0:0:0: >[sda] Starting disk
PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2404.339 msecs
PM: resume of devices complete after 2474.767 msecs
PM: resume devices took 2.476 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
usb 2-2: >new high-speed USB device number 5 using ehci_hcd
video LNXVIDEO:01: >Restoring backlight state
usb 2-2: >New USB device found, idVendor=0bda, idProduct=0158
usb 2-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: >Product: USB2.0-CRW
usb 2-2: >Manufacturer: Generic
usb 2-2: >SerialNumber: 20071114173400000
scsi4 : usb-storage 2-2:1.0
usb 2-2: >USB disconnect, device number 5
r8169 0000:01:00.0: >eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with c8:60:00:95:29:96
wlan0: send auth to c8:60:00:95:29:96 (try 1/3)
wlan0: authenticated
wlan0: associating with AP with corrupt beacon
wlan0: associate with c8:60:00:95:29:96 (try 1/3)
wlan0: RX AssocResp from c8:60:00:95:29:96 (capab=0xc11 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: US
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Disabling freq 2467 MHz
cfg80211: Disabling freq 2472 MHz
cfg80211: Disabling freq 2484 MHz
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)