dmesg - KernelOld
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.6.9-mx (mweigand@pidwig) (gcc version 4.7.2 (Debian 4.7.2-5) ) #4 SMP PREEMPT Wed Jan 16 13:12:02 CET 2013
Disabled fast string operations
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x00000000da99efff] usable
BIOS-e820: [mem 0x00000000da99f000-0x00000000dae9efff] reserved
BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS
BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffd20000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021e5fffff] usable
NX (Execute Disable) protection: active
DMI 2.6 present.
DMI: LENOVO 4290W4H/4290W4H, BIOS 8DET51WW (1.21 ) 08/02/2011
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x21e600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0C0000000 mask FE0000000 write-back
4 base 0DC000000 mask FFC000000 uncachable
5 base 0DB000000 mask FFF000000 uncachable
6 base 100000000 mask F00000000 write-back
7 base 200000000 mask FE0000000 write-back
8 base 21F000000 mask FFF000000 uncachable
9 base 21E800000 mask FFF800000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0xdaffffff]
[mem 0x00000000-0xdaffffff] page 2M
kernel direct mapping tables up to 0xdaffffff @ [mem 0x1fffb000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x21e5fffff]
[mem 0x100000000-0x21e5fffff] page 2M
kernel direct mapping tables up to 0x21e5fffff @ [mem 0xda999000-0xda99efff]
RAMDISK: [mem 0x36db4000-0x376d1fff]
ACPI: RSDP 00000000000f00e0 00024 (v02 LENOVO)
ACPI: XSDT 00000000daffe120 000AC (v01 LENOVO TP-8D 00001210 PTEC 00000002)
ACPI: FACP 00000000dafe7000 000F4 (v04 LENOVO TP-8D 00001210 PTL 00000002)
ACPI: DSDT 00000000dafea000 0F643 (v01 LENOVO TP-8D 00001210 INTL 20061109)
ACPI: FACS 00000000daf2d000 00040
ACPI: SLIC 00000000daffd000 00176 (v01 LENOVO TP-8D 00001210 PTEC 00000001)
ACPI: SSDT 00000000daffc000 00249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
ACPI: SSDT 00000000daffb000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
ACPI: SSDT 00000000daffa000 007A7 (v01 LENOVO SataAhci 00001000 INTL 20061109)
ACPI: HPET 00000000dafe6000 00038 (v01 LENOVO TP-8D 00001210 PTL 00000002)
ACPI: APIC 00000000dafe5000 00098 (v01 LENOVO TP-8D 00001210 PTL 00000002)
ACPI: MCFG 00000000dafe4000 0003C (v01 LENOVO TP-8D 00001210 PTL 00000002)
ACPI: ECDT 00000000dafe3000 00052 (v01 LENOVO TP-8D 00001210 PTL 00000002)
ACPI: ASF! 00000000dafe9000 000A5 (v32 LENOVO TP-8D 00001210 PTL 00000002)
ACPI: TCPA 00000000dafe2000 00032 (v02 PTL LENOVO 06040000 LNVO 00000001)
ACPI: SSDT 00000000dafe1000 00A69 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 00000000dafe0000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: DMAR 00000000dafdf000 000E8 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: UEFI 00000000dafde000 0003E (v01 LENOVO TP-8D 00001210 PTL 00000002)
ACPI: UEFI 00000000dafdd000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
ACPI: UEFI 00000000dafdc000 00292 (v01 LENOVO TP-8D 00001210 PTL 00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021e5fffff]
Initmem setup node 0 [mem 0x00000000-0x21e5fffff]
NODE_DATA [mem 0x21e5fc000-0x21e5fffff]
[ffffea0000000000-ffffea00077fffff] PMD -> [ffff880215c00000-ffff88021cdfffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x21e5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x3fffffff]
node 0: [mem 0x40200000-0xda99efff]
node 0: [mem 0xdafff000-0xdaffffff]
node 0: [mem 0x100000000-0x21e5fffff]
On node 0 totalpages: 2067245
DMA zone: 56 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3919 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 875992 pages, LIFO batch:31
Normal zone: 16037 pages used for memmap
Normal zone: 1156955 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
PM: Registered nosave memory: 0000000040000000 - 0000000040200000
PM: Registered nosave memory: 00000000da99f000 - 00000000dae9f000
PM: Registered nosave memory: 00000000dae9f000 - 00000000daf9f000
PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000
PM: Registered nosave memory: 00000000db000000 - 00000000dfa00000
PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffd20000
PM: Registered nosave memory: 00000000ffd20000 - 0000000100000000
e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88021e200000 s78912 r8192 d23488 u262144
pcpu-alloc: s78912 r8192 d23488 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2036866
Policy zone: Normal
PCIe ASPM is forcibly enabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8066532k/8886272k available (5232k kernel code, 617292k absent, 202448k reserved, 2594k data, 648k init)
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
Dump stacks of tasks blocking RCU-preempt GP.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
NR_IRQS:33024 nr_irqs:744 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2691.373 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5382.74 BogoMIPS (lpj=2691373)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Disabled fast string operations
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift is 0x5
ACPI: Core revision 20120711
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz stepping 07
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Disabled fast string operations
Disabled fast string operations
Disabled fast string operations
smpboot: Booting Node 0, Processors #1 #2 #3
Brought up 4 CPUs
smpboot: Total of 4 processors activated (21530.98 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes)
dummy:
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: EC description table is found, configuring boot EC
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000dae8c018 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: SSDT 00000000dae8da98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: SSDT 00000000dae8bd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [PUBS] (on)
ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
ACPI: ACPI Dock Station Driver: 3 docks/bays found
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: busn_res: [bus 00-fe] is inserted under domain [bus 00-ff]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xf1625000-0xf162500f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 10: [mem 0xf1600000-0xf161ffff]
pci 0000:00:19.0: reg 14: [mem 0xf162b000-0xf162bfff]
pci 0000:00:19.0: reg 18: [io 0x4080-0x409f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xf162a000-0xf162a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf1620000-0xf1623fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xf1629000-0xf16293ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0x40a8-0x40af]
pci 0000:00:1f.2: reg 14: [io 0x40b4-0x40b7]
pci 0000:00:1f.2: reg 18: [io 0x40a0-0x40a7]
pci 0000:00:1f.2: reg 1c: [io 0x40b0-0x40b3]
pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
pci 0000:00:1f.2: reg 24: [mem 0xf1628000-0xf16287ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf1624000-0xf16240ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-fe]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-fe]
pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
pci 0000:03:00.0: reg 10: [mem 0xf1500000-0xf1501fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf1500000-0xf15fffff]
pci_bus 0000:0d: busn_res: [bus 0d] is inserted under [bus 00-fe]
pci 0000:0d:00.0: [1180:e823] type 00 class 0x088001
pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
pci 0000:0d:00.0: reg 10: [mem 0xf0d00000-0xf0d000ff]
pci 0000:0d:00.0: supports D1 D2
pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 0d]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xf0d00000-0xf14fffff]
pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
pci_bus 0000:0e: busn_res: [bus 0e] is inserted under [bus 00-fe]
pci 0000:0e:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:0e:00.0: reg 10: [mem 0xf0c00000-0xf0c01fff 64bit]
pci 0000:0e:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 0e]
pci 0000:00:1c.6: bridge window [mem 0xf0c00000-0xf0cfffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP7._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
Linux media interface: v0.10
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Version 1.0.25.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xda99f000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
e820: reserve RAM buffer [mem 0x21e600000-0x21fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0x00000000-0x0009ffff]
pnp 00:00: [mem 0x000c0000-0x000c3fff]
pnp 00:00: [mem 0x000c4000-0x000c7fff]
pnp 00:00: [mem 0x000c8000-0x000cbfff]
pnp 00:00: [mem 0x000cc000-0x000cffff]
pnp 00:00: [mem 0x000d0000-0x000d3fff]
pnp 00:00: [mem 0x000d4000-0x000d7fff]
pnp 00:00: [mem 0x000d8000-0x000dbfff]
pnp 00:00: [mem 0x000dc000-0x000dffff]
pnp 00:00: [mem 0x000e0000-0x000e3fff]
pnp 00:00: [mem 0x000e4000-0x000e7fff]
pnp 00:00: [mem 0x000e8000-0x000ebfff]
pnp 00:00: [mem 0x000ec000-0x000effff]
pnp 00:00: [mem 0x000f0000-0x000fffff]
pnp 00:00: [mem 0x00100000-0xdf9fffff]
pnp 00:00: [mem 0xfec00000-0xfed3ffff]
pnp 00:00: [mem 0xfed4c000-0xffffffff]
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [bus 00-fe]
pnp 00:01: [io 0x0cf8-0x0cff]
pnp 00:01: [io 0x0000-0x0cf7 window]
pnp 00:01: [io 0x0d00-0xffff window]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0x000c0000-0x000c3fff window]
pnp 00:01: [mem 0x000c4000-0x000c7fff window]
pnp 00:01: [mem 0x000c8000-0x000cbfff window]
pnp 00:01: [mem 0x000cc000-0x000cffff window]
pnp 00:01: [mem 0x000d0000-0x000d3fff window]
pnp 00:01: [mem 0x000d4000-0x000d7fff window]
pnp 00:01: [mem 0x000d8000-0x000dbfff window]
pnp 00:01: [mem 0x000dc000-0x000dffff window]
pnp 00:01: [mem 0x000e0000-0x000e3fff window]
pnp 00:01: [mem 0x000e4000-0x000e7fff window]
pnp 00:01: [mem 0x000e8000-0x000ebfff window]
pnp 00:01: [mem 0x000ec000-0x000effff window]
pnp 00:01: [mem 0xdfa00000-0xfebfffff window]
pnp 00:01: [mem 0xfed40000-0xfed4bfff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:02: [io 0x0010-0x001f]
pnp 00:02: [io 0x0090-0x009f]
pnp 00:02: [io 0x0024-0x0025]
pnp 00:02: [io 0x0028-0x0029]
pnp 00:02: [io 0x002c-0x002d]
pnp 00:02: [io 0x0030-0x0031]
pnp 00:02: [io 0x0034-0x0035]
pnp 00:02: [io 0x0038-0x0039]
pnp 00:02: [io 0x003c-0x003d]
pnp 00:02: [io 0x00a4-0x00a5]
pnp 00:02: [io 0x00a8-0x00a9]
pnp 00:02: [io 0x00ac-0x00ad]
pnp 00:02: [io 0x00b0-0x00b5]
pnp 00:02: [io 0x00b8-0x00b9]
pnp 00:02: [io 0x00bc-0x00bd]
pnp 00:02: [io 0x0050-0x0053]
pnp 00:02: [io 0x0072-0x0077]
pnp 00:02: [io 0x0400-0x047f]
pnp 00:02: [io 0x0500-0x057f]
pnp 00:02: [io 0x0800-0x080f]
pnp 00:02: [io 0x15e0-0x15ef]
pnp 00:02: [io 0x1600-0x167f]
pnp 00:02: [mem 0xf8000000-0xfbffffff]
pnp 00:02: [mem 0x00000000-0x00000fff]
pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
pnp 00:02: [mem 0xfed10000-0xfed13fff]
pnp 00:02: [mem 0xfed18000-0xfed18fff]
pnp 00:02: [mem 0xfed19000-0xfed19fff]
pnp 00:02: [mem 0xfed45000-0xfed4bfff]
system 00:02: [io 0x0400-0x047f] has been reserved
system 00:02: [io 0x0500-0x057f] has been reserved
system 00:02: [io 0x0800-0x080f] has been reserved
system 00:02: [io 0x15e0-0x15ef] has been reserved
system 00:02: [io 0x1600-0x167f] has been reserved
system 00:02: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:02: [mem 0x00000000-0x00000fff] could not be reserved
system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0080-0x008f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: [dma 4]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x00f0]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io 0x0070-0x0071]
pnp 00:07: [irq 8]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs LEN0020 PNP0f13 (active)
pnp 00:0a: [mem 0xfed40000-0xfed44fff]
pnp 00:0a: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf1500000-0xf15fffff]
pci 0000:00:1c.4: PCI bridge to [bus 0d]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xf0d00000-0xf14fffff]
pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
pci 0000:00:1c.6: PCI bridge to [bus 0e]
pci 0000:00:1c.6: bridge window [mem 0xf0c00000-0xf0cfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
pci_bus 0000:03: resource 1 [mem 0xf1500000-0xf15fffff]
pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:0d: resource 1 [mem 0xf0d00000-0xf14fffff]
pci_bus 0000:0d: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
pci_bus 0000:0e: resource 1 [mem 0xf0c00000-0xf0cfffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 9336k freed
dmar: Host address width 36
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
dmar: RMRR base: 0x000000dacd5000 end: 0x000000dacebfff
dmar: RMRR base: 0x000000db800000 end: 0x000000df9fffff
DMAR: No ATSR found
IOMMU 0 0xfed90000: using Queued invalidation
IOMMU 1 0xfed91000: using Queued invalidation
IOMMU: Setting RMRR:
IOMMU: Setting identity map for device 0000:00:02.0 [0xdb800000 - 0xdf9fffff]
IOMMU: Setting identity map for device 0000:00:1d.0 [0xdacd5000 - 0xdacebfff]
IOMMU: Setting identity map for device 0000:00:1a.0 [0xdacd5000 - 0xdacebfff]
IOMMU: Prepare 0-16MiB unity mapping for LPC
IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
audit: initializing netlink socket (disabled)
type=2000 audit(1365459050.806:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
fuse init (API version 7.20)
Btrfs loaded
msgmni has been set to 15901
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:00.0: Intel Sandybridge Chipset
pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
pci 0000:00:00.0: detected 65536K stolen memory
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 42 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
tsc: Refined TSC clocksource calibration: 2691.258 MHz
Switching to clocksource tsc
acpi device:01: registered as cooling_device0
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
brd: module loaded
loop: module loaded
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e823] (rev 4)
mmc0: no vmmc regulator found
Registered led device: mmc0::
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
thinkpad_acpi: ThinkPad ACPI Extras v0.24
thinkpad_acpi:
thinkpad_acpi: ThinkPad BIOS 8DET51WW (1.21 ), EC unknown
thinkpad_acpi: Lenovo ThinkPad X220, model 4290W4H
thinkpad_acpi: detected a 8-level brightness capable ThinkPad
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
Registered led device: tpacpi::thinkvantage
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
hdaps: supported laptop not found!
hdaps: driver init failed (ret=-19)!
snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:07: setting system clock to 2013-04-08 22:10:53 UTC (1365459053)
ALSA device list:
#0: HDA Intel PCH at 0xf1620000 irq 43
#29: ThinkPad Console Audio Control at EC reg 0x30, fw unknown
Freeing unused kernel memory: 648k freed
udevd[65]: starting version 175
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf162a000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.6.9-mx ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (51 C)
xhci_hcd 0000:0e:00.0: xHCI Host Controller
xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:0e:00.0: irq 18, io mem 0xf0c00000
xhci_hcd 0000:0e:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 49 for MSI/MSI-X
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.6.9-mx xhci_hcd
usb usb2: SerialNumber: 0000:0e:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:0e:00.0: xHCI Host Controller
xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.6.9-mx xhci_hcd
usb usb3: SerialNumber: 0000:0e:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
microcode: CPU0 updated to revision 0x28, date = 2012-04-24
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU1 updated to revision 0x28, date = 2012-04-24
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU2 updated to revision 0x28, date = 2012-04-24
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU3 updated to revision 0x28, date = 2012-04-24
perf_event_intel: PEBS enabled due to microcode update
microcode: Microcode Update Driver: v2.00 , Peter Oruba
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:92:77:2a
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1629000
usb 1-1: new high-speed USB device number 2 using ehci_hcd
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.6.9-mx ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 50 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf1628000 port 0xf1628100 irq 50
ata2: SATA max UDMA/133 abar m2048@0xf1628000 port 0xf1628180 irq 50
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf1628000 port 0xf1628300 irq 50
ata6: DUMMY
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 4-1: new high-speed USB device number 2 using ehci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-8: INTEL SSDSA2CW160G3, 4PC10362, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2CW16 4PC1 PQ: 0 ANSI: 5
usb 4-1: New USB device found, idVendor=8087, idProduct=0024
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
usb 1-1.4: new full-speed USB device number 3 using ehci_hcd
usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: Broadcom Bluetooth Device
usb 1-1.4: Manufacturer: Broadcom Corp
usb 1-1.4: SerialNumber: EC55F9F8D938
ata2: SATA link down (SStatus 0 SControl 300)
usb 1-1.6: new high-speed USB device number 4 using ehci_hcd
usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6: Product: Integrated Camera
usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
usb 4-1.4: new high-speed USB device number 3 using ehci_hcd
usb 4-1.4: New USB device found, idVendor=0bdb, idProduct=1911
usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1.4: Product: F5521gw
usb 4-1.4: Manufacturer: Lenovo
usb 4-1.4: SerialNumber: FF5AE04D9023FD50
ata5: SATA link down (SStatus 0 SControl 300)
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
udevd[372]: starting version 175
ACPI: Requesting acpi_cpufreq
wmi: Mapper loaded
ACPI: AC Adapter [AC] (off-line)
cfg80211: Calling CRDA to update world regulatory domain
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro,discard
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Invalid Power Resource to register!
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20120711/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20120711/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
tpm_tis 00:0a: 1.2 TPM (device-id 0x0, rev-id 78)
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003-2012 Intel Corporation
iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
iwlwifi 0000:03:00.0: pci_resource_base = ffffc900056b4000
iwlwifi 0000:03:00.0: HW Revision ID = 0x34
iwlwifi 0000:03:00.0: irq 51 for MSI/MSI-X
input: PC Speaker as /devices/platform/pcspkr/input/input10
tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
cdc_acm 4-1.4:1.1: ttyACM0: USB ACM device
cdc_acm 4-1.4:1.3: ttyACM1: USB ACM device
cdc_acm 4-1.4:1.9: ttyACM2: USB ACM device
uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
cdc_wdm 4-1.4:1.5: cdc-wdm0: USB WDM device
cdc_wdm 4-1.4:1.8: cdc-wdm1: USB WDM device
usbcore: registered new interface driver cdc_wdm
iTCO_vendor_support: vendor-support=0
input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input11
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
iwlwifi 0000:03:00.0: loaded firmware version 17.168.5.3 build 42301
usb 4-1.4: MAC-Address: 02:80:37:ec:02:00
cdc_ncm 4-1.4:1.6: wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
usbcore: registered new interface driver cdc_ncm
iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
iwldvm: Copyright(c) 2003-2012 Intel Corporation
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P enabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
iwlwifi 0000:03:00.0: device EEPROM VER=0x715, CALIB=0x6
iwlwifi 0000:03:00.0: Device SKU: 0x1F0
iwlwifi 0000:03:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
Registered led device: phy0-led
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
Key type dns_resolver registered
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
vboxdrv: Found 4 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa030fd20
vboxdrv: fAsync=0 offMin=0x1bc offMax=0xfcc
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.1.18_Debian (interface 0x00190000).
vboxpci: pci-stub module not available, cannot detach PCI devices
vboxpci: IOMMU found
psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input12
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wwan0: link is not ready
wlan0: authenticate with 24:65:11:11:04:1a
wlan0: send auth to 24:65:11:11:04:1a (try 1/3)
wlan0: authenticated
wlan0: associate with 24:65:11:11:04:1a (try 1/3)
wlan0: RX AssocResp from 24:65:11:11:04:1a (capab=0x31 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
thinkpad_acpi: unknown possible thermal alarm or keyboard event received
thinkpad_acpi: unhandled HKEY event 0x6040
thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net
thinkpad_acpi: EC reports that Thermal Table has changed
wlan0: deauthenticating from 24:65:11:11:04:1a by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
i915 0000:00:02.0: power state changed by ACPI to D3hot
e1000e 0000:00:19.0: wake-up capability enabled by ACPI
PM: suspend of devices complete after 419.781 msecs
PM: late suspend of devices complete after 0.139 msecs
pcieport 0000:00:1c.6: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
PM: noirq suspend of devices complete after 43.841 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
microcode: CPU0 updated to revision 0x28, date = 2012-04-24
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
microcode: CPU1 updated to revision 0x28, date = 2012-04-24
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
microcode: CPU2 updated to revision 0x28, date = 2012-04-24
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
microcode: CPU3 updated to revision 0x28, date = 2012-04-24
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: \_SB_.PCI0.LPC_.EC__.BAT1 - docking
ACPI: Unable to dock!
i915 0000:00:02.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
pcieport 0000:00:1c.6: wake-up capability disabled by ACPI
PM: noirq resume of devices complete after 99.178 msecs
PM: early resume of devices complete after 0.035 msecs
e1000e 0000:00:19.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
usb usb2: root hub lost power or was reset
usb usb3: root hub lost power or was reset
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
i915 0000:00:02.0: setting latency timer to 64
xhci_hcd 0000:0e:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 49 for MSI/MSI-X
tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
usb 4-1.4: reset high-speed USB device number 3 using ehci_hcd
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
usb 4-1.4: device firmware changed
sd 0:0:0:0: [sda] Starting disk
usb 1-1.6: reset high-speed USB device number 4 using ehci_hcd
usb 1-1.4: reset full-speed USB device number 3 using ehci_hcd
btusb 1-1.4:1.0: no reset_resume for driver btusb?
btusb 1-1.4:1.1: no reset_resume for driver btusb?
Extended CMOS year: 2000
PM: resume of devices complete after 644.409 msecs
PM: Finishing wakeup.
usb 4-1.4: USB disconnect, device number 3
cdc_ncm 4-1.4:1.6: wwan0: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
usb 4-1.4: new high-speed USB device number 4 using ehci_hcd
usb 4-1.4: New USB device found, idVendor=0bdb, idProduct=1912
usb 4-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=5
usb 4-1.4: Product: \xffffffe3\xffffff95\xffffff86\xffffff95\xffffff86\xffffffe3\xffffff88\xffffffb5\xffffff88\xffffffb5\xffffffe6\xffffff9c\xffffffb1\xffffff9c\xffffffb1w
usb 4-1.4: SerialNumber: FF5AE04D9023FD50
usb 4-1.4: USB disconnect, device number 4
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
usb 4-1.4: new high-speed USB device number 5 using ehci_hcd
usb 4-1.4: New USB device found, idVendor=0bdb, idProduct=1911
usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1.4: Product: F5521gw
usb 4-1.4: Manufacturer: Lenovo
usb 4-1.4: SerialNumber: FF5AE04D9023FD50
cdc_acm 4-1.4:1.1: ttyACM0: USB ACM device
cdc_acm 4-1.4:1.3: ttyACM1: USB ACM device
cdc_wdm 4-1.4:1.5: cdc-wdm0: USB WDM device
usb 4-1.4: MAC-Address: 02:80:37:ec:02:00
cdc_ncm 4-1.4:1.6: wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
cdc_wdm 4-1.4:1.8: cdc-wdm1: USB WDM device
cdc_acm 4-1.4:1.9: ttyACM2: USB ACM device
IPv6: ADDRCONF(NETDEV_UP): wwan0: link is not ready
wlan0: authenticate with 24:65:11:11:04:1a
wlan0: send auth to 24:65:11:11:04:1a (try 1/3)
wlan0: authenticated
wlan0: associate with 24:65:11:11:04:1a (try 1/3)
wlan0: RX AssocResp from 24:65:11:11:04:1a (capab=0x31 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
wlan0: deauthenticating from 24:65:11:11:04:1a by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
i915 0000:00:02.0: power state changed by ACPI to D3hot
e1000e 0000:00:19.0: wake-up capability enabled by ACPI
PM: suspend of devices complete after 419.761 msecs
PM: late suspend of devices complete after 0.137 msecs
pcieport 0000:00:1c.6: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
PM: noirq suspend of devices complete after 43.841 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
microcode: CPU0 updated to revision 0x28, date = 2012-04-24
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
microcode: CPU1 updated to revision 0x28, date = 2012-04-24
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
microcode: CPU2 updated to revision 0x28, date = 2012-04-24
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
microcode: CPU3 updated to revision 0x28, date = 2012-04-24
CPU3 is up
ACPI: Waking up from system sleep state S3
i915 0000:00:02.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
pcieport 0000:00:1c.6: wake-up capability disabled by ACPI
PM: noirq resume of devices complete after 99.174 msecs
PM: early resume of devices complete after 0.035 msecs
i915 0000:00:02.0: setting latency timer to 64
e1000e 0000:00:19.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1a.0: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
usb usb2: root hub lost power or was reset
usb usb3: root hub lost power or was reset
xhci_hcd 0000:0e:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 49 for MSI/MSI-X
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
usb 1-1.4: reset full-speed USB device number 3 using ehci_hcd
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
btusb 1-1.4:1.0: no reset_resume for driver btusb?
btusb 1-1.4:1.1: no reset_resume for driver btusb?
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Starting disk
usb 1-1.6: reset high-speed USB device number 4 using ehci_hcd
usb 4-1.4: reset high-speed USB device number 5 using ehci_hcd
usb 4-1.4: device firmware changed
Extended CMOS year: 2000
PM: resume of devices complete after 646.623 msecs
PM: Finishing wakeup.
usb 4-1.4: USB disconnect, device number 5
cdc_ncm 4-1.4:1.6: wwan0: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
usb 4-1.4: new high-speed USB device number 6 using ehci_hcd
usb 4-1.4: New USB device found, idVendor=0bdb, idProduct=1912
usb 4-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=5
usb 4-1.4: Product: \xffffffe3\xffffff95\xffffff86\xffffff95\xffffff86\xffffffe3\xffffff88\xffffffb5\xffffff88\xffffffb5\xffffffe6\xffffff9c\xffffffb1\xffffff9c\xffffffb1w
usb 4-1.4: SerialNumber: FF5AE04D9023FD50
usbhid 4-1.4:1.0: can't add hid device: -71
usbhid: probe of 4-1.4:1.0 failed with error -71
usb 4-1.4: USB disconnect, device number 6
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
usb 4-1.4: new high-speed USB device number 7 using ehci_hcd
usb 4-1.4: New USB device found, idVendor=0bdb, idProduct=1911
usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1.4: Product: F5521gw
usb 4-1.4: Manufacturer: Lenovo
usb 4-1.4: SerialNumber: FF5AE04D9023FD50
cdc_acm 4-1.4:1.1: ttyACM0: USB ACM device
cdc_acm 4-1.4:1.3: ttyACM1: USB ACM device
cdc_wdm 4-1.4:1.5: cdc-wdm0: USB WDM device
usb 4-1.4: MAC-Address: 02:80:37:ec:02:00
cdc_ncm 4-1.4:1.6: wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
cdc_wdm 4-1.4:1.8: cdc-wdm1: USB WDM device
cdc_acm 4-1.4:1.9: ttyACM2: USB ACM device
IPv6: ADDRCONF(NETDEV_UP): wwan0: link is not ready
cdc_ncm: wwan0: network connection: disconnected
wlan0: authenticate with 24:65:11:11:04:1a
wlan0: send auth to 24:65:11:11:04:1a (try 1/3)
wlan0: authenticated
wlan0: associate with 24:65:11:11:04:1a (try 1/3)
wlan0: RX AssocResp from 24:65:11:11:04:1a (capab=0x31 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
wlan0: deauthenticating from 24:65:11:11:04:1a by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
i915 0000:00:02.0: power state changed by ACPI to D3hot
e1000e 0000:00:19.0: wake-up capability enabled by ACPI
PM: suspend of devices complete after 417.709 msecs
PM: late suspend of devices complete after 0.137 msecs
pcieport 0000:00:1c.6: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
PM: noirq suspend of devices complete after 43.874 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
microcode: CPU0 updated to revision 0x28, date = 2012-04-24
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
microcode: CPU1 updated to revision 0x28, date = 2012-04-24
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
microcode: CPU2 updated to revision 0x28, date = 2012-04-24
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
microcode: CPU3 updated to revision 0x28, date = 2012-04-24
CPU3 is up
ACPI: Waking up from system sleep state S3
i915 0000:00:02.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
pcieport 0000:00:1c.6: wake-up capability disabled by ACPI
PM: noirq resume of devices complete after 99.174 msecs
PM: early resume of devices complete after 0.035 msecs
i915 0000:00:02.0: setting latency timer to 64
e1000e 0000:00:19.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
usb usb2: root hub lost power or was reset
usb usb3: root hub lost power or was reset
xhci_hcd 0000:0e:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 49 for MSI/MSI-X
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
usb 1-1.6: reset high-speed USB device number 4 using ehci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
sd 0:0:0:0: [sda] Starting disk
usb 4-1.4: reset high-speed USB device number 7 using ehci_hcd
usb 4-1.4: device firmware changed
usb 1-1.4: reset full-speed USB device number 3 using ehci_hcd
btusb 1-1.4:1.0: no reset_resume for driver btusb?
btusb 1-1.4:1.1: no reset_resume for driver btusb?
Extended CMOS year: 2000
PM: resume of devices complete after 688.225 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
usb 2-1: new low-speed USB device number 2 using xhci_hcd
usb 2-1: New USB device found, idVendor=046d, idProduct=c050
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB-PS/2 Optical Mouse
usb 2-1: Manufacturer: Logitech
usb 2-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 4-1.4: USB disconnect, device number 7
cdc_ncm 4-1.4:1.6: wwan0: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
usb 4-1.4: new high-speed USB device number 8 using ehci_hcd
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1c.6/0000:0e:00.0/usb2/2-1/2-1:1.0/input/input14
hid-generic 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:0e:00.0-1/input0
usb 4-1.4: New USB device found, idVendor=0bdb, idProduct=1912
usb 4-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=5
usb 4-1.4: Product: \xffffffe3\xffffff95\xffffff86\xffffff95\xffffff86\xffffffe3\xffffff88\xffffffb5\xffffff88\xffffffb5\xffffffe6\xffffff9c\xffffffb1\xffffff9c\xffffffb1w
usb 4-1.4: SerialNumber: FF5AE04D9023FD50
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
usbhid 4-1.4:1.0: can't add hid device: -71
usbhid: probe of 4-1.4:1.0 failed with error -71
usb 4-1.4: USB disconnect, device number 8
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
usb 4-1.4: new high-speed USB device number 9 using ehci_hcd
usb 4-1.4: New USB device found, idVendor=0bdb, idProduct=1911
usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1.4: Product: F5521gw
usb 4-1.4: Manufacturer: Lenovo
usb 4-1.4: SerialNumber: FF5AE04D9023FD50
cdc_acm 4-1.4:1.1: ttyACM0: USB ACM device
cdc_acm 4-1.4:1.3: ttyACM1: USB ACM device
cdc_wdm 4-1.4:1.5: cdc-wdm0: USB WDM device
usb 4-1.4: MAC-Address: 02:80:37:ec:02:00
cdc_ncm 4-1.4:1.6: wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
cdc_wdm 4-1.4:1.8: cdc-wdm1: USB WDM device
cdc_acm 4-1.4:1.9: ttyACM2: USB ACM device
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_UP): wwan0: link is not ready
wlan0: authenticate with 20:37:06:7d:44:3d
wlan0: send auth to 20:37:06:7d:44:3d (try 1/3)
wlan0: send auth to 20:37:06:7d:44:3d (try 2/3)
wlan0: authenticated
wlan0: associate with 20:37:06:7d:44:3d (try 1/3)
wlan0: RX AssocResp from 20:37:06:7d:44:3d (capab=0x111 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
wlan0: deauthenticating from 20:37:06:7d:44:3d by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
created IOMMU domain ffff88019ac4f400
EXT4-fs (sda3): Unaligned AIO/DIO on inode 4063465 by VirtualBox; performance will be poor.
mmc0: new SDHC card at address b368
mmcblk0: mmc0:b368 SDC 15.0 GiB
mmcblk0: p1
FAT-fs (mmcblk0p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
mmc0: card b368 removed
[drm:__gen6_gt_force_wake_get] *ERROR* Force wake wait timed out
[drm:__gen6_gt_force_wake_get] *ERROR* Force wake wait timed out
systemd-journal[367]: segfault at 8 ip 0000000000406f61 sp 00007fff22f9d2a0 error 4 in systemd-journald[400000+21000]
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
i915 0000:00:02.0: power state changed by ACPI to D3hot
e1000e 0000:00:19.0: wake-up capability enabled by ACPI
PM: suspend of devices complete after 422.794 msecs
PM: late suspend of devices complete after 0.141 msecs
pcieport 0000:00:1c.6: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
PM: noirq suspend of devices complete after 43.790 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
microcode: CPU0 updated to revision 0x28, date = 2012-04-24
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
Disabled fast string operations
microcode: CPU1 updated to revision 0x28, date = 2012-04-24
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
Disabled fast string operations
microcode: CPU2 updated to revision 0x28, date = 2012-04-24
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
Disabled fast string operations
microcode: CPU3 updated to revision 0x28, date = 2012-04-24
CPU3 is up
ACPI: Waking up from system sleep state S3
i915 0000:00:02.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
pcieport 0000:00:1c.6: wake-up capability disabled by ACPI
PM: noirq resume of devices complete after 99.175 msecs
PM: early resume of devices complete after 0.035 msecs
e1000e 0000:00:19.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
usb usb2: root hub lost power or was reset
usb usb3: root hub lost power or was reset
xhci_hcd 0000:0e:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:0e:00.0: irq 49 for MSI/MSI-X
i915 0000:00:02.0: setting latency timer to 64
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
usb 1-1.4: reset full-speed USB device number 3 using ehci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata2: SATA link down (SStatus 0 SControl 300)
ata1.00: configured for UDMA/133
ata5: SATA link down (SStatus 0 SControl 300)
sd 0:0:0:0: [sda] Starting disk
btusb 1-1.4:1.0: no reset_resume for driver btusb?
btusb 1-1.4:1.1: no reset_resume for driver btusb?
usb 4-1.4: reset high-speed USB device number 9 using ehci_hcd
usb 4-1.4: device firmware changed
usb 1-1.6: reset high-speed USB device number 4 using ehci_hcd
Extended CMOS year: 2000
usb 2-1: reset low-speed USB device number 2 using xhci_hcd
usb 2-1: device firmware changed
PM: resume of devices complete after 909.265 msecs
PM: Finishing wakeup.
usb 4-1.4: USB disconnect, device number 9
cdc_ncm 4-1.4:1.6: wwan0: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
usb 4-1.4: new high-speed USB device number 10 using ehci_hcd
usb 4-1.4: New USB device found, idVendor=0bdb, idProduct=1912
usb 4-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=5
usb 4-1.4: Product: \xffffffe3\xffffff95\xffffff86\xffffff95\xffffff86\xffffffe3\xffffff88\xffffffb5\xffffff88\xffffffb5\xffffffe6\xffffff9c\xffffffb1\xffffff9c\xffffffb1w
usb 4-1.4: SerialNumber: FF5AE04D9023FD50
usbhid 4-1.4:1.0: can't add hid device: -71
usbhid: probe of 4-1.4:1.0 failed with error -71
usb 2-1: USB disconnect, device number 2
xhci_hcd 0000:0e:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802106e1e00
usb 2-1: new low-speed USB device number 3 using xhci_hcd
usb 2-1: New USB device found, idVendor=046d, idProduct=c03e
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB-PS/2 Optical Mouse
usb 2-1: Manufacturer: Logitech
usb 2-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1c.6/0000:0e:00.0/usb2/2-1/2-1:1.0/input/input15
hid-generic 0003:046D:C03E.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:0e:00.0-1/input0
usb 4-1.4: USB disconnect, device number 10
e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
usb 4-1.4: new high-speed USB device number 11 using ehci_hcd
usb 4-1.4: New USB device found, idVendor=0bdb, idProduct=1911
usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1.4: Product: F5521gw
usb 4-1.4: Manufacturer: Lenovo
usb 4-1.4: SerialNumber: FF5AE04D9023FD50
cdc_acm 4-1.4:1.1: ttyACM0: USB ACM device
cdc_acm 4-1.4:1.3: ttyACM1: USB ACM device
cdc_wdm 4-1.4:1.5: cdc-wdm0: USB WDM device
usb 4-1.4: MAC-Address: 02:80:37:ec:02:00
cdc_ncm 4-1.4:1.6: wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
cdc_wdm 4-1.4:1.8: cdc-wdm1: USB WDM device
cdc_acm 4-1.4:1.9: ttyACM2: USB ACM device
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 24:65:11:11:04:1a
wlan0: send auth to 24:65:11:11:04:1a (try 1/3)
wlan0: authenticated
wlan0: associate with 24:65:11:11:04:1a (try 1/3)
wlan0: RX AssocResp from 24:65:11:11:04:1a (capab=0x31 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
hda-intel: Unstable LPIB (65508 >= 32768); disabling LPIB delay counting