dmesg - tes11
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-26-generic (buildd@lamiak) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #42-Ubuntu SMP Fri Mar 8 23:18:20 UTC 2013 (Ubuntu 3.5.0-26.42-generic 3.5.7.6)
Command line: BOOT_IMAGE=/vmlinuz-3.5.0-26-generic root=/dev/mapper/ubuntu-root ro quiet splash
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000943ff] usable
BIOS-e820: [mem 0x0000000000094400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dedf1fff] usable
BIOS-e820: [mem 0x00000000dedf2000-0x00000000dee34fff] ACPI NVS
BIOS-e820: [mem 0x00000000dee35000-0x00000000defadfff] usable
BIOS-e820: [mem 0x00000000defae000-0x00000000df166fff] reserved
BIOS-e820: [mem 0x00000000df167000-0x00000000df3c5fff] usable
BIOS-e820: [mem 0x00000000df3c6000-0x00000000df567fff] reserved
BIOS-e820: [mem 0x00000000df568000-0x00000000df7bcfff] ACPI NVS
BIOS-e820: [mem 0x00000000df7bd000-0x00000000df7ccfff] ACPI data
BIOS-e820: [mem 0x00000000df7cd000-0x00000000df7e7fff] ACPI NVS
BIOS-e820: [mem 0x00000000df7e8000-0x00000000df7fffff] ACPI data
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041f7fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Micro-Star International Co., Ltd. GT680R/GX680R/GT683R/GT683DXR/GX660DXR/MS-16F2, BIOS E16F2IMS V3.0S 08/17/2011
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x41f800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D7FFF write-protect
D8000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask C00000000 write-back
1 base 400000000 mask FE0000000 write-back
2 base 0E0000000 mask FE0000000 uncachable
3 base 41F800000 mask FFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 512MB, type WB
reg 2, base: 3584MB, range: 512MB, type UC
reg 3, base: 16888MB, range: 8MB, type UC
total RAM covered: 16376M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 512MB, type WB
reg 6, base: 16888MB, range: 8MB, type UC
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf3c6 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fce80-0x000fce8f] mapped at [ffff8800000fce80]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff88000008e000] 8e000 size 24576
init_memory_mapping: [mem 0x00000000-0xdf3c5fff]
[mem 0x00000000-0xdf1fffff] page 2M
[mem 0xdf200000-0xdf3c5fff] page 4k
kernel direct mapping tables up to 0xdf3c5fff @ [mem 0x1fffa000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x41f7fffff]
[mem 0x100000000-0x41f7fffff] page 2M
kernel direct mapping tables up to 0x41f7fffff @ [mem 0xdf3b8000-0xdf3c5fff]
RAMDISK: [mem 0x360f8000-0x37073fff]
ACPI: RSDP 00000000000f0450 00024 (v02 MSI_NB)
ACPI: XSDT 00000000df7bd078 0006C (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: FACP 00000000df7c9778 000F4 (v04 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: DSDT 00000000df7bd170 0C602 (v02 MSI_NB MEGABOOK 00000014 INTL 20051117)
ACPI: FACS 00000000df7dff80 00040
ACPI: APIC 00000000df7c9870 00092 (v03 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: MCFG 00000000df7c9908 0003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
ACPI: SSDT 00000000df7c9948 0112E (v01 TrmRef PtidDevc 00001000 INTL 20091112)
ACPI: SLIC 00000000df7caa78 00176 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: HPET 00000000df7cabf0 00038 (v01 MSI_NB MEGABOOK 01072009 AMI. 00000004)
ACPI: SSDT 00000000df7cac28 00968 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000df7cb590 00996 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: ECDT 00000000df7cbf28 000C1 (v01 MSI_NB MEGABOOK 01072009 AMI. 00000004)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041f7fffff]
Initmem setup node 0 [mem 0x00000000-0x41f7fffff]
NODE_DATA [mem 0x41f7fc000-0x41f7fffff]
[ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040ee00000-ffff88041edfffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x41f7fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x00093fff]
node 0: [mem 0x00100000-0xdedf1fff]
node 0: [mem 0xdee35000-0xdefadfff]
node 0: [mem 0xdf167000-0xdf3c5fff]
node 0: [mem 0x100000000-0x41f7fffff]
On node 0 totalpages: 4188494
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3902 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 893450 pages, LIFO batch:31
Normal zone: 51168 pages used for memmap
Normal zone: 3223584 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 0000000000094000 - 0000000000095000
PM: Registered nosave memory: 0000000000095000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000dedf2000 - 00000000dee35000
PM: Registered nosave memory: 00000000defae000 - 00000000df167000
PM: Registered nosave memory: 00000000df3c6000 - 00000000df568000
PM: Registered nosave memory: 00000000df568000 - 00000000df7bd000
PM: Registered nosave memory: 00000000df7bd000 - 00000000df7cd000
PM: Registered nosave memory: 00000000df7cd000 - 00000000df7e8000
PM: Registered nosave memory: 00000000df7e8000 - 00000000df800000
PM: Registered nosave memory: 00000000df800000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88041f400000 s83584 r8192 d22912 u262144
pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4120936
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.5.0-26-generic root=/dev/mapper/ubuntu-root ro quiet splash
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16393116k/17293312k available (6708k kernel code, 539336k absent, 360860k reserved, 6458k data, 932k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:744 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2194.899 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.79 BogoMIPS (lpj=8779596)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 25098 entries in 99 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz stepping 07
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (35118.38 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xdedf2000-0xdee34fff] (274432 bytes)
PM: Registering ACPI NVS region [mem 0xdf568000-0xdf7bcfff] (2445312 bytes)
PM: Registering ACPI NVS region [mem 0xdf7cd000-0xdf7e7fff] (110592 bytes)
dummy:
RTC time: 15:18:31, date: 04/08/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Detected MSI hardware, enabling workarounds.
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000df541718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000df542a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000df540d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xf630a000-0xf630a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xf6308000-0xf63083ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf6300000-0xf6303fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xf6307000-0xf63073ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100
pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 24: [mem 0xf6306000-0xf63067ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf6305000-0xf63050ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:1210] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xf4000000-0xf5ffffff]
pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xe7ffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xe8000000-0xebffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 30: [mem 0xf6000000-0xf607ffff pref]
pci 0000:01:00.1: [10de:0e0c] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xf6080000-0xf6083fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf60fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xebffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 18: [mem 0xec104000-0xec104fff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0xec100000-0xec103fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xec100000-0xec1fffff 64bit pref]
pci 0000:03:00.0: [8086:0896] type 00 class 0x028000
pci 0000:03:00.0: reg 10: [mem 0xf6200000-0xf6201fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 03-03]
pci 0000:00:1c.2: bridge window [mem 0xf6200000-0xf62fffff]
pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:04:00.0: reg 10: [mem 0xf6100000-0xf6101fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 04-04]
pci 0000:00:1c.3: bridge window [mem 0xf6100000-0xf61fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00094400-0x0009ffff]
e820: reserve RAM buffer [mem 0xdedf2000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdefae000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf3c6000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f800000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3e]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0xe0000000-0xfeafffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0000-0x001f]
pnp 00:01: [io 0x0081-0x0091]
pnp 00:01: [io 0x0093-0x009f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [mem 0xff000000-0xffffffff]
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io 0x002e-0x002f]
pnp 00:04: [io 0x004e-0x004f]
pnp 00:04: [io 0x0061]
pnp 00:04: [io 0x0063]
pnp 00:04: [io 0x0065]
pnp 00:04: [io 0x0067]
pnp 00:04: [io 0x0070]
pnp 00:04: [io 0x0080]
pnp 00:04: [io 0x0092]
pnp 00:04: [io 0x00b2-0x00b3]
pnp 00:04: [io 0x0680-0x069f]
pnp 00:04: [io 0x1000-0x100f]
pnp 00:04: [io 0x1100-0x110f]
pnp 00:04: [io 0xffff]
pnp 00:04: [io 0x0400-0x0453]
pnp 00:04: [io 0x0458-0x047f]
pnp 00:04: [io 0x0500-0x057f]
pnp 00:04: [io 0x164e-0x164f]
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x1000-0x100f] has been reserved
system 00:04: [io 0x1100-0x110f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x0453] has been reserved
system 00:04: [io 0x0458-0x047f] has been reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [io 0x0070-0x0077]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0454-0x0457]
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:07: [io 0x0680-0x068f]
pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:07: [io 0x0a10-0x0a1f]
system 00:07: [io 0x0680-0x068f] has been reserved
system 00:07: [io 0x0a10-0x0a1f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x0010-0x001f]
pnp 00:08: [io 0x0022-0x003f]
pnp 00:08: [io 0x0044-0x005f]
pnp 00:08: [io 0x0072-0x007f]
pnp 00:08: [io 0x0080]
pnp 00:08: [io 0x0084-0x0086]
pnp 00:08: [io 0x0088]
pnp 00:08: [io 0x008c-0x008e]
pnp 00:08: [io 0x0090-0x009f]
pnp 00:08: [io 0x00a2-0x00bf]
pnp 00:08: [io 0x00e0-0x00ef]
pnp 00:08: [io 0x04d0-0x04d1]
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x00f0-0x00ff]
pnp 00:09: [irq 13]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0a: [io 0x0060]
pnp 00:0a: [io 0x0064]
pnp 00:0a: [irq 1]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0b: [irq 12]
pnp 00:0b: Plug and Play ACPI device, IDs STLc003 PNP0f13 PNP0f03 SYN1507 (active)
pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0c: [mem 0xfed10000-0xfed17fff]
pnp 00:0c: [mem 0xfed18000-0xfed18fff]
pnp 00:0c: [mem 0xfed19000-0xfed19fff]
pnp 00:0c: [mem 0xf8000000-0xfbffffff]
pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
pnp 00:0c: [mem 0xfed90000-0xfed93fff]
pnp 00:0c: [mem 0xfed45000-0xfed8ffff]
pnp 00:0c: [mem 0xff000000-0xffffffff]
pnp 00:0c: [mem 0xfee00000-0xfeefffff]
pnp 00:0c: [mem 0xec200000-0xec200fff]
system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0c: [mem 0xec200000-0xec200fff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
ACPI Error: Invalid/unsupported resource descriptor: Type 0x00 (20120320/utresrc-650)
pnp 00:0d: can't evaluate _CRS: 12311
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf60fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xebffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xec100000-0xec1fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 03-03]
pci 0000:00:1c.2: bridge window [mem 0xf6200000-0xf62fffff]
pci 0000:00:1c.3: PCI bridge to [bus 04-04]
pci 0000:00:1c.3: bridge window [mem 0xf6100000-0xf61fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 8 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 10 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 11 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf60fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xebffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 2 [mem 0xec100000-0xec1fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf6200000-0xf62fffff]
pci_bus 0000:04: resource 1 [mem 0xf6100000-0xf61fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
Freeing initrd memory: 15856k freed
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdadf2000-0xdedf1fff] (64MB) mapped at [ffff8800dadf2000-ffff8800dedf1fff]
audit: initializing netlink socket (disabled)
type=2000 audit(1365434311.664:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 32048
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/PNP0C09:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [THRM] (55 C)
ACPI: Battery Slot [BAT1] (battery absent)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
ACPI: Battery Slot [BAT1] (battery absent)
loop: module loaded
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf6308000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.5.0-26-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf6307000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.5.0-26-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:04:00.0: irq 19, io mem 0xf6100000
xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 51 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.5.0-26-generic xhci_hcd
usb usb3: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.5.0-26-generic xhci_hcd
usb usb4: SerialNumber: 0000:04:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 9:449:335
tty tty56: hash matches
rtc_cmos 00:05: setting system clock to 2013-04-08 15:18:32 UTC (1365434312)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 932k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1472k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Freeing unused kernel memory: 1136k freed
udevd[116]: starting version 175
xor: automatically using best checksumming function:
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: irq 52 for MSI/MSI-X
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 53 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
r8169 0000:02:00.0: eth0: RTL8168e/8111e at 0xffffc900065e8000, 6c:62:6d:32:0c:bd, XID 0c200000 IRQ 52
r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xf impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
avx : 16865.000 MB/sec
device-mapper: dm-raid45: initialized v0.2594b
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf6306000 port 0xf6306100 irq 53
ata2: SATA max UDMA/133 abar m2048@0xf6306000 port 0xf6306180 irq 53
ata3: SATA max UDMA/133 abar m2048@0xf6306000 port 0xf6306200 irq 53
ata4: SATA max UDMA/133 abar m2048@0xf6306000 port 0xf6306280 irq 53
ata5: DUMMY
ata6: DUMMY
usb 1-1: new high-speed USB device number 2 using ehci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD5000BPKT-22PK4T0, 01.01A01, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD5000BPKT-2 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
sda: sda1 sda2
sda: p2 size 1953327104 extends beyond EOD, enabling native capacity
sda: sda1 sda2
sda: p2 size 1953327104 extends beyond EOD, truncated
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-1: new high-speed USB device number 2 using ehci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
usb 1-1.5: new full-speed USB device number 3 using ehci_hcd
ata2.00: ATA-8: WDC WD5000BPKT-22PK4T0, 01.01A01, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD5000BPKT-2 01.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: Attached scsi generic sg1 type 0
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 1-1.5: New USB device found, idVendor=046d, idProduct=c246
usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.5: Product: Gaming Mouse G300
usb 1-1.5: Manufacturer: Logitech
Refined TSC clocksource calibration: 2195.012 MHz.
Switching to clocksource tsc
usb 2-1.2: new high-speed USB device number 3 using ehci_hcd
usb 2-1.2: New USB device found, idVendor=0bda, idProduct=0139
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.2: Product: USB2.0-CRW
usb 2-1.2: Manufacturer: Generic
usb 2-1.2: SerialNumber: 20100201396000000
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: TSSTcorp CDDVDW TS-L633F, TM01, max UDMA/100
ata3.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633F TM01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg2 type 5
usb 2-1.7: new full-speed USB device number 4 using ehci_hcd
usb 2-1.7: New USB device found, idVendor=1770, idProduct=ff00
usb 2-1.7: New USB device strings: Mfr=1, Product=1, SerialNumber=1
usb 2-1.7: Product: MSI EPF USB
usb 2-1.7: Manufacturer: MSI EPF USB
usb 2-1.7: SerialNumber: MSI EPF USB
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATA-8: ST9250315AS, 0002CE02, max UDMA/133
ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA ST9250315AS 0002 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2 < sdc5 >
sd 3:0:0:0: [sdc] Attached SCSI disk
input: Logitech Gaming Mouse G300 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input4
hid-generic 0003:046D:C246.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Gaming Mouse G300] on usb-0000:00:1a.0-1.5/input0
input: Logitech Gaming Mouse G300 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/input/input5
hid-generic 0003:046D:C246.0002: input,hiddev0,hidraw1: USB HID v1.10 Keyboard [Logitech Gaming Mouse G300] on usb-0000:00:1a.0-1.5/input1
hid-generic 0003:1770:FF00.0003: timeout initializing reports
hid-generic 0003:1770:FF00.0003: hiddev0,hidraw2: USB HID v1.10 Device [MSI EPF USB MSI EPF USB] on usb-0000:00:1d.0-1.7/input0
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
Adding 16752636k swap on /dev/mapper/ubuntu-swap_1. Priority:-1 extents:1 across:16752636k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[604]: starting version 175
type=1400 audit(1365427136.249:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=831 comm="apparmor_parser"
type=1400 audit(1365427136.249:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=830 comm="apparmor_parser"
type=1400 audit(1365427136.249:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=831 comm="apparmor_parser"
type=1400 audit(1365427136.249:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=830 comm="apparmor_parser"
type=1400 audit(1365427136.249:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=831 comm="apparmor_parser"
type=1400 audit(1365427136.249:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=830 comm="apparmor_parser"
rts5139: module is from the staging directory, the quality is unknown, you have been warned.
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a
device-mapper: multipath: version 1.4.0 loaded
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
lp: driver loaded but no devices found
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 54 for MSI/MSI-X
cfg80211: Calling CRDA to update world regulatory domain
scsi6 : SCSI emulation for RTS5139 USB card reader
scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: Attached scsi generic sg4 type 0
usbcore: registered new interface driver rts5139
sd 6:0:0:0: [sdd] Attached SCSI removable disk
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 310.14 Tue Oct 9 11:52:41 PDT 2012
iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
iwlwifi: Copyright(c) 2003-2012 Intel Corporation
iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
iwlwifi 0000:03:00.0: pci_resource_base = ffffc9000668c000
iwlwifi 0000:03:00.0: HW Revision ID = 0x34
iwlwifi 0000:03:00.0: irq 55 for MSI/MSI-X
ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
wmi: Mapper loaded
mei 0000:00:16.0: wd: failed to find the client
acpi device:1f: registered as cooling_device13
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1d/LNXVIDEO:00/input/input6
snd_hda_intel 0000:00:1b.0: irq 56 for MSI/MSI-X
hda_codec: ALC892: SKU not ready 0x598301f0
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
hda_intel: Disabling MSI
hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a
iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 130 BGN, REV=0xB0
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x1a
microcode: Microcode Update Driver: v2.00 , Peter Oruba
iwlwifi 0000:03:00.0: device EEPROM VER=0x716, CALIB=0x6
iwlwifi 0000:03:00.0: Device SKU: 0x150
iwlwifi 0000:03:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3
iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
Registered led device: phy0-led
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
psmouse serio1: sentelic: Finger Sensing Pad, hw: 13.2.1, sn: 0, sw: 1.1.0-K
EXT4-fs (dm-3): re-mounted. Opts: errors=remount-ro
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio1/input/input15
init: failsafe main process (1360) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1365427138.629:8): apparmor="STATUS" operation="profile_load" name="system_tor" pid=1453 comm="apparmor_parser"
type=1400 audit(1365427138.629:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1452 comm="apparmor_parser"
type=1400 audit(1365427138.629:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/vidalia" pid=1456 comm="apparmor_parser"
type=1400 audit(1365427138.629:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1450 comm="apparmor_parser"
init: avahi-cups-reload main process (1487) terminated with status 1
ppdev: user-space parallel port driver
r8169 0000:02:00.0: eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with f4:ca:e5:e0:17:68
wlan0: send auth to f4:ca:e5:e0:17:68 (try 1/3)
wlan0: authenticated
wlan0: associate with f4:ca:e5:e0:17:68 (try 1/3)
wlan0: RX AssocResp from f4:ca:e5:e0:17:68 (capab=0x411 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
init: udev-fallback-graphics main process (1764) terminated with status 1
NVRM: GPU at 0000:01:00: GPU-c6dc1098-66e1-c9eb-cd3b-2bc53552fbce
show_signal_msg: 63 callbacks suppressed
pool[2933]: segfault at 45 ip 00007f111ebe3107 sp 00007f1119fb2820 error 4 in libdbus-1.so.3.7.2[7f111ebdc000+43000]
ACPI Warning: 0x000000000000f000-0x000000000000f01f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
i2c /dev entries driver
atkbd serio0: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e008 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0x88 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e008 ' to make it known.