dmesg - Q6600-pts-complex
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-26-generic (buildd@lamiak) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #42-Ubuntu SMP Fri Mar 8 23:18:20 UTC 2013 (Ubuntu 3.5.0-26.42-generic 3.5.7.6)
Command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-26-generic root=/dev/mapper/vg1-rootubuntu ro quiet splash vt.handoff=7
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cff7ffff] usable
BIOS-e820: [mem 0x00000000cff80000-0x00000000cff8dfff] ACPI data
BIOS-e820: [mem 0x00000000cff8e000-0x00000000cffdffff] ACPI NVS
BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: System manufacturer P5K-E/P5K-E, BIOS 1305 06/19/2009
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0D0000000 mask FF0000000 uncachable
1 base 0E0000000 mask FE0000000 uncachable
2 base 000000000 mask F00000000 write-back
3 base 100000000 mask FE0000000 write-back
4 base 120000000 mask FF0000000 write-back
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 3328MB, range: 256MB, type UC
reg 1, base: 3584MB, range: 512MB, type UC
reg 2, base: 0GB, range: 4GB, type WB
reg 3, base: 4GB, range: 512MB, type WB
reg 4, base: 4608MB, range: 256MB, type WB
total RAM covered: 4096M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 4GB, range: 512MB, type WB
reg 4, base: 4608MB, range: 256MB, type WB
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcff80 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0xcff7ffff]
[mem 0x00000000-0xcfdfffff] page 2M
[mem 0xcfe00000-0xcff7ffff] page 4k
kernel direct mapping tables up to 0xcff7ffff @ [mem 0x1fffa000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x12fffffff]
[mem 0x100000000-0x12fffffff] page 2M
kernel direct mapping tables up to 0x12fffffff @ [mem 0xcff7e000-0xcff7ffff]
RAMDISK: [mem 0x36192000-0x370c0fff]
ACPI: RSDP 00000000000fbb20 00014 (v00 ACPIAM)
ACPI: RSDT 00000000cff80000 0003C (v01 A_M_I_ OEMRSDT 06000919 MSFT 00000097)
ACPI: FACP 00000000cff80200 00084 (v02 A_M_I_ OEMFACP 06000919 MSFT 00000097)
ACPI: DSDT 00000000cff805c0 0911A (v01 A0812 A0812001 00000001 INTL 20060113)
ACPI: FACS 00000000cff8e000 00040
ACPI: APIC 00000000cff80390 0006C (v01 A_M_I_ OEMAPIC 06000919 MSFT 00000097)
ACPI: MCFG 00000000cff80400 0003C (v01 A_M_I_ OEMMCFG 06000919 MSFT 00000097)
ACPI: OEMB 00000000cff8e040 00081 (v01 A_M_I_ AMI_OEM 06000919 MSFT 00000097)
ACPI: HPET 00000000cff896e0 00038 (v01 A_M_I_ OEMHPET 06000919 MSFT 00000097)
ACPI: OSFR 00000000cff89720 000B0 (v01 A_M_I_ OEMOSFR 06000919 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
Initmem setup node 0 [mem 0x00000000-0x12fffffff]
NODE_DATA [mem 0x12fffc000-0x12fffffff]
[ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x12fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009dfff]
node 0: [mem 0x00100000-0xcff7ffff]
node 0: [mem 0x100000000-0x12fffffff]
On node 0 totalpages: 1048334
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3912 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 831424 pages, LIFO batch:31
Normal zone: 3072 pages used for memmap
Normal zone: 193536 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000
PM: Registered nosave memory: 00000000cff8e000 - 00000000cffe0000
PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s83584 r8192 d22912 u524288
pcpu-alloc: s83584 r8192 d22912 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028872
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-26-generic root=/dev/mapper/vg1-rootubuntu ro quiet splash vt.handoff=7
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 4029896k/4980736k available (6708k kernel code, 787400k absent, 163440k reserved, 6458k data, 932k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:712 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2405.663 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4811.32 BogoMIPS (lpj=9622652)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 25098 entries in 99 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 #2 #3 Ok.
Brought up 4 CPUs
Total of 4 processors activated (19245.30 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcff8e000-0xcffdffff] (335872 bytes)
dummy:
RTC time: 15:46:38, date: 04/05/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000cff8e0d0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
ACPI: SSDT 00000000cff8e2b0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
ACPI: SSDT 00000000cff8e400 00143 (v01 AMI CPU3PM 00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00143 (v01 AMI CPU3PM 00000001 INTL 20060113)
ACPI: SSDT 00000000cff8e550 00143 (v01 AMI CPU4PM 00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00143 (v01 AMI CPU4PM 00000001 INTL 20060113)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xffffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 20: [io 0xb800-0xb81f]
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 20: [io 0xb880-0xb89f]
pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 20: [io 0xbc00-0xbc1f]
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io 0xb080-0xb09f]
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io 0xb400-0xb41f]
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io 0xb480-0xb49f]
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0xac00-0xac07]
pci 0000:00:1f.2: reg 14: [io 0xa880-0xa883]
pci 0000:00:1f.2: reg 18: [io 0xa800-0xa807]
pci 0000:00:1f.2: reg 1c: [io 0xa480-0xa483]
pci 0000:00:1f.2: reg 20: [io 0xa400-0xa41f]
pci 0000:00:1f.2: reg 24: [mem 0xf9ffe800-0xf9ffefff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf9fff400-0xf9fff4ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:01:00.0: [10de:0600] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
pci 0000:01:00.0: reg 24: [io 0xcc00-0xcc7f]
pci 0000:01:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe9fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04-04]
pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
pci 0000:03:00.0: [197b:2363] type 00 class 0x010601
pci 0000:03:00.0: reg 24: [mem 0xfebfe000-0xfebfffff]
pci 0000:03:00.0: reg 30: [mem 0xfebe0000-0xfebeffff pref]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
pci 0000:03:00.1: reg 10: [io 0xec00-0xec07]
pci 0000:03:00.1: reg 14: [io 0xe880-0xe883]
pci 0000:03:00.1: reg 18: [io 0xe800-0xe807]
pci 0000:03:00.1: reg 1c: [io 0xe480-0xe483]
pci 0000:03:00.1: reg 20: [io 0xe400-0xe40f]
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:02:00.0: [11ab:4364] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [mem 0xfeafc000-0xfeafffff 64bit]
pci 0000:02:00.0: reg 18: [io 0xd800-0xd8ff]
pci 0000:02:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 02-02]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0xcff80000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0xd0000000-0xffffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed14000-0xfed19fff]
system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x0083]
pnp 00:02: [io 0x0087]
pnp 00:02: [io 0x0089-0x008b]
pnp 00:02: [io 0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:06: [io 0x0290-0x0297]
system 00:06: [io 0x0290-0x0297] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io 0x0010-0x001f]
pnp 00:07: [io 0x0022-0x003f]
pnp 00:07: [io 0x0044-0x004d]
pnp 00:07: [io 0x0050-0x005f]
pnp 00:07: [io 0x0062-0x0063]
pnp 00:07: [io 0x0065-0x006f]
pnp 00:07: [io 0x0072-0x007f]
pnp 00:07: [io 0x0080]
pnp 00:07: [io 0x0084-0x0086]
pnp 00:07: [io 0x0088]
pnp 00:07: [io 0x008c-0x008e]
pnp 00:07: [io 0x0090-0x009f]
pnp 00:07: [io 0x00a2-0x00bf]
pnp 00:07: [io 0x00e0-0x00ef]
pnp 00:07: [io 0x04d0-0x04d1]
pnp 00:07: [io 0x0800-0x087f]
pnp 00:07: [io 0x0400-0x03ff disabled]
pnp 00:07: [io 0x0480-0x04bf]
pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
pnp 00:07: [mem 0xfed20000-0xfed3ffff]
pnp 00:07: [mem 0xfed50000-0xfed8ffff]
pnp 00:07: [mem 0xffa00000-0xffafffff]
pnp 00:07: [mem 0xffb00000-0xffbfffff]
pnp 00:07: [mem 0xffe00000-0xffefffff]
pnp 00:07: [mem 0xfff00000-0xfffffffe]
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x0800-0x087f] has been reserved
system 00:07: [io 0x0480-0x04bf] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
system 00:07: [mem 0xffa00000-0xffafffff] has been reserved
system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:07: [mem 0xffe00000-0xffefffff] has been reserved
system 00:07: [mem 0xfff00000-0xfffffffe] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [mem 0xfed00000-0xfed003ff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:09: [mem 0xfec00000-0xfec00fff]
pnp 00:09: [mem 0xfee00000-0xfee00fff]
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io 0x0060]
pnp 00:0a: [io 0x0064]
pnp 00:0a: [irq 1]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0b: [mem 0xe0000000-0xefffffff]
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0x00000000-0x0009ffff]
pnp 00:0c: [mem 0x000c0000-0x000cffff]
pnp 00:0c: [mem 0x000e0000-0x000fffff]
pnp 00:0c: [mem 0x00100000-0xcfffffff]
pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0c: [mem 0x00100000-0xcfffffff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04-04] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04-04] add_size 400000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe9fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04-04]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 02-02]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.5: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.0: enabling device (0106 -> 0107)
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe9fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf03fffff]
pci_bus 0000:04: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:02: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:05: resource 8 [mem 0xd0000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcbf7e000-0xcff7dfff] (64MB) mapped at [ffff8800cbf7e000-ffff8800cff7dfff]
audit: initializing netlink socket (disabled)
type=2000 audit(1365176798.212:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 7870
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
Freeing initrd memory: 15548k freed
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
pata_acpi 0000:03:00.1: setting latency timer to 64
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.5.0-26-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.5.0-26-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.5.0-26-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.5.0-26-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.5.0-26-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.5.0-26-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.5.0-26-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.5.0-26-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 9:189:790
rtc_cmos 00:03: setting system clock to 2013-04-05 15:46:38 UTC (1365176798)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 932k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1472k freed
Freeing unused kernel memory: 1136k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
udevd[98]: starting version 175
pata_jmicron 0000:03:00.1: setting latency timer to 64
scsi0 : pata_jmicron
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi1 : pata_jmicron
ata1: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 17
ata2: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 17
sky2: driver version 1.30
sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2
sky2 0000:02:00.0: irq 45 for MSI/MSI-X
sky2 0000:02:00.0: eth0: addr 00:1d:60:5e:90:5a
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffe900 irq 44
ata4: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffe980 irq 44
ata5: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffea00 irq 44
ata6: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffea80 irq 44
ata7: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffeb00 irq 44
ata8: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffeb80 irq 44
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m8192@0xfebfe000 port 0xfebfe100 irq 16
ata10: SATA max UDMA/133 abar m8192@0xfebfe000 port 0xfebfe180 irq 16
ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H20L, 1.02, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H20L 1.02 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
usb 1-3: new high-speed USB device number 2 using ehci_hcd
ata3: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
usb 1-3: New USB device found, idVendor=0bda, idProduct=8187
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: RTL8187_Wireless
usb 1-3: Manufacturer: Manufacturer_Realtek_RTL8187_
usb 1-3: SerialNumber: 0015AF29541C
usb 8-1: new low-speed USB device number 2 using uhci_hcd
ata4: SATA link down (SStatus 0 SControl 300)
Refined TSC clocksource calibration: 2405.454 MHz.
Switching to clocksource tsc
usb 8-1: New USB device found, idVendor=03f0, idProduct=8607
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1: Product: HP Mobile USB Optical Mouse
usb 8-1: Manufacturer: PixArt
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
ata7.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata7.00: configured for UDMA/133
scsi 6:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
sd 6:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda4 < sda5 >
sd 6:0:0:0: [sda] Attached SCSI disk
ata8: SATA link down (SStatus 0 SControl 300)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: PixArt HP Mobile USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input3
hid-generic 0003:03F0:8607.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt HP Mobile USB Optical Mouse] on usb-0000:00:1d.2-1/input0
EXT4-fs (dm-3): INFO: recovery required on readonly filesystem
EXT4-fs (dm-3): write access will be enabled during recovery
EXT4-fs (dm-3): recovery complete
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
Adding 1048572k swap on /dev/mapper/vg1-swap01. Priority:-1 extents:1 across:1048572k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[368]: starting version 175
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
lp: driver loaded but no devices found
[drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x092000a2)
ACPI Warning: 0x0000000000000830-0x0000000000000833 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SMIE 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
cfg80211: Calling CRDA to update world regulatory domain
type=1400 audit(1365169608.212:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=470 comm="apparmor_parser"
type=1400 audit(1365169608.212:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=470 comm="apparmor_parser"
EXT4-fs (dm-3): re-mounted. Opts: errors=remount-ro
type=1400 audit(1365169608.212:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=470 comm="apparmor_parser"
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[drm] nouveau 0000:01:00.0: BIT BIOS found
[drm] nouveau 0000:01:00.0: Bios version 62.92.16.00
[drm] nouveau 0000:01:00.0: TMDS table version 2.0
[drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[drm] nouveau 0000:01:00.0: DCB version 4.0
[drm] nouveau 0000:01:00.0: DCB outp 00: 02000300 00000028
[drm] nouveau 0000:01:00.0: DCB outp 01: 01000302 00000030
[drm] nouveau 0000:01:00.0: DCB outp 02: 04011310 00000028
[drm] nouveau 0000:01:00.0: DCB outp 03: 02011312 00000030
[drm] nouveau 0000:01:00.0: DCB outp 04: 010223f1 00c0c080
[drm] nouveau 0000:01:00.0: DCB conn 00: 00001030
[drm] nouveau 0000:01:00.0: DCB conn 01: 00002130
[drm] nouveau 0000:01:00.0: DCB conn 02: 00000210
[drm] nouveau 0000:01:00.0: DCB conn 03: 00000211
[drm] nouveau 0000:01:00.0: DCB conn 04: 00000213
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC0C3
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC47D
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD1EB
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD2EA
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD51A
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD57F
microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xb6
[drm] nouveau 0000:01:00.0: 0xD57F: Condition still not met after 20ms, skipping following opcodes
[TTM] Zone kernel: Available graphics memory: 2024492 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] nouveau 0000:01:00.0: Detected 512MiB VRAM (GDDR3)
[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
adt7475 2-002e: ADT7473 device, revision 1
[drm] nouveau 0000:01:00.0: Detected monitoring device: adt7473
[drm] nouveau 0000:01:00.0: 1 available performance level(s)
[drm] nouveau 0000:01:00.0: 3: core 650MHz shader 1625MHz memory 972MHz voltage 1150mV fanspeed 100%
[drm] nouveau 0000:01:00.0: c: core 399MHz shader 810MHz memory 499MHz voltage 1150mV
snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[drm] nouveau 0000:01:00.0: MM: using CRYPT for buffer copies
init: failsafe main process (701) killed by TERM signal
gpio_ich: GPIO from 195 to 255 on gpio_ich
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xb6
microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xb6
microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xb6
microcode: Microcode Update Driver: v2.00 , Peter Oruba
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
[drm] nouveau 0000:01:00.0: allocated 1920x1200 fb: 0x2c0000, bo ffff88012734b800
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 240x75
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
type=1400 audit(1365169608.528:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=801 comm="apparmor_parser"
type=1400 audit(1365169608.528:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=801 comm="apparmor_parser"
type=1400 audit(1365169608.536:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=802 comm="apparmor_parser"
type=1400 audit(1365169608.536:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=802 comm="apparmor_parser"
type=1400 audit(1365169608.536:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=803 comm="apparmor_parser"
type=1400 audit(1365169608.536:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=803 comm="apparmor_parser"
type=1400 audit(1365169608.540:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=804 comm="apparmor_parser"
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
ppdev: user-space parallel port driver
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: hwaddr 00:15:af:29:54:1c, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
rtl8187: Customer ID is 0x00
Registered led device: rtl8187-phy0::radio
Registered led device: rtl8187-phy0::tx
Registered led device: rtl8187-phy0::rx
rtl8187: wireless switch is on
usbcore: registered new interface driver rtl8187
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 0000:02:00.0: eth0: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
wlan0: authenticate with 00:24:d4:99:03:ec
wlan0: send auth to 00:24:d4:99:03:ec (try 1/3)
wlan0: authenticated
wlan0: associate with 00:24:d4:99:03:ec (try 1/3)
wlan0: RX AssocResp from 00:24:d4:99:03:ec (capab=0x411 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
usb 8-1: USB disconnect, device number 2
usb 8-1: new low-speed USB device number 3 using uhci_hcd
usb 8-1: New USB device found, idVendor=03f0, idProduct=8607
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1: Product: HP Mobile USB Optical Mouse
usb 8-1: Manufacturer: PixArt
input: PixArt HP Mobile USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input4
hid-generic 0003:03F0:8607.0002: input,hidraw0: USB HID v1.11 Mouse [PixArt HP Mobile USB Optical Mouse] on usb-0000:00:1d.2-1/input0
init: tty1 main process ended, respawning
init: tty2 main process ended, respawning
sky2 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
wlan0: deauthenticating from 00:24:d4:99:03:ec by local choice (reason=3)
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR INVALID_VALUE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 2 class 0x502d mthd 0x0604 data 0x001003f0
[drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 2 Get 0x00200308b8 Put 0x0020030f78 IbGet 0x00000657 IbPut 0x0000065a State 0x80004861 (err: INVALID_CMD) Push 0x00406040
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR INVALID_VALUE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x1288 data 0x0004e680
[drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 2 Get 0x002002457c Put 0x0020028ff8 IbGet 0x00000e29 IbPut 0x00000e2a State 0x80000020 (err: INVALID_CMD) Push 0x00406040
[drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 2 Get 0x0020023214 Put 0x0020028d1c IbGet 0x00000b4d IbPut 0x00000b4e State 0x8000f28c (err: INVALID_CMD) Push 0x00406040
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR INVALID_BITFIELD
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x1288 data 0x2139f000
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x1360 data 0x00000000
[drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 2 Get 0x0020020878 Put 0x0020020dc0 IbGet 0x000002c5 IbPut 0x000002cf State 0x80000020 (err: INVALID_CMD) Push 0x00406040
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - Unknown fault at address 002110e000
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - e0c: 00000000, e18: 00000000, e1c: 00000000, e20: 00003b00, e24: 00030000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x15e0 data 0x00000000
[drm] nouveau 0000:01:00.0: VM: trapped write at 0x002110e000 on ch 2 [0x00000d0a] PGRAPH/PROP/RT0 reason: PAGE_NOT_PRESENT
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - Unknown fault at address 002110e000
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - e0c: 00000000, e18: 00000000, e1c: 0000000a, e20: 00003b00, e24: 00030000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x15e0 data 0x00000000
[drm] nouveau 0000:01:00.0: VM: trapped write at 0x002110e000 on ch 2 [0x00000d0a] PGRAPH/PROP/RT0 reason: PAGE_NOT_PRESENT
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - Unknown fault at address 002110e200
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - e0c: 00000000, e18: 00000000, e1c: 000a0000, e20: 00003b00, e24: 00030000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x15e0 data 0x00000000
[drm] nouveau 0000:01:00.0: VM: trapped write at 0x002110e200 on ch 2 [0x00000d0a] PGRAPH/PROP/RT0 reason: PAGE_NOT_PRESENT
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - Unknown fault at address 002110e200
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - e0c: 00000000, e18: 00000000, e1c: 000a0000, e20: 00003b00, e24: 00030000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x15e0 data 0x00000000
[drm] nouveau 0000:01:00.0: VM: trapped write at 0x002110e200 on ch 2 [0x00000d0a] PGRAPH/PROP/RT0 reason: PAGE_NOT_PRESENT
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - Unknown fault at address 002110e200
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - e0c: 00000000, e18: 00000000, e1c: 000a000a, e20: 00003b00, e24: 00030000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x15e0 data 0x00000000
[drm] nouveau 0000:01:00.0: VM: trapped write at 0x002110e200 on ch 2 [0x00000d0a] PGRAPH/PROP/RT0 reason: PAGE_NOT_PRESENT
[drm] nouveau 0000:01:00.0: magic set 0:
[drm] nouveau 0000:01:00.0: 0x00408904: 0x74087a05
[drm] nouveau 0000:01:00.0: 0x00408908: 0x002110e0
[drm] nouveau 0000:01:00.0: 0x0040890c: 0x40000e00
[drm] nouveau 0000:01:00.0: 0x00408910: 0x10e00000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP_TEXTURE - TP0: Unhandled ustatus 0x00000003
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - Unknown fault at address 0020a50000
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - e0c: 00000000, e18: 00000000, e1c: 00000000, e20: 00001100, e24: 00030000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x15e0 data 0x00000000
[drm] nouveau 0000:01:00.0: VM: trapped write at 0x0020a50200 on ch 2 [0x00000d0a] PGRAPH/PROP/RT0 reason: PAGE_NOT_PRESENT
[drm] nouveau 0000:01:00.0: magic set 0:
[drm] nouveau 0000:01:00.0: 0x00408904: 0x20097905
[drm] nouveau 0000:01:00.0: 0x00408908: 0x0020a520
[drm] nouveau 0000:01:00.0: 0x0040890c: 0x40000e00
[drm] nouveau 0000:01:00.0: 0x00408910: 0xa5200000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP_TEXTURE - TP0: Unhandled ustatus 0x00000003
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - Unknown fault at address 0020a50000
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - e0c: 00000000, e18: 00000000, e1c: 00000000, e20: 00001100, e24: 00030000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x15e0 data 0x00000000
[drm] nouveau 0000:01:00.0: VM: trapped write at 0x0020a50000 on ch 2 [0x00000d0a] PGRAPH/PROP/RT0 reason: PAGE_NOT_PRESENT
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_2D - TP 0 - Unknown fault at address 0020a53000
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_2D - TP 0 - e0c: 00000000, e18: 00000000, e1c: 00000000, e20: 00000037, e24: 0c030000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 2 class 0x502d mthd 0x0860 data 0x66666666
[drm] nouveau 0000:01:00.0: VM: trapped write at 0x0020a53100 on ch 2 [0x00000d0a] PGRAPH/PROP/DST2D reason: PAGE_NOT_PRESENT
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_2D - TP 0 - Unknown fault at address 0020a53200
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_2D - TP 0 - e0c: 00000000, e18: 00000000, e1c: 000a0008, e20: 00000037, e24: 0c030000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 2 class 0x502d mthd 0x0860 data 0x00246666
[drm] nouveau 0000:01:00.0: VM: trapped write at 0x0020a53200 on ch 2 [0x00000d0a] PGRAPH/PROP/DST2D reason: PAGE_NOT_PRESENT
[drm] nouveau 0000:01:00.0: magic set 0:
[drm] nouveau 0000:01:00.0: 0x00408904: 0x20087f05
[drm] nouveau 0000:01:00.0: 0x00408908: 0x0020a500
[drm] nouveau 0000:01:00.0: 0x0040890c: 0x40000e00
[drm] nouveau 0000:01:00.0: 0x00408910: 0xa5000000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP_TEXTURE - TP0: Unhandled ustatus 0x00000003
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - Unknown fault at address 0020a35100
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - e0c: 00000000, e18: 00000000, e1c: 00040004, e20: 00002a00, e24: 00030000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x15e0 data 0x00000000
[drm] nouveau 0000:01:00.0: VM: trapped write at 0x0020a35100 on ch 2 [0x00000d0a] PGRAPH/PROP/RT0 reason: PAGE_NOT_PRESENT
[drm] nouveau 0000:01:00.0: magic set 0:
[drm] nouveau 0000:01:00.0: 0x00408904: 0x20087b01
[drm] nouveau 0000:01:00.0: 0x00408908: 0x0020a37b
[drm] nouveau 0000:01:00.0: 0x0040890c: 0x80000e00
[drm] nouveau 0000:01:00.0: 0x00408910: 0xa3500000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP_TEXTURE - TP0: Unhandled ustatus 0x00000003
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 2 class 0x502d mthd 0x08dc data 0x00000000
[drm] nouveau 0000:01:00.0: VM: trapped read at 0x0020a37a00 on ch 2 [0x00000d0a] PGRAPH/TEXTURE/00 reason: PAGE_NOT_PRESENT
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - Unknown fault at address 00213af000
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - e0c: 00000000, e18: 00000000, e1c: 00000000, e20: 00003b00, e24: 00030000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x15e0 data 0x00000000
[drm] nouveau 0000:01:00.0: VM: trapped write at 0x00213af000 on ch 2 [0x00000d0a] PGRAPH/PROP/RT0 reason: PAGE_NOT_PRESENT
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - Unknown fault at address 00213af000
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - e0c: 00000000, e18: 00000000, e1c: 0000000a, e20: 00003b00, e24: 00030000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x15e0 data 0x00000000
[drm] nouveau 0000:01:00.0: VM: trapped write at 0x00213af000 on ch 2 [0x00000d0a] PGRAPH/PROP/RT0 reason: PAGE_NOT_PRESENT
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - Unknown fault at address 00213af000
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - e0c: 00000000, e18: 00000000, e1c: 00000000, e20: 00003b00, e24: 00030000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x15e0 data 0x00000000
[drm] nouveau 0000:01:00.0: VM: trapped write at 0x00213af000 on ch 2 [0x00000d0a] PGRAPH/PROP/RT0 reason: PAGE_NOT_PRESENT
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - Unknown fault at address 00213af000
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - e0c: 00000000, e18: 00000000, e1c: 00000000, e20: 00003b00, e24: 00030000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x15e0 data 0x00000000
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - Unknown fault at address 00213af000
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - e0c: 00000000, e18: 00000000, e1c: 0000000a, e20: 00003b00, e24: 00030000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x15e0 data 0x00000000
[drm] nouveau 0000:01:00.0: VM: trapped write at 0x00213af000 on ch 2 [0x00000d0a] PGRAPH/PROP/RT0 reason: PAGE_NOT_PRESENT
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - Unknown fault at address 00213af200
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - e0c: 00000000, e18: 00000000, e1c: 000a0000, e20: 00003b00, e24: 00030000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x15e0 data 0x00000000
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - Unknown fault at address 00213af200
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - e0c: 00000000, e18: 00000000, e1c: 000a0000, e20: 00003b00, e24: 00030000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x15e0 data 0x00000000
[drm] nouveau 0000:01:00.0: VM: trapped write at 0x00213af200 on ch 2 [0x00000d0a] PGRAPH/PROP/RT0 reason: PAGE_NOT_PRESENT
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - Unknown fault at address 00213af200
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - e0c: 00000000, e18: 00000000, e1c: 000a000a, e20: 00003b00, e24: 00030000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x15e0 data 0x00000000
[drm] nouveau 0000:01:00.0: VM: trapped write at 0x00213af200 on ch 2 [0x00000d0a] PGRAPH/PROP/RT0 reason: PAGE_NOT_PRESENT
[drm] nouveau 0000:01:00.0: magic set 0:
[drm] nouveau 0000:01:00.0: 0x00408904: 0x74087e05
[drm] nouveau 0000:01:00.0: 0x00408908: 0x00213af0
[drm] nouveau 0000:01:00.0: 0x0040890c: 0x40000e00
[drm] nouveau 0000:01:00.0: 0x00408910: 0x3af00000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP_TEXTURE - TP0: Unhandled ustatus 0x00000003
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - Unknown fault at address 00213ab000
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - e0c: 00000000, e18: 00000000, e1c: 00000000, e20: 00001100, e24: 00030000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x15e0 data 0x00000000
[drm] nouveau 0000:01:00.0: VM: trapped write at 0x00213ab000 on ch 2 [0x00000d0a] PGRAPH/PROP/RT0 reason: PAGE_NOT_PRESENT
[drm] nouveau 0000:01:00.0: magic set 0:
[drm] nouveau 0000:01:00.0: 0x00408904: 0x20097d05
[drm] nouveau 0000:01:00.0: 0x00408908: 0x00213ad0
[drm] nouveau 0000:01:00.0: 0x0040890c: 0x40000e00
[drm] nouveau 0000:01:00.0: 0x00408910: 0x3ad00000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP_TEXTURE - TP0: Unhandled ustatus 0x00000003
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - Unknown fault at address 00213ab000
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - e0c: 00000000, e18: 00000000, e1c: 00000000, e20: 00001100, e24: 00030000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x15e0 data 0x00000000
[drm] nouveau 0000:01:00.0: VM: trapped write at 0x00213ab000 on ch 2 [0x00000d0a] PGRAPH/PROP/RT0 reason: PAGE_NOT_PRESENT
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_2D - TP 0 - Unknown fault at address 00213b0000
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_2D - TP 0 - e0c: 00000000, e18: 00000000, e1c: 00000000, e20: 00000037, e24: 0c030000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 2 class 0x502d mthd 0x0860 data 0x00246666
[drm] nouveau 0000:01:00.0: VM: trapped write at 0x00213b0100 on ch 2 [0x00000d0a] PGRAPH/PROP/DST2D reason: PAGE_NOT_PRESENT
[drm] nouveau 0000:01:00.0: magic set 0:
[drm] nouveau 0000:01:00.0: 0x00408904: 0x2008780a
[drm] nouveau 0000:01:00.0: 0x00408908: 0x00213ab0
[drm] nouveau 0000:01:00.0: 0x0040890c: 0x40000e00
[drm] nouveau 0000:01:00.0: 0x00408910: 0x3ab00000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP_TEXTURE - TP0: Unhandled ustatus 0x00000003
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - Unknown fault at address 0021398100
[drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_RT - TP 0 - e0c: 00000000, e18: 00000000, e1c: 00040004, e20: 00002a00, e24: 00030000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x15e0 data 0x00000000
[drm] nouveau 0000:01:00.0: VM: trapped write at 0x0021398100 on ch 2 [0x00000d0a] PGRAPH/PROP/RT0 reason: PAGE_NOT_PRESENT
[drm] nouveau 0000:01:00.0: magic set 0:
[drm] nouveau 0000:01:00.0: 0x00408904: 0x20087401
[drm] nouveau 0000:01:00.0: 0x00408908: 0x002139ab
[drm] nouveau 0000:01:00.0: 0x0040890c: 0x80000e00
[drm] nouveau 0000:01:00.0: 0x00408910: 0x39800000
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP_TEXTURE - TP0: Unhandled ustatus 0x00000003
[drm] nouveau 0000:01:00.0: PGRAPH - TRAP
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 2 class 0x502d mthd 0x08dc data 0x00000000
[drm] nouveau 0000:01:00.0: VM: trapped read at 0x0021399b00 on ch 2 [0x00000d0a] PGRAPH/TEXTURE/00 reason: PAGE_NOT_PRESENT
sky2 0000:02:00.0: eth0: disabling interface
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 6:0:0:0: [sda] Synchronizing SCSI cache
i8042 kbd 00:0a: wake-up capability enabled by ACPI
[drm] nouveau 0000:01:00.0: Disabling display...
[drm] nouveau 0000:01:00.0: Disabling fbcon...
[drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
[drm] nouveau 0000:01:00.0: Evicting buffers...
ACPI handle has no context!
sd 6:0:0:0: [sda] Stopping disk
PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 119.815 msecs
usb 1-3: reset high-speed USB device number 2 using ehci_hcd
PM: suspend of drv:usb dev:1-3 complete after 327.437 msecs
PM: suspend of drv:usb dev:usb1 complete after 312.707 msecs
PM: suspend of drv:ehci_hcd dev:0000:00:1a.7 complete after 327.081 msecs
[drm] nouveau 0000:01:00.0: Idling channels...
[drm] nouveau 0000:01:00.0: Suspending GPU objects...
[drm] nouveau 0000:01:00.0: And we're gone!
PM: suspend of drv:nouveau dev:0000:01:00.0 complete after 2204.493 msecs
PM: suspend of drv:pcieport dev:0000:00:01.0 complete after 2202.976 msecs
PM: suspend of drv:sd dev:6:0:0:0 complete after 2621.606 msecs
PM: suspend of drv:scsi dev:target6:0:0 complete after 2621.591 msecs
PM: suspend of drv:scsi dev:host6 complete after 2621.446 msecs
PM: suspend of drv: dev:ata7 complete after 2621.410 msecs
PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 2619.993 msecs
PM: suspend of drv: dev:pci0000:00 complete after 2618.950 msecs
PM: suspend of devices complete after 2635.635 msecs
PM: suspend devices took 2.636 seconds
PM: late suspend of devices complete after 0.337 msecs
ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
uhci_hcd 0000:00:1a.2: wake-up capability enabled by ACPI
uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
PM: noirq suspend of devices complete after 187.797 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
CPU 2 is now offline
Broke affinity for irq 17
CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
Booting Node 0 Processor 1 APIC 0x1
CPU1 is up
Booting Node 0 Processor 2 APIC 0x2
CPU2 is up
Booting Node 0 Processor 3 APIC 0x3
CPU3 is up
ACPI: Waking up from system sleep state S3
uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
uhci_hcd 0000:00:1a.2: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
PM: noirq resume of devices complete after 1.113 msecs
PM: early resume of devices complete after 0.114 msecs
uhci_hcd 0000:00:1a.0: setting latency timer to 64
usb usb3: root hub lost power or was reset
uhci_hcd 0000:00:1a.1: setting latency timer to 64
usb usb4: root hub lost power or was reset
uhci_hcd 0000:00:1a.2: setting latency timer to 64
usb usb5: root hub lost power or was reset
ehci_hcd 0000:00:1a.7: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
uhci_hcd 0000:00:1d.1: setting latency timer to 64
usb usb7: root hub lost power or was reset
[drm] nouveau 0000:01:00.0: We're back, enabling device...
uhci_hcd 0000:00:1d.0: setting latency timer to 64
[drm] nouveau 0000:01:00.0: POSTing device...
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC0C3
usb usb6: root hub lost power or was reset
uhci_hcd 0000:00:1d.2: setting latency timer to 64
ehci_hcd 0000:00:1d.7: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
usb usb8: root hub lost power or was reset
ahci 0000:00:1f.2: setting latency timer to 64
pata_jmicron 0000:03:00.1: setting latency timer to 64
i8042 kbd 00:0a: wake-up capability disabled by ACPI
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC47D
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD1EB
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD2EA
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD51A
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD57F
[drm] nouveau 0000:01:00.0: Restoring GPU objects...
PM: resume of drv: dev:ep_00 complete after 117.846 msecs
PM: resume of drv:hub dev:4-0:1.0 complete after 117.862 msecs
PM: resume of drv: dev:ep_81 complete after 117.878 msecs
PM: resume of drv:hub dev:5-0:1.0 complete after 117.862 msecs
PM: resume of drv: dev:ep_81 complete after 117.865 msecs
PM: resume of drv: dev:ep_00 complete after 117.714 msecs
PM: resume of drv: dev:ep_00 complete after 117.892 msecs
PM: resume of drv:hub dev:6-0:1.0 complete after 117.783 msecs
PM: resume of drv: dev:ep_81 complete after 117.761 msecs
PM: resume of drv: dev:ep_00 complete after 117.975 msecs
PM: resume of drv:hub dev:3-0:1.0 complete after 117.986 msecs
PM: resume of drv:hub dev:7-0:1.0 complete after 117.703 msecs
PM: resume of drv: dev:ep_00 complete after 117.652 msecs
PM: resume of drv: dev:ep_81 complete after 117.681 msecs
PM: resume of drv: dev:ep_81 complete after 117.995 msecs
PM: resume of drv:scsi dev:host1 complete after 168.839 msecs
PM: resume of drv:scsi_host dev:host1 complete after 168.824 msecs
[drm] nouveau 0000:01:00.0: Reinitialising engines...
[drm] nouveau 0000:01:00.0: Restoring mode...
ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
PM: resume of drv:hub dev:8-0:1.0 complete after 225.503 msecs
PM: resume of drv: dev:ep_00 complete after 225.449 msecs
PM: resume of drv: dev:ep_81 complete after 225.491 msecs
PM: resume of drv:usb dev:8-1 complete after 224.739 msecs
ata1.00: configured for UDMA/33
PM: resume of drv:scsi dev:host0 complete after 239.539 msecs
PM: resume of drv:ata_port dev:ata1 complete after 231.080 msecs
PM: resume of drv:scsi_host dev:host0 complete after 239.530 msecs
PM: resume of drv:scsi dev:target0:0:0 complete after 239.117 msecs
PM: resume of drv:sr dev:0:0:0:0 complete after 239.099 msecs
PM: resume of drv:scsi_device dev:0:0:0:0 complete after 239.087 msecs
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
PM: resume of drv:scsi dev:host4 complete after 337.196 msecs
PM: resume of drv:scsi_host dev:host4 complete after 337.190 msecs
ata9: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
PM: resume of drv:scsi dev:host3 complete after 345.207 msecs
PM: resume of drv:scsi_host dev:host3 complete after 345.205 msecs
PM: resume of drv:scsi dev:host5 complete after 345.169 msecs
PM: resume of drv:scsi_host dev:host5 complete after 345.159 msecs
PM: resume of drv:scsi dev:host7 complete after 353.096 msecs
PM: resume of drv:scsi_host dev:host7 complete after 353.090 msecs
PM: resume of drv:scsi dev:host8 complete after 357.017 msecs
PM: resume of drv:scsi dev:host9 complete after 357.007 msecs
PM: resume of drv:scsi_host dev:host8 complete after 357.029 msecs
PM: resume of drv:scsi_host dev:host9 complete after 357.008 msecs
PM: resume of drv:scsi dev:host2 complete after 361.231 msecs
PM: resume of drv:ata_port dev:ata3 complete after 121.827 msecs
PM: resume of drv:scsi_host dev:host2 complete after 361.225 msecs
usb 8-1: reset low-speed USB device number 3 using uhci_hcd
PM: resume of drv:usbhid dev:8-1:1.0 complete after 804.799 msecs
PM: resume of drv: dev:ep_00 complete after 804.771 msecs
PM: resume of drv: dev:ep_81 complete after 804.793 msecs
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.00: configured for UDMA/133
PM: resume of drv:scsi dev:host6 complete after 9117.114 msecs
PM: resume of drv:ata_port dev:ata7 complete after 8755.990 msecs
PM: resume of drv:scsi dev:target6:0:0 complete after 9116.808 msecs
PM: resume of drv:sd dev:6:0:0:0 complete after 9116.793 msecs
sd 6:0:0:0: [sda] Starting disk
PM: resume of drv:scsi_host dev:host6 complete after 9117.141 msecs
PM: resume of drv:scsi_device dev:6:0:0:0 complete after 9124.363 msecs
PM: resume of devices complete after 9125.995 msecs
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy1: hwaddr 00:15:af:29:54:1c, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
rtl8187: Customer ID is 0x00
Registered led device: rtl8187-phy1::radio
Registered led device: rtl8187-phy1::tx
Registered led device: rtl8187-phy1::rx
rtl8187: wireless switch is on
PM: resume devices took 9.288 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
sky2 0000:02:00.0: eth0: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 2 Get 0x0020026c5c Put 0x0020028cac IbGet 0x00000cd6 IbPut 0x00000cd7 State 0x80004861 (err: INVALID_CMD) Push 0x00406040
[drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 2 Get 0x002002b800 Put 0x0020030e7c IbGet 0x00000e4c IbPut 0x00000e4d State 0x80004861 (err: INVALID_CMD) Push 0x00504031
[drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 2 Get 0x002001e078 Put 0x002001e7d8 IbGet 0x00000493 IbPut 0x00000494 State 0x8000f28c (err: INVALID_CMD) Push 0x00406040
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR INVALID_VALUE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x1288 data 0x00320230
[drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 2 Get 0x00200228c4 Put 0x00200230ac IbGet 0x00000c31 IbPut 0x00000c32 State 0x8000e6a4 (err: INVALID_CMD) Push 0x00706011
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x1360 data 0x00000001
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x1340 data 0x00008006
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x1344 data 0x00004001
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x1348 data 0x00004001
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x134c data 0x00008006
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x1350 data 0x00004001
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x1358 data 0x00004001
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR INVALID_VALUE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x1288 data 0x00044110
[drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 2 Get 0x00200286f8 Put 0x0020028de8 IbGet 0x0000075a IbPut 0x0000075d State 0x80000020 (err: INVALID_CMD) Push 0x00406040
[drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 2 Get 0x0020023e70 Put 0x00200245a0 IbGet 0x000007c6 IbPut 0x000007c9 State 0x80000030 (err: INVALID_CMD) Push 0x00406040
[drm] nouveau 0000:01:00.0: PFIFO_CACHE_ERROR - Ch 4/3 Mthd 0x1640 Data 0x00000000
[drm] nouveau 0000:01:00.0: Unexpected pageflip in channel 4.
[drm] nouveau 0000:01:00.0: PFIFO_CACHE_ERROR - Ch 4/2 Mthd 0x028c Data 0x00000342
[drm] nouveau 0000:01:00.0: PFIFO_CACHE_ERROR - Ch 4/2 Mthd 0x02ac Data 0x00000003
[drm] nouveau 0000:01:00.0: Unexpected pageflip in channel 4.
[drm] nouveau 0000:01:00.0: PFIFO_CACHE_ERROR - Ch 4/2 Mthd 0x028c Data 0x00000342
[drm] nouveau 0000:01:00.0: PFIFO_CACHE_ERROR - Ch 4/2 Mthd 0x02ac Data 0x00000003
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 4 (0x0001a70000) subc 3 class 0x8297 mthd 0x12d4 data 0x00001d01
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 4 (0x0001a70000) subc 3 class 0x8297 mthd 0x1688 data 0x00000000
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 4 (0x0001a70000) subc 3 class 0x8297 mthd 0x1534 data 0x00000000
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 4 (0x0001a70000) subc 3 class 0x8297 mthd 0x13b0 data 0x3f800000
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 4 (0x0001a70000) subc 3 class 0x8297 mthd 0x1570 data 0x00000000
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 4 (0x0001a70000) subc 3 class 0x8297 mthd 0x166c data 0x00000000
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 4 (0x0001a70000) subc 3 class 0x8297 mthd 0x1518 data 0x3f800000
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 4 (0x0001a70000) subc 3 class 0x8297 mthd 0x1520 data 0x00000000
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 4 (0x0001a70000) subc 3 class 0x8297 mthd 0x1658 data 0x00000000
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 4 (0x0001a70000) subc 3 class 0x8297 mthd 0x0dac data 0x00001b02
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 4 (0x0001a70000) subc 3 class 0x8297 mthd 0x0db0 data 0x00001b02
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 4 (0x0001a70000) subc 3 class 0x8297 mthd 0x0db4 data 0x00000000
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 4 (0x0001a70000) subc 3 class 0x8297 mthd 0x1918 data 0x00000001
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 4 (0x0001a70000) subc 3 class 0x8297 mthd 0x191c data 0x00000900
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 4 (0x0001a70000) subc 3 class 0x8297 mthd 0x1920 data 0x00000405
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 4 (0x0001a70000) subc 3 class 0x8297 mthd 0x168c data 0x00000000
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 4 (0x0001a70000) subc 3 class 0x8297 mthd 0x0dc0 data 0x00000000
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 4 (0x0001a70000) subc 3 class 0x8297 mthd 0x0dc4 data 0x00000000
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 4 (0x0001a70000) subc 3 class 0x8297 mthd 0x0dc8 data 0x00000000
nouveau_ratelimit: 1 callbacks suppressed
[drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 2 Get 0x0020036094 Put 0x0020038fec IbGet 0x000001d1 IbPut 0x000001d2 State 0x80004861 (err: INVALID_CMD) Push 0x00406040
[drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 2 Get 0x00200340c0 Put 0x0020036134 IbGet 0x000004b2 IbPut 0x000004b3 State 0x8000e684 (err: INVALID_CMD) Push 0x00406040
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x1360 data 0x00000001
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x1340 data 0x00008006
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x1344 data 0x00004001
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x1348 data 0x00004001
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x134c data 0x00008006
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x1350 data 0x00004001
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR BEGIN_END_ACTIVE
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 7 class 0x8297 mthd 0x1358 data 0x00004001
[drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 2 Get 0x002002e90c Put 0x0020030ff4 IbGet 0x00000c24 IbPut 0x00000c25 State 0x80004861 (err: INVALID_CMD) Push 0x00406040
[drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 2 Get 0x0020030474 Put 0x0020030ff4 IbGet 0x000001e2 IbPut 0x000001e3 State 0x80004861 (err: INVALID_CMD) Push 0x00704031
[drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 2 Get 0x002001ff7c Put 0x0020020ff8 IbGet 0x000002eb IbPut 0x000002ee State 0x80004861 (err: INVALID_CMD) Push 0x00406040
[drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 2 Get 0x0020027808 Put 0x0020028fe8 IbGet 0x00000f56 IbPut 0x00000f57 State 0x80000040 (err: INVALID_CMD) Push 0x00406040
[drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 2 Get 0x0020030220 Put 0x0020030fe8 IbGet 0x00000d80 IbPut 0x00000d83 State 0x80004861 (err: INVALID_CMD) Push 0x00406040
[drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 2 Get 0x0020025d48 Put 0x0020028fe8 IbGet 0x00000ece IbPut 0x00000ecf State 0x80004861 (err: INVALID_CMD) Push 0x00406040
[drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 2 Get 0x002002e3b0 Put 0x002002e440 IbGet 0x00000656 IbPut 0x000006a7 State 0x8000458c (err: INVALID_CMD) Push 0x00406040
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR INVALID_BITFIELD
[drm] nouveau 0000:01:00.0: PGRAPH - DATA_ERROR
[drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000d0a000) subc 2 class 0x502d mthd 0x0584 data 0x00000152
[drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 2 Get 0x0020027384 Put 0x0020028ff4 IbGet 0x00000404 IbPut 0x00000405 State 0x80004861 (err: INVALID_CMD) Push 0x00406040
[drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 2 Get 0x002002e888 Put 0x0020030fe8 IbGet 0x00000bd2 IbPut 0x00000bd3 State 0x80004861 (err: INVALID_CMD) Push 0x00406040