dmesg - initial
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-358.2.1.el6.i686 (mockbuild@c6b8.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Tue Mar 12 21:42:46 UTC 2013
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000de30a000 (usable)
BIOS-e820: 00000000de30a000 - 00000000de30d000 (reserved)
BIOS-e820: 00000000de30d000 - 00000000de311000 (usable)
BIOS-e820: 00000000de311000 - 00000000de916000 (reserved)
BIOS-e820: 00000000de916000 - 00000000deb69000 (ACPI NVS)
BIOS-e820: 00000000deb69000 - 00000000deb76000 (ACPI data)
BIOS-e820: 00000000deb76000 - 00000000deb96000 (ACPI NVS)
BIOS-e820: 00000000deb96000 - 00000000deb9b000 (ACPI data)
BIOS-e820: 00000000deb9b000 - 00000000debde000 (ACPI NVS)
BIOS-e820: 00000000debde000 - 00000000df000000 (usable)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000021f000000 (usable)
DMI 2.7 present.
SMBIOS version 2.7 @ 0xF0480
DMI: System manufacturer System Product Name/P8Z77-M, BIOS 0802 02/24/2012
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x21f000 max_arch_pfn = 0x400000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FF0000000 write-back
2 base 210000000 mask FF8000000 write-back
3 base 218000000 mask FFC000000 write-back
4 base 21C000000 mask FFE000000 write-back
5 base 21E000000 mask FFF000000 write-back
6 base 0E0000000 mask FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 256MB, type WB
reg 2, base: 8448MB, range: 128MB, type WB
reg 3, base: 8576MB, range: 64MB, type WB
reg 4, base: 8640MB, range: 32MB, type WB
reg 5, base: 8672MB, range: 16MB, type WB
reg 6, base: 3584MB, range: 512MB, type UC
total RAM covered: 8176M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 512MB, type WB
reg 5, base: 8688MB, range: 16MB, type UC
e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
initial memory mapped : 0 - 01000000
init_memory_mapping: 0000000000000000-00000000375fe000
NX (Execute Disable) protection: active
0000000000 - 0000200000 page 4k
0000200000 - 0037400000 page 2M
0037400000 - 00375fe000 page 4k
kernel direct mapping tables up to 375fe000 @ 10000-18000
RAMDISK: 37139000 - 37fef9a8
Allocated new RAMDISK: 00c79000 - 01b2f9a8
Move RAMDISK from 0000000037139000 - 0000000037fef9a7 to 00c79000 - 01b2f9a7
ACPI: RSDP 000f0450 00024 (v02 ALASKA)
ACPI: XSDT deb69070 00064 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP deb73f80 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT deb69168 0AE15 (v02 ALASKA A M I 00000015 INTL 20051117)
ACPI: FACS deb94f80 00040
ACPI: APIC deb74078 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG deb740f0 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET deb74130 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT deb74168 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT deb744d8 009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT deb74e88 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: BGRT deb75920 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
7802MB HIGHMEM available.
885MB LOWMEM available.
mapped low ram: 0 - 375fe000
low ram: 0 - 375fe000
node 0 low ram: 00000000 - 375fe000
node 0 bootmap 00014000 - 0001aec0
(9 early reservations) ==> bootmem [0000000000 - 00375fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000400000 - 0000c6f610] TEXT DATA BSS ==> [0000400000 - 0000c6f610]
#4 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000]
#5 [0000c70000 - 0000c78336] BRK ==> [0000c70000 - 0000c78336]
#6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
#7 [0000c79000 - 0001b2f9a8] NEW RAMDISK ==> [0000c79000 - 0001b2f9a8]
#8 [0000014000 - 000001b000] BOOTMAP ==> [0000014000 - 000001b000]
found SMP MP-table at [c00fccf0] fccf0
Reserving 129MB of memory at 32MB for crashkernel (System RAM: 8688MB)
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000375fe
HighMem 0x000375fe -> 0x0021f000
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x000de30a
0: 0x000de30d -> 0x000de311
0: 0x000debde -> 0x000df000
0: 0x00100000 -> 0x0021f000
On node 0 totalpages: 2086589
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3949 pages, LIFO batch:0
Normal zone: 1740 pages used for memmap
Normal zone: 220978 pages, LIFO batch:31
HighMem zone: 15605 pages used for memmap
HighMem zone: 1844285 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at df000000 (gap: df000000:19000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @cde00000 s36088 r0 d21256 u524288
pcpu-alloc: s36088 r0 d21256 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2069212
Kernel command line: ro root=/dev/mapper/vg_client-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=vg_client/lv_root rd_NO_MD rd_LVM_LV=vg_client/lv_swap SYSFONT=latarcyrheb-sun16 rhgb quiet KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM crashkernel=129M@0M
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Initializing HighMem for node 0 (000375fe:0021f000)
Memory: 8122552k/8896512k available (4419k kernel code, 222588k reserved, 2500k data, 512k init, 7439560k highmem)
virtual kernel memory layout:
fixmap : 0xffad5000 - 0xfffff000 (5288 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xc0ac3000 - 0xc0b43000 ( 512 kB)
.data : 0xc0850d08 - 0xc0ac2008 (2500 kB)
.text : 0xc0400000 - 0xc0850d08 (4419 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
NR_IRQS:2304 nr_irqs:440
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3109.385 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6218.77 BogoMIPS (lpj=3109385)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5-3450 CPU @ 3.10GHz stepping 09
Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
Booting Node 0, Processors #1
Initializing CPU#1
#2
Initializing CPU#2
#3 Ok.
Initializing CPU#3
Brought up 4 CPUs
Total of 4 processors activated (24875.08 BogoMIPS).
sizeof(vma)=100 bytes
sizeof(page)=32 bytes
sizeof(inode)=352 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=508 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=184 bytes
sizeof(task_struct)=1348 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at de916000 (2437120 bytes)
PM: Registering ACPI NVS region at deb76000 (131072 bytes)
PM: Registering ACPI NVS region at deb9b000 (274432 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI Error (psargs-0359): [RAMB] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20090903/nsinit-347)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:14.0: reg 10: [mem 0xf7100000-0xf710ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xf711a000-0xf711a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xf7118000-0xf71183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xf7110000-0xf7113fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xf7117000-0xf71173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 24: [mem 0xf7116000-0xf71167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xf7115000-0xf71150ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xf4000000-0xf5ffffff 64bit]
pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf701ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 18: [mem 0xf0004000-0xf0004fff 64bit pref]
pci 0000:03:00.0: reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 03-03]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:00:1c.6: PCI bridge to [bus 04-05] (subtractive decode)
pci 0000:00:1c.6: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.6: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.6: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
pci 0000:04:00.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0xfff000-0x0000] (disabled)
pci 0000:04:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:04:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07.PXSX._PRT]
_OSC request data:1 1f 1f
pci0000:00: Requesting ACPI _OSC control (0x1d)
_OSC request data:1 0 1d
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
alloc irq_desc for 24 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 25 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 26 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 27 on node 0
alloc kstat_irqs on node 0
HPET: 8 timers in total, 4 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 24 for MSI
hpet: hpet3 irq 25 for MSI
hpet: hpet4 irq 26 for MSI
hpet: hpet5 irq 27 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed40000-0xfed44fff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io 0x0000-0x001f]
pnp 00:02: [io 0x0081-0x0091]
pnp 00:02: [io 0x0093-0x009f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [mem 0xff000000-0xffffffff]
pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:04: [mem 0xfed00000-0xfed003ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io 0x002e-0x002f]
pnp 00:05: [io 0x004e-0x004f]
pnp 00:05: [io 0x0061]
pnp 00:05: [io 0x0063]
pnp 00:05: [io 0x0065]
pnp 00:05: [io 0x0067]
pnp 00:05: [io 0x0070]
pnp 00:05: [io 0x0080]
pnp 00:05: [io 0x0092]
pnp 00:05: [io 0x00b2-0x00b3]
pnp 00:05: [io 0x0680-0x069f]
pnp 00:05: [io 0x0200-0x020f]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0x0400-0x0453]
pnp 00:05: [io 0x0458-0x047f]
pnp 00:05: [io 0x0500-0x057f]
pnp 00:05: [io 0x164e-0x164f]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [io 0x0070-0x0077]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io 0x0454-0x0457]
pnp 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io 0x0290-0x029f]
pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x0010-0x001f]
pnp 00:09: [io 0x0022-0x003f]
pnp 00:09: [io 0x0044-0x005f]
pnp 00:09: [io 0x0062-0x0063]
pnp 00:09: [io 0x0065-0x006f]
pnp 00:09: [io 0x0072-0x007f]
pnp 00:09: [io 0x0080]
pnp 00:09: [io 0x0084-0x0086]
pnp 00:09: [io 0x0088]
pnp 00:09: [io 0x008c-0x008e]
pnp 00:09: [io 0x0090-0x009f]
pnp 00:09: [io 0x00a2-0x00bf]
pnp 00:09: [io 0x00e0-0x00ef]
pnp 00:09: [io 0x04d0-0x04d1]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io 0x00f0-0x00ff]
pnp 00:0a: [irq 13]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0b: [io 0x03f8-0x03ff]
pnp 00:0b: [irq 4]
pnp 00:0b: [dma 0 disabled]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0c: [mem 0xfed10000-0xfed17fff]
pnp 00:0c: [mem 0xfed18000-0xfed18fff]
pnp 00:0c: [mem 0xfed19000-0xfed19fff]
pnp 00:0c: [mem 0xf8000000-0xfbffffff]
pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
pnp 00:0c: [mem 0xfed90000-0xfed93fff]
pnp 00:0c: [mem 0xfed45000-0xfed8ffff]
pnp 00:0c: [mem 0xff000000-0xffffffff]
pnp 00:0c: [mem 0xfee00000-0xfeefffff]
pnp 00:0c: [mem 0xf0100000-0xf0100fff]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0x0200-0x020f] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x0400-0x0453] has been reserved
system 00:05: [io 0x0458-0x047f] has been reserved
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:07: [io 0x0454-0x0457] has been reserved
system 00:08: [io 0x0290-0x029f] has been reserved
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0c: [mem 0xf0100000-0xf0100fff] has been reserved
PCI: max bus depth: 2 pci_try_num: 3
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0200000-0xf03fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff]
pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 03-03]
pci 0000:00:1c.5: PCI bridge to [bus 03-03]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem disabled]
pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:04:00.0: PCI bridge to [bus 05-05]
pci 0000:04:00.0: PCI bridge to [bus 05-05]
pci 0000:04:00.0: bridge window [io disabled]
pci 0000:04:00.0: bridge window [mem disabled]
pci 0000:04:00.0: bridge window [mem pref disabled]
pci 0000:00:1c.6: PCI bridge to [bus 04-05]
pci 0000:00:1c.6: PCI bridge to [bus 04-05]
pci 0000:00:1c.6: bridge window [io disabled]
pci 0000:00:1c.6: bridge window [mem disabled]
pci 0000:00:1c.6: bridge window [mem pref disabled]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:04:00.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf03fffff]
pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:04: resource 13 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:05: resource 8 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 9 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:05: resource 17 [mem 0xe0000000-0xfeafffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:14.0: PCI INT A disabled
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:01:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15066k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1364365109.319:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1365
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 61EFC48B214F962C
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 28 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
ACPI: acpi_idle yielding to intel_idleACPI: SSDT de8c3018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT de8c4a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT de8c5c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
ERST: Table is not found!
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7118000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-358.2.1.el6.i686 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7117000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-358.2.1.el6.i686 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2013-03-27 06:18:30 UTC (1364365110)
Initalizing network drop monitor service
Freeing unused kernel memory: 512k freed
Write protecting the kernel text: 4420k
Write protecting the kernel read-only data: 1924k
dracut: dracut-004-303.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.6-ioctl (2012-07-25) initialised: dm-devel@redhat.com
udev: starting version 147
ACPI: WMI: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
MXM: GUID detected in BIOS
nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nouveau 0000:01:00.0: setting latency timer to 64
[drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x092a00a2)
[drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[drm] nouveau 0000:01:00.0: BIT BIOS found
[drm] nouveau 0000:01:00.0: Bios version 62.92.6d.00
[drm] nouveau 0000:01:00.0: TMDS table version 2.0
[drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[drm] nouveau 0000:01:00.0: DCB version 4.0
[drm] nouveau 0000:01:00.0: DCB outp 00: 02000300 00000028
[drm] nouveau 0000:01:00.0: DCB outp 01: 01000302 00020030
[drm] nouveau 0000:01:00.0: DCB outp 02: 04011310 00000028
[drm] nouveau 0000:01:00.0: DCB outp 03: 02023322 00020030
[drm] nouveau 0000:01:00.0: DCB conn 00: 00001030
[drm] nouveau 0000:01:00.0: DCB conn 01: 00000100
[drm] nouveau 0000:01:00.0: DCB conn 02: 00000210
[drm] nouveau 0000:01:00.0: DCB conn 03: 00002261
[drm] nouveau 0000:01:00.0: DCB conn 04: 00000213
[drm] nouveau 0000:01:00.0: DCB conn 05: 00002361
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC5D1
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xCB70
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD941
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xDA3F
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xDCA7
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xDD0C
[drm] nouveau 0000:01:00.0: 0xDD0C: Condition still not met after 20ms, skipping following opcodes
[TTM] Zone kernel: Available graphics memory: 349894 kiB
[TTM] Zone highmem: Available graphics memory: 4069674 kiB
[TTM] Initializing pool allocator
[drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM (GDDR3)
[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] nouveau 0000:01:00.0: 1 available performance level(s)
[drm] nouveau 0000:01:00.0: 3: core 600MHz shader 1500MHz memory 900MHz fanspeed 100%
[drm] nouveau 0000:01:00.0: c: core 399MHz shader 810MHz memory 399MHz voltage 1150mV fanspeed 49%
[drm] nouveau 0000:01:00.0: MM: using M2MF for buffer copies
usb 1-1: new high speed USB device number 2 using ehci_hcd
Refined TSC clocksource calibration: 3109.130 MHz.
Switching to clocksource tsc
[drm] nouveau 0000:01:00.0: allocated 1920x1080 fb: 0x330000, bo f5b80200
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
dracut: Starting plymouth daemon
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device number 2 using ehci_hcd
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ahci 0000:00:1f.2: version 3.0
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xa impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116180 irq 29
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116280 irq 29
ata5: DUMMY
ata6: DUMMY
usb 1-1.2: new high speed USB device number 3 using ehci_hcd
usb 1-1.2: New USB device found, idVendor=1058, idProduct=0748
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 1-1.2: Product: My Passport 0748
usb 1-1.2: Manufacturer: Western Digital
usb 1-1.2: SerialNumber: 575837314139324137333639
usb 1-1.2: configuration #1 chosen from 1 choice
usb 2-1.8: new full speed USB device number 3 using ehci_hcd
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: ACPI _SDD failed (AE 0x5)
ata2.00: ACPI _SDD failed (AE 0x5)
usb 2-1.8: New USB device found, idVendor=046d, idProduct=c52e
usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.8: Product: USB Receiver
usb 2-1.8: Manufacturer: Logitech
usb 2-1.8: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/input/input3
generic-usb 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.8/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.1/input/input4
generic-usb 0003:046D:C52E.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.8/input1
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: ACPI _SDD failed (AE 0x5)
ata4.00: ACPI: failed the second time, disabled
ata4.00: ATAPI: ATAPI DVD A DH16A6S, YA16, max UDMA/100
ata2.00: ACPI _SDD failed (AE 0x5)
ata2.00: ACPI: failed the second time, disabled
ata2.00: ATA-8: ST1000DM003-9YN162, CC46, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/100
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST1000DM003-9YN1 CC46 PQ: 0 ANSI: 5
scsi 3:0:0:0: CD-ROM ATAPI DVD A DH16A6S YA16 PQ: 0 ANSI: 5
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
dracut: Scanning devices sda2 for LVM logical volumes vg_client/lv_root vg_client/lv_swap
dracut: inactive '/dev/vg_client/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/vg_client/lv_home' [871.13 GiB] inherit
dracut: inactive '/dev/vg_client/lv_swap' [9.89 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/vg_client-lv_root
dracut: Loading SELinux policy
type=1404 audit(1364365117.502:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 277524 rules.
SELinux: 2048 avtab hash slots, 277524 rules.
SELinux: 9 users, 12 roles, 3897 types, 205 bools, 1 sens, 1024 cats
SELinux: 81 classes, 277524 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
usb-storage: device scan complete
scsi 6:0:0:0: Direct-Access WD My Passport 0748 1019 PQ: 0 ANSI: 6
scsi 6:0:0:1: Enclosure WD SES Device 1019 PQ: 0 ANSI: 6
sd 6:0:0:0: [sdb] 3906963456 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Attached SCSI disk
type=1403 audit(1364365117.804:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
readahead-collector: starting
udev: starting version 147
xhci_hcd 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7100000
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:00:14.0: irq 30 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-358.2.1.el6.i686 xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
usb usb3: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-358.2.1.el6.i686 xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
usb usb4: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
snd_hda_intel 0000:00:1b.0: irq 31 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: resource 0000:00:1f.3 [io 0xf000-0xf01f] conflicts with ACPI region SMBI [io 0xf000-0xf00f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
usb 3-2: new high speed USB device number 2 using xhci_hcd
usb 3-2: New USB device found, idVendor=12d1, idProduct=1037
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: Android Adapter
usb 3-2: Manufacturer: Huawei Incorporated
usb 3-2: SerialNumber: 1C1D6700BCDB
usb 3-2: configuration #1 chosen from 1 choice
usb 3-2: ep 0x87 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi7 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
microcode: CPU0 sig=0x306a9, pf=0x2, revision=0xc
platform microcode: firmware: requesting intel-ucode/06-3a-09
microcode: CPU1 sig=0x306a9, pf=0x2, revision=0xc
platform microcode: firmware: requesting intel-ucode/06-3a-09
microcode: CPU2 sig=0x306a9, pf=0x2, revision=0xc
platform microcode: firmware: requesting intel-ucode/06-3a-09
microcode: CPU3 sig=0x306a9, pf=0x2, revision=0xc
platform microcode: firmware: requesting intel-ucode/06-3a-09
Microcode Update Driver: v2.00 , Peter Oruba
microcode: CPU0 updated to revision 0x13, date = 2012-07-16
microcode: CPU1 updated to revision 0x13, date = 2012-07-16
microcode: CPU2 updated to revision 0x13, date = 2012-07-16
microcode: CPU3 updated to revision 0x13, date = 2012-07-16
sd 1:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
sd 6:0:0:0: Attached scsi generic sg2 type 0
scsi 6:0:0:1: Attached scsi generic sg3 type 13
ses 6:0:0:1: Attached Enclosure device
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:03:00.0: setting latency timer to 64
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
r8169 0000:03:00.0: irq 32 for MSI/MSI-X
r8169 0000:03:00.0: eth0: RTL8168f/8111f at 0xfc1b6000, c8:60:00:9d:73:1d, XID 08000800 IRQ 32
r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usb-storage: device scan complete
scsi 7:0:0:0: Direct-Access Android Adapter 0100 PQ: 0 ANSI: 2
scsi 7:0:0:1: CD-ROM Android Adapter 0100 PQ: 0 ANSI: 2
scsi 7:0:0:2: Direct-Access Android Adapter 0100 PQ: 0 ANSI: 2
sd 7:0:0:0: Attached scsi generic sg4 type 0
sr1: scsi3-mmc drive: 0x/0x caddy
sr 7:0:0:1: Attached scsi CD-ROM sr1
sr 7:0:0:1: Attached scsi generic sg5 type 5
sd 7:0:0:2: Attached scsi generic sg6 type 0
sd 7:0:0:0: [sdc] Attached SCSI removable disk
sd 7:0:0:2: [sdd] Attached SCSI removable disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda1, type ext4), uses xattr
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev dm-2, type ext4), uses xattr
Adding 10371064k swap on /dev/mapper/vg_client-lv_swap. Priority:-1 extents:1 across:10371064k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
readahead-disable-service: delaying service auditd
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
r8169 0000:03:00.0: firmware: requesting rtl_nic/rtl8168f-1.fw
r8169 0000:03:00.0: eth0: link down
r8169 0000:03:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:03:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x4b2 offMax=0x3431
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.6 (interface 0x001a0004).
vboxpci: IOMMU not found (not compiled)
cdrom: This disc doesn't have any tracks I recognize!
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
Bridge firewalling registered
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
device virbr0-nic entered promiscuous mode
virbr0: starting userspace STP failed, starting kernel STP
eth0: no IPv6 routers present
Ebtables v2.0 registered
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
lo: Disabled Privacy Extensions
SELinux: initialized (dev proc, type proc), uses genfs_contexts
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
readahead-collector: starting delayed service auditd
readahead-collector: sorting
readahead-collector: finished
fuse init (API version 7.13)
SELinux: initialized (dev sdb1, type fuseblk), uses genfs_contexts
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
UDF-fs: Partition marked readonly; forcing readonly mount
UDF-fs INFO UDF: Mounting volume 'MY_DATA_011513', timestamp 2013/01/15 15:12 (11e0)
SELinux: initialized (dev sr0, type udf), uses genfs_contexts
warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 80
Raw EDID:
00 ff ff ff ff ff ff 00 1e 6d e3 57 74 cc 00 00
06 15 01 03 80 33 1d 78 ea c6 65 a0 59 58 9d 27
0e 50 54 a7 6b 80 b3 00 81 80 81 40 71 4f 01 01
01 01 01 01 01 01 02 3a 80 18 71 38 2d 40 58 2c
45 00 fe 22 11 00 00 1e 00 00 00 fd 00 38 4b 1e
53 0f 00 0a 20 20 20 20 20 20 00 00 00 fc 00 45
32 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Raw EDID:
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Raw EDID:
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 01 1f ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
lo: Disabled Privacy Extensions
SELinux: initialized (dev proc, type proc), uses genfs_contexts
usb 3-2: USB disconnect, device number 2
usb 3-2: new high speed USB device number 3 using xhci_hcd
usb 3-2: New USB device found, idVendor=12d1, idProduct=1037
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: Android Adapter
usb 3-2: Manufacturer: Huawei Incorporated
usb 3-2: SerialNumber: 1C1D6700BCDB
usb 3-2: configuration #1 chosen from 1 choice
usb 3-2: ep 0x87 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi8 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 8:0:0:0: Direct-Access Android Adapter 0100 PQ: 0 ANSI: 2
scsi 8:0:0:1: CD-ROM Android Adapter 0100 PQ: 0 ANSI: 2
scsi 8:0:0:2: Direct-Access Android Adapter 0100 PQ: 0 ANSI: 2
sd 8:0:0:0: Attached scsi generic sg4 type 0
sr1: scsi3-mmc drive: 0x/0x caddy
sd 8:0:0:0: [sdc] Attached SCSI removable disk
sr 8:0:0:1: Attached scsi CD-ROM sr1
sr 8:0:0:1: Attached scsi generic sg5 type 5
sd 8:0:0:2: Attached scsi generic sg6 type 0
sd 8:0:0:2: [sdd] Attached SCSI removable disk
cdrom: This disc doesn't have any tracks I recognize!
usb 3-2: USB disconnect, device number 3
usb 3-2: new high speed USB device number 4 using xhci_hcd
usb 3-2: New USB device found, idVendor=12d1, idProduct=1037
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: Android Adapter
usb 3-2: Manufacturer: Huawei Incorporated
usb 3-2: SerialNumber: 1C1D6700BCDB
usb 3-2: configuration #1 chosen from 1 choice
usb 3-2: ep 0x87 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi9 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 9:0:0:0: Direct-Access Android Adapter 0100 PQ: 0 ANSI: 2
scsi 9:0:0:1: CD-ROM Android Adapter 0100 PQ: 0 ANSI: 2
scsi 9:0:0:2: Direct-Access Android Adapter 0100 PQ: 0 ANSI: 2
sd 9:0:0:0: Attached scsi generic sg4 type 0
sd 9:0:0:0: [sdc] Attached SCSI removable disk
sr1: scsi3-mmc drive: 0x/0x caddy
sr 9:0:0:1: Attached scsi CD-ROM sr1
sr 9:0:0:1: Attached scsi generic sg5 type 5
sd 9:0:0:2: Attached scsi generic sg6 type 0
sd 9:0:0:2: [sdd] Attached SCSI removable disk
cdrom: This disc doesn't have any tracks I recognize!
usb 3-2: USB disconnect, device number 4
usb 3-2: new high speed USB device number 5 using xhci_hcd
usb 3-2: New USB device found, idVendor=12d1, idProduct=1037
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: Android Adapter
usb 3-2: Manufacturer: Huawei Incorporated
usb 3-2: SerialNumber: 1C1D6700BCDB
usb 3-2: configuration #1 chosen from 1 choice
usb 3-2: ep 0x87 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi10 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 10:0:0:0: Direct-Access Android Adapter 0100 PQ: 0 ANSI: 2
scsi 10:0:0:1: CD-ROM Android Adapter 0100 PQ: 0 ANSI: 2
scsi 10:0:0:2: Direct-Access Android Adapter 0100 PQ: 0 ANSI: 2
sd 10:0:0:0: Attached scsi generic sg4 type 0
sd 10:0:0:0: [sdc] Attached SCSI removable disk
sr1: scsi3-mmc drive: 0x/0x caddy
sr 10:0:0:1: Attached scsi CD-ROM sr1
sr 10:0:0:1: Attached scsi generic sg5 type 5
sd 10:0:0:2: Attached scsi generic sg6 type 0
sd 10:0:0:2: [sdd] Attached SCSI removable disk
cdrom: This disc doesn't have any tracks I recognize!
usb 3-2: USB disconnect, device number 5
usb 3-2: new high speed USB device number 6 using xhci_hcd
usb 3-2: New USB device found, idVendor=12d1, idProduct=1037
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: Android Adapter
usb 3-2: Manufacturer: Huawei Incorporated
usb 3-2: SerialNumber: 1C1D6700BCDB
usb 3-2: configuration #1 chosen from 1 choice
usb 3-2: ep 0x87 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi11 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 11:0:0:0: Direct-Access Android Adapter 0100 PQ: 0 ANSI: 2
scsi 11:0:0:1: CD-ROM Android Adapter 0100 PQ: 0 ANSI: 2
scsi 11:0:0:2: Direct-Access Android Adapter 0100 PQ: 0 ANSI: 2
sd 11:0:0:0: Attached scsi generic sg4 type 0
sd 11:0:0:0: [sdc] Attached SCSI removable disk
sr1: scsi3-mmc drive: 0x/0x caddy
sr 11:0:0:1: Attached scsi CD-ROM sr1
sr 11:0:0:1: Attached scsi generic sg5 type 5
sd 11:0:0:2: Attached scsi generic sg6 type 0
sd 11:0:0:2: [sdd] Attached SCSI removable disk
cdrom: This disc doesn't have any tracks I recognize!
[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 188
Raw EDID:
00 ff ff ff ff ff ff 00 1e 6d e3 54 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Raw EDID:
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Raw EDID:
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Raw EDID:
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 3f ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
nouveau 0000:01:00.0: DVI-I-1: EDID block 0 invalid.
[drm] nouveau 0000:01:00.0: DDC responded, but no EDID for DVI-I-1
usb 3-2: USB disconnect, device number 6
usb 3-2: new high speed USB device number 7 using xhci_hcd
usb 3-2: New USB device found, idVendor=12d1, idProduct=1037
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: Android Adapter
usb 3-2: Manufacturer: Huawei Incorporated
usb 3-2: SerialNumber: 1C1D6700BCDB
usb 3-2: configuration #1 chosen from 1 choice
usb 3-2: ep 0x87 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi12 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 12:0:0:0: Direct-Access Android Adapter 0100 PQ: 0 ANSI: 2
scsi 12:0:0:1: CD-ROM Android Adapter 0100 PQ: 0 ANSI: 2
scsi 12:0:0:2: Direct-Access Android Adapter 0100 PQ: 0 ANSI: 2
sd 12:0:0:0: Attached scsi generic sg4 type 0
sd 12:0:0:0: [sdc] Attached SCSI removable disk
sr1: scsi3-mmc drive: 0x/0x caddy
sr 12:0:0:1: Attached scsi CD-ROM sr1
sr 12:0:0:1: Attached scsi generic sg5 type 5
sd 12:0:0:2: Attached scsi generic sg6 type 0
sd 12:0:0:2: [sdd] Attached SCSI removable disk
cdrom: This disc doesn't have any tracks I recognize!
usb 1-1.1: new low speed USB device number 4 using ehci_hcd
usb 1-1.1: New USB device found, idVendor=0b9b, idProduct=4012
usb 1-1.1: New USB device strings: Mfr=1, Product=4, SerialNumber=0
usb 1-1.1: Product: SAILI Simulator --- XTR5.5+G2+FMS Controller
usb 1-1.1: Manufacturer:
usb 1-1.1: configuration #1 chosen from 1 choice
generic-usb 0003:0B9B:4012.0003: hiddev97,hidraw2: USB HID v1.11 Device [ SAILI Simulator --- XTR5.5+G2+FMS Controller] on usb-0000:00:1a.0-1.1/input0
input: SAILI Simulator --- XTR5.5+G2+FMS Controller as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input10
generic-usb 0003:0B9B:4012.0004: input,hidraw3: USB HID v1.11 Joystick [ SAILI Simulator --- XTR5.5+G2+FMS Controller] on usb-0000:00:1a.0-1.1/input1
usb 3-1: new high speed USB device number 8 using xhci_hcd
usb 3-1: New USB device found, idVendor=08ca, idProduct=2103
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: COACH DSC
usb 3-1: Manufacturer: ZORAN
usb 3-1: SerialNumber: ZORAN01234567
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-1: ep 0x82 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi13 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 8
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 13:0:0:0: Direct-Access DVTS 1.10 PQ: 0 ANSI: 0 CCS
sd 13:0:0:0: Attached scsi generic sg7 type 0
sd 13:0:0:0: [sde] 15523840 512-byte logical blocks: (7.94 GB/7.40 GiB)
sd 13:0:0:0: [sde] Write Protect is off
sd 13:0:0:0: [sde] Mode Sense: 00 06 00 00
sd 13:0:0:0: [sde] Assuming drive cache: write through
sd 13:0:0:0: [sde] Assuming drive cache: write through
sde: sde1
sd 13:0:0:0: [sde] Assuming drive cache: write through
sd 13:0:0:0: [sde] Attached SCSI removable disk
SELinux: initialized (dev sde1, type vfat), uses genfs_contexts
usb 3-2: USB disconnect, device number 7
usb 3-2: new high speed USB device number 9 using xhci_hcd
usb 3-2: New USB device found, idVendor=12d1, idProduct=1037
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: Android Adapter
usb 3-2: Manufacturer: Huawei Incorporated
usb 3-2: SerialNumber: 24DBACD3CE8A
usb 3-2: configuration #1 chosen from 1 choice
usb 3-2: ep 0x87 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi14 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 9
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 14:0:0:0: Direct-Access Android Adapter 0100 PQ: 0 ANSI: 2
scsi 14:0:0:1: CD-ROM Android Adapter 0100 PQ: 0 ANSI: 2
scsi 14:0:0:2: Direct-Access Android Adapter 0100 PQ: 0 ANSI: 2
sd 14:0:0:0: Attached scsi generic sg4 type 0
sr1: scsi3-mmc drive: 0x/0x caddy
sr 14:0:0:1: Attached scsi CD-ROM sr1
sr 14:0:0:1: Attached scsi generic sg5 type 5
sd 14:0:0:2: Attached scsi generic sg6 type 0
sd 14:0:0:0: [sdc] Attached SCSI removable disk
sd 14:0:0:2: [sdd] Attached SCSI removable disk
cdrom: This disc doesn't have any tracks I recognize!
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
lo: Disabled Privacy Extensions
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x3f1 offMax=0x1831
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.10 (interface 0x001a0004).
vboxpci: IOMMU not found (not compiled)