dmesg - multicore
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-generic (buildd@roseapple) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:32:08 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x000000007872cfff] usable
BIOS-e820: [mem 0x000000007872d000-0x000000007872dfff] reserved
BIOS-e820: [mem 0x000000007872e000-0x000000007873afff] usable
BIOS-e820: [mem 0x000000007873b000-0x0000000078d3bfff] ACPI NVS
BIOS-e820: [mem 0x0000000078d3c000-0x0000000078d3efff] reserved
BIOS-e820: [mem 0x0000000078d3f000-0x0000000078d55fff] usable
BIOS-e820: [mem 0x0000000078d56000-0x0000000078d5bfff] reserved
BIOS-e820: [mem 0x0000000078d5c000-0x0000000078d5dfff] usable
BIOS-e820: [mem 0x0000000078d5e000-0x0000000078d67fff] reserved
BIOS-e820: [mem 0x0000000078d68000-0x0000000078efbfff] usable
BIOS-e820: [mem 0x0000000078efc000-0x0000000078efffff] reserved
BIOS-e820: [mem 0x0000000078f00000-0x0000000078f49fff] usable
BIOS-e820: [mem 0x0000000078f4a000-0x0000000078f50fff] reserved
BIOS-e820: [mem 0x0000000078f51000-0x0000000078f52fff] usable
BIOS-e820: [mem 0x0000000078f53000-0x0000000078f70fff] reserved
BIOS-e820: [mem 0x0000000078f71000-0x0000000078f73fff] usable
BIOS-e820: [mem 0x0000000078f74000-0x0000000078f75fff] reserved
BIOS-e820: [mem 0x0000000078f76000-0x0000000078f8cfff] usable
BIOS-e820: [mem 0x0000000078f8d000-0x0000000078f92fff] reserved
BIOS-e820: [mem 0x0000000078f93000-0x0000000078f9afff] usable
BIOS-e820: [mem 0x0000000078f9b000-0x0000000078f9bfff] reserved
BIOS-e820: [mem 0x0000000078f9c000-0x0000000078faafff] usable
BIOS-e820: [mem 0x0000000078fab000-0x0000000078fabfff] reserved
BIOS-e820: [mem 0x0000000078fac000-0x0000000078fb6fff] usable
BIOS-e820: [mem 0x0000000078fb7000-0x0000000078fbbfff] reserved
BIOS-e820: [mem 0x0000000078fbc000-0x0000000078feffff] usable
BIOS-e820: [mem 0x0000000078ff0000-0x0000000078ff0fff] reserved
BIOS-e820: [mem 0x0000000078ff1000-0x0000000079000fff] usable
BIOS-e820: [mem 0x0000000079001000-0x0000000079027fff] reserved
BIOS-e820: [mem 0x0000000079028000-0x000000007903bfff] usable
BIOS-e820: [mem 0x000000007903c000-0x000000007903cfff] reserved
BIOS-e820: [mem 0x000000007903d000-0x000000007903dfff] usable
BIOS-e820: [mem 0x000000007903e000-0x000000007903ffff] reserved
BIOS-e820: [mem 0x0000000079040000-0x0000000079040fff] usable
BIOS-e820: [mem 0x0000000079041000-0x0000000079045fff] reserved
BIOS-e820: [mem 0x0000000079046000-0x000000007905afff] usable
BIOS-e820: [mem 0x000000007905b000-0x0000000079622fff] reserved
BIOS-e820: [mem 0x0000000079623000-0x00000000798a2fff] ACPI NVS
BIOS-e820: [mem 0x00000000798a3000-0x00000000798a7fff] ACPI data
BIOS-e820: [mem 0x00000000798a8000-0x00000000798a8fff] usable
BIOS-e820: [mem 0x00000000798a9000-0x00000000798ebfff] ACPI NVS
BIOS-e820: [mem 0x00000000798ec000-0x0000000079d01fff] usable
BIOS-e820: [mem 0x0000000079d02000-0x0000000079ff3fff] reserved
BIOS-e820: [mem 0x0000000079ff4000-0x0000000079ffffff] usable
BIOS-e820: [mem 0x000000007ac00000-0x000000007edfffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001001fffff] usable
NX (Execute Disable) protection: active
DMI 2.7 present.
DMI: ASUSTeK COMPUTER INC. X202EP/X202EP, BIOS X202EP.201 09/10/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x100200 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 100000000 mask FFFE00000 write-back
2 base 080000000 mask F80000000 uncachable
3 base 07C000000 mask FFC000000 uncachable
4 base 07B000000 mask FFF000000 uncachable
5 base 07AC00000 mask FFFC00000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 4GB, range: 2MB, type WB
reg 2, base: 2GB, range: 2GB, type UC
reg 3, base: 1984MB, range: 64MB, type UC
reg 4, base: 1968MB, range: 16MB, type UC
reg 5, base: 1964MB, range: 4MB, type UC
total RAM covered: 1966M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 1964MB, range: 4MB, type UC
reg 2, base: 1968MB, range: 16MB, type UC
reg 3, base: 1984MB, range: 64MB, type UC
reg 4, base: 4GB, range: 2MB, type WB
e820: update [mem 0x7ac00000-0xffffffff] usable ==> reserved
found SMP MP-table at [mem 0x000fd7b0-0x000fd7bf] mapped at [c00fd7b0]
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c0099000] 99000 size 16384
init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[mem 0x00000000-0x001fffff] page 4k
[mem 0x00200000-0x379fffff] page 2M
[mem 0x37a00000-0x37bfdfff] page 4k
kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
RAMDISK: [mem 0x77714000-0x7872cfff]
Allocated new RAMDISK: [mem 0x36be5000-0x37bfdeff]
Move RAMDISK from [mem 0x77714000-0x7872ceff] to [mem 0x36be5000-0x37bfdeff]
ACPI: RSDP 000f0490 00024 (v02 _ASUS_)
ACPI: XSDT 79877078 0007C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI: FACP 79888e78 0010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI: DSDT 79877188 11CED (v02 _ASUS_ Notebook 00000013 INTL 20091112)
ACPI: FACS 798a0080 00040
ACPI: APIC 79888f88 00062 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI: FPDT 79888ff0 00044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI: ECDT 79889038 000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
ACPI: MCFG 79889100 0003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
ACPI: HPET 79889140 00038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
ACPI: SSDT 79889178 004A0 (v01 AhciR1 AhciTab1 00001000 INTL 20091112)
ACPI: SSDT 79889618 0049E (v01 AhciR2 AhciTab2 00001000 INTL 20091112)
ACPI: SSDT 79889ab8 006B8 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 7988a170 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: MSDM 79622e18 00055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
ACPI: Local APIC address 0xfee00000
3206MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x001fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x3fffffff]
node 0: [mem 0x40200000-0x7872cfff]
node 0: [mem 0x7872e000-0x7873afff]
node 0: [mem 0x78d3f000-0x78d55fff]
node 0: [mem 0x78d5c000-0x78d5dfff]
node 0: [mem 0x78d68000-0x78efbfff]
node 0: [mem 0x78f00000-0x78f49fff]
node 0: [mem 0x78f51000-0x78f52fff]
node 0: [mem 0x78f71000-0x78f73fff]
node 0: [mem 0x78f76000-0x78f8cfff]
node 0: [mem 0x78f93000-0x78f9afff]
node 0: [mem 0x78f9c000-0x78faafff]
node 0: [mem 0x78fac000-0x78fb6fff]
node 0: [mem 0x78fbc000-0x78feffff]
node 0: [mem 0x78ff1000-0x79000fff]
node 0: [mem 0x79028000-0x7903bfff]
node 0: [mem 0x7903d000-0x7903dfff]
node 0: [mem 0x79040000-0x79040fff]
node 0: [mem 0x79046000-0x7905afff]
node 0: [mem 0x798a8000-0x798a8fff]
node 0: [mem 0x798ec000-0x79d01fff]
node 0: [mem 0x79ff4000-0x79ffffff]
node 0: [mem 0x00000000-0x001fffff]
On node 0 totalpages: 494478
free_area_init_node: node 0, pgdat c18a0840, node_mem_map f4bdc200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3949 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 221990 pages, LIFO batch:31
HighMem zone: 6413 pages used for memmap
HighMem zone: 260342 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
e820: [mem 0x7ee00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f4bad000 s34176 r0 d23168 u57344
pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 486281
Kernel command line: bootkbd=us console-setup/layoutcode=en_US console-setup/variantcode=nodeadkeys locale=us_us persistent noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz splash -- maybe-ubiquity
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
allocated 8392576 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:00100200)
Memory: 1908828k/4196352k available (5956k kernel code, 69084k reserved, 2928k data, 756k init, 1067020k highmem)
virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc18ae000 - 0xc196b000 ( 756 kB)
.data : 0xc15d1358 - 0xc18ad6c0 (2928 kB)
.text : 0xc1000000 - 0xc15d1358 (5956 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f3c08000 soft=f3c0a000
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1097.533 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 2195.06 BogoMIPS (lpj=4390132)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 24585 entries in 49 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Celeron(R) CPU 847 @ 1.10GHz stepping 07
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU 1 irqstacks, hard=f3d02000 soft=f3d04000
Booting Node 0, Processors #1 Ok.
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (4390.13 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x7873b000-0x78d3bfff] (6295552 bytes)
PM: Registering ACPI NVS region [mem 0x79623000-0x798a2fff] (2621440 bytes)
PM: Registering ACPI NVS region [mem 0x798a9000-0x798ebfff] (274432 bytes)
dummy:
RTC time: 13:00:07, date: 03/18/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
EISA bus registered
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: EC description table is found, configuring boot EC
ACPI: Executed 1 blocks of module-level executable AML code
CPU1: Core power limit notification (total events = 1)
CPU0: Core power limit notification (total events = 1)
CPU0: Package power limit notification (total events = 1)
CPU1: Package power limit notification (total events = 1)
CPU1: Core power limit normal
CPU0: Core power limit normal
CPU0: Package power limit normal
CPU1: Package power limit normal
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 795d0018 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 795d1a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 795d2c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: >host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: >host bridge window [mem 0x7ee00000-0xfeafffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: >root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: >root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: >root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: >root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: >root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: >root bus resource [mem 0x7ee00000-0xfeafffff]
pci 0000:00:00.0: >[8086:0104] type 00 class 0x060000
pci 0000:00:02.0: >[8086:0106] type 00 class 0x030000
pci 0000:00:02.0: >reg 10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: >reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: >reg 20: [io 0xf000-0xf03f]
pci 0000:00:14.0: >[8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: >reg 10: [mem 0xf7e00000-0xf7e0ffff 64bit]
pci 0000:00:14.0: >PME# supported from D3hot D3cold
pci 0000:00:16.0: >[8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: >reg 10: [mem 0xf7e1a000-0xf7e1a00f 64bit]
pci 0000:00:16.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: >[8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: >reg 10: [mem 0xf7e18000-0xf7e183ff]
pci 0000:00:1a.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: >[8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: >reg 10: [mem 0xf7e10000-0xf7e13fff 64bit]
pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: >[8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: >[8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: >[8086:1e16] type 01 class 0x060400
pci 0000:00:1c.3: >PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: >[8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: >reg 10: [mem 0xf7e17000-0xf7e173ff]
pci 0000:00:1d.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: >[8086:1e5e] type 00 class 0x060100
pci 0000:00:1f.2: >[8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: >reg 10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: >reg 14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: >reg 18: [io 0xf090-0xf097]
pci 0000:00:1f.2: >reg 1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: >reg 20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: >reg 24: [mem 0xf7e16000-0xf7e167ff]
pci 0000:00:1f.2: >PME# supported from D3hot
pci 0000:00:1f.3: >[8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: >reg 10: [mem 0xf7e15000-0xf7e150ff 64bit]
pci 0000:00:1f.3: >reg 20: [io 0xf040-0xf05f]
pci 0000:00:1c.0: >PCI bridge to [bus 01-01]
pci 0000:02:00.0: >[168c:0032] type 00 class 0x028000
pci 0000:02:00.0: >reg 10: [mem 0xf7d00000-0xf7d7ffff 64bit]
pci 0000:02:00.0: >reg 30: [mem 0xf7d80000-0xf7d8ffff pref]
pci 0000:02:00.0: >supports D1 D2
pci 0000:02:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.1: >PCI bridge to [bus 02-02]
pci 0000:00:1c.1: > bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:03:00.0: >[1969:1090] type 00 class 0x020000
pci 0000:03:00.0: >reg 10: [mem 0xf7c00000-0xf7c3ffff 64bit]
pci 0000:03:00.0: >reg 18: [io 0xe000-0xe07f]
pci 0000:03:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: >PCI bridge to [bus 03-03]
pci 0000:00:1c.3: > bridge window [io 0xe000-0xefff]
pci 0000:00:1c.3: > bridge window [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:00: >on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
pci0000:00: >Requesting ACPI _OSC control (0x1d)
pci0000:00: >ACPI _OSC control (0x18) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0x7872d000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7873b000-0x7bffffff]
e820: reserve RAM buffer [mem 0x78d56000-0x7bffffff]
e820: reserve RAM buffer [mem 0x78d5e000-0x7bffffff]
e820: reserve RAM buffer [mem 0x78efc000-0x7bffffff]
e820: reserve RAM buffer [mem 0x78f4a000-0x7bffffff]
e820: reserve RAM buffer [mem 0x78f53000-0x7bffffff]
e820: reserve RAM buffer [mem 0x78f74000-0x7bffffff]
e820: reserve RAM buffer [mem 0x78f8d000-0x7bffffff]
e820: reserve RAM buffer [mem 0x78f9b000-0x7bffffff]
e820: reserve RAM buffer [mem 0x78fab000-0x7bffffff]
e820: reserve RAM buffer [mem 0x78fb7000-0x7bffffff]
e820: reserve RAM buffer [mem 0x78ff0000-0x7bffffff]
e820: reserve RAM buffer [mem 0x79001000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7903c000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7903e000-0x7bffffff]
e820: reserve RAM buffer [mem 0x79041000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7905b000-0x7bffffff]
e820: reserve RAM buffer [mem 0x798a9000-0x7bffffff]
e820: reserve RAM buffer [mem 0x79d02000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
e820: reserve RAM buffer [mem 0x100200000-0x103ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-3e]
pnp 00:00: >[io 0x0000-0x0cf7 window]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000c0000-0x000c3fff window]
pnp 00:00: >[mem 0x000c4000-0x000c7fff window]
pnp 00:00: >[mem 0x000c8000-0x000cbfff window]
pnp 00:00: >[mem 0x000cc000-0x000cffff window]
pnp 00:00: >[mem 0x000d0000-0x000d3fff window]
pnp 00:00: >[mem 0x000d4000-0x000d7fff window]
pnp 00:00: >[mem 0x000d8000-0x000dbfff window]
pnp 00:00: >[mem 0x000dc000-0x000dffff window]
pnp 00:00: >[mem 0x000e0000-0x000e3fff window]
pnp 00:00: >[mem 0x000e4000-0x000e7fff window]
pnp 00:00: >[mem 0x000e8000-0x000ebfff window]
pnp 00:00: >[mem 0x000ec000-0x000effff window]
pnp 00:00: >[mem 0x000f0000-0x000fffff window]
pnp 00:00: >[mem 0x7ee00000-0xfeafffff window]
pnp 00:00: >[mem 0x00010000-0x0001ffff window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: >[mem 0xfed40000-0xfed44fff]
system 00:01: >[mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: >[io 0x0000-0x001f]
pnp 00:02: >[io 0x0081-0x0091]
pnp 00:02: >[io 0x0093-0x009f]
pnp 00:02: >[io 0x00c0-0x00df]
pnp 00:02: >[dma 4]
pnp 00:02: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: >[mem 0xff000000-0xffffffff]
pnp 00:03: >Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:04: >[mem 0xfed00000-0xfed003ff]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: >[io 0x002e-0x002f]
pnp 00:05: >[io 0x004e-0x004f]
pnp 00:05: >[io 0x0061]
pnp 00:05: >[io 0x0063]
pnp 00:05: >[io 0x0065]
pnp 00:05: >[io 0x0067]
pnp 00:05: >[io 0x0070]
pnp 00:05: >[io 0x0080]
pnp 00:05: >[io 0x0092]
pnp 00:05: >[io 0x00b2-0x00b3]
pnp 00:05: >[io 0x0680-0x069f]
pnp 00:05: >[io 0x1000-0x100f]
pnp 00:05: >[io 0xffff]
pnp 00:05: >[io 0xffff]
pnp 00:05: >[io 0x0400-0x0453]
pnp 00:05: >[io 0x0458-0x047f]
pnp 00:05: >[io 0x0500-0x057f]
pnp 00:05: >[io 0x164e-0x164f]
system 00:05: >[io 0x0680-0x069f] has been reserved
system 00:05: >[io 0x1000-0x100f] has been reserved
system 00:05: >[io 0xffff] has been reserved
system 00:05: >[io 0xffff] has been reserved
system 00:05: >[io 0x0400-0x0453] has been reserved
system 00:05: >[io 0x0458-0x047f] has been reserved
system 00:05: >[io 0x0500-0x057f] has been reserved
system 00:05: >[io 0x164e-0x164f] has been reserved
system 00:05: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: >[io 0x0070-0x0077]
pnp 00:06: >[irq 8]
pnp 00:06: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: >[io 0x0454-0x0457]
system 00:07: >[io 0x0454-0x0457] has been reserved
system 00:07: >Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:08: >[io 0x0010-0x001f]
pnp 00:08: >[io 0x0022-0x003f]
pnp 00:08: >[io 0x0044-0x005f]
pnp 00:08: >[io 0x0072-0x007f]
pnp 00:08: >[io 0x0080]
pnp 00:08: >[io 0x0084-0x0086]
pnp 00:08: >[io 0x0088]
pnp 00:08: >[io 0x008c-0x008e]
pnp 00:08: >[io 0x0090-0x009f]
pnp 00:08: >[io 0x00a2-0x00bf]
pnp 00:08: >[io 0x00e0-0x00ef]
pnp 00:08: >[io 0x04d0-0x04d1]
system 00:08: >[io 0x04d0-0x04d1] has been reserved
system 00:08: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: >[io 0x00f0-0x00ff]
pnp 00:09: >[irq 13]
pnp 00:09: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0a: >[io 0x0240-0x0259]
system 00:0a: >[io 0x0240-0x0259] has been reserved
system 00:0a: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: >[irq 12]
pnp 00:0b: >Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
pnp 00:0c: >[io 0x0060]
pnp 00:0c: >[io 0x0064]
pnp 00:0c: >[irq 1]
pnp 00:0c: >Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
pnp 00:0d: >[mem 0xfed1c000-0xfed1ffff]
pnp 00:0d: >[mem 0xfed10000-0xfed17fff]
pnp 00:0d: >[mem 0xfed18000-0xfed18fff]
pnp 00:0d: >[mem 0xfed19000-0xfed19fff]
pnp 00:0d: >[mem 0xf8000000-0xfbffffff]
pnp 00:0d: >[mem 0xfed20000-0xfed3ffff]
pnp 00:0d: >[mem 0xfed90000-0xfed93fff]
pnp 00:0d: >[mem 0xfed45000-0xfed8ffff]
pnp 00:0d: >[mem 0xff000000-0xffffffff]
pnp 00:0d: >[mem 0xfee00000-0xfeefffff]
pnp 00:0d: >[mem 0x7ee00000-0x7ee00fff]
system 00:0d: >[mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0d: >[mem 0xfed10000-0xfed17fff] has been reserved
system 00:0d: >[mem 0xfed18000-0xfed18fff] has been reserved
system 00:0d: >[mem 0xfed19000-0xfed19fff] has been reserved
system 00:0d: >[mem 0xf8000000-0xfbffffff] has been reserved
system 00:0d: >[mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0d: >[mem 0xfed90000-0xfed93fff] has been reserved
system 00:0d: >[mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0d: >[mem 0xff000000-0xffffffff] has been reserved
system 00:0d: >[mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0d: >[mem 0x7ee00000-0x7ee00fff] has been reserved
system 00:0d: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: >[mem 0x7ee00000-0x7ee00fff]
system 00:0e: >[mem 0x7ee00000-0x7ee00fff] has been reserved
system 00:0e: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0f: >[mem 0x20000000-0x201fffff]
pnp 00:0f: >[mem 0x40000000-0x401fffff]
system 00:0f: >[mem 0x20000000-0x201fffff] has been reserved
system 00:0f: >[mem 0x40000000-0x401fffff] has been reserved
system 00:0f: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:1c.0: >PCI bridge to [bus 01-01]
pci 0000:00:1c.1: >PCI bridge to [bus 02-02]
pci 0000:00:1c.1: > bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.3: >PCI bridge to [bus 03-03]
pci 0000:00:1c.3: > bridge window [io 0xe000-0xefff]
pci 0000:00:1c.3: > bridge window [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: >resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: >resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: >resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: >resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: >resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: >resource 13 [mem 0x7ee00000-0xfeafffff]
pci_bus 0000:02: >resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:03: >resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: >resource 1 [mem 0xf7c00000-0xf7cfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: >Boot video device
PCI: CLS 64 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1363611613.100:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 1644
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC0] (off-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
ACPI: Requesting acpi_cpufreq
Freeing initrd memory: 16484k freed
thermal LNXTHERM:00: >registered as thermal_zone0
ACPI: Thermal Zone [THRM] (77 C)
ACPI: Battery Slot [BAT0] (battery present)
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: >version 3.0
ahci 0000:00:1f.2: >irq 40 for MSI/MSI-X
ahci 0000:00:1f.2: >AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: >flags: 64bit ncq pm led clo pio slum part ems apst
ahci 0000:00:1f.2: >setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16100 irq 40
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: >setting latency timer to 64
ehci_hcd 0000:00:1a.0: >EHCI Host Controller
ehci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: >debug port 2
ehci_hcd 0000:00:1a.0: >cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: >irq 16, io mem 0xf7e18000
ehci_hcd 0000:00:1a.0: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb1: >SerialNumber: 0000:00:1a.0
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >2 ports detected
ehci_hcd 0000:00:1d.0: >setting latency timer to 64
ehci_hcd 0000:00:1d.0: >EHCI Host Controller
ehci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: >debug port 2
ehci_hcd 0000:00:1d.0: >cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: >irq 23, io mem 0xf7e17000
ehci_hcd 0000:00:1d.0: >USB 2.0 started, EHCI 1.00
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: EHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb2: >SerialNumber: 0000:00:1d.0
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: >setting latency timer to 64
xhci_hcd 0000:00:14.0: >xHCI Host Controller
xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: >cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: >irq 16, io mem 0xf7e00000
xhci_hcd 0000:00:14.0: >irq 41 for MSI/MSI-X
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: xHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb3: >SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >4 ports detected
xhci_hcd 0000:00:14.0: >xHCI Host Controller
xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 4
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: xHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb4: >SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >4 ports detected
ACPI: Battery Slot [BAT0] (battery present)
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: >RTC can wake from S4
rtc_cmos 00:06: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 5:672:28
rtc_cmos 00:06: >setting system clock to 2013-03-18 13:00:15 UTC (1363611615)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Refined TSC clocksource calibration: 1097.506 MHz.
Switching to clocksource tsc
isapnp: No Plug & Play device found
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
usb 1-1: >new high-speed USB device number 2 using ehci_hcd
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
usb 1-1: >New USB device found, idVendor=8087, idProduct=0024
usb 1-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: >USB hub found
hub 1-1:1.0: >4 ports detected
usb 2-1: >new high-speed USB device number 2 using ehci_hcd
ata1.00: ATA-8: ST500LT012-9WS142, 0001SDM1, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: >Direct-Access ATA ST500LT012-9WS14 0001 PQ: 0 ANSI: 5
sd 0:0:0:0: >Attached scsi generic sg0 type 0
sd 0:0:0:0: >[sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: >[sda] 4096-byte physical blocks
sd 0:0:0:0: >[sda] Write Protect is off
sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5 sda6
sd 0:0:0:0: >[sda] Attached SCSI disk
Freeing unused kernel memory: 756k freed
Write protecting the kernel text: 5960k
Write protecting the kernel read-only data: 2424k
NX-protecting the kernel data: 4280k
usb 2-1: >New USB device found, idVendor=8087, idProduct=0024
usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: >USB hub found
hub 2-1:1.0: >4 ports detected
udevd[101]: starting version 175
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
usb 3-2: >new high-speed USB device number 2 using xhci_hcd
i915 0000:00:02.0: >setting latency timer to 64
pci 0000:00:00.0: >Intel Sandybridge Chipset
pci 0000:00:00.0: >detected gtt size: 2097152K total, 262144K mappable
pci 0000:00:00.0: >detected 65536K stolen memory
i915 0000:00:02.0: >irq 42 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
usb 3-2: >New USB device found, idVendor=090c, idProduct=1000
usb 3-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: >Product: Mass Storage Device
usb 3-2: >Manufacturer: JetFlash
usb 3-2: >SerialNumber: ASHQ9YX86GJGXYBI
usb 3-2: >ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
usb 3-2: >ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
Initializing USB Mass Storage driver...
scsi4 : usb-storage 3-2:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver uas
usb 1-1.1: >new full-speed USB device number 3 using ehci_hcd
usb 1-1.1: >New USB device found, idVendor=04ca, idProduct=3005
usb 1-1.1: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: >Product: Bluetooth USB Host Controller
usb 1-1.1: >Manufacturer: Atheros Communications
usb 1-1.1: >SerialNumber: Alaska Day 2006
usb 1-1.2: >new high-speed USB device number 4 using ehci_hcd
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
usb 1-1.2: >New USB device found, idVendor=13d3, idProduct=5188
usb 1-1.2: >New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-1.2: >Product: USB2.0 UVC HD Webcam
usb 1-1.2: >Manufacturer: Azurewave
usb 1-1.2: >SerialNumber: NULL
fbcon: inteldrmfb (fb0) is primary device
usb 1-1.3: >new full-speed USB device number 5 using ehci_hcd
usb 1-1.3: >New USB device found, idVendor=03eb, idProduct=8417
usb 1-1.3: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: >Product: Atmel maXTouch Digitizer
usb 1-1.3: >Manufacturer: Atmel
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
hid-generic 0003:03EB:8417.0002: >hiddev0,hidraw0: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1a.0-1.3/input1
Console: switching to colour frame buffer device 170x48
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
ACPI Error: Current brightness invalid (20120320/video-384)
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
scsi 4:0:0:0: >Direct-Access JetFlash Transcend 16GB 1100 PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: >Attached scsi generic sg1 type 0
sd 4:0:0:0: >[sdb] 31326208 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 4:0:0:0: >[sdb] Write Protect is off
sd 4:0:0:0: >[sdb] Mode Sense: 43 00 00 00
sd 4:0:0:0: >[sdb] No Caching mode page present
sd 4:0:0:0: >[sdb] Assuming drive cache: write through
sd 4:0:0:0: >[sdb] No Caching mode page present
sd 4:0:0:0: >[sdb] Assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: >[sdb] No Caching mode page present
sd 4:0:0:0: >[sdb] Assuming drive cache: write through
sd 4:0:0:0: >[sdb] Attached SCSI removable disk
xor: automatically using best checksumming function:
pIII_sse : 4938.000 MB/sec
device-mapper: dm-raid45: initialized v0.2594b
squashfs: version 4.0 (2009/01/31) Phillip Lougher
EXT2-fs (loop1): warning: mounting unchecked fs, running e2fsck is recommended
udevd[4292]: starting version 175
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
mei 0000:00:16.0: >setting latency timer to 64
mei 0000:00:16.0: >irq 43 for MSI/MSI-X
mei 0000:00:16.0: >wd: failed to find the client
input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input5
hid-multitouch 0003:03EB:8417.0001: >input,hiddev0,hidraw1: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1a.0-1.3/input0
cfg80211: Calling CRDA to update world regulatory domain
ACPI Warning: 0x00000460-0x0000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \GPIS 1 (20120320/utaddress-251)
ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 2 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000500-0x0000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
ACPI Warning: 0x00000500-0x0000053f SystemIO conflicts with Region \GP01 2 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
usbcore: registered new interface driver btusb
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
usbcore: registered new interface driver ath3k
device-mapper: multipath: version 1.4.0 loaded
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x1asus_wmi: BIOS WMI version: 7.9
asus_wmi: SFUN value: 0x4a0877[ 161.531413] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input6
microcode: Microcode Update Driver: v2.00 , Peter Oruba
asus_wmi: Backlight controlled by ACPI video driver
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device USB2.0 UVC HD Webcam (13d3:5188)
input: USB2.0 UVC HD Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
init: failsafe main process (4519) killed by TERM signal
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
psmouse serio4: >elantech: assuming hardware version 4 (with firmware version 0x361f01)
psmouse serio4: >elantech: Synaptics capabilities query result 0x00, 0x15, 0x0c.
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input8
ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0
ieee80211 phy0: >Atheros AR9485 Rev:1 mem=0xf9480000, irq=17
snd_hda_intel 0000:00:1b.0: >irq 44 for MSI/MSI-X
init: alsa-restore main process (4742) terminated with status 19
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
usb 1-1.1: >USB disconnect, device number 3
cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
wlan0: authenticate with 00:26:91:dc:e5:f7
wlan0: send auth to 00:26:91:dc:e5:f7 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:26:91:dc:e5:f7 (try 1/3)
wlan0: RX AssocResp from 00:26:91:dc:e5:f7 (capab=0x431 status=0 aid=4)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: GB
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Disabling freq 2484 MHz
ath: regdomain 0x833a updated by CountryIE
ath: EEPROM regdomain: 0x833a
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: GB
ath: Regpair used: 0x37
cfg80211: Regulatory domain changed to country: GB
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0