dmesg - 1800new3400
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-13-generic (buildd@panlong) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-22ubuntu4) ) #22-Ubuntu SMP Fri Mar 15 17:51:30 UTC 2013 (Ubuntu 3.8.0-13.22-generic 3.8.3)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003ffebfff] usable
BIOS-e820: [mem 0x000000003ffec000-0x000000003ffeefff] ACPI data
BIOS-e820: [mem 0x000000003ffef000-0x000000003fffefff] reserved
BIOS-e820: [mem 0x000000003ffff000-0x000000003fffffff] ACPI NVS
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
Notice: NX (Execute Disable) protection missing in CPU!
SMBIOS 2.3 present.
DMI: System Manufacturer System Name/P4PE-X/TE, BIOS ASUS P4PE-X/TE ACPI BIOS Revision 1009 Beta 004 08/09/2005
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x3ffec max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 base 0FE000000 mask FFFC00000 write-combining
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[mem 0x00000000-0x001fffff] page 4k
[mem 0x00200000-0x379fffff] page 2M
[mem 0x37a00000-0x37bfdfff] page 4k
kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
RAMDISK: [mem 0x3616a000-0x370acfff]
ACPI: RSDP 000f51f0 00014 (v00 ASUS )
ACPI: RSDT 3ffec000 00030 (v01 ASUS P4PE-XTE 42302E31 MSFT 31313031)
ACPI: FACP 3ffec0c0 00074 (v01 ASUS P4PE-XTE 42302E31 MSFT 31313031)
ACPI: DSDT 3ffec134 02A43 (v01 ASUS P4PE-XTE 00001000 MSFT 0100000B)
ACPI: FACS 3ffff000 00040
ACPI: BOOT 3ffec030 00028 (v01 ASUS P4PE-XTE 42302E31 MSFT 31313031)
ACPI: APIC 3ffec058 0005A (v01 ASUS P4PE-XTE 42302E31 MSFT 31313031)
ACPI: Local APIC address 0xfee00000
131MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x3ffebfff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0x3ffebfff]
On node 0 totalpages: 262011
free_area_init_node: node 0, pgdat c18f6140, node_mem_map f73fd200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 264 pages used for memmap
HighMem zone: 33510 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0xe408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
e820: [mem 0x40000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f73e8000 s35008 r0 d22336 u57344
pcpu-alloc: s35008 r0 d22336 u57344 alloc=14*4096
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259963
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
allocated 2096864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0003ffec)
Memory: 1010304k/1048496k available (6249k kernel code, 37740k reserved, 2976k data, 784k init, 135096k highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1903000 - 0xc19c7000 ( 784 kB)
.data : 0xc161a4b0 - 0xc19024c0 (2976 kB)
.text : 0xc1000000 - 0xc161a4b0 (6249 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
NR_IRQS:2304 nr_irqs:256 16
CPU 0 irqstacks, hard=f5c06000 soft=f5c08000
Console: colour dummy device 80x25
console [tty0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 3402.070 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6804.14 BogoMIPS (lpj=13608280)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU0: Hyper-Threading is disabled
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
tlb_flushall_shift: 6
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26106 entries in 51 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 1.80GHz (fam: 0f, model: 02, stepping: 07)
Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
... version: 0
... bit width: 40
... generic registers: 18
... value mask: 000000ffffffffff
... max period: 0000007fffffffff
... fixed-purpose events: 0
... event mask: 000000000003ffff
Brought up 1 CPUs
smpboot: Total of 1 processors activated (6804.14 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x3ffff000-0x3fffffff] (4096 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf1e10, last bus=2
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci_root PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci_root PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
PCI: root bus 00: using default resources
pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:00.0: [8086:2560] type 00 class 0x060000
pci 0000:00:00.0: reg 10: [mem 0xfe000000-0xfe3fffff pref]
pci 0000:00:01.0: [8086:2561] type 01 class 0x060400
pci 0000:00:1d.0: [8086:24c2] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io 0xd800-0xd81f]
pci 0000:00:1d.1: [8086:24c4] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io 0xd400-0xd41f]
pci 0000:00:1d.2: [8086:24c7] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io 0xd000-0xd01f]
pci 0000:00:1d.7: [8086:24cd] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xf5800000-0xf58003ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400
pci 0000:00:1f.0: [8086:24c0] type 00 class 0x060100
* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this clock source is slow. If you are sure your timer does not have
* this bug, please use "acpi_pm_good" to disable the workaround
pci 0000:00:1f.0: Enabled i801 SMBus device
pci 0000:00:1f.0: quirk: [io 0xe400-0xe47f] claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0xec00-0xec3f] claimed by ICH4 GPIO
pci 0000:00:1f.1: [8086:24cb] type 00 class 0x01018a
pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io 0xf000-0xf00f]
pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
pci 0000:00:1f.3: [8086:24c3] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 20: [io 0xe800-0xe81f]
pci 0000:00:1f.5: [8086:24c5] type 00 class 0x040100
pci 0000:00:1f.5: reg 10: [io 0xa800-0xa8ff]
pci 0000:00:1f.5: reg 14: [io 0xa400-0xa43f]
pci 0000:00:1f.5: reg 18: [mem 0xf4800000-0xf48001ff]
pci 0000:00:1f.5: reg 1c: [mem 0xf4000000-0xf40000ff]
pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: [10de:0181] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 14: [mem 0xf8000000-0xfbffffff pref]
pci 0000:01:00.0: reg 30: [mem 0xf7fe0000-0xf7ffffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf7efffff]
pci 0000:00:01.0: bridge window [mem 0xf7f00000-0xfdffffff pref]
pci 0000:02:05.0: [10ec:8139] type 00 class 0x020000
pci 0000:02:05.0: reg 10: [io 0xb800-0xb8ff]
pci 0000:02:05.0: reg 14: [mem 0xf5000000-0xf50000ff]
pci 0000:02:05.0: supports D1 D2
pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:1e.0: bridge window [mem 0xf5000000-0xf57fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x3ffec000-0x3fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource refined-jiffies
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0x3fffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfec000ff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0xe400-0xe47f] has been reserved
system 00:01: [io 0xe800-0xe81f] has been reserved
system 00:01: [io 0xec00-0xec3f] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [mem 0xfff80000-0xffffffff] could not be reserved
system 00:01: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [dma 2]
pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
system 00:0a: [io 0x03f0-0x03f1] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
Switching to clocksource acpi_pm
pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf7efffff]
pci 0000:00:01.0: bridge window [mem 0xf7f00000-0xfdffffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 02]
pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:1e.0: bridge window [mem 0xf5000000-0xf57fffff]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf7efffff]
pci_bus 0000:01: resource 2 [mem 0xf7f00000-0xfdffffff pref]
pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:02: resource 1 [mem 0xf5000000-0xf57fffff]
pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15628k freed
Simple Boot Flag at 0x3a set to 0x1
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1363514465.499:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 1739
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
processor LNXCPU:00: Invalid PBLK length [5]
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 845G Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 4M @ 0xfe000000
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf5800000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-13-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d800
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-13-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d400
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-13-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-13-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 1b0a06741bf79c2ff66ffbd799edea312c233103'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:04: setting system clock to 2013-03-17 10:01:06 UTC (1363514466)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
isapnp: No Plug & Play device found
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
ata2.00: ATAPI: ASUS CRW-5232AS, 1.03, max UDMA/33
ata1.00: ATA-6: ST340014A, 3.06, max UDMA/100
ata1.00: 78165360 sectors, multi 16: LBA48
ata2.00: configured for UDMA/33
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA ST340014A 3.06 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: CD-ROM ASUS CRW-5232AS 1.03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 784k freed
Write protecting the kernel text: 6252k
Write protecting the kernel read-only data: 2432k
udevd[94]: starting version 175
usb 1-3: new high-speed USB device number 2 using ehci-pci
Disabling lock debugging due to kernel taint
Floppy drive(s): fd0 is 1.44M
8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:02:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
8139too: 8139too Fast Ethernet driver 0.9.28
FDC 0 is a post-1991 82077
8139too 0000:02:05.0 eth0: RealTek RTL8139 at 0x0001b800, 00:0e:a6:2f:1d:ac, IRQ 20
usb 1-3: New USB device found, idVendor=046d, idProduct=0825
usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=2
usb 1-3: SerialNumber: DCDE45D0
tsc: Refined TSC clocksource calibration: 3402.000 MHz
Switching to clocksource tsc
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[301]: starting version 175
lp: driver loaded but no devices found
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
intel_rng: FWH not detected
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized
ppdev: user-space parallel port driver
type=1400 audit(1363500083.371:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=536 comm="apparmor_parser"
type=1400 audit(1363500083.371:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=536 comm="apparmor_parser"
Linux video capture interface: v2.00
type=1400 audit(1363500083.463:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=553 comm="apparmor_parser"
type=1400 audit(1363500083.467:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=553 comm="apparmor_parser"
type=1400 audit(1363500083.471:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=553 comm="apparmor_parser"
type=1400 audit(1363500083.475:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=556 comm="apparmor_parser"
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16042 buckets, 64168 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
[drm] Initialized drm 1.1.0 20060810
uvcvideo: Found UVC 1.00 device (046d:0825)
microcode: CPU0 sig=0xf27, pf=0x4, revision=0x37
input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input3
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
wmi: Mapper loaded
snd_intel8x0 0000:00:1f.5: setting latency timer to 64
nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x018100c1
nouveau [ DEVICE][0000:01:00.0] Chipset: NV18 (NV18)
nouveau [ DEVICE][0000:01:00.0] Family : NV10
nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
nouveau [ VBIOS][0000:01:00.0] BMP version 5.28
nouveau [ VBIOS][0000:01:00.0] version 04.18.20.38.00
init: failsafe main process (727) killed by TERM signal
nouveau W[ PTIMER][0000:01:00.0] unknown input clock freq
nouveau [ PFB][0000:01:00.0] RAM type: DDR1
nouveau [ PFB][0000:01:00.0] RAM size: 64 MiB
nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
agpgart-intel 0000:00:00.0: AGP 2.0 bridge
agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[TTM] Zone kernel: Available graphics memory: 445822 kiB
[TTM] Zone highmem: Available graphics memory: 513370 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 63 MiB
nouveau [ DRM] GART: 4 MiB
nouveau [ DRM] BMP BIOS found
nouveau [ DRM] BMP version 5.40
nouveau [ DRM] Bios version 04.18.20.38
nouveau [ DRM] DCB version 2.2
nouveau [ DRM] DCB outp 00: 01000300 000088b8
nouveau [ DRM] DCB outp 01: 02010321 00000033
nouveau [ DRM] Loading NV17 power sequencing microcode
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
type=1400 audit(1363500084.859:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=826 comm="apparmor_parser"
type=1400 audit(1363500084.859:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=826 comm="apparmor_parser"
type=1400 audit(1363500084.883:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=827 comm="apparmor_parser"
type=1400 audit(1363500084.883:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=827 comm="apparmor_parser"
nouveau [ DRM] 0 available performance level(s)
nouveau [ DRM] c: core 274MHz memory 199MHz
nouveau [ DRM] MM: using M2MF for buffer copies
nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 1)
intel8x0_measure_ac97_clock: measured 54792 usecs (2640 samples)
intel8x0: clocking to 48000
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
8139too 0000:02:05.0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
nouveau [ DRM] allocated 1920x1440 fb: 0x9000, bo f3392000
fbcon: nouveaufb (fb0) is primary device
2:3:1: cannot set freq 16000 to ep 0x86
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Console: switching to colour frame buffer device 240x90
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:01:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 0
2:3:2: cannot set freq 24000 to ep 0x86
2:3:3: cannot set freq 32000 to ep 0x86
2:3:4: cannot set freq 48000 to ep 0x86
usbcore: registered new interface driver snd-usb-audio
8139too 0000:02:05.0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
show_signal_msg: 33 callbacks suppressed
apport-checkrep[1603]: segfault at 0 ip 081f74dd sp bfb040a0 error 6 in python3.3[8048000+28d000]
NET: Registered protocol family 24
[UFW BLOCK] IN=ppp0 OUT= MAC= SRC=176.109.28.73 DST=178.204.34.112 LEN=48 TOS=0x00 PREC=0x00 TTL=115 ID=10813 DF PROTO=TCP SPT=52883 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0
[UFW BLOCK] IN=ppp0 OUT= MAC= SRC=141.105.53.143 DST=178.204.34.112 LEN=52 TOS=0x00 PREC=0x00 TTL=112 ID=31930 DF PROTO=TCP SPT=52430 DPT=6881 WINDOW=63443 RES=0x00 SYN URGP=0
[UFW BLOCK] IN=ppp0 OUT= MAC= SRC=87.249.197.151 DST=178.204.34.112 LEN=48 TOS=0x00 PREC=0x60 TTL=115 ID=29646 DF PROTO=TCP SPT=3266 DPT=46353 WINDOW=65535 RES=0x00 SYN URGP=0
[UFW BLOCK] IN=ppp0 OUT= MAC= SRC=141.105.53.143 DST=178.204.34.112 LEN=52 TOS=0x00 PREC=0x00 TTL=112 ID=31931 DF PROTO=TCP SPT=52430 DPT=6881 WINDOW=63443 RES=0x00 SYN URGP=0
[UFW BLOCK] IN=ppp0 OUT= MAC= SRC=176.109.28.73 DST=178.204.34.112 LEN=48 TOS=0x00 PREC=0x00 TTL=115 ID=11216 DF PROTO=TCP SPT=52883 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0
[UFW BLOCK] IN=ppp0 OUT= MAC= SRC=87.249.197.151 DST=178.204.34.112 LEN=48 TOS=0x00 PREC=0x60 TTL=115 ID=29760 DF PROTO=TCP SPT=3266 DPT=46353 WINDOW=65535 RES=0x00 SYN URGP=0
[UFW BLOCK] IN=ppp0 OUT= MAC= SRC=141.105.53.143 DST=178.204.34.112 LEN=52 TOS=0x00 PREC=0x00 TTL=112 ID=31932 DF PROTO=TCP SPT=52430 DPT=6881 WINDOW=63443 RES=0x00 SYN URGP=0
[UFW BLOCK] IN=ppp0 OUT= MAC= SRC=195.211.193.67 DST=178.204.34.112 LEN=52 TOS=0x00 PREC=0x00 TTL=117 ID=17017 DF PROTO=TCP SPT=8259 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0
[UFW BLOCK] IN=ppp0 OUT= MAC= SRC=195.211.193.67 DST=178.204.34.112 LEN=52 TOS=0x00 PREC=0x00 TTL=117 ID=17171 DF PROTO=TCP SPT=8259 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0
[UFW BLOCK] IN=ppp0 OUT= MAC= SRC=195.211.193.67 DST=178.204.34.112 LEN=48 TOS=0x00 PREC=0x00 TTL=117 ID=17546 DF PROTO=TCP SPT=8259 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0