dmesg - first
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfdeffff] usable
BIOS-e820: [mem 0x00000000cfdf0000-0x00000000cfdf2fff] ACPI NVS
BIOS-e820: [mem 0x00000000cfdf3000-0x00000000cfdfffff] ACPI data
BIOS-e820: [mem 0x00000000cfe00000-0x00000000cfefffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: Gigabyte Technology Co., Ltd. GA-78LMT-S2P/GA-78LMT-S2P, BIOS F2 03/20/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 base 0000CFE00000 mask FFFFFFE00000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000230000000 aka 8960M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3326MB, range: 2MB, type UC
total RAM covered: 3326M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 4M num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3326MB, range: 2MB, type UC
e820: update [mem 0xcfe00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcfdf0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f5d40-0x000f5d4f] mapped at [ffff8800000f5d40]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xcfdeffff]
[mem 0x00000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcfbfffff] page 2M
[mem 0xcfc00000-0xcfdeffff] page 4k
kernel direct mapping tables up to 0xcfdeffff @ [mem 0x1fffd000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x22fffffff]
[mem 0x100000000-0x1ffffffff] page 1G
[mem 0x200000000-0x22fffffff] page 2M
kernel direct mapping tables up to 0x22fffffff @ [mem 0xcfdee000-0xcfdeffff]
RAMDISK: [mem 0x362e4000-0x37169fff]
ACPI: RSDP 00000000000f7750 00014 (v00 GBT )
ACPI: RSDT 00000000cfdf3000 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000cfdf3080 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000cfdf3100 06398 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000cfdf0000 00040
ACPI: SSDT 00000000cfdf9580 0088C (v01 PTLTD POWERNOW 00000001 LTP 00000001)
ACPI: MSDM 00000000cfdf9e40 00055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: HPET 00000000cfdf9ec0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000cfdf9f00 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: TAMG 00000000cfdf9f40 000A2 (v01 GBT GBT B0 5455312E BG?? 45240101)
ACPI: APIC 00000000cfdf94c0 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022fffffff]
Initmem setup node 0 [mem 0x00000000-0x22fffffff]
NODE_DATA [mem 0x22fffc000-0x22fffffff]
[ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x22fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0xcfdeffff]
node 0: [mem 0x100000000-0x22fffffff]
On node 0 totalpages: 2096511
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3913 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 831024 pages, LIFO batch:31
Normal zone: 19456 pages used for memmap
Normal zone: 1225728 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfdf3000
PM: Registered nosave memory: 00000000cfdf3000 - 00000000cfe00000
PM: Registered nosave memory: 00000000cfe00000 - 00000000cff00000
PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s83584 r8192 d22912 u262144
pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2060665
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Node 0: aperture @ e3e2000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
Memory: 8091768k/9175040k available (6711k kernel code, 788996k absent, 294276k reserved, 6459k data, 928k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:744 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2109.495 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4218.99 BogoMIPS (lpj=8437980)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 00cff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
using AMD E400 aware idle routine
ACPI: Core revision 20120320
ftrace: allocating 25118 entries in 99 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X4 965 Processor stepping 03
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
System has AMD C1E enabled
Switch to broadcast mode on CPU1
Switch to broadcast mode on CPU2
Booting Node 0, Processors #1 #2 #3
Brought up 4 CPUs
Total of 4 processors activated (16875.96 BogoMIPS).
Switch to broadcast mode on CPU3
Switch to broadcast mode on CPU0
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcfdf0000-0xcfdf2fff] (12288 bytes)
dummy:
RTC time: 21:55:37, date: 03/11/13
NET: Registered protocol family 16
node 0 link 0: io port [c000, ffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [f0000000, fe02ffff]
node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
TOM2: 0000000230000000 aka 8960M
Trying to unpack rootfs image as initramfs...
bus: [00, 03] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xd0000000-0xdfffffff]
bus: 00 [mem 0xe0400000-0xffffffff]
bus: 00 [mem 0xe0100000-0xe03fffff]
bus: 00 [mem 0x230000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
Freeing initrd memory: 14872k freed
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: >host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: >host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: >host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: >host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: >host bridge window [mem 0xd0000000-0xfebfffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: >root bus resource [mem 0xd0000000-0xfebfffff]
pci 0000:00:00.0: >[1022:9600] type 00 class 0x060000
pci 0000:00:00.0: >reg 1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:02.0: >[1022:9603] type 01 class 0x060400
pci 0000:00:02.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: >[1022:9606] type 01 class 0x060400
pci 0000:00:06.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: >[1002:4390] type 00 class 0x01018f
pci 0000:00:11.0: >reg 10: [io 0xff00-0xff07]
pci 0000:00:11.0: >reg 14: [io 0xfe00-0xfe03]
pci 0000:00:11.0: >reg 18: [io 0xfd00-0xfd07]
pci 0000:00:11.0: >reg 1c: [io 0xfc00-0xfc03]
pci 0000:00:11.0: >reg 20: [io 0xfb00-0xfb0f]
pci 0000:00:11.0: >reg 24: [mem 0xfe02f000-0xfe02f3ff]
pci 0000:00:11.0: >set SATA to AHCI mode
pci 0000:00:12.0: >[1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: >reg 10: [mem 0xfe02e000-0xfe02efff]
pci 0000:00:12.1: >[1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: >reg 10: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:12.2: >[1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: >reg 10: [mem 0xfe02c000-0xfe02c0ff]
pci 0000:00:12.2: >supports D1 D2
pci 0000:00:12.2: >PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: >[1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: >reg 10: [mem 0xfe02b000-0xfe02bfff]
pci 0000:00:13.1: >[1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: >reg 10: [mem 0xfe02a000-0xfe02afff]
pci 0000:00:13.2: >[1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: >reg 10: [mem 0xfe029000-0xfe0290ff]
pci 0000:00:13.2: >supports D1 D2
pci 0000:00:13.2: >PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: >[1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: >[1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: >reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: >reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: >reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: >reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: >reg 20: [io 0xfa00-0xfa0f]
pci 0000:00:14.2: >[1002:4383] type 00 class 0x040300
pci 0000:00:14.2: >reg 10: [mem 0xfe024000-0xfe027fff 64bit]
pci 0000:00:14.2: >PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: >[1002:439d] type 00 class 0x060100
pci 0000:00:14.4: >[1002:4384] type 01 class 0x060401
pci 0000:00:14.5: >[1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: >reg 10: [mem 0xfe028000-0xfe028fff]
pci 0000:00:18.0: >[1022:1200] type 00 class 0x060000
pci 0000:00:18.1: >[1022:1201] type 00 class 0x060000
pci 0000:00:18.2: >[1022:1202] type 00 class 0x060000
pci 0000:00:18.3: >[1022:1203] type 00 class 0x060000
pci 0000:00:18.4: >[1022:1204] type 00 class 0x060000
pci 0000:01:00.0: >[10de:0de1] type 00 class 0x030000
pci 0000:01:00.0: >reg 10: [mem 0xfb000000-0xfbffffff]
pci 0000:01:00.0: >reg 14: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:01:00.0: >reg 1c: [mem 0xde000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: >reg 24: [io 0xef00-0xef7f]
pci 0000:01:00.0: >reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:01:00.1: >[10de:0bea] type 00 class 0x040300
pci 0000:01:00.1: >reg 10: [mem 0xfcffc000-0xfcffffff]
pci 0000:00:02.0: >PCI bridge to [bus 01-01]
pci 0000:00:02.0: > bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: > bridge window [mem 0xfb000000-0xfcffffff]
pci 0000:00:02.0: > bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: >[1969:1083] type 00 class 0x020000
pci 0000:02:00.0: >reg 10: [mem 0xfdcc0000-0xfdcfffff 64bit]
pci 0000:02:00.0: >reg 18: [io 0xdf00-0xdf7f]
pci 0000:02:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.0: >PCI bridge to [bus 02-02]
pci 0000:00:06.0: > bridge window [io 0xd000-0xdfff]
pci 0000:00:06.0: > bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:06.0: > bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:14.4: >PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:14.4: > bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: > bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:14.4: > bridge window [mem 0xfdd00000-0xfddfffff pref]
pci 0000:00:14.4: > bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: > bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
pci0000:00: >Requesting ACPI _OSC control (0x1d)
pci0000:00: >ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: >no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfdf0000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-ff]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0000-0x0cf7 window]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000c0000-0x000dffff window]
pnp 00:00: >[mem 0xd0000000-0xfebfffff window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: >[io 0x0010-0x001f]
pnp 00:01: >[io 0x0022-0x003f]
pnp 00:01: >[io 0x0044-0x005f]
pnp 00:01: >[io 0x0062-0x0063]
pnp 00:01: >[io 0x0065-0x006f]
pnp 00:01: >[io 0x0074-0x007f]
pnp 00:01: >[io 0x0091-0x0093]
pnp 00:01: >[io 0x00a2-0x00bf]
pnp 00:01: >[io 0x00e0-0x00ef]
pnp 00:01: >[io 0x04d0-0x04d1]
pnp 00:01: >[io 0x0220-0x0225]
pnp 00:01: >[io 0x0290-0x0294]
system 00:01: >[io 0x04d0-0x04d1] has been reserved
system 00:01: >[io 0x0220-0x0225] has been reserved
system 00:01: >[io 0x0290-0x0294] has been reserved
system 00:01: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: >[io 0x4100-0x411f]
pnp 00:02: >[io 0x0228-0x022f]
pnp 00:02: >[io 0x040b]
pnp 00:02: >[io 0x04d6]
pnp 00:02: >[io 0x0c00-0x0c01]
pnp 00:02: >[io 0x0c14]
pnp 00:02: >[io 0x0c50-0x0c52]
pnp 00:02: >[io 0x0c6c-0x0c6d]
pnp 00:02: >[io 0x0c6f]
pnp 00:02: >[io 0x0cd0-0x0cd1]
pnp 00:02: >[io 0x0cd2-0x0cd3]
pnp 00:02: >[io 0x0cd4-0x0cdf]
pnp 00:02: >[io 0x4000-0x40fe]
pnp 00:02: >[io 0x4210-0x4217]
pnp 00:02: >[io 0x0b00-0x0b0f]
pnp 00:02: >[io 0x0b10-0x0b1f]
pnp 00:02: >[io 0x0b20-0x0b3f]
pnp 00:02: >[mem 0x00000000-0x00000fff window]
pnp 00:02: >[mem 0xfee00400-0xfee00fff window]
pnp 00:02: >disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:02: >disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
system 00:02: >[io 0x4100-0x411f] has been reserved
system 00:02: >[io 0x0228-0x022f] has been reserved
system 00:02: >[io 0x040b] has been reserved
system 00:02: >[io 0x04d6] has been reserved
system 00:02: >[io 0x0c00-0x0c01] has been reserved
system 00:02: >[io 0x0c14] has been reserved
system 00:02: >[io 0x0c50-0x0c52] has been reserved
system 00:02: >[io 0x0c6c-0x0c6d] has been reserved
system 00:02: >[io 0x0c6f] has been reserved
system 00:02: >[io 0x0cd0-0x0cd1] has been reserved
system 00:02: >[io 0x0cd2-0x0cd3] has been reserved
system 00:02: >[io 0x0cd4-0x0cdf] has been reserved
system 00:02: >[io 0x4000-0x40fe] has been reserved
system 00:02: >[io 0x4210-0x4217] has been reserved
system 00:02: >[io 0x0b00-0x0b0f] has been reserved
system 00:02: >[io 0x0b10-0x0b1f] has been reserved
system 00:02: >[io 0x0b20-0x0b3f] has been reserved
system 00:02: >[mem 0xfee00400-0xfee00fff window] has been reserved
system 00:02: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: >[dma 4]
pnp 00:03: >[io 0x0000-0x000f]
pnp 00:03: >[io 0x0080-0x0090]
pnp 00:03: >[io 0x0094-0x009f]
pnp 00:03: >[io 0x00c0-0x00df]
pnp 00:03: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: >[irq 0 disabled]
pnp 00:04: >[irq 8]
pnp 00:04: >[mem 0xfed00000-0xfed003ff]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: >[io 0x0070-0x0073]
pnp 00:05: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: >[io 0x0061]
pnp 00:06: >Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: >[io 0x00f0-0x00ff]
pnp 00:07: >[irq 13]
pnp 00:07: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: >[io 0x03f8-0x03ff]
pnp 00:08: >[irq 4]
pnp 00:08: >Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: >[mem 0xe0000000-0xefffffff]
system 00:09: >[mem 0xe0000000-0xefffffff] has been reserved
system 00:09: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: >[mem 0x000cda00-0x000cffff]
pnp 00:0a: >[mem 0x000f0000-0x000f7fff]
pnp 00:0a: >[mem 0x000f8000-0x000fbfff]
pnp 00:0a: >[mem 0x000fc000-0x000fffff]
pnp 00:0a: >[mem 0xcfdf0000-0xcfdfffff]
pnp 00:0a: >[mem 0xffff0000-0xffffffff]
pnp 00:0a: >[mem 0x00000000-0x0009ffff]
pnp 00:0a: >[mem 0x00100000-0xcfdeffff]
pnp 00:0a: >[mem 0xcfe00000-0xcfefffff]
pnp 00:0a: >[mem 0xcff00000-0xcfffffff]
pnp 00:0a: >[mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:0a: >[mem 0xfec00000-0xfec00fff]
pnp 00:0a: >[mem 0xfee00000-0xfee00fff]
pnp 00:0a: >[mem 0xfff80000-0xfffeffff]
pnp 00:0a: >disabling [mem 0x000cda00-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: >disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: >disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: >disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: >disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: >disabling [mem 0x00100000-0xcfdeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: >[Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xe0000000-0xe00fffff]; adding more reservations
system 00:0a: >[mem 0xcfdf0000-0xcfdfffff] could not be reserved
system 00:0a: >[mem 0xffff0000-0xffffffff] has been reserved
system 00:0a: >[mem 0xcfe00000-0xcfefffff] has been reserved
system 00:0a: >[mem 0xcff00000-0xcfffffff] could not be reserved
system 00:0a: >[mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: >[mem 0xfee00000-0xfee00fff] could not be reserved
system 00:0a: >[mem 0xfff80000-0xfffeffff] has been reserved
system 00:0a: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:01:00.0: >BAR 6: assigned [mem 0xd8000000-0xd807ffff pref]
pci 0000:00:02.0: >PCI bridge to [bus 01-01]
pci 0000:00:02.0: > bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: > bridge window [mem 0xfb000000-0xfcffffff]
pci 0000:00:02.0: > bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:06.0: >PCI bridge to [bus 02-02]
pci 0000:00:06.0: > bridge window [io 0xd000-0xdfff]
pci 0000:00:06.0: > bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:06.0: > bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:14.4: >PCI bridge to [bus 03-03]
pci 0000:00:14.4: > bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: > bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:14.4: > bridge window [mem 0xfdd00000-0xfddfffff pref]
pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: >resource 8 [mem 0xd0000000-0xfebfffff]
pci_bus 0000:01: >resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: >resource 1 [mem 0xfb000000-0xfcffffff]
pci_bus 0000:01: >resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: >resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: >resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:02: >resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:03: >resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: >resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:03: >resource 2 [mem 0xfdd00000-0xfddfffff pref]
pci_bus 0000:03: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: >resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:03: >resource 8 [mem 0xd0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: >Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
audit: initializing netlink socket (disabled)
type=2000 audit(1363038937.844:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 15962
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: >irq 40 for MSI/MSI-X
pcieport 0000:00:06.0: >irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: processor limited to max C-state 1
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: >version 3.0
ahci 0000:00:11.0: >AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: >flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: >EHCI Host Controller
ehci_hcd 0000:00:12.2: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: >debug port 1
ehci_hcd 0000:00:12.2: >irq 17, io mem 0xfe02c000
ehci_hcd 0000:00:12.2: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb1: >SerialNumber: 0000:00:12.2
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >6 ports detected
ehci_hcd 0000:00:13.2: >EHCI Host Controller
ehci_hcd 0000:00:13.2: >new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: >debug port 1
ehci_hcd 0000:00:13.2: >irq 19, io mem 0xfe029000
ehci_hcd 0000:00:13.2: >USB 2.0 started, EHCI 1.00
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: EHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb2: >SerialNumber: 0000:00:13.2
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: >OHCI Host Controller
ohci_hcd 0000:00:12.0: >new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: >irq 16, io mem 0xfe02e000
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: OHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb3: >SerialNumber: 0000:00:12.0
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >3 ports detected
ohci_hcd 0000:00:12.1: >OHCI Host Controller
ohci_hcd 0000:00:12.1: >new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: >irq 16, io mem 0xfe02d000
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: OHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb4: >SerialNumber: 0000:00:12.1
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >3 ports detected
ohci_hcd 0000:00:13.0: >OHCI Host Controller
ohci_hcd 0000:00:13.0: >new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: >irq 18, io mem 0xfe02b000
usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: >Product: OHCI Host Controller
usb usb5: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb5: >SerialNumber: 0000:00:13.0
hub 5-0:1.0: >USB hub found
hub 5-0:1.0: >3 ports detected
ohci_hcd 0000:00:13.1: >OHCI Host Controller
ohci_hcd 0000:00:13.1: >new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: >irq 18, io mem 0xfe02a000
usb usb6: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: >Product: OHCI Host Controller
usb usb6: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb6: >SerialNumber: 0000:00:13.1
hub 6-0:1.0: >USB hub found
hub 6-0:1.0: >3 ports detected
ohci_hcd 0000:00:14.5: >OHCI Host Controller
ohci_hcd 0000:00:14.5: >new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: >irq 18, io mem 0xfe028000
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usb usb7: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: >Product: OHCI Host Controller
usb usb7: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb7: >SerialNumber: 0000:00:14.5
hub 7-0:1.0: >USB hub found
hub 7-0:1.0: >2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
usb 2-3: >new high-speed USB device number 2 using ehci_hcd
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
usb 2-3: >New USB device found, idVendor=0781, idProduct=5202
usb 2-3: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3: >Product: Relay UFD
usb 2-3: >Manufacturer: Staples
usb 2-3: >SerialNumber: 20044318330540836EE8
Initializing USB Mass Storage driver...
scsi4 : usb-storage 2-3:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: ST31000520AS, CC32, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: >Direct-Access ATA ST31000520AS CC32 PQ: 0 ANSI: 5
sd 0:0:0:0: >Attached scsi generic sg0 type 0
sd 0:0:0:0: >[sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: >[sda] Write Protect is off
sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: ATAPI: HL-DT-ST DVDRAM GH24LS70, GL00, max UDMA/100
ata2.00: configured for UDMA/100
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: >[sda] Attached SCSI disk
scsi 1:0:0:0: >CD-ROM HL-DT-ST DVDRAM GH24LS70 GL00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: >Attached scsi CD-ROM sr0
sr 1:0:0:0: >Attached scsi generic sg1 type 5
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: >RTC can wake from S4
rtc_cmos 00:05: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 5:925:954
memory memory7: >hash matches
rtc_cmos 00:05: >setting system clock to 2013-03-11 21:55:39 UTC (1363038939)
powernow-k8: Found 1 AMD Phenom(tm) II X4 965 Processor (4 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (2100 MHz)
powernow-k8: 1 : pstate 1 (2100 MHz)
powernow-k8: 2 : pstate 2 (2100 MHz)
powernow-k8: 3 : pstate 3 (800 MHz)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 928k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1472k freed
Freeing unused kernel memory: 1124k freed
udevd[112]: starting version 175
scsi5 : pata_atiixp
scsi6 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
atl1c 0000:02:00.0: >version 1.0.1.0-NAPI
usb 6-2: >new low-speed USB device number 2 using ohci_hcd
Refined TSC clocksource calibration: 2109.330 MHz.
Switching to clocksource tsc
usb 6-2: >New USB device found, idVendor=046d, idProduct=c517
usb 6-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: >Product: USB Receiver
usb 6-2: >Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/input/input2
logitech 0003:046D:C517.0001: >input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:13.1-2/input0
logitech 0003:046D:C517.0002: >fixing up Logitech keyboard report descriptor
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/input/input3
logitech 0003:046D:C517.0002: >input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-2/input1
usb 6-3: >new full-speed USB device number 3 using ohci_hcd
scsi 4:0:0:0: >Direct-Access Staples Relay UFD 1.20 PQ: 0 ANSI: 5
sd 4:0:0:0: >Attached scsi generic sg2 type 0
sd 4:0:0:0: >[sdb] 7821312 512-byte logical blocks: (4.00 GB/3.72 GiB)
sd 4:0:0:0: >[sdb] Write Protect is off
sd 4:0:0:0: >[sdb] Mode Sense: 43 00 00 00
sd 4:0:0:0: >[sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 4:0:0:0: >[sdb] Attached SCSI removable disk
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
usb 6-3: >New USB device found, idVendor=045e, idProduct=00f5
usb 6-3: >New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 6-3: >Product: USB camera
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 8384508k swap on /dev/sda5. Priority:-1 extents:1 across:8384508k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[368]: starting version 175
lp: driver loaded but no devices found
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
sp5100_tco: mmio address 0xfec000f0 already in use
wmi: Mapper loaded
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 2.1.0
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.51 Tue Sep 18 17:16:56 PDT 2012
microcode: CPU0: patch_level=0x010000c8
Linux video capture interface: v2.00
gspca_main: v2.14.0 registered
gspca_main: sonixj-2.14.0 probing 045e:00f5
input: sonixj as /devices/pci0000:00/0000:00:13.1/usb6/6-3/input/input4
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
usbcore: registered new interface driver sonixj
usbcore: registered new interface driver snd-usb-audio
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
hda_intel: Disabling MSI
hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
microcode: failed to load file amd-ucode/microcode_amd.bin
microcode: CPU1: patch_level=0x010000c8
microcode: failed to load file amd-ucode/microcode_amd.bin
microcode: CPU2: patch_level=0x010000c8
microcode: failed to load file amd-ucode/microcode_amd.bin
microcode: CPU3: patch_level=0x010000c8
microcode: failed to load file amd-ucode/microcode_amd.bin
microcode: Microcode Update Driver: v2.00 , Peter Oruba
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
init: failsafe main process (837) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ppdev: user-space parallel port driver
atl1c 0000:02:00.0: >irq 42 for MSI/MSI-X
atl1c 0000:02:00.0: >atl1c: eth0 NIC Link is Up
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input10
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input11
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input12
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input13
init: udev-fallback-graphics main process (1032) terminated with status 1
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x2bc offMax=0x2ffe
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.1.18_Ubuntu (interface 0x00190000).
vboxpci: IOMMU not found (not registered)
init: plymouth-stop pre-start process (2000) terminated with status 1
NVRM: GPU at 0000:01:00: GPU-5792a7dd-2a1c-5aaa-9e1b-b5c0e6b058ac
usb 2-3: >USB disconnect, device number 2
usb 2-3: >new high-speed USB device number 5 using ehci_hcd
usb 2-3: >New USB device found, idVendor=0781, idProduct=5202
usb 2-3: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3: >Product: Relay UFD
usb 2-3: >Manufacturer: Staples
usb 2-3: >SerialNumber: 20044318330540836EE8
scsi7 : usb-storage 2-3:1.0
scsi 7:0:0:0: >Direct-Access Staples Relay UFD 1.20 PQ: 0 ANSI: 5
sd 7:0:0:0: >Attached scsi generic sg2 type 0
sd 7:0:0:0: >[sdb] 7821312 512-byte logical blocks: (4.00 GB/3.72 GiB)
sd 7:0:0:0: >[sdb] Write Protect is off
sd 7:0:0:0: >[sdb] Mode Sense: 43 00 00 00
sd 7:0:0:0: >[sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 7:0:0:0: >[sdb] Attached SCSI removable disk
usb 2-3: >USB disconnect, device number 5
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
NTFS driver 2.1.30 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
Btrfs loaded
CE: hpet increased min_delta_ns to 20113 nsec
usb 2-3: >new high-speed USB device number 6 using ehci_hcd
usb 2-3: >New USB device found, idVendor=0781, idProduct=5202
usb 2-3: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3: >Product: Relay UFD
usb 2-3: >Manufacturer: Staples
usb 2-3: >SerialNumber: 20044318330540836EE8
scsi8 : usb-storage 2-3:1.0
scsi 8:0:0:0: >Direct-Access Staples Relay UFD 1.20 PQ: 0 ANSI: 5
sd 8:0:0:0: >Attached scsi generic sg2 type 0
sd 8:0:0:0: >[sdb] 7821312 512-byte logical blocks: (4.00 GB/3.72 GiB)
sd 8:0:0:0: >[sdb] Write Protect is off
sd 8:0:0:0: >[sdb] Mode Sense: 43 00 00 00
sd 8:0:0:0: >[sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 8:0:0:0: >[sdb] Attached SCSI removable disk
usb 2-3: >USB disconnect, device number 6
usb 2-3: >new high-speed USB device number 7 using ehci_hcd
usb 2-3: >New USB device found, idVendor=0781, idProduct=5202
usb 2-3: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3: >Product: Relay UFD
usb 2-3: >Manufacturer: Staples
usb 2-3: >SerialNumber: 20044318330540836EE8
scsi9 : usb-storage 2-3:1.0
scsi 9:0:0:0: >Direct-Access Staples Relay UFD 1.20 PQ: 0 ANSI: 5
sd 9:0:0:0: >Attached scsi generic sg2 type 0
sd 9:0:0:0: >[sdb] 7821312 512-byte logical blocks: (4.00 GB/3.72 GiB)
sd 9:0:0:0: >[sdb] Write Protect is off
sd 9:0:0:0: >[sdb] Mode Sense: 43 00 00 00
sd 9:0:0:0: >[sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 9:0:0:0: >[sdb] Attached SCSI removable disk
usb 2-3: >USB disconnect, device number 7
usb 1-2: >new high-speed USB device number 2 using ehci_hcd
usb 1-2: >New USB device found, idVendor=0bb4, idProduct=0df5
usb 1-2: >New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-2: >Product: Android Phone
usb 1-2: >Manufacturer: HTC
usb 1-2: >SerialNumber: HT26KS402889
scsi10 : usb-storage 1-2:1.2
usb 1-2: >USB disconnect, device number 2
usb 1-2: >new high-speed USB device number 3 using ehci_hcd
usb 1-2: >New USB device found, idVendor=0bb4, idProduct=0df5
usb 1-2: >New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 1-2: >Product: Android Phone
usb 1-2: >Manufacturer: HTC
usb 1-2: >SerialNumber: HT26KS402889
usb 1-2: >USB disconnect, device number 3