dmesg - 2013-03-12
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-5-amd64 (Debian 2.6.32-48squeeze1) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Feb 25 00:26:11 UTC 2013
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bfe90000 (usable)
BIOS-e820: 00000000bfe90000 - 00000000bfee3000 (ACPI NVS)
BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000238000000 (usable)
DMI 2.5 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x238000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CCFFF write-protect
CD000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 100000000 mask F00000000 write-back
1 base 200000000 mask FE0000000 write-back
2 base 220000000 mask FF0000000 write-back
3 base 230000000 mask FF8000000 write-back
4 base 000000000 mask F00000000 write-back
5 base 0C0000000 mask FC0000000 uncachable
6 base 0BFF00000 mask FFFF00000 uncachable
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbfe90 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bfe90000
0000000000 - 00bfe00000 page 2M
00bfe00000 - 00bfe90000 page 4k
kernel direct mapping tables up to bfe90000 @ 10000-15000
init_memory_mapping: 0000000100000000-0000000238000000
0100000000 - 0238000000 page 2M
kernel direct mapping tables up to 238000000 @ 13000-1d000
RAMDISK: 3770b000 - 37fefbd5
ACPI: RSDP 00000000000f89a0 00014 (v00 OEM DC)
ACPI: RSDT 00000000bfee3000 0003C (v01 OEM DC ClientDC 42302E31 AWRD 00000000)
ACPI: FACP 00000000bfee3080 00084 (v02 OEM DC ClientDC 42302E31 AWRD 00000000)
ACPI: DSDT 00000000bfee3140 05642 (v01 OEM DC AWRDACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000bfe90000 00040
ACPI: ASF! 00000000bfee8940 0008A (v16 OEM DC ClientDC 42302E31 AWRD 00000000)
ACPI: HPET 00000000bfee88c0 00038 (v01 OEM DC ClientDC 42302E31 AWRD 00000098)
ACPI: MCFG 00000000bfee8900 0003C (v01 OEM DC ClientDC 42302E31 AWRD 00000000)
ACPI: APIC 00000000bfee87c0 00084 (v01 OEM DC ClientDC 42302E31 AWRD 00000000)
ACPI: SSDT 00000000bfee94a0 00ADF (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000238000000
Bootmem setup node 0 0000000000000000-0000000238000000
NODE_DATA [0000000000018000 - 000000000001ffff]
bootmap [0000000000020000 - 0000000000066fff] pages 47
(8 early reservations) ==> bootmem [0000000000 - 0238000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 00016db584] TEXT DATA BSS ==> [0001000000 - 00016db584]
#3 [003770b000 - 0037fefbd5] RAMDISK ==> [003770b000 - 0037fefbd5]
#4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000]
#5 [00016dc000 - 00016dc0be] BRK ==> [00016dc000 - 00016dc0be]
#6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
#7 [0000013000 - 0000018000] PGTABLE ==> [0000013000 - 0000018000]
found SMP MP-table at [ffff8800000f4100] f4100
[ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880001800000-ffff8800087fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00238000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x000bfe90
0: 0x00100000 -> 0x00238000
On node 0 totalpages: 2063902
DMA zone: 56 pages used for memmap
DMA zone: 109 pages reserved
DMA zone: 3817 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 767688 pages, LIFO batch:31
Normal zone: 17472 pages used for memmap
Normal zone: 1260480 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000bfe90000 - 00000000bfee3000
PM: Registered nosave memory: 00000000bfee3000 - 00000000bfef0000
PM: Registered nosave memory: 00000000bfef0000 - 00000000bff00000
PM: Registered nosave memory: 00000000bff00000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at bff00000 (gap: bff00000:20100000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880008a00000 s90392 r8192 d24296 u524288
pcpu-alloc: s90392 r8192 d24296 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2031985
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880008b9e000 - ffff88000cb9e000
software IO TLB at phys 0x8b9e000 - 0xcb9e000
Memory: 8057912k/9306112k available (3087k kernel code, 1050504k absent, 197696k reserved, 2053k data, 592k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:440
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2992.642 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.28 BogoMIPS (lpj=11970568)
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 0/0x0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20090903
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz stepping 0a
Booting processor 1 APIC 0x3 ip 0x6000
Initializing CPU#1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 1/0x3 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 2/0x2 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU2: Thermal monitoring enabled (TM2)
CPU2: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x1 ip 0x6000
Initializing CPU#3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 3/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU3: Thermal monitoring enabled (TM2)
CPU3: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (23940.12 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0,3 level MC
groups: group ffff880008a0fbf0 cpus 0 group ffff880008b8fbf0 cpus 3
domain 1: span 0-3 level CPU
groups: group ffff880008a0fd00 cpus 0,3 (cpu_power = 2048) group ffff880008a8fd00 cpus 1-2 (cpu_power = 2048)
CPU1 attaching sched-domain:
domain 0: span 1-2 level MC
groups: group ffff880008a8fbf0 cpus 1 group ffff880008b0fbf0 cpus 2
domain 1: span 0-3 level CPU
groups: group ffff880008a8fd00 cpus 1-2 (cpu_power = 2048) group ffff880008a0fd00 cpus 0,3 (cpu_power = 2048)
CPU2 attaching sched-domain:
domain 0: span 1-2 level MC
groups: group ffff880008b0fbf0 cpus 2 group ffff880008a8fbf0 cpus 1
domain 1: span 0-3 level CPU
groups: group ffff880008a8fd00 cpus 1-2 (cpu_power = 2048) group ffff880008a0fd00 cpus 0,3 (cpu_power = 2048)
CPU3 attaching sched-domain:
domain 0: span 0,3 level MC
groups: group ffff880008b8fbf0 cpus 3 group ffff880008a0fbf0 cpus 0
domain 1: span 0-3 level CPU
groups: group ffff880008a0fd00 cpus 0,3 (cpu_power = 2048) group ffff880008a8fd00 cpus 1-2 (cpu_power = 2048)
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI Warning: Incorrect checksum in table [ASF!] - 77, should be 6B (20090903/tbutils-314)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:19.0: reg 10 32bit mmio: [0xfdfc0000-0xfdfdffff]
pci 0000:00:19.0: reg 14 32bit mmio: [0xfdfff000-0xfdffffff]
pci 0000:00:19.0: reg 18 io port: [0xff00-0xff1f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0xfe00-0xfe1f]
pci 0000:00:1a.1: reg 20 io port: [0xfd00-0xfd1f]
pci 0000:00:1a.2: reg 20 io port: [0xfc00-0xfc1f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfdffe000-0xfdffe3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff4000-0xfdff7fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xfb00-0xfb1f]
pci 0000:00:1d.1: reg 20 io port: [0xfa00-0xfa1f]
pci 0000:00:1d.2: reg 20 io port: [0xf900-0xf91f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdffd000-0xfdffd3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0xf800-0xf807]
pci 0000:00:1f.2: reg 14 io port: [0xf700-0xf703]
pci 0000:00:1f.2: reg 18 io port: [0xf600-0xf607]
pci 0000:00:1f.2: reg 1c io port: [0xf500-0xf503]
pci 0000:00:1f.2: reg 20 io port: [0xf400-0xf41f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0x00f000-0x00f7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xfdffc000-0xfdffc0ff]
pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:01:00.0: reg 24 io port: [0xcf00-0xcf7f]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfbfe0000-0xfbffffff]
pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:02:00.0: reg 10 io port: [0xdf00-0xdf07]
pci 0000:02:00.0: supports D2
pci 0000:02:00.0: PME# supported from D0 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:03.0: reg 10 32bit mmio: [0xfdee0000-0xfdefffff]
pci 0000:02:03.0: reg 18 io port: [0xde00-0xde3f]
pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
pci 0000:02:03.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
pci 0000:00:1f.2: BAR 5: address space collision on of device [0x00f000-0x00f7ff]
pci 0000:00:1f.2: BAR 5: can't allocate resource
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
HPET: 8 timers in total, 4 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 24 for MSI
hpet: hpet3 irq 25 for MSI
hpet: hpet4 irq 26 for MSI
hpet: hpet5 irq 27 for MSI
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x880-0x88f has been reserved
system 00:0b: ioport range 0x400-0x4bf has been reserved
system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0e: iomem range 0xf0000-0xfffff could not be reserved
system 00:0e: iomem range 0xbff00000-0xbfffffff could not be reserved
system 00:0e: iomem range 0xfed00000-0xfed000ff has been reserved
system 00:0e: iomem range 0xbfe90000-0xbfefffff could not be reserved
system 00:0e: iomem range 0x0-0x9ffff could not be reserved
system 00:0e: iomem range 0x100000-0xbfe8ffff could not be reserved
system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0e: iomem range 0xfed13000-0xfed1ffff has been reserved
system 00:0e: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:0e: iomem range 0xfed45000-0xfed9ffff has been reserved
system 00:0e: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0e: iomem range 0xffb00000-0xffb7ffff has been reserved
system 00:0e: iomem range 0xfff00000-0xffffffff has been reserved
system 00:0e: iomem range 0xe0000-0xeffff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0xc000-0xcfff
pci 0000:00:01.0: MEM window: 0xf8000000-0xfbffffff
pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0: IO window: 0xd000-0xdfff
pci 0000:00:1e.0: MEM window: 0xfde00000-0xfdefffff
pci 0000:00:1e.0: PREFETCH window: disabled
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbffffff]
pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:02: resource 1 mem: [0xfde00000-0xfdefffff]
pci_bus 0000:02: resource 3 io: [0x00-0xffff]
pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1a.1: PCI INT B disabled
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1a.2: PCI INT D disabled
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1a.7: PCI INT C disabled
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1d.1: PCI INT B disabled
pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.7: PCI INT A disabled
pci 0000:01:00.0: Boot video device
Unpacking initramfs...
Freeing initrd memory: 9106k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1363013680.552:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15755
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 28 for MSI/MSI-X
pcieport 0000:00:01.0: setting latency timer to 64
Linux agpgart interface v0.103
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
serial 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
0000:02:00.0: ttyS2 at I/O 0xdf00 (irq = 16) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
No iBFT detected.
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2013-03-11 14:54:41 UTC (1363013681)
Initalizing network drop monitor service
Freeing unused kernel memory: 592k freed
Write protecting the kernel read-only data: 4252k
udev[76]: starting version 164
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (22 C)
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000 0000:02:03.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN] (on)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
libata version 3.00 loaded.
FDC 0 is a post-1991 82077
e1000: 0000:02:03.0: e1000_probe: (PCI:33MHz:32-bit) 00:19:0f:0f:3f:23
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:19:0f:0f:40:4f
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: FFFFFF-0FF
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdffe000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: enabling device (0005 -> 0007)
ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xc0000000 port 0xc0000100 irq 30
ata2: SATA max UDMA/133 abar m2048@0xc0000000 port 0xc0000180 irq 30
ata3: SATA max UDMA/133 abar m2048@0xc0000000 port 0xc0000200 irq 30
ata4: SATA max UDMA/133 abar m2048@0xc0000000 port 0xc0000280 irq 30
ata5: SATA max UDMA/133 abar m2048@0xc0000000 port 0xc0000300 irq 30
ata6: SATA max UDMA/133 abar m2048@0xc0000000 port 0xc0000380 irq 30
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffd000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fd00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fc00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
ata1: SATA link down (SStatus 0 SControl 300)
usb 6-2: new low speed USB device using uhci_hcd and address 2
CE: hpet2 increasing min_delta_ns to 15000 nsec
CE: hpet2 increasing min_delta_ns to 22500 nsec
hrtimer: interrupt took 5001 ns
CE: hpet4 increasing min_delta_ns to 15000 nsec
CE: hpet4 increasing min_delta_ns to 22500 nsec
ata2: SATA link down (SStatus 0 SControl 300)
usb 6-2: New USB device found, idVendor=046d, idProduct=c05a
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: USB Optical Mouse
usb 6-2: Manufacturer: Logitech
usb 6-2: configuration #1 chosen from 1 choice
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: Optiarc DVD RW AD-7280S, 1.01, max UDMA/100
ata4.00: configured for UDMA/100
scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7280S 1.01 PQ: 0 ANSI: 5
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: ST1000NM0011, SN03, max UDMA/133
ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA ST1000NM0011 SN03 PQ: 0 ANSI: 5
ata6: SATA link down (SStatus 0 SControl 300)
sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sda1 sda2 <
sr 3:0:0:0: Attached scsi CD-ROM sr0
sda5 >
sd 4:0:0:0: [sda] Attached SCSI disk
usbcore: registered new interface driver hiddev
sr 3:0:0:0: Attached scsi generic sg0 type 5
sd 4:0:0:0: Attached scsi generic sg1 type 0
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input2
generic-usb 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-2/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
PM: Starting manual resume from disk
PM: Resume from partition 8:5
PM: Checking hibernation image.
PM: Error -22 checking image file
PM: Resume from disk failed.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
udev[469]: starting version 164
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
ACPI: SSDT 00000000bfee8a40 0028B (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
processor LNXCPU:00: registered as cooling_device1
ACPI: SSDT 00000000bfee8f60 001B3 (v01 PmRef Cpu1Ist 00003000 INTL 20061109)
processor LNXCPU:01: registered as cooling_device2
ACPI: SSDT 00000000bfee9120 001B3 (v01 PmRef Cpu2Ist 00003000 INTL 20061109)
processor LNXCPU:02: registered as cooling_device3
ACPI: SSDT 00000000bfee92e0 001B3 (v01 PmRef Cpu3Ist 00003000 INTL 20061109)
processor LNXCPU:03: registered as cooling_device4
input: PC Speaker as /devices/platform/pcspkr/input/input5
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 310.19 Thu Nov 8 00:52:03 PST 2012
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC888: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
Adding 15755256k swap on /dev/sda5. Priority:-1 extents:1 across:15755256k
EXT3 FS on sda1, internal journal
loop: module loaded
fuse init (API version 7.13)
e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
NVRM: GPU at 0000:01:00: GPU-5d61bda8-5e82-50b6-2879-2a668fa8eb0d
/dev/vmmon[1760]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[1760]: Module vmmon: initialized
[1767]: VMCI: shared components initialized.
[1767]: VMCI: host components initialized.
[1767]: VMCI: Module registered (name=vmci,major=10,minor=58).
[1767]: VMCI: Using host personality
[1767]: VMCI: Module (name=vmci) is initialized
/dev/vmnet: open called by PID 1858 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
bridge-eth0: disabling the bridge
bridge-eth0: down
bridge-eth0: detached
/dev/vmnet: open called by PID 1858 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth1: up
bridge-eth1: attached
/dev/vmnet: open called by PID 1955 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 1968 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
CE: hpet3 increasing min_delta_ns to 15000 nsec
CE: hpet3 increasing min_delta_ns to 22500 nsec
/dev/vmnet: open called by PID 1975 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
userif-4: sent link down event.
userif-4: sent link up event.
/dev/vmnet: open called by PID 1978 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 1985 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
eth1: no IPv6 routers present
eth0: no IPv6 routers present
CE: hpet5 increasing min_delta_ns to 15000 nsec
CE: hpet5 increasing min_delta_ns to 22500 nsec
userif-4: sent link down event.
userif-4: sent link up event.
bridge-eth1: disabling the bridge
bridge-eth1: down
bridge-eth1: detached
/dev/vmnet: open called by PID 1858 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
userif-4: sent link down event.
userif-4: sent link up event.
vmnet1: no IPv6 routers present
vmnet8: no IPv6 routers present
bridge-eth0: disabling the bridge
bridge-eth0: down
bridge-eth0: detached
[5265]: VMCI: Module vmci: unloaded
/dev/vmmon[5290]: Module vmmon: unloaded
/dev/vmmon[5382]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[5382]: Module vmmon: initialized
[5389]: VMCI: shared components initialized.
[5389]: VMCI: host components initialized.
[5389]: VMCI: Module registered (name=vmci,major=10,minor=58).
[5389]: VMCI: Using host personality
[5389]: VMCI: Module (name=vmci) is initialized
/dev/vmnet: open called by PID 5459 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
/dev/vmnet: open called by PID 5466 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 5473 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 5477 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
userif-3: sent link down event.
userif-3: sent link up event.
/dev/vmnet: open called by PID 5480 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 5487 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
bridge-eth0: disabling the bridge
bridge-eth0: down
bridge-eth0: detached
[5920]: VMCI: Module vmci: unloaded
/dev/vmmon[5945]: Module vmmon: unloaded
/dev/vmmon[7972]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[7972]: Module vmmon: initialized
[7979]: VMCI: shared components initialized.
[7979]: VMCI: host components initialized.
[7979]: VMCI: Module registered (name=vmci,major=10,minor=58).
[7979]: VMCI: Using host personality
[7979]: VMCI: Module (name=vmci) is initialized
/dev/vmnet: open called by PID 8050 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
/dev/vmnet: open called by PID 8057 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 8064 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 8070 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
userif-3: sent link down event.
userif-3: sent link up event.
/dev/vmnet: open called by PID 8071 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 8078 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
bridge-eth0: disabling the bridge
bridge-eth0: down
bridge-eth0: detached
[8184]: VMCI: Module vmci: unloaded
/dev/vmmon[8209]: Module vmmon: unloaded
/dev/vmmon[8251]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[8251]: Module vmmon: initialized
[8258]: VMCI: shared components initialized.
[8258]: VMCI: host components initialized.
[8258]: VMCI: Module registered (name=vmci,major=10,minor=58).
[8258]: VMCI: Using host personality
[8258]: VMCI: Module (name=vmci) is initialized
/dev/vmnet: open called by PID 8329 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
/dev/vmnet: open called by PID 8336 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 8343 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 8347 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
userif-3: sent link down event.
userif-3: sent link up event.
/dev/vmnet: open called by PID 8350 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 8357 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
[8695]: VMCI: Module vmci: unloaded
/dev/vmmon[8720]: Module vmmon: unloaded
bridge-eth0: disabling the bridge
bridge-eth0: down
bridge-eth0: detached
/dev/vmmon[8772]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[8772]: Module vmmon: initialized
[8779]: VMCI: shared components initialized.
[8779]: VMCI: host components initialized.
[8779]: VMCI: Module registered (name=vmci,major=10,minor=58).
[8779]: VMCI: Using host personality
[8779]: VMCI: Module (name=vmci) is initialized
/dev/vmnet: open called by PID 8850 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
/dev/vmnet: open called by PID 8857 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 8864 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 8868 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
userif-3: sent link down event.
userif-3: sent link up event.
/dev/vmnet: open called by PID 8871 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 8878 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
vmnet8: no IPv6 routers present
vmnet1: no IPv6 routers present
/dev/vmmon[9986]: PTSC: initialized at 2992641000 Hz using TSC, TSCs are synchronized.
/dev/vmmon[9986]: Monitor IPI vector: fd
/dev/vmnet: open called by PID 9997 (vmx-vcpu-0)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 9997 (vmx-vcpu-0)
/dev/vmnet: port on hub 8 successfully opened
usb 2-5: new high speed USB device using ehci_hcd and address 3
usb 2-5: New USB device found, idVendor=058f, idProduct=6387
usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-5: Product: Mass Storage
usb 2-5: Manufacturer: Generic
usb 2-5: SerialNumber: 410E2EDC
usb 2-5: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device scan complete
scsi 6:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] 8065024 512-byte logical blocks: (4.12 GB/3.84 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Attached SCSI removable disk
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
nautilus: sending ioctl 2285 to a partition!
usb 2-5: USB disconnect, address 3