dmesg - ramspeed
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-generic (buildd@roseapple) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:32:08 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007ffcffff] usable
BIOS-e820: [mem 0x000000007ffd0000-0x000000007ffddfff] ACPI data
BIOS-e820: [mem 0x000000007ffde000-0x000000007fffffff] ACPI NVS
BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
DMI present.
DMI: MICRO-STAR INTERANTIONAL CO.,LTD MS-7327/MS-7327, BIOS V1.4 05/28/2007
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7ffd0 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[mem 0x00000000-0x001fffff] page 4k
[mem 0x00200000-0x379fffff] page 2M
[mem 0x37a00000-0x37bfdfff] page 4k
kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
RAMDISK: [mem 0x36334000-0x37191fff]
ACPI: RSDP 000f9960 00014 (v00 ACPIAM)
ACPI: RSDT 7ffd0000 00038 (v01 052807 RSDT1129 20070528 MSFT 00000097)
ACPI: FACP 7ffd0200 00084 (v02 052807 FACP1129 20070528 MSFT 00000097)
ACPI: DSDT 7ffd0430 045D7 (v01 1ADNC 1ADNCB36 00000B36 INTL 20051117)
ACPI: FACS 7ffde000 00040
ACPI: APIC 7ffd0390 0005C (v01 052807 APIC1129 20070528 MSFT 00000097)
ACPI: MCFG 7ffd03f0 0003C (v01 052807 OEMMCFG 20070528 MSFT 00000097)
ACPI: OEMB 7ffde040 00071 (v01 052807 OEMB1129 20070528 MSFT 00000097)
ACPI: HPET 7ffd4a10 00038 (v01 052807 OEMHPET 20070528 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
1155MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x7ffcffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0x7ffcffff]
On node 0 totalpages: 524127
free_area_init_node: node 0, pgdat c18a0840, node_mem_map f5334200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 2312 pages used for memmap
HighMem zone: 293578 pages, LIFO batch:31
Using APIC driver default
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
e820: [mem 0x80000000-0xfff7ffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7bd5000 s34176 r0 d23168 u57344
pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520031
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
allocated 4193792 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0007ffd0)
Memory: 2049744k/2096960k available (5956k kernel code, 46764k reserved, 2928k data, 756k init, 1183560k highmem)
virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc18ae000 - 0xc196b000 ( 756 kB)
.data : 0xc15d1358 - 0xc18ad6c0 (2928 kB)
.text : 0xc1000000 - 0xc15d1358 (5956 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f4c08000 soft=f4c0a000
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration failed
TSC: Unable to calibrate against PIT
TSC: using HPET reference calibration
Detected 2593.529 MHz processor.
Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.05 BogoMIPS (lpj=10374116)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
LVT offset 0 assigned for vector 0xf9
using AMD E400 aware idle routine
ACPI: Core revision 20120320
ftrace: allocating 24585 entries in 49 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 01
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU 1 irqstacks, hard=f4cc2000 soft=f4cc4000
Booting Node 0, Processors #1 Ok.
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (10374.55 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x7ffde000-0x7fffffff] (139264 bytes)
dummy:
RTC time: 9:10:14, date: 03/11/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
EISA bus registered
node 0 link 0: io port [1000, ffffff]
TOM: 0000000080000000 aka 2048M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [80000000, dfffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [f0000000, ffffffff]
bus: [00, ff] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x80000000-0xfcffffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Detected MSI hardware, enabling workarounds.
ACPI: EC: Look up EC in DSDT
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: >host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: >host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: >host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: >host bridge window [mem 0x000d0000-0x000dffff] (ignored)
pci_root PNP0A03:00: >host bridge window [mem 0x80000000-0xdfffffff] (ignored)
pci_root PNP0A03:00: >host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
PCI: root bus 00: hardware-probed resources
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: >root bus resource [mem 0x80000000-0xfcffffffff]
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci 0000:00:00.0: >[1002:7910] type 00 class 0x060000
pci 0000:00:02.0: >[1002:7913] type 01 class 0x060400
pci 0000:00:02.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: >[1002:7917] type 01 class 0x060400
pci 0000:00:07.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:12.0: >[1002:4380] type 00 class 0x01018f
pci 0000:00:12.0: >reg 10: [io 0xc000-0xc007]
pci 0000:00:12.0: >reg 14: [io 0xb000-0xb003]
pci 0000:00:12.0: >reg 18: [io 0xa000-0xa007]
pci 0000:00:12.0: >reg 1c: [io 0x9000-0x9003]
pci 0000:00:12.0: >reg 20: [io 0x8000-0x800f]
pci 0000:00:12.0: >reg 24: [mem 0xfe9ff800-0xfe9ffbff]
pci 0000:00:12.0: >set SATA to AHCI mode
pci 0000:00:13.0: >[1002:4387] type 00 class 0x0c0310
pci 0000:00:13.0: >reg 10: [mem 0xfe9fe000-0xfe9fefff]
pci 0000:00:13.1: >[1002:4388] type 00 class 0x0c0310
pci 0000:00:13.1: >reg 10: [mem 0xfe9fd000-0xfe9fdfff]
pci 0000:00:13.2: >[1002:4389] type 00 class 0x0c0310
pci 0000:00:13.2: >reg 10: [mem 0xfe9fc000-0xfe9fcfff]
pci 0000:00:13.3: >[1002:438a] type 00 class 0x0c0310
pci 0000:00:13.3: >reg 10: [mem 0xfe9fb000-0xfe9fbfff]
pci 0000:00:13.4: >[1002:438b] type 00 class 0x0c0310
pci 0000:00:13.4: >reg 10: [mem 0xfe9fa000-0xfe9fafff]
pci 0000:00:13.5: >[1002:4386] type 00 class 0x0c0320
pci 0000:00:13.5: >reg 10: [mem 0xfe9ff000-0xfe9ff0ff]
pci 0000:00:13.5: >supports D1 D2
pci 0000:00:13.5: >PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: >[1002:4385] type 00 class 0x0c0500
pci 0000:00:14.0: >reg 10: [io 0x0b00-0x0b0f]
pci 0000:00:14.1: >[1002:438c] type 00 class 0x01018a
pci 0000:00:14.1: >reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: >reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: >reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: >reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: >reg 20: [io 0xff00-0xff0f]
pci 0000:00:14.2: >[1002:4383] type 00 class 0x040300
pci 0000:00:14.2: >reg 10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
pci 0000:00:14.2: >PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: >[1002:438d] type 00 class 0x060100
pci 0000:00:14.4: >[1002:4384] type 01 class 0x060401
pci 0000:00:18.0: >[1022:1100] type 00 class 0x060000
pci 0000:00:18.1: >[1022:1101] type 00 class 0x060000
pci 0000:00:18.2: >[1022:1102] type 00 class 0x060000
pci 0000:00:18.3: >[1022:1103] type 00 class 0x060000
pci 0000:01:00.0: >[1002:6759] type 00 class 0x030000
pci 0000:01:00.0: >reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: >reg 18: [mem 0xfeae0000-0xfeafffff 64bit]
pci 0000:01:00.0: >reg 20: [io 0xd000-0xd0ff]
pci 0000:01:00.0: >reg 30: [mem 0xfeac0000-0xfeadffff pref]
pci 0000:01:00.0: >supports D1 D2
pci 0000:01:00.1: >[1002:aa90] type 00 class 0x040300
pci 0000:01:00.1: >reg 10: [mem 0xfeabc000-0xfeabffff 64bit]
pci 0000:01:00.1: >supports D1 D2
pci 0000:00:02.0: >PCI bridge to [bus 01-01]
pci 0000:00:02.0: > bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: > bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: > bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: >[10ec:8136] type 00 class 0x020000
pci 0000:02:00.0: >reg 10: [io 0xe800-0xe8ff]
pci 0000:02:00.0: >reg 18: [mem 0xfebff000-0xfebfffff 64bit]
pci 0000:02:00.0: >reg 30: [mem 0xfebc0000-0xfebdffff pref]
pci 0000:02:00.0: >supports D1 D2
pci 0000:02:00.0: >PME# supported from D1 D2 D3hot D3cold
pci 0000:02:00.0: >disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:07.0: >PCI bridge to [bus 02-02]
pci 0000:00:07.0: > bridge window [io 0xe000-0xefff]
pci 0000:00:07.0: > bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:14.4: >PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:14.4: > bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x80000000-0xfcffffffff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci_bus 0000:00: >on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
pci0000:00: >Requesting ACPI _OSC control (0x1d)
pci0000:00: >ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7ffd0000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-ff]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0000-0x0cf7 window]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000d0000-0x000dffff window]
pnp 00:00: >[mem 0x80000000-0xdfffffff window]
pnp 00:00: >[mem 0xf0000000-0xfebfffff window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: >[dma 4]
pnp 00:01: >[io 0x0000-0x000f]
pnp 00:01: >[io 0x0081-0x0083]
pnp 00:01: >[io 0x0087]
pnp 00:01: >[io 0x0089-0x008b]
pnp 00:01: >[io 0x008f]
pnp 00:01: >[io 0x00c0-0x00df]
pnp 00:01: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: >[io 0x0070-0x0071]
pnp 00:02: >[irq 8]
pnp 00:02: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: >[io 0x0061]
pnp 00:03: >Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: >[io 0x00f0-0x00ff]
pnp 00:04: >[irq 13]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: >[io 0x03f0-0x03f5]
pnp 00:05: >[io 0x03f7]
pnp 00:05: >[irq 6]
pnp 00:05: >[dma 2]
pnp 00:05: >Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:06: >[io 0x0378-0x037f]
pnp 00:06: >[irq 7]
pnp 00:06: >[dma 0 disabled]
pnp 00:06: >Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:07: >[mem 0xfed00000-0xfed003ff]
pnp 00:07: >Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:08: >[mem 0xfec00000-0xfec00fff]
pnp 00:08: >[mem 0xfee00000-0xfee00fff]
system 00:08: >[mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: >[mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: >[io 0x0010-0x001f]
pnp 00:09: >[io 0x0022-0x003f]
pnp 00:09: >[io 0x0062-0x0063]
pnp 00:09: >[io 0x0065-0x006f]
pnp 00:09: >[io 0x0072-0x007f]
pnp 00:09: >[io 0x0080]
pnp 00:09: >[io 0x0084-0x0086]
pnp 00:09: >[io 0x0088]
pnp 00:09: >[io 0x008c-0x008e]
pnp 00:09: >[io 0x0090-0x009f]
pnp 00:09: >[io 0x00a2-0x00bf]
pnp 00:09: >[io 0x00b1]
pnp 00:09: >[io 0x00e0-0x00ef]
pnp 00:09: >[io 0x04d0-0x04d1]
pnp 00:09: >[io 0x040b]
pnp 00:09: >[io 0x04d6]
pnp 00:09: >[io 0x0c00-0x0c01]
pnp 00:09: >[io 0x0c14]
pnp 00:09: >[io 0x0c50-0x0c51]
pnp 00:09: >[io 0x0c52]
pnp 00:09: >[io 0x0c6c]
pnp 00:09: >[io 0x0c6f]
pnp 00:09: >[io 0x0cd0-0x0cd1]
pnp 00:09: >[io 0x0cd2-0x0cd3]
pnp 00:09: >[io 0x0cd4-0x0cd5]
pnp 00:09: >[io 0x0cd6-0x0cd7]
pnp 00:09: >[io 0x0cd8-0x0cdf]
pnp 00:09: >[io 0x0800-0x089f]
pnp 00:09: >[io 0x0b10-0x0b1f]
pnp 00:09: >[io 0x0000-0xffffffffffffffff disabled]
pnp 00:09: >[io 0x0900-0x090f]
pnp 00:09: >[io 0x0910-0x091f]
pnp 00:09: >[io 0xfe00-0xfefe]
pnp 00:09: >[mem 0xffb80000-0xffbfffff]
pnp 00:09: >[mem 0xfff80000-0xffffffff]
system 00:09: >[io 0x04d0-0x04d1] has been reserved
system 00:09: >[io 0x040b] has been reserved
system 00:09: >[io 0x04d6] has been reserved
system 00:09: >[io 0x0c00-0x0c01] has been reserved
system 00:09: >[io 0x0c14] has been reserved
system 00:09: >[io 0x0c50-0x0c51] has been reserved
system 00:09: >[io 0x0c52] has been reserved
system 00:09: >[io 0x0c6c] has been reserved
system 00:09: >[io 0x0c6f] has been reserved
system 00:09: >[io 0x0cd0-0x0cd1] has been reserved
system 00:09: >[io 0x0cd2-0x0cd3] has been reserved
system 00:09: >[io 0x0cd4-0x0cd5] has been reserved
system 00:09: >[io 0x0cd6-0x0cd7] has been reserved
system 00:09: >[io 0x0cd8-0x0cdf] has been reserved
system 00:09: >[io 0x0800-0x089f] has been reserved
system 00:09: >[io 0x0b10-0x0b1f] has been reserved
system 00:09: >[io 0x0900-0x090f] has been reserved
system 00:09: >[io 0x0910-0x091f] has been reserved
system 00:09: >[io 0xfe00-0xfefe] has been reserved
system 00:09: >[mem 0xffb80000-0xffbfffff] has been reserved
system 00:09: >[mem 0xfff80000-0xffffffff] has been reserved
system 00:09: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: >[io 0x0060]
pnp 00:0a: >[io 0x0064]
pnp 00:0a: >[irq 1]
pnp 00:0a: >Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0b: >[io 0x0000-0xffffffffffffffff disabled]
pnp 00:0b: >[io 0x0600-0x06df]
pnp 00:0b: >[io 0x0ae0-0x0aef]
system 00:0b: >[io 0x0600-0x06df] has been reserved
system 00:0b: >[io 0x0ae0-0x0aef] has been reserved
system 00:0b: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: >[mem 0xe0000000-0xefffffff]
system 00:0c: >[mem 0xe0000000-0xefffffff] has been reserved
system 00:0c: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: >[mem 0x00000000-0x0009ffff]
pnp 00:0d: >[mem 0x000c0000-0x000cffff]
pnp 00:0d: >[mem 0x000e0000-0x000fffff]
pnp 00:0d: >[mem 0x00100000-0x7fffffff]
pnp 00:0d: >[mem 0xfec00000-0xffffffff]
system 00:0d: >[mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: >[mem 0x000c0000-0x000cffff] could not be reserved
system 00:0d: >[mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: >[mem 0x00100000-0x7fffffff] could not be reserved
system 00:0d: >[mem 0xfec00000-0xffffffff] could not be reserved
system 00:0d: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:02.0: >PCI bridge to [bus 01-01]
pci 0000:00:02.0: > bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: > bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: > bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: >PCI bridge to [bus 02-02]
pci 0000:00:07.0: > bridge window [io 0xe000-0xefff]
pci 0000:00:07.0: > bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:14.4: >PCI bridge to [bus 03-03]
pci_bus 0000:00: >resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: >resource 5 [mem 0x80000000-0xfcffffffff]
pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: >resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: >resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: >resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: >resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: >resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:03: >resource 4 [io 0x0000-0xffff]
pci_bus 0000:03: >resource 5 [mem 0x80000000-0xfcffffffff]
pci_bus 0000:03: >resource 6 [mem 0x000a0000-0x000bffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
Freeing initrd memory: 14712k freed
pci 0000:01:00.0: >Boot video device
PCI: CLS 64 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1362993014.628:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 1720
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: >irq 40 for MSI/MSI-X
pcieport 0000:00:07.0: >irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: duty_cycle spans bit 4
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:12.0: >version 3.0
ahci 0000:00:12.0: >controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: >AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: >flags: ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ff900 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ff980 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ffa00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ffa80 irq 22
pata_acpi 0000:00:14.1: >setting latency timer to 64
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:13.5: >EHCI Host Controller
ehci_hcd 0000:00:13.5: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.5: >applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.5: >debug port 1
ehci_hcd 0000:00:13.5: >irq 19, io mem 0xfe9ff000
ehci_hcd 0000:00:13.5: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb1: >SerialNumber: 0000:00:13.5
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: >OHCI Host Controller
ohci_hcd 0000:00:13.0: >new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: >irq 16, io mem 0xfe9fe000
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: OHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb2: >SerialNumber: 0000:00:13.0
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >2 ports detected
ohci_hcd 0000:00:13.1: >OHCI Host Controller
ohci_hcd 0000:00:13.1: >new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: >irq 17, io mem 0xfe9fd000
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: OHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb3: >SerialNumber: 0000:00:13.1
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >2 ports detected
ohci_hcd 0000:00:13.2: >OHCI Host Controller
ohci_hcd 0000:00:13.2: >new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: >irq 18, io mem 0xfe9fc000
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: OHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb4: >SerialNumber: 0000:00:13.2
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >2 ports detected
ohci_hcd 0000:00:13.3: >OHCI Host Controller
ohci_hcd 0000:00:13.3: >new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.3: >irq 17, io mem 0xfe9fb000
usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: >Product: OHCI Host Controller
usb usb5: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb5: >SerialNumber: 0000:00:13.3
hub 5-0:1.0: >USB hub found
hub 5-0:1.0: >2 ports detected
ohci_hcd 0000:00:13.4: >OHCI Host Controller
ohci_hcd 0000:00:13.4: >new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.4: >irq 18, io mem 0xfe9fa000
usb usb6: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: >Product: OHCI Host Controller
usb usb6: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb6: >SerialNumber: 0000:00:13.4
hub 6-0:1.0: >USB hub found
hub 6-0:1.0: >2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: >RTC can wake from S4
rtc_cmos 00:02: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
Magic number: 5:376:171
rtc_cmos 00:02: >setting system clock to 2013-03-11 09:10:15 UTC (1362993015)
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ (2 cpu cores) (version 2.20.00)
[Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: Try again with latest BIOS.
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
isapnp: No Plug & Play device found
ata1: softreset failed (device not ready)
ata1: applying PMP SRST workaround and retrying
ata2: softreset failed (device not ready)
ata2: applying PMP SRST workaround and retrying
usb 1-9: >new high-speed USB device number 4 using ehci_hcd
usb 1-9: >New USB device found, idVendor=058f, idProduct=6362
usb 1-9: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-9: >Product: Mass Storage Device
usb 1-9: >Manufacturer: Generic
usb 1-9: >SerialNumber: 058F312D81B
Initializing USB Mass Storage driver...
scsi4 : usb-storage 1-9:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATAPI: TSSTcorp CDDVDW SH-S203D, SB00, max UDMA/100
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/100
scsi 0:0:0:0: >CD-ROM TSSTcorp CDDVDW SH-S203D SB00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: >Attached scsi CD-ROM sr0
sr 0:0:0:0: >Attached scsi generic sg0 type 5
ata2.00: ATA-8: SAMSUNG HD320KJ, CP100-11, max UDMA7
ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: configured for UDMA/133
scsi 1:0:0:0: >Direct-Access ATA SAMSUNG HD320KJ CP10 PQ: 0 ANSI: 5
sd 1:0:0:0: >[sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 1:0:0:0: >Attached scsi generic sg1 type 0
sd 1:0:0:0: >[sda] Write Protect is off
sd 1:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 1:0:0:0: >[sda] Attached SCSI disk
Freeing unused kernel memory: 756k freed
Write protecting the kernel text: 5960k
Write protecting the kernel read-only data: 2424k
NX-protecting the kernel data: 4280k
udevd[104]: starting version 175
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: >irq 42 for MSI/MSI-X
r8169 0000:02:00.0: >eth0: RTL8101e at 0xf8446000, 00:19:db:b7:63:0b, XID 14000000 IRQ 42
scsi5 : pata_atiixp
scsi6 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
usb 2-2: >new low-speed USB device number 2 using ohci_hcd
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
usb 2-2: >New USB device found, idVendor=046d, idProduct=c016
usb 2-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: >Product: Optical USB Mouse
usb 2-2: >Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input3
hid-generic 0003:046D:C016.0001: >input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:13.0-2/input0
usb 3-2: >new full-speed USB device number 2 using ohci_hcd
scsi 4:0:0:0: >Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
scsi 4:0:0:1: >Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
scsi 4:0:0:2: >Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
scsi 4:0:0:3: >Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 4:0:0:0: >Attached scsi generic sg2 type 0
sd 4:0:0:1: >Attached scsi generic sg3 type 0
sd 4:0:0:2: >Attached scsi generic sg4 type 0
sd 4:0:0:3: >Attached scsi generic sg5 type 0
sd 4:0:0:1: >[sdc] Attached SCSI removable disk
sd 4:0:0:2: >[sdd] Attached SCSI removable disk
sd 4:0:0:3: >[sde] Attached SCSI removable disk
sd 4:0:0:0: >[sdb] Attached SCSI removable disk
usb 3-2: >New USB device found, idVendor=0d8c, idProduct=000e
usb 3-2: >New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-2: >Product: Generic USB Audio Device
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 2096124k swap on /dev/sda5. Priority:-1 extents:1 across:2096124k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[347]: starting version 175
lp: driver loaded but no devices found
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[fglrx] Maximum main memory to use for locked dma buffers: 1889 MBytes.
[fglrx] vendor: 1002 device: 6759 count: 1
[fglrx] ioport: bar 4, base 0xd000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 9.1.11 [Dec 19 2012] with 1 minors
ACPI Warning: 0x00000b00-0x00000b07 SystemIO conflicts with Region \SMOV 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
sp5100_tco: mmio address 0xfec000f0 already in use
parport_pc 00:06: >reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
cm109: Keymap for Komunikate KIP1000 phone loaded
input: CM109 USB driver as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.3/input/input4
usbcore: registered new interface driver cm109
cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
lp0: using parport0 (interrupt-driven).
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: >irq 43 for MSI/MSI-X
k8temp 0000:00:18.3: >Temperature readouts might be wrong - check erratum #141
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
usbcore: registered new interface driver snd-usb-audio
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
ppdev: user-space parallel port driver
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1362993027.750:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=755 comm="apparmor_parser"
type=1400 audit(1362993027.750:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=755 comm="apparmor_parser"
microcode: AMD CPU family 0xf not supported
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
kvm: Nested Virtualization enabled
microcode: AMD CPU family 0xf not supported
init: failsafe main process (811) killed by TERM signal
type=1400 audit(1362993028.050:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=927 comm="apparmor_parser"
type=1400 audit(1362993028.050:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=927 comm="apparmor_parser"
type=1400 audit(1362993028.058:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=928 comm="apparmor_parser"
type=1400 audit(1362993028.058:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=928 comm="apparmor_parser"
r8169 0000:02:00.0: >eth0: link down
r8169 0000:02:00.0: >eth0: link down
type=1400 audit(1362993028.074:8): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=932 comm="apparmor_parser"
type=1400 audit(1362993028.074:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=929 comm="apparmor_parser"
type=1400 audit(1362993028.078:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=929 comm="apparmor_parser"
type=1400 audit(1362993028.078:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=932 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=1 offMin=0x5976 offMax=0x5976
vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.1.18_Ubuntu (interface 0x00190000).
vboxpci: IOMMU not found (not registered)
vesafb: mode is 1400x1050x32, linelength=5632, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xf9000000, using 5824k, total 5824k
Console: switching to colour frame buffer device 175x65
fb0: VESA VGA frame buffer device
init: gdm main process (1165) killed by TERM signal
fglrx_pci 0000:01:00.0: >irq 44 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1305
[fglrx] Firegl kernel thread PID: 1306
[fglrx] Firegl kernel thread PID: 1307
[fglrx] IRQ 44 Enabled
[fglrx] Gart USWC size:632 M.
[fglrx] Gart cacheable size:248 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fb04000, size:1fc000
[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
r8169 0000:02:00.0: >eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
quiet_error: 39 callbacks suppressed
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 2
EXT3-fs (fd0): error: unable to read superblock
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 2
EXT4-fs (fd0): unable to read superblock
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
FAT-fs (fd0): unable to read boot sector