dmesg - prueba2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-45-generic (buildd@lamiak) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #100-Ubuntu SMP Wed Nov 14 10:41:11 UTC 2012 (Ubuntu 2.6.32-45.100-generic 2.6.32.60+drm33.26)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0xcffb0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000120000000 aka 4608M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009f800 (usable)
modified: 000000000009f800 - 00000000000a0000 (reserved)
modified: 00000000000e7000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000cffb0000 (usable)
modified: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
modified: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
modified: 00000000cfff0000 - 00000000d0000000 (reserved)
modified: 00000000fec00000 - 00000000fec01000 (reserved)
modified: 00000000fee00000 - 00000000fef00000 (reserved)
modified: 00000000fff00000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000120000000 (usable)
initial memory mapped : 0 - 00c00000
init_memory_mapping: 0000000000000000-00000000377fe000
Using x86 segment limits to approximate NX protection
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 10000-15000
RAMDISK: 3784d000 - 37feff81
Allocated new RAMDISK: 008ea000 - 0108cf81
Move RAMDISK from 000000003784d000 - 0000000037feff80 to 008ea000 - 0108cf80
ACPI: RSDP 000fb580 00014 (v00 ACPIAM)
ACPI: RSDT cffb0000 00044 (v01 A_M_I OEMRSDT 03001103 MSFT 00000097)
ACPI: FACP cffb0200 00084 (v02 A_M_I OEMFACP 12000601 MSFT 00000097)
ACPI: DSDT cffb0460 0495C (v01 AS361 AS361143 00000143 INTL 20051117)
ACPI: FACS cffc0000 00040
ACPI: APIC cffb0390 00090 (v01 A_M_I OEMAPIC 03001103 MSFT 00000097)
ACPI: MCFG cffb0420 0003C (v01 A_M_I OEMMCFG 03001103 MSFT 00000097)
ACPI: OEMB cffc0040 00061 (v01 A_M_I AMI_OEM 03001103 MSFT 00000097)
ACPI: SRAT cffb4dc0 000B8 (v03 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: MSCT cffb4e80 0004E (v01 A M I OEMBOARD 00000001 AMD 00000001)
ACPI: AAFT cffb4ed0 00027 (v01 A_M_I OEMAAFT 03001103 MSFT 00000097)
ACPI: SSDT cffb4f00 0023E (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
2439MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
node 0 low ram: 00000000 - 377fe000
node 0 bootmap 00011000 - 00017f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00008e5ef8] TEXT DATA BSS ==> [0000100000 - 00008e5ef8]
#4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#5 [00008e6000 - 00008e912f] BRK ==> [00008e6000 - 00008e912f]
#6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#7 [00008ea000 - 000108cf81] NEW RAMDISK ==> [00008ea000 - 000108cf81]
#8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
found SMP MP-table at [c00ff780] ff780
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x000cffb0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000cffb0
On node 0 totalpages: 851775
free_area_init_node: node 0, pgdat c07a0800, node_mem_map c108e200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 4880 pages used for memmap
HighMem zone: 619682 pages, LIFO batch:31
Using APIC driver default
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 6 CPUs, 5 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e7000
PM: Registered nosave memory: 00000000000e7000 - 0000000000100000
Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c2c00000 s36056 r0 d21288 u524288
pcpu-alloc: s36056 r0 d21288 u524288 alloc=1*4194304
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 845119
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 17037440 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000377fe:000cffb0)
Memory: 3345392k/3407552k available (4702k kernel code, 60408k reserved, 2124k data, 664k init, 2498248k highmem)
virtual kernel memory layout:
fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc07ab000 - 0xc0851000 ( 664 kB)
.data : 0xc0597b47 - 0xc07aadc8 (2124 kB)
.text : 0xc0100000 - 0xc0597b47 (4702 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:2304 nr_irqs:456
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2813.035 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5626.07 BogoMIPS (lpj=11252140)
Security Framework initialized
AppArmor: AppArmor initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
mce: CPU supports 6 MCE banks
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21848 entries in 43 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: AMD Sempron(tm) 145 Processor stepping 03
Brought up 1 CPUs
Total of 1 processors activated (5626.07 BogoMIPS).
CPU0 attaching NULL sched-domain.
devtmpfs: initialized
regulator: core version 0.5
Time: 14:41:04 Date: 02/22/13
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31
PCI: MCFG area at fc000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI Warning: Incorrect checksum in table [OEMB] - 84, should be 7F (20090903/tbutils-314)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: reg 10 io port: [0x900-0x9ff]
pci 0000:00:01.1: reg 10 io port: [0xec00-0xec3f]
pci 0000:00:01.1: reg 20 io port: [0x600-0x63f]
pci 0000:00:01.1: reg 24 io port: [0x700-0x73f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10 32bit mmio: [0xfbeff000-0xfbefffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10 32bit mmio: [0xfbefec00-0xfbefecff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:05.0: reg 10 32bit mmio: [0xfbef8000-0xfbefbfff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:07.0: reg 10 32bit mmio: [0xfbefd000-0xfbefdfff]
pci 0000:00:07.0: reg 14 io port: [0xe480-0xe487]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: reg 10 io port: [0xe400-0xe407]
pci 0000:00:08.0: reg 14 io port: [0xe080-0xe083]
pci 0000:00:08.0: reg 18 io port: [0xe000-0xe007]
pci 0000:00:08.0: reg 1c io port: [0xdc00-0xdc03]
pci 0000:00:08.0: reg 20 io port: [0xd880-0xd88f]
pci 0000:00:08.0: reg 24 32bit mmio: [0xfbefc000-0xfbefcfff]
pci 0000:00:08.1: reg 10 io port: [0xd800-0xd807]
pci 0000:00:08.1: reg 14 io port: [0xd480-0xd483]
pci 0000:00:08.1: reg 18 io port: [0xd400-0xd407]
pci 0000:00:08.1: reg 1c io port: [0xd080-0xd083]
pci 0000:00:08.1: reg 20 io port: [0xd000-0xd00f]
pci 0000:00:08.1: reg 24 32bit mmio: [0xfbef7000-0xfbef7fff]
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
pci 0000:00:0d.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
pci 0000:00:0d.0: reg 1c 64bit mmio: [0xf9000000-0xf9ffffff]
pci 0000:00:0d.0: reg 30 32bit mmio pref: [0xfbec0000-0xfbedffff]
pci 0000:01:0a.0: reg 10 32bit mmio: [0xfbff0000-0xfbffffff]
pci 0000:00:04.0: transparent bridge
pci 0000:00:04.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
ACPI Warning for \_SB_.LATA._CRS: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
ACPI Error (uteval-0307): Return object type is incorrect [\_SB_.LATA._CRS] (Node f70161f8), AE_TYPE
ACPI Error: Type returned from _CRS was incorrect: Integer, expected Btypes: 4 (20090903/uteval-313)
ACPI Exception: AE_TYPE, Evaluating _CRS (20090903/pci_link-282)
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: WMI: Mapper loaded
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource tsc
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:0b: [Firmware Bug]: [0x000000-0xffffffff] covers only part of AMD MMCONFIG area [0xfc000000-0xfdffffff]; adding more reservations
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:06: ioport range 0x500-0x57f has been reserved
system 00:06: ioport range 0x580-0x5ff has been reserved
system 00:06: ioport range 0x800-0x87f has been reserved
system 00:06: ioport range 0x880-0x8ff has been reserved
system 00:06: ioport range 0xd00-0xd7f has been reserved
system 00:06: ioport range 0xd80-0xdff has been reserved
system 00:06: ioport range 0x1100-0x117f has been reserved
system 00:06: ioport range 0x1180-0x11ff has been reserved
system 00:06: iomem range 0xfec80000-0xfd93ffff could not be reserved
system 00:06: iomem range 0xfefe0000-0xfefe01ff has been reserved
system 00:06: iomem range 0xfefe1000-0xfefe1fff has been reserved
system 00:06: iomem range 0xfee01000-0xfeefffff has been reserved
system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:09: ioport range 0x280-0x28f has been reserved
system 00:09: ioport range 0x290-0x29f has been reserved
system 00:0a: iomem range 0xfc000000-0xfdffffff has been reserved
system 00:0b: iomem range 0x0-0x9ffff could not be reserved
system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
system 00:0b: iomem range 0x100000-0xdfffffff could not be reserved
system 00:0b: iomem range 0xff380000-0xffffffff could not be reserved
pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
pci 0000:00:04.0: IO window: disabled
pci 0000:00:04.0: MEM window: 0xfbf00000-0xfbffffff
pci 0000:00:04.0: PREFETCH window: disabled
pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
pci 0000:00:09.0: IO window: disabled
pci 0000:00:09.0: MEM window: disabled
pci 0000:00:09.0: PREFETCH window: disabled
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
pci 0000:00:0b.0: IO window: disabled
pci 0000:00:0b.0: MEM window: disabled
pci 0000:00:0b.0: PREFETCH window: disabled
pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:0c.0: IO window: disabled
pci 0000:00:0c.0: MEM window: disabled
pci 0000:00:0c.0: PREFETCH window: disabled
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 1 mem: [0xfbf00000-0xfbffffff]
pci_bus 0000:01: resource 3 io: [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
pci 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:02.0: PCI INT A disabled
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
pci 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:02.1: PCI INT B disabled
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Boot video device
cpufreq-nforce2: No nForce2 chipset.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1361544063.000:1): initialized
Trying to unpack rootfs image as initramfs...
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.13)
msgmni has been set to 1657
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:09.0: irq 24 for MSI/MSI-X
pcieport 0000:00:09.0: setting latency timer to 64
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:0b.0: irq 25 for MSI/MSI-X
pcieport 0000:00:0b.0: setting latency timer to 64
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:0c.0: irq 26 for MSI/MSI-X
pcieport 0000:00:0c.0: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
processor LNXCPU:00: registered as cooling_device0
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
pata_acpi 0000:00:06.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
pata_acpi 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
pata_acpi 0000:00:08.0: setting latency timer to 64
pata_acpi 0000:00:08.0: PCI INT A disabled
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
pata_acpi 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
pata_acpi 0000:00:08.1: setting latency timer to 64
pata_acpi 0000:00:08.1: PCI INT B disabled
Fixed MDIO Bus: probed
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 22, io mem 0xfbefec00
isapnp: Scanning for PnP cards...
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 23, io mem 0xfbeff000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.1.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Sempron(tm) 145 Processor processors (1 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (2800 MHz)
powernow-k8: 1 : pstate 1 (2000 MHz)
powernow-k8: 2 : pstate 2 (1600 MHz)
powernow-k8: 3 : pstate 3 (800 MHz)
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Magic number: 1:246:688
rtc_cmos 00:02: setting system clock to 2013-02-22 14:41:04 UTC (1361544064)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing initrd memory: 7819k freed
isapnp: No Plug & Play device found
Freeing unused kernel memory: 664k freed
Write protecting the kernel text: 4704k
Write protecting the kernel read-only data: 1848k
udev: starting version 151
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
forcedeth 0000:00:07.0: setting latency timer to 64
usb 2-3: new low speed USB device using ohci_hcd and address 2
ata2: port disabled. ignoring.
usb 2-3: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input3
generic-usb 0003:04D9:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:02.0-3/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input4
generic-usb 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:02.0-3/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:25:22:a8:74:ac
forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
sata_nv 0000:00:08.0: version 3.5
sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:08.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xd880 irq 21
ata4: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd888 irq 21
sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
sata_nv 0000:00:08.1: setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd000 irq 20
ata6: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xd008 irq 20
usb 2-4: new low speed USB device using ohci_hcd and address 3
ata3: SATA link down (SStatus 0 SControl 300)
usb 2-4: configuration #1 chosen from 1 choice
input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input5
generic-usb 0003:0461:4D64.0003: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:02.0-4/input0
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata5.00: configured for UDMA/133
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS70, EX00, max UDMA/100
ata4.00: configured for UDMA/100
scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS70 EX00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg0 type 5
scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD502HI 1AG0 PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 > sda3 sda4
sd 4:0:0:0: [sda] Attached SCSI disk
ata6: SATA link down (SStatus 0 SControl 300)
EXT4-fs (sda3): mounted filesystem with ordered data mode
udev: starting version 151
Adding 5990392k swap on /dev/sda6. Priority:-1 extents:1 across:5990392k
lp: driver loaded but no devices found
i2c i2c-0: nForce2 SMBus adapter at 0x600
i2c i2c-1: nForce2 SMBus adapter at 0x700
Linux agpgart interface v0.103
cfg80211: Calling CRDA to update world regulatory domain
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[drm] Initialized drm 1.1.0 20060810
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ppdev: user-space parallel port driver
type=1505 audit(1361544074.665:2): operation="profile_load" pid=585 name="/sbin/dhclient3"
type=1505 audit(1361544074.665:3): operation="profile_load" pid=585 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1505 audit(1361544074.665:4): operation="profile_load" pid=585 name="/usr/lib/connman/scripts/dhclient-script"
type=1505 audit(1361544074.665:5): operation="profile_replace" pid=614 name="/sbin/dhclient3"
type=1505 audit(1361544074.665:6): operation="profile_replace" pid=614 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1505 audit(1361544074.665:7): operation="profile_replace" pid=614 name="/usr/lib/connman/scripts/dhclient-script"
lp0: using parport0 (interrupt-driven).
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
ath9k 0000:01:0a.0: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19
ath: EEPROM regdomain: 0x809c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x52
ath: Country alpha2 being used: CN
ath: Regpair used: 0x52
ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 22
nouveau 0000:00:0d.0: PCI INT A -> Link[LMC9] -> GSI 22 (level, low) -> IRQ 22
nouveau 0000:00:0d.0: setting latency timer to 64
[drm] nouveau 0000:00:0d.0: failed to evaluate _DSM: 5
[drm] nouveau 0000:00:0d.0: Detected an NV40 generation card (0x04c000a2)
[drm] nouveau 0000:00:0d.0: Attempting to load BIOS image from PROM
[drm] nouveau 0000:00:0d.0: ... BIOS signature not found
[drm] nouveau 0000:00:0d.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:00:0d.0: ... appears to be valid
[drm] nouveau 0000:00:0d.0: BIT BIOS found
[drm] nouveau 0000:00:0d.0: Bios version 05.61.32.28
[drm] nouveau 0000:00:0d.0: BIT table 'd' not found
[drm] nouveau 0000:00:0d.0: Found Display Configuration Block version 3.0
[drm] nouveau 0000:00:0d.0: DCB connector table: VHER 0x30 5 10 2
[drm] nouveau 0000:00:0d.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff
[drm] nouveau 0000:00:0d.0: 1: 0x00001131: type 0x31 idx 1 tag 0x07
[drm] nouveau 0000:00:0d.0: 2: 0x00000110: type 0x10 idx 1 tag 0xff
[drm] nouveau 0000:00:0d.0: 3: 0x00000111: type 0x11 idx 1 tag 0xff
[drm] nouveau 0000:00:0d.0: 4: 0x00000113: type 0x13 idx 1 tag 0xff
[drm] nouveau 0000:00:0d.0: Raw DCB entry 0: 01000310 00000023
[drm] nouveau 0000:00:0d.0: Raw DCB entry 1: 00110204 942b0003
[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 0 at offset 0xD9C9
[drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D =======
[drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D =======
[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 1 at offset 0xDB17
[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 2 at offset 0xDB18
[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 3 at offset 0xDC9A
[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 4 at offset 0xDCE3
[TTM] Zone kernel: Available graphics memory: 428464 kiB.
[TTM] Zone highmem: Available graphics memory: 1677588 kiB.
[drm] nouveau 0000:00:0d.0: 256 MiB VRAM
[drm] nouveau 0000:00:0d.0: 64 MiB GART (aperture)
[drm] nouveau 0000:00:0d.0: Allocating FIFO number 0
[drm] nouveau 0000:00:0d.0: nouveau_channel_alloc: initialised FIFO 0
[drm] nouveau 0000:00:0d.0: Initial CRTC_OWNER is 0
[drm] nouveau 0000:00:0d.0: Saving VGA fonts
[drm] nouveau 0000:00:0d.0: DCB type 4 not known
[drm] nouveau 0000:00:0d.0: Detected a VGA connector
[drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0)
[drm] nouveau 0000:00:0d.0: allocated 1440x900 fb: 0x49000, bo f3d3a400
fb0: nouveaufb frame buffer device
registered panic notifier
[drm] Initialized nouveau 0.0.15 20090420 for 0000:00:0d.0 on minor 0
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:00:05.0: setting latency timer to 64
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
vga16fb: not registering due to another framebuffer present
phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0::radio
Registered led device: ath9k-phy0::assoc
Registered led device: ath9k-phy0::tx
Registered led device: ath9k-phy0::rx
phy0: Atheros AR9287 MAC/BB Rev:2 AR5133 RF Rev:ff: mem=0xf87e0000, irq=19
cfg80211: Calling CRDA for country: CN
cfg80211: Regulatory domain changed to country: CN
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0)
[drm] nouveau 0000:00:0d.0: Output VGA-1 is running on CRTC 0 using output A
EXT4-fs (sda4): mounted filesystem with ordered data mode
Console: switching to colour frame buffer device 180x56
type=1505 audit(1361544076.165:8): operation="profile_load" pid=829 name="/usr/share/gdm/guest-session/Xsession"
type=1505 audit(1361544076.165:9): operation="profile_replace" pid=892 name="/sbin/dhclient3"
type=1505 audit(1361544076.165:10): operation="profile_replace" pid=892 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1505 audit(1361544076.165:11): operation="profile_replace" pid=892 name="/usr/lib/connman/scripts/dhclient-script"
ADDRCONF(NETDEV_UP): wlan0: link is not ready
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
forcedeth 0000:00:07.0: irq 27 for MSI/MSI-X
eth0: no link during initialization.
ADDRCONF(NETDEV_UP): eth0: link is not ready
vboxdrv: Found 1 processor cores.
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.4 (interface 0x001a0004).
[drm] nouveau 0000:00:0d.0: Allocating FIFO number 1
[drm] nouveau 0000:00:0d.0: nouveau_channel_alloc: initialised FIFO 1
vboxpci: IOMMU not found (not compiled)
wlan0: deauthenticating from 00:15:6d:4e:af:20 by local choice (reason=3)
wlan0: direct probe to AP 00:15:6d:4e:af:1d (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:15:6d:4e:af:1d (try 1)
wlan0: authenticated
wlan0: associate with AP 00:15:6d:4e:af:1d (try 1)
wlan0: RX AssocResp from 00:15:6d:4e:af:1d (capab=0x421 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
EXT4-fs (sda5): mounted filesystem with ordered data mode
ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020
ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020
ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x40000020