dmesg - stfu2950-1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-25-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #38-Ubuntu SMP Mon Feb 18 23:27:42 UTC 2013 (Ubuntu 3.5.0-25.38-generic 3.5.7.4)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x000000007fb4ffff] usable
BIOS-e820: [mem 0x000000007fb50000-0x000000007fb65fff] reserved
BIOS-e820: [mem 0x000000007fb66000-0x000000007fb85bff] ACPI data
BIOS-e820: [mem 0x000000007fb85c00-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable
NX (Execute Disable) protection: active
DMI 2.5 present.
DMI: Dell Inc. PowerEdge 2950/0M332H, BIOS 2.5.0 09/12/2008
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x880000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 3F80000000 write-back
1 base 0100000000 mask 3F00000000 write-back
2 base 0200000000 mask 3E00000000 write-back
3 base 0400000000 mask 3C00000000 write-back
4 base 0800000000 mask 3F80000000 write-back
5 base 007FC00000 mask 3FFFC00000 uncachable
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 4GB, range: 4GB, type WB
reg 2, base: 8GB, range: 8GB, type WB
reg 3, base: 16GB, range: 16GB, type WB
reg 4, base: 32GB, range: 2GB, type WB
reg 5, base: 2044MB, range: 4MB, type UC
total RAM covered: 32764M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 8M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2044MB, range: 4MB, type UC
reg 2, base: 4GB, range: 4GB, type WB
reg 3, base: 8GB, range: 8GB, type WB
reg 4, base: 16GB, range: 16GB, type WB
reg 5, base: 32GB, range: 2GB, type WB
e820: update [mem 0x7fc00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x7fb50 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x7fb4ffff]
[mem 0x00000000-0x7f9fffff] page 2M
[mem 0x7fa00000-0x7fb4ffff] page 4k
kernel direct mapping tables up to 0x7fb4ffff @ [mem 0x1fffc000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x87fffffff]
[mem 0x100000000-0x87fffffff] page 2M
kernel direct mapping tables up to 0x87fffffff @ [mem 0x7fb31000-0x7fb4ffff]
RAMDISK: [mem 0x362d8000-0x37163fff]
ACPI: RSDP 00000000000f2160 00024 (v02 DELL )
ACPI: XSDT 00000000000f21fc 00084 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 000000007fb83524 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 000000007fb66000 04996 (v01 DELL PE_SC3 00000001 INTL 20050624)
ACPI: FACS 000000007fb85c00 00040
ACPI: APIC 000000007fb83078 00092 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 000000007fb83130 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 000000007fb83184 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 000000007fb831c0 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WD__ 000000007fb83200 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 000000007fb83338 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 000000007fb6ab18 00210 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 000000007fb6ad28 0027C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 000000007fb6a998 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 000000007fb6a9c8 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 000000007fb834bc 00064 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000087fffffff]
Initmem setup node 0 [mem 0x00000000-0x87fffffff]
NODE_DATA [mem 0x87fffc000-0x87fffffff]
[ffffea0000000000-ffffea0021ffffff] PMD -> [ffff88085f600000-ffff88087f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x87fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009ffff]
node 0: [mem 0x00100000-0x7fb4ffff]
node 0: [mem 0x100000000-0x87fffffff]
On node 0 totalpages: 8387296
DMA zone: 64 pages used for memmap
DMA zone: 7 pages reserved
DMA zone: 3913 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 502672 pages, LIFO batch:31
Normal zone: 122880 pages used for memmap
Normal zone: 7741440 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 000000007fb50000 - 000000007fb66000
PM: Registered nosave memory: 000000007fb66000 - 000000007fb85000
PM: Registered nosave memory: 000000007fb85000 - 000000007fb86000
PM: Registered nosave memory: 000000007fb86000 - 0000000080000000
PM: Registered nosave memory: 0000000080000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
e820: [mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88087fc00000 s83584 r8192 d22912 u262144
pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8248025
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32927068k/35651584k available (6722k kernel code, 2102400k absent, 622116k reserved, 6448k data, 932k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:744 16
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2493.715 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4987.43 BogoMIPS (lpj=9974860)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 25149 entries in 99 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 0a
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (39899.98 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
dummy:
RTC time: 1:23:18, date: 02/22/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
PCI: Dell PowerEdge 2950 detected, enabling pci=bfsort.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff880853c57488), AE_NOT_FOUND (20120320/psparse-536)
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfdffffff]
pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xfdffffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: [8086:25c0] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:25e2] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:25e3] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [8086:25f8] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:25e5] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: [8086:25f9] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [8086:25e7] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [8086:25f0] type 00 class 0x060000
pci 0000:00:10.1: [8086:25f0] type 00 class 0x060000
pci 0000:00:10.2: [8086:25f0] type 00 class 0x060000
pci 0000:00:11.0: [8086:25f1] type 00 class 0x060000
pci 0000:00:13.0: [8086:25f3] type 00 class 0x060000
pci 0000:00:15.0: [8086:25f5] type 00 class 0x060000
pci 0000:00:16.0: [8086:25f6] type 00 class 0x060000
pci 0000:00:1c.0: [8086:2690] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:2688] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io 0xace0-0xacff]
pci 0000:00:1d.1: [8086:2689] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io 0xacc0-0xacdf]
pci 0000:00:1d.2: [8086:268a] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io 0xaca0-0xacbf]
pci 0000:00:1d.3: [8086:268b] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 20: [io 0xac80-0xac9f]
pci 0000:00:1d.7: [8086:268c] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xfcb00400-0xfcb007ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:2670] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2680] type 00 class 0x01018f
pci 0000:00:1f.2: reg 10: [io 0xac78-0xac7f]
pci 0000:00:1f.2: reg 14: [io 0xac70-0xac73]
pci 0000:00:1f.2: reg 18: [io 0xac60-0xac67]
pci 0000:00:1f.2: reg 1c: [io 0xac58-0xac5b]
pci 0000:00:1f.2: reg 20: [io 0xac40-0xac4f]
pci 0000:00:1f.2: reg 24: [mem 0xfcb00000-0xfcb003ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:04:00.0: [8086:3500] type 01 class 0x060400
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.3: [8086:350c] type 01 class 0x060400
pci 0000:04:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PCI bridge to [bus 04-09]
pci 0000:00:02.0: bridge window [mem 0xf2000000-0xf7ffffff]
pci 0000:05:00.0: [8086:3510] type 01 class 0x060400
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:01.0: [8086:3514] type 01 class 0x060400
pci 0000:05:01.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PCI bridge to [bus 05-08]
pci 0000:04:00.0: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:06:00.0: [1166:0103] type 01 class 0x060400
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PCI bridge to [bus 06-07]
pci 0000:05:00.0: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:07:00.0: [14e4:164c] type 00 class 0x020000
pci 0000:07:00.0: reg 10: [mem 0xf4000000-0xf5ffffff 64bit]
pci 0000:07:00.0: PME# supported from D3hot D3cold
pci 0000:06:00.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:05:01.0: PCI bridge to [bus 08-08]
pci 0000:04:00.3: PCI bridge to [bus 09-09]
pci 0000:01:00.0: [1000:0060] type 00 class 0x010400
pci 0000:01:00.0: reg 10: [mem 0xfca80000-0xfcabffff 64bit]
pci 0000:01:00.0: reg 18: [io 0xec00-0xecff]
pci 0000:01:00.0: reg 1c: [mem 0xfca40000-0xfca7ffff 64bit]
pci 0000:01:00.0: reg 30: [mem 0xfc900000-0xfc907fff pref]
pci 0000:01:00.0: supports D1
pci 0000:00:03.0: PCI bridge to [bus 01-01]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfc900000-0xfcafffff]
pci 0000:00:04.0: PCI bridge to [bus 0a-0a]
pci 0000:00:05.0: PCI bridge to [bus 0b-0b]
pci 0000:0c:00.0: [111d:8018] type 01 class 0x060400
pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PCI bridge to [bus 0c-0f]
pci 0000:00:06.0: bridge window [io 0xc000-0xdfff]
pci 0000:00:06.0: bridge window [mem 0xfc300000-0xfc8fffff]
pci 0000:0d:00.0: [111d:8018] type 01 class 0x060400
pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0d:01.0: [111d:8018] type 01 class 0x060400
pci 0000:0d:01.0: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.0: PCI bridge to [bus 0d-0f]
pci 0000:0c:00.0: bridge window [io 0xc000-0xdfff]
pci 0000:0c:00.0: bridge window [mem 0xfc400000-0xfc8fffff]
pci 0000:0e:00.0: [8086:10a4] type 00 class 0x020000
pci 0000:0e:00.0: reg 10: [mem 0xfc8c0000-0xfc8dffff]
pci 0000:0e:00.0: reg 14: [mem 0xfc8a0000-0xfc8bffff]
pci 0000:0e:00.0: reg 18: [io 0xdce0-0xdcff]
pci 0000:0e:00.0: reg 30: [mem 0xfc8e0000-0xfc8fffff pref]
pci 0000:0e:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0e:00.1: [8086:10a4] type 00 class 0x020000
pci 0000:0e:00.1: reg 10: [mem 0xfc880000-0xfc89ffff]
pci 0000:0e:00.1: reg 14: [mem 0xfc860000-0xfc87ffff]
pci 0000:0e:00.1: reg 18: [io 0xdcc0-0xdcdf]
pci 0000:0e:00.1: reg 30: [mem 0xfc8e0000-0xfc8fffff pref]
pci 0000:0e:00.1: PME# supported from D0 D3hot D3cold
pci 0000:0d:00.0: PCI bridge to [bus 0e-0e]
pci 0000:0d:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:0d:00.0: bridge window [mem 0xfc700000-0xfc8fffff]
pci 0000:0f:00.0: [8086:10a4] type 00 class 0x020000
pci 0000:0f:00.0: reg 10: [mem 0xfc6c0000-0xfc6dffff]
pci 0000:0f:00.0: reg 14: [mem 0xfc6a0000-0xfc6bffff]
pci 0000:0f:00.0: reg 18: [io 0xcce0-0xccff]
pci 0000:0f:00.0: reg 30: [mem 0xfc6e0000-0xfc6fffff pref]
pci 0000:0f:00.0: PME# supported from D0 D3hot
pci 0000:0f:00.1: [8086:10a4] type 00 class 0x020000
pci 0000:0f:00.1: reg 10: [mem 0xfc680000-0xfc69ffff]
pci 0000:0f:00.1: reg 14: [mem 0xfc660000-0xfc67ffff]
pci 0000:0f:00.1: reg 18: [io 0xccc0-0xccdf]
pci 0000:0f:00.1: reg 30: [mem 0xfc6e0000-0xfc6fffff pref]
pci 0000:0f:00.1: PME# supported from D0 D3hot
pci 0000:0d:01.0: PCI bridge to [bus 0f-0f]
pci 0000:0d:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:0d:01.0: bridge window [mem 0xfc500000-0xfc6fffff]
pci 0000:00:07.0: PCI bridge to [bus 10-10]
pci 0000:02:00.0: [1166:0103] type 01 class 0x060400
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:03:00.0: [14e4:164c] type 00 class 0x020000
pci 0000:03:00.0: reg 10: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:11:0d.0: [1002:515e] type 00 class 0x030000
pci 0000:11:0d.0: reg 10: [mem 0xd8000000-0xdfffffff pref]
pci 0000:11:0d.0: reg 14: [io 0xbc00-0xbcff]
pci 0000:11:0d.0: reg 18: [mem 0xfc2d0000-0xfc2dffff]
pci 0000:11:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:11:0d.0: supports D1 D2
pci 0000:00:1e.0: PCI bridge to [bus 11-11] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:1e.0: bridge window [mem 0xfc100000-0xfc2fffff]
pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfdffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.PE2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
pci0000:00: Requesting ACPI _OSC control (0x15)
pci0000:00: ACPI _OSC control (0x15) granted
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 *6 7 10 11 12)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 *5 6 7 10 11 12)
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 10 11 12) *15
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 10 11 12) *14
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 12) *15
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 *11 12)
vgaarb: device added: PCI:0000:11:0d.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:11:0d.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x7fb50000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x80000000-0xfdffffff window]
pnp 00:00: [mem 0xfed40000-0xfed44fff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0080-0x009f]
pnp 00:01: [io 0x0000-0x001f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io 0x00f0-0x00ff]
pnp 00:02: [irq 13]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: [io 0x0061]
system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:04: [io 0x0070-0x007f]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (disabled)
pnp 00:06: [io 0x03f8-0x03ff]
pnp 00:06: [irq 4]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: [io 0x02f8-0x02ff]
pnp 00:07: [irq 3]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: [io 0x0800-0x087f]
pnp 00:08: [io 0x0880-0x08bf]
pnp 00:08: [io 0x08c0-0x08df]
pnp 00:08: [io 0x08e0-0x08e3]
pnp 00:08: [io 0x0900]
pnp 00:08: [io 0x0c00-0x0c7f]
pnp 00:08: [io 0x0ca0-0x0ca7]
pnp 00:08: [io 0x0ca9-0x0cab]
pnp 00:08: [io 0x0cad-0x0caf]
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
system 00:08: [io 0x0800-0x087f] has been reserved
system 00:08: [io 0x0880-0x08bf] has been reserved
system 00:08: [io 0x08c0-0x08df] has been reserved
system 00:08: [io 0x08e0-0x08e3] has been reserved
system 00:08: [io 0x0900] has been reserved
system 00:08: [io 0x0c00-0x0c7f] has been reserved
system 00:08: [io 0x0ca0-0x0ca7] has been reserved
system 00:08: [io 0x0ca9-0x0cab] has been reserved
system 00:08: [io 0x0cad-0x0caf] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:09: [io 0x0ca8]
pnp 00:09: [io 0x0cac]
system 00:09: [io 0x0ca8] has been reserved
system 00:09: [io 0x0cac] has been reserved
system 00:09: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
pnp 00:0a: [mem 0xe0000000-0xefffffff]
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0xfed00000-0xfed003ff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:0e:00.1: address space collision: [mem 0xfc8e0000-0xfc8fffff pref] conflicts with 0000:0e:00.0 [mem 0xfc8e0000-0xfc8fffff pref]
pci 0000:0f:00.1: address space collision: [mem 0xfc6e0000-0xfc6fffff pref] conflicts with 0000:0f:00.0 [mem 0xfc6e0000-0xfc6fffff pref]
pci 0000:00:06.0: BAR 15: assigned [mem 0x80000000-0x801fffff pref]
pci 0000:06:00.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:05:00.0: PCI bridge to [bus 06-07]
pci 0000:05:00.0: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:05:01.0: PCI bridge to [bus 08-08]
pci 0000:04:00.0: PCI bridge to [bus 05-08]
pci 0000:04:00.0: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:04:00.3: PCI bridge to [bus 09-09]
pci 0000:00:02.0: PCI bridge to [bus 04-09]
pci 0000:00:02.0: bridge window [mem 0xf2000000-0xf7ffffff]
pci 0000:00:03.0: PCI bridge to [bus 01-01]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfc900000-0xfcafffff]
pci 0000:00:04.0: PCI bridge to [bus 0a-0a]
pci 0000:00:05.0: PCI bridge to [bus 0b-0b]
pci 0000:0c:00.0: BAR 15: assigned [mem 0x80000000-0x801fffff pref]
pci 0000:0d:00.0: BAR 15: assigned [mem 0x80000000-0x800fffff pref]
pci 0000:0d:01.0: BAR 15: assigned [mem 0x80100000-0x801fffff pref]
pci 0000:0e:00.1: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
pci 0000:0d:00.0: PCI bridge to [bus 0e-0e]
pci 0000:0d:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:0d:00.0: bridge window [mem 0xfc700000-0xfc8fffff]
pci 0000:0d:00.0: bridge window [mem 0x80000000-0x800fffff pref]
pci 0000:0f:00.1: BAR 6: assigned [mem 0x80100000-0x8011ffff pref]
pci 0000:0d:01.0: PCI bridge to [bus 0f-0f]
pci 0000:0d:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:0d:01.0: bridge window [mem 0xfc500000-0xfc6fffff]
pci 0000:0d:01.0: bridge window [mem 0x80100000-0x801fffff pref]
pci 0000:0c:00.0: PCI bridge to [bus 0d-0f]
pci 0000:0c:00.0: bridge window [io 0xc000-0xdfff]
pci 0000:0c:00.0: bridge window [mem 0xfc400000-0xfc8fffff]
pci 0000:0c:00.0: bridge window [mem 0x80000000-0x801fffff pref]
pci 0000:00:06.0: PCI bridge to [bus 0c-0f]
pci 0000:00:06.0: bridge window [io 0xc000-0xdfff]
pci 0000:00:06.0: bridge window [mem 0xfc300000-0xfc8fffff]
pci 0000:00:06.0: bridge window [mem 0x80000000-0x801fffff pref]
pci 0000:00:07.0: PCI bridge to [bus 10-10]
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:11:0d.0: BAR 6: assigned [mem 0xfc100000-0xfc11ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 11-11]
pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:1e.0: bridge window [mem 0xfc100000-0xfc2fffff]
pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x80000000-0xfdffffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:04: resource 1 [mem 0xf2000000-0xf7ffffff]
pci_bus 0000:05: resource 1 [mem 0xf4000000-0xf7ffffff]
pci_bus 0000:06: resource 1 [mem 0xf4000000-0xf7ffffff]
pci_bus 0000:07: resource 1 [mem 0xf4000000-0xf7ffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfc900000-0xfcafffff]
pci_bus 0000:0c: resource 0 [io 0xc000-0xdfff]
pci_bus 0000:0c: resource 1 [mem 0xfc300000-0xfc8fffff]
pci_bus 0000:0c: resource 2 [mem 0x80000000-0x801fffff pref]
pci_bus 0000:0d: resource 0 [io 0xc000-0xdfff]
pci_bus 0000:0d: resource 1 [mem 0xfc400000-0xfc8fffff]
pci_bus 0000:0d: resource 2 [mem 0x80000000-0x801fffff pref]
pci_bus 0000:0e: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:0e: resource 1 [mem 0xfc700000-0xfc8fffff]
pci_bus 0000:0e: resource 2 [mem 0x80000000-0x800fffff pref]
pci_bus 0000:0f: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:0f: resource 1 [mem 0xfc500000-0xfc6fffff]
pci_bus 0000:0f: resource 2 [mem 0x80100000-0x801fffff pref]
pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:03: resource 1 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:11: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:11: resource 1 [mem 0xfc100000-0xfc2fffff]
pci_bus 0000:11: resource 2 [mem 0xd8000000-0xdfffffff 64bit pref]
pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:11: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:11: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:11: resource 7 [mem 0x80000000-0xfdffffff]
pci_bus 0000:11: resource 8 [mem 0xfed40000-0xfed44fff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
pci 0000:11:0d.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x7bb31000-0x7fb30fff] (64MB) mapped at [ffff88007bb31000-ffff88007fb30fff]
audit: initializing netlink socket (disabled)
type=2000 audit(1361496198.400:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 32768
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:03.0: irq 41 for MSI/MSI-X
pcieport 0000:00:04.0: irq 42 for MSI/MSI-X
pcieport 0000:00:05.0: irq 43 for MSI/MSI-X
pcieport 0000:00:06.0: irq 44 for MSI/MSI-X
pcieport 0000:00:07.0: irq 45 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 46 for MSI/MSI-X
pcieport 0000:0d:00.0: irq 47 for MSI/MSI-X
pcieport 0000:0d:01.0: irq 48 for MSI/MSI-X
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pcieport 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:05:00.0: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:05:01.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.3: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
pcieport 0000:0c:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:0d:00.0: Signaling PME through PCIe PME interrupt
pci 0000:0e:00.0: Signaling PME through PCIe PME interrupt
pci 0000:0e:00.1: Signaling PME through PCIe PME interrupt
pcieport 0000:0d:01.0: Signaling PME through PCIe PME interrupt
pci 0000:0f:00.0: Signaling PME through PCIe PME interrupt
pci 0000:0f:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 23
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ERST: Failed to get Error Log Address Range.
Freeing initrd memory: 14896k freed
GHES: APEI firmware first mode is enabled by WHEA _OSC.
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [
P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xac78 ctl 0xac70 bmdma 0xac40 irq 23
ata2: SATA max UDMA/133 cmd 0xac60 ctl 0xac58 bmdma 0xac48 irq 23
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfcb00400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.5.0-25-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ace0
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.5.0-25-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000acc0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.5.0-25-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000aca0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.5.0-25-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000ac80
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.5.0-25-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 1:553:357
rtc_cmos 00:04: setting system clock to 2013-02-22 01:23:19 UTC (1361496199)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata2.01: NODEV after polling detection
ata2.00: ATAPI: TSSTcorpDVD-ROM TS-L333A, D100, max UDMA/33
ata2.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM TSSTcorp DVD-ROM TS-L333A D100 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 4x/24x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg0 type 5
Freeing unused kernel memory: 932k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1460k freed
Freeing unused kernel memory: 1120k freed
udevd[123]: starting version 175
megasas: 00.00.06.15-rc1 Mon. Mar. 19 17:00:00 PDT 2012
megasas: 0x1000:0x0060:0x1028:0x1f0c: bus 1:slot 0:func 0
megasas: FW now in Ready state
bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.1 (Dec 18, 2011)
bnx2 0000:03:00.0: eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 00:22:19:2a:1d:8e
e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
e1000e 0000:0e:00.0: Disabling ASPM L1
e1000e 0000:0e:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:0e:00.0: irq 49 for MSI/MSI-X
bnx2 0000:07:00.0: eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 00:22:19:2a:1d:90
megasas_init_mfi: fw_support_ieee=0
megasas: INIT adapter done
usb 1-1: new high-speed USB device number 2 using ehci_hcd
scsi2 : LSI SAS based MegaRAID driver
scsi 2:0:0:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5
scsi 2:0:1:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5
scsi 2:0:2:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5
scsi 2:0:3:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5
scsi 2:0:4:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5
scsi 2:0:5:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5
e1000e 0000:0e:00.0: eth2: (PCI Express:2.5GT/s:Width x4) 00:15:17:24:ef:a8
e1000e 0000:0e:00.0: eth2: Intel(R) PRO/1000 Network Connection
e1000e 0000:0e:00.0: eth2: MAC: 0, PHY: 4, PBA No: D47316-004
e1000e 0000:0e:00.1: Disabling ASPM L1
e1000e 0000:0e:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:0e:00.1: irq 50 for MSI/MSI-X
usb 1-1: New USB device found, idVendor=413c, idProduct=a001
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 2 ports detected
scsi 2:0:32:0: Enclosure DP BACKPLANE 1.05 PQ: 0 ANSI: 5
scsi 2:2:0:0: Direct-Access DELL PERC 6/i 1.21 PQ: 0 ANSI: 5
scsi 2:0:32:0: Attached scsi generic sg1 type 13
sd 2:2:0:0: [sda] 3511681024 512-byte logical blocks: (1.79 TB/1.63 TiB)
sd 2:2:0:0: Attached scsi generic sg2 type 0
sd 2:2:0:0: [sda] Write Protect is off
sd 2:2:0:0: [sda] Mode Sense: 1f 00 10 08
sd 2:2:0:0: [sda] Write cache: disabled, read cache: disabled, supports DPO and FUA
sda: sda1 sda2 < sda5 >
sd 2:2:0:0: [sda] Attached SCSI disk
usb 1-5: new high-speed USB device number 3 using ehci_hcd
e1000e 0000:0e:00.1: eth3: (PCI Express:2.5GT/s:Width x4) 00:15:17:24:ef:a9
e1000e 0000:0e:00.1: eth3: Intel(R) PRO/1000 Network Connection
e1000e 0000:0e:00.1: eth3: MAC: 0, PHY: 4, PBA No: D47316-004
e1000e 0000:0f:00.0: Disabling ASPM L1
e1000e 0000:0f:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:0f:00.0: irq 51 for MSI/MSI-X
Refined TSC clocksource calibration: 2493.775 MHz.
Switching to clocksource tsc
usb 1-5: New USB device found, idVendor=04b4, idProduct=6560
usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
ses 2:0:32:0: Attached Enclosure device
e1000e 0000:0f:00.0: eth4: (PCI Express:2.5GT/s:Width x4) 00:15:17:24:ef:aa
e1000e 0000:0f:00.0: eth4: Intel(R) PRO/1000 Network Connection
e1000e 0000:0f:00.0: eth4: MAC: 0, PHY: 4, PBA No: D47316-004
e1000e 0000:0f:00.1: Disabling ASPM L1
e1000e 0000:0f:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:0f:00.1: irq 52 for MSI/MSI-X
usb 1-1.1: new full-speed USB device number 4 using ehci_hcd
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 1-1.1: New USB device found, idVendor=413c, idProduct=0000
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: DRAC5
usb 1-1.1: Manufacturer: Dell
usb 1-1.1: SerialNumber: 0000000
usb 1-1.2: new high-speed USB device number 5 using ehci_hcd
e1000e 0000:0f:00.1: eth5: (PCI Express:2.5GT/s:Width x4) 00:15:17:24:ef:ab
e1000e 0000:0f:00.1: eth5: Intel(R) PRO/1000 Network Connection
e1000e 0000:0f:00.1: eth5: MAC: 0, PHY: 4, PBA No: D47316-004
usb 1-1.2: New USB device found, idVendor=413c, idProduct=0001
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2: Product: DRAC5 VIRTUAL MEDIA
usb 1-1.2: Manufacturer: DELL INC.
usb 1-1.2: SerialNumber: 1028 123456
Initializing USB Mass Storage driver...
scsi3 : usb-storage 1-1.2:1.0
scsi4 : usb-storage 1-1.2:1.1
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-5.2: new low-speed USB device number 6 using ehci_hcd
usb 1-5.2: New USB device found, idVendor=046d, idProduct=c517
usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2: Product: USB Receiver
usb 1-5.2: Manufacturer: Logitech
scsi 3:0:0:0: CD-ROM Dell Virtual CDROM 123 PQ: 0 ANSI: 0 CCS
scsi 4:0:0:0: Direct-Access Dell Virtual Floppy 123 PQ: 0 ANSI: 0 CCS
sr1: scsi-1 drive
sr 3:0:0:0: Attached scsi CD-ROM sr1
sr 3:0:0:0: Attached scsi generic sg3 type 5
sd 4:0:0:0: Attached scsi generic sg4 type 0
floppy0: no floppy controllers found
sd 4:0:0:0: [sdb] Attached SCSI removable disk
Adding 33547260k swap on /dev/sda5. Priority:-1 extents:1 across:33547260k
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth5: link is not ready
udevd[401]: starting version 175
microcode: CPU0 sig=0x1067a, pf=0x40, revision=0xa07
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
microcode: CPU1 sig=0x1067a, pf=0x40, revision=0xa07
microcode: CPU2 sig=0x1067a, pf=0x40, revision=0xa07
microcode: CPU3 sig=0x1067a, pf=0x40, revision=0xa07
microcode: CPU4 sig=0x1067a, pf=0x40, revision=0xa07
microcode: CPU5 sig=0x1067a, pf=0x40, revision=0xa07
microcode: CPU6 sig=0x1067a, pf=0x40, revision=0xa07
microcode: CPU7 sig=0x1067a, pf=0x40, revision=0xa07
microcode: Microcode Update Driver: v2.00 , Peter Oruba
lp: driver loaded but no devices found
intel_rng: FWH not detected
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Dell DRAC5 as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1:1.0/input/input1
hid-generic 0003:413C:0000.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell DRAC5] on usb-0000:00:1d.7-1.1/input0
input: Dell DRAC5 as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1:1.1/input/input2
hid-generic 0003:413C:0000.0002: input,hidraw1: USB HID v1.10 Mouse [Dell DRAC5] on usb-0000:00:1d.7-1.1/input1
EDAC MC: Ver: 2.1.0
[drm] Initialized drm 1.1.0 20060810
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.2/1-5.2:1.0/input/input3
logitech 0003:046D:C517.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.7-5.2/input0
logitech 0003:046D:C517.0004: fixing up Logitech keyboard report descriptor
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.2/1-5.2:1.1/input/input4
logitech 0003:046D:C517.0004: input,hiddev0,hidraw3: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.7-5.2/input1
gpio_ich: ACPI BAR is busy, GPI 0 - 15 unavailable
gpio_ich: GPIO from 206 to 255 on gpio_ich
EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0
EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x1028:0x01B2).
[drm] register mmio base: 0xFC2D0000
[drm] register mmio size: 65536
radeon 0000:11:0d.0: VRAM: 128M 0x00000000D8000000 - 0x00000000DFFFFFFF (16M used)
radeon 0000:11:0d.0: GTT: 512M 0x00000000B8000000 - 0x00000000D7FFFFFF
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 16bits DDR
[TTM] Zone kernel: Available graphics memory: 16472738 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 16M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCI GART of 512M enabled (table at 0x0000000036E00000).
radeon 0000:11:0d.0: WB disabled
radeon 0000:11:0d.0: fence driver on ring 0 use gpu addr 0x00000000b8000000 and cpu addr 0xffff880036dd6000
[drm] Loading R100 Microcode
type=1400 audit(1361496204.367:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=632 comm="apparmor_parser"
type=1400 audit(1361496204.367:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=631 comm="apparmor_parser"
type=1400 audit(1361496204.367:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=637 comm="apparmor_parser"
type=1400 audit(1361496204.367:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=632 comm="apparmor_parser"
type=1400 audit(1361496204.367:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=631 comm="apparmor_parser"
type=1400 audit(1361496204.367:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=637 comm="apparmor_parser"
type=1400 audit(1361496204.367:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=632 comm="apparmor_parser"
type=1400 audit(1361496204.367:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=631 comm="apparmor_parser"
type=1400 audit(1361496204.367:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=637 comm="apparmor_parser"
type=1400 audit(1361496204.371:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=633 comm="apparmor_parser"
[drm] radeon: ring at 0x00000000B8001000
[drm] ring test succeeded in 1 usecs
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] fb mappable at 0xD8040000
[drm] vram apper at 0xD8000000
[drm] size 1884160
[drm] fb depth is 8
[drm] pitch is 1792
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 210x65
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.18.0 20080528 for 0000:11:0d.0 on minor 0
bnx2 0000:03:00.0: irq 53 for MSI/MSI-X
bnx2 0000:03:00.0: eth0: using MSI
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
floppy0: no floppy controllers found
bnx2 0000:03:00.0: eth0: NIC Copper Link is Up, 1000 Mbps full duplex
, receive & transmit flow control ON
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: failsafe main process (669) killed by TERM signal
audit_printk_skb: 33 callbacks suppressed
type=1400 audit(1361496214.955:23): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=995 comm="apparmor_parser"
type=1400 audit(1361496214.955:24): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=995 comm="apparmor_parser"
type=1400 audit(1361496214.955:25): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=995 comm="apparmor_parser"
type=1400 audit(1361496214.975:26): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=997 comm="apparmor_parser"
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0
ipmi_si ipmi_si.0: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
ipmi_si ipmi_si.0: IPMI kcs interface initialized
ipmi device interface
megaraid_sas 0000:01:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT misc device (ioctl) driver 3.04.20
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
mpt2sas version 13.100.00.00 loaded
megasas: fasync_helper was not called first
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0
ipmi_si ipmi_si.0: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
ipmi_si ipmi_si.0: IPMI kcs interface initialized
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
type=1400 audit(1361497449.805:27): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=29556 comm="apparmor_parser"
type=1400 audit(1361497449.809:28): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=29556 comm="apparmor_parser"
usbcore: registered new interface driver usblp
ppdev: user-space parallel port driver
type=1400 audit(1361497449.881:29): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=29611 comm="apparmor_parser"
type=1400 audit(1361497449.881:30): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=29611 comm="apparmor_parser"
type=1400 audit(1361497461.497:31): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=32070 comm="apparmor_parser"
type=1400 audit(1361497461.497:32): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=32070 comm="apparmor_parser"
type=1400 audit(1361497461.497:33): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*//sanitized_helper" pid=32070 comm="apparmor_parser"
type=1400 audit(1361497472.445:34): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=32645 comm="apparmor_parser"
type=1400 audit(1361497472.445:35): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=32645 comm="apparmor_parser"
type=1400 audit(1361497472.445:36): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=32645 comm="apparmor_parser"
type=1400 audit(1361497472.445:37): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=32645 comm="apparmor_parser"
type=1400 audit(1361497472.445:38): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=32645 comm="apparmor_parser"
type=1400 audit(1361497472.449:39): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=32645 comm="apparmor_parser"
usb 1-1.2: reset high-speed USB device number 5 using ehci_hcd
type=1400 audit(1361497491.609:40): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=2241 comm="apparmor_parser"
type=1400 audit(1361497491.609:41): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=2241 comm="apparmor_parser"
type=1400 audit(1361497497.869:42): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=2591 comm="apparmor_parser"
type=1400 audit(1361497497.869:43): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=2591 comm="apparmor_parser"
gksudo[10766]: segfault at 4e1 ip 00007f55c9531fb9 sp 00007ffff8394300 error 4 in libgdk-x11-2.0.so.0.2400.13[7f55c94c0000+ad000]
compiz[8639]: segfault at fffffffffe3ba88c ip 00007f00937a5470 sp 00007fff9478fcf8 error 4 in libc-2.15.so[7f0093660000+1b5000]
init: lightdm main process (8101) killed by KILL signal