dmesg - memorycache
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.7.8-202.fc18.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 4.7.2 20121109 (Red Hat 4.7.2-8) (GCC) ) #1 SMP Fri Feb 15 17:33:07 UTC 2013
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfe7ffff] usable
BIOS-e820: [mem 0x00000000cfe80000-0x00000000cfe97fff] ACPI data
BIOS-e820: [mem 0x00000000cfe98000-0x00000000cfebffff] ACPI NVS
BIOS-e820: [mem 0x00000000cfec0000-0x00000000cfefffff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/M5A78L-M LE, BIOS 1402 11/14/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000130000000 aka 4864M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcfe80 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xcfe7ffff]
[mem 0x00000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcfdfffff] page 2M
[mem 0xcfe00000-0xcfe7ffff] page 4k
kernel direct mapping tables up to 0xcfe7ffff @ [mem 0x1fffd000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x11fffffff]
[mem 0x100000000-0x11fffffff] page 2M
kernel direct mapping tables up to 0x11fffffff @ [mem 0xcfe7e000-0xcfe7ffff]
RAMDISK: [mem 0x342ae000-0x3614efff]
ACPI: RSDP 00000000000fb490 00024 (v02 ACPIAM)
ACPI: XSDT 00000000cfe80100 00054 (v01 111412 XSDT1051 20121114 MSFT 00000097)
ACPI: FACP 00000000cfe80290 000F4 (v03 111412 FACP1051 20121114 MSFT 00000097)
ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120913/tbfadt-598)
ACPI: DSDT 00000000cfe80460 0D8D0 (v01 A1895 A1895001 00000001 INTL 20060113)
ACPI: FACS 00000000cfe98000 00040
ACPI: APIC 00000000cfe80390 0008C (v01 111412 APIC1051 20121114 MSFT 00000097)
ACPI: MCFG 00000000cfe80420 0003C (v01 111412 OEMMCFG 20121114 MSFT 00000097)
ACPI: OEMB 00000000cfe98040 00072 (v01 111412 OEMB1051 20121114 MSFT 00000097)
ACPI: HPET 00000000cfe8f460 00038 (v01 111412 OEMHPET 20121114 MSFT 00000097)
ACPI: SSDT 00000000cfe8f4a0 0024C (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
Initmem setup node 0 [mem 0x00000000-0x11fffffff]
NODE_DATA [mem 0x11ffec000-0x11fffffff]
[ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ba00000-ffff88011f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x11fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0xcfe7ffff]
node 0: [mem 0x100000000-0x11fffffff]
On node 0 totalpages: 982543
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3913 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 831168 pages, LIFO batch:31
Normal zone: 2048 pages used for memmap
Normal zone: 129024 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
ACPI: IOAPIC (id[0x16] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 22, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
smpboot: Allowing 8 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
PM: Registered nosave memory: 00000000cfe80000 - 00000000cfe98000
PM: Registered nosave memory: 00000000cfe98000 - 00000000cfec0000
PM: Registered nosave memory: 00000000cfec0000 - 00000000cff00000
PM: Registered nosave memory: 00000000cff00000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
e820: [mem 0xcff00000-0xffdfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s84352 r8192 d22144 u262144
pcpu-alloc: s84352 r8192 d22144 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 964105
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
Memory: 3688648k/4718592k available (6413k kernel code, 788420k absent, 241524k reserved, 6787k data, 1068k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
NR_IRQS:8448 nr_irqs:744 16
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 15728640 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3959.850 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7919.70 BogoMIPS (lpj=3959850)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20120913
ftrace: allocating 23768 entries in 93 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-6300 Six-Core Processor (fam: 15, model: 02, stepping: 00)
Performance Events:
perf: AMD core performance counters detected
AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5
Brought up 6 CPUs
smpboot: Total of 6 processors activated (47518.20 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xcfe98000-0xcfebffff] (163840 bytes)
atomic64 test passed for x86-64 platform with CX8 and with SSE
RTC time: 19:14:12, date: 02/20/13
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
pci 0000:00:01.0: [1043:9602] type 01 class 0x060400
pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
pci 0000:00:11.0: reg 24: [mem 0xfe9ffc00-0xfe9fffff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xfe9fe000-0xfe9fefff]
pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: reg 10: [mem 0xfe9fd000-0xfe9fdfff]
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xfe9ff800-0xfe9ff8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xfe9fc000-0xfe9fcfff]
pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: reg 10: [mem 0xfe9fb000-0xfe9fbfff]
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xfe9ff400-0xfe9ff4ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 10: [mem 0xfe9fa000-0xfe9fafff]
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:05.0: [1002:9616] type 00 class 0x030000
pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
pci 0000:01:05.0: reg 14: [io 0xd000-0xd0ff]
pci 0000:01:05.0: reg 18: [mem 0xfebe0000-0xfebeffff]
pci 0000:01:05.0: reg 24: [mem 0xfea00000-0xfeafffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfebfffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff]
pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:05.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfe80000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0xcff00000-0xdfffffff window]
pnp 00:00: [mem 0xf0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x0083]
pnp 00:02: [io 0x0087]
pnp 00:02: [io 0x0089-0x008b]
pnp 00:02: [io 0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x0378-0x037f]
pnp 00:06: [irq 7]
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:07: [mem 0xfed00000-0xfed003ff]
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:09: [io 0x03f8-0x03ff]
pnp 00:09: [irq 4]
pnp 00:09: [dma 0 disabled]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: [mem 0xfec00000-0xfec00fff]
pnp 00:0a: [mem 0xfee00000-0xfee00fff]
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [io 0x0010-0x001f]
pnp 00:0b: [io 0x0022-0x003f]
pnp 00:0b: [io 0x0062-0x0063]
pnp 00:0b: [io 0x0065-0x006f]
pnp 00:0b: [io 0x0072-0x007f]
pnp 00:0b: [io 0x0080]
pnp 00:0b: [io 0x0084-0x0086]
pnp 00:0b: [io 0x0088]
pnp 00:0b: [io 0x008c-0x008e]
pnp 00:0b: [io 0x0090-0x009f]
pnp 00:0b: [io 0x00a2-0x00bf]
pnp 00:0b: [io 0x00b1]
pnp 00:0b: [io 0x00e0-0x00ef]
pnp 00:0b: [io 0x04d0-0x04d1]
pnp 00:0b: [io 0x040b]
pnp 00:0b: [io 0x04d6]
pnp 00:0b: [io 0x0c00-0x0c01]
pnp 00:0b: [io 0x0c14]
pnp 00:0b: [io 0x0c50-0x0c51]
pnp 00:0b: [io 0x0c52]
pnp 00:0b: [io 0x0c6c]
pnp 00:0b: [io 0x0c6f]
pnp 00:0b: [io 0x0cd0-0x0cd1]
pnp 00:0b: [io 0x0cd2-0x0cd3]
pnp 00:0b: [io 0x0cd4-0x0cd5]
pnp 00:0b: [io 0x0cd6-0x0cd7]
pnp 00:0b: [io 0x0cd8-0x0cdf]
pnp 00:0b: [io 0x0b00-0x0b3f]
pnp 00:0b: [io 0x0800-0x089f]
pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:0b: [io 0x0b00-0x0b0f]
pnp 00:0b: [io 0x0b20-0x0b3f]
pnp 00:0b: [io 0x0900-0x090f]
pnp 00:0b: [io 0x0910-0x091f]
pnp 00:0b: [io 0xfe00-0xfefe]
pnp 00:0b: [io 0x0060-0x005f disabled]
pnp 00:0b: [io 0x0064-0x0063 disabled]
pnp 00:0b: [mem 0xcff00000-0xcfffffff]
pnp 00:0b: [mem 0xffb80000-0xffbfffff]
pnp 00:0b: [mem 0xfec10000-0xfec1001f]
pnp 00:0b: [mem 0xfed40000-0xfed44fff]
system 00:0b: [io 0x04d0-0x04d1] has been reserved
system 00:0b: [io 0x040b] has been reserved
system 00:0b: [io 0x04d6] has been reserved
system 00:0b: [io 0x0c00-0x0c01] has been reserved
system 00:0b: [io 0x0c14] has been reserved
system 00:0b: [io 0x0c50-0x0c51] has been reserved
system 00:0b: [io 0x0c52] has been reserved
system 00:0b: [io 0x0c6c] has been reserved
system 00:0b: [io 0x0c6f] has been reserved
system 00:0b: [io 0x0cd0-0x0cd1] has been reserved
system 00:0b: [io 0x0cd2-0x0cd3] has been reserved
system 00:0b: [io 0x0cd4-0x0cd5] has been reserved
system 00:0b: [io 0x0cd6-0x0cd7] has been reserved
system 00:0b: [io 0x0cd8-0x0cdf] has been reserved
system 00:0b: [io 0x0b00-0x0b3f] has been reserved
system 00:0b: [io 0x0800-0x089f] has been reserved
system 00:0b: [io 0x0b00-0x0b0f] has been reserved
system 00:0b: [io 0x0b20-0x0b3f] has been reserved
system 00:0b: [io 0x0900-0x090f] has been reserved
system 00:0b: [io 0x0910-0x091f] has been reserved
system 00:0b: [io 0xfe00-0xfefe] has been reserved
system 00:0b: [mem 0xcff00000-0xcfffffff] has been reserved
system 00:0b: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:0b: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:0b: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:0c: [io 0x0230-0x023f]
pnp 00:0c: [io 0x0290-0x029f]
pnp 00:0c: [io 0x0300-0x030f]
pnp 00:0c: [io 0x0a30-0x0a3f]
system 00:0c: [io 0x0230-0x023f] has been reserved
system 00:0c: [io 0x0290-0x029f] has been reserved
system 00:0c: [io 0x0300-0x030f] has been reserved
system 00:0c: [io 0x0a30-0x0a3f] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0xe0000000-0xefffffff]
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [mem 0x00000000-0x0009ffff]
pnp 00:0e: [mem 0x000c0000-0x000cffff]
pnp 00:0e: [mem 0x000e0000-0x000fffff]
pnp 00:0e: [mem 0x00100000-0xcfefffff]
pnp 00:0e: [mem 0xfec00000-0xffffffff]
system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0e: [mem 0x00100000-0xcfefffff] could not be reserved
system 00:0e: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfebfffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfebfffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xcff00000-0xdfffffff]
pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:01:05.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 31364k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1361387652.973:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7394
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vesafb: mode is 1400x1050x32, linelength=5632, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011000000, using 5824k, total 5824k
Console: switching to colour frame buffer device 175x65
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
loop: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd00 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd80 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe80 irq 22
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe9ff800
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.7.8-202.fc18.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe9ff400
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.7.8-202.fc18.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe9fe000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.7.8-202.fc18.x86_64 ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe9fd000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.7.8-202.fc18.x86_64 ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe9fc000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.7.8-202.fc18.x86_64 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe9fb000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.7.8-202.fc18.x86_64 ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe9fa000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 3.7.8-202.fc18.x86_64 ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
ata2: SATA link down (SStatus 0 SControl 300)
cpuidle: using governor menu
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
ata4: SATA link down (SStatus 0 SControl 300)
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
tsc: Refined TSC clocksource calibration: 3960.079 MHz
Switching to clocksource tsc
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Initializing XFRM netlink socket
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
ata3.00: ATA-7: SAMSUNG SP2004C, VM100-50, max UDMA7
ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ATA-7: Hitachi HDT725032VLA380, V54OA7BA, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP2004C VM10 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 390721968 512-byte logical blocks: (200 GB/186 GiB)
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
sd 2:0:0:0: [sdb] Attached SCSI disk
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
usb 3-3: new low-speed USB device number 2 using ohci_hcd
MODSIGN: Loaded cert 'Fedora kernel signing key: 40f49b3761b0a6811368d10bc70fe0f4b183831c'
registered taskstats version 1
Magic number: 1:661:243
rtc_cmos 00:03: setting system clock to 2013-02-20 19:14:17 UTC (1361387657)
powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
usb 3-3: New USB device found, idVendor=0458, idProduct=003a
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: Optical Mouse
usb 3-3: Manufacturer: Genius
input: Genius Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input3
hid-generic 0003:0458:003A.0001: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:12.0-3/input0
Freeing unused kernel memory: 1068k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1768k freed
Freeing unused kernel memory: 1404k freed
systemd[1]: systemd 197 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
systemd[1]: Running in initial RAM disk.
systemd[1]: No hostname configured.
systemd[1]: Set hostname to .
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd[1]: Starting Sockets.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Swap.
systemd[1]: Reached target Swap.
systemd[1]: Starting Local File Systems.
systemd[1]: Reached target Local File Systems.
systemd[1]: Started dracut cmdline hook.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting dracut pre-udev hook...
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started dracut pre-udev hook.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Starting System Initialization.
systemd-udevd[206]: starting version 197
systemd[1]: Reached target System Initialization.
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Starting dracut pre-trigger hook...
systemd[1]: Started dracut pre-trigger hook.
systemd[1]: Starting udev Coldplug all Devices...
wmi: Mapper loaded
pata_atiixp 0000:00:14.1: setting latency timer to 64
scsi4 : pata_atiixp
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
scsi5 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[drm] Initialized drm 1.1.0 20060810
r8169 0000:02:00.0: irq 41 for MSI/MSI-X
r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90010f8a000, 30:85:a9:b0:e9:53, XID 0c900800 IRQ 41
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ata6.01: ATAPI: ATAPI DVD A DH16A3L, 8H1B, max UDMA/100
ata6.01: configured for UDMA/100
scsi 5:0:1:0: CD-ROM ATAPI DVD A DH16A3L 8H1B PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/12x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:1:0: Attached scsi CD-ROM sr0
sr 5:0:1:0: Attached scsi generic sg2 type 5
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
checking generic (d0000000 5b0000) vs hw (d0000000 10000000)
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
systemd-udevd[242]: renamed network interface eth0 to p4p1
ACPI: Invalid Power Resource to register!
Console: switching
to colour dummy device 80x25
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Starting Show Plymouth Boot Screen...
[drm] initializing kernel modesetting (RS780 0x1002:0x9616 0x1043:0x8388).
[drm] register mmio base: 0xFEBE0000
[drm] register mmio size: 65536
ATOM BIOS: B27722_RS780C
radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 1895114 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RS780 Microcode
[drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
radeon 0000:01:05.0: WB enabled
radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff8801120a2c00
radeon 0000:01:05.0: setting latency timer to 64
[drm] ring test on 0 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] DVI-D-1
[drm] HPD1
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP3: INTERNAL_KLDSCP_LVTMA
[drm] radeon: power management initialized
systemd[1]: Starting dracut initqueue hook...
[drm] fb mappable at 0xD0142000
[drm] vram apper at 0xD0000000
[drm] size 7299072
[drm] fb depth is 24
[drm] pitch is 6912
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 210x65
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.24.0 20080528 for 0000:01:05.0 on minor 0
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Started Show Plymouth Boot Screen.
systemd[1]: Starting Forward Password Requests to Plymouth Directory Watch.
systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Basic System.
systemd[1]: Reached target Basic System.
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Started dracut initqueue hook.
systemd[1]: Starting dracut pre-pivot and cleanup hook...
systemd-journald[181]: Received SIGTERM
type=1404 audit(1361387665.103:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 94945 rules.
SELinux: 2048 avtab hash slots, 94945 rules.
SELinux: 9 users, 15 roles, 4377 types, 240 bools, 1 sens, 1024 cats
SELinux: 83 classes, 94945 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
SELinux: initialized (dev sdb2, type ext4), uses xattr
type=1403 audit(1361387665.423:3): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 354ms 749us.
systemd[1]: Relabelled /dev and /run in 18ms 567us.
systemd-readahead[390]: Bumped block_nr parameter of 8:16 to 20480. This is a temporary hack and should be removed one day.
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
EXT4-fs (sdb2): re-mounted. Opts: (null)
systemd-udevd[399]: starting version 197
SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
ATK0110 ATK0110:00: Overriding interface detection
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120913/utaddress-251)
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SMRG 2 (20120913/utaddress-251)
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 3 (20120913/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
sp5100_tco: mmio address 0xfec000f0 already in use
ALSA sound/pci/hda/hda_intel.c:2902 Using LPIB position fix
ALSA sound/pci/hda/hda_intel.c:1680 Enable sync_write for stable communication
ALSA sound/pci/hda/patch_realtek.c:1241 SKU: Nid=0x1d sku_cfg=0x4004c601
ALSA sound/pci/hda/patch_realtek.c:1243 SKU: port_connectivity=0x1
ALSA sound/pci/hda/patch_realtek.c:1244 SKU: enable_pcbeep=0x0
ALSA sound/pci/hda/patch_realtek.c:1245 SKU: check_sum=0x00000004
ALSA sound/pci/hda/patch_realtek.c:1246 SKU: customization=0x000000c6
ALSA sound/pci/hda/patch_realtek.c:1247 SKU: external_amp=0x0
ALSA sound/pci/hda/patch_realtek.c:1248 SKU: platform_type=0x0
ALSA sound/pci/hda/patch_realtek.c:1249 SKU: swap=0x0
ALSA sound/pci/hda/patch_realtek.c:1250 SKU: override=0x1
ALSA sound/pci/hda/hda_auto_parser.c:318 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
ALSA sound/pci/hda/hda_auto_parser.c:322 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_auto_parser.c:326 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_auto_parser.c:327 mono: mono_out=0x0
ALSA sound/pci/hda/hda_auto_parser.c:330 dig-out=0x11/0x0
ALSA sound/pci/hda/hda_auto_parser.c:331 inputs:
ALSA sound/pci/hda/hda_auto_parser.c:335 Rear Mic=0x18
ALSA sound/pci/hda/hda_auto_parser.c:335 Front Mic=0x19
ALSA sound/pci/hda/hda_auto_parser.c:335 Line=0x1a
ALSA sound/pci/hda/patch_realtek.c:1304 realtek: No valid SSID, checking pincfg 0x4004c601 for NID 0x1d
ALSA sound/pci/hda/patch_realtek.c:1320 realtek: Enabling init ASM_ID=0xc601 CODEC_ID=10ec0887
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
MCE: In-kernel MCE decoding enabled.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
microcode: CPU0: patch_level=0x0600081c
microcode: CPU1: patch_level=0x0600081c
microcode: CPU2: patch_level=0x0600081c
microcode: CPU3: patch_level=0x0600081c
microcode: CPU4: patch_level=0x0600081c
microcode: CPU5: patch_level=0x0600081c
microcode: Microcode Update Driver: v2.00 , Peter Oruba
kvm: disabled by bios
kvm: disabled by bios
kvm: disabled by bios
kvm: disabled by bios
kvm: disabled by bios
kvm: disabled by bios
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
ppdev: user-space parallel port driver
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
Adding 2047996k swap on /dev/sdb3. Priority:-1 extents:1 across:2047996k
EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev sdb5, type ext4), uses xattr
systemd-journald[406]: Received SIGUSR1
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
iscsi: registered transport (cxgb3i)
Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
iscsi: registered transport (cxgb4i)
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.14 (Sep 30, 2012)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Apr 25, 2012)
iscsi: registered transport (bnx2i)
iscsi: registered transport (be2iscsi)
In beiscsi_module_init, tt=ffffffffa049e000
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
r8169 0000:02:00.0 p4p1: link down
r8169 0000:02:00.0 p4p1: link down
IPv6: ADDRCONF(NETDEV_UP): p4p1: link is not ready
r8169 0000:02:00.0 p4p1: link up
IPv6: ADDRCONF(NETDEV_CHANGE): p4p1: link becomes ready
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts