dmesg - benchmark
Management for Freescale i.MX6
wait mode is enabled for i.MX6
cpaddr = c0880000 suspend_iram_base=c08fc000
PM driver module loaded
IMX usb wakeup probe
the wakeup pdata is 0xbfeaf900
i.MXC CPU frequency driver
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 1752
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
mxc_mipi_dsi mxc_mipi_dsi: i.MX MIPI DSI driver probed
MIPI DSI driver module loaded
mxc_sdc_fb mxc_sdc_fb.0: register mxc display driver hdmi
mxc_hdmi mxc_hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1
fbcvt: 1920x1080@60: CVT Name - 2.073M9
imx-ipuv3 imx-ipuv3.0: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
Console: switching to colour frame buffer device 240x67
mxc_sdc_fb mxc_sdc_fb.1: register mxc display driver ldb
_regulator_get: get() with no identifier
mxc_sdc_fb mxc_sdc_fb.2: register mxc display driver lcd
mxc_sdc_fb mxc_sdc_fb.2: ipu0-di0 already in use
mxc_sdc_fb: probe of mxc_sdc_fb.2 failed with error -16
mxc_sdc_fb mxc_sdc_fb.3: register mxc display driver ldb
imx-sdma imx-sdma: loaded firmware 1.1
imx-sdma imx-sdma: initialized
fbcvt: 1920x1080@60: CVT Name - 2.073M9
imx-uart.2: ttymxc2 at MMIO 0x21ec000 (irq = 60) is a IMX
imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX
console [ttymxc0] enabled, bootconsole disabled
loop: module loaded
Can't recover from RESET HBA!
No sata disk.
m25p80 spi0.0: unrecognized JEDEC id ffffff
vcan: Virtual CAN interface driver
CAN device driver interface
flexcan netdevice driver
FEC Ethernet Driver
fec_enet_mii_bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
fsl-ehci fsl-ehci.0: irq 75, io base 0x02184000
fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
add wake up source irq 72
fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
fsl-ehci fsl-ehci.1: irq 72, io base 0x02184200
fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ARC USBOTG Device Controller driver (1 August 2005)
mousedev: PS/2 mouse device common for all mice
input: gpio-keys as /devices/platform/gpio-keys/input/input0
input: max11801_ts as /devices/platform/imx-i2c.1/i2c-1/1-0048/input/input1
egalax_ts 1-0004: egalax_ts: failed to read firmware version
egalax_ts: probe of 1-0004 failed with error -5
egalax_ts 2-0004: egalax_ts: failed to read firmware version
egalax_ts: probe of 2-0004 failed with error -5
elan - Read Hello Packet Failed
elan-touch: probe of 2-0010 failed with error -22
i2c-core: driver [isl29023] using legacy suspend method
i2c-core: driver [isl29023] using legacy resume method
snvs_rtc snvs_rtc.0: rtc core: registered snvs_rtc as rtc0
i2c /dev entries driver
Linux video capture interface: v2.00
mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video16
mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video17
mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video18
mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video19
mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video20
mag3110 2-000e: check mag3110 chip ID
input: mag3110 as /devices/virtual/input/input2
mag3110 2-000e: mag3110 is probed
i2c-core: driver [mag3110] using legacy suspend method
i2c-core: driver [mag3110] using legacy resume method
input: mma845x as /devices/virtual/input/input3
imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=1)
Bluetooth: Virtual HCI driver ver 1.3
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCIATH3K protocol initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
mmc0: SDHCI controller on platform [sdhci-esdhc-imx.3] using DMA
mmc1: SDHCI controller on platform [sdhci-esdhc-imx.1] using DMA
mmc2: SDHCI controller on platform [sdhci-esdhc-imx.2] using DMA
mxc_vdoa mxc_vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
VPU initialized
mxc_asrc registered
Thermal calibration data is 0x58c4d07d
Anatop Thermal registered as thermal_zone0
anatop_thermal_probe: default cooling device is cpufreq!
Registered led device: chg_now_led
mmc0: new high speed DDR MMC card at address 0001
mmcblk0: mmc0:0001 SEM08G 7.39 GiB
mmcblk0boot0: mmc0:0001 SEM08G partition 1 2.00 MiB
mmcblk0boot1: mmc0:0001 SEM08G partition 2 2.00 MiB
mmcblk0: p1
mmcblk0boot1: unknown partition table
mmcblk0boot0: unknown partition table
caam caam.0: device ID = 0x0a16010000000000
caam caam.0: job rings = 2, qi = 0
alg: No test for authenc(hmac(md5),cbc(aes)) (authenc-hmac-md5-cbc-aes-caam)
caam caam.0: authenc-hmac-md5-cbc-aes-caam
alg: No test for authenc(hmac(sha1),cbc(aes)) (authenc-hmac-sha1-cbc-aes-caam)
caam caam.0: authenc-hmac-sha1-cbc-aes-caam
alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-caam)
caam caam.0: authenc-hmac-sha224-cbc-aes-caam
alg: No test for authenc(hmac(sha256),cbc(aes)) (authenc-hmac-sha256-cbc-aes-caam)
caam caam.0: authenc-hmac-sha256-cbc-aes-caam
alg: No test for authenc(hmac(md5),cbc(des3_ede)) (authenc-hmac-md5-cbc-des3_ede-caam)
caam caam.0: authenc-hmac-md5-cbc-des3_ede-caam
alg: No test for authenc(hmac(sha1),cbc(des3_ede)) (authenc-hmac-sha1-cbc-des3_ede-caam)
caam caam.0: authenc-hmac-sha1-cbc-des3_ede-caam
alg: No test for authenc(hmac(sha224),cbc(des3_ede)) (authenc-hmac-sha224-cbc-des3_ede-caam)
caam caam.0: authenc-hmac-sha224-cbc-des3_ede-caam
alg: No test for authenc(hmac(sha256),cbc(des3_ede)) (authenc-hmac-sha256-cbc-des3_ede-caam)
caam caam.0: authenc-hmac-sha256-cbc-des3_ede-caam
alg: No test for authenc(hmac(md5),cbc(des)) (authenc-hmac-md5-cbc-des-caam)
caam caam.0: authenc-hmac-md5-cbc-des-caam
alg: No test for authenc(hmac(sha1),cbc(des)) (authenc-hmac-sha1-cbc-des-caam)
caam caam.0: authenc-hmac-sha1-cbc-des-caam
alg: No test for authenc(hmac(sha224),cbc(des)) (authenc-hmac-sha224-cbc-des-caam)
caam caam.0: authenc-hmac-sha224-cbc-des-caam
alg: No test for authenc(hmac(sha256),cbc(des)) (authenc-hmac-sha256-cbc-des-caam)
caam caam.0: authenc-hmac-sha256-cbc-des-caam
caam caam.0: cbc-aes-caam
caam caam.0: cbc-3des-caam
caam caam.0: cbc-des-caam
platform caam_jr.0: registering rng-caam
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver snd-usb-audio
mxc_hdmi_soc mxc_hdmi_soc.0: MXC HDMI Audio
Cirrus Logic CS42888 ALSA SoC Codec Driver
i2c-core: driver [cs42888] using legacy suspend method
i2c-core: driver [cs42888] using legacy resume method
wm8962 0-001a: customer id 0 revision D
input: WM8962 Beep Generator as /devices/platform/imx-i2c.0/i2c-0/0-001a/input/input4
asoc: wm8962 imx-ssi.1 mapping ok
imx_3stack asoc driver
asoc: mxc-hdmi-soc imx-hdmi-soc-dai.0 mapping ok
ALSA device list:
#0: wm8962-audio
#1: imx-hdmi-soc
NET: Registered protocol family 26
TCP cubic registered
NET: Registered protocol family 17
can: controller area network core (rev 20090105 abi 8)
NET: Registered protocol family 29
can: raw protocol (rev 20090105)
can: broadcast manager protocol (rev 20090105 t)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
lib80211_crypt: registered algorithm 'WEP'
lib80211_crypt: registered algorithm 'CCMP'
lib80211_crypt: registered algorithm 'TKIP'
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
Bus freq driver module loaded
Bus freq driver Enabled
mxc_dvfs_core_probe
DVFS driver module loaded
regulator_init_complete: PFUZE100_VGEN6: incomplete constraints, leaving on
regulator_init_complete: PFUZE100_VGEN3: incomplete constraints, leaving on
regulator_init_complete: PFUZE100_VGEN2: incomplete constraints, leaving on
regulator_init_complete: PFUZE100_VGEN1: incomplete constraints, leaving on
regulator_init_complete: vddpu: incomplete constraints, leaving on
snvs_rtc snvs_rtc.0: setting system clock to 1970-01-01 00:00:01 UTC (1)
EXT3-fs: barriers not enabled
ehci_fsl_bus_suspend begins, DR
ehci_fsl_bus_suspend ends, DR
ehci_fsl_bus_suspend begins, Host 1
ehci_fsl_bus_suspend ends, Host 1
kjournald starting. Commit interval 5 seconds
EXT3-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended
EXT3-fs (mmcblk0p1): using internal journal
EXT3-fs (mmcblk0p1): recovery complete
EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) on device 179:1.
Freeing init memory: 200K
ov5640_read_reg:write reg error:reg=300a
ov5640_probe:cannot find camera
ov5642_read_reg:write reg error:reg=300a
ov5642_probe:cannot find camera
init: plymouth main process (1398) killed by SEGV signal
init: plymouth-splash main process (4905) terminated with status 2
eth7: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:01, irq=-1)
init: failsafe main process (5074) killed by TERM signal
init: apport pre-start process (5261) terminated with status 1
init: apport post-stop process (5294) terminated with status 1
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized vivante 1.0.0 20120216 on minor 0
init: tty1 main process (5475) killed by TERM signal
PHY: 1:01 - Link is Up - 1000/Full
ehci_fsl_bus_resume begins, DR
ehci_fsl_bus_resume ends, DR
ehci_fsl_bus_resume begins, Host 1
ehci_fsl_bus_resume ends, Host 1
warning: process `colord' used the deprecated sysctl system call with 8.1.2.
ehci_fsl_bus_suspend begins, DR
ehci_fsl_bus_suspend begins, Host 1
ehci_fsl_bus_suspend ends, DR
ehci_fsl_bus_suspend ends, Host 1
[sdhci_pre_dma_transfer] invalid cookie: data->host_cookie 9073 host->next_data.cookie 9074
mxc_hdmi mxc_hdmi: same edid
ehci_fsl_bus_resume begins, DR
ehci_fsl_bus_resume ends, DR
usb 1-1: new low speed USB device number 2 using fsl-ehci
usb 1-1: device v0a81 p0205 is not supported
input: CHESEN PS2 to USB Converter as /devices/platform/fsl-ehci.0/usb1/1-1/1-1:1.0/input/input5
generic-usb 0003:0A81:0205.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-fsl-ehci.0-1/input0
input: CHESEN PS2 to USB Converter as /devices/platform/fsl-ehci.0/usb1/1-1/1-1:1.1/input/input6
generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-fsl-ehci.0-1/input1
ehci_fsl_bus_resume begins, Host 1
ehci_fsl_bus_resume ends, Host 1
mxc_hdmi mxc_hdmi: same edid
ehci_fsl_bus_suspend begins, Host 1
ehci_fsl_bus_suspend ends, Host 1
mxc_hdmi mxc_hdmi: same edid
usb 1-1: USB disconnect, device number 2
ehci_fsl_bus_suspend begins, DR
ehci_fsl_bus_suspend ends, DR
mxc_hdmi mxc_hdmi: same edid
mxc_hdmi mxc_hdmi: same edid
ehci_fsl_bus_resume begins, DR
ehci_fsl_bus_resume ends, DR
usb 1-1: new low speed USB device number 3 using fsl-ehci
usb 1-1: device v0a81 p0205 is not supported
input: CHESEN PS2 to USB Converter as /devices/platform/fsl-ehci.0/usb1/1-1/1-1:1.0/input/input7
generic-usb 0003:0A81:0205.0003: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-fsl-ehci.0-1/input0
input: CHESEN PS2 to USB Converter as /devices/platform/fsl-ehci.0/usb1/1-1/1-1:1.1/input/input8
generic-usb 0003:0A81:0205.0004: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-fsl-ehci.0-1/input1
ehci_fsl_bus_resume begins, Host 1
ehci_fsl_bus_resume ends, Host 1
ehci_fsl_bus_suspend begins, Host 1
ehci_fsl_bus_suspend ends, Host 1
usb 1-1: USB disconnect, device number 3
ehci_fsl_bus_suspend begins, DR
ehci_fsl_bus_suspend ends, DR
mxc_hdmi mxc_hdmi: same edid
ehci_fsl_bus_resume begins, DR
ehci_fsl_bus_resume ends, DR
usb 1-1: new low speed USB device number 4 using fsl-ehci
usb 1-1: device v0a81 p0205 is not supported
input: CHESEN PS2 to USB Converter as /devices/platform/fsl-ehci.0/usb1/1-1/1-1:1.0/input/input9
generic-usb 0003:0A81:0205.0005: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-fsl-ehci.0-1/input0
input: CHESEN PS2 to USB Converter as /devices/platform/fsl-ehci.0/usb1/1-1/1-1:1.1/input/input10
generic-usb 0003:0A81:0205.0006: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-fsl-ehci.0-1/input1
ehci_fsl_bus_resume begins, Host 1
ehci_fsl_bus_resume ends, Host 1
ehci_fsl_bus_suspend begins, Host 1
ehci_fsl_bus_suspend ends, Host 1
usb 1-1: USB disconnect, device number 4
ehci_fsl_bus_suspend begins, DR
ehci_fsl_bus_suspend ends, DR
mxc_hdmi mxc_hdmi: same edid
mxc_hdmi mxc_hdmi: same edid
mxc_hdmi mxc_hdmi: same edid
mxc_hdmi mxc_hdmi: same edid
mxc_hdmi mxc_hdmi: same edid
ehci_fsl_bus_resume begins, DR
ehci_fsl_bus_resume ends, DR
usb 1-1: new low speed USB device number 5 using fsl-ehci
usb 1-1: device v0a81 p0205 is not supported
input: CHESEN PS2 to USB Converter as /devices/platform/fsl-ehci.0/usb1/1-1/1-1:1.0/input/input11
generic-usb 0003:0A81:0205.0007: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-fsl-ehci.0-1/input0
input: CHESEN PS2 to USB Converter as /devices/platform/fsl-ehci.0/usb1/1-1/1-1:1.1/input/input12
generic-usb 0003:0A81:0205.0008: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-fsl-ehci.0-1/input1
ehci_fsl_bus_resume begins, Host 1
ehci_fsl_bus_resume ends, Host 1
ehci_fsl_bus_suspend begins, Host 1
ehci_fsl_bus_suspend ends, Host 1
usb 1-1: USB disconnect, device number 5
ehci_fsl_bus_suspend begins, DR
ehci_fsl_bus_suspend ends, DR
mxc_hdmi mxc_hdmi: same edid
mxc_hdmi mxc_hdmi: same edid
ehci_fsl_bus_resume begins, DR
ehci_fsl_bus_resume ends, DR
usb 1-1: new low speed USB device number 6 using fsl-ehci
usb 1-1: device v0a81 p0205 is not supported
input: CHESEN PS2 to USB Converter as /devices/platform/fsl-ehci.0/usb1/1-1/1-1:1.0/input/input13
generic-usb 0003:0A81:0205.0009: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-fsl-ehci.0-1/input0
input: CHESEN PS2 to USB Converter as /devices/platform/fsl-ehci.0/usb1/1-1/1-1:1.1/input/input14
generic-usb 0003:0A81:0205.000A: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-fsl-ehci.0-1/input1
ehci_fsl_bus_resume begins, Host 1
ehci_fsl_bus_resume ends, Host 1
ehci_fsl_bus_suspend begins, Host 1
ehci_fsl_bus_suspend ends, Host 1
usb 1-1: USB disconnect, device number 6
ehci_fsl_bus_suspend begins, DR
ehci_fsl_bus_suspend ends, DR
mxc_hdmi mxc_hdmi: same edid
mxc_hdmi mxc_hdmi: same edid
mxc_hdmi mxc_hdmi: same edid
mxc_hdmi mxc_hdmi: same edid
mxc_hdmi mxc_hdmi: same edid
mxc_hdmi mxc_hdmi: same edid
mxc_hdmi mxc_hdmi: same edid
mxc_hdmi mxc_hdmi: same edid
mxc_hdmi mxc_hdmi: same edid
[sdhci_pre_dma_transfer] invalid cookie: data->host_cookie 3570222 host->next_data.cookie 3570223
mxc_hdmi mxc_hdmi: same edid
mxc_hdmi mxc_hdmi: same edid
mxc_hdmi mxc_hdmi: same edid