dmesg - TravelMate2410
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-generic (buildd@roseapple) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:32:08 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
Disabled fast string operations
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000002f6dffff] usable
BIOS-e820: [mem 0x000000002f6e0000-0x000000002f6e9fff] ACPI data
BIOS-e820: [mem 0x000000002f6ea000-0x000000002f6fffff] ACPI NVS
BIOS-e820: [mem 0x000000002f700000-0x000000002fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000f0005fff] reserved
BIOS-e820: [mem 0x00000000f0008000-0x00000000f000bfff] reserved
BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
DMI present.
DMI: Acer TravelMate 2410/Morar \x09 , BIOS V1.10 02/24/2006
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x2f6e0 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E3FFF uncachable
E4000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FE0000000 write-back
1 base 020000000 mask FF0000000 write-back
2 base 02F700000 mask FFFF00000 uncachable
3 base 02F800000 mask FFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
PAT not supported by CPU.
original variable MTRRs
reg 0, base: 0GB, range: 512MB, type WB
reg 1, base: 512MB, range: 256MB, type WB
reg 2, base: 759MB, range: 1MB, type UC
reg 3, base: 760MB, range: 8MB, type UC
total RAM covered: 759M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 512MB, type WB
reg 1, base: 512MB, range: 256MB, type WB
reg 2, base: 759MB, range: 1MB, type UC
reg 3, base: 760MB, range: 8MB, type UC
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x2f6dffff]
[mem 0x00000000-0x001fffff] page 4k
[mem 0x00200000-0x2f5fffff] page 2M
[mem 0x2f600000-0x2f6dffff] page 4k
kernel direct mapping tables up to 0x2f6dffff @ [mem 0x01ffa000-0x01ffffff]
RAMDISK: [mem 0x2d1c0000-0x2e64bfff]
ACPI: RSDP 000f7a10 00014 (v00 PTLTD )
ACPI: RSDT 2f6e5e2d 0003C (v01 PTLTD RSDT 06040000 LTP 00000000)
ACPI: FACP 2f6e9e78 00084 (v02 INTEL ALVISO 06040000 LOHR 0000005F)
ACPI: DSDT 2f6e6246 03C32 (v01 INTEL ALVISO 06040000 MSFT 0100000E)
ACPI: FACS 2f6fafc0 00040
ACPI: APIC 2f6e9efc 00068 (v01 INTEL ALVISO 06040000 LOHR 0000005F)
ACPI: BOOT 2f6e9fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: MCFG 2f6e9f9c 0003C (v01 INTEL ALVISO 06040000 LOHR 0000005F)
ACPI: SSDT 2f6e6064 001DE (v01 PmRef Cpu0Cst 00003001 INTL 20030224)
ACPI: SSDT 2f6e5e69 001FB (v01 PmRef CpuPm 00003000 INTL 20030224)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
758MB LOWMEM available.
mapped low ram: 0 - 2f6e0000
low ram: 0 - 2f6e0000
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
Normal [mem 0x01000000-0x2f6dffff]
HighMem empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0x2f6dffff]
On node 0 totalpages: 194159
free_area_init_node: node 0, pgdat c18a0840, node_mem_map ef0ef200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1486 pages used for memmap
Normal zone: 188690 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
e820: [mem 0x30000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @ef0cd000 s34176 r0 d23168 u57344
pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 192641
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
allocated 1554048 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00000000:00000000)
Memory: 736448k/777088k available (5956k kernel code, 40188k reserved, 2928k data, 756k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xefee0000 - 0xffbfe000 ( 253 MB)
lowmem : 0xc0000000 - 0xef6e0000 ( 758 MB)
.init : 0xc18ae000 - 0xc196b000 ( 756 kB)
.data : 0xc15d1358 - 0xc18ad6c0 (2928 kB)
.text : 0xc1000000 - 0xc15d1358 (5956 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=ee808000 soft=ee80a000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 1596.279 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.55 BogoMIPS (lpj=6385116)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Disabled fast string operations
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM1)
SMP alternatives: switching to UP code
ACPI: Core revision 20120320
ftrace: allocating 24585 entries in 49 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Celeron(R) M processor 1.60GHz stepping 08
Performance Events: p6 PMU driver.
... version: 0
... bit width: 32
... generic registers: 2
... value mask: 00000000ffffffff
... max period: 000000007fffffff
... fixed-purpose events: 0
... event mask: 0000000000000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Brought up 1 CPUs
Total of 1 processors activated (3192.55 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x2f6ea000-0x2f6fffff] (90112 bytes)
dummy:
RTC time: 8:53:35, date: 02/12/13
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE storm detected, transactions will use polling mode
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: >host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
pci_root PNP0A08:00: >host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
pci_root PNP0A08:00: >host bridge window [mem 0x30000000-0xfebfffff] (ignored)
PCI: root bus 00: using default resources
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: >root bus resource [mem 0x00000000-0xffffffff]
pci 0000:00:00.0: >[8086:2590] type 00 class 0x060000
pci 0000:00:02.0: >[8086:2592] type 00 class 0x030000
pci 0000:00:02.0: >reg 10: [mem 0xb0080000-0xb00fffff]
pci 0000:00:02.0: >reg 14: [io 0x1800-0x1807]
pci 0000:00:02.0: >reg 18: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:02.0: >reg 1c: [mem 0xb0000000-0xb003ffff]
pci 0000:00:02.1: >[8086:2792] type 00 class 0x038000
pci 0000:00:02.1: >reg 10: [mem 0x00000000-0x0007ffff]
pci 0000:00:1d.0: >[8086:2658] type 00 class 0x0c0300
pci 0000:00:1d.0: >reg 20: [io 0x1820-0x183f]
pci 0000:00:1d.1: >[8086:2659] type 00 class 0x0c0300
pci 0000:00:1d.1: >reg 20: [io 0x1840-0x185f]
pci 0000:00:1d.2: >[8086:265a] type 00 class 0x0c0300
pci 0000:00:1d.2: >reg 20: [io 0x1860-0x187f]
pci 0000:00:1d.3: >[8086:265b] type 00 class 0x0c0300
pci 0000:00:1d.3: >reg 20: [io 0x1880-0x189f]
pci 0000:00:1d.7: >[8086:265c] type 00 class 0x0c0320
pci 0000:00:1d.7: >reg 10: [mem 0xb0040000-0xb00403ff]
pci 0000:00:1d.7: >PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: >[8086:2448] type 01 class 0x060401
pci 0000:00:1e.2: >[8086:266e] type 00 class 0x040100
pci 0000:00:1e.2: >reg 10: [io 0x1c00-0x1cff]
pci 0000:00:1e.2: >reg 14: [io 0x18c0-0x18ff]
pci 0000:00:1e.2: >reg 18: [mem 0xb0040800-0xb00409ff]
pci 0000:00:1e.2: >reg 1c: [mem 0xb0040400-0xb00404ff]
pci 0000:00:1e.2: >PME# supported from D0 D3hot D3cold
pci 0000:00:1e.3: >[8086:266d] type 00 class 0x070300
pci 0000:00:1e.3: >reg 10: [io 0x2400-0x24ff]
pci 0000:00:1e.3: >reg 14: [io 0x2000-0x207f]
pci 0000:00:1e.3: >PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: >[8086:2641] type 00 class 0x060100
pci 0000:00:1f.0: >Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: >quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: >quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: >LPC Generic IO decode 1 PIO at 0680-06ff
pci 0000:00:1f.0: >LPC Generic IO decode 2 PIO at 1200-120f
pci 0000:00:1f.1: >[8086:266f] type 00 class 0x01018a
pci 0000:00:1f.1: >reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.1: >reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.1: >reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.1: >reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: >reg 20: [io 0x1810-0x181f]
pci 0000:00:1f.3: >[8086:266a] type 00 class 0x0c0500
pci 0000:00:1f.3: >reg 20: [io 0x20a0-0x20bf]
pci 0000:06:05.0: >[168c:001a] type 00 class 0x020000
pci 0000:06:05.0: >reg 10: [mem 0xb0100000-0xb010ffff]
pci 0000:06:07.0: >[10ec:8139] type 00 class 0x020000
pci 0000:06:07.0: >reg 10: [io 0x3000-0x30ff]
pci 0000:06:07.0: >reg 14: [mem 0xb0110000-0xb01100ff]
pci 0000:06:07.0: >supports D1 D2
pci 0000:06:07.0: >PME# supported from D1 D2 D3hot D3cold
pci 0000:06:09.0: >[1524:1410] type 02 class 0x060700
pci 0000:06:09.0: >reg 10: [mem 0x00000000-0x00000fff]
pci 0000:06:09.0: >supports D1 D2
pci 0000:06:09.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1e.0: >PCI bridge to [bus 06-06] (subtractive decode)
pci 0000:00:1e.0: > bridge window [io 0x3000-0x3fff]
pci 0000:00:1e.0: > bridge window [mem 0xb0100000-0xb01fffff]
pci 0000:00:1e.0: > bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
pci_bus 0000:07: >[bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-06]
pci_bus 0000:00: >on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
pci0000:00: >Requesting ACPI _OSC control (0x1d)
pci0000:00: >ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0x2f6e0000-0x2fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-ff]
pnp 00:00: >[io 0x0000-0x0cf7 window]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000c0000-0x000c3fff window]
pnp 00:00: >[mem 0x000c4000-0x000c7fff window]
pnp 00:00: >[mem 0x000c8000-0x000cbfff window]
pnp 00:00: >[mem 0x000cc000-0x000cffff window]
pnp 00:00: >[mem 0x000d0000-0x000d3fff window]
pnp 00:00: >[mem 0x000d4000-0x000d7fff window]
pnp 00:00: >[mem 0x000d8000-0x000dbfff window]
pnp 00:00: >[mem 0x000dc000-0x000dffff window]
pnp 00:00: >[mem 0x000e0000-0x000e3fff window]
pnp 00:00: >[mem 0x000e4000-0x000e7fff window]
pnp 00:00: >[mem 0x000e8000-0x000ebfff window]
pnp 00:00: >[mem 0x000ec000-0x000effff window]
pnp 00:00: >[mem 0x000f0000-0x000fffff window]
pnp 00:00: >[mem 0x30000000-0xfebfffff window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: >[io 0x0000-0x001f]
pnp 00:01: >[io 0x0081-0x0091]
pnp 00:01: >[io 0x0093-0x009f]
pnp 00:01: >[io 0x00c0-0x00df]
pnp 00:01: >[dma 4]
pnp 00:01: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: >[mem 0xff800000-0xffffffff]
pnp 00:02: >Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: >[io 0x00f0]
pnp 00:03: >[irq 13]
pnp 00:03: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: >[io 0x002e-0x002f]
pnp 00:04: >[io 0x0061]
pnp 00:04: >[io 0x0063]
pnp 00:04: >[io 0x0065]
pnp 00:04: >[io 0x0067]
pnp 00:04: >[io 0x0080]
pnp 00:04: >[io 0x0092]
pnp 00:04: >[io 0x00b2-0x00b3]
pnp 00:04: >[io 0x0800-0x080f]
pnp 00:04: >[io 0x1000-0x107f]
pnp 00:04: >[io 0x1180-0x11bf]
pnp 00:04: >[io 0x1200]
pnp 00:04: >[io 0x1204]
pnp 00:04: >[mem 0xe0000000-0xefffffff]
pnp 00:04: >[mem 0xf0000000-0xf0003fff]
pnp 00:04: >[mem 0xf0004000-0xf0004fff]
pnp 00:04: >[mem 0xf0005000-0xf0005fff]
pnp 00:04: >[mem 0xf0008000-0xf000bfff]
pnp 00:04: >[mem 0xfec18000-0xfec180ff]
pnp 00:04: >[mem 0xfed20000-0xfed8ffff]
system 00:04: >[io 0x0800-0x080f] has been reserved
system 00:04: >[io 0x1000-0x107f] has been reserved
system 00:04: >[io 0x1180-0x11bf] has been reserved
system 00:04: >[io 0x1200] has been reserved
system 00:04: >[io 0x1204] has been reserved
system 00:04: >[mem 0xe0000000-0xefffffff] has been reserved
system 00:04: >[mem 0xf0000000-0xf0003fff] has been reserved
system 00:04: >[mem 0xf0004000-0xf0004fff] has been reserved
system 00:04: >[mem 0xf0005000-0xf0005fff] has been reserved
system 00:04: >[mem 0xf0008000-0xf000bfff] has been reserved
system 00:04: >[mem 0xfec18000-0xfec180ff] has been reserved
system 00:04: >[mem 0xfed20000-0xfed8ffff] has been reserved
system 00:04: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: >[io 0x0070-0x0077]
pnp 00:05: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: >[io 0x0060]
pnp 00:06: >[io 0x0064]
pnp 00:06: >[irq 1]
pnp 00:06: >Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: >[irq 12]
pnp 00:07: >Plug and Play ACPI device, IDs SYN0302 SYN0300 SYN0002 PNP0f13 (active)
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:06:09.0: >res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:00:1e.0: >bridge window [mem 0x04000000-0x03ffffff pref] to [bus 06-06] add_size 4000000
pci 0000:00:1e.0: >res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:00:1e.0: >BAR 15: assigned [mem 0x30000000-0x33ffffff pref]
pci 0000:00:02.1: >BAR 0: assigned [mem 0x34000000-0x3407ffff]
pci 0000:06:09.0: >res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:06:09.0: >res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
pci 0000:06:09.0: >res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:06:09.0: >res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:06:09.0: >BAR 0: assigned [mem 0x38000000-0x38000fff]
pci 0000:06:09.0: >BAR 15: assigned [mem 0x30000000-0x33ffffff pref]
pci 0000:06:09.0: >BAR 16: assigned [mem 0x3c000000-0x3fffffff]
pci 0000:06:09.0: >BAR 13: assigned [io 0x3400-0x34ff]
pci 0000:06:09.0: >BAR 14: assigned [io 0x3800-0x38ff]
pci 0000:06:09.0: >CardBus bridge to [bus 07-0a]
pci 0000:06:09.0: > bridge window [io 0x3400-0x34ff]
pci 0000:06:09.0: > bridge window [io 0x3800-0x38ff]
pci 0000:06:09.0: > bridge window [mem 0x30000000-0x33ffffff pref]
pci 0000:06:09.0: > bridge window [mem 0x3c000000-0x3fffffff]
pci 0000:00:1e.0: >PCI bridge to [bus 06-06]
pci 0000:00:1e.0: > bridge window [io 0x3000-0x3fff]
pci 0000:00:1e.0: > bridge window [mem 0xb0100000-0xb01fffff]
pci 0000:00:1e.0: > bridge window [mem 0x30000000-0x33ffffff pref]
pci 0000:00:1e.0: >setting latency timer to 64
pci_bus 0000:00: >resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: >resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:06: >resource 0 [io 0x3000-0x3fff]
pci_bus 0000:06: >resource 1 [mem 0xb0100000-0xb01fffff]
pci_bus 0000:06: >resource 2 [mem 0x30000000-0x33ffffff pref]
pci_bus 0000:06: >resource 4 [io 0x0000-0xffff]
pci_bus 0000:06: >resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:07: >resource 0 [io 0x3400-0x34ff]
pci_bus 0000:07: >resource 1 [io 0x3800-0x38ff]
pci_bus 0000:07: >resource 2 [mem 0x30000000-0x33ffffff pref]
pci_bus 0000:07: >resource 3 [mem 0x3c000000-0x3fffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: >Boot video device
PCI: CLS mismatch (32 != 64), using 64 bytes
Simple Boot Flag at 0x37 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1360659214.256:1): initialized
Trying to unpack rootfs image as initramfs...
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 1438
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 13
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: >registered as thermal_zone0
ACPI: Thermal Zone [TZS0] (32 C)
thermal LNXTHERM:01: >registered as thermal_zone1
ACPI: Thermal Zone [TZS1] (19 C)
ACPI: Battery Slot [BAT0] (battery absent)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: >Intel 915GM Chipset
agpgart-intel 0000:00:00.0: >detected gtt size: 262144K total, 262144K mappable
agpgart-intel 0000:00:00.0: >detected 8192K stolen memory
agpgart-intel 0000:00:00.0: >AGP aperture is 256M @ 0xc0000000
brd: module loaded
isapnp: Scanning for PnP cards...
loop: module loaded
ata_piix 0000:00:1f.1: >version 2.13
ata_piix 0000:00:1f.1: >setting latency timer to 64
scsi0 : ata_piix
ACPI: Battery Slot [BAT0] (battery absent)
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: >setting latency timer to 64
ehci_hcd 0000:00:1d.7: >EHCI Host Controller
ehci_hcd 0000:00:1d.7: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: >debug port 1
ehci_hcd 0000:00:1d.7: >cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: >irq 23, io mem 0xb0040000
ehci_hcd 0000:00:1d.7: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb1: >SerialNumber: 0000:00:1d.7
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: >setting latency timer to 64
uhci_hcd 0000:00:1d.0: >UHCI Host Controller
uhci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: >irq 23, io base 0x00001820
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: UHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb2: >SerialNumber: 0000:00:1d.0
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >2 ports detected
uhci_hcd 0000:00:1d.1: >setting latency timer to 64
uhci_hcd 0000:00:1d.1: >UHCI Host Controller
uhci_hcd 0000:00:1d.1: >new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: >irq 17, io base 0x00001840
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: UHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb3: >SerialNumber: 0000:00:1d.1
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >2 ports detected
uhci_hcd 0000:00:1d.2: >setting latency timer to 64
uhci_hcd 0000:00:1d.2: >UHCI Host Controller
uhci_hcd 0000:00:1d.2: >new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: >irq 18, io base 0x00001860
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: UHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb4: >SerialNumber: 0000:00:1d.2
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >2 ports detected
uhci_hcd 0000:00:1d.3: >setting latency timer to 64
uhci_hcd 0000:00:1d.3: >UHCI Host Controller
uhci_hcd 0000:00:1d.3: >new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: >irq 19, io base 0x00001880
usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: >Product: UHCI Host Controller
usb usb5: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb5: >SerialNumber: 0000:00:1d.3
hub 5-0:1.0: >USB hub found
hub 5-0:1.0: >2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: >RTC can wake from S4
rtc_cmos 00:05: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
EISA: Detected 0 cards.
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
ata2: port disabled--ignoring
ata1.00: ATA-7: HTS421240H9AT00, HACOA70S, max UDMA/100
ata1.00: 78140160 sectors, multi 16: LBA48
ata1.01: ATAPI: PIONEER DVD-RW DVR-K16RA, 1.16, max UDMA/33
isapnp: No Plug & Play device found
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/33
scsi 0:0:0:0: >Direct-Access ATA HTS421240H9AT00 HACO PQ: 0 ANSI: 5
sd 0:0:0:0: >[sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
sd 0:0:0:0: >[sda] Write Protect is off
sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: >Attached scsi generic sg0 type 0
Freeing initrd memory: 21040k freed
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: >[sda] Attached SCSI disk
Key type trusted registered
Key type encrypted registered
scsi 0:0:1:0: >CD-ROM PIONEER DVD-RW DVR-K16RA 1.16 PQ: 0 ANSI: 5
Magic number: 1:63:877
rtc_cmos 00:05: >setting system clock to 2013-02-12 08:53:36 UTC (1360659216)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: >Attached scsi CD-ROM sr0
sr 0:0:1:0: >Attached scsi generic sg1 type 5
Freeing unused kernel memory: 756k freed
Write protecting the kernel text: 5960k
Write protecting the kernel read-only data: 2424k
NX-protecting the kernel data: 4280k
udevd[90]: starting version 175
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
wmi: Mapper loaded
8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:06:07.0: >This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
8139too: 8139too Fast Ethernet driver 0.9.28
8139too 0000:06:07.0: >eth0: RealTek RTL8139 at 0x00013000, 00:0a:e4:fe:09:74, IRQ 20
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: >setting latency timer to 64
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
i915: fixme: max PWM is zero
[drm] initialized overlay support
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x50
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[336]: starting version 175
lp: driver loaded but no devices found
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
ppdev: user-space parallel port driver
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1360659242.002:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=554 comm="apparmor_parser"
type=1400 audit(1360659242.006:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=554 comm="apparmor_parser"
intel_rng: FWH not detected
yenta_cardbus 0000:06:09.0: >CardBus bridge found [1025:006a]
yenta_cardbus 0000:06:09.0: >Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:06:09.0: >Routing CardBus interrupts to PCI
yenta_cardbus 0000:06:09.0: >TI: mfunc 0x00001022, devctl 0x44
ACPI Warning: 0xf000b410-0xf000b414 SystemMemory conflicts with Region \RCRB 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
ACPI Warning: 0x00001180-0x000011bf SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
cfg80211: Calling CRDA to update world regulatory domain
type=1400 audit(1360659242.146:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=607 comm="apparmor_parser"
type=1400 audit(1360659242.146:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=607 comm="apparmor_parser"
type=1400 audit(1360659242.146:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=607 comm="apparmor_parser"
microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
yenta_cardbus 0000:06:09.0: >ISA IRQ mask 0x0cf8, PCI irq 22
yenta_cardbus 0000:06:09.0: >Socket status: 30000006
pci_bus 0000:06: >Raising subordinate bus# of parent bus (#06) from #06 to #0a
yenta_cardbus 0000:06:09.0: >pcmcia: parent PCI bridge window: [io 0x3000-0x3fff]
pcmcia_socket pcmcia_socket0: >cs: IO port probe 0x3000-0x3fff:
excluding 0x3000-0x30ff 0x3400-0x34ff 0x3800-0x38ff
yenta_cardbus 0000:06:09.0: >pcmcia: parent PCI bridge window: [mem 0xb0100000-0xb01fffff]
pcmcia_socket pcmcia_socket0: >cs: memory probe 0xb0100000-0xb01fffff:
excluding 0xb0100000-0xb011ffff
yenta_cardbus 0000:06:09.0: >pcmcia: parent PCI bridge window: [mem 0x30000000-0x33ffffff pref]
pcmcia_socket pcmcia_socket0: >cs: memory probe 0x30000000-0x33ffffff:
excluding 0x30000000-0x33ffffff
ath5k 0000:06:05.0: >registered as 'phy0'
psmouse serio4: >synaptics: Touchpad model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000/0x0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
init: failsafe main process (681) killed by TERM signal
snd_intel8x0 0000:00:1e.2: >setting latency timer to 64
type=1400 audit(1360659243.018:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=779 comm="apparmor_parser"
type=1400 audit(1360659243.034:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=779 comm="apparmor_parser"
type=1400 audit(1360659243.054:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=781 comm="apparmor_parser"
type=1400 audit(1360659243.054:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=781 comm="apparmor_parser"
type=1400 audit(1360659243.086:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=784 comm="apparmor_parser"
8139too 0000:06:07.0: >eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
acer_wmi: Acer Laptop ACPI-WMI Extras
input: Acer BMA150 accelerometer as /devices/virtual/input/input6
Registered led device: acer-wmi::mail
pcmcia_socket pcmcia_socket0: >cs: IO port probe 0x100-0x3af:
excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
pcmcia_socket pcmcia_socket0: >cs: IO port probe 0x3e0-0x4ff:
excluding 0x3f0-0x3f7 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: >cs: IO port probe 0x820-0x8ff:
microcode: Microcode Update Driver: v2.00 , Peter Oruba
init: alsa-restore main process (856) terminated with status 19
clean.
pcmcia_socket pcmcia_socket0: >cs: IO port probe 0xc00-0xcf7:
clean.
pcmcia_socket pcmcia_socket0: >cs: memory probe 0x0c0000-0x0fffff:
excluding 0xc0000-0xc7fff 0xcc000-0xd3fff 0xdc000-0xfffff
pcmcia_socket pcmcia_socket0: >cs: memory probe 0xa0000000-0xa0ffffff:
clean.
pcmcia_socket pcmcia_socket0: >cs: memory probe 0x60000000-0x60ffffff:
clean.
pcmcia_socket pcmcia_socket0: >cs: IO port probe 0xa00-0xaff:
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
intel8x0_measure_ac97_clock: measured 55635 usecs (2681 samples)
intel8x0: clocking to 48000
clean.
ath: EEPROM regdomain: 0x63
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x63
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
ieee80211 phy0: >Selected rate control algorithm 'minstrel_ht'
ath5k: phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Adding 775164k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:775164k