dmesg - test001
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-17-generic (buildd@roseapple) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #30-Ubuntu SMP Thu Mar 8 17:34:21 UTC 2012 (Ubuntu 3.0.0-17.30-generic 3.0.22)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 0000000020000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR variable ranges disabled:
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] CPU MTRRs all blank - virtualized system.
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-000000001fff0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001fc00000 page 2M
[ 0.000000] 001fc00000 - 001fff0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1fff0000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 1e938000 - 1f63a000
[ 0.000000] ACPI: RSDP 000e0000 00024 (v02 VBOX )
[ 0.000000] ACPI: XSDT 1fff0030 00034 (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
[ 0.000000] ACPI: FACP 1fff00f0 000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
[ 0.000000] ACPI: DSDT 1fff0410 01B96 (v01 VBOX VBOXBIOS 00000002 INTL 20100528)
[ 0.000000] ACPI: FACS 1fff0200 00040
[ 0.000000] ACPI: SSDT 1fff0240 001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1fff0000
[ 0.000000] low ram: 0 - 1fff0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001fff0
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001fff0
[ 0.000000] On node 0 totalpages: 130943
[ 0.000000] free_area_init_node: node 0, pgdat c17b54c0, node_mem_map dfbef200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 125968 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Found and enabled local APIC!
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dffc0000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @de400000 s26240 r0 d22912 u4194304
[ 0.000000] pcpu-alloc: s26240 r0 d22912 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129919
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2096640 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 494284k/524224k available (5340k kernel code, 29488k reserved, 2595k data, 696k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xe07f0000 - 0xff7fe000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 0.000000] .init : 0xc17c1000 - 0xc186f000 ( 696 kB)
[ 0.000000] .data : 0xc15371c4 - 0xc17c0140 (2595 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15371c4 (5340 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=de006000 soft=de008000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: Unable to calibrate against PIT
[ 0.000000] TSC: using PMTIMER reference calibration
[ 0.000000] Detected 2323.874 MHz processor.
[ 0.028266] Calibrating delay loop (skipped), value calculated using timer frequency.. 4647.74 BogoMIPS (lpj=9295496)
[ 0.028894] pid_max: default: 32768 minimum: 301
[ 0.029398] Security Framework initialized
[ 0.033060] AppArmor: AppArmor initialized
[ 0.033281] Yama: becoming mindful.
[ 0.034315] Mount-cache hash table entries: 512
[ 0.040733] Initializing cgroup subsys cpuacct
[ 0.041164] Initializing cgroup subsys memory
[ 0.041673] Initializing cgroup subsys devices
[ 0.041843] Initializing cgroup subsys freezer
[ 0.042012] Initializing cgroup subsys net_cls
[ 0.042221] Initializing cgroup subsys blkio
[ 0.042717] Initializing cgroup subsys perf_event
[ 0.043535] mce: CPU supports 0 MCE banks
[ 0.043952] using mwait in idle threads.
[ 0.057231] SMP alternatives: switching to UP code
[ 0.552033] Freeing SMP alternatives: 24k freed
[ 0.556663] ACPI: Core revision 20110413
[ 0.569449] ACPI: setting ELCR to 0200 (from 0e20)
[ 0.572711] ftrace: allocating 24903 entries in 49 pages
[ 0.655502] weird, boot CPU (#0) not listed by the BIOS.
[ 0.656500] SMP motherboard not detected.
[ 0.656739] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.660040] APIC calibration not consistent with PM-Timer: 96ms instead of 100ms
[ 0.660040] APIC delta adjusted to PM-Timer: 6251309 (6011948)
[ 0.660040] SMP disabled
[ 0.660040] Performance Events: unsupported p6 CPU model 23 no PMU driver, software events only.
[ 0.736504] Brought up 1 CPUs
[ 0.737794] Total of 1 processors activated (4647.74 BogoMIPS).
[ 0.747421] devtmpfs: initialized
[ 0.760046] print_constraints: dummy:
[ 0.761801] Time: 21:14:27 Date: 02/12/13
[ 0.768671] NET: Registered protocol family 16
[ 0.774498] EISA bus registered
[ 0.775084] ACPI: bus type pci registered
[ 0.784467] PCI: PCI BIOS revision 2.10 entry at 0xfda26, last bus=0
[ 0.784683] PCI: Using configuration type 1 for base access
[ 0.793769] bio: create slab at 0
[ 0.804529] ACPI: EC: Look up EC in DSDT
[ 0.806419] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.813221] ACPI: Interpreter enabled
[ 0.813389] ACPI: (supports S0 S5)
[ 0.813548] ACPI: Using PIC for interrupt routing
[ 0.818446] ACPI: No dock devices found.
[ 0.818520] HEST: Table not found.
[ 0.818590] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.822998] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.823688] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.823995] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.824943] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.825197] pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xffdfffff] (ignored)
[ 0.829121] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
[ 0.830863] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
[ 0.831718] pci 0000:00:01.1: [8086:7111] type 0 class 0x000101
[ 0.832737] pci 0000:00:01.1: reg 20: [io 0xd000-0xd00f]
[ 0.833169] pci 0000:00:02.0: [80ee:beef] type 0 class 0x000300
[ 0.835346] pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe0ffffff pref]
[ 0.847123] pci 0000:00:03.0: [8086:100e] type 0 class 0x000200
[ 0.848468] pci 0000:00:03.0: reg 10: [mem 0xf0000000-0xf001ffff]
[ 0.852354] pci 0000:00:03.0: reg 18: [io 0xd010-0xd017]
[ 0.858444] pci 0000:00:04.0: [80ee:cafe] type 0 class 0x000880
[ 0.859832] pci 0000:00:04.0: reg 10: [io 0xd020-0xd03f]
[ 0.860496] pci 0000:00:04.0: reg 14: [mem 0xf0400000-0xf07fffff]
[ 0.861961] pci 0000:00:04.0: reg 18: [mem 0xf0800000-0xf0803fff pref]
[ 0.867221] pci 0000:00:05.0: [8086:2415] type 0 class 0x000401
[ 0.867423] pci 0000:00:05.0: reg 10: [io 0xd100-0xd1ff]
[ 0.867573] pci 0000:00:05.0: reg 14: [io 0xd200-0xd23f]
[ 0.868483] pci 0000:00:06.0: [106b:003f] type 0 class 0x000c03
[ 0.870124] pci 0000:00:06.0: reg 10: [mem 0xf0804000-0xf0804fff]
[ 0.878046] pci 0000:00:07.0: [8086:7113] type 0 class 0x000680
[ 0.878904] pci 0000:00:0b.0: [8086:265c] type 0 class 0x000c03
[ 0.880735] pci 0000:00:0b.0: reg 10: [mem 0xf0805000-0xf0805fff]
[ 0.890273] pci 0000:00:0d.0: [8086:2829] type 0 class 0x000106
[ 0.891872] pci 0000:00:0d.0: reg 10: [io 0xd240-0xd247]
[ 0.895615] pci 0000:00:0d.0: reg 18: [io 0xd250-0xd257]
[ 0.897777] pci 0000:00:0d.0: reg 20: [io 0xd260-0xd26f]
[ 0.899173] pci 0000:00:0d.0: reg 24: [mem 0xf0806000-0xf0807fff]
[ 0.901012] pci_bus 0000:00: on NUMA node 0
[ 0.901128] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.902681] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.910601] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11)
[ 0.910992] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
[ 0.911175] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
[ 0.911355] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
[ 0.912056] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.912186] vgaarb: loaded
[ 0.912205] vgaarb: bridge control possible 0000:00:02.0
[ 0.917992] SCSI subsystem initialized
[ 0.918634] libata version 3.00 loaded.
[ 0.918951] usbcore: registered new interface driver usbfs
[ 0.918995] usbcore: registered new interface driver hub
[ 0.919197] usbcore: registered new device driver usb
[ 0.926106] PCI: Using ACPI for IRQ routing
[ 0.926343] PCI: pci_cache_line_size set to 64 bytes
[ 0.927021] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.927176] reserve RAM buffer: 000000001fff0000 - 000000001fffffff
[ 0.928517] NetLabel: Initializing
[ 0.928635] NetLabel: domain hash size = 128
[ 0.928718] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.928852] NetLabel: unlabeled traffic allowed by default
[ 0.970170] AppArmor: AppArmor Filesystem Enabled
[ 0.970374] pnp: PnP ACPI init
[ 0.972096] ACPI: bus type pnp registered
[ 0.972470] pnp 00:00: [bus 00-ff]
[ 0.972484] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.972498] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.972511] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.972524] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.972538] pnp 00:00: [mem 0x20000000-0xffdfffff window]
[ 0.972691] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.972738] pnp 00:01: [io 0x0060]
[ 0.972750] pnp 00:01: [io 0x0064]
[ 0.972772] pnp 00:01: [irq 1]
[ 0.972818] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.972847] pnp 00:02: [io 0x0000-0x000f]
[ 0.972860] pnp 00:02: [io 0x0080-0x008f]
[ 0.972872] pnp 00:02: [io 0x00c0-0x00df]
[ 0.972885] pnp 00:02: [dma 4]
[ 0.972922] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.973001] pnp 00:03: [irq 12]
[ 0.973051] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 (active)
[ 0.973089] pnp 00:04: [io 0x0378-0x037f]
[ 0.973102] pnp 00:04: [io 0x0778-0x077f]
[ 0.973114] pnp 00:04: [irq 7]
[ 0.973152] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.973999] pnp: PnP ACPI: found 5 devices
[ 0.974023] ACPI: ACPI bus type pnp unregistered
[ 0.974051] PnPBIOS: Disabled by ACPI PNP
[ 1.015766] Switching to clocksource acpi_pm
[ 1.016664] PCI: max bus depth: 0 pci_try_num: 1
[ 1.016917] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 1.016934] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 1.017183] NET: Registered protocol family 2
[ 1.019919] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 1.022047] Switched to NOHz mode on CPU #0
[ 1.025486] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 1.025660] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 1.025797] TCP: Hash tables configured (established 16384 bind 16384)
[ 1.025827] TCP reno registered
[ 1.025852] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 1.025891] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 1.026042] NET: Registered protocol family 1
[ 1.026113] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 1.026203] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 1.026270] pci 0000:00:02.0: Boot video device
[ 1.026650] PCI: CLS 0 bytes, default 64
[ 1.029993] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 1.033849] Trying to unpack rootfs image as initramfs...
[ 1.041392] audit: initializing netlink socket (disabled)
[ 1.042843] type=2000 audit(1360703666.040:1): initialized
[ 1.093469] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.104174] VFS: Disk quotas dquot_6.5.2
[ 1.104314] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.105476] fuse init (API version 7.16)
[ 1.105637] msgmni has been set to 965
[ 1.136487] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.136726] io scheduler noop registered
[ 1.136749] io scheduler deadline registered
[ 1.136784] io scheduler cfq registered (default)
[ 1.137233] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.137302] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.137770] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.137960] ACPI: AC Adapter [AC] (on-line)
[ 1.142825] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.142937] ACPI: Power Button [PWRF]
[ 1.143161] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 1.143205] ACPI: Sleep Button [SLPF]
[ 1.143300] ACPI: acpi_idle registered with cpuidle
[ 1.149997] ERST: Table is not found!
[ 1.160298] isapnp: Scanning for PnP cards...
[ 1.220373] Linux agpgart interface v0.103
[ 1.234178] brd: module loaded
[ 1.235190] loop: module loaded
[ 1.244824] ata_piix 0000:00:01.1: version 2.13
[ 1.263357] ata_piix 0000:00:01.1: setting latency timer to 64
[ 1.324960] scsi0 : ata_piix
[ 1.328239] scsi1 : ata_piix
[ 1.328600] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 1.328643] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 1.330466] Fixed MDIO Bus: probed
[ 1.330552] PPP generic driver version 2.4.2
[ 1.330765] tun: Universal TUN/TAP device driver, 1.6
[ 1.330790] tun: (C) 1999-2004 Max Krasnyansky
[ 1.331110] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.331695] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 1.331729] PCI: setting IRQ 10 as level-triggered
[ 1.331753] ehci_hcd 0000:00:0b.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 1.331878] ehci_hcd 0000:00:0b.0: setting latency timer to 64
[ 1.331909] ehci_hcd 0000:00:0b.0: EHCI Host Controller
[ 1.331995] ehci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
[ 1.372938] ehci_hcd 0000:00:0b.0: irq 10, io mem 0xf0805000
[ 1.385091] ehci_hcd 0000:00:0b.0: USB 2.0 started, EHCI 1.00
[ 1.408890] hub 1-0:1.0: USB hub found
[ 1.411127] hub 1-0:1.0: 8 ports detected
[ 1.416193] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.416811] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 1.416845] PCI: setting IRQ 11 as level-triggered
[ 1.416867] ohci_hcd 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 1.416997] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 1.417029] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 1.417263] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 2
[ 1.417378] ohci_hcd 0000:00:06.0: irq 11, io mem 0xf0804000
[ 1.474750] hub 2-0:1.0: USB hub found
[ 1.480126] hub 2-0:1.0: 8 ports detected
[ 1.483230] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.483478] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.060676] Refined TSC clocksource calibration: 2323.871 MHz.
[ 2.060932] Switching to clocksource tsc
[ 2.066383] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 2.076131] ata2.00: configured for UDMA/33
[ 2.436338] isapnp: No Plug & Play device found
[ 2.520023] scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
[ 2.520421] usb 2-1: new full speed USB device number 2 using ohci_hcd
[ 2.548183] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
[ 2.548252] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.551635] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.563179] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 2.713115] Freeing initrd memory: 13320k freed
[ 2.732359] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.733701] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.734916] mousedev: PS/2 mouse device common for all mice
[ 2.748581] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 2.751099] rtc0: alarms up to one day, 114 bytes nvram
[ 2.751535] device-mapper: uevent: version 1.0.3
[ 2.751996] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 2.756560] EISA: Probing bus 0 at eisa.0
[ 2.756631] Cannot allocate resource for EISA slot 4
[ 2.756681] EISA: Detected 0 cards.
[ 2.758391] cpufreq-nforce2: No nForce2 chipset.
[ 2.758458] cpuidle: using governor ladder
[ 2.758482] cpuidle: using governor menu
[ 2.758509] EFI Variables Facility v0.08 2004-May-17
[ 2.759148] TCP cubic registered
[ 2.759392] NET: Registered protocol family 10
[ 2.775649] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 2.783240] NET: Registered protocol family 17
[ 2.783356] Registering the dns_resolver key type
[ 2.783523] Using IPI No-Shortcut mode
[ 2.783792] PM: Hibernation image not present or could not be loaded.
[ 2.783949] registered taskstats version 1
[ 2.838118] Magic number: 1:273:247
[ 2.838735] rtc_cmos rtc_cmos: setting system clock to 2013-02-12 21:14:29 UTC (1360703669)
[ 2.842583] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.842637] EDD information not available.
[ 2.850794] Freeing unused kernel memory: 696k freed
[ 2.859972] Write protecting the kernel text: 5344k
[ 2.863197] Write protecting the kernel read-only data: 2192k
[ 3.056862] udevd[80]: starting version 173
[ 3.934435] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 3.934484] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 3.998485] e1000 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 3.998603] e1000 0000:00:03.0: setting latency timer to 64
[ 4.525118] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input3
[ 4.525492] generic-usb 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
[ 4.525673] usbcore: registered new interface driver usbhid
[ 4.525700] usbhid: USB HID core driver
[ 4.558274] e1000 0000:00:03.0: eth0: (PCI:33MHz:32-bit) 08:00:27:25:3a:cd
[ 4.559470] e1000 0000:00:03.0: eth0: Intel(R) PRO/1000 Network Connection
[ 4.559835] ahci 0000:00:0d.0: version 3.0
[ 4.560944] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
[ 4.560979] PCI: setting IRQ 5 as level-triggered
[ 4.561006] ahci 0000:00:0d.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
[ 4.561556] ahci: SSS flag set, parallel bus scan disabled
[ 4.562014] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 4.562057] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
[ 4.562108] ahci 0000:00:0d.0: setting latency timer to 64
[ 4.570478] scsi2 : ahci
[ 4.570691] ata3: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 5
[ 4.888354] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.892696] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 4.892768] ata3.00: 1048576000 sectors, multi 128: LBA48 NCQ (depth 31/32)
[ 4.893277] ata3.00: configured for UDMA/133
[ 4.895876] scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
[ 4.898101] sd 2:0:0:0: [sda] 1048576000 512-byte logical blocks: (536 GB/500 GiB)
[ 4.901787] sd 2:0:0:0: [sda] Write Protect is off
[ 4.901835] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.902063] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.904212] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 4.971305] sda: sda1 sda2 < sda5 >
[ 4.974304] sd 2:0:0:0: [sda] Attached SCSI disk
[ 5.473197] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 15.217950] udevd[257]: starting version 173
[ 15.325981] Adding 522236k swap on /dev/sda5. Priority:-1 extents:1 across:522236k
[ 15.551789] lp: driver loaded but no devices found
[ 16.655990] parport_pc 00:04: reported by Plug and Play ACPI
[ 16.882561] type=1400 audit(1360703683.539:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=319 comm="apparmor_parser"
[ 16.896773] type=1400 audit(1360703683.555:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=319 comm="apparmor_parser"
[ 16.897073] type=1400 audit(1360703683.555:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=319 comm="apparmor_parser"
[ 17.232740] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 17.881769] piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 18.159269] Intel ICH 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
[ 18.159463] Intel ICH 0000:00:05.0: setting latency timer to 64
[ 18.222520] psmouse serio1: ID: 10 00 64
[ 18.245482] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 18.832377] intel8x0_measure_ac97_clock: measured 102982 usecs (13997 samples)
[ 18.832443] intel8x0: measured clock 135916 rejected
[ 19.194280] intel8x0_measure_ac97_clock: measured 56974 usecs (12004 samples)
[ 19.194298] intel8x0: measured clock 210692 rejected
[ 19.555715] intel8x0_measure_ac97_clock: measured 57823 usecs (12003 samples)
[ 19.555732] intel8x0: measured clock 207581 rejected
[ 19.555747] intel8x0: clocking to 48000
[ 22.205443] ppdev: user-space parallel port driver
[ 22.960281] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 22.960297] vesafb: scrolling: redraw
[ 22.960311] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 22.960343] mtrr: your processor doesn't support write-combining
[ 22.960635] vesafb: framebuffer at 0xe0000000, mapped to 0xe0a00000, using 1216k, total 1216k
[ 22.961287] fbcon: VESA VGA (fb0) is primary device
[ 22.962164] Console: switching to colour frame buffer device 80x30
[ 22.964726] fb0: VESA VGA frame buffer device
[ 27.472099] eth0: no IPv6 routers present
[ 37.877162] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 39.078108] type=1400 audit(1360703706.778:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=648 comm="apparmor_parser"
[ 39.092616] type=1400 audit(1360703706.790:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=648 comm="apparmor_parser"
[ 39.092934] type=1400 audit(1360703706.790:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=648 comm="apparmor_parser"
[ 39.261757] type=1400 audit(1360703706.958:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=649 comm="apparmor_parser"
[ 39.282513] type=1400 audit(1360703706.978:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=649 comm="apparmor_parser"
[ 39.288631] type=1400 audit(1360703706.986:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=649 comm="apparmor_parser"
[ 39.418023] type=1400 audit(1360703707.118:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=656 comm="apparmor_parser"
[ 39.418723] type=1400 audit(1360703707.118:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=656 comm="apparmor_parser"
[ 39.439571] type=1400 audit(1360703707.134:13): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=657 comm="apparmor_parser"
[ 40.005800] init: failsafe main process (594) killed by TERM signal
[ 40.029830] init: apport pre-start process (689) terminated with status 1
[ 40.222497] init: apport post-stop process (707) terminated with status 1
[ 40.877089] Bluetooth: Core ver 2.16
[ 40.877089] NET: Registered protocol family 31
[ 40.877089] Bluetooth: HCI device and connection manager initialized
[ 40.877089] Bluetooth: HCI socket layer initialized
[ 40.877089] Bluetooth: L2CAP socket layer initialized
[ 40.881687] Bluetooth: SCO socket layer initialized
[ 40.920431] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 40.920452] Bluetooth: BNEP filters: protocol multicast
[ 40.955990] Bluetooth: RFCOMM TTY layer initialized
[ 40.956648] Bluetooth: RFCOMM socket layer initialized
[ 40.956668] Bluetooth: RFCOMM ver 1.11
[ 42.563376] init: plymouth-stop pre-start process (898) terminated with status 1
[ 49.420959] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 982.116321] ata2: lost interrupt (Status 0x0)
[ 982.120049] ata2: drained 65536 bytes to clear DRQ.
[ 982.199871] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 982.199905] sr 1:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 982.199970] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 982.199979] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 982.199995] ata2.00: status: { DRDY }
[ 982.200214] ata2: soft resetting link
[ 987.361887] ata2.00: qc timeout (cmd 0xa1)
[ 987.362833] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 987.362854] ata2.00: revalidation failed (errno=-5)
[ 987.363049] ata2: soft resetting link
[ 997.516507] ata2.00: qc timeout (cmd 0xa1)
[ 997.516595] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 997.516615] ata2.00: revalidation failed (errno=-5)
[ 997.516802] ata2: soft resetting link
[ 1027.672307] ata2.00: qc timeout (cmd 0xa1)
[ 1027.672409] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 1027.672434] ata2.00: revalidation failed (errno=-5)
[ 1027.672460] ata2.00: disabled
[ 1027.672705] ata2: soft resetting link
[ 1027.828478] ata2: EH complete