dmesg - teste2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfe8ffff] usable
BIOS-e820: [mem 0x00000000cfe90000-0x00000000cfea7fff] ACPI data
BIOS-e820: [mem 0x00000000cfea8000-0x00000000cfecffff] ACPI NVS
BIOS-e820: [mem 0x00000000cfed0000-0x00000000cfefffff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
NX (Execute Disable) protection: active
DMI present.
DMI: System manufacturer System Product Name/M4A79T Deluxe, BIOS 2402 01/06/2010
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000130000000 aka 4864M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcfe90 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xcfe8ffff]
[mem 0x00000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcfdfffff] page 2M
[mem 0xcfe00000-0xcfe8ffff] page 4k
kernel direct mapping tables up to 0xcfe8ffff @ [mem 0x1fffd000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x12fffffff]
[mem 0x100000000-0x12fffffff] page 2M
kernel direct mapping tables up to 0x12fffffff @ [mem 0xcfe8e000-0xcfe8ffff]
RAMDISK: [mem 0x362e6000-0x3716afff]
ACPI: RSDP 00000000000fb860 00014 (v00 ACPIAM)
ACPI: RSDT 00000000cfe90000 0003C (v01 010610 RSDT1758 20100106 MSFT 00000097)
ACPI: FACP 00000000cfe90200 00084 (v01 010610 FACP1758 20100106 MSFT 00000097)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120320/tbfadt-579)
ACPI: DSDT 00000000cfe90450 0E6DE (v01 A1160 A1160000 00000000 INTL 20060113)
ACPI: FACS 00000000cfea8000 00040
ACPI: APIC 00000000cfe90390 0007C (v01 010610 APIC1758 20100106 MSFT 00000097)
ACPI: MCFG 00000000cfe90410 0003C (v01 010610 OEMMCFG 20100106 MSFT 00000097)
ACPI: OEMB 00000000cfea8040 00072 (v01 010610 OEMB1758 20100106 MSFT 00000097)
ACPI: HPET 00000000cfe9f450 00038 (v01 010610 OEMHPET 20100106 MSFT 00000097)
ACPI: SSDT 00000000cfe9f490 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
Initmem setup node 0 [mem 0x00000000-0x12fffffff]
NODE_DATA [mem 0x12fffc000-0x12fffffff]
[ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x12fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0xcfe8ffff]
node 0: [mem 0x100000000-0x12fffffff]
On node 0 totalpages: 1048095
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3913 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 831184 pages, LIFO batch:31
Normal zone: 3072 pages used for memmap
Normal zone: 193536 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
SMP: Allowing 6 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
PM: Registered nosave memory: 00000000cfe90000 - 00000000cfea8000
PM: Registered nosave memory: 00000000cfea8000 - 00000000cfed0000
PM: Registered nosave memory: 00000000cfed0000 - 00000000cff00000
PM: Registered nosave memory: 00000000cff00000 - 00000000fff00000
PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
e820: [mem 0xcff00000-0xffefffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s83584 r8192 d22912 u262144
pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028633
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Node 0: aperture @ c4000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
Memory: 3963868k/4980736k available (6711k kernel code, 788356k absent, 228512k reserved, 6459k data, 928k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:728 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3411.533 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6823.06 BogoMIPS (lpj=13646132)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
ACPI: Core revision 20120320
ftrace: allocating 25118 entries in 99 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X4 965 Processor stepping 03
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 #2 #3
Brought up 4 CPUs
Total of 4 processors activated (27292.26 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcfea8000-0xcfecffff] (163840 bytes)
dummy:
RTC time: 23:33:09, date: 02/06/13
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, ffffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
TOM2: 0000000130000000 aka 4864M
bus: [00, 07] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xd0000000-0xdfffffff]
bus: 00 [mem 0x130000000-0xfcffffffff]
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
Freeing initrd memory: 14868k freed
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: >host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: >host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: >host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: >host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: >host bridge window [mem 0xcff00000-0xdfffffff]
pci_root PNP0A03:00: >host bridge window [mem 0xf0000000-0xfebfffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: >root bus resource [mem 0xcff00000-0xdfffffff]
pci_bus 0000:00: >root bus resource [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: >[1002:5956] type 00 class 0x060000
pci 0000:00:00.0: >reg 1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:02.0: >[1002:5978] type 01 class 0x060400
pci 0000:00:02.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: >[1002:597c] type 01 class 0x060400
pci 0000:00:06.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: >[1002:597d] type 01 class 0x060400
pci 0000:00:07.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: >[1002:4390] type 00 class 0x01018f
pci 0000:00:11.0: >reg 10: [io 0xb000-0xb007]
pci 0000:00:11.0: >reg 14: [io 0xa000-0xa003]
pci 0000:00:11.0: >reg 18: [io 0x9000-0x9007]
pci 0000:00:11.0: >reg 1c: [io 0x8000-0x8003]
pci 0000:00:11.0: >reg 20: [io 0x7000-0x700f]
pci 0000:00:11.0: >reg 24: [mem 0xf7dfe400-0xf7dfe7ff]
pci 0000:00:11.0: >set SATA to AHCI mode
pci 0000:00:12.0: >[1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: >reg 10: [mem 0xf7df6000-0xf7df6fff]
pci 0000:00:12.1: >[1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: >reg 10: [mem 0xf7df7000-0xf7df7fff]
pci 0000:00:12.2: >[1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: >reg 10: [mem 0xf7dfe800-0xf7dfe8ff]
pci 0000:00:12.2: >supports D1 D2
pci 0000:00:12.2: >PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: >[1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: >reg 10: [mem 0xf7dfc000-0xf7dfcfff]
pci 0000:00:13.1: >[1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: >reg 10: [mem 0xf7dfd000-0xf7dfdfff]
pci 0000:00:13.2: >[1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: >reg 10: [mem 0xf7dfec00-0xf7dfecff]
pci 0000:00:13.2: >supports D1 D2
pci 0000:00:13.2: >PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: >[1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: >[1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: >reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: >reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: >reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: >reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: >reg 20: [io 0xff00-0xff0f]
pci 0000:00:14.2: >[1002:4383] type 00 class 0x040300
pci 0000:00:14.2: >reg 10: [mem 0xf7df8000-0xf7dfbfff 64bit]
pci 0000:00:14.2: >PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: >[1002:439d] type 00 class 0x060100
pci 0000:00:14.4: >[1002:4384] type 01 class 0x060401
pci 0000:00:14.5: >[1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: >reg 10: [mem 0xf7dff000-0xf7dfffff]
pci 0000:00:18.0: >[1022:1200] type 00 class 0x060000
pci 0000:00:18.1: >[1022:1201] type 00 class 0x060000
pci 0000:00:18.2: >[1022:1202] type 00 class 0x060000
pci 0000:00:18.3: >[1022:1203] type 00 class 0x060000
pci 0000:00:18.4: >[1022:1204] type 00 class 0x060000
pci 0000:04:00.0: >[10de:0e23] type 00 class 0x030000
pci 0000:04:00.0: >reg 10: [mem 0xf8000000-0xf9ffffff]
pci 0000:04:00.0: >reg 14: [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:04:00.0: >reg 1c: [mem 0xd4000000-0xd7ffffff 64bit pref]
pci 0000:04:00.0: >reg 24: [io 0xec00-0xec7f]
pci 0000:04:00.0: >reg 30: [mem 0xfbf00000-0xfbf7ffff pref]
pci 0000:04:00.1: >[10de:0beb] type 00 class 0x040300
pci 0000:04:00.1: >reg 10: [mem 0xfbffc000-0xfbffffff]
pci 0000:00:02.0: >PCI bridge to [bus 04-04]
pci 0000:00:02.0: > bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: > bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:02.0: > bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: >[10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: >reg 10: [io 0xd800-0xd8ff]
pci 0000:03:00.0: >reg 18: [mem 0xf7fff000-0xf7ffffff 64bit]
pci 0000:03:00.0: >reg 30: [mem 0xf7fc0000-0xf7fdffff pref]
pci 0000:03:00.0: >supports D1 D2
pci 0000:03:00.0: >PME# supported from D1 D2 D3hot D3cold
pci 0000:03:00.0: >disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:06.0: >PCI bridge to [bus 03-03]
pci 0000:00:06.0: > bridge window [io 0xd000-0xdfff]
pci 0000:00:06.0: > bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:02:00.0: >[1106:3403] type 00 class 0x0c0010
pci 0000:02:00.0: >reg 10: [mem 0xf7eff800-0xf7efffff 64bit]
pci 0000:02:00.0: >reg 18: [io 0xc800-0xc8ff]
pci 0000:02:00.0: >supports D2
pci 0000:02:00.0: >PME# supported from D2 D3hot D3cold
pci 0000:00:07.0: >PCI bridge to [bus 02-02]
pci 0000:00:07.0: > bridge window [io 0xc000-0xcfff]
pci 0000:00:07.0: > bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:14.4: >PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:14.4: > bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: > bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: > bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
pci0000:00: >Requesting ACPI _OSC control (0x1d)
pci0000:00: >ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:04:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: >no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfe90000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-ff]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0000-0x0cf7 window]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000d0000-0x000dffff window]
pnp 00:00: >[mem 0xcff00000-0xdfffffff window]
pnp 00:00: >[mem 0xf0000000-0xfebfffff window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: >[dma 4]
pnp 00:01: >[io 0x0000-0x000f]
pnp 00:01: >[io 0x0081-0x0083]
pnp 00:01: >[io 0x0087]
pnp 00:01: >[io 0x0089-0x008b]
pnp 00:01: >[io 0x008f]
pnp 00:01: >[io 0x00c0-0x00df]
pnp 00:01: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: >[io 0x0070-0x0071]
pnp 00:02: >[irq 8]
pnp 00:02: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: >[io 0x0061]
pnp 00:03: >Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: >[io 0x00f0-0x00ff]
pnp 00:04: >[irq 13]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: >[mem 0xfed00000-0xfed003ff]
pnp 00:05: >Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:06: >[io 0x0060]
pnp 00:06: >[io 0x0064]
pnp 00:06: >[mem 0xfec00000-0xfec00fff]
pnp 00:06: >[mem 0xfee00000-0xfee00fff]
system 00:06: >[mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: >[mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: >[io 0x0010-0x001f]
pnp 00:07: >[io 0x0022-0x003f]
pnp 00:07: >[io 0x0062-0x0063]
pnp 00:07: >[io 0x0065-0x006f]
pnp 00:07: >[io 0x0072-0x007f]
pnp 00:07: >[io 0x0080]
pnp 00:07: >[io 0x0084-0x0086]
pnp 00:07: >[io 0x0088]
pnp 00:07: >[io 0x008c-0x008e]
pnp 00:07: >[io 0x0090-0x009f]
pnp 00:07: >[io 0x00a2-0x00bf]
pnp 00:07: >[io 0x00b1]
pnp 00:07: >[io 0x00e0-0x00ef]
pnp 00:07: >[io 0x04d0-0x04d1]
pnp 00:07: >[io 0x040b]
pnp 00:07: >[io 0x04d6]
pnp 00:07: >[io 0x0c00-0x0c01]
pnp 00:07: >[io 0x0c14]
pnp 00:07: >[io 0x0c50-0x0c51]
pnp 00:07: >[io 0x0c52]
pnp 00:07: >[io 0x0c6c]
pnp 00:07: >[io 0x0c6f]
pnp 00:07: >[io 0x0cd0-0x0cd1]
pnp 00:07: >[io 0x0cd2-0x0cd3]
pnp 00:07: >[io 0x0cd4-0x0cd5]
pnp 00:07: >[io 0x0cd6-0x0cd7]
pnp 00:07: >[io 0x0cd8-0x0cdf]
pnp 00:07: >[io 0x0b00-0x0b3f]
pnp 00:07: >[io 0x0800-0x089f]
pnp 00:07: >[io 0x0000-0xffffffffffffffff disabled]
pnp 00:07: >[io 0x0b00-0x0b0f]
pnp 00:07: >[io 0x0b20-0x0b3f]
pnp 00:07: >[io 0x0900-0x090f]
pnp 00:07: >[io 0x0910-0x091f]
pnp 00:07: >[io 0xfe00-0xfefe]
pnp 00:07: >[io 0x0060]
pnp 00:07: >[io 0x0064]
pnp 00:07: >[mem 0xcff00000-0xcfffffff]
pnp 00:07: >[mem 0xffb80000-0xffbfffff]
pnp 00:07: >[mem 0xfec10000-0xfec1001f]
system 00:07: >[io 0x04d0-0x04d1] has been reserved
system 00:07: >[io 0x040b] has been reserved
system 00:07: >[io 0x04d6] has been reserved
system 00:07: >[io 0x0c00-0x0c01] has been reserved
system 00:07: >[io 0x0c14] has been reserved
system 00:07: >[io 0x0c50-0x0c51] has been reserved
system 00:07: >[io 0x0c52] has been reserved
system 00:07: >[io 0x0c6c] has been reserved
system 00:07: >[io 0x0c6f] has been reserved
system 00:07: >[io 0x0cd0-0x0cd1] has been reserved
system 00:07: >[io 0x0cd2-0x0cd3] has been reserved
system 00:07: >[io 0x0cd4-0x0cd5] has been reserved
system 00:07: >[io 0x0cd6-0x0cd7] has been reserved
system 00:07: >[io 0x0cd8-0x0cdf] has been reserved
system 00:07: >[io 0x0b00-0x0b3f] has been reserved
system 00:07: >[io 0x0800-0x089f] has been reserved
system 00:07: >[io 0x0b00-0x0b0f] has been reserved
system 00:07: >[io 0x0b20-0x0b3f] has been reserved
system 00:07: >[io 0x0900-0x090f] has been reserved
system 00:07: >[io 0x0910-0x091f] has been reserved
system 00:07: >[io 0xfe00-0xfefe] has been reserved
system 00:07: >[mem 0xcff00000-0xcfffffff] has been reserved
system 00:07: >[mem 0xffb80000-0xffbfffff] has been reserved
system 00:07: >[mem 0xfec10000-0xfec1001f] has been reserved
system 00:07: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: >[io 0x03f8-0x03ff]
pnp 00:08: >[irq 4]
pnp 00:08: >[dma 0 disabled]
pnp 00:08: >Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: >[io 0x03f0-0x03f5]
pnp 00:09: >[io 0x03f7]
pnp 00:09: >[irq 6]
pnp 00:09: >[dma 2]
pnp 00:09: >Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:0a: >[io 0x0000-0xffffffffffffffff disabled]
pnp 00:0a: >[io 0x0230-0x023f]
pnp 00:0a: >[io 0x0290-0x029f]
pnp 00:0a: >[io 0x0f40-0x0f4f]
pnp 00:0a: >[io 0x0a30-0x0a3f]
system 00:0a: >[io 0x0230-0x023f] has been reserved
system 00:0a: >[io 0x0290-0x029f] has been reserved
system 00:0a: >[io 0x0f40-0x0f4f] has been reserved
system 00:0a: >[io 0x0a30-0x0a3f] has been reserved
system 00:0a: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: >[mem 0xe0000000-0xefffffff]
system 00:0b: >[mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: >[mem 0x00000000-0x0009ffff]
pnp 00:0c: >[mem 0x000c0000-0x000cffff]
pnp 00:0c: >[mem 0x000e0000-0x000fffff]
pnp 00:0c: >[mem 0x00100000-0xcfefffff]
pnp 00:0c: >[mem 0xfec00000-0xffffffff]
pnp 00:0c: >disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0c: >disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0c: >disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0c: >disabling [mem 0x00100000-0xcfefffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
system 00:0c: >[mem 0xfec00000-0xffffffff] could not be reserved
system 00:0c: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:02.0: >PCI bridge to [bus 04-04]
pci 0000:00:02.0: > bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: > bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:02.0: > bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
pci 0000:00:06.0: >PCI bridge to [bus 03-03]
pci 0000:00:06.0: > bridge window [io 0xd000-0xdfff]
pci 0000:00:06.0: > bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:00:07.0: >PCI bridge to [bus 02-02]
pci 0000:00:07.0: > bridge window [io 0xc000-0xcfff]
pci 0000:00:07.0: > bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:14.4: >PCI bridge to [bus 01-01]
pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: >resource 8 [mem 0xcff00000-0xdfffffff]
pci_bus 0000:00: >resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:04: >resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: >resource 1 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:04: >resource 2 [mem 0xd4000000-0xdfffffff 64bit pref]
pci_bus 0000:03: >resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: >resource 1 [mem 0xf7f00000-0xf7ffffff]
pci_bus 0000:02: >resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: >resource 1 [mem 0xf7e00000-0xf7efffff]
pci_bus 0000:01: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: >resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:01: >resource 8 [mem 0xcff00000-0xdfffffff]
pci_bus 0000:01: >resource 9 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:04:00.0: >Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
audit: initializing netlink socket (disabled)
type=2000 audit(1360193589.760:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 7899
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: >irq 40 for MSI/MSI-X
pcieport 0000:00:06.0: >irq 41 for MSI/MSI-X
pcieport 0000:00:07.0: >irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: >version 3.0
ahci 0000:00:11.0: >irq 43 for MSI/MSI-X
ahci 0000:00:11.0: >AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: >flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xf7dfe400 port 0xf7dfe500 irq 43
ata2: SATA max UDMA/133 abar m1024@0xf7dfe400 port 0xf7dfe580 irq 43
ata3: SATA max UDMA/133 abar m1024@0xf7dfe400 port 0xf7dfe600 irq 43
ata4: SATA max UDMA/133 abar m1024@0xf7dfe400 port 0xf7dfe680 irq 43
pata_acpi 0000:00:14.1: >setting latency timer to 64
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: >EHCI Host Controller
ehci_hcd 0000:00:12.2: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: >debug port 1
ehci_hcd 0000:00:12.2: >irq 17, io mem 0xf7dfe800
ehci_hcd 0000:00:12.2: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb1: >SerialNumber: 0000:00:12.2
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >6 ports detected
ehci_hcd 0000:00:13.2: >EHCI Host Controller
ehci_hcd 0000:00:13.2: >new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: >debug port 1
ehci_hcd 0000:00:13.2: >irq 19, io mem 0xf7dfec00
ehci_hcd 0000:00:13.2: >USB 2.0 started, EHCI 1.00
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: EHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb2: >SerialNumber: 0000:00:13.2
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: >OHCI Host Controller
ohci_hcd 0000:00:12.0: >new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: >irq 16, io mem 0xf7df6000
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: OHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb3: >SerialNumber: 0000:00:12.0
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >3 ports detected
ohci_hcd 0000:00:12.1: >OHCI Host Controller
ohci_hcd 0000:00:12.1: >new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: >irq 16, io mem 0xf7df7000
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: OHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb4: >SerialNumber: 0000:00:12.1
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >3 ports detected
ohci_hcd 0000:00:13.0: >OHCI Host Controller
ohci_hcd 0000:00:13.0: >new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: >irq 18, io mem 0xf7dfc000
usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: >Product: OHCI Host Controller
usb usb5: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb5: >SerialNumber: 0000:00:13.0
hub 5-0:1.0: >USB hub found
hub 5-0:1.0: >3 ports detected
ohci_hcd 0000:00:13.1: >OHCI Host Controller
ohci_hcd 0000:00:13.1: >new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: >irq 18, io mem 0xf7dfd000
usb usb6: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: >Product: OHCI Host Controller
usb usb6: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb6: >SerialNumber: 0000:00:13.1
hub 6-0:1.0: >USB hub found
hub 6-0:1.0: >3 ports detected
ohci_hcd 0000:00:14.5: >OHCI Host Controller
ohci_hcd 0000:00:14.5: >new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: >irq 18, io mem 0xf7dff000
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usb usb7: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: >Product: OHCI Host Controller
usb usb7: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
usb usb7: >SerialNumber: 0000:00:14.5
hub 7-0:1.0: >USB hub found
hub 7-0:1.0: >2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: >RTC can wake from S4
rtc_cmos 00:02: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 1:894:604
rtc_cmos 00:02: >setting system clock to 2013-02-06 23:33:10 UTC (1360193590)
powernow-k8: Found 1 AMD Phenom(tm) II X4 965 Processor (4 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (3400 MHz)
powernow-k8: 1 : pstate 1 (2700 MHz)
powernow-k8: 2 : pstate 2 (2200 MHz)
powernow-k8: 3 : pstate 3 (800 MHz)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 928k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1472k freed
Freeing unused kernel memory: 1124k freed
udevd[106]: starting version 175
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: >irq 44 for MSI/MSI-X
r8169 0000:03:00.0: >eth0: RTL8168b/8111b at 0xffffc9000060e000, 48:5b:39:19:80:a1, XID 18000000 IRQ 44
r8169 0000:03:00.0: >eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
scsi4 : pata_atiixp
scsi5 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
firewire_ohci 0000:02:00.0: >added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
ata5.01: HPA detected: current 66055248, native 488397168
ata5.01: ATA-7: SAMSUNG SP2514N, VF100-50, max UDMA/100
ata5.01: 66055248 sectors, multi 16: LBA48
ata6.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata6.00: configured for UDMA/100
ata5.01: configured for UDMA/100
scsi 4:0:1:0: >Direct-Access ATA SAMSUNG SP2514N VF10 PQ: 0 ANSI: 5
sd 4:0:1:0: >[sda] 66055248 512-byte logical blocks: (33.8 GB/31.4 GiB)
sd 4:0:1:0: >Attached scsi generic sg0 type 0
sd 4:0:1:0: >[sda] Write Protect is off
sd 4:0:1:0: >[sda] Mode Sense: 00 3a 00 00
sd 4:0:1:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 4:0:1:0: >[sda] Attached SCSI disk
scsi 5:0:0:0: >Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
sd 5:0:0:0: >[sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 5:0:0:0: >Attached scsi generic sg1 type 0
sd 5:0:0:0: >[sdb] Write Protect is off
sd 5:0:0:0: >[sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: >[sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 3-1: >new low-speed USB device number 2 using ohci_hcd
sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 >
sd 5:0:0:0: >[sdb] Attached SCSI disk
usb 3-1: >New USB device found, idVendor=093a, idProduct=2510
usb 3-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: >Product: USB Optical Mouse
usb 3-1: >Manufacturer: PixArt
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input2
hid-generic 0003:093A:2510.0001: >input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:12.0-1/input0
Refined TSC clocksource calibration: 3411.622 MHz.
Switching to clocksource tsc
firewire_core 0000:02:00.0: created device fw0: GUID 001e8c0000d16893, S400
usb 3-2: >new low-speed USB device number 3 using ohci_hcd
usb 3-2: >New USB device found, idVendor=04f3, idProduct=0103
usb 3-2: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 04f3:0103 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input3
hid-generic 0003:04F3:0103.0002: >input,hidraw1: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:12.0-2/input0
input: HID 04f3:0103 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/input/input4
hid-generic 0003:04F3:0103.0003: >input,hidraw2: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:12.0-2/input1
EXT4-fs (sdb8): INFO: recovery required on readonly filesystem
EXT4-fs (sdb8): write access will be enabled during recovery
EXT4-fs (sdb8): recovery complete
EXT4-fs (sdb8): mounted filesystem with ordered data mode. Opts: (null)
Adding 2097148k swap on /dev/sdb3. Priority:-1 extents:1 across:2097148k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[361]: starting version 175
lp: driver loaded but no devices found
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
[drm] nouveau 0000:04:00.0: Detected an NVc0 generation card (0x0c4180a1)
[drm] nouveau 0000:04:00.0: Checking PRAMIN for VBIOS
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 2.1.0
AMD64 EDAC driver v3.4.0
microcode: CPU0: patch_level=0x010000b6
microcode: failed to load file amd-ucode/microcode_amd.bin
microcode: CPU1: patch_level=0x010000b6
microcode: failed to load file amd-ucode/microcode_amd.bin
microcode: CPU2: patch_level=0x010000b6
microcode: failed to load file amd-ucode/microcode_amd.bin
microcode: CPU3: patch_level=0x010000b6
microcode: failed to load file amd-ucode/microcode_amd.bin
microcode: Microcode Update Driver: v2.00 , Peter Oruba
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
[drm] nouveau 0000:04:00.0: ... appears to be valid
[drm] nouveau 0000:04:00.0: Using VBIOS from PRAMIN
[drm] nouveau 0000:04:00.0: BIT BIOS found
[drm] nouveau 0000:04:00.0: Bios version 70.04.29.00
[drm] nouveau 0000:04:00.0: TMDS table version 2.0
[drm] nouveau 0000:04:00.0: MXM: no VBIOS data, nothing to do
[drm] nouveau 0000:04:00.0: DCB version 4.0
[drm] nouveau 0000:04:00.0: DCB outp 00: 02000300 00000000
[drm] nouveau 0000:04:00.0: DCB outp 01: 01000302 00020030
[drm] nouveau 0000:04:00.0: DCB outp 02: 04011380 00000000
[drm] nouveau 0000:04:00.0: DCB outp 03: 08011382 00020030
[drm] nouveau 0000:04:00.0: DCB outp 04: 02022362 00020010
[drm] nouveau 0000:04:00.0: DCB conn 00: 00001030
[drm] nouveau 0000:04:00.0: DCB conn 01: 00010130
[drm] nouveau 0000:04:00.0: DCB conn 02: 00002261
[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 0 at offset 0x6C54
[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 1 at offset 0x7325
[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 2 at offset 0x85A5
[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 3 at offset 0x85AF
[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 4 at offset 0x878E
[drm] nouveau 0000:04:00.0: Parsing VBIOS init table at offset 0x87F3
[drm] nouveau 0000:04:00.0: 0x87F3: Condition still not met after 20ms, skipping following opcodes
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120320/utaddress-251)
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SMRG 2 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[TTM] Zone kernel: Available graphics memory: 2024106 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] nouveau 0000:04:00.0: Detected 1024MiB VRAM (GDDR5)
[drm] nouveau 0000:04:00.0: 512 MiB GART (aperture)
sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
sp5100_tco: mmio address 0xfec000f0 already in use
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] nouveau 0000:04:00.0: 3 available performance level(s)
[drm] nouveau 0000:04:00.0: 0: core 50MHz shader 101MHz memory 135MHz voltage 875mV
[drm] nouveau 0000:04:00.0: 1: core 405MHz shader 810MHz memory 324MHz voltage 887mV
[drm] nouveau 0000:04:00.0: 3: core 648MHz shader 1296MHz memory 1700MHz voltage 950mV-1050mV
[drm] nouveau 0000:04:00.0: c: core 50MHz shader 101MHz memory 135MHz voltage 875mV fanspeed 40%
[drm] nouveau 0000:04:00.0: MM: using COPY1 for buffer copies
EXT4-fs (sdb8): re-mounted. Opts: errors=remount-ro
[drm] nouveau 0000:04:00.0: allocated 1920x1080 fb: 0x140000, bo ffff88011b1ec000
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
fbcon: nouveaufb (fb0) is primary device
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
Console: switching to colour frame buffer device 240x67
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 1.0.0 20120316 for 0000:04:00.0 on minor 0
hda_intel: Disabling MSI
hda-intel: 0000:04:00.1: Handle VGA-switcheroo audio client
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
init: failsafe main process (667) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ppdev: user-space parallel port driver
r8169 0000:03:00.0: >eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:04:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:04:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:04:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:04:00.1/sound/card1/input16
r8169 0000:03:00.0: >eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[drm] nouveau 0000:04:00.0: 906e not supported yet
init: plymouth-stop pre-start process (1382) terminated with status 1
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
[drm] nouveau 0000:04:00.0: PMFB0_SUBP0: 0x037f0040
[drm] nouveau 0000:04:00.0: PMFB0_SUBP1: 0x037f0000
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0