dmesg - Test1_OSSdriver
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000de19efff] usable
BIOS-e820: [mem 0x00000000de19f000-0x00000000de3b1fff] reserved
BIOS-e820: [mem 0x00000000de3b2000-0x00000000de7effff] ACPI NVS
BIOS-e820: [mem 0x00000000de7f0000-0x00000000dedeafff] reserved
BIOS-e820: [mem 0x00000000dedeb000-0x00000000dedebfff] usable
BIOS-e820: [mem 0x00000000dedec000-0x00000000dee2efff] ACPI NVS
BIOS-e820: [mem 0x00000000dee2f000-0x00000000df5d6fff] usable
BIOS-e820: [mem 0x00000000df5d7000-0x00000000df7f1fff] reserved
BIOS-e820: [mem 0x00000000df7f2000-0x00000000df7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0xde7e2000 ACPI 2.0=0xde7e2000 SMBIOS=0xf04c0 MPS=0xfd820
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000005d000) (0MB)
efi: mem02: type=4, attr=0xf, range=[0x000000000005d000-0x0000000000060000) (0MB)
efi: mem03: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
efi: mem04: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
efi: mem05: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
efi: mem06: type=2, attr=0xf, range=[0x0000000001000000-0x000000000244f000) (20MB)
efi: mem07: type=7, attr=0xf, range=[0x000000000244f000-0x00000000362e2000) (830MB)
efi: mem08: type=2, attr=0xf, range=[0x00000000362e2000-0x0000000037169000) (14MB)
efi: mem09: type=7, attr=0xf, range=[0x0000000037169000-0x000000009a85b000) (1590MB)
efi: mem10: type=2, attr=0xf, range=[0x000000009a85b000-0x00000000cf149000) (840MB)
efi: mem11: type=7, attr=0xf, range=[0x00000000cf149000-0x00000000cf14f000) (0MB)
efi: mem12: type=1, attr=0xf, range=[0x00000000cf14f000-0x00000000cf16d000) (0MB)
efi: mem13: type=7, attr=0xf, range=[0x00000000cf16d000-0x00000000d167d000) (37MB)
efi: mem14: type=4, attr=0xf, range=[0x00000000d167d000-0x00000000d19e5000) (3MB)
efi: mem15: type=7, attr=0xf, range=[0x00000000d19e5000-0x00000000d1a08000) (0MB)
efi: mem16: type=4, attr=0xf, range=[0x00000000d1a08000-0x00000000d1baf000) (1MB)
efi: mem17: type=7, attr=0xf, range=[0x00000000d1baf000-0x00000000d1bb6000) (0MB)
efi: mem18: type=4, attr=0xf, range=[0x00000000d1bb6000-0x00000000d1bb9000) (0MB)
efi: mem19: type=7, attr=0xf, range=[0x00000000d1bb9000-0x00000000d1bc2000) (0MB)
efi: mem20: type=4, attr=0xf, range=[0x00000000d1bc2000-0x00000000d1bc3000) (0MB)
efi: mem21: type=7, attr=0xf, range=[0x00000000d1bc3000-0x00000000d1bcb000) (0MB)
efi: mem22: type=4, attr=0xf, range=[0x00000000d1bcb000-0x00000000d1bcd000) (0MB)
efi: mem23: type=7, attr=0xf, range=[0x00000000d1bcd000-0x00000000d1be2000) (0MB)
efi: mem24: type=4, attr=0xf, range=[0x00000000d1be2000-0x00000000d1be8000) (0MB)
efi: mem25: type=7, attr=0xf, range=[0x00000000d1be8000-0x00000000d1c1a000) (0MB)
efi: mem26: type=4, attr=0xf, range=[0x00000000d1c1a000-0x00000000d1c44000) (0MB)
efi: mem27: type=7, attr=0xf, range=[0x00000000d1c44000-0x00000000d1c45000) (0MB)
efi: mem28: type=4, attr=0xf, range=[0x00000000d1c45000-0x00000000d1cb9000) (0MB)
efi: mem29: type=7, attr=0xf, range=[0x00000000d1cb9000-0x00000000d1cdd000) (0MB)
efi: mem30: type=4, attr=0xf, range=[0x00000000d1cdd000-0x00000000d1d6b000) (0MB)
efi: mem31: type=7, attr=0xf, range=[0x00000000d1d6b000-0x00000000d1d73000) (0MB)
efi: mem32: type=4, attr=0xf, range=[0x00000000d1d73000-0x00000000d1d74000) (0MB)
efi: mem33: type=7, attr=0xf, range=[0x00000000d1d74000-0x00000000d1d91000) (0MB)
efi: mem34: type=4, attr=0xf, range=[0x00000000d1d91000-0x00000000d1d97000) (0MB)
efi: mem35: type=7, attr=0xf, range=[0x00000000d1d97000-0x00000000d1d9e000) (0MB)
efi: mem36: type=4, attr=0xf, range=[0x00000000d1d9e000-0x00000000d1d9f000) (0MB)
efi: mem37: type=7, attr=0xf, range=[0x00000000d1d9f000-0x00000000d1df1000) (0MB)
efi: mem38: type=4, attr=0xf, range=[0x00000000d1df1000-0x00000000d1df2000) (0MB)
efi: mem39: type=7, attr=0xf, range=[0x00000000d1df2000-0x00000000d1df4000) (0MB)
efi: mem40: type=4, attr=0xf, range=[0x00000000d1df4000-0x00000000d1df5000) (0MB)
efi: mem41: type=7, attr=0xf, range=[0x00000000d1df5000-0x00000000d1e07000) (0MB)
efi: mem42: type=4, attr=0xf, range=[0x00000000d1e07000-0x00000000d1e08000) (0MB)
efi: mem43: type=7, attr=0xf, range=[0x00000000d1e08000-0x00000000d1e1d000) (0MB)
efi: mem44: type=4, attr=0xf, range=[0x00000000d1e1d000-0x00000000d1e23000) (0MB)
efi: mem45: type=7, attr=0xf, range=[0x00000000d1e23000-0x00000000d1e56000) (0MB)
efi: mem46: type=4, attr=0xf, range=[0x00000000d1e56000-0x00000000d1e7b000) (0MB)
efi: mem47: type=7, attr=0xf, range=[0x00000000d1e7b000-0x00000000d1e7c000) (0MB)
efi: mem48: type=4, attr=0xf, range=[0x00000000d1e7c000-0x00000000d1e7d000) (0MB)
efi: mem49: type=7, attr=0xf, range=[0x00000000d1e7d000-0x00000000d1e7f000) (0MB)
efi: mem50: type=4, attr=0xf, range=[0x00000000d1e7f000-0x00000000d1e80000) (0MB)
efi: mem51: type=7, attr=0xf, range=[0x00000000d1e80000-0x00000000d1ea7000) (0MB)
efi: mem52: type=4, attr=0xf, range=[0x00000000d1ea7000-0x00000000d1ead000) (0MB)
efi: mem53: type=7, attr=0xf, range=[0x00000000d1ead000-0x00000000d1f09000) (0MB)
efi: mem54: type=4, attr=0xf, range=[0x00000000d1f09000-0x00000000d1f0a000) (0MB)
efi: mem55: type=7, attr=0xf, range=[0x00000000d1f0a000-0x00000000d1f34000) (0MB)
efi: mem56: type=4, attr=0xf, range=[0x00000000d1f34000-0x00000000d1f3a000) (0MB)
efi: mem57: type=7, attr=0xf, range=[0x00000000d1f3a000-0x00000000d1fc7000) (0MB)
efi: mem58: type=4, attr=0xf, range=[0x00000000d1fc7000-0x00000000d22df000) (3MB)
efi: mem59: type=7, attr=0xf, range=[0x00000000d22df000-0x00000000d22fc000) (0MB)
efi: mem60: type=4, attr=0xf, range=[0x00000000d22fc000-0x00000000d22fe000) (0MB)
efi: mem61: type=7, attr=0xf, range=[0x00000000d22fe000-0x00000000d2326000) (0MB)
efi: mem62: type=4, attr=0xf, range=[0x00000000d2326000-0x00000000d232c000) (0MB)
efi: mem63: type=7, attr=0xf, range=[0x00000000d232c000-0x00000000d236d000) (0MB)
efi: mem64: type=4, attr=0xf, range=[0x00000000d236d000-0x00000000d23c7000) (0MB)
efi: mem65: type=7, attr=0xf, range=[0x00000000d23c7000-0x00000000d23fd000) (0MB)
efi: mem66: type=4, attr=0xf, range=[0x00000000d23fd000-0x00000000d2403000) (0MB)
efi: mem67: type=7, attr=0xf, range=[0x00000000d2403000-0x00000000d2404000) (0MB)
efi: mem68: type=4, attr=0xf, range=[0x00000000d2404000-0x00000000d2405000) (0MB)
efi: mem69: type=7, attr=0xf, range=[0x00000000d2405000-0x00000000d2406000) (0MB)
efi: mem70: type=4, attr=0xf, range=[0x00000000d2406000-0x00000000d2409000) (0MB)
efi: mem71: type=7, attr=0xf, range=[0x00000000d2409000-0x00000000d240a000) (0MB)
efi: mem72: type=4, attr=0xf, range=[0x00000000d240a000-0x00000000d246d000) (0MB)
efi: mem73: type=7, attr=0xf, range=[0x00000000d246d000-0x00000000d275f000) (2MB)
efi: mem74: type=4, attr=0xf, range=[0x00000000d275f000-0x00000000d2768000) (0MB)
efi: mem75: type=7, attr=0xf, range=[0x00000000d2768000-0x00000000d276e000) (0MB)
efi: mem76: type=4, attr=0xf, range=[0x00000000d276e000-0x00000000dbefd000) (151MB)
efi: mem77: type=7, attr=0xf, range=[0x00000000dbefd000-0x00000000dbeff000) (0MB)
efi: mem78: type=4, attr=0xf, range=[0x00000000dbeff000-0x00000000dbf41000) (0MB)
efi: mem79: type=7, attr=0xf, range=[0x00000000dbf41000-0x00000000dbf43000) (0MB)
efi: mem80: type=4, attr=0xf, range=[0x00000000dbf43000-0x00000000dbf50000) (0MB)
efi: mem81: type=7, attr=0xf, range=[0x00000000dbf50000-0x00000000dbf51000) (0MB)
efi: mem82: type=4, attr=0xf, range=[0x00000000dbf51000-0x00000000dc103000) (1MB)
efi: mem83: type=7, attr=0xf, range=[0x00000000dc103000-0x00000000dc104000) (0MB)
efi: mem84: type=4, attr=0xf, range=[0x00000000dc104000-0x00000000dd5c6000) (20MB)
efi: mem85: type=7, attr=0xf, range=[0x00000000dd5c6000-0x00000000ddea0000) (8MB)
efi: mem86: type=2, attr=0xf, range=[0x00000000ddea0000-0x00000000ddeac000) (0MB)
efi: mem87: type=3, attr=0xf, range=[0x00000000ddeac000-0x00000000de19f000) (2MB)
efi: mem88: type=0, attr=0xf, range=[0x00000000de19f000-0x00000000de203000) (0MB)
efi: mem89: type=0, attr=0xf, range=[0x00000000de203000-0x00000000de347000) (1MB)
efi: mem90: type=0, attr=0xf, range=[0x00000000de347000-0x00000000de34d000) (0MB)
efi: mem91: type=0, attr=0xf, range=[0x00000000de34d000-0x00000000de3b2000) (0MB)
efi: mem92: type=10, attr=0xf, range=[0x00000000de3b2000-0x00000000de4ce000) (1MB)
efi: mem93: type=10, attr=0xf, range=[0x00000000de4ce000-0x00000000de7f0000) (3MB)
efi: mem94: type=6, attr=0x800000000000000f, range=[0x00000000de7f0000-0x00000000deb1e000) (3MB)
efi: mem95: type=6, attr=0x800000000000000f, range=[0x00000000deb1e000-0x00000000decb4000) (1MB)
efi: mem96: type=6, attr=0x800000000000000f, range=[0x00000000decb4000-0x00000000decb6000) (0MB)
efi: mem97: type=6, attr=0x800000000000000f, range=[0x00000000decb6000-0x00000000ded54000) (0MB)
efi: mem98: type=5, attr=0x800000000000000f, range=[0x00000000ded54000-0x00000000ded72000) (0MB)
efi: mem99: type=5, attr=0x800000000000000f, range=[0x00000000ded72000-0x00000000dedeb000) (0MB)
efi: mem100: type=4, attr=0xf, range=[0x00000000dedeb000-0x00000000dedec000) (0MB)
efi: mem101: type=10, attr=0xf, range=[0x00000000dedec000-0x00000000dee2f000) (0MB)
efi: mem102: type=4, attr=0xf, range=[0x00000000dee2f000-0x00000000def7f000) (1MB)
efi: mem103: type=3, attr=0xf, range=[0x00000000def7f000-0x00000000df5ae000) (6MB)
efi: mem104: type=4, attr=0xf, range=[0x00000000df5ae000-0x00000000df5be000) (0MB)
efi: mem105: type=3, attr=0xf, range=[0x00000000df5be000-0x00000000df5d0000) (0MB)
efi: mem106: type=4, attr=0xf, range=[0x00000000df5d0000-0x00000000df5d7000) (0MB)
efi: mem107: type=6, attr=0x800000000000000f, range=[0x00000000df5d7000-0x00000000df7f2000) (2MB)
efi: mem108: type=4, attr=0xf, range=[0x00000000df7f2000-0x00000000df800000) (0MB)
efi: mem109: type=7, attr=0xf, range=[0x0000000100000000-0x000000021f000000) (4592MB)
efi: mem110: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
efi: mem111: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem112: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
efi: mem113: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
efi: mem114: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
efi: mem115: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
DMI 2.7 present.
DMI: Dell Inc. XPS 8500 /0NW73C, BIOS A09 09/05/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FF0000000 write-back
2 base 210000000 mask FF8000000 write-back
3 base 218000000 mask FFC000000 write-back
4 base 21C000000 mask FFE000000 write-back
5 base 21E000000 mask FFF000000 write-back
6 base 0E0000000 mask FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 256MB, type WB
reg 2, base: 8448MB, range: 128MB, type WB
reg 3, base: 8576MB, range: 64MB, type WB
reg 4, base: 8640MB, range: 32MB, type WB
reg 5, base: 8672MB, range: 16MB, type WB
reg 6, base: 3584MB, range: 512MB, type UC
total RAM covered: 8176M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 512MB, type WB
reg 5, base: 8688MB, range: 16MB, type UC
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fdb40-0x000fdb4f] mapped at [ffff8800000fdb40]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0xdf7fffff]
[mem 0x00000000-0xdf7fffff] page 2M
kernel direct mapping tables up to 0xdf7fffff @ [mem 0x1fffb000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x21effffff]
[mem 0x100000000-0x21effffff] page 2M
kernel direct mapping tables up to 0x21effffff @ [mem 0xddea2000-0xddeabfff]
RAMDISK: [mem 0x362e2000-0x37168fff]
ACPI: RSDP 00000000de7e2000 00024 (v02 DELL )
ACPI: XSDT 00000000de7e2080 00084 (v01 DELL FX09 20100118 AMI 00000097)
ACPI: FACP 00000000de7eaa40 0010C (v05 DELL FX09 20100118 AMI 00000097)
ACPI: DSDT 00000000de7e21a0 0889A (v02 DELL FX09 00000000 INTL 20051117)
ACPI: FACS 00000000de7ee080 00040
ACPI: APIC 00000000de7eab50 00092 (v03 DELL FX09 20100118 AMI 00000097)
ACPI: FPDT 00000000de7eabe8 00044 (v01 DELL FX09 20100118 AMI 00000097)
ACPI: MCFG 00000000de7eac30 0003C (v01 DELL FX09 20100118 MSFT 00000097)
ACPI: SLIC 00000000de7eac70 00176 (v01 DELL FX09 20100118 MSFT 00000097)
ACPI: HPET 00000000de7eade8 00038 (v01 DELL FX09 20100118 AMI. 00000005)
ACPI: SSDT 00000000de7eae20 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: MSDM 00000000de7eb190 00055 (v03 DELL FX09 20100118 AMI 00000097)
ACPI: SSDT 00000000de7eb1e8 009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000de7ebb98 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: DMAR 00000000de7ec630 00080 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: BGRT 00000000de7ec6b0 00038 (v00 DELL FX09 20100118 AMI 00000097)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021effffff]
Initmem setup node 0 [mem 0x00000000-0x21effffff]
NODE_DATA [mem 0x21effc000-0x21effffff]
[ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216600000-ffff88021e5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x21effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0xde19efff]
node 0: [mem 0xdedeb000-0xdedebfff]
node 0: [mem 0xdee2f000-0xdf5d6fff]
node 0: [mem 0xdf7f2000-0xdf7fffff]
node 0: [mem 0x100000000-0x21effffff]
On node 0 totalpages: 2087141
DMA zone: 64 pages used for memmap
DMA zone: 13 pages reserved
DMA zone: 3906 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 891286 pages, LIFO batch:31
Normal zone: 18368 pages used for memmap
Normal zone: 1157184 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 00000000de19f000 - 00000000de3b2000
PM: Registered nosave memory: 00000000de3b2000 - 00000000de7f0000
PM: Registered nosave memory: 00000000de7f0000 - 00000000dedeb000
PM: Registered nosave memory: 00000000dedec000 - 00000000dee2f000
PM: Registered nosave memory: 00000000df5d7000 - 00000000df7f2000
PM: Registered nosave memory: 00000000df800000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88021ec00000 s83584 r8192 d22912 u262144
pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2052376
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7919608k/8896512k available (6711k kernel code, 547948k absent, 428956k reserved, 6459k data, 928k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:744 16
Extended CMOS year: 2000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3392.353 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.70 BogoMIPS (lpj=13569412)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 25118 entries in 99 pages
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
DMAR: RMRR base: 0x000000de326000 end: 0x000000de345fff
IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
HPET id 0 under DRHD base 0xfed90000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz stepping 09
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (54277.64 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xde3b2000-0xde7effff] (4448256 bytes)
PM: Registering ACPI NVS region [mem 0xdedec000-0xdee2efff] (274432 bytes)
dummy:
RTC time: 11:41:47, date: 02/05/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000de35f018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000de360a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000de361c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: >host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: >host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: >host bridge window [mem 0xe0000000-0xfeafffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: >root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: >root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: >root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: >root bus resource [mem 0xe0000000-0xfeafffff]
pci 0000:00:00.0: >[8086:0150] type 00 class 0x060000
pci 0000:00:01.0: >[8086:0151] type 01 class 0x060400
pci 0000:00:01.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: >[8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: >reg 10: [mem 0xf7f00000-0xf7f0ffff 64bit]
pci 0000:00:14.0: >PME# supported from D3hot D3cold
pci 0000:00:16.0: >[8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: >reg 10: [mem 0xf7f1a000-0xf7f1a00f 64bit]
pci 0000:00:16.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: >[8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: >reg 10: [mem 0xf7f18000-0xf7f183ff]
pci 0000:00:1a.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: >[8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: >reg 10: [mem 0xf7f10000-0xf7f13fff 64bit]
pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: >[8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: >[8086:1e16] type 01 class 0x060400
pci 0000:00:1c.3: >PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: >[8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: >reg 10: [mem 0xf7f17000-0xf7f173ff]
pci 0000:00:1d.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: >[8086:1e4a] type 00 class 0x060100
pci 0000:00:1f.2: >[8086:1e02] type 00 class 0x010601
pci 0000:00:1f.2: >reg 10: [io 0xf070-0xf077]
pci 0000:00:1f.2: >reg 14: [io 0xf060-0xf063]
pci 0000:00:1f.2: >reg 18: [io 0xf050-0xf057]
pci 0000:00:1f.2: >reg 1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: >reg 20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: >reg 24: [mem 0xf7f16000-0xf7f167ff]
pci 0000:00:1f.2: >PME# supported from D3hot
pci 0000:00:1f.3: >[8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: >reg 10: [mem 0xf7f15000-0xf7f150ff 64bit]
pci 0000:00:1f.3: >reg 20: [io 0xf000-0xf01f]
pci 0000:01:00.0: >[1002:675d] type 00 class 0x030000
pci 0000:01:00.0: >reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: >reg 18: [mem 0xf7e20000-0xf7e3ffff 64bit]
pci 0000:01:00.0: >reg 20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: >reg 30: [mem 0xf7e00000-0xf7e1ffff pref]
pci 0000:01:00.0: >supports D1 D2
pci 0000:01:00.1: >[1002:aa90] type 00 class 0x040300
pci 0000:01:00.1: >reg 10: [mem 0xf7e40000-0xf7e43fff 64bit]
pci 0000:01:00.1: >supports D1 D2
pci 0000:00:01.0: >PCI bridge to [bus 01-01]
pci 0000:00:01.0: > bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: > bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:01.0: > bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: >[168c:0032] type 00 class 0x028000
pci 0000:02:00.0: >reg 10: [mem 0xf7d00000-0xf7d7ffff 64bit]
pci 0000:02:00.0: >reg 30: [mem 0xf7d80000-0xf7d8ffff pref]
pci 0000:02:00.0: >supports D1 D2
pci 0000:02:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
pci 0000:00:1c.0: > bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:03:00.0: >[10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: >reg 10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: >reg 18: [mem 0xf0004000-0xf0004fff 64bit pref]
pci 0000:03:00.0: >reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:03:00.0: >supports D1 D2
pci 0000:03:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: >PCI bridge to [bus 03-03]
pci 0000:00:1c.3: > bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: > bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
pci0000:00: >Requesting ACPI _OSC control (0x1d)
pci0000:00: >ACPI _OSC control (0x18) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xde19f000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdedec000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf5d7000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-3e]
pnp 00:00: >[io 0x0000-0x0cf7 window]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000c0000-0x000c3fff window]
pnp 00:00: >[mem 0x000c4000-0x000c7fff window]
pnp 00:00: >[mem 0x000c8000-0x000cbfff window]
pnp 00:00: >[mem 0x000cc000-0x000cffff window]
pnp 00:00: >[mem 0x000d0000-0x000d3fff window]
pnp 00:00: >[mem 0x000d4000-0x000d7fff window]
pnp 00:00: >[mem 0x000d8000-0x000dbfff window]
pnp 00:00: >[mem 0x000dc000-0x000dffff window]
pnp 00:00: >[mem 0x000e0000-0x000e3fff window]
pnp 00:00: >[mem 0x000e4000-0x000e7fff window]
pnp 00:00: >[mem 0x000e8000-0x000ebfff window]
pnp 00:00: >[mem 0x000ec000-0x000effff window]
pnp 00:00: >[mem 0x000f0000-0x000fffff window]
pnp 00:00: >[mem 0xe0000000-0xfeafffff window]
pnp 00:00: >[mem 0x00010000-0x0001ffff window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: >[mem 0xfed40000-0xfed44fff]
system 00:01: >[mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: >[io 0x0000-0x001f]
pnp 00:02: >[io 0x0081-0x0091]
pnp 00:02: >[io 0x0093-0x009f]
pnp 00:02: >[io 0x00c0-0x00df]
pnp 00:02: >[dma 4]
pnp 00:02: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: >[mem 0xff000000-0xffffffff]
pnp 00:03: >Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:04: >[mem 0xfed00000-0xfed003ff]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: >[io 0x002e-0x002f]
pnp 00:05: >[io 0x004e-0x004f]
pnp 00:05: >[io 0x0061]
pnp 00:05: >[io 0x0063]
pnp 00:05: >[io 0x0065]
pnp 00:05: >[io 0x0067]
pnp 00:05: >[io 0x0070]
pnp 00:05: >[io 0x0080]
pnp 00:05: >[io 0x0092]
pnp 00:05: >[io 0x00b2-0x00b3]
pnp 00:05: >[io 0x0680-0x069f]
pnp 00:05: >[io 0x1000-0x100f]
pnp 00:05: >[io 0xffff]
pnp 00:05: >[io 0xffff]
pnp 00:05: >[io 0x0400-0x0453]
pnp 00:05: >[io 0x0458-0x047f]
pnp 00:05: >[io 0x0500-0x057f]
pnp 00:05: >[io 0x164e-0x164f]
system 00:05: >[io 0x0680-0x069f] has been reserved
system 00:05: >[io 0x1000-0x100f] has been reserved
system 00:05: >[io 0xffff] has been reserved
system 00:05: >[io 0xffff] has been reserved
system 00:05: >[io 0x0400-0x0453] has been reserved
system 00:05: >[io 0x0458-0x047f] has been reserved
system 00:05: >[io 0x0500-0x057f] has been reserved
system 00:05: >[io 0x164e-0x164f] has been reserved
system 00:05: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: >[io 0x0070-0x0077]
pnp 00:06: >[irq 8]
pnp 00:06: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: >[io 0x0454-0x0457]
system 00:07: >[io 0x0454-0x0457] has been reserved
system 00:07: >Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:08: >[io 0x0000-0xffffffffffffffff disabled]
pnp 00:08: >[io 0x0a00-0x0a1f]
pnp 00:08: >[io 0x0a20-0x0a2f]
pnp 00:08: >[io 0x0a30-0x0a3f]
system 00:08: >[io 0x0a00-0x0a1f] has been reserved
system 00:08: >[io 0x0a20-0x0a2f] has been reserved
system 00:08: >[io 0x0a30-0x0a3f] has been reserved
system 00:08: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: >[io 0x0010-0x001f]
pnp 00:09: >[io 0x0022-0x003f]
pnp 00:09: >[io 0x0044-0x005f]
pnp 00:09: >[io 0x0062-0x0063]
pnp 00:09: >[io 0x0065-0x006f]
pnp 00:09: >[io 0x0072-0x007f]
pnp 00:09: >[io 0x0080]
pnp 00:09: >[io 0x0084-0x0086]
pnp 00:09: >[io 0x0088]
pnp 00:09: >[io 0x008c-0x008e]
pnp 00:09: >[io 0x0090-0x009f]
pnp 00:09: >[io 0x00a2-0x00bf]
pnp 00:09: >[io 0x00e0-0x00ef]
pnp 00:09: >[io 0x04d0-0x04d1]
system 00:09: >[io 0x04d0-0x04d1] has been reserved
system 00:09: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: >[io 0x00f0-0x00ff]
pnp 00:0a: >[irq 13]
pnp 00:0a: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0b: >[mem 0xfed1c000-0xfed1ffff]
pnp 00:0b: >[mem 0xfed10000-0xfed17fff]
pnp 00:0b: >[mem 0xfed18000-0xfed18fff]
pnp 00:0b: >[mem 0xfed19000-0xfed19fff]
pnp 00:0b: >[mem 0xf8000000-0xfbffffff]
pnp 00:0b: >[mem 0xfed20000-0xfed3ffff]
pnp 00:0b: >[mem 0xfed90000-0xfed93fff]
pnp 00:0b: >[mem 0xfed45000-0xfed8ffff]
pnp 00:0b: >[mem 0xff000000-0xffffffff]
pnp 00:0b: >[mem 0xfee00000-0xfeefffff]
pnp 00:0b: >[mem 0xf0100000-0xf0100fff]
system 00:0b: >[mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: >[mem 0xfed10000-0xfed17fff] has been reserved
system 00:0b: >[mem 0xfed18000-0xfed18fff] has been reserved
system 00:0b: >[mem 0xfed19000-0xfed19fff] has been reserved
system 00:0b: >[mem 0xf8000000-0xfbffffff] has been reserved
system 00:0b: >[mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0b: >[mem 0xfed90000-0xfed93fff] has been reserved
system 00:0b: >[mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0b: >[mem 0xff000000-0xffffffff] has been reserved
system 00:0b: >[mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0b: >[mem 0xf0100000-0xf0100fff] has been reserved
system 00:0b: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:01.0: >PCI bridge to [bus 01-01]
pci 0000:00:01.0: > bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: > bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:01.0: > bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
pci 0000:00:1c.0: > bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.3: >PCI bridge to [bus 03-03]
pci 0000:00:1c.3: > bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: > bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: >resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: >resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: >resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: >resource 11 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: >resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: >resource 1 [mem 0xf7e00000-0xf7efffff]
pci_bus 0000:01: >resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: >resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:03: >resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: >resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
Freeing initrd memory: 14876k freed
pci 0000:01:00.0: >Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcd67d000-0xd167cfff] (64MB) mapped at [ffff8800cd67d000-ffff8800d167cfff]
audit: initializing netlink socket (disabled)
type=2000 audit(1360064506.344:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 15888
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: >irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, mapped to 0xffffc9000a900000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: >registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: >registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: >version 3.0
ahci 0000:00:1f.2: >irq 42 for MSI/MSI-X
ahci 0000:00:1f.2: >AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x2f impl SATA mode
ahci 0000:00:1f.2: >flags: 64bit ncq pm led clo pio slum part ems apst
ahci 0000:00:1f.2: >setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16180 irq 42
ata3: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16200 irq 42
ata4: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16280 irq 42
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16380 irq 42
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: >setting latency timer to 64
ehci_hcd 0000:00:1a.0: >EHCI Host Controller
ehci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: >debug port 2
ehci_hcd 0000:00:1a.0: >cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: >irq 16, io mem 0xf7f18000
ehci_hcd 0000:00:1a.0: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb1: >SerialNumber: 0000:00:1a.0
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >2 ports detected
ehci_hcd 0000:00:1d.0: >setting latency timer to 64
ehci_hcd 0000:00:1d.0: >EHCI Host Controller
ehci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: >debug port 2
ehci_hcd 0000:00:1d.0: >cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: >irq 23, io mem 0xf7f17000
ehci_hcd 0000:00:1d.0: >USB 2.0 started, EHCI 1.00
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: EHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb2: >SerialNumber: 0000:00:1d.0
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: >setting latency timer to 64
xhci_hcd 0000:00:14.0: >xHCI Host Controller
xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: >cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: >irq 16, io mem 0xf7f00000
xhci_hcd 0000:00:14.0: >irq 43 for MSI/MSI-X
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: xHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb3: >SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >4 ports detected
xhci_hcd 0000:00:14.0: >xHCI Host Controller
xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 4
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: xHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb4: >SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >4 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: >RTC can wake from S4
rtc_cmos 00:06: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 1:647:680
rtc_cmos 00:06: >setting system clock to 2013-02-05 11:41:47 UTC (1360064507)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ATA-8: ST2000DM001-1CH164, CC24, max UDMA/133
ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: >Direct-Access ATA ST2000DM001-1CH1 CC24 PQ: 0 ANSI: 5
sd 0:0:0:0: >[sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: >[sda] 4096-byte physical blocks
sd 0:0:0:0: >[sda] Write Protect is off
sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: >Attached scsi generic sg0 type 0
sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: ATAPI: TSSTcorp DVD+/-RW SH-216BB, D100, max UDMA/100
usb 1-1: >new high-speed USB device number 2 using ehci_hcd
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: configured for UDMA/100
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
sd 0:0:0:0: >[sda] Attached SCSI disk
scsi 5:0:0:0: >CD-ROM TSSTcorp DVD+-RW SH-216BB D100 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: >Attached scsi CD-ROM sr0
sr 5:0:0:0: >Attached scsi generic sg1 type 5
Freeing unused kernel memory: 928k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1472k freed
Freeing unused kernel memory: 1124k freed
udevd[129]: starting version 175
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: >irq 44 for MSI/MSI-X
r8169 0000:03:00.0: >eth0: RTL8168evl/8111evl at 0xffffc90004086000, 18:03:73:22:41:22, XID 0c900800 IRQ 44
r8169 0000:03:00.0: >eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usb 1-1: >New USB device found, idVendor=8087, idProduct=0024
usb 1-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: >USB hub found
hub 1-1:1.0: >6 ports detected
usb 2-1: >new high-speed USB device number 2 using ehci_hcd
usb 2-1: >New USB device found, idVendor=8087, idProduct=0024
usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: >USB hub found
hub 2-1:1.0: >8 ports detected
usb 3-4: >new high-speed USB device number 2 using xhci_hcd
usb 3-4: >New USB device found, idVendor=1e4e, idProduct=0102
usb 3-4: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-4: >Product: USB2.0 Camera
usb 3-4: >Manufacturer: Etron Technology, Inc.
Refined TSC clocksource calibration: 3392.295 MHz.
Switching to clocksource tsc
usb 1-1.3: >new low-speed USB device number 3 using ehci_hcd
usb 1-1.3: >New USB device found, idVendor=413c, idProduct=2112
usb 1-1.3: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: >Product: Dell USB Wired Multimedia Keyboard
usb 1-1.3: >Manufacturer: DELL
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: DELL Dell USB Wired Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input2
hid-generic 0003:413C:2112.0001: >input,hidraw0: USB HID v1.10 Keyboard [DELL Dell USB Wired Multimedia Keyboard] on usb-0000:00:1a.0-1.3/input0
input: DELL Dell USB Wired Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/input/input3
hid-generic 0003:413C:2112.0002: >input,hidraw1: USB HID v1.10 Device [DELL Dell USB Wired Multimedia Keyboard] on usb-0000:00:1a.0-1.3/input1
usb 1-1.5: >new full-speed USB device number 4 using ehci_hcd
usb 1-1.5: >New USB device found, idVendor=0cf3, idProduct=e004
usb 1-1.5: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.5: >Product: Bluetooth USB Host Controller
usb 1-1.5: >Manufacturer: Atheros Communications
usb 1-1.5: >SerialNumber: Alaska Day 2006
usb 2-1.5: >new low-speed USB device number 3 using ehci_hcd
usb 2-1.5: >New USB device found, idVendor=046d, idProduct=c063
usb 2-1.5: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.5: >Product: DELL USB Laser Mouse
usb 2-1.5: >Manufacturer: DELL
input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input4
hid-generic 0003:046D:C063.0003: >input,hidraw2: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:1d.0-1.5/input0
usb 2-1.8: >new high-speed USB device number 4 using ehci_hcd
usb 2-1.8: >New USB device found, idVendor=058f, idProduct=6362
usb 2-1.8: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.8: >Product: Mass Storage Device
usb 2-1.8: >Manufacturer: Generic
usb 2-1.8: >SerialNumber: 058F63626476
Initializing USB Mass Storage driver...
scsi6 : usb-storage 2-1.8:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver uas
EXT4-fs (sda7): INFO: recovery required on readonly filesystem
EXT4-fs (sda7): write access will be enabled during recovery
EXT4-fs (sda7): recovery complete
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
scsi 6:0:0:0: >Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
scsi 6:0:0:1: >Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
scsi 6:0:0:2: >Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
scsi 6:0:0:3: >Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: >Attached scsi generic sg2 type 0
sd 6:0:0:1: >Attached scsi generic sg3 type 0
sd 6:0:0:2: >Attached scsi generic sg4 type 0
sd 6:0:0:3: >Attached scsi generic sg5 type 0
sd 6:0:0:0: >[sdb] Attached SCSI removable disk
sd 6:0:0:1: >[sdc] Attached SCSI removable disk
sd 6:0:0:2: >[sdd] Attached SCSI removable disk
sd 6:0:0:3: >[sde] Attached SCSI removable disk
Adding 9000956k swap on /dev/sda8. Priority:-1 extents:1 across:9000956k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[383]: starting version 175
microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x12
mei 0000:00:16.0: >setting latency timer to 64
mei 0000:00:16.0: >irq 45 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
lp: driver loaded but no devices found
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb: conflicting fb hw usage radeondrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (TURKS 0x1002:0x675D 0x1028:0x2B22).
[drm] register mmio base: 0xF7E20000
[drm] register mmio size: 131072
radeon 0000:01:00.0: >Invalid ROM contents
ATOM BIOS: TURKS
radeon 0000:01:00.0: >VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: >GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 4069090 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: >irq 46 for MSI/MSI-X
radeon 0000:01:00.0: >radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading TURKS Microcode
ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
mei 0000:00:16.0: >wd: failed to find the client
cfg80211: Calling CRDA to update world regulatory domain
Linux video capture interface: v2.00
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
uvcvideo: Found UVC 1.00 device USB2.0 Camera (1e4e:0102)
usbcore: registered new interface driver btusb
usbcore: registered new interface driver ath3k
uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
input: USB2.0 Camera as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input5
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
ath9k 0000:02:00.0: >enabling device (0000 -> 0002)
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0
ieee80211 phy0: >Atheros AR9485 Rev:1 mem=0xffffc9000a900000, irq=16
snd_hda_intel 0000:00:1b.0: >enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: >irq 47 for MSI/MSI-X
dcdbas dcdbas: >Dell Systems Management Base Driver (version 5.6.0-3.2)
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x12
microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x12
microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x12
microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x12
microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x12
microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x12
microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x12
microcode: Microcode Update Driver: v2.00 , Peter Oruba
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: >WB enabled
radeon 0000:01:00.0: >fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8801fcf0bc00
[drm] ring test on 0 succeeded in 3 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A-1
[drm] HPD4
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] DVI-I-1
[drm] HPD1
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xE0142000
[drm] vram apper at 0xE0000000
[drm] size 9216000
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x75
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.18.0 20080528 for 0000:01:00.0 on minor 0
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
snd_hda_intel 0000:01:00.1: >enabling device (0000 -> 0002)
hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: >irq 48 for MSI/MSI-X
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
init: failsafe main process (939) killed by TERM signal
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
xhci_hcd 0000:00:14.0: >WARN Event TRB for slot 1 ep 0 with no TDs queued?
ppdev: user-space parallel port driver
type=1400 audit(1360064517.963:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1047 comm="apparmor_parser"
type=1400 audit(1360064517.963:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1048 comm="apparmor_parser"
type=1400 audit(1360064517.963:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1046 comm="apparmor_parser"
type=1400 audit(1360064517.963:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1053 comm="apparmor_parser"
type=1400 audit(1360064517.963:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1047 comm="apparmor_parser"
type=1400 audit(1360064517.963:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=1048 comm="apparmor_parser"
type=1400 audit(1360064517.963:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1046 comm="apparmor_parser"
type=1400 audit(1360064517.963:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1055 comm="apparmor_parser"
type=1400 audit(1360064517.963:10): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1049 comm="apparmor_parser"
type=1400 audit(1360064517.963:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1052 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0: >eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
wlan0: authenticate with 00:11:5c:4d:e6:21
wlan0: send auth to 00:11:5c:4d:e6:21 (try 1/3)
wlan0: send auth to 00:11:5c:4d:e6:21 (try 2/3)
wlan0: authenticated
wlan0: associate with 00:11:5c:4d:e6:21 (try 1/3)
wlan0: RX AssocResp from 00:11:5c:4d:e6:21 (capab=0x421 status=0 aid=203)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
hub 1-1:1.0: >port 3 disabled by hub (EMI?), re-enabling...
usb 1-1.3: >USB disconnect, device number 3
usb 1-1.3: >new low-speed USB device number 5 using ehci_hcd
usb 1-1.3: >New USB device found, idVendor=413c, idProduct=2112
usb 1-1.3: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: >Product: Dell USB Wired Multimedia Keyboard
usb 1-1.3: >Manufacturer: DELL
input: DELL Dell USB Wired Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input16
hid-generic 0003:413C:2112.0004: >input,hidraw0: USB HID v1.10 Keyboard [DELL Dell USB Wired Multimedia Keyboard] on usb-0000:00:1a.0-1.3/input0
input: DELL Dell USB Wired Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/input/input17
hid-generic 0003:413C:2112.0005: >input,hidraw1: USB HID v1.10 Device [DELL Dell USB Wired Multimedia Keyboard] on usb-0000:00:1a.0-1.3/input1
wlan0: deauthenticated from 00:11:5c:4d:e6:21 (Reason: 2)
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:0e:38:b4:7d:a1
wlan0: direct probe to 00:0e:38:b4:7d:a1 (try 1/3)
wlan0: direct probe to 00:0e:38:b4:7d:a1 (try 2/3)
wlan0: direct probe to 00:0e:38:b4:7d:a1 (try 3/3)
wlan0: authentication with 00:0e:38:b4:7d:a1 timed out
wlan0: authenticate with 00:11:5c:4d:ec:c1
wlan0: direct probe to 00:11:5c:4d:ec:c1 (try 1/3)
wlan0: direct probe to 00:11:5c:4d:ec:c1 (try 2/3)
wlan0: direct probe to 00:11:5c:4d:ec:c1 (try 3/3)
wlan0: authentication with 00:11:5c:4d:ec:c1 timed out
wlan0: authenticate with 00:15:2b:61:cc:21
wlan0: send auth to 00:15:2b:61:cc:21 (try 1/3)
wlan0: send auth to 00:15:2b:61:cc:21 (try 2/3)
wlan0: authenticated
wlan0: associate with 00:15:2b:61:cc:21 (try 1/3)
wlan0: RX AssocResp from 00:15:2b:61:cc:21 (capab=0x421 status=0 aid=225)
wlan0: associated
wlan0: deauthenticated from 00:15:2b:61:cc:21 (Reason: 2)
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:15:2b:61:cc:21
wlan0: send auth to 00:15:2b:61:cc:21 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:15:2b:61:cc:21 (try 1/3)
wlan0: RX AssocResp from 00:15:2b:61:cc:21 (capab=0x421 status=0 aid=226)
wlan0: associated
wlan0: deauthenticated from 00:15:2b:61:cc:21 (Reason: 2)
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:0e:38:b4:7d:a1
wlan0: send auth to 00:0e:38:b4:7d:a1 (try 1/3)
wlan0: send auth to 00:0e:38:b4:7d:a1 (try 2/3)
wlan0: send auth to 00:0e:38:b4:7d:a1 (try 3/3)
wlan0: authentication with 00:0e:38:b4:7d:a1 timed out
wlan0: authenticate with 00:11:5c:4d:e6:21
wlan0: send auth to 00:11:5c:4d:e6:21 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:11:5c:4d:e6:21 (try 1/3)
wlan0: RX AssocResp from 00:11:5c:4d:e6:21 (capab=0x421 status=0 aid=224)
wlan0: associated
audit_printk_skb: 39 callbacks suppressed
type=1701 audit(1360065841.171:25): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=17383 comm="chrome" reason="seccomp" sig=0 syscall=39 compat=0 ip=0x7f9ce9cabed9 code=0x50000
type=1701 audit(1360065843.735:26): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=17413 comm="chrome" reason="seccomp" sig=0 syscall=4 compat=0 ip=0x7f9ce9ca2205 code=0x50000
type=1701 audit(1360065843.735:27): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=17413 comm="chrome" reason="seccomp" sig=0 syscall=4 compat=0 ip=0x7f9ce9ca2205 code=0x50000
type=1701 audit(1360065843.735:28): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=17413 comm="chrome" reason="seccomp" sig=0 syscall=4 compat=0 ip=0x7f9ce9ca2205 code=0x50000
type=1701 audit(1360065843.735:29): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=17413 comm="chrome" reason="seccomp" sig=0 syscall=4 compat=0 ip=0x7f9ce9ca2205 code=0x50000
type=1701 audit(1360065843.735:30): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=17413 comm="chrome" reason="seccomp" sig=0 syscall=4 compat=0 ip=0x7f9ce9ca2205 code=0x50000
type=1701 audit(1360065844.083:31): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=17425 comm="chrome" reason="seccomp" sig=0 syscall=4 compat=0 ip=0x7f9ce9ca2205 code=0x50000
type=1701 audit(1360065844.083:32): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=17425 comm="chrome" reason="seccomp" sig=0 syscall=4 compat=0 ip=0x7f9ce9ca2205 code=0x50000
type=1701 audit(1360065844.083:33): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=17425 comm="chrome" reason="seccomp" sig=0 syscall=4 compat=0 ip=0x7f9ce9ca2205 code=0x50000
type=1701 audit(1360065844.083:34): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=17425 comm="chrome" reason="seccomp" sig=0 syscall=4 compat=0 ip=0x7f9ce9ca2205 code=0x50000
wlan0: deauthenticated from 00:11:5c:4d:e6:21 (Reason: 2)
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:11:5c:4d:ec:c1
wlan0: direct probe to 00:11:5c:4d:ec:c1 (try 1/3)
wlan0: direct probe to 00:11:5c:4d:ec:c1 (try 2/3)
wlan0: direct probe to 00:11:5c:4d:ec:c1 (try 3/3)
wlan0: authentication with 00:11:5c:4d:ec:c1 timed out
wlan0: authenticate with 00:11:5c:4d:e6:21
wlan0: send auth to 00:11:5c:4d:e6:21 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:11:5c:4d:e6:21 (try 1/3)
wlan0: RX AssocResp from 00:11:5c:4d:e6:21 (capab=0x421 status=0 aid=227)
wlan0: associated