dmesg - test1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.7.2-204.fc18.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 4.7.2 20121109 (Red Hat 4.7.2-8) (GCC) ) #1 SMP Wed Jan 16 16:22:52 UTC 2013
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
BIOS-e820: [mem 0x0000000040005000-0x000000009aabefff] usable
BIOS-e820: [mem 0x000000009aabf000-0x000000009aebefff] reserved
BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001df5fffff] usable
NX (Execute Disable) protection: active
DMI 2.7 present.
DMI: Dell Inc. Inspiron 5520/0XWH1P, BIOS A05 03/16/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x1df600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-combining
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FE0000000 write-back
2 base 09B000000 mask FFF000000 uncachable
3 base 09C000000 mask FFC000000 uncachable
4 base 0FFA00000 mask FFFE00000 write-protect
5 base 0FFC00000 mask FFFC00000 write-protect
6 base 100000000 mask F00000000 write-back
7 base 1DF600000 mask FFFE00000 uncachable
8 base 1DF800000 mask FFF800000 uncachable
9 base 1E0000000 mask FE0000000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x9affffff]
[mem 0x00000000-0x9affffff] page 2M
kernel direct mapping tables up to 0x9affffff @ [mem 0x1fffc000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x1df5fffff]
[mem 0x100000000-0x1df5fffff] page 2M
kernel direct mapping tables up to 0x1df5fffff @ [mem 0x9aaba000-0x9aabefff]
RAMDISK: [mem 0x3598e000-0x36cbefff]
ACPI: RSDP 00000000000fe020 00024 (v02 DELL )
ACPI: XSDT 000000009affe210 0008C (v01 DELL CL09 00000001 01000013)
ACPI: FACP 000000009affb000 0010C (v05 DELL CL09 00000001 ASL 00040000)
ACPI: DSDT 000000009afef000 08FBB (v01 DELL CL09 00000000 ASL 00040000)
ACPI: FACS 000000009afb9000 00040
ACPI: UEFI 000000009affd000 00236 (v01 DELL CL09 00000001 ASL 00040000)
ACPI: ASF! 000000009affc000 000A5 (v32 DELL CL09 00000001 ASL 00040000)
ACPI: HPET 000000009affa000 00038 (v01 DELL CL09 00000001 ASL 00040000)
ACPI: APIC 000000009aff9000 0008C (v03 DELL CL09 00000001 ASL 00040000)
ACPI: MCFG 000000009aff8000 0003C (v01 DELL CL09 00000001 ASL 00040000)
ACPI: SSDT 000000009afee000 006FE (v01 COMPAL CRV ORB 00001000 ACPI 00040000)
ACPI: BOOT 000000009afec000 00028 (v01 DELL CL09 00000001 ASL 00040000)
ACPI: ASPT 000000009afe7000 00034 (v07 DELL CL09 00000001 ASL 00040000)
ACPI: FPDT 000000009afe5000 00044 (v01 DELL CL09 00000001 ASL 00040000)
ACPI: SSDT 000000009afe4000 00860 (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
ACPI: SSDT 000000009afe3000 00A92 (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
ACPI: SSDT 000000009afe1000 01ED5 (v01 COMPAL CRV ORB 00001000 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000001df5fffff]
Initmem setup node 0 [mem 0x00000000-0x1df5fffff]
NODE_DATA [mem 0x1df5ec000-0x1df5fffff]
[ffffea0000000000-ffffea00077fffff] PMD -> [ffff8801d8c00000-ffff8801debfffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x1df5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x40003fff]
node 0: [mem 0x40005000-0x9aabefff]
node 0: [mem 0x9afff000-0x9affffff]
node 0: [mem 0x100000000-0x1df5fffff]
On node 0 totalpages: 1547852
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3911 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 612607 pages, LIFO batch:31
Normal zone: 14296 pages used for memmap
Normal zone: 900648 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
PM: Registered nosave memory: 0000000040004000 - 0000000040005000
PM: Registered nosave memory: 000000009aabf000 - 000000009aebf000
PM: Registered nosave memory: 000000009aebf000 - 000000009afbf000
PM: Registered nosave memory: 000000009afbf000 - 000000009afff000
PM: Registered nosave memory: 000000009b000000 - 000000009fa00000
PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffb80000
PM: Registered nosave memory: 00000000ffb80000 - 0000000100000000
e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff8801df200000 s84288 r8192 d22208 u262144
pcpu-alloc: s84288 r8192 d22208 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1517166
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Memory: 5990168k/7854080k available (6407k kernel code, 1662672k absent, 201240k reserved, 6793k data, 1068k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
NR_IRQS:8448 nr_irqs:744 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 25165824 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2095.307 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.61 BogoMIPS (lpj=2095307)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 1
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20120913
ftrace: allocating 23745 entries in 93 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-3612QM CPU @ 2.10GHz (fam: 06, model: 3a, stepping: 09)
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
Brought up 8 CPUs
smpboot: Total of 8 processors activated (33524.91 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
atomic64 test passed for x86-64 platform with CX8 and with SSE
RTC time: 10:11:43, date: 01/24/13
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
dmi type 0xB1 record - unknown flag
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 000000009adf9018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
ACPI: SSDT 000000009adfaa98 00303 (v01 PmRef ApIst 00003000 INTL 20111123)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20111123)
ACPI: SSDT 000000009adf8d98 00119 (v01 PmRef ApCst 00003000 INTL 20111123)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20111123)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xc1000000-0xc13fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 10: [mem 0xc1600000-0xc160ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xc1614000-0xc161400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xc1619000-0xc16193ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xc1610000-0xc1613fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xc1618000-0xc16183ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f]
pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097]
pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087]
pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093]
pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
pci 0000:00:1f.2: reg 24: [mem 0xc1617000-0xc16177ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xc1615000-0xc16150ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x4040-0x405f]
pci 0000:01:00.0: [1002:6840] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xc0000000-0xc001ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0x3000-0x30ff]
pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-06]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc0ffffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:07:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:07:00.0: reg 10: [io 0x2000-0x20ff]
pci 0000:07:00.0: reg 18: [mem 0xc1404000-0xc1404fff 64bit pref]
pci 0000:07:00.0: reg 20: [mem 0xc1400000-0xc1403fff 64bit pref]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xc1400000-0xc14fffff 64bit pref]
pci 0000:08:00.0: [8086:0887] type 00 class 0x028000
pci 0000:08:00.0: reg 10: [mem 0xc1500000-0xc1501fff 64bit]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 08]
pci 0000:00:1c.1: bridge window [mem 0xc1500000-0xc15fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
_OSC request data:1 1f 1f
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0x9aabf000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
e820: reserve RAM buffer [mem 0x1df600000-0x1dfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-fe]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0x9fa00000-0xfeafffff window]
pnp 00:00: [mem 0x00010000-0x0001ffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0000-0x001f]
pnp 00:01: [io 0x0081-0x0091]
pnp 00:01: [io 0x0093-0x009f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [mem 0xff010000-0xffffffff]
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io 0x00f0]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io 0x002e-0x002f]
pnp 00:05: [io 0x004e-0x004f]
pnp 00:05: [io 0x0061]
pnp 00:05: [io 0x0063]
pnp 00:05: [io 0x0065]
pnp 00:05: [io 0x0067]
pnp 00:05: [io 0x0070]
pnp 00:05: [io 0x0080]
pnp 00:05: [io 0x0092]
pnp 00:05: [io 0x00b2-0x00b3]
pnp 00:05: [io 0x0680-0x069f]
pnp 00:05: [io 0x1000-0x100f]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0x0400-0x0453]
pnp 00:05: [io 0x0458-0x047f]
pnp 00:05: [io 0x0500-0x057f]
pnp 00:05: [io 0x164e-0x164f]
pnp 00:05: [io 0xfd60-0xfd63]
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0x1000-0x100f] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x0400-0x0453] has been reserved
system 00:05: [io 0x0458-0x047f] has been reserved
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:05: [io 0xfd60-0xfd63] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [io 0x0070-0x0077]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io 0x0454-0x0457]
system 00:07: [io 0x0454-0x0457] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs DLL056a PNP0f13 (active)
pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0a: [mem 0xfed10000-0xfed17fff]
pnp 00:0a: [mem 0xfed18000-0xfed18fff]
pnp 00:0a: [mem 0xfed19000-0xfed19fff]
pnp 00:0a: [mem 0xe0000000-0xefffffff]
pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
pnp 00:0a: [mem 0xfed90000-0xfed93fff]
pnp 00:0a: [mem 0xff000000-0xff000fff]
pnp 00:0a: [mem 0xff010000-0xffffffff]
pnp 00:0a: [mem 0xfee00000-0xfeefffff]
pnp 00:0a: [mem 0x9fa00000-0x9fa00fff]
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0a: [mem 0xff000000-0xff000fff] has been reserved
system 00:0a: [mem 0xff010000-0xffffffff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: [mem 0x9fa00000-0x9fa00fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0x20000000-0x201fffff]
pnp 00:0b: [mem 0x40004000-0x40004fff]
system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
system 00:0b: [mem 0x40004000-0x40004fff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xc0020000-0xc003ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-06]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc0ffffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xc1400000-0xc14fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 08]
pci 0000:00:1c.1: bridge window [mem 0xc1500000-0xc15fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc0ffffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:07: resource 2 [mem 0xc1400000-0xc14fffff 64bit pref]
pci_bus 0000:08: resource 1 [mem 0xc1500000-0xc15fffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 19652k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x96aba000-0x9aab9fff] (64MB) mapped at [ffff880096aba000-ffff88009aab9fff]
Simple Boot Flag at 0x44 set to 0x1
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1359022303.806:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 11737
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vesafb: mode is 1366x768x32, linelength=5504, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90011600000, using 4160k, total 4160k
Console: switching to colour frame buffer device 170x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT1] (battery present)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xc1617000 port 0xc1617100 irq 41
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xc1617000 port 0xc1617200 irq 41
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc1619000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.7.2-204.fc18.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xc1618000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.7.2-204.fc18.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 21, io mem 0xc1600000
xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.7.2-204.fc18.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.7.2-204.fc18.x86_64 xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Fedora kernel signing key: 5d4d3db151807b6ebce83001a24319304d98d21f'
registered taskstats version 1
Magic number: 13:447:174
acpi device:37: hash matches
acpi device:0a: hash matches
rtc_cmos 00:06: setting system clock to 2013-01-24 10:11:46 UTC (1359022306)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATAPI: TSSTcorp DVD+/-RW SN-208BB, D300, max UDMA/100
usb 1-1: new high-speed USB device number 2 using ehci_hcd
ata3.00: configured for UDMA/100
ata1.00: ATA-8: WDC WD10JPVT-75A1YT0, 01.01A01, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: failed to get Identify Device Data, Emask 0x1
ata1.00: failed to get Identify Device Data, Emask 0x1
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD10JPVT-75A 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: CD-ROM TSSTcorp DVD+-RW SN-208BB D300 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 1068k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1776k freed
Freeing unused kernel memory: 1404k freed
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
systemd[1]: systemd 197 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
systemd[1]: Running in initial RAM disk.
systemd[1]: No hostname configured.
systemd[1]: Set hostname to .
systemd[1]: Initializing machine ID from random generator.
usb 2-1: new high-speed USB device number 2 using ehci_hcd
tsc: Refined TSC clocksource calibration: 2095.241 MHz
Switching to clocksource tsc
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd[1]: Starting Sockets.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Swap.
systemd[1]: Reached target Swap.
systemd[1]: Starting Local File Systems.
systemd[1]: Reached target Local File Systems.
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
systemd-udevd[186]: starting version 197
usb 3-3: new low-speed USB device number 2 using xhci_hcd
usb 3-3: New USB device found, idVendor=0458, idProduct=003a
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: Optical Mouse
usb 3-3: Manufacturer: Genius
usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Genius Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input4
hid-generic 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:14.0-3/input0
usb 1-1.3: new high-speed USB device number 3 using ehci_hcd
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0129
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: USB2.0-CRW
usb 1-1.3: Manufacturer: Generic
usb 1-1.3: SerialNumber: 20100201396000000
[drm:drm_pci_agp_init] *ERROR* Cannot initialize the agpgart module.
DRM: Fill_in_dev failed.
psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f02)
[drm] VGACON disable radeon kernel modesetting.
pci 0000:01:00.0: enabling device (0000 -> 0003)
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0
psmouse serio1: elantech: Synaptics capabilities query result 0x79, 0x17, 0x0c.
usb 1-1.5: new high-speed USB device number 4 using ehci_hcd
mtrr: no more MTRRs available
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
usb 1-1.5: New USB device found, idVendor=0bda, idProduct=58bf
usb 1-1.5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-1.5: Product: Laptop_Integrated_Webcam_HD
usb 1-1.5: Manufacturer: CKFB187F301030002150
usb 1-1.5: SerialNumber: 0x0001
usb 2-1.5: new full-speed USB device number 3 using ehci_hcd
usb 2-1.5: New USB device found, idVendor=8087, idProduct=07da
usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[125]: Received SIGTERM
type=1404 audit(1359022309.621:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 94087 rules.
SELinux: 2048 avtab hash slots, 94087 rules.
ACPI: Invalid Power Resource to register!
SELinux: 9 users, 15 roles, 4356 types, 237 bools
, 1 sens, 1024 cats
SELinux: 83 classes, 94087 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev sda2, type ext4), uses xattr
type=1403 audit(1359022309.907:3): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 334ms 722us.
systemd[1]: RTC configured in localtime, applying delta of 420 minutes to system time.
systemd[1]: Relabelled /dev and /run in 17ms 763us.
systemd-readahead[368]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
systemd-udevd[376]: starting version 197
EXT4-fs (sda2): re-mounted. Opts: (null)
SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
Disabling lock debugging due to kernel taint
vboxdrv: Found 8 processor cores.
vboxdrv: fAsync=0 offMin=0x22e offMax=0x11aa0
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.6_RPMFusion (interface 0x001a0004).
microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x10
microcode: CPU0 updated to revision 0x13, date = 2012-07-16
microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x10
microcode: CPU1 updated to revision 0x13, date = 2012-07-16
microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x10
microcode: CPU2 updated to revision 0x13, date = 2012-07-16
microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x10
microcode: CPU3 updated to revision 0x13, date = 2012-07-16
microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x10
microcode: CPU4 updated to revision 0x13, date = 2012-07-16
microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x10
microcode: CPU5 updated to revision 0x13, date = 2012-07-16
microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x10
microcode: CPU6 updated to revision 0x13, date = 2012-07-16
microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x10
microcode: CPU7 updated to revision 0x13, date = 2012-07-16
microcode: Microcode Update Driver: v2.00 , Peter Oruba
input: Dell WMI hotkeys as /devices/virtual/input/input6
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
Registered led device: dell-laptop::touchpad
ACPI Warning: 0x0000000000004040-0x000000000000405f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120913/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120913/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 1 (20120913/utaddress-251)
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 2 (20120913/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 1 (20120913/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 2 (20120913/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 43 for MSI/MSI-X
mei 0000:00:16.0: wd: failed to find the client
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:07:00.0: irq 44 for MSI/MSI-X
r8169 0000:07:00.0 eth0: RTL8105e at 0xffffc90000c7e000, d4:be:d9:29:df:a4, XID 00c00000 IRQ 44
cfg80211: Calling CRDA to update world regulatory domain
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Intel(R) Wireless WiFi driver for Linux, in-tree:d
Copyright(c) 2003-2012 Intel Corporation
iwlwifi 0000:08:00.0: pci_resource_len = 0x00002000
iwlwifi 0000:08:00.0: pci_resource_base = ffffc900115d4000
iwlwifi 0000:08:00.0: HW Revision ID = 0xC4
iwlwifi 0000:08:00.0: irq 45 for MSI/MSI-X
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
hda_codec: CX20590: BIOS auto-probing.
ALSA sound/pci/hda/hda_auto_parser.c:318 autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
ALSA sound/pci/hda/hda_auto_parser.c:322 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_auto_parser.c:326 hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_auto_parser.c:327 mono: mono_out=0x0
ALSA sound/pci/hda/hda_auto_parser.c:331 inputs:
ALSA sound/pci/hda/hda_auto_parser.c:335 Mic=0x1a
ALSA sound/pci/hda/hda_auto_parser.c:335 Internal Mic=0x23
ALSA sound/pci/hda/patch_conexant.c:4531 hda_codec: Enable sync_write for stable communication
systemd-udevd[436]: renamed network interface eth0 to em1
media: Linux media interface: v0.10
usbcore: registered new interface driver btusb
iwlwifi 0000:08:00.0: loaded firmware version 18.168.6.1
iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
iwldvm: Copyright(c) 2003-2012 Intel Corporation
iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEBUG enabled
iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_P2P disabled
iwlwifi 0000:08:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
iwlwifi 0000:08:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:08:00.0: device EEPROM VER=0x81c, CALIB=0x6
iwlwifi 0000:08:00.0: Device SKU: 0x150
iwlwifi 0000:08:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
Registered led device: phy0-led
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
Linux video capture interface: v2.00
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0bda:58bf)
input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
psmouse serio1: issuing reconnect request
Adding 9215996k swap on /dev/sda5. Priority:-1 extents:1 across:9215996k
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev sda1, type ext4), uses xattr
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev sda3, type ext4), uses xattr
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev sda6, type ext4), uses xattr
systemd-journald[399]: Received SIGUSR1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
r8169 0000:07:00.0 em1: link down
IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
iwlwifi 0000:08:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:08:00.0: Radio type=0x2-0x0-0x0
iwlwifi 0000:08:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:08:00.0: Radio type=0x2-0x0-0x0
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
mtrr: no more MTRRs available
wlan0: authenticate with 00:23:69:2c:8d:7a
wlan0: send auth to 00:23:69:2c:8d:7a (try 1/3)
wlan0: authenticated
iwlwifi 0000:08:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:08:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 00:23:69:2c:8d:7a (try 1/3)
wlan0: RX AssocResp from 00:23:69:2c:8d:7a (capab=0x401 status=0 aid=10)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: 2048 avtab hash slots, 94354 rules.
SELinux: 2048 avtab hash slots, 94354 rules.
SELinux: 9 users, 15 roles, 4357 types, 236 bools, 1 sens, 1024 cats
SELinux: 83 classes, 94354 rules
usb 3-4: new high-speed USB device number 3 using xhci_hcd
usb 3-4: New USB device found, idVendor=04e8, idProduct=6860
usb 3-4: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 3-4: Product: Android
usb 3-4: Manufacturer: Android
usb 3-4: SerialNumber: 75650d92
cdc_acm 3-4:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 3-4:1.1: ttyACM0: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
EXT4-fs (sda1): Unaligned AIO/DIO on inode 14156033 by AioMgr0-N; performance will be poor.
ibus-engine-uni[2670]: segfault at 7f7183c6a788 ip 0000003e7c67be53 sp 00007fff5a160fa0 error 4 in libc-2.16.so[3e7c600000+1ad000]
wlan0: deauthenticating from 00:23:69:2c:8d:7a by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 54:e6:fc:ef:cc:0a
wlan0: send auth to 54:e6:fc:ef:cc:0a (try 1/3)
wlan0: authenticated
iwlwifi 0000:08:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:08:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 54:e6:fc:ef:cc:0a (try 1/3)
wlan0: RX AssocResp from 54:e6:fc:ef:cc:0a (capab=0x411 status=0 aid=4)
wlan0: associated
ibus-engine-uni[5464]: segfault at 7fcb0bc6a788 ip 0000003e7c67be53 sp 00007fff61bbd550 error 4 in libc-2.16.so[3e7c600000+1ad000]
psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
psmouse serio1: issuing reconnect request
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 54:e6:fc:ef:cc:0a
wlan0: send auth to 54:e6:fc:ef:cc:0a (try 1/3)
wlan0: send auth to 54:e6:fc:ef:cc:0a (try 2/3)
wlan0: send auth to 54:e6:fc:ef:cc:0a (try 3/3)
wlan0: authentication with 54:e6:fc:ef:cc:0a timed out
wlan0: authenticate with 54:e6:fc:ef:cc:0a
wlan0: send auth to 54:e6:fc:ef:cc:0a (try 1/3)
wlan0: send auth to 54:e6:fc:ef:cc:0a (try 2/3)
wlan0: send auth to 54:e6:fc:ef:cc:0a (try 3/3)
wlan0: authentication with 54:e6:fc:ef:cc:0a timed out
wlan0: authenticate with 54:e6:fc:ef:cc:0a
wlan0: send auth to 54:e6:fc:ef:cc:0a (try 1/3)
wlan0: send auth to 54:e6:fc:ef:cc:0a (try 2/3)
wlan0: send auth to 54:e6:fc:ef:cc:0a (try 3/3)
wlan0: authentication with 54:e6:fc:ef:cc:0a timed out
wlan0: authenticate with 54:e6:fc:ef:cc:0a
wlan0: send auth to 54:e6:fc:ef:cc:0a (try 1/3)
wlan0: send auth to 54:e6:fc:ef:cc:0a (try 2/3)
wlan0: send auth to 54:e6:fc:ef:cc:0a (try 3/3)
wlan0: authentication with 54:e6:fc:ef:cc:0a timed out
wlan0: authenticate with 54:e6:fc:ef:cc:0a
wlan0: send auth to 54:e6:fc:ef:cc:0a (try 1/3)
wlan0: send auth to 54:e6:fc:ef:cc:0a (try 2/3)
wlan0: authenticated
iwlwifi 0000:08:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:08:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 54:e6:fc:ef:cc:0a (try 1/3)
wlan0: associate with 54:e6:fc:ef:cc:0a (try 2/3)
wlan0: RX AssocResp from 54:e6:fc:ef:cc:0a (capab=0x411 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 54:e6:fc:ef:cc:0a
wlan0: send auth to 54:e6:fc:ef:cc:0a (try 1/3)
wlan0: send auth to 54:e6:fc:ef:cc:0a (try 2/3)
wlan0: send auth to 54:e6:fc:ef:cc:0a (try 3/3)
wlan0: authentication with 54:e6:fc:ef:cc:0a timed out
wlan0: authenticate with 54:e6:fc:ef:cc:0a
wlan0: send auth to 54:e6:fc:ef:cc:0a (try 1/3)
wlan0: authenticated
iwlwifi 0000:08:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:08:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
wlan0: associate with 54:e6:fc:ef:cc:0a (try 1/3)
wlan0: RX AssocResp from 54:e6:fc:ef:cc:0a (capab=0x411 status=0 aid=1)
wlan0: associated
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
usb 3-4: USB disconnect, device number 3