dmesg - samia
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.6.11-1.fc17.x86_64 (mockbuild@) (gcc version 4.7.2 20120921 (Red Hat 4.7.2-2) (GCC) ) #1 SMP Mon Dec 17 22:16:35 UTC 2012
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dd8f4fff] usable
BIOS-e820: [mem 0x00000000dd8f5000-0x00000000ddecefff] reserved
BIOS-e820: [mem 0x00000000ddecf000-0x00000000ddedffff] ACPI data
BIOS-e820: [mem 0x00000000ddee0000-0x00000000de009fff] ACPI NVS
BIOS-e820: [mem 0x00000000de00a000-0x00000000de7fffff] reserved
BIOS-e820: [mem 0x00000000de800000-0x00000000de800fff] usable
BIOS-e820: [mem 0x00000000de801000-0x00000000de843fff] ACPI NVS
BIOS-e820: [mem 0x00000000de844000-0x00000000dec65fff] usable
BIOS-e820: [mem 0x00000000dec66000-0x00000000deff3fff] reserved
BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable
NX (Execute Disable) protection: active
DMI 2.7 present.
DMI: System manufacturer System Product Name/P8Z77-V LE PLUS, BIOS 0605 10/12/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x41f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask C00000000 write-back
1 base 400000000 mask FF0000000 write-back
2 base 410000000 mask FF8000000 write-back
3 base 418000000 mask FFC000000 write-back
4 base 41C000000 mask FFE000000 write-back
5 base 41E000000 mask FFF000000 write-back
6 base 0E0000000 mask FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 256MB, type WB
reg 2, base: 16640MB, range: 128MB, type WB
reg 3, base: 16768MB, range: 64MB, type WB
reg 4, base: 16832MB, range: 32MB, type WB
reg 5, base: 16864MB, range: 16MB, type WB
reg 6, base: 3584MB, range: 512MB, type UC
total RAM covered: 16368M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 512MB, type WB
reg 6, base: 16880MB, range: 16MB, type UC
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd870-0x000fd87f] mapped at [ffff8800000fd870]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000096000] 96000 size 24576
init_memory_mapping: [mem 0x00000000-0xdeffffff]
[mem 0x00000000-0xdeffffff] page 2M
kernel direct mapping tables up to 0xdeffffff @ [mem 0x1fffb000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x41effffff]
[mem 0x100000000-0x41effffff] page 2M
kernel direct mapping tables up to 0x41effffff @ [mem 0xdec58000-0xdec65fff]
RAMDISK: [mem 0x35b5e000-0x36da6fff]
ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
ACPI: XSDT 00000000dded3080 00074 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000ddeddce8 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000dded3188 0AB60 (v02 ALASKA A M I 00000022 INTL 20051117)
ACPI: FACS 00000000de008080 00040
ACPI: APIC 00000000ddedddf8 00092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000ddedde90 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000ddedded8 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000ddeddf18 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000ddeddf50 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 00000000ddede2c0 009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000ddedec70 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: BGRT 00000000ddedf7e0 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: DMAR 00000000ddedf760 00080 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041effffff]
Initmem setup node 0 [mem 0x00000000-0x41effffff]
NODE_DATA [mem 0x41efec000-0x41effffff]
[ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040e600000-ffff88041e5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x41effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009bfff]
node 0: [mem 0x00100000-0xdd8f4fff]
node 0: [mem 0xde800000-0xde800fff]
node 0: [mem 0xde844000-0xdec65fff]
node 0: [mem 0xdeff4000-0xdeffffff]
node 0: [mem 0x100000000-0x41effffff]
On node 0 totalpages: 4181168
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3910 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 888164 pages, LIFO batch:31
Normal zone: 51136 pages used for memmap
Normal zone: 3221568 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009c000 - 000000000009d000
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000dd8f5000 - 00000000ddecf000
PM: Registered nosave memory: 00000000ddecf000 - 00000000ddee0000
PM: Registered nosave memory: 00000000ddee0000 - 00000000de00a000
PM: Registered nosave memory: 00000000de00a000 - 00000000de800000
PM: Registered nosave memory: 00000000de801000 - 00000000de844000
PM: Registered nosave memory: 00000000dec66000 - 00000000deff4000
PM: Registered nosave memory: 00000000df000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88041ec00000 s84288 r8192 d22208 u262144
pcpu-alloc: s84288 r8192 d22208 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4113642
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Memory: 16360508k/17285120k available (6316k kernel code, 560448k absent, 364164k reserved, 6887k data, 1032k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
NR_IRQS:8448 nr_irqs:744 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3399.935 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.87 BogoMIPS (lpj=3399935)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift is 0x1
ACPI: Core revision 20120711
ftrace: allocating 23454 entries in 92 pages
dmar: Host address width 36
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
dmar: RMRR base: 0x000000dde51000 end: 0x000000dde62fff
IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
HPET id 0 under DRHD base 0xfed90000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz stepping 09
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
Brought up 8 CPUs
smpboot: Total of 8 processors activated (54398.96 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xddee0000-0xde009fff] (1220608 bytes)
PM: Registering ACPI NVS region [mem 0xde801000-0xde843fff] (274432 bytes)
atomic64 test passed for x86-64 platform with CX8 and with SSE
RTC time: 18:07:09, date: 01/17/13
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000dde7c018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000dde7da98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000dde7ec18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
PCI host bridge to bus 0000:00
pci_bus 0000:00: busn_res: [bus 00-3e] is inserted under domain [bus 00-ff]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 10: [mem 0xf7400000-0xf740ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xf741a000-0xf741a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xf7418000-0xf74183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf7410000-0xf7413fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: [8086:1e1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xf7417000-0xf74173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 24: [mem 0xf7416000-0xf74167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf7415000-0xf74150ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-3e]
pci 0000:01:00.0: [10de:0de1] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-3e]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-3e]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 18: [mem 0xf2104000-0xf2104fff 64bit pref]
pci 0000:03:00.0: reg 20: [mem 0xf2100000-0xf2103fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci_bus 0000:04: busn_res: [bus 04-05] is inserted under [bus 00-3e]
pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
pci 0000:00:1c.5: PCI bridge to [bus 04-05] (subtractive decode)
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xf7300000-0xf73fffff]
pci 0000:00:1c.5: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.5: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1c.5: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
pci_bus 0000:05: busn_res: [bus 05] is inserted under [bus 04-05]
pci 0000:05:00.0: [1102:0004] type 00 class 0x040100
pci 0000:05:00.0: reg 10: [io 0xc200-0xc23f]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.1: [1102:7003] type 00 class 0x098000
pci 0000:05:00.1: reg 10: [io 0xc240-0xc247]
pci 0000:05:00.1: supports D1 D2
pci 0000:05:00.2: [1102:4001] type 00 class 0x0c0010
pci 0000:05:00.2: reg 10: [mem 0xf732a000-0xf732a7ff]
pci 0000:05:00.2: reg 14: [mem 0xf7320000-0xf7323fff]
pci 0000:05:00.2: supports D1 D2
pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot
pci 0000:05:01.0: [1000:0021] type 00 class 0x010000
pci 0000:05:01.0: reg 10: [io 0xc100-0xc1ff]
pci 0000:05:01.0: reg 14: [mem 0xf7329000-0xf73293ff 64bit]
pci 0000:05:01.0: reg 1c: [mem 0xf7326000-0xf7327fff 64bit]
pci 0000:05:01.0: reg 30: [mem 0xf7310000-0xf731ffff pref]
pci 0000:05:01.0: supports D1 D2
pci 0000:05:01.1: [1000:0021] type 00 class 0x010000
pci 0000:05:01.1: reg 10: [io 0xc000-0xc0ff]
pci 0000:05:01.1: reg 14: [mem 0xf7328000-0xf73283ff 64bit]
pci 0000:05:01.1: reg 1c: [mem 0xf7324000-0xf7325fff 64bit]
pci 0000:05:01.1: reg 30: [mem 0xf7300000-0xf730ffff pref]
pci 0000:05:01.1: supports D1 D2
pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0xc000-0xcfff]
pci 0000:04:00.0: bridge window [mem 0xf7300000-0xf73fffff]
pci 0000:04:00.0: bridge window [io 0xc000-0xcfff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0xf7300000-0xf73fffff] (subtractive decode)
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
pci_bus 0000:06: busn_res: [bus 06] is inserted under [bus 00-3e]
pci 0000:06:00.0: [1b4b:9120] type 00 class 0x010601
pci 0000:06:00.0: reg 10: [io 0xb090-0xb097]
pci 0000:06:00.0: reg 14: [io 0xb080-0xb083]
pci 0000:06:00.0: reg 18: [io 0xb070-0xb077]
pci 0000:06:00.0: reg 1c: [io 0xb060-0xb063]
pci 0000:06:00.0: reg 20: [io 0xb050-0xb05f]
pci 0000:06:00.0: reg 24: [mem 0xf7215000-0xf72157ff]
pci 0000:06:00.0: reg 30: [mem 0xf7200000-0xf720ffff pref]
pci 0000:06:00.0: PME# supported from D3hot
pci 0000:00:1c.6: PCI bridge to [bus 06]
pci 0000:00:1c.6: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.6: bridge window [mem 0xf7200000-0xf72fffff]
pci_bus 0000:07: busn_res: [bus 07] is inserted under [bus 00-3e]
pci 0000:07:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:07:00.0: reg 10: [mem 0xf7100000-0xf7107fff 64bit]
pci 0000:07:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 07]
pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06.PXSX._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x18) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdd8f5000-0xdfffffff]
e820: reserve RAM buffer [mem 0xde801000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdec66000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3e]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0xe0000000-0xfeafffff window]
pnp 00:00: [mem 0x00010000-0x0001ffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed40000-0xfed44fff]
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io 0x0000-0x001f]
pnp 00:02: [io 0x0081-0x0091]
pnp 00:02: [io 0x0093-0x009f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [mem 0xff000000-0xffffffff]
pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:04: [mem 0xfed00000-0xfed003ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io 0x002e-0x002f]
pnp 00:05: [io 0x004e-0x004f]
pnp 00:05: [io 0x0061]
pnp 00:05: [io 0x0063]
pnp 00:05: [io 0x0065]
pnp 00:05: [io 0x0067]
pnp 00:05: [io 0x0070]
pnp 00:05: [io 0x0080]
pnp 00:05: [io 0x0092]
pnp 00:05: [io 0x00b2-0x00b3]
pnp 00:05: [io 0x0680-0x069f]
pnp 00:05: [io 0x1000-0x100f]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0x0400-0x0453]
pnp 00:05: [io 0x0458-0x047f]
pnp 00:05: [io 0x0500-0x057f]
pnp 00:05: [io 0x164e-0x164f]
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0x1000-0x100f] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x0400-0x0453] has been reserved
system 00:05: [io 0x0458-0x047f] has been reserved
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [io 0x0070-0x0077]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io 0x0454-0x0457]
system 00:07: [io 0x0454-0x0457] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io 0x0290-0x029f]
pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
system 00:08: [io 0x0290-0x029f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x0010-0x001f]
pnp 00:09: [io 0x0022-0x003f]
pnp 00:09: [io 0x0044-0x005f]
pnp 00:09: [io 0x0063]
pnp 00:09: [io 0x0065]
pnp 00:09: [io 0x0067-0x006f]
pnp 00:09: [io 0x0072-0x007f]
pnp 00:09: [io 0x0080]
pnp 00:09: [io 0x0084-0x0086]
pnp 00:09: [io 0x0088]
pnp 00:09: [io 0x008c-0x008e]
pnp 00:09: [io 0x0090-0x009f]
pnp 00:09: [io 0x00a2-0x00bf]
pnp 00:09: [io 0x00e0-0x00ef]
pnp 00:09: [io 0x04d0-0x04d1]
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io 0x00f0-0x00ff]
pnp 00:0a: [irq 13]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0b: [io 0x0060]
pnp 00:0b: [io 0x0064]
pnp 00:0b: [irq 1]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0c: [io 0x03f8-0x03ff]
pnp 00:0c: [irq 4]
pnp 00:0c: [dma 0 disabled]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0d: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0d: [mem 0xfed10000-0xfed17fff]
pnp 00:0d: [mem 0xfed18000-0xfed18fff]
pnp 00:0d: [mem 0xfed19000-0xfed19fff]
pnp 00:0d: [mem 0xf8000000-0xfbffffff]
pnp 00:0d: [mem 0xfed20000-0xfed3ffff]
pnp 00:0d: [mem 0xfed90000-0xfed93fff]
pnp 00:0d: [mem 0xfed45000-0xfed8ffff]
pnp 00:0d: [mem 0xff000000-0xffffffff]
pnp 00:0d: [mem 0xfee00000-0xfeefffff]
pnp 00:0d: [mem 0xe0000000-0xe0000fff]
system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0d: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0d: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0d: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0d: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0d: [mem 0xff000000-0xffffffff] has been reserved
system 00:0d: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0d: [mem 0xe0000000-0xe0000fff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:04:00.0: bridge window [io 0xc000-0xcfff]
pci 0000:04:00.0: bridge window [mem 0xf7300000-0xf73fffff]
pci 0000:00:1c.5: PCI bridge to [bus 04-05]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xf7300000-0xf73fffff]
pci 0000:00:1c.6: PCI bridge to [bus 06]
pci 0000:00:1c.6: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.6: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:1c.7: PCI bridge to [bus 07]
pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:04:00.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 12 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xf7300000-0xf73fffff]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:04: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:04: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:04: resource 10 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:04: resource 11 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:04: resource 12 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xf7300000-0xf73fffff]
pci_bus 0000:05: resource 4 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 5 [mem 0xf7300000-0xf73fffff]
pci_bus 0000:05: resource 8 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 9 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 11 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:05: resource 12 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:05: resource 13 [mem 0x000dc000-0x000dffff]
pci_bus 0000:05: resource 14 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:05: resource 15 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:05: resource 16 [mem 0xe0000000-0xfeafffff]
pci_bus 0000:06: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:06: resource 1 [mem 0xf7200000-0xf72fffff]
pci_bus 0000:07: resource 1 [mem 0xf7100000-0xf71fffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 18724k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd98f5000-0xdd8f4fff] (64MB) mapped at [ffff8800d98f5000-ffff8800dd8f4fff]
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
audit: initializing netlink socket (disabled)
type=2000 audit(1358446029.413:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 31990
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
NET: Registered protocol family 38
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xb impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7416000 port 0xf7416100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xf7416000 port 0xf7416180 irq 42
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xf7416000 port 0xf7416280 irq 42
ata5: DUMMY
ata6: DUMMY
ahci 0000:06:00.0: irq 43 for MSI/MSI-X
ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:06:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m2048@0xf7215000 port 0xf7215100 irq 43
ata8: SATA max UDMA/133 abar m2048@0xf7215000 port 0xf7215180 irq 43
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 23, io mem 0xf7418000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.6.11-1.fc17.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7417000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.6.11-1.fc17.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7400000
xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.6.11-1.fc17.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.6.11-1.fc17.x86_64 xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:07:00.0: irq 19, io mem 0xf7100000
xhci_hcd 0000:07:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 50 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 51 for MSI/MSI-X
xhci_hcd 0000:07:00.0: irq 52 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.6.11-1.fc17.x86_64 xhci_hcd
usb usb5: SerialNumber: 0000:07:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.6.11-1.fc17.x86_64 xhci_hcd
usb usb6: SerialNumber: 0000:07:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
USB Serial support registered for generic
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 13:220:140
acpi device:11: hash matches
rtc_cmos 00:06: setting system clock to 2013-01-17 18:07:09 UTC (1358446029)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
ata8: SATA link down (SStatus 0 SControl 330)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata7: SATA link down (SStatus 0 SControl 330)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040849d258), AE_NOT_FOUND (20120711/psparse-536)
ata4.00: ATAPI: TSSTcorp CDDVDW SH-S203P, SB00, max UDMA/100
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040849d258), AE_NOT_FOUND (20120711/psparse-536)
ata4.00: configured for UDMA/100
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88040849d168), AE_NOT_FOUND (20120711/psparse-536)
ata2.00: HPA detected: current 390719855, native 390721968
ata2.00: ATA-6: WDC WD2000JD-00HBC0, 08.02D08, max UDMA/133
ata2.00: 390719855 sectors, multi 16: LBA48
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88040849d0f0), AE_NOT_FOUND (20120711/psparse-536)
ata1.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
usb 1-1: new high-speed USB device number 2 using ehci_hcd
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88040849d168), AE_NOT_FOUND (20120711/psparse-536)
ata2.00: configured for UDMA/133
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88040849d0f0), AE_NOT_FOUND (20120711/psparse-536)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA WDC WD2000JD-00H 08.0 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
ACPI: Invalid Power Resource to register!
sd 1:0:0:0: [sdb] 390719855 512-byte logical blocks: (200 GB/186 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203P SB00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg2 type 5
ACPI: Invalid Power Resource to register!
ACPI: Invalid Power Resource to register![ 1.009045] sda: sda1 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 < sdb5 >
sd 1:0:0:0: [sdb] Attached SCSI disk
Freeing unused kernel memory: 1032k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1864k freed
Freeing unused kernel memory: 1416k freed
dracut: dracut-018-105.git20120927.fc17
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
dracut: rd.luks=0: removing cryptoluks activation
dracut: rd.lvm=0: removing LVM activation
udevd[174]: starting version 182
dracut: Starting plymouth daemon
usb 2-1: new high-speed USB device number 2 using ehci_hcd
dracut: rd.dm=0: removing DM RAID activation
dracut: rd.md=0: removing MD RAID activation
wmi: Mapper loaded
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
sym0: rev 0x1 at pci 0000:05:01.0 irq 18
sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym0: SCSI BUS has been reset.
scsi8 : sym-2.2.3
usb 5-1: new high-speed USB device number 2 using xhci_hcd
usb 5-1: New USB device found, idVendor=0409, idProduct=005a
usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 4 ports detected
usb 5-2: new low-speed USB device number 3 using xhci_hcd
sym1: rev 0x1 at pci 0000:05:01.1 irq 18
tsc: Refined TSC clocksource calibration: 3400.023 MHz
Switching to clocksource tsc
sym1: Symbios NVRAM, ID 7, Fast-80, SE, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: handling phase mismatch from SCRIPTS.
sym1: SCSI BUS has been reset.
scsi9 : sym-2.2.3
firewire_ohci 0000:05:00.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
usb 5-2: New USB device found, idVendor=046d, idProduct=c219
usb 5-2: New USB device strings: Mfr=3, Product=1, SerialNumber=0
usb 5-2: Product: Logitech Cordless RumblePad 2
usb 5-2: Manufacturer: Logitech
usb 5-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 5-2: ep 0x1 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Logitech Logitech Cordless RumblePad 2 as /devices/pci0000:00/0000:00:1c.7/0000:07:00.0/usb5/5-2/5-2:1.0/input/input3
logitech 0003:046D:C219.0001: input,hidraw0: USB HID v1.10 Gamepad [Logitech Logitech Cordless RumblePad 2] on usb-0000:07:00.0-2/input0
hid_logitech: Force feedback for Logitech force feedback devices by Johann Deneux
usb 1-1.3: new high-speed USB device number 3 using ehci_hcd
usb 1-1.3: New USB device found, idVendor=05e3, idProduct=070e
usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=2
usb 1-1.3: Product: USB Storage
usb 1-1.3: SerialNumber: 000000009602
Initializing USB Mass Storage driver...
scsi10 : usb-storage 1-1.3:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 2-1.6: new full-speed USB device number 3 using ehci_hcd
firewire_core 0000:05:00.2: created device fw0: GUID 00023c01510dca76, S400
usb 2-1.6: New USB device found, idVendor=2001, idProduct=f111
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.6: Product: D-Link DBT-122
usb 2-1.6: Manufacturer: Broadcom
usb 2-1.6: SerialNumber: 0015E97C0BED
usb 5-1.1: new low-speed USB device number 4 using xhci_hcd
usb 5-1.1: New USB device found, idVendor=056a, idProduct=0013
usb 5-1.1: New USB device strings: Mfr=1, Product=6, SerialNumber=0
usb 5-1.1: Product: CTE-430-UV3.1-4
usb 5-1.1: Manufacturer: WACOM
usb 5-1.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 5-1.2: new low-speed USB device number 5 using xhci_hcd
usb 5-1.2: New USB device found, idVendor=046d, idProduct=c050
usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.2: Product: USB-PS/2 Optical Mouse
usb 5-1.2: Manufacturer: Logitech
usb 5-1.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1c.7/0000:07:00.0/usb5/5-1/5-1.2/5-1.2:1.0/input/input4
hid-generic 0003:046D:C050.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:07:00.0-1.2/input0
scsi 10:0:0:0: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0
scsi 10:0:0:1: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0
scsi 10:0:0:2: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0
scsi 10:0:0:3: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0
scsi 8:0:1:0: Direct-Access MAXTOR ATLAS10K4_36WLS DFV0 PQ: 0 ANSI: 3
scsi target8:0:1: tagged command queuing enabled, command queue depth 16.
scsi target8:0:1: Beginning Domain Validation
scsi target8:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62)
scsi target8:0:1: Ending Domain Validation
sd 8:0:1:0: Attached scsi generic sg3 type 0
sd 8:0:1:0: [sdc] 71833096 512-byte logical blocks: (36.7 GB/34.2 GiB)
sd 8:0:1:0: [sdc] Write Protect is off
sd 8:0:1:0: [sdc] Mode Sense: ed 00 10 08
sd 8:0:1:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
sdc: sdc1 sdc2 sdc3
sd 8:0:1:0: [sdc] Attached SCSI disk
sd 10:0:0:0: Attached scsi generic sg4 type 0
sd 10:0:0:1: Attached scsi generic sg5 type 0
sd 10:0:0:2: Attached scsi generic sg6 type 0
sd 10:0:0:3: Attached scsi generic sg7 type 0
sd 10:0:0:0: [sdd] Attached SCSI removable disk
sd 10:0:0:1: [sde] Attached SCSI removable disk
sd 10:0:0:2: [sdf] Attached SCSI removable disk
sd 10:0:0:3: [sdg] Attached SCSI removable disk
EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
dracut: Mounted root filesystem /dev/sdc2
dracut: Switching root
SELinux: 2048 avtab hash slots, 103864 rules.
SELinux: 2048 avtab hash slots, 103864 rules.
SELinux: 9 users, 15 roles, 4229 types, 233 bools, 1 sens, 1024 cats
SELinux: 83 classes, 103864 rules
SELinux: Permission wake_alarm in class capability2 not defined in policy.
SELinux: Permission block_suspend in class capability2 not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev sdc2, type ext4), uses xattr
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
type=1403 audit(1358446039.730:2): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 282ms 746us.
systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
systemd[1]: Relabelled /dev and /run in 28ms 231us.
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
systemd[1]: systemd 44 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP; fedora)
systemd[1]: Set hostname to .
systemd-readahead-replay[391]: Bumped block_nr parameter of 8:32 to 16384. This is a temporary hack and should be removed one day.
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
EXT4-fs (sdc2): re-mounted. Opts: (null)
systemd-journald[399]: Fixed max_use=799.9M max_size=100.0M min_size=64.0K keep_free=399.9M
udevd[401]: starting version 182
systemd-journald[399]: Vacuuming...
type=1400 audit(1358438843.383:3): avc: denied { read } for pid=429 comm="sh" name="local" dev="sdc2" ino=1566753 scontext=system_u:system_r:loadkeys_t:s0 tcontext=system_u:object_r:usr_t:s0 tclass=lnk_file
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x12
microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x12
microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x12
microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x12
microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x12
microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x12
microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x12
microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x12
microcode: Microcode Update Driver: v2.00 , Peter Oruba
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 53 for MSI/MSI-X
mei 0000:00:16.0: wd: failed to find the client
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0[ 18.610297] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5
asus_wmi: Disabling ACPI video driver
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: irq 54 for MSI/MSI-X
r8169 0000:03:00.0: eth0: RTL8168f/8111f at 0xffffc90006234000, 10:bf:48:b7:83:6b, XID 08000800 IRQ 54
r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ACPI Warning: 0x000000000000f000-0x000000000000f01f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
gameport gameport0: EMU10K1 is pci0000:05:00.1/gameport0, io 0xc240, speed 455kHz
snd_hda_intel 0000:00:1b.0: irq 55 for MSI/MSI-X
ALSA sound/pci/hda/patch_realtek.c:1273 SKU: Nid=0x1d sku_cfg=0x4005e601
ALSA sound/pci/hda/patch_realtek.c:1275 SKU: port_connectivity=0x1
ALSA sound/pci/hda/patch_realtek.c:1276 SKU: enable_pcbeep=0x0
ALSA sound/pci/hda/patch_realtek.c:1277 SKU: check_sum=0x00000005
ALSA sound/pci/hda/patch_realtek.c:1278 SKU: customization=0x000000e6
ALSA sound/pci/hda/patch_realtek.c:1279 SKU: external_amp=0x0
ALSA sound/pci/hda/patch_realtek.c:1280 SKU: platform_type=0x0
ALSA sound/pci/hda/patch_realtek.c:1281 SKU: swap=0x0
ALSA sound/pci/hda/patch_realtek.c:1282 SKU: override=0x1
ALSA sound/pci/hda/hda_auto_parser.c:322 autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
ALSA sound/pci/hda/hda_auto_parser.c:326 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_auto_parser.c:330 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_auto_parser.c:331 mono: mono_out=0x0
ALSA sound/pci/hda/hda_auto_parser.c:334 dig-out=0x11/0x1e
ALSA sound/pci/hda/hda_auto_parser.c:335 inputs:
ALSA sound/pci/hda/hda_auto_parser.c:339 Rear Mic=0x18
ALSA sound/pci/hda/hda_auto_parser.c:339 Front Mic=0x19
ALSA sound/pci/hda/hda_auto_parser.c:339 Line=0x1a
ALSA sound/pci/hda/patch_realtek.c:1336 realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
ALSA sound/pci/hda/patch_realtek.c:1352 realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0889
ALSA sound/pci/emu10k1/emufx.c:1569 Installing spdif_bug patch: SB Audigy 2 ZS [SB0350]
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
hda_intel: Disabling MSI
ALSA sound/pci/hda/hda_intel.c:2595 0000:01:00.1: Handle VGA-switcheroo audio client
ALSA sound/pci/hda/hda_intel.c:1595 Enable delay in RIRB handling
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input14
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input15
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input16
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input17
input: Wacom Graphire3 as /devices/pci0000:00/0000:00:1c.7/0000:07:00.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input18
usbcore: registered new interface driver wacom
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.64 Tue Oct 30 10:58:20 PDT 2012
type=1400 audit(1358438849.990:4): avc: denied { mmap_zero } for pid=749 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect
Adding 6290428k swap on /dev/sdc3. Priority:0 extents:1 across:6290428k
EXT4-fs (sdb5): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev sdb5, type ext3), uses xattr
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev sda5, type ext3), uses xattr
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev sdc1, type ext4), uses xattr
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
r8169 0000:03:00.0: p4p1: link down
r8169 0000:03:00.0: p4p1: link down
IPv6: ADDRCONF(NETDEV_UP): p4p1: link is not ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
r8169 0000:03:00.0: p4p1: link up
IPv6: ADDRCONF(NETDEV_CHANGE): p4p1: link becomes ready
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
FS-Cache: Loaded
Key type dns_resolver registered
FS-Cache: Netfs 'nfs' registered for caching
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
SELinux: initialized (dev 0:34, type nfs), uses genfs_contexts
fuse init (API version 7.20)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
TCP: lp registered
supertuxkart[5230]: segfault at 1fffffffa ip 0000003a1d87f99c sp 00007ffff197ad18 error 4 in libc-2.15.so[3a1d800000+1ac000]
supertuxkart[7114]: segfault at 1ffffffea ip 000000000066f8ac sp 00007fff6f67d330 error 4 in supertuxkart[400000+7c6000]
type=1305 audit(1358449042.775:103): audit_pid=0 old=811 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
type=1130 audit(1358449042.777:104): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg=' comm="auditd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
type=1131 audit(1358449042.777:105): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg=' comm="auditd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
type=1305 audit(1358449042.800:106): audit_pid=10352 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1