dmesg - compilebench-redhat
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-220.el6.x86_64 (mockbuild@x86-004.build.bos.redhat.com) (gcc version 4.4.5 20110214 (Red Hat 4.4.5-6) (GCC) ) #1 SMP Wed Nov 9 08:03:13 EST 2011
Command line: ro root=/dev/mapper/VolGroup-lv_root nomodeset rd_NO_LUKS rd_NO_MD rd_LVM_LV=VolGroup/lv_swap quiet rhgb crashkernel=128M LANG=zh_CN.UTF-8 rd_LVM_LV=VolGroup/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 00000000cfeb2000 (usable)
BIOS-e820: 00000000cfeb2000 - 00000000cfec8000 (reserved)
BIOS-e820: 00000000cfec8000 - 00000000cfee7c00 (ACPI data)
BIOS-e820: 00000000cfee7c00 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
DMI 2.5 present.
SMBIOS version 2.5 @ 0xFCE70
DMI: Dell Inc. PowerEdge R200/0TY019, BIOS 1.2.1 03/05/2008
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0C0000000 mask FF0000000 write-back
3 base 100000000 mask FE0000000 write-back
4 base 120000000 mask FF0000000 write-back
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcfeb2 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000cfeb2000
0000000000 - 00cfe00000 page 2M
00cfe00000 - 00cfeb2000 page 4k
kernel direct mapping tables up to cfeb2000 @ 8000-e000
init_memory_mapping: 0000000100000000-0000000130000000
0100000000 - 0130000000 page 2M
kernel direct mapping tables up to 130000000 @ c000-12000
RAMDISK: 370cc000 - 37fefa0f
ACPI: RSDP 00000000000f2980 00024 (v02 DELL )
ACPI: XSDT 00000000000f2a08 00094 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 00000000000f2b20 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 00000000cfec8000 02545 (v01 DELL PE_SC3 00000001 INTL 20050624)
ACPI: FACS 00000000cfee7c00 00040
ACPI: APIC 00000000000f2c14 00072 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 00000000000f2c93 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 00000000000f2ce3 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 00000000000f2d1b 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WD__ 00000000000f2d57 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 00000000000f2e8b 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 00000000cfecb114 00210 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 00000000cfecb324 0027C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 00000000cfecaf94 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 00000000cfecafc4 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SSDT 00000000cfeca545 0036E (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 00000000cfeca9bb 0036E (v01 DELL PE_SC3 00000011 INTL 20050624)
ACPI: SSDT 00000000cfecae31 00162 (v01 DELL PE_SC3 00000010 INTL 20050624)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000130000000
Bootmem setup node 0 0000000000000000-0000000130000000
NODE_DATA [000000000000d000 - 0000000000040fff]
bootmap [0000000000041000 - 0000000000066fff] pages 26
(8 early reservations) ==> bootmem [0000000000 - 0130000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000200c7e4] TEXT DATA BSS ==> [0001000000 - 000200c7e4]
#3 [00370cc000 - 0037fefa0f] RAMDISK ==> [00370cc000 - 0037fefa0f]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [000200d000 - 000200d3a5] BRK ==> [000200d000 - 000200d3a5]
#6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
#7 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000]
found SMP MP-table at [ffff8800000fe710] fe710
Reserving 128MB of memory at 48MB for crashkernel (System RAM: 4864MB)
[ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00130000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x000000a0
0: 0x00000100 -> 0x000cfeb2
0: 0x00100000 -> 0x00130000
On node 0 totalpages: 1048145
DMA zone: 56 pages used for memmap
DMA zone: 104 pages reserved
DMA zone: 3839 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 833258 pages, LIFO batch:31
Normal zone: 2688 pages used for memmap
Normal zone: 193920 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 00000000cfeb2000 - 00000000cfec8000
PM: Registered nosave memory: 00000000cfec8000 - 00000000cfee7000
PM: Registered nosave memory: 00000000cfee7000 - 00000000cfee8000
PM: Registered nosave memory: 00000000cfee8000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880028200000 s92696 r8192 d21992 u524288
pcpu-alloc: s92696 r8192 d21992 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031017
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/VolGroup-lv_root nomodeset rd_NO_LUKS rd_NO_MD rd_LVM_LV=VolGroup/lv_swap quiet rhgb crashkernel=128M LANG=zh_CN.UTF-8 rd_LVM_LV=VolGroup/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 3903124k/4980736k available (5084k kernel code, 788156k absent, 289456k reserved, 7229k data, 1244k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:440
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 2600.269 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.53 BogoMIPS (lpj=2600269)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20776 entries in 82 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU E4700 @ 2.60GHz stepping 0b
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
Brought up 2 CPUs
Total of 2 processors activated (10400.58 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2616 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_._OSC] (Node ffff88012d699bf0), AE_NOT_FOUND
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xdc60-0xdc7f]
pci 0000:00:1d.1: reg 20 io port: [0xdc80-0xdc9f]
pci 0000:00:1d.2: reg 20 io port: [0xdca0-0xdcbf]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xdfcffc00-0xdfcfffff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e8 (mask 0003)
pci 0000:00:1f.2: reg 10 io port: [0xdc30-0xdc37]
pci 0000:00:1f.2: reg 14 io port: [0xdc28-0xdc2b]
pci 0000:00:1f.2: reg 18 io port: [0xdc38-0xdc3f]
pci 0000:00:1f.2: reg 1c io port: [0xdc2c-0xdc2f]
pci 0000:00:1f.2: reg 20 io port: [0xdc40-0xdc4f]
pci 0000:00:1f.2: reg 24 io port: [0xdc50-0xdc5f]
pci 0000:03:00.0: reg 10 64bit mmio: [0xdfdf0000-0xdfdfffff]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.4: bridge 32bit mmio: [0xdfd00000-0xdfdfffff]
pci 0000:04:00.0: reg 10 64bit mmio: [0xdfef0000-0xdfefffff]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.5: bridge 32bit mmio: [0xdfe00000-0xdfefffff]
pci 0000:05:05.0: reg 10 32bit mmio pref: [0xd0000000-0xd7ffffff]
pci 0000:05:05.0: reg 14 io port: [0xec00-0xecff]
pci 0000:05:05.0: reg 18 32bit mmio: [0xdfff0000-0xdfffffff]
pci 0000:05:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:05:05.0: supports D1 D2
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xdff00000-0xdfffffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd0000000-0xd7ffffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
pci0000:00: Requesting ACPI _OSC control (0x15)
pci0000:00: ACPI _OSC control (0x15) granted
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 *6 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:05:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:05:05.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:08: ioport range 0x800-0x87f has been reserved
system 00:08: ioport range 0x880-0x8bf has been reserved
system 00:08: ioport range 0x8c0-0x8df has been reserved
system 00:08: ioport range 0x8e0-0x8e3 has been reserved
system 00:08: ioport range 0x900-0x900 has been reserved
system 00:08: ioport range 0xc00-0xc0f has been reserved
system 00:08: ioport range 0xc10-0xc1f has been reserved
system 00:08: ioport range 0xca0-0xca7 has been reserved
system 00:08: ioport range 0xca9-0xcab has been reserved
system 00:08: ioport range 0xcad-0xcaf has been reserved
system 00:08: ioport range 0xc20-0xc3f has been reserved
system 00:09: ioport range 0xca8-0xca8 has been reserved
system 00:09: ioport range 0xcac-0xcac has been reserved
system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem disabled]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: bridge window [0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [0xd8000000-0xd81fffff]
pci 0000:00:1c.0: bridge window [0xd8200000-0xd83fffff]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.4: bridge window [io disabled]
pci 0000:00:1c.4: bridge window [0xdfd00000-0xdfdfffff]
pci 0000:00:1c.4: bridge window [mem pref disabled]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.5: bridge window [io disabled]
pci 0000:00:1c.5: bridge window [0xdfe00000-0xdfefffff]
pci 0000:00:1c.5: bridge window [mem pref disabled]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
pci 0000:00:1e.0: bridge window [0xe000-0xefff]
pci 0000:00:1e.0: bridge window [0xdff00000-0xdfffffff]
pci 0000:00:1e.0: bridge window [0xd0000000-0xd7ffffff]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:02: resource 1 mem: [0xd8000000-0xd81fffff]
pci_bus 0000:02: resource 2 pref mem [0xd8200000-0xd83fffff]
pci_bus 0000:03: resource 1 mem: [0xdfd00000-0xdfdfffff]
pci_bus 0000:04: resource 1 mem: [0xdfe00000-0xdfefffff]
pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
pci_bus 0000:05: resource 1 mem: [0xdff00000-0xdfffffff]
pci_bus 0000:05: resource 2 pref mem [0xd0000000-0xd7ffffff]
pci_bus 0000:05: resource 3 io: [0x00-0xffff]
pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:05:05.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15502k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1356487008.442:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7653
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 4BB1E63D18B42658
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.0:pcieffffffc4: HPC vendor_id 8086 device_id 2940 ss_vid 0 ss_did 0
pciehp 0000:00:1c.0:pcieffffffc4: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x220
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
ERST: Can not request iomem region for ERST.
GHES: APEI firmware first mode is enabled by WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 00:07: activated
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdfcffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-220.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000dc60
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-220.el6.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000dc80
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-220.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000dca0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-220.el6.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2012-12-26 01:56:49 UTC (1356487009)
Initalizing network drop monitor service
Freeing unused kernel memory: 1244k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1040k freed
Freeing unused kernel memory: 1760k freed
dracut: dracut-004-256.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: dm-devel@redhat.com
udev: starting version 147
[drm] Initialized drm 1.1.0 20060810
[drm] VGACON disable radeon kernel modesetting.
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
pci 0000:05:05.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] Initialized radeon 1.33.0 20080528 for 0000:05:05.0 on minor 0
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ata_piix 0000:00:1f.2: version 2.13
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
ata_piix 0000:00:1f.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
usb 1-5: new high speed USB device using ehci_hcd and address 2
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xdc30 ctl 0xdc28 bmdma 0xdc40 irq 23
ata2: SATA max UDMA/133 cmd 0xdc38 ctl 0xdc2c bmdma 0xdc48 irq 23
usb 1-5: New USB device found, idVendor=04b4, idProduct=6560
usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-5: configuration #1 chosen from 1 choice
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb 1-5.1: new low speed USB device using ehci_hcd and address 3
usb 1-5.1: New USB device found, idVendor=2101, idProduct=020f
usb 1-5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-5.1: configuration #1 chosen from 1 choice
input: HID 2101:020f as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.1/1-5.1:1.0/input/input2
generic-usb 0003:2101:020F.0001: input,hidraw0: USB HID v1.01 Keyboard [HID 2101:020f] on usb-0000:00:1d.7-5.1/input0
input: HID 2101:020f as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.1/1-5.1:1.1/input/input3
generic-usb 0003:2101:020F.0002: input,hidraw1: USB HID v1.01 Mouse [HID 2101:020f] on usb-0000:00:1d.7-5.1/input1
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: ST3250620NS, 3BKS, max UDMA/133
ata1.00: 488281250 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata1.01: ATAPI: TSSTcorpDVD-ROM TS-L333A, D100, max UDMA/33
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA ST3250620NS n/a PQ: 0 ANSI: 5
scsi 0:0:1:0: CD-ROM TSSTcorp DVD-ROM TS-L333A D100 PQ: 0 ANSI: 5
ata2.00: failed to resume link (SControl 0)
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link down (SStatus 0 SControl 0)
ata2.01: SATA link down (SStatus 0 SControl 0)
sr0: scsi3-mmc drive: 4x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: [sda] 488281250 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
dracut: Scanning devices sda2 for LVM logical volumes VolGroup/lv_swap VolGroup/lv_root
dracut: inactive '/dev/VolGroup/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/VolGroup/lv_home' [176.46 GiB] inherit
dracut: inactive '/dev/VolGroup/lv_swap' [5.88 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/VolGroup-lv_root
dracut: Loading SELinux policy
type=1404 audit(1356487012.936:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 225596 rules.
SELinux: 2048 avtab hash slots, 225596 rules.
SELinux: 9 users, 12 roles, 3576 types, 179 bools, 1 sens, 1024 cats
SELinux: 81 classes, 225596 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1356487013.561:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
readahead: starting
udev: starting version 147
tg3.c:v3.119 (May 18, 2011)
tg3 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
tg3 0000:03:00.0: setting latency timer to 64
tg3 0000:03:00.0: eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:21:9b:fa:f5:d2
tg3 0000:03:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:03:00.0: eth0: RXcsums[0] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:04:00.0: setting latency timer to 64
tg3 0000:04:00.0: eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:21:9b:fa:f5:d3
tg3 0000:04:00.0: eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:04:00.0: eth1: RXcsums[0] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:04:00.0: eth1: dma_rwctrl[76180000] dma_mask[64-bit]
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
EDAC MC: Ver: 2.1.0 Nov 9 2011
EDAC MC0: Giving out device to 'i3200_edac' 'i3200': DEV 0000:00:00.0
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
microcode: CPU0 sig=0x6fb, pf=0x1, revision=0xb6
platform microcode: firmware: requesting intel-ucode/06-0f-0b
microcode: CPU1 sig=0x6fb, pf=0x1, revision=0xb6
platform microcode: firmware: requesting intel-ucode/06-0f-0b
Microcode Update Driver: v2.00 , Peter Oruba
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 0:0:1:0: Attached scsi generic sg1 type 5
microcode: CPU0 updated to revision 0xba, date = 2010-10-03
microcode: CPU1 updated to revision 0xba, date = 2010-10-03
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda1, type ext4), uses xattr
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev dm-2, type ext4), uses xattr
Adding 6160376k swap on /dev/mapper/VolGroup-lv_swap. Priority:-1 extents:1 across:6160376k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
tg3 0000:03:00.0: irq 28 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
tg3 0000:04:00.0: irq 29 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth1: link is not ready
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex
tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
eth0: no IPv6 routers present
type=1400 audit(1356487071.853:4): avc: denied { read } for pid=1955 comm="gdm-session-wor" name="root" dev=dm-0 ino=262145 scontext=system_u:system_r:xdm_t:s0-s0:c0.c1023 tcontext=system_u:object_r:admin_home_t:s0 tclass=dir
fuse init (API version 7.13)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
tg3 0000:03:00.0: eth0: Link is down
tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex
tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX
lo: Disabled Privacy Extensions
lo: Disabled Privacy Extensions
usb 1-5.2: new high speed USB device using ehci_hcd and address 4
usb 1-5.2: New USB device found, idVendor=0781, idProduct=5567
usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5.2: Product: Cruzer Blade
usb 1-5.2: Manufacturer: SanDisk
usb 1-5.2: SerialNumber: 200443184307B1711D44
usb 1-5.2: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 2:0:0:0: Direct-Access SanDisk Cruzer Blade 1.10 PQ: 0 ANSI: 2
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdb] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI removable disk
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts