dmesg - compilationtest
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.6.10-custom (root@debian) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Sat Dec 15 14:25:13 MSK 2012
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000096e3efff] usable
BIOS-e820: [mem 0x0000000096e3f000-0x0000000096ebefff] reserved
BIOS-e820: [mem 0x0000000096ebf000-0x0000000096fbefff] ACPI NVS
BIOS-e820: [mem 0x0000000096fbf000-0x0000000096ffefff] ACPI data
BIOS-e820: [mem 0x0000000096fff000-0x0000000096ffffff] usable
BIOS-e820: [mem 0x0000000097000000-0x000000009f9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000015fdfffff] usable
NX (Execute Disable) protection: active
DMI 2.7 present.
DMI: Acer Aspire 5830TG/JM50_HR, BIOS V1.05 06/08/2011
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x15fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FE0000000 write-back
2 base 097000000 mask FFF000000 uncachable
3 base 098000000 mask FF8000000 uncachable
4 base 0FFC00000 mask FFFC00000 write-protect
5 base 100000000 mask FC0000000 write-back
6 base 140000000 mask FF0000000 write-back
7 base 150000000 mask FF0000000 write-back
8 base 15FE00000 mask FFFE00000 uncachable
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x97000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000096000] 96000 size 28672
init_memory_mapping: [mem 0x00000000-0x96ffffff]
[mem 0x00000000-0x96ffffff] page 2M
kernel direct mapping tables up to 0x96ffffff @ [mem 0x1fffc000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x15fdfffff]
[mem 0x100000000-0x15fdfffff] page 2M
kernel direct mapping tables up to 0x15fdfffff @ [mem 0x96e3c000-0x96e3efff]
RAMDISK: [mem 0x375ed000-0x37feffff]
ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS)
ACPI: XSDT 0000000096ffe120 00084 (v01 ACRSYS ACRPRDCT 00000001 01000013)
ACPI: FACP 0000000096ffc000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: DSDT 0000000096fef000 0918D (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
ACPI: FACS 0000000096f6d000 00040
ACPI: ASF! 0000000096ffd000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: HPET 0000000096ffb000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: APIC 0000000096ffa000 0008C (v02 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: MCFG 0000000096ff9000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SLIC 0000000096fee000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 0000000096fed000 00BC2 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: BOOT 0000000096feb000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: ASPT 0000000096fe8000 00034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 0000000096fe7000 007C2 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 0000000096fe6000 00996 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 0000000096fe1000 04B40 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000015fdfffff]
Initmem setup node 0 [mem 0x00000000-0x15fdfffff]
NODE_DATA [mem 0x15fdfc000-0x15fdfffff]
[ffffea0000000000-ffffea00057fffff] PMD -> [ffff88015b600000-ffff88015f3fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x15fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0x96e3efff]
node 0: [mem 0x96fff000-0x96ffffff]
node 0: [mem 0x100000000-0x15fdfffff]
On node 0 totalpages: 1010637
DMA zone: 64 pages used for memmap
DMA zone: 7 pages reserved
DMA zone: 3910 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 597632 pages, LIFO batch:31
Normal zone: 6136 pages used for memmap
Normal zone: 386568 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000096e3f000 - 0000000096ebf000
PM: Registered nosave memory: 0000000096ebf000 - 0000000096fbf000
PM: Registered nosave memory: 0000000096fbf000 - 0000000096fff000
PM: Registered nosave memory: 0000000097000000 - 000000009fa00000
PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88015fa00000 s83008 r8192 d23488 u262144
pcpu-alloc: s83008 r8192 d23488 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 988110
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3893388k/5765120k available (3468k kernel code, 1722572k absent, 149160k reserved, 3175k data, 592k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
NR_IRQS:33024 nr_irqs:744 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2394.650 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.30 BogoMIPS (lpj=9578600)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift is 0x5
ACPI: Core revision 20120711
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz stepping 07
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
smpboot: Booting Node 0, Processors #1 #2 #3
Brought up 4 CPUs
smpboot: Total of 4 processors activated (19157.20 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x96ebf000-0x96fbefff] (1048576 bytes)
dummy:
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 0000000096e70718 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0067C (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
ACPI: SSDT 0000000096e71a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
ACPI: SSDT 0000000096e6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
PCI host bridge to bus 0000:00
pci_bus 0000:00: busn_res: [bus 00-fe] is inserted under domain [bus 00-ff]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xd1400000-0xd17fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xd1c04000-0xd1c0400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xd1c0a000-0xd1c0a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xd1c00000-0xd1c03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xd1c09000-0xd1c093ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0x4098-0x409f]
pci 0000:00:1f.2: reg 14: [io 0x40bc-0x40bf]
pci 0000:00:1f.2: reg 18: [io 0x4090-0x4097]
pci 0000:00:1f.2: reg 1c: [io 0x40b8-0x40bb]
pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
pci 0000:00:1f.2: reg 24: [mem 0xd1c08000-0xd1c087ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xd1c06000-0xd1c060ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x4040-0x405f]
pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-fe]
pci 0000:01:00.0: [10de:0df4] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd0ffffff]
pci 0000:01:00.0: reg 14: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0x3000-0x307f]
pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd10fffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-fe]
pci 0000:02:00.0: [1969:1083] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [mem 0xd1b00000-0xd1b3ffff 64bit]
pci 0000:02:00.0: reg 18: [io 0x2000-0x207f]
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xd1b00000-0xd1bfffff]
pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-fe]
pci 0000:03:00.0: [168c:002e] type 00 class 0x028000
pci 0000:03:00.0: reg 10: [mem 0xd1a00000-0xd1a0ffff 64bit]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xd1a00000-0xd1afffff]
pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 00-fe]
pci 0000:04:00.0: [10ec:5209] type 00 class 0xff0000
pci 0000:04:00.0: reg 10: [mem 0xd1901000-0xd1901fff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D1 D2 D3hot
pci 0000:04:00.1: [10ec:5209] type 00 class 0x080500
pci 0000:04:00.1: reg 10: [mem 0xd1900000-0xd19000ff]
pci 0000:04:00.1: supports D1 D2
pci 0000:04:00.1: PME# supported from D1 D2 D3hot
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [mem 0xd1900000-0xd19fffff]
pci_bus 0000:05: busn_res: [bus 05] is inserted under [bus 00-fe]
pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:05:00.0: reg 10: [mem 0xd1800000-0xd1801fff 64bit]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [mem 0xd1800000-0xd18fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
_OSC request data:1 1f 1f
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0x96e3f000-0x97ffffff]
e820: reserve RAM buffer [mem 0x97000000-0x97ffffff]
e820: reserve RAM buffer [mem 0x15fe00000-0x15fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-fe]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0x9fa00000-0xfeafffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0000-0x001f]
pnp 00:01: [io 0x0081-0x0091]
pnp 00:01: [io 0x0093-0x009f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [mem 0xff000000-0xffffffff]
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io 0x00f0]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io 0x002e-0x002f]
pnp 00:05: [io 0x004e-0x004f]
pnp 00:05: [io 0x0061]
pnp 00:05: [io 0x0063]
pnp 00:05: [io 0x0065]
pnp 00:05: [io 0x0067]
pnp 00:05: [io 0x0068]
pnp 00:05: [io 0x006c]
pnp 00:05: [io 0x0070]
pnp 00:05: [io 0x0080]
pnp 00:05: [io 0x0092]
pnp 00:05: [io 0x00b2-0x00b3]
pnp 00:05: [io 0x0680-0x069f]
pnp 00:05: [io 0xff2c-0xff2f]
pnp 00:05: [io 0x1000-0x100f]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0x0400-0x047f]
pnp 00:05: [io 0x0500-0x057f]
pnp 00:05: [io 0x164e-0x164f]
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0xff2c-0xff2f] has been reserved
system 00:05: [io 0x1000-0x100f] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x0400-0x047f] has been reserved
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [io 0x0070-0x0077]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io 0x0454-0x0457]
system 00:07: [io 0x0454-0x0457] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs ETD0500 PNP0f13 (active)
pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0a: [mem 0xfed10000-0xfed17fff]
pnp 00:0a: [mem 0xfed18000-0xfed18fff]
pnp 00:0a: [mem 0xfed19000-0xfed19fff]
pnp 00:0a: [mem 0xe0000000-0xefffffff]
pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
pnp 00:0a: [mem 0xfed90000-0xfed93fff]
pnp 00:0a: [mem 0xff000000-0xffffffff]
pnp 00:0a: [mem 0xfee00000-0xfeefffff]
pnp 00:0a: [mem 0x9fa00000-0x9fa00fff]
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: [mem 0x9fa00000-0x9fa00fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0x20000000-0x201fffff]
pnp 00:0b: [mem 0x40000000-0x401fffff]
system 00:0b: [mem 0x20000000-0x201fffff] could not be reserved
system 00:0b: [mem 0x40000000-0x401fffff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xd1000000-0xd107ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd10fffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xd1b00000-0xd1bfffff]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xd1a00000-0xd1afffff]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [mem 0xd1900000-0xd19fffff]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [mem 0xd1800000-0xd18fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd10fffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xd1b00000-0xd1bfffff]
pci_bus 0000:03: resource 1 [mem 0xd1a00000-0xd1afffff]
pci_bus 0000:04: resource 1 [mem 0xd1900000-0xd19fffff]
pci_bus 0000:05: resource 1 [mem 0xd1800000-0xd18fffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 10252k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x92e3c000-0x96e3bfff] (64MB) mapped at [ffff880092e3c000-ffff880096e3bfff]
Simple Boot Flag at 0x44 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1355871920.824:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7624
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2012-12-18 23:05:21 UTC (1355871921)
Freeing unused kernel memory: 592k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 616k freed
Freeing unused kernel memory: 804k freed
udev[59]: starting version 164
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:04:00.1: SDHCI controller found [10ec:5209] (rev 1)
sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
mmc0: no vmmc regulator found
sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Registered led device: mmc0::
SCSI subsystem initialized
ACPI: bus type scsi registered
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd1c0a000
libata version 3.00 loaded.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.6.10-custom ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xd1c09000
mmc0: SDHCI controller on PCI [0000:04:00.1] using DMA
sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
atl1c 0000:02:00.0: version 1.0.1.0-NAPI
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.6.10-custom ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd1c08000 port 0xd1c08100 irq 41
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xd1c08000 port 0xd1c08200 irq 41
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
usb 1-1: new high-speed USB device number 2 using ehci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: TOSHIBA MK5059GSXP, GN003J, max UDMA/100
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK5059GS GN00 PQ: 0 ANSI: 5
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: MATSHITADVD-RAM UJ8A2AS, 1.00, max UDMA/100
ata3.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8A2AS 1.00 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
usb 1-1.3: new high-speed USB device number 3 using ehci_hcd
tsc: Refined TSC clocksource calibration: 2394.565 MHz
Switching to clocksource tsc
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 2:0:0:0: Attached scsi generic sg1 type 5
usb 1-1.3: New USB device found, idVendor=1bcf, idProduct=288a
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: Product: 1.3M HD WebCam
usb 1-1.3: Manufacturer: BRB9S0VTC
usb 2-1.1: new high-speed USB device number 3 using ehci_hcd
usb 2-1.1: New USB device found, idVendor=12d1, idProduct=140c
usb 2-1.1: New USB device strings: Mfr=3, Product=2, SerialNumber=0
usb 2-1.1: Product: HUAWEI Mobile
usb 2-1.1: Manufacturer: HUAWEI Technology
Initializing USB Mass Storage driver...
scsi10 : usb-storage 2-1.1:1.4
scsi11 : usb-storage 2-1.1:1.5
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PM: Starting manual resume from disk
PM: Hibernation image partition 8:6 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
scsi 10:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
scsi 11:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
sr1: scsi-1 drive
sr 10:0:0:0: Attached scsi CD-ROM sr1
sr 10:0:0:0: Attached scsi generic sg2 type 5
sd 11:0:0:0: Attached scsi generic sg3 type 0
sd 11:0:0:0: [sdb] Attached SCSI removable disk
udev[375]: starting version 164
wmi: Mapper loaded
input: PC Speaker as /devices/platform/pcspkr/input/input1
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x17
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
USB Serial support registered for generic
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:05:00.0: irq 19, io mem 0xd1800000
xhci_hcd 0000:05:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 46 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.6.10-custom xhci_hcd
usb usb3: SerialNumber: 0000:05:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.6.10-custom xhci_hcd
usb usb4: SerialNumber: 0000:05:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Requesting acpi_cpufreq
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-3 state
ACPI: acpi_idle registered with cpuidle
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x17
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x17
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x17
microcode: Microcode Update Driver: v2.00 , Peter Oruba
usbcore: registered new interface driver option
USB Serial support registered for GSM modem (1-port)
option 2-1.1:1.0: GSM modem (1-port) converter detected
usb 2-1.1: GSM modem (1-port) converter now attached to ttyUSB0
option 2-1.1:1.1: GSM modem (1-port) converter detected
usb 2-1.1: GSM modem (1-port) converter now attached to ttyUSB1
option 2-1.1:1.2: GSM modem (1-port) converter detected
usb 2-1.1: GSM modem (1-port) converter now attached to ttyUSB2
option 2-1.1:1.3: GSM modem (1-port) converter detected
usb 2-1.1: GSM modem (1-port) converter now attached to ttyUSB3
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input4
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
ACPI: Invalid Power Resource to register!
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20120711/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f01)
ACPI Warning: 0x0000000000004040-0x000000000000405f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: Function bitmap for Communication Button: 0x801
acer_wmi: Brightness must be controlled by acpi video driver
input: Acer WMI hotkeys as /devices/virtual/input/input6
input: Acer BMA150 accelerometer as /devices/virtual/input/input7
psmouse serio1: elantech: Synaptics capabilities query result 0x68, 0x15, 0x0a.
[drm] Initialized drm 1.1.0 20060810
cfg80211: Calling CRDA to update world regulatory domain
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input8
usb 1-1.6: new full-speed USB device number 4 using ehci_hcd
MXM: GUID detected in BIOS
VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[drm] nouveau 0000:01:00.0: Detected an NVc0 generation card (0x0c1a00a1)
[drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[drm] nouveau 0000:01:00.0: ... BIOS signature not found
[drm] nouveau 0000:01:00.0: Checking PROM for VBIOS
[drm] nouveau 0000:01:00.0: ... BIOS signature not found
[drm] nouveau 0000:01:00.0: Checking ACPI for VBIOS
usb 1-1.6: New USB device found, idVendor=0489, idProduct=e03c
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.6: Product: Bluetooth USB Host Controller
usb 1-1.6: Manufacturer: Atheros Communications
usb 1-1.6: SerialNumber: Alaska Day 2006
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0
ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90010fc0000, irq=17
snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
hda_codec: CX20588: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: Using VBIOS from ACPI
[drm] nouveau 0000:01:00.0: BIT BIOS found
[drm] nouveau 0000:01:00.0: Bios version 70.08.45.00
[drm] nouveau 0000:01:00.0: TMDS table version 2.0
[drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[drm] nouveau 0000:01:00.0: DCB version 4.0
[drm] nouveau 0000:01:00.0: DCB outp 00: 02010300 00000000
[drm] nouveau 0000:01:00.0: DCB conn 00: 00000000
[drm] nouveau 0000:01:00.0: Adaptor not initialised, running VBIOS init tables.
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD56E
[drm] nouveau 0000:01:00.0: 0xD518: i2c wr fail: -6
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDBBD
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEDC3
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEDC7
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEEAF
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEF14
[TTM] Zone kernel: Available graphics memory: 1952826 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] nouveau 0000:01:00.0: Detected 512MiB VRAM (DDR3)
[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
[drm] nouveau 0000:01:00.0: 3 available performance level(s)
[drm] nouveau 0000:01:00.0: 0: core 50MHz shader 101MHz memory 135MHz voltage 830mV
[drm] nouveau 0000:01:00.0: 1: core 202MHz shader 405MHz memory 324MHz voltage 830mV
[drm] nouveau 0000:01:00.0: 3: core 672MHz shader 1344MHz memory 900MHz voltage 980mV
[drm] nouveau 0000:01:00.0: c: core 202MHz shader 405MHz memory 324MHz voltage 980mV
[drm] nouveau 0000:01:00.0: MM: using COPY1 for buffer copies
[drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x120000, bo ffff8801585e2000
[drm] nouveau 0000:01:00.0: no native mode, forcing panel scaling
Console: switching to colour frame buffer device 128x48
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
Adding 5743612k swap on /dev/sda6. Priority:-1 extents:1 across:5743612k
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
loop: module loaded
fuse init (API version 7.20)
input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
atl1c 0000:02:00.0: irq 48 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
pci 0000:00:00.0: Intel Sandybridge Chipset
pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
pci 0000:00:00.0: detected 131072K stolen memory
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 49 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
fbcon: inteldrmfb (fb1) is primary device
fbcon: Remapping primary device, fb1, to tty 1-63
fb1: inteldrmfb frame buffer device
lp: driver loaded but no devices found
acpi device:30: registered as cooling_device4
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input14
ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20120711/video-1149)
ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20120711/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff88015aa6c3e8), AE_NOT_FOUND (20120711/psparse-536)
ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:36/LNXVIDEO:01/input/input15
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
ppdev: user-space parallel port driver
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
usb 2-1.3: new high-speed USB device number 4 using ehci_hcd
usb 2-1.3: New USB device found, idVendor=0951, idProduct=1602
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3: Product: DataTravelerMini
usb 2-1.3: Manufacturer: Kingston
usb 2-1.3: SerialNumber: 5B7618000A85
scsi12 : usb-storage 2-1.3:1.0
usb 2-1.3: USB disconnect, device number 4
usb 2-1.3: new high-speed USB device number 5 using ehci_hcd
usb 2-1.3: New USB device found, idVendor=0951, idProduct=1602
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3: Product: DataTravelerMini
usb 2-1.3: Manufacturer: Kingston
usb 2-1.3: SerialNumber: 5B7618000A85
scsi13 : usb-storage 2-1.3:1.0
scsi 13:0:0:0: Direct-Access Kingston DataTravelerMini PMAP PQ: 0 ANSI: 0 CCS
sd 13:0:0:0: Attached scsi generic sg4 type 0
sd 13:0:0:0: [sdc] 4030464 512-byte logical blocks: (2.06 GB/1.92 GiB)
sd 13:0:0:0: [sdc] Write Protect is off
sd 13:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 13:0:0:0: [sdc] No Caching mode page present
sd 13:0:0:0: [sdc] Assuming drive cache: write through
sd 13:0:0:0: [sdc] No Caching mode page present
sd 13:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 13:0:0:0: [sdc] No Caching mode page present
sd 13:0:0:0: [sdc] Assuming drive cache: write through
sd 13:0:0:0: [sdc] Attached SCSI removable disk
FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Core temperature/speed normal
CPU1: Core temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU3: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU1: Core temperature above threshold, cpu clock throttled (total events = 73)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 73)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 73)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 73)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 73)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 73)
CPU1: Core temperature/speed normal
CPU3: Package temperature/speed normal
CPU0: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU3: Core temperature above threshold, cpu clock throttled (total events = 51)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 286)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 286)
CPU2: Core temperature above threshold, cpu clock throttled (total events = 51)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 286)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 286)
CPU3: Core temperature/speed normal
CPU1: Package temperature/speed normal
CPU2: Core temperature/speed normal
CPU0: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU3: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
CPU0: Core temperature above threshold, cpu clock throttled (total events = 265)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 265)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 321)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 321)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 321)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 321)
CPU0: Core temperature/speed normal
CPU1: Core temperature/speed normal
CPU3: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU1: Core temperature above threshold, cpu clock throttled (total events = 386)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 386)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 442)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 442)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 442)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 442)
CPU1: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU1: Core temperature above threshold, cpu clock throttled (total events = 783)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 783)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 839)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 839)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 839)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 839)
CPU1: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU2: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged