dmesg - 420wkngrphcs285
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-220.23.1.el6.x86_64 (mockbuild@c6b5.bsys.dev.centos.org) (gcc version 4.4.6 20110731 (Red Hat 4.4.6-3) (GCC) ) #1 SMP Mon Jun 18 18:58:52 BST 2012
Command line: ro root=/dev/mapper/vg_embassy420-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=vg_embassy420/lv_root rd_NO_MD rd_LVM_LV=vg_embassy420/lv_swap SYSFONT=latarcyrheb-sun16 rhgb quiet KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rdblacklist=nouveau nouveau.modeset=0 crashkernel=auto
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000ddfcd000 (usable)
BIOS-e820: 00000000ddfcd000 - 00000000de5d4000 (reserved)
BIOS-e820: 00000000de5d4000 - 00000000de828000 (ACPI NVS)
BIOS-e820: 00000000de828000 - 00000000de835000 (ACPI data)
BIOS-e820: 00000000de835000 - 00000000de854000 (ACPI NVS)
BIOS-e820: 00000000de854000 - 00000000de859000 (ACPI data)
BIOS-e820: 00000000de859000 - 00000000de89c000 (ACPI NVS)
BIOS-e820: 00000000de89c000 - 00000000decac000 (usable)
BIOS-e820: 00000000decac000 - 00000000deff4000 (reserved)
BIOS-e820: 00000000deff4000 - 00000000df000000 (usable)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000081f000000 (usable)
DMI 2.7 present.
SMBIOS version 2.7 @ 0xF0480
DMI: System manufacturer System Product Name/P8Z77-V LE, BIOS 0316 02/14/2012
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x81f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask 800000000 write-back
1 base 800000000 mask FF0000000 write-back
2 base 810000000 mask FF8000000 write-back
3 base 818000000 mask FFC000000 write-back
4 base 81C000000 mask FFE000000 write-back
5 base 81E000000 mask FFF000000 write-back
6 base 0E0000000 mask FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 32GB, type WB
reg 1, base: 32GB, range: 256MB, type WB
reg 2, base: 33024MB, range: 128MB, type WB
reg 3, base: 33152MB, range: 64MB, type WB
reg 4, base: 33216MB, range: 32MB, type WB
reg 5, base: 33248MB, range: 16MB, type WB
reg 6, base: 3584MB, range: 512MB, type UC
total RAM covered: 32752M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 8 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 16GB, type WB
reg 6, base: 32GB, range: 512MB, type WB
reg 7, base: 33264MB, range: 16MB, type UC
e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xdf000 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000df000000
0000000000 - 00df000000 page 2M
kernel direct mapping tables up to df000000 @ 10000-15000
init_memory_mapping: 0000000100000000-000000081f000000
0100000000 - 081f000000 page 2M
kernel direct mapping tables up to 81f000000 @ 13000-35000
RAMDISK: 370be000 - 37fef7b9
ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
ACPI: XSDT 00000000de828070 00064 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000de8327f0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000de828168 0A683 (v02 ALASKA A M I 00000015 INTL 20051117)
ACPI: FACS 00000000de852f80 00040
ACPI: APIC 00000000de8328e8 00092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000de832980 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000de8329c0 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000de8329f8 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 00000000de832d68 009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000de833718 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: DMAR 00000000de8341b0 00080 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000081f000000
Bootmem setup node 0 0000000000000000-000000081f000000
NODE_DATA [0000000000030000 - 0000000000063fff]
bootmap [0000000000100000 - 0000000000203dff] pages 104
(8 early reservations) ==> bootmem [0000000000 - 081f000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000200c864] TEXT DATA BSS ==> [0001000000 - 000200c864]
#3 [00370be000 - 0037fef7b9] RAMDISK ==> [00370be000 - 0037fef7b9]
#4 [000009d400 - 0000100000] BIOS reserved ==> [000009d400 - 0000100000]
#5 [000200d000 - 000200d40e] BRK ==> [000200d000 - 000200d40e]
#6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
#7 [0000013000 - 0000030000] PGTABLE ==> [0000013000 - 0000030000]
found SMP MP-table at [ffff8800000fcd20] fcd20
Reserving 131MB of memory at 48MB for crashkernel (System RAM: 33264MB)
[ffffea0000000000-ffffea000effffff] PMD -> [ffff880028600000-ffff880036ffffff] on node 0
[ffffea000f000000-ffffea001c7fffff] PMD -> [ffff880038000000-ffff8800457fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0081f000
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x000ddfcd
0: 0x000de89c -> 0x000decac
0: 0x000deff4 -> 0x000df000
0: 0x00100000 -> 0x0081f000
On node 0 totalpages: 8377206
DMA zone: 56 pages used for memmap
DMA zone: 133 pages reserved
DMA zone: 3792 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 891937 pages, LIFO batch:31
Normal zone: 102088 pages used for memmap
Normal zone: 7364920 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000ddfcd000 - 00000000de5d4000
PM: Registered nosave memory: 00000000de5d4000 - 00000000de828000
PM: Registered nosave memory: 00000000de828000 - 00000000de835000
PM: Registered nosave memory: 00000000de835000 - 00000000de854000
PM: Registered nosave memory: 00000000de854000 - 00000000de859000
PM: Registered nosave memory: 00000000de859000 - 00000000de89c000
PM: Registered nosave memory: 00000000decac000 - 00000000deff4000
PM: Registered nosave memory: 00000000df000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at df000000 (gap: df000000:19000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880028200000 s92632 r8192 d22056 u262144
pcpu-alloc: s92632 r8192 d22056 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8260649
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg_embassy420-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=vg_embassy420/lv_root rd_NO_MD rd_LVM_LV=vg_embassy420/lv_swap SYSFONT=latarcyrheb-sun16 rhgb quiet KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rdblacklist=nouveau nouveau.modeset=0 crashkernel=131M@0M
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Queued invalidation will be enabled to support x2apic and Intr-remapping.
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 32814232k/34062336k available (5086k kernel code, 553512k absent, 694592k reserved, 7227k data, 1244k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:472
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 268435456 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3502.607 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 7005.21 BogoMIPS (lpj=3502607)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20793 entries in 82 pages
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
IOMMU fed90000: ver 1:0 cap c9008020660262 ecap f0105a
DMAR: RMRR base: 0x000000de54b000 end: 0x000000de567fff
DMAR: No ATSR found
IOAPIC id 2 under DRHD base 0xfed90000
HPET id 0 under DRHD base 0xfed90000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Setting APIC routing to cluster x2apic
alloc irq_desc for 24 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz stepping 09
Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (56037.28 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2616 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG at f8000000 - fbffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI Error (psargs-0359): [RAMB] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20090903/nsinit-347)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: No dock devices found.
HEST: Table not found.
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:14.0: reg 10 64bit mmio: [0xf7400000-0xf740ffff]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: PME# disabled
pci 0000:00:16.0: reg 10 64bit mmio: [0xf741a000-0xf741a00f]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: reg 10 32bit mmio: [0xf7418000-0xf74183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7410000-0xf7413fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10 32bit mmio: [0xf7417000-0xf74173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0xf070-0xf077]
pci 0000:00:1f.2: reg 14 io port: [0xf060-0xf063]
pci 0000:00:1f.2: reg 18 io port: [0xf050-0xf057]
pci 0000:00:1f.2: reg 1c io port: [0xf040-0xf043]
pci 0000:00:1f.2: reg 20 io port: [0xf020-0xf03f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xf7416000-0xf74167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xf7415000-0xf74150ff]
pci 0000:00:1f.3: reg 20 io port: [0xf000-0xf01f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xf4000000-0xf5ffffff]
pci 0000:01:00.0: reg 24 io port: [0xe000-0xe07f]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0xf7000000-0xf707ffff]
pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
pci 0000:00:01.0: bridge 32bit mmio: [0xf4000000-0xf70fffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
pci 0000:02:00.0: reg 10 64bit mmio pref: [0xf0200000-0xf03fffff]
pci 0000:02:00.0: reg 20 64bit mmio pref: [0xf0404000-0xf0407fff]
pci 0000:02:00.0: reg 30 32bit mmio pref: [0xf7380000-0xf73fffff]
pci 0000:02:00.0: PME# supported from D0 D3hot
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.0: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:02:00.0: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:02:00.1: reg 10 64bit mmio pref: [0xf0000000-0xf01fffff]
pci 0000:02:00.1: reg 20 64bit mmio pref: [0xf0400000-0xf0403fff]
pci 0000:02:00.1: reg 30 32bit mmio pref: [0xf7300000-0xf737ffff]
pci 0000:02:00.1: PME# supported from D0 D3hot
pci 0000:02:00.1: PME# disabled
pci 0000:02:00.1: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:02:00.1: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xf7300000-0xf73fffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf04fffff]
pci 0000:00:1c.5: transparent bridge
pci 0000:03:00.0: transparent bridge
pci 0000:05:00.0: reg 10 io port: [0xd090-0xd097]
pci 0000:05:00.0: reg 14 io port: [0xd080-0xd083]
pci 0000:05:00.0: reg 18 io port: [0xd070-0xd077]
pci 0000:05:00.0: reg 1c io port: [0xd060-0xd063]
pci 0000:05:00.0: reg 20 io port: [0xd050-0xd05f]
pci 0000:05:00.0: reg 24 32bit mmio: [0xf7215000-0xf72157ff]
pci 0000:05:00.0: reg 30 32bit mmio pref: [0xf7200000-0xf720ffff]
pci 0000:05:00.0: PME# supported from D3hot
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.6: bridge io port: [0xd000-0xdfff]
pci 0000:00:1c.6: bridge 32bit mmio: [0xf7200000-0xf72fffff]
pci 0000:06:00.0: reg 10 64bit mmio: [0xf7100000-0xf7107fff]
pci 0000:06:00.0: PME# supported from D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.7: bridge 32bit mmio: [0xf7100000-0xf71fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06.P9PE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
_OSC request data:1 1f 1f
pci0000:00: Requesting ACPI _OSC control (0x1d)
_OSC request data:1 0 1d
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
system 00:05: ioport range 0x680-0x69f has been reserved
system 00:05: ioport range 0x200-0x20f has been reserved
system 00:05: ioport range 0xffff-0xffff has been reserved
system 00:05: ioport range 0xffff-0xffff has been reserved
system 00:05: ioport range 0x400-0x453 has been reserved
system 00:05: ioport range 0x458-0x47f has been reserved
system 00:05: ioport range 0x500-0x57f has been reserved
system 00:05: ioport range 0x164e-0x164f has been reserved
system 00:07: ioport range 0x454-0x457 has been reserved
system 00:08: ioport range 0x290-0x29f has been reserved
system 00:09: ioport range 0x4d0-0x4d1 has been reserved
system 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:0b: iomem range 0xfed10000-0xfed17fff has been reserved
system 00:0b: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:0b: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:0b: iomem range 0xf8000000-0xfbffffff has been reserved
system 00:0b: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:0b: iomem range 0xfed90000-0xfed93fff has been reserved
system 00:0b: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:0b: iomem range 0xff000000-0xffffffff has been reserved
system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:0b: iomem range 0xf0500000-0xf0500fff has been reserved
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: bridge window [0xe000-0xefff]
pci 0000:00:01.0: bridge window [0xf4000000-0xf70fffff]
pci 0000:00:01.0: bridge window [0xe0000000-0xefffffff]
pci 0000:02:00.0: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:02:00.0: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:02:00.0: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:02:00.1: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:02:00.0: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:02:00.0: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:02:00.1: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:02:00.0: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:02:00.0: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:02:00.1: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:02:00.0: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:02:00.0: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:02:00.0: BAR 7: can't allocate mem resource [0x000000-0x0fffff]
pci 0000:02:00.0: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:02:00.0: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:02:00.0: BAR 10: can't allocate mem resource [0x000000-0x0fffff]
pci 0000:02:00.1: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:02:00.1: reg 184 64bit mmio: [0x000000-0x003fff]
pci 0000:02:00.1: BAR 7: can't allocate mem resource [0x000000-0x0fffff]
pci 0000:02:00.1: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:02:00.1: reg 190 64bit mmio: [0x000000-0x003fff]
pci 0000:02:00.1: BAR 10: can't allocate mem resource [0x000000-0x0fffff]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [0xf7300000-0xf73fffff]
pci 0000:00:1c.0: bridge window [0xf0000000-0xf04fffff]
pci 0000:03:00.0: PCI bridge to [bus 04-04]
pci 0000:03:00.0: PCI bridge, secondary bus 0000:04
pci 0000:03:00.0: bridge window [io disabled]
pci 0000:03:00.0: bridge window [mem disabled]
pci 0000:03:00.0: bridge window [mem pref disabled]
pci 0000:00:1c.5: PCI bridge to [bus 03-04]
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.5: bridge window [io disabled]
pci 0000:00:1c.5: bridge window [mem disabled]
pci 0000:00:1c.5: bridge window [mem pref disabled]
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1c.6: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.6: bridge window [0xd000-0xdfff]
pci 0000:00:1c.6: bridge window [0xf7200000-0xf72fffff]
pci 0000:00:1c.6: bridge window [mem pref disabled]
pci 0000:00:1c.7: PCI bridge to [bus 06-06]
pci 0000:00:1c.7: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.7: bridge window [io disabled]
pci 0000:00:1c.7: bridge window [0xf7100000-0xf71fffff]
pci 0000:00:1c.7: bridge window [mem pref disabled]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:03:00.0: setting latency timer to 64
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
pci_bus 0000:01: resource 1 mem: [0xf4000000-0xf70fffff]
pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
pci_bus 0000:02: resource 1 mem: [0xf7300000-0xf73fffff]
pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf04fffff]
pci_bus 0000:03: resource 3 io: [0x00-0xffff]
pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:04: resource 6 io: [0x00-0xffff]
pci_bus 0000:04: resource 7 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:05: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:05: resource 1 mem: [0xf7200000-0xf72fffff]
pci_bus 0000:06: resource 1 mem: [0xf7100000-0xf71fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15557k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1354882308.728:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key CA2975F3E810BFBE
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:01.0: irq 25 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x1120
intel_idle: does not run on family 6 model 58
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN0] (off)
fan PNP0C0B:01: registered as cooling_device1
ACPI: Fan [FAN1] (off)
fan PNP0C0B:02: registered as cooling_device2
ACPI: Fan [FAN2] (off)
fan PNP0C0B:03: registered as cooling_device3
ACPI: Fan [FAN3] (off)
fan PNP0C0B:04: registered as cooling_device4
ACPI: Fan [FAN4] (off)
ACPI: acpi_idle registered with cpuidle
ACPI: SSDT 00000000de581018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
processor LNXCPU:00: registered as cooling_device5
ACPI: SSDT 00000000de582a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000de583c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
processor LNXCPU:01: registered as cooling_device6
processor LNXCPU:02: registered as cooling_device7
processor LNXCPU:03: registered as cooling_device8
processor LNXCPU:04: registered as cooling_device9
processor LNXCPU:05: registered as cooling_device10
processor LNXCPU:06: registered as cooling_device11
processor LNXCPU:07: registered as cooling_device12
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
ERST: Table is not found!
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 23, io mem 0xf7418000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-220.23.1.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7417000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-220.23.1.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2012-12-07 12:11:49 UTC (1354882309)
Initalizing network drop monitor service
Freeing unused kernel memory: 1244k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1040k freed
Freeing unused kernel memory: 1756k freed
dracut: dracut-004-256.el6_2.1
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7416000 port 0xf7416100 irq 26
ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 26
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
ahci 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ahci 0000:05:00.0: irq 27 for MSI/MSI-X
ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
ahci 0000:05:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m2048@0xf7215000 port 0xf7215100 irq 27
ata8: SATA max UDMA/133 abar m2048@0xf7215000 port 0xf7215180 irq 27
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata7: SATA link down (SStatus 0 SControl 330)
ata8: SATA link down (SStatus 0 SControl 330)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI _SDD failed (AE 0x5)
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ACPI _SDD failed (AE 0x5)
usb 2-1.5: new full speed USB device using ehci_hcd and address 3
Refined TSC clocksource calibration: 3502.640 MHz.
Switching to clocksource tsc
usb 2-1.5: New USB device found, idVendor=056a, idProduct=00ba
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.5: Product: PTK-840
usb 2-1.5: Manufacturer: Tablet
usb 2-1.5: configuration #1 chosen from 1 choice
usb 2-1.6: new low speed USB device using ehci_hcd and address 4
usb 2-1.6: New USB device found, idVendor=045e, idProduct=00b4
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.6: Product: Microsoft® Digital Media Keyboard
usb 2-1.6: Manufacturer: Microsoft
usb 2-1.6: configuration #1 chosen from 1 choice
input: Microsoft Microsoft® Digital Media Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input3
generic-usb 0003:045E:00B4.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Digital Media Keyboard] on usb-0000:00:1d.0-1.6/input0
input: Microsoft Microsoft® Digital Media Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/input/input4
generic-usb 0003:045E:00B4.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Microsoft® Digital Media Keyboard] on usb-0000:00:1d.0-1.6/input1
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI _SDD failed (AE 0x5)
ata1.00: ACPI: failed the second time, disabled
ata1.00: ATA-8: ST2000DM001-9YN164, CC9C, max UDMA/133
ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC9C PQ: 0 ANSI: 5
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ACPI _SDD failed (AE 0x5)
ata2.00: ACPI: failed the second time, disabled
ata2.00: ATA-8: ST2000DM001-9YN164, CC9C, max UDMA/133
ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC9C PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
sdb: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
dracut: Scanning devices sda1 sdb2 for LVM logical volumes vg_embassy420/lv_root vg_embassy420/lv_swap
dracut: inactive '/dev/vg_embassy420/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/vg_embassy420/lv_home' [3.56 TiB] inherit
dracut: inactive '/dev/vg_embassy420/lv_swap' [33.45 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/vg_embassy420-lv_root
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1354882316.535:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
readahead: starting
udev: starting version 147
xhci_hcd 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7400000
xhci_hcd 0000:00:14.0: Failed to enable MSI-X
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:00:14.0: irq 28 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-220.23.1.el6.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
usb usb3: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-220.23.1.el6.x86_64 xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
usb usb4: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
xhci_hcd 0000:06:00.0: setting latency timer to 64
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:06:00.0: irq 19, io mem 0xf7100000
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:06:00.0: irq 29 for MSI/MSI-X
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:06:00.0: irq 30 for MSI/MSI-X
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:06:00.0: irq 31 for MSI/MSI-X
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:06:00.0: irq 32 for MSI/MSI-X
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:06:00.0: irq 33 for MSI/MSI-X
alloc irq_desc for 34 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:06:00.0: irq 34 for MSI/MSI-X
alloc irq_desc for 35 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:06:00.0: irq 35 for MSI/MSI-X
alloc irq_desc for 36 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
xhci_hcd 0000:06:00.0: irq 36 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-220.23.1.el6.x86_64 xhci_hcd
usb usb5: SerialNumber: 0000:06:00.0
usb usb5: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
usb usb6: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-220.23.1.el6.x86_64 xhci_hcd
usb usb6: SerialNumber: 0000:06:00.0
usb usb6: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: WMI: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
usb 5-2: new full speed USB device using xhci_hcd and address 2
xhci_hcd 0000:06:00.0: WARN: Stalled endpoint
xhci_hcd 0000:06:00.0: WARN: Stalled endpoint
xhci_hcd 0000:06:00.0: WARN: Stalled endpoint
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
usb 5-2: New USB device found, idVendor=1532, idProduct=0016
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: Razer DeathAdder
usb 5-2: Manufacturer: Razer
usb 5-2: configuration #1 chosen from 1 choice
input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:1c.7/0000:06:00.0/usb5/5-2/5-2:1.0/input/input5
generic-usb 0003:1532:0016.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:06:00.0-2/input0
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.59 Wed Jun 6 21:19:40 PDT 2012
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
alloc irq_desc for 37 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
HDA Intel 0000:00:1b.0: irq 37 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC892: BIOS auto-probing.
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: I/O resource 0000:00:1f.3 [0xf000-0xf01f] conflicts with ACPI region SMBI [0xf000-0xf00f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
microcode: CPU0 sig=0x306a9, pf=0x2, revision=0xa
platform microcode: firmware: requesting intel-ucode/06-3a-09
microcode: CPU1 sig=0x306a9, pf=0x2, revision=0xa
platform microcode: firmware: requesting intel-ucode/06-3a-09
microcode: CPU2 sig=0x306a9, pf=0x2, revision=0xa
platform microcode: firmware: requesting intel-ucode/06-3a-09
microcode: CPU3 sig=0x306a9, pf=0x2, revision=0xa
platform microcode: firmware: requesting intel-ucode/06-3a-09
microcode: CPU4 sig=0x306a9, pf=0x2, revision=0xa
platform microcode: firmware: requesting intel-ucode/06-3a-09
microcode: CPU5 sig=0x306a9, pf=0x2, revision=0xa
platform microcode: firmware: requesting intel-ucode/06-3a-09
microcode: CPU6 sig=0x306a9, pf=0x2, revision=0xa
platform microcode: firmware: requesting intel-ucode/06-3a-09
microcode: CPU7 sig=0x306a9, pf=0x2, revision=0xa
platform microcode: firmware: requesting intel-ucode/06-3a-09
Microcode Update Driver: v2.00 , Peter Oruba
input: Wacom Intuos4 8x13 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input7
usbcore: registered new interface driver wacom
wacom: v1.52:USB Wacom tablet driver
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
dca service started, version 1.12.1
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.4.8-k
ixgbe: Copyright (c) 1999-2011 Intel Corporation.
ixgbe 0000:02:00.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ixgbe 0000:02:00.0: setting latency timer to 64
alloc irq_desc for 38 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ixgbe 0000:02:00.0: irq 38 for MSI/MSI-X
alloc irq_desc for 39 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ixgbe 0000:02:00.0: irq 39 for MSI/MSI-X
alloc irq_desc for 40 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ixgbe 0000:02:00.0: irq 40 for MSI/MSI-X
alloc irq_desc for 41 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ixgbe 0000:02:00.0: irq 41 for MSI/MSI-X
alloc irq_desc for 42 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ixgbe 0000:02:00.0: irq 42 for MSI/MSI-X
alloc irq_desc for 43 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ixgbe 0000:02:00.0: irq 43 for MSI/MSI-X
alloc irq_desc for 44 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ixgbe 0000:02:00.0: irq 44 for MSI/MSI-X
alloc irq_desc for 45 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ixgbe 0000:02:00.0: irq 45 for MSI/MSI-X
alloc irq_desc for 46 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ixgbe 0000:02:00.0: irq 46 for MSI/MSI-X
ixgbe 0000:02:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8
ixgbe 0000:02:00.0: (PCI Express:5.0GT/s:Width x4) a0:36:9f:0b:fc:e8
ixgbe 0000:02:00.0: MAC: 3, PHY: 3, PBA No: G45270-002
ixgbe 0000:02:00.0: PCI-Express bandwidth available for this card is not sufficient for optimal performance.
ixgbe 0000:02:00.0: For optimal performance a x8 PCI-Express slot is required.
ixgbe 0000:02:00.0: Intel(R) 10 Gigabit Network Connection
ixgbe 0000:02:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ixgbe 0000:02:00.1: setting latency timer to 64
alloc irq_desc for 47 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ixgbe 0000:02:00.1: irq 47 for MSI/MSI-X
alloc irq_desc for 48 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ixgbe 0000:02:00.1: irq 48 for MSI/MSI-X
alloc irq_desc for 49 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ixgbe 0000:02:00.1: irq 49 for MSI/MSI-X
alloc irq_desc for 50 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ixgbe 0000:02:00.1: irq 50 for MSI/MSI-X
alloc irq_desc for 51 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ixgbe 0000:02:00.1: irq 51 for MSI/MSI-X
alloc irq_desc for 52 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ixgbe 0000:02:00.1: irq 52 for MSI/MSI-X
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ixgbe 0000:02:00.1: irq 53 for MSI/MSI-X
alloc irq_desc for 54 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ixgbe 0000:02:00.1: irq 54 for MSI/MSI-X
alloc irq_desc for 55 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ixgbe 0000:02:00.1: irq 55 for MSI/MSI-X
ixgbe 0000:02:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8
ixgbe 0000:02:00.1: (PCI Express:5.0GT/s:Width x4) a0:36:9f:0b:fc:ea
ixgbe 0000:02:00.1: MAC: 3, PHY: 3, PBA No: G45270-002
ixgbe 0000:02:00.1: PCI-Express bandwidth available for this card is not sufficient for optimal performance.
ixgbe 0000:02:00.1: For optimal performance a x8 PCI-Express slot is required.
ixgbe 0000:02:00.1: Intel(R) 10 Gigabit Network Connection
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts:
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
Adding 35078136k swap on /dev/mapper/vg_embassy420-lv_swap. Priority:-1 extents:1 across:35078136k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ADDRCONF(NETDEV_UP): eth0: link is not ready
ixgbe 0000:02:00.0: eth0: NIC Link is Up 1 Gbps, Flow Control: RX/TX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Slow work thread pool: Starting up
Slow work thread pool: Ready
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
eth0: no IPv6 routers present
hda-intel: Invalid position buffer, using LPIB read method instead.
hda-intel: Invalid position buffer, using LPIB read method instead.
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
fuse init (API version 7.13)