dmesg - complex
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-18-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #29-Ubuntu SMP Fri Oct 19 10:26:51 UTC 2012 (Ubuntu 3.5.0-18.29-generic 3.5.7)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000a6f0afff] usable
BIOS-e820: [mem 0x00000000a6f0b000-0x00000000a731afff] reserved
BIOS-e820: [mem 0x00000000a731b000-0x00000000a739afff] ACPI NVS
BIOS-e820: [mem 0x00000000a739b000-0x00000000a73fafff] ACPI data
BIOS-e820: [mem 0x00000000a73fb000-0x00000000a7dfffff] usable
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.00 by Phoenix Technologies Ltd.
efi: ACPI=0xa73fa000 ACPI 2.0=0xa73fa014 SMBIOS=0xa730b000
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x0000000000054000) (0MB)
efi: mem02: type=4, attr=0xf, range=[0x0000000000054000-0x0000000000055000) (0MB)
efi: mem03: type=3, attr=0xf, range=[0x0000000000055000-0x000000000008f000) (0MB)
efi: mem04: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
efi: mem05: type=3, attr=0xf, range=[0x0000000000090000-0x00000000000a0000) (0MB)
efi: mem06: type=2, attr=0xf, range=[0x0000000000100000-0x000000000144f000) (19MB)
efi: mem07: type=7, attr=0xf, range=[0x000000000144f000-0x0000000002000000) (11MB)
efi: mem08: type=2, attr=0xf, range=[0x0000000002000000-0x000000000334f000) (19MB)
efi: mem09: type=7, attr=0xf, range=[0x000000000334f000-0x0000000035340000) (799MB)
efi: mem10: type=2, attr=0xf, range=[0x0000000035340000-0x0000000036998000) (22MB)
efi: mem11: type=7, attr=0xf, range=[0x0000000036998000-0x000000007ac88000) (1090MB)
efi: mem12: type=2, attr=0xf, range=[0x000000007ac88000-0x00000000a3c01000) (655MB)
efi: mem13: type=4, attr=0xf, range=[0x00000000a3c01000-0x00000000a40a2000) (4MB)
efi: mem14: type=7, attr=0xf, range=[0x00000000a40a2000-0x00000000a4184000) (0MB)
efi: mem15: type=4, attr=0xf, range=[0x00000000a4184000-0x00000000a584e000) (22MB)
efi: mem16: type=7, attr=0xf, range=[0x00000000a584e000-0x00000000a5850000) (0MB)
efi: mem17: type=1, attr=0xf, range=[0x00000000a5850000-0x00000000a586e000) (0MB)
efi: mem18: type=7, attr=0xf, range=[0x00000000a586e000-0x00000000a5884000) (0MB)
efi: mem19: type=4, attr=0xf, range=[0x00000000a5884000-0x00000000a66d7000) (14MB)
efi: mem20: type=7, attr=0xf, range=[0x00000000a66d7000-0x00000000a68bc000) (1MB)
efi: mem21: type=2, attr=0xf, range=[0x00000000a68bc000-0x00000000a68c6000) (0MB)
efi: mem22: type=3, attr=0xf, range=[0x00000000a68c6000-0x00000000a6f0b000) (6MB)
efi: mem23: type=5, attr=0x800000000000000f, range=[0x00000000a6f0b000-0x00000000a6f90000) (0MB)
efi: mem24: type=5, attr=0x800000000000000f, range=[0x00000000a6f90000-0x00000000a700b000) (0MB)
efi: mem25: type=6, attr=0x800000000000000f, range=[0x00000000a700b000-0x00000000a704b000) (0MB)
efi: mem26: type=6, attr=0x800000000000000f, range=[0x00000000a704b000-0x00000000a704f000) (0MB)
efi: mem27: type=0, attr=0xf, range=[0x00000000a704f000-0x00000000a70ba000) (0MB)
efi: mem28: type=6, attr=0x800000000000000f, range=[0x00000000a70ba000-0x00000000a71c2000) (1MB)
efi: mem29: type=0, attr=0xf, range=[0x00000000a71c2000-0x00000000a71c6000) (0MB)
efi: mem30: type=6, attr=0x800000000000000f, range=[0x00000000a71c6000-0x00000000a71c8000) (0MB)
efi: mem31: type=0, attr=0xf, range=[0x00000000a71c8000-0x00000000a72c9000) (1MB)
efi: mem32: type=6, attr=0x800000000000000f, range=[0x00000000a72c9000-0x00000000a730b000) (0MB)
efi: mem33: type=0, attr=0xf, range=[0x00000000a730b000-0x00000000a731b000) (0MB)
efi: mem34: type=10, attr=0xf, range=[0x00000000a731b000-0x00000000a7354000) (0MB)
efi: mem35: type=10, attr=0xf, range=[0x00000000a7354000-0x00000000a739b000) (0MB)
efi: mem36: type=9, attr=0xf, range=[0x00000000a739b000-0x00000000a73e1000) (0MB)
efi: mem37: type=9, attr=0xf, range=[0x00000000a73e1000-0x00000000a73fb000) (0MB)
efi: mem38: type=4, attr=0xf, range=[0x00000000a73fb000-0x00000000a7e00000) (10MB)
efi: mem39: type=7, attr=0xf, range=[0x0000000100000000-0x000000013f000000) (1008MB)
efi: mem40: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed81000) (0MB)
DMI 2.6 present.
DMI: FUJITSU LIFEBOOK PH521/FJNBB11, BIOS Version 1.21 09/27/2011
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x13f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FE0000000 write-back
2 base 0A0000000 mask FF8000000 write-back
3 base 0FFE00000 mask FFFE00000 write-protect
4 base 0FFF90000 mask FFFFF8000 uncachable
5 base 0FFF98000 mask FFFFFE000 uncachable
6 base 0FFF9A000 mask FFFFFF000 uncachable
7 base 0FED80000 mask FFFFFF000 uncachable
TOM2: 000000013f000000 aka 5104M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xa7e00 max_arch_pfn = 0x400000000
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xa7dfffff]
[mem 0x00000000-0x7fffffff] page 1G
[mem 0x80000000-0xa7dfffff] page 2M
kernel direct mapping tables up to 0xa7dfffff @ [mem 0x1fffe000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x13effffff]
[mem 0x100000000-0x13effffff] page 2M
kernel direct mapping tables up to 0x13effffff @ [mem 0xa68c4000-0xa68c5fff]
RAMDISK: [mem 0x35340000-0x36997fff]
ACPI: RSDP 00000000a73fa014 00024 (v02 FUJ )
ACPI: XSDT 00000000a73fa120 00084 (v01 FUJ PC 00000001 FUJ 00000001)
ACPI: FACP 00000000a73ed000 000F4 (v04 FUJ PC 00000001 PTL 00000001)
ACPI: DSDT 00000000a73ef000 0A7F1 (v01 FUJ FJNBB11 01150000 FUJ 00000001)
ACPI: FACS 00000000a7388000 00040
ACPI: HPET 00000000a73ec000 00038 (v01 FUJ PC 00000001 PTL 00000001)
ACPI: APIC 00000000a73eb000 0005E (v02 FUJ PC 00000001 PTL 00000001)
ACPI: MCFG 00000000a73ea000 0003C (v01 FUJ PC 00000001 PTL 00000001)
ACPI: SBST 00000000a73e9000 00030 (v01 FUJ PC 00000001 PTL 00000001)
ACPI: SLIC 00000000a73e8000 00176 (v01 FUJ PC 01150000 FUJ 00000001)
ACPI: UEFI 00000000a73e7000 0003E (v01 FUJ PC 00000001 PTL 00000001)
ACPI: UEFI 00000000a73e6000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
ACPI: SSDT 00000000a73e5000 003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: SSDT 00000000a73e3000 0168E (v02 AMD ALIB 00000001 MSFT 04000000)
ACPI: SSDT 00000000a73e2000 00F15 (v01 AMD SB800 00000001 INTL 20061109)
ACPI: UEFI 00000000a73e1000 0012A (v01 FUJ PC 00000001 PTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013effffff]
Initmem setup node 0 [mem 0x00000000-0x13effffff]
NODE_DATA [mem 0x13effc000-0x13effffff]
[ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ac00000-ffff88013e5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x13effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0008efff]
node 0: [mem 0x00090000-0x0009ffff]
node 0: [mem 0x00100000-0xa6f0afff]
node 0: [mem 0xa73fb000-0xa7dfffff]
node 0: [mem 0x100000000-0x13effffff]
On node 0 totalpages: 944287
DMA zone: 64 pages used for memmap
DMA zone: 69 pages reserved
DMA zone: 3850 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 665936 pages, LIFO batch:31
Normal zone: 4032 pages used for memmap
Normal zone: 254016 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000008f000 - 0000000000090000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 00000000a6f0b000 - 00000000a731b000
PM: Registered nosave memory: 00000000a731b000 - 00000000a739b000
PM: Registered nosave memory: 00000000a739b000 - 00000000a73fb000
PM: Registered nosave memory: 00000000a7e00000 - 00000000fed80000
PM: Registered nosave memory: 00000000fed80000 - 00000000fed81000
PM: Registered nosave memory: 00000000fed81000 - 0000000100000000
e820: [mem 0xa7e00000-0xfed7ffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88013ec00000 s83584 r8192 d22912 u1048576
pcpu-alloc: s83584 r8192 d22912 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 923802
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3553080k/5226496k available (6717k kernel code, 1449348k absent, 224068k reserved, 6453k data, 928k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:512 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 15204352 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1646.645 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3293.29 BogoMIPS (lpj=6586580)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 00a7e00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
ACPI: Core revision 20120320
ftrace: allocating 25135 entries in 99 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD E-450 APU with Radeon(tm) HD Graphics stepping 00
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 Ok.
Brought up 2 CPUs
Total of 2 processors activated (6586.58 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xa731b000-0xa739afff] (524288 bytes)
dummy:
RTC time: 11:26:09, date: 11/15/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: Power Resource [P0L0] (off)
ACPI: Power Resource [P0L1] (off)
ACPI: Power Resource [P0L2] (off)
ACPI: Power Resource [P0L3] (off)
ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c1fff]
pci_root PNP0A08:00: host bridge window [mem 0x000c2000-0x000c3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c5fff]
pci_root PNP0A08:00: host bridge window [mem 0x000c6000-0x000c7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000c9fff]
pci_root PNP0A08:00: host bridge window [mem 0x000ca000-0x000cbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cdfff]
pci_root PNP0A08:00: host bridge window [mem 0x000ce000-0x000cffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d1fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d2000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d5fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d6000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000d9fff]
pci_root PNP0A08:00: host bridge window [mem 0x000da000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000ddfff]
pci_root PNP0A08:00: host bridge window [mem 0x000de000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e1fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e2000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e5fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e6000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000e9fff]
pci_root PNP0A08:00: host bridge window [mem 0x000ea000-0x000ebfff]
pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000edfff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xe1000000-0xffffffff]
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: ignoring host bridge window [mem 0x000ce000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c1fff]
pci_bus 0000:00: root bus resource [mem 0x000c2000-0x000c3fff]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c5fff]
pci_bus 0000:00: root bus resource [mem 0x000c6000-0x000c7fff]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000c9fff]
pci_bus 0000:00: root bus resource [mem 0x000ca000-0x000cbfff]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cdfff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d1fff]
pci_bus 0000:00: root bus resource [mem 0x000d2000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d5fff]
pci_bus 0000:00: root bus resource [mem 0x000d6000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000d9fff]
pci_bus 0000:00: root bus resource [mem 0x000da000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000ddfff]
pci_bus 0000:00: root bus resource [mem 0x000de000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e1fff]
pci_bus 0000:00: root bus resource [mem 0x000e2000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e5fff]
pci_bus 0000:00: root bus resource [mem 0x000e6000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000e9fff]
pci_bus 0000:00: root bus resource [mem 0x000ea000-0x000ebfff]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000edfff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xe1000000-0xffffffff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
pci 0000:00:01.0: [1002:9806] type 00 class 0x030000
pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:01.0: reg 14: [io 0x2000-0x20ff]
pci 0000:00:01.0: reg 18: [mem 0xd1100000-0xd113ffff]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
pci 0000:00:01.1: reg 10: [mem 0xd1144000-0xd1147fff]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 10: [io 0x2118-0x211f]
pci 0000:00:11.0: reg 14: [io 0x2124-0x2127]
pci 0000:00:11.0: reg 18: [io 0x2110-0x2117]
pci 0000:00:11.0: reg 1c: [io 0x2120-0x2123]
pci 0000:00:11.0: reg 20: [io 0x2100-0x210f]
pci 0000:00:11.0: reg 24: [mem 0xd114c000-0xd114c3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xd114b000-0xd114bfff]
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xd114c600-0xd114c6ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xd114a000-0xd114afff]
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xd114c500-0xd114c5ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xd1140000-0xd1143fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 10: [mem 0xd1149000-0xd1149fff]
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
pci 0000:00:15.1: supports D1 D2
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 10: [mem 0xd1148000-0xd1148fff]
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 10: [mem 0xd114c400-0xd114c4ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c1fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c2000-0x000c3fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c5fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c6000-0x000c7fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000c9fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000ca000-0x000cbfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000cc000-0x000cdfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d1fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d2000-0x000d3fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d5fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d6000-0x000d7fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000d9fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000da000-0x000dbfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000ddfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000de000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e1fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e2000-0x000e3fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e5fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e6000-0x000e7fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000e9fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000ea000-0x000ebfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000edfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xe1000000-0xffffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [io 0x1000-0x10ff]
pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PCI bridge to [bus 02-03]
pci 0000:00:15.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:15.0: bridge window [mem 0xd0900000-0xd10fffff]
pci 0000:00:15.0: bridge window [mem 0xd0000000-0xd07fffff 64bit pref]
pci 0000:04:00.0: [168c:002b] type 00 class 0x028000
pci 0000:04:00.0: reg 10: [mem 0xd0800000-0xd080ffff 64bit]
pci 0000:04:00.0: supports D1
pci 0000:04:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:15.1: PCI bridge to [bus 04-04]
pci 0000:00:15.1: bridge window [mem 0xd0800000-0xd08fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB1._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
e820: reserve RAM buffer [mem 0xa6f0b000-0xa7ffffff]
e820: reserve RAM buffer [mem 0xa7e00000-0xa7ffffff]
e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c1fff window]
pnp 00:00: [mem 0x000c2000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c5fff window]
pnp 00:00: [mem 0x000c6000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000c9fff window]
pnp 00:00: [mem 0x000ca000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cdfff window]
pnp 00:00: [mem 0x000ce000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d1fff window]
pnp 00:00: [mem 0x000d2000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d5fff window]
pnp 00:00: [mem 0x000d6000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000d9fff window]
pnp 00:00: [mem 0x000da000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000ddfff window]
pnp 00:00: [mem 0x000de000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e1fff window]
pnp 00:00: [mem 0x000e2000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e5fff window]
pnp 00:00: [mem 0x000e6000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000e9fff window]
pnp 00:00: [mem 0x000ea000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000edfff window]
pnp 00:00: [mem 0xc0000000-0xdfffffff window]
pnp 00:00: [mem 0xe1000000-0xffffffff window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0f50-0x0f51]
pnp 00:01: [mem 0xfec00000-0xfec00fff]
pnp 00:01: [mem 0xfee00000-0xfee00fff]
pnp 00:01: [mem 0xe0000000-0xefffffff]
system 00:01: [io 0x0f50-0x0f51] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0000-0x001f]
pnp 00:02: [io 0x0081-0x008f]
pnp 00:02: [io 0x00c0-0x00de]
pnp 00:02: [io 0x040b]
pnp 00:02: [io 0x04d6]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x00f0-0x00fe]
pnp 00:03: [irq 13]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [io 0x0070-0x0071]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x0060]
pnp 00:06: [io 0x0064]
pnp 00:06: [irq 1]
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: [irq 12]
pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:08: [io 0x0022-0x0023]
pnp 00:08: [io 0x002e-0x002f]
pnp 00:08: [io 0x0072-0x0073]
pnp 00:08: [io 0x0080]
pnp 00:08: [io 0x0092]
pnp 00:08: [io 0x00b0-0x00b1]
pnp 00:08: [io 0x00b2]
pnp 00:08: [io 0x00b8]
pnp 00:08: [io 0x00bc]
pnp 00:08: [io 0x00f0]
pnp 00:08: [io 0x04d0-0x04d1]
pnp 00:08: [io 0x0530-0x0537]
pnp 00:08: [io 0x0800-0x0827]
pnp 00:08: [io 0x0830]
pnp 00:08: [io 0x0840-0x0847]
pnp 00:08: [io 0x0b00-0x0b1f]
pnp 00:08: [io 0x0b20-0x0b3f]
pnp 00:08: [io 0x0c00-0x0c01]
pnp 00:08: [io 0x0c14]
pnp 00:08: [io 0x0c50-0x0c52]
pnp 00:08: [io 0x0cd0-0x0cd1]
pnp 00:08: [io 0x0cd2-0x0cd3]
pnp 00:08: [io 0x0cd4-0x0cd5]
pnp 00:08: [io 0x0cd6-0x0cd7]
pnp 00:08: [io 0x0cd8-0x0cdf]
pnp 00:08: [io 0x0cf9]
pnp 00:08: [io 0x8100-0x81ff window]
pnp 00:08: [io 0x8200-0x82ff window]
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x0530-0x0537] has been reserved
system 00:08: [io 0x0800-0x0827] has been reserved
system 00:08: [io 0x0830] has been reserved
system 00:08: [io 0x0840-0x0847] has been reserved
system 00:08: [io 0x0b00-0x0b1f] has been reserved
system 00:08: [io 0x0b20-0x0b3f] has been reserved
system 00:08: [io 0x0c00-0x0c01] has been reserved
system 00:08: [io 0x0c14] has been reserved
system 00:08: [io 0x0c50-0x0c52] has been reserved
system 00:08: [io 0x0cd0-0x0cd1] has been reserved
system 00:08: [io 0x0cd2-0x0cd3] has been reserved
system 00:08: [io 0x0cd4-0x0cd5] has been reserved
system 00:08: [io 0x0cd6-0x0cd7] has been reserved
system 00:08: [io 0x0cd8-0x0cdf] has been reserved
system 00:08: [io 0x0cf9] could not be reserved
system 00:08: [io 0x8100-0x81ff window] has been reserved
system 00:08: [io 0x8200-0x82ff window] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0x000e0000-0x000fffff]
pnp 00:09: [mem 0xffe00000-0xffffffff]
pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:09: [mem 0xfec10000-0xfec1001f]
pnp 00:09: [mem 0xfed00000-0xfed003ff]
pnp 00:09: [mem 0xfed61000-0xfed613ff]
pnp 00:09: [mem 0xfed80000-0xfed80fff]
pnp 00:09: [Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xe0000000-0xefffffff]; adding more reservations
system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:09: [mem 0xffe00000-0xffffffff] has been reserved
system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:09: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:09: [mem 0xfed61000-0xfed613ff] has been reserved
system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:14.4: PCI bridge to [bus 01-01]
pci 0000:00:15.0: PCI bridge to [bus 02-03]
pci 0000:00:15.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:15.0: bridge window [mem 0xd0900000-0xd10fffff]
pci 0000:00:15.0: bridge window [mem 0xd0000000-0xd07fffff 64bit pref]
pci 0000:00:15.1: PCI bridge to [bus 04-04]
pci 0000:00:15.1: bridge window [mem 0xd0800000-0xd08fffff]
pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 5 [mem 0x000c0000-0x000c1fff]
pci_bus 0000:00: resource 6 [mem 0x000c2000-0x000c3fff]
pci_bus 0000:00: resource 7 [mem 0x000c4000-0x000c5fff]
pci_bus 0000:00: resource 8 [mem 0x000c6000-0x000c7fff]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000c9fff]
pci_bus 0000:00: resource 10 [mem 0x000ca000-0x000cbfff]
pci_bus 0000:00: resource 11 [mem 0x000cc000-0x000cdfff]
pci_bus 0000:00: resource 12 [mem 0x000d0000-0x000d1fff]
pci_bus 0000:00: resource 13 [mem 0x000d2000-0x000d3fff]
pci_bus 0000:00: resource 14 [mem 0x000d4000-0x000d5fff]
pci_bus 0000:00: resource 15 [mem 0x000d6000-0x000d7fff]
pci_bus 0000:00: resource 16 [mem 0x000d8000-0x000d9fff]
pci_bus 0000:00: resource 17 [mem 0x000da000-0x000dbfff]
pci_bus 0000:00: resource 18 [mem 0x000dc000-0x000ddfff]
pci_bus 0000:00: resource 19 [mem 0x000de000-0x000dffff]
pci_bus 0000:00: resource 20 [mem 0x000e0000-0x000e1fff]
pci_bus 0000:00: resource 21 [mem 0x000e2000-0x000e3fff]
pci_bus 0000:00: resource 22 [mem 0x000e4000-0x000e5fff]
pci_bus 0000:00: resource 23 [mem 0x000e6000-0x000e7fff]
pci_bus 0000:00: resource 24 [mem 0x000e8000-0x000e9fff]
pci_bus 0000:00: resource 25 [mem 0x000ea000-0x000ebfff]
pci_bus 0000:00: resource 26 [mem 0x000ec000-0x000edfff]
pci_bus 0000:00: resource 27 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 28 [mem 0xe1000000-0xffffffff]
pci_bus 0000:00: resource 29 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 30 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 5 [mem 0x000c0000-0x000c1fff]
pci_bus 0000:01: resource 6 [mem 0x000c2000-0x000c3fff]
pci_bus 0000:01: resource 7 [mem 0x000c4000-0x000c5fff]
pci_bus 0000:01: resource 8 [mem 0x000c6000-0x000c7fff]
pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000c9fff]
pci_bus 0000:01: resource 10 [mem 0x000ca000-0x000cbfff]
pci_bus 0000:01: resource 11 [mem 0x000cc000-0x000cdfff]
pci_bus 0000:01: resource 12 [mem 0x000d0000-0x000d1fff]
pci_bus 0000:01: resource 13 [mem 0x000d2000-0x000d3fff]
pci_bus 0000:01: resource 14 [mem 0x000d4000-0x000d5fff]
pci_bus 0000:01: resource 15 [mem 0x000d6000-0x000d7fff]
pci_bus 0000:01: resource 16 [mem 0x000d8000-0x000d9fff]
pci_bus 0000:01: resource 17 [mem 0x000da000-0x000dbfff]
pci_bus 0000:01: resource 18 [mem 0x000dc000-0x000ddfff]
pci_bus 0000:01: resource 19 [mem 0x000de000-0x000dffff]
pci_bus 0000:01: resource 20 [mem 0x000e0000-0x000e1fff]
pci_bus 0000:01: resource 21 [mem 0x000e2000-0x000e3fff]
pci_bus 0000:01: resource 22 [mem 0x000e4000-0x000e5fff]
pci_bus 0000:01: resource 23 [mem 0x000e6000-0x000e7fff]
pci_bus 0000:01: resource 24 [mem 0x000e8000-0x000e9fff]
pci_bus 0000:01: resource 25 [mem 0x000ea000-0x000ebfff]
pci_bus 0000:01: resource 26 [mem 0x000ec000-0x000edfff]
pci_bus 0000:01: resource 27 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:01: resource 28 [mem 0xe1000000-0xffffffff]
pci_bus 0000:01: resource 29 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 30 [io 0x0d00-0xffff]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xd0900000-0xd10fffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd07fffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xd0800000-0xd08fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Boot video device
PCI: CLS 32 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x9fc01000-0xa3c00fff] (64MB) mapped at [ffff88009fc01000-ffff8800a3c00fff]
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
audit: initializing netlink socket (disabled)
type=2000 audit(1352978769.288:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 7056
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, mapped to 0xffffc90011100000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
ACPI: AC Adapter [ACAD] (off-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Fan [Z0F0] (off)
ACPI: Fan [Z0F1] (off)
ACPI: Fan [Z0F2] (off)
ACPI: Fan [Z0F3] (off)
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (66 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [THZ0] (67 C)
ACPI: Battery Slot [BAT1] (battery present)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
ACPI: Battery Slot [BAT1] (battery present)
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio ccc sxs
scsi0 : ahci
ata1: SATA max UDMA/133 abar m1024@0xd114c000 port 0xd114c100 irq 19
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
QUIRK: Enable AMD PLL fix
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xd114c600
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.5.0-18-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0xd114c500
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.5.0-18-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci_hcd 0000:00:16.2: EHCI Host Controller
ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:16.2: debug port 1
ehci_hcd 0000:00:16.2: irq 17, io mem 0xd114c400
ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.5.0-18-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.0: irq 18, io mem 0xd114b000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.5.0-18-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xd114a000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.5.0-18-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:14.5: irq 18, io mem 0xd1149000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.5.0-18-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:16.0: irq 18, io mem 0xd1148000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 3.5.0-18-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
usb 1-2: new high-speed USB device number 2 using ehci_hcd
Freeing initrd memory: 22880k freed
usb 1-2: New USB device found, idVendor=13fd, idProduct=1640
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: SDRW-08D1S-U
usb 1-2: Manufacturer: Initio
usb 1-2: SerialNumber: 00101016400000005
Initializing USB Mass Storage driver...
scsi1 : usb-storage 1-2:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
Key type trusted registered
Key type encrypted registered
Magic number: 4:697:428
rtc_cmos 00:04: setting system clock to 2012-11-15 11:26:10 UTC (1352978770)
powernow-k8: Found 1 AMD E-450 APU with Radeon(tm) HD Graphics (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (1650 MHz)
powernow-k8: 1 : pstate 1 (1320 MHz)
powernow-k8: 2 : pstate 2 (825 MHz)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: ST9320325AS, 0001SDM1, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST9320325AS 0001 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
usb 1-3: new high-speed USB device number 3 using ehci_hcd
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 928k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1464k freed
Freeing unused kernel memory: 1120k freed
udevd[98]: starting version 175
usb 1-3: New USB device found, idVendor=04f2, idProduct=b213
usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-3: Product: FJ Camera
usb 1-3: Manufacturer: Sonix Technology Co., Ltd.
usb 1-3: SerialNumber: SN0001
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:42: registered as cooling_device6
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4
[drm] Initialized drm 1.1.0 20060810
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: irq 40 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8105e at 0xffffc90011084000, 5c:9a:d8:62:4e:92, XID 00a00000 IRQ 40
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
checking generic (c0000000 300000) vs hw (c0000000 10000000)
fb: conflicting fb hw usage radeondrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (PALM 0x1002:0x9806 0x10CF:0x1731).
[drm] register mmio base: 0xD1100000
[drm] register mmio size: 262144
ATOM BIOS: Fujitsu
radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF
mtrr: no more MTRRs available
[drm] Detected VRAM RAM=384M, BAR=256M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 1819566 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 384M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: irq 41 for MSI/MSI-X
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading PALM Microcode
usb 2-2: new high-speed USB device number 2 using ehci_hcd
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff880134333c00
Refined TSC clocksource calibration: 1646.494 MHz.
Switching to clocksource tsc
[drm] ring test on 0 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] LVDS-1
[drm] HPD1
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD2
[drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] VGA-1
[drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Internal thermal controller without fan control
[drm] radeon: power management initialized
usb 2-2: New USB device found, idVendor=0bda, idProduct=0158
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: USB2.0-CRW
usb 2-2: Manufacturer: Generic
usb 2-2: SerialNumber: 20071114173400000
usbcore: registered new interface driver uas
scsi2 : usb-storage 2-2:1.0
usbcore: registered new interface driver ums-realtek
usb 5-3: new full-speed USB device number 2 using ohci_hcd
[drm] fb mappable at 0xC0142000
[drm] vram apper at 0xC0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.18.0 20080528 for 0000:00:01.0 on minor 0
scsi 1:0:0:0: CD-ROM ASUS SDRW-08D1S-U A202 PQ: 0 ANSI: 0
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
usb 5-3: New USB device found, idVendor=0cf3, idProduct=3000
usb 5-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-2: USB disconnect, device number 2
EXT4-fs (sda6): INFO: recovery required on readonly filesystem
EXT4-fs (sda6): write access will be enabled during recovery
EXT4-fs (sda6): orphan cleanup on readonly fs
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 915794
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 116
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 915779
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 915789
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 915791
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 915733
EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 133546
EXT4-fs (sda6): 7 orphan inodes deleted
EXT4-fs (sda6): recovery complete
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
Adding 2791420k swap on /dev/sda5. Priority:-1 extents:1 across:2791420k
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[504]: starting version 175
lp: driver loaded but no devices found
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
ppdev: user-space parallel port driver
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
input: Fujitsu FUJ02B1 as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:38/FUJ02B1:00/input/input5
fujitsu_laptop: ACPI: Fujitsu FUJ02B1 [FJEX] (on)
input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/device:00/FUJ02E3:00/input/input6
fujitsu_laptop: ACPI: Fujitsu FUJ02E3 [FEXT] (on)
fujitsu_laptop: BTNI: [0x80001]
fujitsu_laptop: driver 0.6.0 successfully loaded
type=1400 audit(1352978791.801:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=599 comm="apparmor_parser"
type=1400 audit(1352978791.805:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=599 comm="apparmor_parser"
Linux video capture interface: v2.00
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMB_.SMB0 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
sp5100_tco: mmio address 0xb80830 already in use
uvcvideo: Found UVC 1.00 device FJ Camera (04f2:b213)
input: FJ Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
cfg80211: Calling CRDA to update world regulatory domain
type=1400 audit(1352978792.097:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=689 comm="apparmor_parser"
type=1400 audit(1352978792.101:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=689 comm="apparmor_parser"
type=1400 audit(1352978792.101:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=689 comm="apparmor_parser"
type=1400 audit(1352978792.113:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=694 comm="apparmor_parser"
ath: EEPROM regdomain: 0x6a
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6a
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
snd_hda_intel 0000:00:01.1: irq 42 for MSI/MSI-X
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
microcode: CPU0: patch_level=0x05000101
ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0
ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90011420000, irq=17
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
hda_codec: ALC269VB: SKU not ready 0x90970130
input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
init: failsafe main process (791) killed by TERM signal
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
microcode: failed to load file amd-ucode/microcode_amd.bin
microcode: CPU1: patch_level=0x05000101
type=1400 audit(1352978792.801:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=928 comm="apparmor_parser"
type=1400 audit(1352978792.805:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=928 comm="apparmor_parser"
type=1400 audit(1352978792.805:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=928 comm="apparmor_parser"
type=1400 audit(1352978792.809:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=927 comm="apparmor_parser"
microcode: failed to load file amd-ucode/microcode_amd.bin
microcode: Microcode Update Driver: v2.00 , Peter Oruba
psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input11
r8169 0000:02:00.0: eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
usb 5-3: USB disconnect, device number 2
usbcore: registered new interface driver ath3k
usb 5-3: new full-speed USB device number 3 using ohci_hcd
usb 5-3: New USB device found, idVendor=1690, idProduct=0754
usb 5-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usbcore: registered new interface driver btusb
Netfilter messages via NETLINK v0.30.
device eth0 entered promiscuous mode
init: plymouth-stop pre-start process (1862) terminated with status 1
UDF-fs: Partition marked readonly; forcing readonly mount
UDF-fs: INFO Mounting volume 'THE_ASSASSINS', timestamp 2012/11/02 22:11 (11a4)
VFS: busy inodes on changed media or resized disk sr0
usb 1-1: new high-speed USB device number 4 using ehci_hcd
usb 1-1: New USB device found, idVendor=0421, idProduct=0078
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: N78
usb 1-1: Manufacturer: Nokia
usb 1-1: SerialNumber: 352057027391923
scsi3 : usb-storage 1-1:1.0
usb 1-1: USB disconnect, device number 4
usb 1-1: new high-speed USB device number 5 using ehci_hcd
usb 1-1: New USB device found, idVendor=0421, idProduct=0078
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: N78
usb 1-1: Manufacturer: Nokia
usb 1-1: SerialNumber: 352057027391923
scsi4 : usb-storage 1-1:1.0
usb 1-1: USB disconnect, device number 5
usb 1-1: new high-speed USB device number 6 using ehci_hcd
usb 1-1: device not accepting address 6, error -71
hub 1-0:1.0: unable to enumerate USB device on port 1
hub 4-0:1.0: unable to enumerate USB device on port 1
usb 1-1: new high-speed USB device number 8 using ehci_hcd
usb 1-1: New USB device found, idVendor=0421, idProduct=0078
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: N78
usb 1-1: Manufacturer: Nokia
usb 1-1: SerialNumber: 352057027391923
scsi5 : usb-storage 1-1:1.0
usb 1-1: USB disconnect, device number 8
usb 1-1: new high-speed USB device number 9 using ehci_hcd
hub 1-0:1.0: unable to enumerate USB device on port 1
usb 4-1: new full-speed USB device number 3 using ohci_hcd
usb 4-1: not running at top speed; connect to a high speed hub
usb 4-1: New USB device found, idVendor=0421, idProduct=0078
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1: Product: N78
usb 4-1: Manufacturer: Nokia
usb 4-1: SerialNumber: 352057027391923
scsi6 : usb-storage 4-1:1.0
scsi 6:0:0:0: Direct-Access Nokia S60 1.0 PQ: 0 ANSI: 0
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] 3907584 512-byte logical blocks: (2.00 GB/1.86 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 6:0:0:0: [sdb] No Caching mode page present
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] No Caching mode page present
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 6:0:0:0: [sdb] No Caching mode page present
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Attached SCSI removable disk
usb 4-1: USB disconnect, device number 3
usb 1-1: new high-speed USB device number 10 using ehci_hcd
usb 1-1: New USB device found, idVendor=0421, idProduct=0078
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: N78
usb 1-1: Manufacturer: Nokia
usb 1-1: SerialNumber: 352057027391923
scsi7 : usb-storage 1-1:1.0
usb 1-1: USB disconnect, device number 10
usb 1-1: new high-speed USB device number 11 using ehci_hcd
hub 1-0:1.0: unable to enumerate USB device on port 1
usb 4-1: new full-speed USB device number 4 using ohci_hcd
usb 4-1: not running at top speed; connect to a high speed hub
usb 4-1: New USB device found, idVendor=0421, idProduct=0078
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1: Product: N78
usb 4-1: Manufacturer: Nokia
usb 4-1: SerialNumber: 352057027391923
scsi8 : usb-storage 4-1:1.0
scsi 8:0:0:0: Direct-Access Nokia S60 1.0 PQ: 0 ANSI: 0
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:0: [sdb] 3907584 512-byte logical blocks: (2.00 GB/1.86 GiB)
sd 8:0:0:0: [sdb] Write Protect is off
sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 8:0:0:0: [sdb] No Caching mode page present
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] No Caching mode page present
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 8:0:0:0: [sdb] No Caching mode page present
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Attached SCSI removable disk
usb 4-1: USB disconnect, device number 4
usb 1-1: new high-speed USB device number 12 using ehci_hcd
usb 1-1: New USB device found, idVendor=0421, idProduct=0078
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: N78
usb 1-1: Manufacturer: Nokia
usb 1-1: SerialNumber: 352057027391923
scsi9 : usb-storage 1-1:1.0
scsi 9:0:0:0: Direct-Access Nokia S60 1.0 PQ: 0 ANSI: 0
sd 9:0:0:0: Attached scsi generic sg2 type 0
sd 9:0:0:0: [sdb] 3907584 512-byte logical blocks: (2.00 GB/1.86 GiB)
sd 9:0:0:0: [sdb] Write Protect is off
sd 9:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 9:0:0:0: [sdb] No Caching mode page present
sd 9:0:0:0: [sdb] Assuming drive cache: write through
sd 9:0:0:0: [sdb] No Caching mode page present
sd 9:0:0:0: [sdb] Assuming drive cache: write through
usb 1-1: USB disconnect, device number 12
sd 9:0:0:0: [sdb] Unhandled error code
sd 9:0:0:0: [sdb]
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 9:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 00 00 00 00 08 00
end_request: I/O error, dev sdb, sector 0
quiet_error: 39 callbacks suppressed
Buffer I/O error on device sdb, logical block 0
ldm_validate_partition_table(): Disk read failed.
Dev sdb: unable to read RDB block 0
sdb: unable to read partition table
sd 9:0:0:0: [sdb] Attached SCSI removable disk
usb 1-1: new high-speed USB device number 13 using ehci_hcd
usb 1-1: New USB device found, idVendor=0421, idProduct=0078
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: N78
usb 1-1: Manufacturer: Nokia
usb 1-1: SerialNumber: 352057027391923
scsi10 : usb-storage 1-1:1.0
scsi 10:0:0:0: Direct-Access Nokia S60 1.0 PQ: 0 ANSI: 0
sd 10:0:0:0: Attached scsi generic sg2 type 0
sd 10:0:0:0: [sdb] 3907584 512-byte logical blocks: (2.00 GB/1.86 GiB)
sd 10:0:0:0: [sdb] Write Protect is off
sd 10:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 10:0:0:0: [sdb] No Caching mode page present
sd 10:0:0:0: [sdb] Assuming drive cache: write through
sd 10:0:0:0: [sdb] No Caching mode page present
sd 10:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 10:0:0:0: [sdb] No Caching mode page present
sd 10:0:0:0: [sdb] Assuming drive cache: write through
sd 10:0:0:0: [sdb] Attached SCSI removable disk
usb 1-1: USB disconnect, device number 13
scsi 10:0:0:0: [sdb] Unhandled error code
scsi 10:0:0:0: [sdb]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
scsi 10:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 01 e1 00 00 08 00
end_request: I/O error, dev sdb, sector 481
Buffer I/O error on device sdb1, logical block 352
Buffer I/O error on device sdb1, logical block 353
Buffer I/O error on device sdb1, logical block 354
Buffer I/O error on device sdb1, logical block 355
Buffer I/O error on device sdb1, logical block 356
Buffer I/O error on device sdb1, logical block 357
Buffer I/O error on device sdb1, logical block 358
Buffer I/O error on device sdb1, logical block 359
Buffer I/O error on device sdb1, logical block 352
usb 1-1: new high-speed USB device number 14 using ehci_hcd
usb 1-1: New USB device found, idVendor=0421, idProduct=0078
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: N78
usb 1-1: Manufacturer: Nokia
usb 1-1: SerialNumber: 352057027391923
scsi11 : usb-storage 1-1:1.0
usb 1-1: USB disconnect, device number 14
usb 1-1: new high-speed USB device number 15 using ehci_hcd
usb 1-1: New USB device found, idVendor=0421, idProduct=007b
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: N78
usb 1-1: Manufacturer: Nokia
usb 1-1: SerialNumber: 352057027391923
NET: Registered protocol family 35
usbcore: registered new interface driver cdc_phonet
usbcore: registered new interface driver cdc_ether
usb 1-1: bad CDC descriptors
usbcore: registered new interface driver rndis_host
usb 1-1: bad CDC descriptors
usbcore: registered new interface driver rndis_wlan
cdc_acm 1-1:1.0: ttyACM0: USB ACM device
cdc_acm 1-1:1.2: ttyACM1: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usb 1-1: USB disconnect, device number 15
cdc_acm 1-1:1.3: acm_start_wb - usb_submit_urb(write bulk) failed: -19
cdc_acm 1-1:1.3: acm_start_wb - usb_submit_urb(write bulk) failed: -19
cdc_acm 1-1:1.3: acm_start_wb - usb_submit_urb(write bulk) failed: -19
cdc_acm 1-1:1.3: acm_start_wb - usb_submit_urb(write bulk) failed: -19
cdc_acm 1-1:1.3: acm_start_wb - usb_submit_urb(write bulk) failed: -19
cdc_acm 1-1:1.3: acm_start_wb - usb_submit_urb(write bulk) failed: -19
cdc_acm 1-1:1.3: acm_start_wb - usb_submit_urb(write bulk) failed: -19
cdc_acm 1-1:1.3: acm_start_wb - usb_submit_urb(write bulk) failed: -19
cdc_acm 1-1:1.3: acm_start_wb - usb_submit_urb(write bulk) failed: -19
cdc_acm 1-1:1.3: acm_start_wb - usb_submit_urb(write bulk) failed: -19
cdc_acm 1-1:1.3: acm_start_wb - usb_submit_urb(write bulk) failed: -19
usb 1-1: new high-speed USB device number 16 using ehci_hcd
usb 1-1: New USB device found, idVendor=0421, idProduct=007b
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: N78
usb 1-1: Manufacturer: Nokia
usb 1-1: SerialNumber: 352057027391923
cdc_acm 1-1:1.0: ttyACM0: USB ACM device
usb 1-1: bad CDC descriptors
usb 1-1: bad CDC descriptors
cdc_acm 1-1:1.2: ttyACM1: USB ACM device
usb 1-1: USB disconnect, device number 16
usb 1-1: new high-speed USB device number 17 using ehci_hcd
usb 1-1: New USB device found, idVendor=0421, idProduct=007b
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: N78
usb 1-1: Manufacturer: Nokia
usb 1-1: SerialNumber: 352057027391923
cdc_acm 1-1:1.0: ttyACM0: USB ACM device
usb 1-1: bad CDC descriptors
usb 1-1: bad CDC descriptors
cdc_acm 1-1:1.2: ttyACM1: USB ACM device
usb 1-1: USB disconnect, device number 17
usb 1-1: new high-speed USB device number 18 using ehci_hcd
hub 1-0:1.0: unable to enumerate USB device on port 1
usb 4-1: new full-speed USB device number 5 using ohci_hcd
usb 4-1: not running at top speed; connect to a high speed hub
usb 4-1: New USB device found, idVendor=0421, idProduct=007b
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1: Product: N78
usb 4-1: Manufacturer: Nokia
usb 4-1: SerialNumber: 352057027391923
cdc_acm 4-1:1.0: ttyACM0: USB ACM device
usb 4-1: bad CDC descriptors
usb 4-1: bad CDC descriptors
cdc_acm 4-1:1.2: ttyACM1: USB ACM device
UDF-fs: Partition marked readonly; forcing readonly mount
UDF-fs: INFO Mounting volume 'Skyfall 2012', timestamp 2012/11/13 05:13 (11a4)
PPP BSD Compression module registered
PPP Deflate Compression module registered
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=0 offMin=0x34e offMax=0xcc3
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.1.18_Ubuntu (interface 0x00190000).
vboxpci: IOMMU not found (not registered)
usb 5-1: new low-speed USB device number 4 using ohci_hcd
usb 5-1: New USB device found, idVendor=1d57, idProduct=32da
usb 5-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 5-1: Product: 2.4G Receiver
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: 2.4G Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input12
hid-generic 0003:1D57:32DA.0001: input,hidraw0: USB HID v1.10 Keyboard [2.4G Receiver] on usb-0000:00:13.0-1/input0
input: 2.4G Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.1/input/input13
hid-generic 0003:1D57:32DA.0002: input,hidraw1: USB HID v1.10 Mouse [2.4G Receiver] on usb-0000:00:13.0-1/input1
input: 2.4G Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.2/input/input14
hid-generic 0003:1D57:32DA.0003: input,hidraw2: USB HID v1.10 Device [2.4G Receiver] on usb-0000:00:13.0-1/input2