dmesg - first-run-server-host3
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.35-22-server (buildd@allspice) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu4) ) #33-Ubuntu SMP Sun Sep 19 20:48:58 UTC 2010 (Ubuntu 2.6.35-22.33-server 2.6.35.4)
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fe00000 (usable)
BIOS-e820: 00000000fc000000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.4 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x7fe00 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-combining
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 00F0000000 mask FFF8000000 uncachable
1 base 00F8000000 mask FFFC000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000007fe00000 (usable)
modified: 00000000fc000000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fbc80] fbc80
init_memory_mapping: 0000000000000000-000000007fe00000
0000000000 - 007fe00000 page 2M
kernel direct mapping tables up to 7fe00000 @ 16000-19000
RAMDISK: 37599000 - 37ff0000
ACPI: RSDP 00000000000ea020 00024 (v02 Xen)
ACPI: XSDT 00000000fc012ca0 00034 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: FACP 00000000fc012ac0 000F4 (v04 Xen HVM 00000000 HVML 00000000)
ACPI: DSDT 00000000fc002c40 0FDFD (v02 Xen HVM 00000000 INTL 20081031)
ACPI: FACS 00000000fc002c00 00040
ACPI: APIC 00000000fc012bc0 000D8 (v02 Xen HVM 00000000 HVML 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000007fe00000
Initmem setup node 0 0000000000000000-000000007fe00000
NODE_DATA [0000000001d1b0c0 - 0000000001d200bf]
[ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002600000-ffff8800041fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007fe00
On node 0 totalpages: 523663
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3927 pages, LIFO batch:0
DMA32 zone: 7105 pages used for memmap
DMA32 zone: 512575 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1f48
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 15 CPUs, 13 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 7fe00000 (gap: 7fe00000:7c200000)
Booting paravirtualized kernel on bare hardware
early_res array is doubled to 64 at [17180 - 1797f]
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:15 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s91520 r8192 d23168 u131072
pcpu-alloc: s91520 r8192 d23168 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 --
Built 1 zonelists in Node order, mobility grouping on. Total pages: 516502
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Subtract (54 early reservations)
#1 [0001000000 - 0001d1a954] TEXT DATA BSS
#2 [0037599000 - 0037ff0000] RAMDISK
#3 [0001d1b000 - 0001d1b091] BRK
#4 [00000fbc90 - 0000100000] BIOS reserved
#5 [00000fbc80 - 00000fbc90] MP-table mpf
#6 [000009fc00 - 00000fbb90] BIOS reserved
#7 [00000fbc74 - 00000fbc80] BIOS reserved
#8 [00000fbb90 - 00000fbc74] MP-table mpc
#9 [0000010000 - 0000012000] TRAMPOLINE
#10 [0000012000 - 0000016000] ACPI WAKEUP
#11 [0000016000 - 0000017000] PGTABLE
#12 [0001d1b0c0 - 0001d200c0] NODE_DATA
#13 [0001d200c0 - 0001d210c0] BOOTMEM
#14 [0000017000 - 0000017180] BOOTMEM
#15 [0002522000 - 0002523000] BOOTMEM
#16 [0002523000 - 0002524000] BOOTMEM
#17 [0002600000 - 0004200000] MEMMAP 0
#18 [0001d210c0 - 0001d390c0] BOOTMEM
#19 [0001d390c0 - 0001d510c0] BOOTMEM
#20 [0001d52000 - 0001d53000] BOOTMEM
#21 [0001d1a980 - 0001d1a9c3] BOOTMEM
#22 [0001d1aa00 - 0001d1ab50] BOOTMEM
#23 [0001d1ab80 - 0001d1abe8] BOOTMEM
#24 [0001d1ac00 - 0001d1ac68] BOOTMEM
#25 [0001d1ac80 - 0001d1ace8] BOOTMEM
#26 [0001d1ad00 - 0001d1ad68] BOOTMEM
#27 [0001d1ad80 - 0001d1ade8] BOOTMEM
#28 [0001d1ae00 - 0001d1ae20] BOOTMEM
#29 [0001d1ae40 - 0001d1aeb5] BOOTMEM
#30 [0001d1aec0 - 0001d1af35] BOOTMEM
#31 [0001e00000 - 0001e1e000] BOOTMEM
#32 [0001e20000 - 0001e3e000] BOOTMEM
#33 [0001e40000 - 0001e5e000] BOOTMEM
#34 [0001e60000 - 0001e7e000] BOOTMEM
#35 [0001e80000 - 0001e9e000] BOOTMEM
#36 [0001ea0000 - 0001ebe000] BOOTMEM
#37 [0001ec0000 - 0001ede000] BOOTMEM
#38 [0001ee0000 - 0001efe000] BOOTMEM
#39 [0001f00000 - 0001f1e000] BOOTMEM
#40 [0001f20000 - 0001f3e000] BOOTMEM
#41 [0001f40000 - 0001f5e000] BOOTMEM
#42 [0001f60000 - 0001f7e000] BOOTMEM
#43 [0001f80000 - 0001f9e000] BOOTMEM
#44 [0001fa0000 - 0001fbe000] BOOTMEM
#45 [0001fc0000 - 0001fde000] BOOTMEM
#46 [0001d1af40 - 0001d1af48] BOOTMEM
#47 [0001d1af80 - 0001d1af88] BOOTMEM
#48 [0001d1afc0 - 0001d1affc] BOOTMEM
#49 [0001d510c0 - 0001d51138] BOOTMEM
#50 [0001d51140 - 0001d51250] BOOTMEM
#51 [0001d51280 - 0001d512c8] BOOTMEM
#52 [0001d51300 - 0001d51348] BOOTMEM
#53 [0001d53000 - 0001d5b000] BOOTMEM
Memory: 2039876k/2095104k available (5793k kernel code, 452k absent, 54776k reserved, 5388k data, 828k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=15, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:4352 nr_irqs:1208
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 20971520 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Fast TSC calibration using PIT
Detected 2400.141 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.28 BogoMIPS (lpj=24001410)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Unsupported number of siblings 64
mce: CPU supports 0 MCE banks
Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only.
ACPI: Core revision 20100428
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 22982 entries in 91 pages
Setting APIC routing to physical flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
Booting Node 0, Processors #1
CPU: Unsupported number of siblings 64
mce: CPU supports 0 MCE banks
Brought up 2 CPUs
Total of 2 processors activated (9601.13 BogoMIPS).
devtmpfs: initialized
regulator: core version 0.5
Time: 7:01:38 Date: 11/09/12
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
Trying to unpack rootfs image as initramfs...
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbffffff]
pci 0000:00:01.1: reg 20: [io 0xc220-0xc22f]
pci 0000:00:01.2: reg 20: [io 0xc200-0xc21f]
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
pci 0000:00:01.3: quirk: [io 0x1f40-0x1f7f] claimed by PIIX4 ACPI
pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf1ffffff pref]
pci 0000:00:02.0: reg 14: [mem 0xf3000000-0xf3000fff]
pci 0000:00:03.0: reg 10: [io 0xc000-0xc0ff]
pci 0000:00:03.0: reg 14: [mem 0xf2000000-0xf2ffffff pref]
pci 0000:00:04.0: reg 10: [io 0xc100-0xc1ff]
pci 0000:00:04.0: reg 14: [mem 0xf3001000-0xf30010ff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Freeing initrd memory: 10588k freed
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
HEST: Table is not found!
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: WMI: Mapper loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 000000007fe00000 - 000000007fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource tsc
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:02: [io 0x10c0-0x1141] has been reserved
system 00:02: [io 0xb044-0xb047] has been reserved
system 00:03: [io 0x08a0-0x08a3] has been reserved
system 00:03: [io 0x0cc0-0x0ccf] has been reserved
system 00:03: [io 0x04d0-0x04d1] has been reserved
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfbffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1352444498.920:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.14)
msgmni has been set to 4004
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
ACPI: acpi_idle registered with cpuidle
ERST: Table is not found!
Linux agpgart interface v0.103
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
ata_piix 0000:00:01.1: version 2.13
ata_piix 0000:00:01.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc220 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc228 irq 15
Fixed MDIO Bus: probed
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
uhci_hcd 0000:00:01.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:01.2: setting latency timer to 64
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c200
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.1.1 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
lo: Disabled Privacy Extensions
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
Magic number: 4:408:15
rtc_cmos 00:05: setting system clock to 2012-11-09 07:01:39 UTC (1352444499)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata1.01: NODEV after polling detection
ata1.00: ATA-7: QEMU HARDDISK, 0.10.2, max UDMA/100
ata1.00: 41943040 sectors, multi 16: LBA48
ata1.00: configured for MWDMA2
ata2.01: ATAPI: QEMU DVD-ROM, 0.10.2, max UDMA/100
ata2.01: configured for MWDMA2
usb 1-2: new full speed USB device using uhci_hcd and address 2
ata1: WARNING: synchronous SCSI scan failed without making any progress,
switching to async
ata2: WARNING: synchronous SCSI scan failed without making any progress,
switching to async
Freeing unused kernel memory: 828k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 332k freed
Freeing unused kernel memory: 1624k freed
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
xen-platform-pci 0000:00:03.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
Xen version 4.0.
Hypercall area is 1 pages.
suspend: event channel 5
xen-vbd: registered block device major 202
blkfront: xvda: barriers enabled
xvda: xvda1 xvda2
blkfront: xvdd: barriers enabled
xen_mem: [uvp] Initialising new balloon driver.
netfront: Initialising virtual ethernet driver.
udev[85]: starting version 163
FDC 0 is a S82078B
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (xvda2): mounted filesystem with ordered data mode
udev[324]: starting version 163
Adding 3905532k swap on /dev/xvda1. Priority:-1 extents:1 across:3905532k SS
piix4_smbus 0000:00:01.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
type=1400 audit(1352444502.574:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=535 comm="apparmor_parser"
type=1400 audit(1352444502.574:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=535 comm="apparmor_parser"
type=1400 audit(1352444502.574:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=535 comm="apparmor_parser"
usbcore: registered new interface driver hiddev
EXT3-fs (xvda2): using internal journal
lp: driver loaded but no devices found
input: QEMU 0.10.2 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/input/input3
generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.10.2 QEMU USB Tablet] on usb-0000:00:01.2-2/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
type=1400 audit(1352444502.864:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=658 comm="apparmor_parser"
type=1400 audit(1352444502.864:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=658 comm="apparmor_parser"
type=1400 audit(1352444502.864:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=658 comm="apparmor_parser"
type=1400 audit(1352444502.864:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=659 comm="apparmor_parser"
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
eth0: no IPv6 routers present
blkfront: xvde: barriers enabled
xvde: unknown partition table
xvde: xvde1
EXT4-fs (xvde1): mounted filesystem with ordered data mode. Opts: (null)