dmesg - test-1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-18-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #29-Ubuntu SMP Fri Oct 19 10:26:51 UTC 2012 (Ubuntu 3.5.0-18.29-generic 3.5.7)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009b7ff] usable
BIOS-e820: [mem 0x000000000009b800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007feeffff] usable
BIOS-e820: [mem 0x000000007fef0000-0x000000007fef2fff] ACPI NVS
BIOS-e820: [mem 0x000000007fef3000-0x000000007fefffff] ACPI data
BIOS-e820: [mem 0x00000000d0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: EVGA 132-CK-NF78/132-CK-NF78, BIOS P10 12/30/2009
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x7fef0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CBFFF write-protect
CC000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07FF00000 mask FFFF00000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2047MB, range: 1MB, type UC
total RAM covered: 2047M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2047MB, range: 1MB, type UC
found SMP MP-table at [mem 0x000f41d0-0x000f41df] mapped at [ffff8800000f41d0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000095000] 95000 size 24576
init_memory_mapping: [mem 0x00000000-0x7feeffff]
[mem 0x00000000-0x7fdfffff] page 2M
[mem 0x7fe00000-0x7feeffff] page 4k
kernel direct mapping tables up to 0x7feeffff @ [mem 0x1fffc000-0x1fffffff]
RAMDISK: [mem 0x362e6000-0x3716afff]
ACPI: RSDP 00000000000f8190 00014 (v00 Nvidia)
ACPI: RSDT 000000007fef3040 0003C (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
ACPI: FACP 000000007fef30c0 00074 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
ACPI: DSDT 000000007fef3180 05453 (v01 NVIDIA NVDAACPI 00001000 MSFT 03000000)
ACPI: FACS 000000007fef0000 00040
ACPI: HPET 000000007fef8740 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000098)
ACPI: WDRT 000000007fef87c0 00047 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
ACPI: MCFG 000000007fef8880 0003C (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
ACPI: APIC 000000007fef8640 00098 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
ACPI: OEMN 000000007fef8900 03F98 (v01 NVIDIA NTUNEOEM 20302E31 NVDA 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007feeffff]
Initmem setup node 0 [mem 0x00000000-0x7feeffff]
NODE_DATA [mem 0x7feec000-0x7feeffff]
[ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009afff]
node 0: [mem 0x00100000-0x7feeffff]
On node 0 totalpages: 523899
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3909 pages, LIFO batch:0
DMA32 zone: 8124 pages used for memmap
DMA32 zone: 511796 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009b000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
e820: [mem 0x7ff00000-0xcfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s83584 r8192 d22912 u524288
pcpu-alloc: s83584 r8192 d22912 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 515705
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2031664k/2096064k available (6717k kernel code, 468k absent, 63932k reserved, 6453k data, 928k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:712 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 8388608 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2400.171 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.34 BogoMIPS (lpj=9600684)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 25135 entries in 99 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07
Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 #2 #3 Ok.
Brought up 4 CPUs
Total of 4 processors activated (19201.36 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x7fef0000-0x7fef2fff] (12288 bytes)
dummy:
RTC time: 1:35:12, date: 11/11/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x7ff00000-0xcfffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x7ff00000-0xcfffffff]
pci 0000:00:00.0: [10de:03a1] type 00 class 0x060000
pci 0000:00:00.1: [10de:03ac] type 00 class 0x050000
pci 0000:00:00.2: [10de:03aa] type 00 class 0x050000
pci 0000:00:00.3: [10de:03a9] type 00 class 0x050000
pci 0000:00:00.4: [10de:03ab] type 00 class 0x050000
pci 0000:00:00.5: [10de:03a8] type 00 class 0x050000
pci 0000:00:00.6: [10de:03b5] type 00 class 0x050000
pci 0000:00:00.7: [10de:03b4] type 00 class 0x050000
pci 0000:00:01.0: [10de:03ad] type 00 class 0x050000
pci 0000:00:01.1: [10de:03ae] type 00 class 0x050000
pci 0000:00:01.2: [10de:03af] type 00 class 0x050000
pci 0000:00:01.3: [10de:03b0] type 00 class 0x050000
pci 0000:00:01.4: [10de:03b1] type 00 class 0x050000
pci 0000:00:01.5: [10de:03b2] type 00 class 0x050000
pci 0000:00:01.6: [10de:03b3] type 00 class 0x050000
pci 0000:00:02.0: [10de:03b6] type 00 class 0x050000
pci 0000:00:02.1: [10de:03bc] type 00 class 0x050000
pci 0000:00:02.2: [10de:03ba] type 00 class 0x050000
pci 0000:00:03.0: [10de:03b7] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: [10de:0369] type 00 class 0x050000
pci 0000:00:0a.0: [10de:0360] type 00 class 0x060100
pci 0000:00:0a.0: reg 10: [io 0xfc00-0xfc7f]
pci 0000:00:0a.1: [10de:0368] type 00 class 0x0c0500
pci 0000:00:0a.1: reg 10: [io 0xf800-0xf83f]
pci 0000:00:0a.1: reg 20: [io 0xf400-0xf43f]
pci 0000:00:0a.1: reg 24: [io 0xf000-0xf03f]
pci 0000:00:0a.1: PME# supported from D3hot D3cold
pci 0000:00:0b.0: [10de:036c] type 00 class 0x0c0310
pci 0000:00:0b.0: reg 10: [mem 0xcffff000-0xcfffffff]
pci 0000:00:0b.0: supports D1 D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.1: [10de:036d] type 00 class 0x0c0320
pci 0000:00:0b.1: reg 10: [mem 0xcfffe000-0xcfffe0ff]
pci 0000:00:0b.1: supports D1 D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: [10de:036e] type 00 class 0x01018a
pci 0000:00:0d.0: reg 20: [io 0xec00-0xec0f]
pci 0000:00:0e.0: [10de:037f] type 00 class 0x010185
pci 0000:00:0e.0: reg 10: [io 0x09f0-0x09f7]
pci 0000:00:0e.0: reg 14: [io 0x0bf0-0x0bf3]
pci 0000:00:0e.0: reg 18: [io 0x0970-0x0977]
pci 0000:00:0e.0: reg 1c: [io 0x0b70-0x0b73]
pci 0000:00:0e.0: reg 20: [io 0xd800-0xd80f]
pci 0000:00:0e.0: reg 24: [mem 0xcfffd000-0xcfffdfff]
pci 0000:00:0e.1: [10de:037f] type 00 class 0x010185
pci 0000:00:0e.1: reg 10: [io 0x09e0-0x09e7]
pci 0000:00:0e.1: reg 14: [io 0x0be0-0x0be3]
pci 0000:00:0e.1: reg 18: [io 0x0960-0x0967]
pci 0000:00:0e.1: reg 1c: [io 0x0b60-0x0b63]
pci 0000:00:0e.1: reg 20: [io 0xc400-0xc40f]
pci 0000:00:0e.1: reg 24: [mem 0xcfffc000-0xcfffcfff]
pci 0000:00:0e.2: [10de:037f] type 00 class 0x010185
pci 0000:00:0e.2: reg 10: [io 0xc000-0xc007]
pci 0000:00:0e.2: reg 14: [io 0xbc00-0xbc03]
pci 0000:00:0e.2: reg 18: [io 0xb800-0xb807]
pci 0000:00:0e.2: reg 1c: [io 0xb400-0xb403]
pci 0000:00:0e.2: reg 20: [io 0xb000-0xb00f]
pci 0000:00:0e.2: reg 24: [mem 0xcfffb000-0xcfffbfff]
pci 0000:00:0f.0: [10de:0370] type 01 class 0x060401
pci 0000:00:0f.1: [10de:0371] type 00 class 0x040300
pci 0000:00:0f.1: reg 10: [mem 0xcfff0000-0xcfff3fff]
pci 0000:00:0f.1: PME# supported from D3hot D3cold
pci 0000:00:11.0: [10de:0373] type 00 class 0x068000
pci 0000:00:11.0: reg 10: [mem 0xcfffa000-0xcfffafff]
pci 0000:00:11.0: reg 14: [io 0xac00-0xac07]
pci 0000:00:11.0: reg 18: [mem 0xcfff9000-0xcfff90ff]
pci 0000:00:11.0: reg 1c: [mem 0xcfff8000-0xcfff800f]
pci 0000:00:11.0: supports D1 D2
pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: [10de:0373] type 00 class 0x068000
pci 0000:00:12.0: reg 10: [mem 0xcfff7000-0xcfff7fff]
pci 0000:00:12.0: reg 14: [io 0xa800-0xa807]
pci 0000:00:12.0: reg 18: [mem 0xcfff6000-0xcfff60ff]
pci 0000:00:12.0: reg 1c: [mem 0xcfff5000-0xcfff500f]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: [10de:0376] type 01 class 0x060400
pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: [10de:05b1] type 01 class 0x060400
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PCI bridge to [bus 01-04]
pci 0000:00:03.0: bridge window [io 0x8000-0x9fff]
pci 0000:00:03.0: bridge window [mem 0xc4000000-0xcbffffff]
pci 0000:00:03.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
pci 0000:02:00.0: [10de:05b1] type 01 class 0x060400
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:02.0: [10de:05b1] type 01 class 0x060400
pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PCI bridge to [bus 02-04]
pci 0000:01:00.0: bridge window [io 0x8000-0x9fff]
pci 0000:01:00.0: bridge window [mem 0xc4000000-0xcbffffff]
pci 0000:01:00.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
pci 0000:03:00.0: [10de:0611] type 00 class 0x030000
pci 0000:03:00.0: reg 10: [mem 0xca000000-0xcaffffff]
pci 0000:03:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:03:00.0: reg 1c: [mem 0xc8000000-0xc9ffffff 64bit]
pci 0000:03:00.0: reg 24: [io 0x9c00-0x9c7f]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0: bridge window [io 0x9000-0x9fff]
pci 0000:02:00.0: bridge window [mem 0xc8000000-0xcbffffff]
pci 0000:02:00.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:04:00.0: [10de:0611] type 00 class 0x030000
pci 0000:04:00.0: reg 10: [mem 0xc6000000-0xc6ffffff]
pci 0000:04:00.0: reg 14: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:04:00.0: reg 1c: [mem 0xc4000000-0xc5ffffff 64bit]
pci 0000:04:00.0: reg 24: [io 0x8c00-0x8c7f]
pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:02:02.0: PCI bridge to [bus 04-04]
pci 0000:02:02.0: bridge window [io 0x8000-0x8fff]
pci 0000:02:02.0: bridge window [mem 0xc4000000-0xc7ffffff]
pci 0000:02:02.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:05:07.0: [104c:8023] type 00 class 0x0c0010
pci 0000:05:07.0: reg 10: [mem 0xcfeff000-0xcfeff7ff]
pci 0000:05:07.0: reg 14: [mem 0xcfef8000-0xcfefbfff]
pci 0000:05:07.0: supports D1 D2
pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot
pci 0000:05:09.0: [1002:4d50] type 00 class 0x048000
pci 0000:05:09.0: reg 10: [mem 0xcfd00000-0xcfdfffff]
pci 0000:05:09.0: reg 14: [mem 0xcc000000-0xcdffffff pref]
pci 0000:00:0f.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:0f.0: bridge window [mem 0xcfd00000-0xcfefffff]
pci 0000:00:0f.0: bridge window [mem 0xcc000000-0xcdffffff pref]
pci 0000:00:0f.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:0f.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:0f.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:0f.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:0f.0: bridge window [mem 0x7ff00000-0xcfffffff] (subtractive decode)
pci 0000:00:13.0: PCI bridge to [bus 06-06]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1c) granted
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LXV5] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LXV6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LXV7] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LXV8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LMC1] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LSA1] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
ACPI: PCI Interrupt Link [AXV5] (IRQs 16) *0
ACPI: PCI Interrupt Link [AXV6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AXV7] (IRQs 16) *0
ACPI: PCI Interrupt Link [AXV8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AUBA] (IRQs 22 23) *0
ACPI: PCI Interrupt Link [AMA1] (IRQs 22 23) *0
ACPI: PCI Interrupt Link [AMAC] (IRQs 22 23) *0
ACPI: PCI Interrupt Link [AAZA] (IRQs 22 23) *0
ACPI: PCI Interrupt Link [AACI] (IRQs 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AMCI] (IRQs 22 23) *0, disabled.
ACPI: PCI Interrupt Link [ASMB] (IRQs 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AUS2] (IRQs 22 23) *0
ACPI: PCI Interrupt Link [AIDE] (IRQs 22 23) *0, disabled.
ACPI: PCI Interrupt Link [ASA0] (IRQs 20 21) *0
ACPI: PCI Interrupt Link [ASA1] (IRQs 20 21) *0
ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21) *0
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:04:00.0
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009b800-0x0009ffff]
e820: reserve RAM buffer [mem 0x7fef0000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x1000-0x107f]
pnp 00:00: [io 0x1080-0x10ff]
pnp 00:00: [io 0x1400-0x147f]
pnp 00:00: [io 0x1480-0x14ff]
pnp 00:00: [io 0x1800-0x187f]
pnp 00:00: [io 0x1880-0x18ff]
system 00:00: [io 0x1000-0x107f] has been reserved
system 00:00: [io 0x1080-0x10ff] has been reserved
system 00:00: [io 0x1400-0x147f] has been reserved
system 00:00: [io 0x1480-0x14ff] has been reserved
system 00:00: [io 0x1800-0x187f] has been reserved
system 00:00: [io 0x1880-0x18ff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [bus 00-ff]
pnp 00:01: [io 0x0cf8-0x0cff]
pnp 00:01: [io 0x0000-0x0cf7 window]
pnp 00:01: [io 0x0d00-0xffff window]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0x000c0000-0x000dffff window]
pnp 00:01: [mem 0x7ff00000-0xcfffffff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:02: [io 0x0010-0x001f]
pnp 00:02: [io 0x0022-0x003f]
pnp 00:02: [io 0x0044-0x005f]
pnp 00:02: [io 0x0062-0x0063]
pnp 00:02: [io 0x0065-0x006f]
pnp 00:02: [io 0x0074-0x007f]
pnp 00:02: [io 0x0091-0x0093]
pnp 00:02: [io 0x00a2-0x00bf]
pnp 00:02: [io 0x00e0-0x00ef]
pnp 00:02: [io 0x04d0-0x04d1]
pnp 00:02: [io 0x0295-0x0314]
pnp 00:02: [io 0x0880-0x088f]
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x0295-0x0314] has been reserved
system 00:02: [io 0x0880-0x088f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io 0x0000-0x000f]
pnp 00:03: [io 0x0080-0x0090]
pnp 00:03: [io 0x0094-0x009f]
pnp 00:03: [io 0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [irq 0 disabled]
pnp 00:04: [irq 8]
pnp 00:04: [mem 0xfeff0000-0xfeff03ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io 0x0070-0x0071]
pnp 00:05: [io 0x0072-0x0073]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [io 0x03f0-0x03f5]
pnp 00:08: [io 0x03f7]
pnp 00:08: [irq 6]
pnp 00:08: [dma 2]
pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:09: [io 0x03f8-0x03ff]
pnp 00:09: [irq 4]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: [io 0x0060]
pnp 00:0a: [io 0x0064]
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0xe0000000-0xefffffff]
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0x000d0000-0x000d3fff]
pnp 00:0c: [mem 0x000d5800-0x000d7fff]
pnp 00:0c: [mem 0x000f0000-0x000fbfff]
pnp 00:0c: [mem 0x000fc000-0x000fffff]
pnp 00:0c: [mem 0x7fef0000-0x7fefffff]
pnp 00:0c: [mem 0xffff0000-0xffffffff]
pnp 00:0c: [mem 0x00000000-0x0009ffff]
pnp 00:0c: [mem 0x00100000-0x7feeffff]
pnp 00:0c: [mem 0xfec00000-0xfec00fff]
pnp 00:0c: [mem 0xd0000000-0xdfffffff]
pnp 00:0c: [mem 0xfee00000-0xfee00fff]
pnp 00:0c: [mem 0xfeff0000]
system 00:0c: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:0c: [mem 0x000d5800-0x000d7fff] has been reserved
system 00:0c: [mem 0x000f0000-0x000fbfff] could not be reserved
system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0c: [mem 0x7fef0000-0x7fefffff] could not be reserved
system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x00100000-0x7feeffff] could not be reserved
system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0c: [mem 0xd0000000-0xdfffffff] has been reserved
system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0c: [mem 0xfeff0000] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:03:00.0: BAR 6: assigned [mem 0xcb000000-0xcb01ffff pref]
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0: bridge window [io 0x9000-0x9fff]
pci 0000:02:00.0: bridge window [mem 0xc8000000-0xcbffffff]
pci 0000:02:00.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:04:00.0: BAR 6: assigned [mem 0xc7000000-0xc701ffff pref]
pci 0000:02:02.0: PCI bridge to [bus 04-04]
pci 0000:02:02.0: bridge window [io 0x8000-0x8fff]
pci 0000:02:02.0: bridge window [mem 0xc4000000-0xc7ffffff]
pci 0000:02:02.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:01:00.0: PCI bridge to [bus 02-04]
pci 0000:01:00.0: bridge window [io 0x8000-0x9fff]
pci 0000:01:00.0: bridge window [mem 0xc4000000-0xcbffffff]
pci 0000:01:00.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 01-04]
pci 0000:00:03.0: bridge window [io 0x8000-0x9fff]
pci 0000:00:03.0: bridge window [mem 0xc4000000-0xcbffffff]
pci 0000:00:03.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
pci 0000:00:0f.0: PCI bridge to [bus 05-05]
pci 0000:00:0f.0: bridge window [mem 0xcfd00000-0xcfefffff]
pci 0000:00:0f.0: bridge window [mem 0xcc000000-0xcdffffff pref]
pci 0000:00:13.0: PCI bridge to [bus 06-06]
pci 0000:00:0f.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x7ff00000-0xcfffffff]
pci_bus 0000:01: resource 0 [io 0x8000-0x9fff]
pci_bus 0000:01: resource 1 [mem 0xc4000000-0xcbffffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x8000-0x9fff]
pci_bus 0000:02: resource 1 [mem 0xc4000000-0xcbffffff]
pci_bus 0000:02: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:03: resource 1 [mem 0xc8000000-0xcbffffff]
pci_bus 0000:03: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:04: resource 1 [mem 0xc4000000-0xc7ffffff]
pci_bus 0000:04: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xcfd00000-0xcfefffff]
pci_bus 0000:05: resource 2 [mem 0xcc000000-0xcdffffff pref]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:05: resource 8 [mem 0x7ff00000-0xcfffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
ACPI: PCI Interrupt Link [AUS2] enabled at IRQ 22
pci 0000:03:00.0: Boot video device
PCI: CLS 64 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1352597712.304:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 3968
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:03.0: irq 40 for MSI/MSI-X
pcieport 0000:00:13.0: irq 41 for MSI/MSI-X
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcieport 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:02:02.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:13.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:13.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
pata_acpi 0000:00:0d.0: setting latency timer to 64
ACPI: PCI Interrupt Link [ASA0] enabled at IRQ 21
pata_acpi 0000:00:0e.0: setting latency timer to 64
ACPI: PCI Interrupt Link [ASA1] enabled at IRQ 20
pata_acpi 0000:00:0e.1: setting latency timer to 64
ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
pata_acpi 0000:00:0e.2: setting latency timer to 64
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:0b.1: setting latency timer to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.1: debug port 1
ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
ehci_hcd 0000:00:0b.1: irq 22, io mem 0xcfffe000
Freeing initrd memory: 14868k freed
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.5.0-18-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:0b.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:0b.0: setting latency timer to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0b.0: irq 23, io mem 0xcffff000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 3.5.0-18-generic ohci_hcd
usb usb2: SerialNumber: 0000:00:0b.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 4:987:558
tty ttyS30: hash matches
misc vga_arbiter: hash matches
pci_link PNP0C0F:09: hash matches
rtc_cmos 00:05: setting system clock to 2012-11-11 01:35:12 UTC (1352597712)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 928k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1464k freed
Freeing unused kernel memory: 1120k freed
udevd[97]: starting version 175
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [AMAC] enabled at IRQ 23
forcedeth 0000:00:11.0: setting latency timer to 64
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
FDC 0 is a post-1991 82077
firewire_ohci 0000:05:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
forcedeth 0000:00:11.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:04:4b:15:2f:3b
forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
ACPI: PCI Interrupt Link [AMA1] enabled at IRQ 22
forcedeth 0000:00:12.0: setting latency timer to 64
firewire_core 0000:05:07.0: created device fw0: GUID 5ad1798a00044b16, S400
usb 2-6: new full-speed USB device number 2 using ohci_hcd
Refined TSC clocksource calibration: 2400.000 MHz.
Switching to clocksource tsc
usb 2-6: New USB device found, idVendor=046d, idProduct=c318
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-6: Product: Logitech Illuminated Keyboard
usb 2-6: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-6/2-6:1.0/input/input2
hid-generic 0003:046D:C318.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:0b.0-6/input0
input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-6/2-6:1.1/input/input3
hid-generic 0003:046D:C318.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:0b.0-6/input1
forcedeth 0000:00:12.0: ifname eth1, PHY OUI 0x5043 @ 2, addr 00:04:4b:15:2f:3c
forcedeth 0000:00:12.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
sata_nv 0000:00:0e.0: version 3.5
sata_nv 0000:00:0e.0: Using SWNCQ mode
sata_nv 0000:00:0e.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 21
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 21
sata_nv 0000:00:0e.1: Using SWNCQ mode
sata_nv 0000:00:0e.1: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 20
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 20
sata_nv 0000:00:0e.2: Using SWNCQ mode
sata_nv 0000:00:0e.2: setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb000 irq 21
ata6: SATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xb008 irq 21
pata_amd 0000:00:0d.0: version 0.4.1
pata_amd 0000:00:0d.0: setting latency timer to 64
scsi6 : pata_amd
scsi7 : pata_amd
ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xec00 irq 14
ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xec08 irq 15
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-6: WDC WD3200JD-22KLB0, 08.05J08, max UDMA/100
ata1.00: 625142448 sectors, multi 16: LBA48
ata3.00: ATA-8: ST3000DM001-9YN166, CC4H, max UDMA/133
ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA WDC WD3200JD-22K 08.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
ata3.00: configured for UDMA/133
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: LITE-ON DVDRW LH-20A1L, BL06, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1L BL06 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
scsi 2:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC4H PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 2:0:0:0: [sdb] 4096-byte physical blocks
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: ST3000DM001-9YN166, CC4H, max UDMA/133
ata4.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC4H PQ: 0 ANSI: 5
sd 3:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 3:0:0:0: [sdc] 4096-byte physical blocks
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 3:0:0:0: [sdc] Attached SCSI disk
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
ata6: SATA link down (SStatus 0 SControl 300)
ata8: port disabled--ignoring
Adding 2094076k swap on /dev/sda5. Priority:-1 extents:1 across:2094076k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
udevd[405]: starting version 175
lp: driver loaded but no devices found
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
i2c i2c-0: nForce2 SMBus adapter at 0xf400
i2c i2c-1: nForce2 SMBus adapter at 0xf000
wmi: Mapper loaded
microcode: CPU0 sig=0x6f7, pf=0x10, revision=0x66
nv_tco: NV TCO WatchDog Timer Driver v0.01
nv_tco: Watchdog reboot detected
nv_tco: initialized (0x1440). heartbeat=30 sec (nowayout=0)
microcode: CPU1 sig=0x6f7, pf=0x10, revision=0x66
microcode: CPU2 sig=0x6f7, pf=0x10, revision=0x66
microcode: CPU3 sig=0x6f7, pf=0x10, revision=0x66
microcode: Microcode Update Driver: v2.00 , Peter Oruba
[drm] Initialized drm 1.1.0 20060810
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
ACPI: PCI Interrupt Link [AXV5] enabled at IRQ 16
[drm] nouveau 0000:03:00.0: Detected an NV50 generation card (0x092880a2)
[drm] nouveau 0000:03:00.0: Checking PRAMIN for VBIOS
[drm] nouveau 0000:03:00.0: ... appears to be valid
[drm] nouveau 0000:03:00.0: Using VBIOS from PRAMIN
[drm] nouveau 0000:03:00.0: BIT BIOS found
[drm] nouveau 0000:03:00.0: Bios version 62.92.24.00
[drm] nouveau 0000:03:00.0: TMDS table version 2.0
[drm] nouveau 0000:03:00.0: MXM: no VBIOS data, nothing to do
[drm] nouveau 0000:03:00.0: DCB version 4.0
[drm] nouveau 0000:03:00.0: DCB outp 00: 02000300 00000028
[drm] nouveau 0000:03:00.0: DCB outp 01: 01000302 00000030
[drm] nouveau 0000:03:00.0: DCB outp 02: 04011310 00000028
[drm] nouveau 0000:03:00.0: DCB outp 03: 02011312 00000030
[drm] nouveau 0000:03:00.0: DCB outp 04: 010223f1 00c0c080
[drm] nouveau 0000:03:00.0: DCB conn 00: 00001030
[drm] nouveau 0000:03:00.0: DCB conn 01: 00002130
[drm] nouveau 0000:03:00.0: DCB conn 02: 00000210
[drm] nouveau 0000:03:00.0: DCB conn 03: 00000211
[drm] nouveau 0000:03:00.0: DCB conn 04: 00000213
[drm] nouveau 0000:03:00.0: Parsing VBIOS init table 0 at offset 0xC17F
[drm] nouveau 0000:03:00.0: Parsing VBIOS init table 1 at offset 0xC530
[drm] nouveau 0000:03:00.0: Parsing VBIOS init table 2 at offset 0xD2AB
[drm] nouveau 0000:03:00.0: Parsing VBIOS init table 3 at offset 0xD3CD
[drm] nouveau 0000:03:00.0: Parsing VBIOS init table 4 at offset 0xD5FD
[drm] nouveau 0000:03:00.0: Parsing VBIOS init table at offset 0xD662
[drm] nouveau 0000:03:00.0: 0xD662: Condition still not met after 20ms, skipping following opcodes
[TTM] Zone kernel: Available graphics memory: 1025022 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] nouveau 0000:03:00.0: Detected 512MiB VRAM (GDDR3)
[drm] nouveau 0000:03:00.0: 512 MiB GART (aperture)
[drm] nouveau 0000:03:00.0: DCB encoder 1 unknown
[drm] nouveau 0000:03:00.0: TV-1 has no encoders, removing
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
hda_intel: Disabling MSI
snd_hda_intel 0000:00:0f.1: setting latency timer to 64
adt7475 4-002e: ADT7473 device, revision 1
[drm] nouveau 0000:03:00.0: Detected monitoring device: adt7473
[drm] nouveau 0000:03:00.0: 1 available performance level(s)
[drm] nouveau 0000:03:00.0: 3: core 650MHz shader 1620MHz memory 950MHz fanspeed 100%
[drm] nouveau 0000:03:00.0: c: core 399MHz shader 810MHz memory 399MHz voltage 1050mV
[drm] nouveau 0000:03:00.0: MM: using CRYPT for buffer copies
[drm] nouveau 0000:03:00.0: allocated 1680x1050 fb: 0x2c0000, bo ffff8800788b3000
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 210x65
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 1.0.0 20120316 for 0000:03:00.0 on minor 0
nouveau 0000:04:00.0: enabling device (0000 -> 0003)
ACPI: PCI Interrupt Link [AXV7] enabled at IRQ 16
[drm] nouveau 0000:04:00.0: Detected an NV50 generation card (0x092880a2)
[drm] nouveau 0000:04:00.0: Checking PRAMIN for VBIOS
[drm] nouveau 0000:04:00.0: ... BIOS signature not found
[drm] nouveau 0000:04:00.0: Checking PROM for VBIOS
type=1400 audit(1352597722.435:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=743 comm="apparmor_parser"
type=1400 audit(1352597722.435:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=744 comm="apparmor_parser"
type=1400 audit(1352597722.435:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=743 comm="apparmor_parser"
type=1400 audit(1352597722.435:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=744 comm="apparmor_parser"
type=1400 audit(1352597722.435:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=743 comm="apparmor_parser"
type=1400 audit(1352597722.435:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=744 comm="apparmor_parser"
type=1400 audit(1352597722.435:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=745 comm="apparmor_parser"
type=1400 audit(1352597722.435:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=745 comm="apparmor_parser"
type=1400 audit(1352597722.435:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=745 comm="apparmor_parser"
[drm] nouveau 0000:04:00.0: ... appears to be valid
[drm] nouveau 0000:04:00.0: Using VBIOS from PROM
[drm] nouveau 0000:04:00.0: BIT BIOS found
[drm] nouveau 0000:04:00.0: Bios version 62.92.24.00
[drm] nouveau 0000:04:00.0: TMDS table version 2.0
[drm] nouveau 0000:04:00.0: MXM: no VBIOS data, nothing to do
[drm] nouveau 0000:04:00.0: DCB version 4.0
[drm] nouveau 0000:04:00.0: DCB outp 00: 02000300 00000028
[drm] nouveau 0000:04:00.0: DCB outp 01: 01000302 00000030
[drm] nouveau 0000:04:00.0: DCB outp 02: 04011310 00000028
[drm] nouveau 0000:04:00.0: DCB outp 03: 02011312 00000030
[drm] nouveau 0000:04:00.0: DCB outp 04: 010223f1 00c0c080
[drm] nouveau 0000:04:00.0: DCB conn 00: 00001030
[drm] nouveau 0000:04:00.0: DCB conn 01: 00002130
[drm] nouveau 0000:04:00.0: DCB conn 02: 00000210
[drm] nouveau 0000:04:00.0: DCB conn 03: 00000211
[drm] nouveau 0000:04:00.0: DCB conn 04: 00000213
[drm] nouveau 0000:04:00.0: Adaptor not initialised, running VBIOS init tables.
[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 0 at offset 0xC17F
[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 1 at offset 0xC530
[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 2 at offset 0xD2AB
[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 3 at offset 0xD3CD
[drm] nouveau 0000:04:00.0: Parsing VBIOS init table 4 at offset 0xD5FD
[drm] nouveau 0000:04:00.0: Parsing VBIOS init table at offset 0xD662
[drm] nouveau 0000:04:00.0: Detected 512MiB VRAM (GDDR3)
[drm] nouveau 0000:04:00.0: 512 MiB GART (aperture)
[drm] nouveau 0000:04:00.0: DCB encoder 1 unknown
[drm] nouveau 0000:04:00.0: TV-2 has no encoders, removing
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
adt7475 7-002e: ADT7473 device, revision 1
[drm] nouveau 0000:04:00.0: Detected monitoring device: adt7473
[drm] nouveau 0000:04:00.0: 1 available performance level(s)
[drm] nouveau 0000:04:00.0: 3: core 650MHz shader 1620MHz memory 950MHz fanspeed 100%
[drm] nouveau 0000:04:00.0: c: core 399MHz shader 810MHz memory 399MHz voltage 1050mV
[drm] nouveau 0000:04:00.0: MM: using CRYPT for buffer copies
No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
[drm] nouveau 0000:04:00.0: allocated 1024x768 fb: 0x2c0000, bo ffff8800798a8000
fb1: nouveaufb frame buffer device
[drm] Initialized nouveau 1.0.0 20120316 for 0000:04:00.0 on minor 1
init: failsafe main process (856) killed by TERM signal
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
input: HDA NVidia Line as /devices/pci0000:00/0000:00:0f.1/sound/card0/input4
input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:0f.1/sound/card0/input5
input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:0f.1/sound/card0/input6
input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:0f.1/sound/card0/input7
input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:0f.1/sound/card0/input8
input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:0f.1/sound/card0/input9
input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:0f.1/sound/card0/input10
input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:0f.1/sound/card0/input11
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1352597724.347:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=966 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
forcedeth 0000:00:11.0: irq 42 for MSI/MSI-X
forcedeth 0000:00:11.0: eth0: MSI enabled
forcedeth 0000:00:12.0: irq 43 for MSI/MSI-X
forcedeth 0000:00:12.0: eth1: MSI enabled
forcedeth 0000:00:12.0: eth1: no link during initialization
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
audit_printk_skb: 3 callbacks suppressed
type=1400 audit(1352597727.923:13): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1063 comm="apparmor_parser"
type=1400 audit(1352597727.923:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1063 comm="apparmor_parser"
type=1400 audit(1352597727.923:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1063 comm="apparmor_parser"
type=1400 audit(1352597727.967:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1062 comm="apparmor_parser"
type=1400 audit(1352597727.967:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1060 comm="apparmor_parser"
type=1400 audit(1352597727.967:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=1062 comm="apparmor_parser"
type=1400 audit(1352597727.967:19): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1060 comm="apparmor_parser"
type=1400 audit(1352597727.967:20): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1061 comm="apparmor_parser"
type=1400 audit(1352597727.967:21): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1061 comm="apparmor_parser"
type=1400 audit(1352597727.971:22): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1067 comm="apparmor_parser"
vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=none
vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
usb 2-10: new low-speed USB device number 3 using ohci_hcd
usb 2-10: New USB device found, idVendor=0461, idProduct=4d22
usb 2-10: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-10: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-10/2-10:1.0/input/input12
hid-generic 0003:0461:4D22.0003: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:0b.0-10/input0