dmesg - Default
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
BIOS-e820: [mem 0x000000000008f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000c851cfff] usable
BIOS-e820: [mem 0x00000000c851d000-0x00000000c8600fff] ACPI NVS
BIOS-e820: [mem 0x00000000c8601000-0x00000000c8c22fff] usable
BIOS-e820: [mem 0x00000000c8c23000-0x00000000c8d22fff] ACPI NVS
BIOS-e820: [mem 0x00000000c8d23000-0x00000000c8e20fff] usable
BIOS-e820: [mem 0x00000000c8e21000-0x00000000c8ea0fff] reserved
BIOS-e820: [mem 0x00000000c8ea1000-0x00000000cb6b8fff] usable
BIOS-e820: [mem 0x00000000cb6b9000-0x00000000cb6befff] reserved
BIOS-e820: [mem 0x00000000cb6bf000-0x00000000cb716fff] usable
BIOS-e820: [mem 0x00000000cb717000-0x00000000cb7befff] ACPI NVS
BIOS-e820: [mem 0x00000000cb7bf000-0x00000000cb7dffff] usable
BIOS-e820: [mem 0x00000000cb7e0000-0x00000000cb7f1fff] ACPI data
BIOS-e820: [mem 0x00000000cb7f2000-0x00000000cb7f2fff] usable
BIOS-e820: [mem 0x00000000cb7f3000-0x00000000cb7fefff] ACPI data
BIOS-e820: [mem 0x00000000cb7ff000-0x00000000cb7fffff] usable
BIOS-e820: [mem 0x00000000cb800000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
NX (Execute Disable) protection: active
DMI 2.6 present.
DMI: /DX79SI, BIOS SIX7910J.86A.0494.2012.0424.1039 04/24/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0000CC000000 mask 3FFFFC000000 uncachable
1 base 0000D0000000 mask 3FFFF0000000 uncachable
2 base 0000E0000000 mask 3FFFF0000000 uncachable
3 base 0000F0000000 mask 3FFFF8000000 uncachable
4 base 0000F8000000 mask 3FFFFC000000 uncachable
5 base 0000FC000000 mask 3FFFFE000000 uncachable
6 base 0000FE000000 mask 3FFFFF000000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xcb800 max_arch_pfn = 0x400000000
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000089000] 89000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xcb7fffff]
[mem 0x00000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcb7fffff] page 2M
kernel direct mapping tables up to 0xcb7fffff @ [mem 0x1fffe000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x22fffffff]
[mem 0x100000000-0x1ffffffff] page 1G
[mem 0x200000000-0x22fffffff] page 2M
kernel direct mapping tables up to 0x22fffffff @ [mem 0xcb7de000-0xcb7dffff]
RAMDISK: [mem 0x362e0000-0x37167fff]
ACPI: RSDP 00000000000fe020 00024 (v02 INTEL )
ACPI: XSDT 00000000cb7fd120 0005C (v01 INTEL DX79SI 000001EE 01000013)
ACPI: FACP 00000000cb7fc000 000F4 (v03 INTEL DX79SI 000001EE MSFT 0100000D)
ACPI: DSDT 00000000cb7f7000 04F75 (v02 INTEL DX79SI 000001EE MSFT 0100000D)
ACPI: FACS 00000000cb721000 00040
ACPI: APIC 00000000cb7f6000 00138 (v02 INTEL DX79SI 000001EE MSFT 0100000D)
ACPI: MCFG 00000000cb7f5000 0003C (v01 INTEL DX79SI 000001EE MSFT 0100000D)
ACPI: ASF! 00000000cb7f4000 000A5 (v32 INTEL DX79SI 000001EE MSFT 0100000D)
ACPI: HPET 00000000cb7f3000 00038 (v01 INTEL DX79SI 000001EE MSFT 0100000D)
ACPI: ASPT 00000000cb7f1000 00034 (v07 INTEL DX79SI 000001EE MSFT 0100000D)
ACPI: SSDT 00000000cb7e1000 0F054 (v01 INTEL SSDT PM 000001EE MSFT 0100000D)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022fffffff]
Initmem setup node 0 [mem 0x00000000-0x22fffffff]
NODE_DATA [mem 0x22fffc000-0x22fffffff]
[ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x22fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0008efff]
node 0: [mem 0x00100000-0xc851cfff]
node 0: [mem 0xc8601000-0xc8c22fff]
node 0: [mem 0xc8d23000-0xc8e20fff]
node 0: [mem 0xc8ea1000-0xcb6b8fff]
node 0: [mem 0xcb6bf000-0xcb716fff]
node 0: [mem 0xcb7bf000-0xcb7dffff]
node 0: [mem 0xcb7f2000-0xcb7f2fff]
node 0: [mem 0xcb7ff000-0xcb7fffff]
node 0: [mem 0x100000000-0x22fffffff]
On node 0 totalpages: 2077775
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3897 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 812304 pages, LIFO batch:31
Normal zone: 19456 pages used for memmap
Normal zone: 1225728 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xfec3f000] gsi_base[24])
IOAPIC[1]: apic_id 1, version 32, address 0xfec3f000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 16 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000008f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000c851d000 - 00000000c8601000
PM: Registered nosave memory: 00000000c8c23000 - 00000000c8d23000
PM: Registered nosave memory: 00000000c8e21000 - 00000000c8ea1000
PM: Registered nosave memory: 00000000cb6b9000 - 00000000cb6bf000
PM: Registered nosave memory: 00000000cb717000 - 00000000cb7bf000
PM: Registered nosave memory: 00000000cb7e0000 - 00000000cb7f2000
PM: Registered nosave memory: 00000000cb7f3000 - 00000000cb7ff000
PM: Registered nosave memory: 00000000cb800000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 0000000100000000
e820: [mem 0xd0000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s83584 r8192 d22912 u131072
pcpu-alloc: s83584 r8192 d22912 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2041929
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8081456k/9175040k available (6711k kernel code, 863940k absent, 229644k reserved, 6459k data, 928k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:1216 16
Extended CMOS year: 2000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3300.050 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6600.10 BogoMIPS (lpj=13200200)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 18 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 25118 entries in 99 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7-3960X CPU @ 3.30GHz stepping 06
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 519380657 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11
Brought up 12 CPUs
Total of 12 processors activated (79201.20 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xc851d000-0xc8600fff] (933888 bytes)
PM: Registering ACPI NVS region [mem 0xc8c23000-0xc8d22fff] (1048576 bytes)
PM: Registering ACPI NVS region [mem 0xcb717000-0xcb7befff] (688128 bytes)
dummy:
RTC time: 18:00:34, date: 10/26/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: >host bridge window [mem 0xd0000000-0xefffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >root bus resource [mem 0xd0000000-0xefffffff]
pci 0000:00:00.0: >[8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: >[8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: >[8086:3c03] type 01 class 0x060400
pci 0000:00:01.1: >PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: >[8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: >[8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: >[8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: >[8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: >[8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: >reg 10: [mem 0xe0526000-0xe0526fff]
pci 0000:00:11.0: >[8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: >[8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: >reg 10: [mem 0xe0528100-0xe052810f 64bit]
pci 0000:00:16.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: >[8086:1502] type 00 class 0x020000
pci 0000:00:19.0: >reg 10: [mem 0xe0500000-0xe051ffff]
pci 0000:00:19.0: >reg 14: [mem 0xe0525000-0xe0525fff]
pci 0000:00:19.0: >reg 18: [io 0x4040-0x405f]
pci 0000:00:19.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: >[8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: >reg 10: [mem 0xe0527c00-0xe0527fff]
pci 0000:00:1a.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: >[8086:1d20] type 00 class 0x040300
pci 0000:00:1b.0: >reg 10: [mem 0xe0520000-0xe0523fff 64bit]
pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: >[8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: >[8086:1d14] type 01 class 0x060400
pci 0000:00:1c.2: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: >[8086:1d16] type 01 class 0x060400
pci 0000:00:1c.3: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: >[8086:1d1a] type 01 class 0x060400
pci 0000:00:1c.5: >PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: >[8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: >reg 10: [mem 0xe0527800-0xe0527bff]
pci 0000:00:1d.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: >[8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: >[8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: >[8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: >reg 10: [io 0x4068-0x406f]
pci 0000:00:1f.2: >reg 14: [io 0x4074-0x4077]
pci 0000:00:1f.2: >reg 18: [io 0x4060-0x4067]
pci 0000:00:1f.2: >reg 1c: [io 0x4070-0x4073]
pci 0000:00:1f.2: >reg 20: [io 0x4020-0x403f]
pci 0000:00:1f.2: >reg 24: [mem 0xe0527000-0xe05277ff]
pci 0000:00:1f.2: >PME# supported from D3hot
pci 0000:00:1f.3: >[8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: >reg 10: [mem 0xe0528000-0xe05280ff 64bit]
pci 0000:00:1f.3: >reg 20: [io 0x4000-0x401f]
pci 0000:00:01.0: >PCI bridge to [bus 01-01]
pci 0000:02:00.0: >[1033:0194] type 00 class 0x0c0330
pci 0000:02:00.0: >reg 10: [mem 0xe0400000-0xe0401fff 64bit]
pci 0000:02:00.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: >PCI bridge to [bus 02-02]
pci 0000:00:01.1: > bridge window [mem 0xe0400000-0xe04fffff]
pci 0000:03:00.0: >[1002:9498] type 00 class 0x030000
pci 0000:03:00.0: >reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: >reg 18: [mem 0xe0300000-0xe030ffff 64bit]
pci 0000:03:00.0: >reg 20: [io 0x3000-0x30ff]
pci 0000:03:00.0: >reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:03:00.0: >supports D1 D2
pci 0000:03:00.1: >[1002:aa38] type 00 class 0x040300
pci 0000:03:00.1: >reg 10: [mem 0xe0310000-0xe0313fff 64bit]
pci 0000:03:00.1: >supports D1 D2
pci 0000:00:02.0: >PCI bridge to [bus 03-03]
pci 0000:00:02.0: > bridge window [io 0x3000-0x3fff]
pci 0000:00:02.0: > bridge window [mem 0xe0300000-0xe03fffff]
pci 0000:00:02.0: > bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:03.0: >PCI bridge to [bus 04-04]
pci 0000:00:11.0: >PCI bridge to [bus 05-05]
pci 0000:00:1c.0: >PCI bridge to [bus 06-06]
pci 0000:07:00.0: >[1106:3403] type 00 class 0x0c0010
pci 0000:07:00.0: >reg 10: [mem 0xe0200000-0xe02007ff 64bit]
pci 0000:07:00.0: >reg 18: [io 0x2000-0x20ff]
pci 0000:07:00.0: >supports D2
pci 0000:07:00.0: >PME# supported from D2 D3hot D3cold
pci 0000:00:1c.2: >PCI bridge to [bus 07-07]
pci 0000:00:1c.2: > bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: > bridge window [mem 0xe0200000-0xe02fffff]
pci 0000:08:00.0: >[1033:0194] type 00 class 0x0c0330
pci 0000:08:00.0: >reg 10: [mem 0xe0100000-0xe0101fff 64bit]
pci 0000:08:00.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: >PCI bridge to [bus 08-08]
pci 0000:00:1c.3: > bridge window [mem 0xe0100000-0xe01fffff]
pci 0000:09:00.0: >[8086:10d3] type 00 class 0x020000
pci 0000:09:00.0: >reg 10: [mem 0xe0000000-0xe001ffff]
pci 0000:09:00.0: >reg 18: [io 0x1000-0x101f]
pci 0000:09:00.0: >reg 1c: [mem 0xe0020000-0xe0023fff]
pci 0000:09:00.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: >PCI bridge to [bus 09-09]
pci 0000:00:1c.5: > bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.5: > bridge window [mem 0xe0000000-0xe00fffff]
pci 0000:00:1e.0: >PCI bridge to [bus 0a-0a] (subtractive decode)
pci 0000:00:1e.0: > bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: > bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0xd0000000-0xefffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EVRP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.JEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.JEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG2._PRT]
pci0000:00: >Requesting ACPI _OSC control (0x1d)
pci0000:00: >ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 3f
PCI: root bus 3f: using default resources
PCI: Probing PCI hardware (bus 3f)
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: >root bus resource [io 0x0000-0xffff]
pci_bus 0000:3f: >root bus resource [mem 0x00000000-0x3fffffffffff]
pci 0000:3f:08.0: >[8086:3c80] type 00 class 0x088000
pci 0000:3f:09.0: >[8086:3c90] type 00 class 0x088000
pci 0000:3f:0a.0: >[8086:3cc0] type 00 class 0x088000
pci 0000:3f:0a.1: >[8086:3cc1] type 00 class 0x088000
pci 0000:3f:0a.2: >[8086:3cc2] type 00 class 0x088000
pci 0000:3f:0a.3: >[8086:3cd0] type 00 class 0x088000
pci 0000:3f:0b.0: >[8086:3ce0] type 00 class 0x088000
pci 0000:3f:0b.3: >[8086:3ce3] type 00 class 0x088000
pci 0000:3f:0c.0: >[8086:3ce8] type 00 class 0x088000
pci 0000:3f:0c.1: >[8086:3ce8] type 00 class 0x088000
pci 0000:3f:0c.2: >[8086:3ce8] type 00 class 0x088000
pci 0000:3f:0c.6: >[8086:3cf4] type 00 class 0x088000
pci 0000:3f:0c.7: >[8086:3cf6] type 00 class 0x088000
pci 0000:3f:0d.0: >[8086:3ce8] type 00 class 0x088000
pci 0000:3f:0d.1: >[8086:3ce8] type 00 class 0x088000
pci 0000:3f:0d.2: >[8086:3ce8] type 00 class 0x088000
pci 0000:3f:0d.6: >[8086:3cf5] type 00 class 0x088000
pci 0000:3f:0e.0: >[8086:3ca0] type 00 class 0x088000
pci 0000:3f:0e.1: >[8086:3c46] type 00 class 0x110100
pci 0000:3f:0f.0: >[8086:3ca8] type 00 class 0x088000
pci 0000:3f:0f.1: >[8086:3c71] type 00 class 0x088000
pci 0000:3f:0f.2: >[8086:3caa] type 00 class 0x088000
pci 0000:3f:0f.3: >[8086:3cab] type 00 class 0x088000
pci 0000:3f:0f.4: >[8086:3cac] type 00 class 0x088000
pci 0000:3f:0f.5: >[8086:3cad] type 00 class 0x088000
pci 0000:3f:0f.6: >[8086:3cae] type 00 class 0x088000
pci 0000:3f:10.0: >[8086:3cb0] type 00 class 0x088000
pci 0000:3f:10.1: >[8086:3cb1] type 00 class 0x088000
pci 0000:3f:10.2: >[8086:3cb2] type 00 class 0x088000
pci 0000:3f:10.3: >[8086:3cb3] type 00 class 0x088000
pci 0000:3f:10.4: >[8086:3cb4] type 00 class 0x088000
pci 0000:3f:10.5: >[8086:3cb5] type 00 class 0x088000
pci 0000:3f:10.6: >[8086:3cb6] type 00 class 0x088000
pci 0000:3f:10.7: >[8086:3cb7] type 00 class 0x088000
pci 0000:3f:11.0: >[8086:3cb8] type 00 class 0x088000
pci 0000:3f:13.0: >[8086:3ce4] type 00 class 0x088000
pci 0000:3f:13.1: >[8086:3c43] type 00 class 0x110100
pci 0000:3f:13.4: >[8086:3ce6] type 00 class 0x110100
pci 0000:3f:13.5: >[8086:3c44] type 00 class 0x110100
pci 0000:3f:13.6: >[8086:3c45] type 00 class 0x088000
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
e820: reserve RAM buffer [mem 0xc851d000-0xcbffffff]
e820: reserve RAM buffer [mem 0xc8c23000-0xcbffffff]
e820: reserve RAM buffer [mem 0xc8e21000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcb6b9000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcb717000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcb7e0000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcb7f3000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcb800000-0xcbffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-3e]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0000-0x0cf7 window]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0xd0000000-0xefffffff window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: >[mem 0xf0000000-0x107ffffff]
pnp 00:01: >[mem 0xf8000000-0xffffffff]
system 00:01: >[mem 0xf0000000-0x107ffffff] could not be reserved
system 00:01: >[mem 0xf8000000-0xffffffff] could not be reserved
system 00:01: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: >[io 0x0000-0x000f]
pnp 00:02: >[io 0x0081-0x0083]
pnp 00:02: >[io 0x0087]
pnp 00:02: >[io 0x0089-0x008b]
pnp 00:02: >[io 0x008f]
pnp 00:02: >[io 0x00c0-0x00df]
pnp 00:02: >[dma 4]
pnp 00:02: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: >[io 0x0070-0x0071]
pnp 00:03: >[io 0x0074-0x0077]
pnp 00:03: >[irq 8]
pnp 00:03: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: >[io 0x00f0]
pnp 00:04: >[irq 13]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: >[io 0x0061]
pnp 00:05: >Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: >[io 0x0454-0x0457]
system 00:06: >[io 0x0454-0x0457] has been reserved
system 00:06: >Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:07: >[io 0x0500-0x057f]
pnp 00:07: >[io 0x0400-0x0453]
pnp 00:07: >[io 0x0458-0x047f]
pnp 00:07: >[io 0x0092]
pnp 00:07: >[io 0x0062]
pnp 00:07: >[io 0x0066]
pnp 00:07: >[io 0x0680-0x06ff]
pnp 00:07: >[io 0x0010-0x001f]
pnp 00:07: >[io 0x0072-0x0073]
pnp 00:07: >[io 0x0080]
pnp 00:07: >[io 0x0084-0x0086]
pnp 00:07: >[io 0x0088]
pnp 00:07: >[io 0x008c-0x008e]
pnp 00:07: >[io 0x0090-0x009f]
system 00:07: >[io 0x0500-0x057f] has been reserved
system 00:07: >[io 0x0400-0x0453] has been reserved
system 00:07: >[io 0x0458-0x047f] has been reserved
system 00:07: >[io 0x0680-0x06ff] has been reserved
system 00:07: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: >[io 0x0060]
pnp 00:08: >[io 0x0064]
system 00:08: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: >[mem 0xfec00000-0xfec000ff]
pnp 00:09: >Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:0a: >[mem 0xfed00000-0xfed03fff]
pnp 00:0a: >Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:03:00.0: >no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:00:01.0: >PCI bridge to [bus 01-01]
pci 0000:00:01.1: >PCI bridge to [bus 02-02]
pci 0000:00:01.1: > bridge window [mem 0xe0400000-0xe04fffff]
pci 0000:03:00.0: >BAR 6: assigned [mem 0xe0320000-0xe033ffff pref]
pci 0000:00:02.0: >PCI bridge to [bus 03-03]
pci 0000:00:02.0: > bridge window [io 0x3000-0x3fff]
pci 0000:00:02.0: > bridge window [mem 0xe0300000-0xe03fffff]
pci 0000:00:02.0: > bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:03.0: >PCI bridge to [bus 04-04]
pci 0000:00:11.0: >PCI bridge to [bus 05-05]
pci 0000:00:1c.0: >PCI bridge to [bus 06-06]
pci 0000:00:1c.2: >PCI bridge to [bus 07-07]
pci 0000:00:1c.2: > bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: > bridge window [mem 0xe0200000-0xe02fffff]
pci 0000:00:1c.3: >PCI bridge to [bus 08-08]
pci 0000:00:1c.3: > bridge window [mem 0xe0100000-0xe01fffff]
pci 0000:00:1c.5: >PCI bridge to [bus 09-09]
pci 0000:00:1c.5: > bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.5: > bridge window [mem 0xe0000000-0xe00fffff]
pci 0000:00:1e.0: >PCI bridge to [bus 0a-0a]
pci 0000:00:1e.0: >setting latency timer to 64
pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 7 [mem 0xd0000000-0xefffffff]
pci_bus 0000:02: >resource 1 [mem 0xe0400000-0xe04fffff]
pci_bus 0000:03: >resource 0 [io 0x3000-0x3fff]
pci_bus 0000:03: >resource 1 [mem 0xe0300000-0xe03fffff]
pci_bus 0000:03: >resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:07: >resource 0 [io 0x2000-0x2fff]
pci_bus 0000:07: >resource 1 [mem 0xe0200000-0xe02fffff]
pci_bus 0000:08: >resource 1 [mem 0xe0100000-0xe01fffff]
pci_bus 0000:09: >resource 0 [io 0x1000-0x1fff]
pci_bus 0000:09: >resource 1 [mem 0xe0000000-0xe00fffff]
pci_bus 0000:0a: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0a: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0a: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0a: >resource 7 [mem 0xd0000000-0xefffffff]
pci_bus 0000:3f: >resource 4 [io 0x0000-0xffff]
pci_bus 0000:3f: >resource 5 [mem 0x00000000-0x3fffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: >Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc451d000-0xc851cfff] (64MB) mapped at [ffff8800c451d000-ffff8800c851cfff]
audit: initializing netlink socket (disabled)
type=2000 audit(1351274434.400:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 15784
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: >irq 64 for MSI/MSI-X
pcieport 0000:00:01.1: >irq 65 for MSI/MSI-X
pcieport 0000:00:02.0: >irq 66 for MSI/MSI-X
pcieport 0000:00:03.0: >irq 67 for MSI/MSI-X
pcieport 0000:00:11.0: >irq 68 for MSI/MSI-X
pcieport 0000:00:1c.0: >irq 69 for MSI/MSI-X
pcieport 0000:00:1c.2: >irq 70 for MSI/MSI-X
pcieport 0000:00:1c.3: >irq 71 for MSI/MSI-X
pcieport 0000:00:1c.5: >irq 72 for MSI/MSI-X
aer 0000:00:01.0:pcie02: >service driver aer loaded
aer 0000:00:01.1:pcie02: >service driver aer loaded
aer 0000:00:02.0:pcie02: >service driver aer loaded
aer 0000:00:03.0:pcie02: >service driver aer loaded
aer 0000:00:11.0:pcie02: >service driver aer loaded
pcieport 0000:00:01.0: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:01.1: >Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.1:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:02.0: >Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: >Signaling PME through PCIe PME interrupt
pci 0000:03:00.1: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:03.0: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:11.0: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:11.0:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:1c.0: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:1c.2: >Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:1c.3: >Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: >service driver pcie_pme loaded
pcieport 0000:00:1c.5: >Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: >Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: >service driver pcie_pme loaded
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
Freeing initrd memory: 14880k freed
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: >version 3.0
ahci 0000:00:1f.2: >irq 73 for MSI/MSI-X
ahci 0000:00:1f.2: >AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xa impl SATA mode
ahci 0000:00:1f.2: >flags: 64bit ncq sntf pm led clo pio slum part ems apst
ahci 0000:00:1f.2: >setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xe0527000 port 0xe0527180 irq 73
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xe0527000 port 0xe0527280 irq 73
ata5: DUMMY
ata6: DUMMY
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: >setting latency timer to 64
ehci_hcd 0000:00:1a.0: >EHCI Host Controller
ehci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: >debug port 2
ehci_hcd 0000:00:1a.0: >cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: >irq 16, io mem 0xe0527c00
ehci_hcd 0000:00:1a.0: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb1: >SerialNumber: 0000:00:1a.0
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >2 ports detected
ehci_hcd 0000:00:1d.0: >setting latency timer to 64
ehci_hcd 0000:00:1d.0: >EHCI Host Controller
ehci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: >debug port 2
ehci_hcd 0000:00:1d.0: >cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: >irq 23, io mem 0xe0527800
ehci_hcd 0000:00:1d.0: >USB 2.0 started, EHCI 1.00
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: EHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb2: >SerialNumber: 0000:00:1d.0
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:02:00.0: >xHCI Host Controller
xhci_hcd 0000:02:00.0: >new USB bus registered, assigned bus number 3
xhci_hcd 0000:02:00.0: >irq 16, io mem 0xe0400000
xhci_hcd 0000:02:00.0: >irq 74 for MSI/MSI-X
xhci_hcd 0000:02:00.0: >irq 75 for MSI/MSI-X
xhci_hcd 0000:02:00.0: >irq 76 for MSI/MSI-X
xhci_hcd 0000:02:00.0: >irq 77 for MSI/MSI-X
xhci_hcd 0000:02:00.0: >irq 78 for MSI/MSI-X
xhci_hcd 0000:02:00.0: >irq 79 for MSI/MSI-X
xhci_hcd 0000:02:00.0: >irq 80 for MSI/MSI-X
xhci_hcd 0000:02:00.0: >irq 81 for MSI/MSI-X
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: xHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb3: >SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >2 ports detected
xhci_hcd 0000:02:00.0: >xHCI Host Controller
xhci_hcd 0000:02:00.0: >new USB bus registered, assigned bus number 4
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: xHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb4: >SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >2 ports detected
xhci_hcd 0000:08:00.0: >xHCI Host Controller
xhci_hcd 0000:08:00.0: >new USB bus registered, assigned bus number 5
xhci_hcd 0000:08:00.0: >irq 19, io mem 0xe0100000
xhci_hcd 0000:08:00.0: >irq 82 for MSI/MSI-X
xhci_hcd 0000:08:00.0: >irq 83 for MSI/MSI-X
xhci_hcd 0000:08:00.0: >irq 84 for MSI/MSI-X
xhci_hcd 0000:08:00.0: >irq 85 for MSI/MSI-X
xhci_hcd 0000:08:00.0: >irq 86 for MSI/MSI-X
xhci_hcd 0000:08:00.0: >irq 87 for MSI/MSI-X
xhci_hcd 0000:08:00.0: >irq 88 for MSI/MSI-X
xhci_hcd 0000:08:00.0: >irq 89 for MSI/MSI-X
usb usb5: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: >Product: xHCI Host Controller
usb usb5: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb5: >SerialNumber: 0000:08:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: >USB hub found
hub 5-0:1.0: >2 ports detected
xhci_hcd 0000:08:00.0: >xHCI Host Controller
xhci_hcd 0000:08:00.0: >new USB bus registered, assigned bus number 6
usb usb6: >New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: >Product: xHCI Host Controller
usb usb6: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
usb usb6: >SerialNumber: 0000:08:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: >USB hub found
hub 6-0:1.0: >2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: >RTC can wake from S4
rtc_cmos 00:03: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 0:849:39
bdi 7:4: >hash matches
rtc_cmos 00:03: >setting system clock to 2012-10-26 18:00:34 UTC (1351274434)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: OCZ-VERTEX, 1.30, max UDMA/133
ata2.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: >Direct-Access ATA OCZ-VERTEX 1.30 PQ: 0 ANSI: 5
sd 1:0:0:0: >Attached scsi generic sg0 type 0
sd 1:0:0:0: >[sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 1:0:0:0: >[sda] Write Protect is off
sd 1:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata4.00: ATAPI: ATAPI iHAS124 Y, BL0W, max UDMA/100
sda: sda1 sda2 < sda5 >
sd 1:0:0:0: >[sda] Attached SCSI disk
ata4.00: configured for UDMA/100
scsi 3:0:0:0: >CD-ROM ATAPI iHAS124 Y BL0W PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
usb 1-1: >new high-speed USB device number 2 using ehci_hcd
sr 3:0:0:0: >Attached scsi CD-ROM sr0
sr 3:0:0:0: >Attached scsi generic sg1 type 5
Freeing unused kernel memory: 928k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1472k freed
Freeing unused kernel memory: 1124k freed
udevd[147]: starting version 175
e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
e1000e 0000:00:19.0: >setting latency timer to 64
e1000e 0000:00:19.0: >Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: >irq 90 for MSI/MSI-X
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
firewire_ohci 0000:07:00.0: >added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
EXT4-fs (sda1): recovery complete
usb 1-1: >New USB device found, idVendor=8087, idProduct=0024
usb 1-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: >USB hub found
hub 1-1:1.0: >6 ports detected
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1: >new high-speed USB device number 2 using ehci_hcd
e1000e 0000:00:19.0: >eth0: (PCI Express:2.5GT/s:Width x1) 38:60:77:5a:29:44
e1000e 0000:00:19.0: >eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: >eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
e1000e 0000:09:00.0: >Disabling ASPM L0s L1
e1000e 0000:09:00.0: >Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:09:00.0: >irq 91 for MSI/MSI-X
e1000e 0000:09:00.0: >irq 92 for MSI/MSI-X
e1000e 0000:09:00.0: >irq 93 for MSI/MSI-X
usb 2-1: >New USB device found, idVendor=8087, idProduct=0024
usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: >USB hub found
hub 2-1:1.0: >8 ports detected
e1000e 0000:09:00.0: >eth1: (PCI Express:2.5GT/s:Width x1) 38:60:77:5a:29:45
e1000e 0000:09:00.0: >eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:09:00.0: >eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
usb 1-1.1: >new low-speed USB device number 3 using ehci_hcd
usb 1-1.1: >New USB device found, idVendor=047d, idProduct=2043
usb 1-1.1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1: >Product: Kensington U+P Keyboard
usb 1-1.1: >Manufacturer: NOVATEK
firewire_core 0000:07:00.0: created device fw0: GUID e0cb4e000004db61, S400
usb 1-1.2: >new full-speed USB device number 4 using ehci_hcd
usb 1-1.2: >New USB device found, idVendor=1532, idProduct=0007
usb 1-1.2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: >Product: DeathAdder
usb 1-1.2: >Manufacturer: Razer
Adding 8309756k swap on /dev/sda5. Priority:-1 extents:1 across:8309756k SS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
udevd[500]: starting version 175
lp: driver loaded but no devices found
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
EDAC MC: Ver: 2.1.0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
microcode: CPU0 sig=0x206d6, pf=0x4, revision=0x616
ACPI Warning: 0x00000000fed1f410-0x00000000fed1f414 SystemMemory conflicts with Region \_SB_.PCI0.SRCR 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \IGPO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (RV730 0x1002:0x9498 0x174B:0xE880).
[drm] register mmio base: 0xE0300000
[drm] register mmio size: 65536
ATOM BIOS: RV730PRO
radeon 0000:03:00.0: >VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:03:00.0: >GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 4049930 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:03:00.0: >irq 94 for MSI/MSI-X
radeon 0000:03:00.0: >radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
mei 0000:00:16.0: >setting latency timer to 64
mei 0000:00:16.0: >irq 95 for MSI/MSI-X
[drm] Loading RV730 Microcode
mei 0000:00:16.0: >wd: failed to find the client
microcode: CPU1 sig=0x206d6, pf=0x4, revision=0x616
microcode: CPU2 sig=0x206d6, pf=0x4, revision=0x616
snd_hda_intel 0000:00:1b.0: >irq 96 for MSI/MSI-X
microcode: CPU3 sig=0x206d6, pf=0x4, revision=0x616
microcode: CPU4 sig=0x206d6, pf=0x4, revision=0x616
microcode: CPU5 sig=0x206d6, pf=0x4, revision=0x616
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:03:00.0: >WB enabled
radeon 0000:03:00.0: >fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88021edb7c00
microcode: CPU6 sig=0x206d6, pf=0x4, revision=0x616
microcode: CPU7 sig=0x206d6, pf=0x4, revision=0x616
microcode: CPU8 sig=0x206d6, pf=0x4, revision=0x616
microcode: CPU9 sig=0x206d6, pf=0x4, revision=0x616
microcode: CPU10 sig=0x206d6, pf=0x4, revision=0x616
microcode: CPU11 sig=0x206d6, pf=0x4, revision=0x616
microcode: Microcode Update Driver: v2.00 , Peter Oruba
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input2
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[drm] ring test on 0 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DVI-I-1
[drm] HPD2
[drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[drm] Encoders:
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] DFP2: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] DIN-1
[drm] Encoders:
[drm] TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm] DVI-I-2
[drm] HPD1
[drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] DFP1: INTERNAL_UNIPHY
[drm] radeon: power management initialized
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: NOVATEK Kensington U+P Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input9
hid-generic 0003:047D:2043.0001: >input,hidraw0: USB HID v1.10 Keyboard [NOVATEK Kensington U+P Keyboard] on usb-0000:00:1a.0-1.1/input0
input: NOVATEK Kensington U+P Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input10
hid-generic 0003:047D:2043.0002: >input,hidraw1: USB HID v1.10 Device [NOVATEK Kensington U+P Keyboard] on usb-0000:00:1a.0-1.1/input1
input: Razer DeathAdder as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input11
hid-generic 0003:1532:0007.0003: >input,hidraw2: USB HID v1.11 Mouse [Razer DeathAdder] on usb-0000:00:1a.0-1.2/input0
[drm] fb mappable at 0xD0142000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.18.0 20080528 for 0000:03:00.0 on minor 0
hda-intel: 0000:03:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:03:00.1: >irq 97 for MSI/MSI-X
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input12
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
init: failsafe main process (928) killed by TERM signal
type=1400 audit(1351274437.025:2): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1018 comm="apparmor_parser"
type=1400 audit(1351274437.025:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1016 comm="apparmor_parser"
type=1400 audit(1351274437.025:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1015 comm="apparmor_parser"
type=1400 audit(1351274437.025:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1009 comm="apparmor_parser"
type=1400 audit(1351274437.025:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1011 comm="apparmor_parser"
type=1400 audit(1351274437.025:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1016 comm="apparmor_parser"
type=1400 audit(1351274437.025:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1009 comm="apparmor_parser"
type=1400 audit(1351274437.025:9): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1012 comm="apparmor_parser"
type=1400 audit(1351274437.025:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1015 comm="apparmor_parser"
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ppdev: user-space parallel port driver
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
e1000e 0000:00:19.0: >irq 90 for MSI/MSI-X
e1000e 0000:00:19.0: >irq 90 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready