dmesg - Niti_CPU
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-220.el6.x86_64 (mockbuild@x86-004.build.bos.redhat.com) (gcc version 4.4.5 20110214 (Red Hat 4.4.5-6) (GCC) ) #1 SMP Wed Nov 9 08:03:13 EST 2011
Command line: ro root=/dev/mapper/vg00-lvol1 intel_iommu=on rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=vg00/lvol2 rd_NO_MD rd_LVM_LV=vg00/lvol1 SYSFONT=latarcyrheb-sun16 rhgb crashkernel=auto quiet KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000f362f000 (usable)
BIOS-e820: 00000000f362f000 - 00000000f363c000 (ACPI data)
BIOS-e820: 00000000f363c000 - 00000000f363d000 (usable)
BIOS-e820: 00000000f363d000 - 00000000f8000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000180bfff000 (usable)
DMI 2.7 present.
SMBIOS version 2.7 @ 0xF4F40
DMI: HP ProLiant BL460c G7, BIOS I27 05/05/2011
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x180bfff max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00F4000000 mask FFFC000000 uncachable
1 base 00F8000000 mask FFF8000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xf363d max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000f363d000
0000000000 - 00c0000000 page 1G
00c0000000 - 00f3600000 page 2M
00f3600000 - 00f363d000 page 4k
kernel direct mapping tables up to f363d000 @ 8000-b000
init_memory_mapping: 0000000100000000-000000180bfff000
0100000000 - 1800000000 page 1G
1800000000 - 180be00000 page 2M
180be00000 - 180bfff000 page 4k
kernel direct mapping tables up to 180bfff000 @ a000-d000
RAMDISK: 7b9da000 - 7ffffe00
ACPI: RSDP 00000000000f4f00 00024 (v02 HP )
ACPI: XSDT 00000000f3630040 000AC (v01 HP ProLiant 00000002 Ò? 0000162E)
ACPI: FACP 00000000f3630140 000F4 (v03 HP ProLiant 00000002 Ò? 0000162E)
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20090903/tbfadt-607)
ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8 (20090903/tbfadt-607)
ACPI: DSDT 00000000f3630240 0204D (v01 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 00000000f362f100 00040
ACPI: SPCR 00000000f362f140 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E)
ACPI: MCFG 00000000f362f1c0 0003C (v01 HP ProLiant 00000001 00000000)
ACPI: HPET 00000000f362f200 00038 (v01 HP ProLiant 00000002 Ò? 0000162E)
ACPI: FFFF 00000000f362f240 00064 (v02 HP ProLiant 00000002 Ò? 0000162E)
ACPI: SPMI 00000000f362f2c0 00040 (v05 HP ProLiant 00000001 Ò? 0000162E)
ACPI: ERST 00000000f362f300 001D0 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: APIC 00000000f362f500 0015E (v01 HP ProLiant 00000002 00000000)
ACPI: SRAT 00000000f362f680 00570 (v01 HP Proliant 00000001 Ò? 0000162E)
ACPI: FFFF 00000000f362fc00 00176 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: BERT 00000000f362fd80 00030 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: HEST 00000000f362fdc0 000BC (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: DMAR 00000000f362fe80 00154 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: SSDT 00000000f36322c0 00125 (v03 HP CRSPCI0 00000002 HP 00000001)
ACPI: SSDT 00000000f3632400 003BB (v01 HP pcc 00000001 INTL 20090625)
ACPI: SSDT 00000000f36327c0 00377 (v01 HP pmab 00000001 INTL 20090625)
ACPI: SSDT 00000000f3632b40 04104 (v01 INTEL PPM RCM 00000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 0 -> APIC 2 -> Node 0
SRAT: PXM 0 -> APIC 3 -> Node 0
SRAT: PXM 0 -> APIC 4 -> Node 0
SRAT: PXM 0 -> APIC 5 -> Node 0
SRAT: PXM 0 -> APIC 16 -> Node 0
SRAT: PXM 0 -> APIC 17 -> Node 0
SRAT: PXM 0 -> APIC 18 -> Node 0
SRAT: PXM 0 -> APIC 19 -> Node 0
SRAT: PXM 0 -> APIC 20 -> Node 0
SRAT: PXM 0 -> APIC 21 -> Node 0
SRAT: PXM 1 -> APIC 32 -> Node 1
SRAT: PXM 1 -> APIC 33 -> Node 1
SRAT: PXM 1 -> APIC 34 -> Node 1
SRAT: PXM 1 -> APIC 35 -> Node 1
SRAT: PXM 1 -> APIC 36 -> Node 1
SRAT: PXM 1 -> APIC 37 -> Node 1
SRAT: PXM 1 -> APIC 48 -> Node 1
SRAT: PXM 1 -> APIC 49 -> Node 1
SRAT: PXM 1 -> APIC 50 -> Node 1
SRAT: PXM 1 -> APIC 51 -> Node 1
SRAT: PXM 1 -> APIC 52 -> Node 1
SRAT: PXM 1 -> APIC 53 -> Node 1
SRAT: Node 0 PXM 0 0-f4000000
SRAT: Node 0 PXM 0 100000000-c0c000000
SRAT: Node 1 PXM 1 c0c000000-180c000000
NUMA: Allocated memnodemap from c000 - cc40
NUMA: Using 26 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000c0c000000
NODE_DATA [000000000000cc40 - 0000000000040c3f]
bootmap [0000000000100000 - 00000000002817ff] pages 182
(9 early reservations) ==> bootmem [0000000000 - 0c0c000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000200c7e4] TEXT DATA BSS ==> [0001000000 - 000200c7e4]
#3 [007b9da000 - 007ffffe00] RAMDISK ==> [007b9da000 - 007ffffe00]
#4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
#5 [000200d000 - 000200d184] BRK ==> [000200d000 - 000200d184]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 000000c000] PGTABLE ==> [000000a000 - 000000c000]
#8 [000000c000 - 000000cc40] MEMNODEMAP ==> [000000c000 - 000000cc40]
Bootmem setup node 1 0000000c0c000000-000000180bfff000
NODE_DATA [0000000c0c000040 - 0000000c0c03403f]
bootmap [0000000c0c035000 - 0000000c0c1b4fff] pages 180
(9 early reservations) ==> bootmem [0c0c000000 - 180bfff000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 000200c7e4] TEXT DATA BSS
#3 [007b9da000 - 007ffffe00] RAMDISK
#4 [000009ec00 - 0000100000] BIOS reserved
#5 [000200d000 - 000200d184] BRK
#6 [0000008000 - 000000a000] PGTABLE
#7 [000000a000 - 000000c000] PGTABLE
#8 [000000c000 - 000000cc40] MEMNODEMAP
found SMP MP-table at [ffff8800000f4f80] f4f80
Reserving 135MB of memory at 48MB for crashkernel (System RAM: 98495MB)
[ffffea002a380000-ffffea002a3fffff] potential offnode page_structs
[ffffea0000000000-ffffea002a3fffff] PMD -> [ffff880028600000-ffff8800529fffff] on node 0
[ffffea002a400000-ffffea003fffffff] PMD -> [ffff880c0c200000-ffff880c21dfffff] on node 1
[ffffea0040000000-ffffea00543fffff] PMD -> [ffff880c22000000-ffff880c363fffff] on node 1
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0180bfff
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000001 -> 0x0000009e
0: 0x00000100 -> 0x000f362f
0: 0x000f363c -> 0x000f363d
0: 0x00100000 -> 0x00c0c000
1: 0x00c0c000 -> 0x0180bfff
On node 0 totalpages: 12580301
DMA zone: 56 pages used for memmap
DMA zone: 104 pages reserved
DMA zone: 3837 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 978536 pages, LIFO batch:31
Normal zone: 158368 pages used for memmap
Normal zone: 11425120 pages, LIFO batch:31
On node 1 totalpages: 12582911
Normal zone: 172032 pages used for memmap
Normal zone: 12410879 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x30] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x34] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x32] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x26] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x16] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x36] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x31] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x35] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x33] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x27] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x17] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x37] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x00] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 0, version 32, address 0xfec80000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 32 CPUs, 8 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000f362f000 - 00000000f363c000
PM: Registered nosave memory: 00000000f363d000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fee10000
PM: Registered nosave memory: 00000000fee10000 - 00000000ff800000
PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
Allocating PCI resources starting at f8000000 (gap: f8000000:6c00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:2
PERCPU: Embedded 30 pages/cpu @ffff880028200000 s92696 r8192 d21992 u131072
pcpu-alloc: s92696 r8192 d21992 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 02 04 06 08 10 12 14 16 18 20 22 25 27 29 31
pcpu-alloc: [1] 01 03 05 07 09 11 13 15 17 19 21 23 24 26 28 30
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 24818372
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg00-lvol1 intel_iommu=on rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=vg00/lvol2 rd_NO_MD rd_LVM_LV=vg00/lvol1 SYSFONT=latarcyrheb-sun16 rhgb crashkernel=135M@0M quiet KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM
Intel-IOMMU: enabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Memory: 99041148k/100859900k available (5084k kernel code, 207052k absent, 1611700k reserved, 7229k data, 1244k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1072
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 806354944 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 3066.811 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6133.62 BogoMIPS (lpj=3066811)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20776 entries in 82 pages
DMAR: Host address width 39
DMAR: DRHD base: 0x000000f8ffe000 flags: 0x1
IOMMU f8ffe000: ver 1:0 cap c90780106f0462 ecap f0207e
DMAR: RMRR base: 0x000000f37fc000 end: 0x000000f37fdfff
DMAR: RMRR base: 0x000000f37f5000 end: 0x000000f37fafff
DMAR: RMRR base: 0x000000f363e000 end: 0x000000f363ffff
DMAR: ATSR flags: 0x0
IOAPIC id 8 under DRHD base 0xf8ffe000
IOAPIC id 0 under DRHD base 0xf8ffe000
Enabled IRQ remapping in xapic mode
Setting APIC routing to physical flat
alloc irq_desc for 48 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU X5675 @ 3.07GHz stepping 02
Performance Events: PEBS fmt1+, Westmere events, Broken BIOS detected, complain to your hardware vendor.
[Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 Ok.
Booting Node 1, Processors #2 Ok.
Booting Node 0, Processors #3 Ok.
Booting Node 1, Processors #4 Ok.
Booting Node 0, Processors #5 Ok.
Booting Node 1, Processors #6 Ok.
Booting Node 0, Processors #7 Ok.
Booting Node 1, Processors #8 Ok.
Booting Node 0, Processors #9 Ok.
Booting Node 1, Processors #10 Ok.
Booting Node 0, Processors #11 Ok.
Booting Node 1, Processors #12 Ok.
Booting Node 0, Processors #13 Ok.
Booting Node 1, Processors #14 Ok.
Booting Node 0, Processors #15 Ok.
Booting Node 1, Processors #16 Ok.
Booting Node 0, Processors #17 Ok.
Booting Node 1, Processors #18 Ok.
Booting Node 0, Processors #19 Ok.
Booting Node 1, Processors #20 Ok.
Booting Node 0, Processors #21 Ok.
Booting Node 1, Processors #22 Ok.
Booting Node 0, Processors #23
Brought up 24 CPUs
Total of 24 processors activated (147197.57 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2616 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f4000000 segment 0 buses 0 - 63
PCI: MCFG area at f4000000 reserved in E820
PCI: Using MMCONFIG at f4000000 - f7ffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x1000-0x101f]
pci 0000:00:1d.1: reg 20 io port: [0x1020-0x103f]
pci 0000:00:1d.2: reg 20 io port: [0x1040-0x105f]
pci 0000:00:1d.3: reg 20 io port: [0x1060-0x107f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfacf0000-0xfacf03ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:02:00.0: reg 10 64bit mmio: [0xfbcf0000-0xfbcf3fff]
pci 0000:02:00.0: reg 18 64bit mmio: [0xfbcc0000-0xfbcdffff]
pci 0000:02:00.0: reg 20 64bit mmio: [0xfbca0000-0xfbcbffff]
pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x03ffff]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: reg 10 64bit mmio: [0xfbc90000-0xfbc93fff]
pci 0000:02:00.1: reg 18 64bit mmio: [0xfbc60000-0xfbc7ffff]
pci 0000:02:00.1: reg 20 64bit mmio: [0xfbc40000-0xfbc5ffff]
pci 0000:02:00.1: reg 30 32bit mmio pref: [0x000000-0x03ffff]
pci 0000:02:00.1: PME# supported from D3hot D3cold
pci 0000:02:00.1: PME# disabled
pci 0000:02:00.2: reg 10 64bit mmio: [0xfbc30000-0xfbc33fff]
pci 0000:02:00.2: reg 18 64bit mmio: [0xfbc00000-0xfbc1ffff]
pci 0000:02:00.2: reg 20 64bit mmio: [0xfbbe0000-0xfbbfffff]
pci 0000:02:00.2: reg 30 32bit mmio pref: [0x000000-0x00ffff]
pci 0000:02:00.2: PME# supported from D3hot D3cold
pci 0000:02:00.2: PME# disabled
pci 0000:02:00.3: reg 10 64bit mmio: [0xfbbd0000-0xfbbd3fff]
pci 0000:02:00.3: reg 18 64bit mmio: [0xfbba0000-0xfbbbffff]
pci 0000:02:00.3: reg 20 64bit mmio: [0xfbb80000-0xfbb9ffff]
pci 0000:02:00.3: reg 30 32bit mmio pref: [0x000000-0x00ffff]
pci 0000:02:00.3: PME# supported from D3hot D3cold
pci 0000:02:00.3: PME# disabled
pci 0000:02:00.4: reg 10 64bit mmio: [0xfbb70000-0xfbb73fff]
pci 0000:02:00.4: reg 18 64bit mmio: [0xfbb40000-0xfbb5ffff]
pci 0000:02:00.4: reg 20 64bit mmio: [0xfbb20000-0xfbb3ffff]
pci 0000:02:00.4: reg 30 32bit mmio pref: [0x000000-0x03ffff]
pci 0000:02:00.4: PME# supported from D3hot D3cold
pci 0000:02:00.4: PME# disabled
pci 0000:02:00.5: reg 10 64bit mmio: [0xfbb10000-0xfbb13fff]
pci 0000:02:00.5: reg 18 64bit mmio: [0xfbae0000-0xfbafffff]
pci 0000:02:00.5: reg 20 64bit mmio: [0xfbac0000-0xfbadffff]
pci 0000:02:00.5: reg 30 32bit mmio pref: [0x000000-0x03ffff]
pci 0000:02:00.5: PME# supported from D3hot D3cold
pci 0000:02:00.5: PME# disabled
pci 0000:02:00.6: reg 10 64bit mmio: [0xfbab0000-0xfbab3fff]
pci 0000:02:00.6: reg 18 64bit mmio: [0xfba80000-0xfba9ffff]
pci 0000:02:00.6: reg 20 64bit mmio: [0xfba60000-0xfba7ffff]
pci 0000:02:00.6: reg 30 32bit mmio pref: [0x000000-0x03ffff]
pci 0000:02:00.6: PME# supported from D3hot D3cold
pci 0000:02:00.6: PME# disabled
pci 0000:02:00.7: reg 10 64bit mmio: [0xfba50000-0xfba53fff]
pci 0000:02:00.7: reg 18 64bit mmio: [0xfba20000-0xfba3ffff]
pci 0000:02:00.7: reg 20 64bit mmio: [0xfba00000-0xfba1ffff]
pci 0000:02:00.7: reg 30 32bit mmio pref: [0x000000-0x03ffff]
pci 0000:02:00.7: PME# supported from D3hot D3cold
pci 0000:02:00.7: PME# disabled
pci 0000:00:03.0: bridge 32bit mmio: [0xfba00000-0xfbcfffff]
pci 0000:0c:00.0: reg 10 64bit mmio: [0xfbe00000-0xfbffffff]
pci 0000:0c:00.0: reg 18 64bit mmio: [0xfbdf0000-0xfbdf0fff]
pci 0000:0c:00.0: reg 20 io port: [0x3000-0x30ff]
pci 0000:0c:00.0: reg 30 32bit mmio pref: [0x000000-0x07ffff]
pci 0000:0c:00.0: PME# supported from D0
pci 0000:0c:00.0: PME# disabled
pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xfbd00000-0xfbffffff]
pci 0000:01:00.0: reg 10 io port: [0x2000-0x20ff]
pci 0000:01:00.0: reg 14 32bit mmio: [0xfb9f0000-0xfb9f01ff]
pci 0000:01:00.0: reg 18 io port: [0x2400-0x24ff]
pci 0000:01:00.1: reg 10 32bit mmio pref: [0xf9000000-0xf9ffffff]
pci 0000:01:00.1: reg 14 32bit mmio: [0xfb9e0000-0xfb9e3fff]
pci 0000:01:00.1: reg 18 32bit mmio: [0xfb000000-0xfb7fffff]
pci 0000:01:00.2: reg 10 io port: [0x2800-0x28ff]
pci 0000:01:00.2: reg 14 32bit mmio: [0xfaff0000-0xfaff00ff]
pci 0000:01:00.2: reg 18 32bit mmio: [0xfae00000-0xfaefffff]
pci 0000:01:00.2: reg 1c 32bit mmio: [0xfad80000-0xfadfffff]
pci 0000:01:00.2: reg 20 32bit mmio: [0xfad70000-0xfad77fff]
pci 0000:01:00.2: reg 24 32bit mmio: [0xfad60000-0xfad67fff]
pci 0000:01:00.2: reg 30 32bit mmio pref: [0x000000-0x00ffff]
pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
pci 0000:01:00.2: PME# disabled
pci 0000:01:00.4: reg 20 io port: [0x2c00-0x2c1f]
pci 0000:00:1c.4: bridge io port: [0x2000-0x2fff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xfad00000-0xfb9fffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf9000000-0xf9ffffff]
pci 0000:00:1e.0: transparent bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT07._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT09._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11)
vgaarb: device added: PCI:0000:01:00.1,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.1
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x408-0x40f has been reserved
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x700-0x71f has been reserved
system 00:01: ioport range 0x880-0x8ff has been reserved
system 00:01: ioport range 0x900-0x97f has been reserved
system 00:01: ioport range 0xcd4-0xcd7 has been reserved
system 00:01: ioport range 0xcd0-0xcd3 has been reserved
system 00:01: ioport range 0xf50-0xf58 has been reserved
system 00:01: ioport range 0xca0-0xca1 has been reserved
system 00:01: ioport range 0xca4-0xca5 has been reserved
system 00:01: ioport range 0x3f8-0x3ff has been reserved
system 00:01: iomem range 0xf4000000-0xf7ffffff has been reserved
system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
system 00:01: iomem range 0xf8ffe000-0xf8ffffff has been reserved
pci 0000:00:01.0: PCI bridge to [bus 03-05]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:03
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem disabled]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:02.0: PCI bridge to [bus 0d-0d]
pci 0000:00:02.0: PCI bridge, secondary bus 0000:0d
pci 0000:00:02.0: bridge window [io disabled]
pci 0000:00:02.0: bridge window [mem disabled]
pci 0000:00:02.0: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
pci 0000:00:03.0: bridge window [io disabled]
pci 0000:00:03.0: bridge window [0xfba00000-0xfbcfffff]
pci 0000:00:03.0: bridge window [0xf8000000-0xf81fffff]
pci 0000:00:04.0: PCI bridge to [bus 0e-0e]
pci 0000:00:04.0: PCI bridge, secondary bus 0000:0e
pci 0000:00:04.0: bridge window [io disabled]
pci 0000:00:04.0: bridge window [mem disabled]
pci 0000:00:04.0: bridge window [mem pref disabled]
pci 0000:00:05.0: PCI bridge to [bus 0f-0f]
pci 0000:00:05.0: PCI bridge, secondary bus 0000:0f
pci 0000:00:05.0: bridge window [io disabled]
pci 0000:00:05.0: bridge window [mem disabled]
pci 0000:00:05.0: bridge window [mem pref disabled]
pci 0000:00:06.0: PCI bridge to [bus 10-10]
pci 0000:00:06.0: PCI bridge, secondary bus 0000:10
pci 0000:00:06.0: bridge window [io disabled]
pci 0000:00:06.0: bridge window [mem disabled]
pci 0000:00:06.0: bridge window [mem pref disabled]
pci 0000:00:07.0: PCI bridge to [bus 06-08]
pci 0000:00:07.0: PCI bridge, secondary bus 0000:06
pci 0000:00:07.0: bridge window [io disabled]
pci 0000:00:07.0: bridge window [mem disabled]
pci 0000:00:07.0: bridge window [mem pref disabled]
pci 0000:00:08.0: PCI bridge to [bus 11-11]
pci 0000:00:08.0: PCI bridge, secondary bus 0000:11
pci 0000:00:08.0: bridge window [io disabled]
pci 0000:00:08.0: bridge window [mem disabled]
pci 0000:00:08.0: bridge window [mem pref disabled]
pci 0000:00:09.0: PCI bridge to [bus 09-0b]
pci 0000:00:09.0: PCI bridge, secondary bus 0000:09
pci 0000:00:09.0: bridge window [io disabled]
pci 0000:00:09.0: bridge window [mem disabled]
pci 0000:00:09.0: bridge window [mem pref disabled]
pci 0000:00:0a.0: PCI bridge to [bus 12-12]
pci 0000:00:0a.0: PCI bridge, secondary bus 0000:12
pci 0000:00:0a.0: bridge window [io disabled]
pci 0000:00:0a.0: bridge window [mem disabled]
pci 0000:00:0a.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 0c-0c]
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0c
pci 0000:00:1c.0: bridge window [0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [0xfbd00000-0xfbffffff]
pci 0000:00:1c.0: bridge window [0xf8200000-0xf82fffff]
pci 0000:00:1c.4: PCI bridge to [bus 01-01]
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.4: bridge window [0x2000-0x2fff]
pci 0000:00:1c.4: bridge window [0xfad00000-0xfb9fffff]
pci 0000:00:1c.4: bridge window [0xf9000000-0xf9ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 13-13]
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:13
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:08.0: setting latency timer to 64
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0a.0: setting latency timer to 64
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 1 mem: [0xfba00000-0xfbcfffff]
pci_bus 0000:02: resource 2 pref mem [0xf8000000-0xf81fffff]
pci_bus 0000:0c: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:0c: resource 1 mem: [0xfbd00000-0xfbffffff]
pci_bus 0000:0c: resource 2 pref mem [0xf8200000-0xf82fffff]
pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:01: resource 1 mem: [0xfad00000-0xfb9fffff]
pci_bus 0000:01: resource 2 pref mem [0xf9000000-0xf9ffffff]
pci_bus 0000:13: resource 3 io: [0x00-0xffff]
pci_bus 0000:13: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:01:00.1: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 71831k freed
IOMMU 0xf8ffe000: using Queued invalidation
IOMMU: Setting RMRR:
IOMMU: Setting identity map for device 0000:0c:00.0 [0xf363e000 - 0xf3640000]
IOMMU: Setting identity map for device 0000:01:00.0 [0xf363e000 - 0xf3640000]
IOMMU: Setting identity map for device 0000:01:00.2 [0xf363e000 - 0xf3640000]
IOMMU: Setting identity map for device 0000:00:1d.0 [0xf37f5000 - 0xf37fb000]
IOMMU: Setting identity map for device 0000:00:1d.1 [0xf37f5000 - 0xf37fb000]
IOMMU: Setting identity map for device 0000:00:1d.2 [0xf37f5000 - 0xf37fb000]
IOMMU: Setting identity map for device 0000:00:1d.3 [0xf37f5000 - 0xf37fb000]
IOMMU: Setting identity map for device 0000:01:00.0 [0xf37f5000 - 0xf37fb000]
IOMMU: Setting identity map for device 0000:01:00.2 [0xf37f5000 - 0xf37fb000]
IOMMU: Setting identity map for device 0000:01:00.4 [0xf37f5000 - 0xf37fb000]
IOMMU: Setting identity map for device 0000:00:1d.7 [0xf37fc000 - 0xf37fe000]
IOMMU: Prepare 0-16MiB unity mapping for LPC
IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0x1000000]
PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
audit: initializing netlink socket (disabled)
type=2000 audit(1350571424.667:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 4BB1E63D18B42658
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 49 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.0: irq 49 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 50 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.4: irq 50 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
processor LNXCPU:04: registered as cooling_device4
processor LNXCPU:05: registered as cooling_device5
processor LNXCPU:08: registered as cooling_device6
processor LNXCPU:09: registered as cooling_device7
processor LNXCPU:0a: registered as cooling_device8
processor LNXCPU:0b: registered as cooling_device9
processor LNXCPU:0c: registered as cooling_device10
processor LNXCPU:0d: registered as cooling_device11
processor LNXCPU:10: registered as cooling_device12
processor LNXCPU:11: registered as cooling_device13
processor LNXCPU:12: registered as cooling_device14
processor LNXCPU:13: registered as cooling_device15
processor LNXCPU:14: registered as cooling_device16
processor LNXCPU:15: registered as cooling_device17
processor LNXCPU:18: registered as cooling_device18
processor LNXCPU:19: registered as cooling_device19
processor LNXCPU:1a: registered as cooling_device20
processor LNXCPU:1b: registered as cooling_device21
processor LNXCPU:1c: registered as cooling_device22
processor LNXCPU:1d: registered as cooling_device23
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (8 C)
ERST: Can not request iomem region for ERST.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfacf0000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-220.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-220.el6.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 23, io base 0x00001020
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-220.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001040
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-220.el6.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001060
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-220.el6.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
uhci_hcd 0000:01:00.4: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:01:00.4: setting latency timer to 64
uhci_hcd 0000:01:00.4: UHCI Host Controller
uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 6
uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:00.4: irq 17, io base 0x00002c00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-220.el6.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:01:00.4
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:0a: RTC can wake from S4
rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:0a: setting system clock to 2012-10-18 14:43:47 UTC (1350571427)
Initalizing network drop monitor service
Freeing unused kernel memory: 1244k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1040k freed
Freeing unused kernel memory: 1760k freed
dracut: dracut-004-256.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
iscsi: registered transport (cxgb3i)
Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
iscsi: registered transport (cxgb4i)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.7 (July 20, 2011)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.0.3 (Jun 15, 2010)
iscsi: registered transport (bnx2i)
iscsi: registered transport (be2iscsi)
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: dm-devel@redhat.com
udev: starting version 147
usb 6-1: new full speed USB device using uhci_hcd and address 2
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
usb 6-1: New USB device found, idVendor=03f0, idProduct=7029
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: Virtual Keyboard
usb 6-1: Manufacturer: HP
usb 6-1: configuration #1 chosen from 1 choice
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1c.4/0000:01:00.4/usb6/6-1/6-1:1.0/input/input2
generic-usb 0003:03F0:7029.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard ] on usb-0000:01:00.4-1/input0
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1c.4/0000:01:00.4/usb6/6-1/6-1:1.1/input/input3
generic-usb 0003:03F0:7029.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard ] on usb-0000:01:00.4-1/input1
HP HPSA Driver (v 2.0.2-3)
hpsa 0000:0c:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hpsa 0000:0c:00.0: MSIX
alloc irq_desc for 51 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
hpsa 0000:0c:00.0: irq 51 for MSI/MSI-X
alloc irq_desc for 52 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
hpsa 0000:0c:00.0: irq 52 for MSI/MSI-X
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
hpsa 0000:0c:00.0: irq 53 for MSI/MSI-X
alloc irq_desc for 54 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
hpsa 0000:0c:00.0: irq 54 for MSI/MSI-X
hpsa 0000:0c:00.0: hpsa0: at IRQ 51 using DAC
scsi0 : hpsa
hpsa 0000:0c:00.0: RAID device c0b0t0l0 added.
hpsa 0000:0c:00.0: Direct-Access device c0b0t0l1 added.
scsi 0:0:0:0: RAID HP P410i 5.70 PQ: 0 ANSI: 5
scsi 0:0:0:1: Direct-Access HP LOGICAL VOLUME 5.70 PQ: 0 ANSI: 5
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
be2net 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
be2net 0000:02:00.0: setting latency timer to 64
be2net 0000:02:00.0: No support for multiple RX queues
alloc irq_desc for 55 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
be2net 0000:02:00.0: irq 55 for MSI/MSI-X
alloc irq_desc for 56 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
be2net 0000:02:00.0: irq 56 for MSI/MSI-X
be2net 0000:02:00.0: No support for multiple RX queues
be2net 0000:02:00.0: Can create only 1 RX queues
be2net 0000:02:00.0: Emulex OneConnect 10Gbps NIC(be3) port 0
alloc irq_desc for 34 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
be2net 0000:02:00.1: PCI INT B -> GSI 34 (level, low) -> IRQ 34
be2net 0000:02:00.1: setting latency timer to 64
be2net 0000:02:00.1: No support for multiple RX queues
alloc irq_desc for 57 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
be2net 0000:02:00.1: irq 57 for MSI/MSI-X
alloc irq_desc for 58 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
be2net 0000:02:00.1: irq 58 for MSI/MSI-X
be2net 0000:02:00.1: No support for multiple RX queues
be2net 0000:02:00.1: Can create only 1 RX queues
be2net 0000:02:00.1: Emulex OneConnect 10Gbps NIC(be3) port 1
alloc irq_desc for 35 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
be2net 0000:02:00.2: PCI INT C -> GSI 35 (level, low) -> IRQ 35
be2net 0000:02:00.2: setting latency timer to 64
be2net 0000:02:00.2: No support for multiple RX queues
alloc irq_desc for 59 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
be2net 0000:02:00.2: irq 59 for MSI/MSI-X
alloc irq_desc for 60 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
be2net 0000:02:00.2: irq 60 for MSI/MSI-X
be2net 0000:02:00.2: No support for multiple RX queues
be2net 0000:02:00.2: Can create only 1 RX queues
be2net 0000:02:00.2: Emulex OneConnect 10Gbps NIC(be3) port 0
alloc irq_desc for 36 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
be2net 0000:02:00.3: PCI INT D -> GSI 36 (level, low) -> IRQ 36
be2net 0000:02:00.3: setting latency timer to 64
be2net 0000:02:00.3: No support for multiple RX queues
alloc irq_desc for 61 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
be2net 0000:02:00.3: irq 61 for MSI/MSI-X
alloc irq_desc for 62 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
be2net 0000:02:00.3: irq 62 for MSI/MSI-X
be2net 0000:02:00.3: No support for multiple RX queues
be2net 0000:02:00.3: Can create only 1 RX queues
be2net 0000:02:00.3: Emulex OneConnect 10Gbps NIC(be3) port 1
be2net 0000:02:00.4: PCI INT A -> GSI 24 (level, low) -> IRQ 24
be2net 0000:02:00.4: setting latency timer to 64
be2net 0000:02:00.4: No support for multiple RX queues
alloc irq_desc for 63 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
be2net 0000:02:00.4: irq 63 for MSI/MSI-X
alloc irq_desc for 64 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
be2net 0000:02:00.4: irq 64 for MSI/MSI-X
be2net 0000:02:00.4: No support for multiple RX queues
be2net 0000:02:00.4: Can create only 1 RX queues
be2net 0000:02:00.4: Emulex OneConnect 10Gbps NIC(be3) port 0
be2net 0000:02:00.5: PCI INT B -> GSI 34 (level, low) -> IRQ 34
be2net 0000:02:00.5: setting latency timer to 64
be2net 0000:02:00.5: No support for multiple RX queues
alloc irq_desc for 65 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
be2net 0000:02:00.5: irq 65 for MSI/MSI-X
alloc irq_desc for 66 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
be2net 0000:02:00.5: irq 66 for MSI/MSI-X
be2net 0000:02:00.5: No support for multiple RX queues
be2net 0000:02:00.5: Can create only 1 RX queues
be2net 0000:02:00.5: Emulex OneConnect 10Gbps NIC(be3) port 1
be2net 0000:02:00.6: PCI INT C -> GSI 35 (level, low) -> IRQ 35
be2net 0000:02:00.6: setting latency timer to 64
be2net 0000:02:00.6: No support for multiple RX queues
alloc irq_desc for 67 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
be2net 0000:02:00.6: irq 67 for MSI/MSI-X
alloc irq_desc for 68 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
be2net 0000:02:00.6: irq 68 for MSI/MSI-X
be2net 0000:02:00.6: No support for multiple RX queues
be2net 0000:02:00.6: Can create only 1 RX queues
be2net 0000:02:00.6: Emulex OneConnect 10Gbps NIC(be3) port 0
be2net 0000:02:00.7: PCI INT D -> GSI 36 (level, low) -> IRQ 36
be2net 0000:02:00.7: setting latency timer to 64
be2net 0000:02:00.7: No support for multiple RX queues
alloc irq_desc for 69 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
be2net 0000:02:00.7: irq 69 for MSI/MSI-X
alloc irq_desc for 70 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
be2net 0000:02:00.7: irq 70 for MSI/MSI-X
be2net 0000:02:00.7: No support for multiple RX queues
be2net 0000:02:00.7: Can create only 1 RX queues
be2net 0000:02:00.7: Emulex OneConnect 10Gbps NIC(be3) port 1
sd 0:0:0:1: [sda] 1172058032 512-byte logical blocks: (600 GB/558 GiB)
sd 0:0:0:1: [sda] Write Protect is off
sd 0:0:0:1: [sda] Mode Sense: 6b 00 00 08
sd 0:0:0:1: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:1: [sda] Attached SCSI disk
dracut: Scanning devices sda2 for LVM logical volumes vg00/lvol2 vg00/lvol1
dracut: inactive '/dev/vg00/lvol1' [1000.00 MiB] inherit
dracut: inactive '/dev/vg00/lvol2' [3.91 GiB] inherit
dracut: inactive '/dev/vg00/lvol3' [10.74 GiB] inherit
dracut: inactive '/dev/vg00/lvol4' [3.91 GiB] inherit
dracut: inactive '/dev/vg00/lvol5' [3.91 GiB] inherit
dracut: inactive '/dev/vg00/lvol6' [3.91 GiB] inherit
dracut: inactive '/dev/vg00/lvol7' [3.91 GiB] inherit
dracut: inactive '/dev/vg00/lvol8' [3.91 GiB] inherit
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-0): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/mapper/vg00-lvol1
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1350571429.878:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
readahead-collector: starting
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 2.1.0 Nov 9 2011
hpwdt 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hpwdt: New timer passed in is 30 seconds.
hpwdt 0000:01:00.0: HP Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: OFF (default = 0/OFF), priority: LAST (default = 0/LAST).
hpwdt 0000:01:00.0: HP Watchdog Timer Driver: 1.3.0, timer margin: 30 seconds (nowayout=0).
hpilo 0000:01:00.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
hpilo 0000:01:00.2: setting latency timer to 64
scsi 0:0:0:0: Attached scsi generic sg0 type 12
sd 0:0:0:1: Attached scsi generic sg1 type 0
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
microcode: CPU0 sig=0x206c2, pf=0x1, revision=0x14
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU1 sig=0x206c2, pf=0x1, revision=0x14
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU2 sig=0x206c2, pf=0x1, revision=0x14
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU3 sig=0x206c2, pf=0x1, revision=0x14
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU4 sig=0x206c2, pf=0x1, revision=0x14
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU5 sig=0x206c2, pf=0x1, revision=0x14
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU6 sig=0x206c2, pf=0x1, revision=0x14
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU7 sig=0x206c2, pf=0x1, revision=0x14
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU8 sig=0x206c2, pf=0x1, revision=0x14
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU9 sig=0x206c2, pf=0x1, revision=0x14
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU10 sig=0x206c2, pf=0x1, revision=0x14
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU11 sig=0x206c2, pf=0x1, revision=0x14
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU12 sig=0x206c2, pf=0x1, revision=0x14
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU13 sig=0x206c2, pf=0x1, revision=0x14
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU14 sig=0x206c2, pf=0x1, revision=0x14
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU15 sig=0x206c2, pf=0x1, revision=0x14
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU16 sig=0x206c2, pf=0x1, revision=0x14
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU17 sig=0x206c2, pf=0x1, revision=0x14
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU18 sig=0x206c2, pf=0x1, revision=0x14
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU19 sig=0x206c2, pf=0x1, revision=0x14
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU20 sig=0x206c2, pf=0x1, revision=0x14
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU21 sig=0x206c2, pf=0x1, revision=0x14
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU22 sig=0x206c2, pf=0x1, revision=0x14
platform microcode: firmware: requesting intel-ucode/06-2c-02
microcode: CPU23 sig=0x206c2, pf=0x1, revision=0x14
platform microcode: firmware: requesting intel-ucode/06-2c-02
Microcode Update Driver: v2.00 , Peter Oruba
power_meter ACPI000D:00: Found ACPI power meter.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
EXT3-fs (dm-0): using internal journal
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-3): using internal journal
EXT3-fs (dm-3): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-4): using internal journal
EXT3-fs (dm-4): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-2): using internal journal
EXT3-fs (dm-2): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-5): using internal journal
EXT3-fs (dm-5): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-6): using internal journal
EXT3-fs (dm-6): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-7): using internal journal
EXT3-fs (dm-7): mounted filesystem with ordered data mode
Adding 4095992k swap on /dev/mapper/vg00-lvol2. Priority:-1 extents:1 across:4095992k
readahead-disable-service: delaying service auditd
eth0: Link up
eth0: no IPv6 routers present
Slow work thread pool: Starting up
Slow work thread pool: Ready
FS-Cache: Loaded
CacheFiles: Loaded
TECH PREVIEW: fscache may not be fully supported.
Please review provided documentation for limitations.
FS-Cache: Cache "mycache" added (type cachefiles)
CacheFiles: File cache on dm-5 registered
pcc-cpufreq: (v1.00.00) driver loaded with frequency limits: 1600 MHz, 3066 MHz
eth1: Link up
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
8021q: adding VLAN 0 to HW filter on device eth0
bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.8 (Oct 02, 2011)
TECH PREVIEW: FCOE Target support may not be fully supported.
Please review provided documentation for limitations.
TARGET_CORE[0]: Loading Generic Kernel Storage Engine: v4.0.0-rc7-ml on Linux/x86_64 on 2.6.32-220.el6.x86_64
TARGET_CORE[0]: Initialized ConfigFS Fabric Infrastructure: v4.0.0-rc7-ml on Linux/x86_64 on 2.6.32-220.el6.x86_64
TCM: Registered subsystem plugin: rd_dr struct module: (null)
TCM: Registered subsystem plugin: rd_mcp struct module: (null)
CORE_HBA[0] - TCM Ramdisk HBA Driver v4.0 on Generic Target Core Stack v4.0.0-rc7-ml
CORE_HBA[0] - Attached Ramdisk HBA: 0 to Generic Target Core TCQ Depth: 256 MaxSectors: 1024
CORE_HBA[0] - Attached HBA to Generic Target Core
RAMDISK: Referencing Page Count: 8
CORE_RD[0] - Built Ramdisk Device ID: 0 space of 8 pages in 1 tables
rd_dr: Using SPC_PASSTHROUGH, no reservation emulation
rd_dr: Using SPC_ALUA_PASSTHROUGH, no ALUA emulation
Vendor: LIO-ORG Model: RAMDISK-DR Revision: 4.0
Type: Direct-Access ANSI SCSI revision: 05
CORE_RD[0] - Added TCM DIRECT Ramdisk Device ID: 0 of 8 pages in 1 tables, 32768 total bytes
TCM: Registered subsystem plugin: pscsi struct module: ffffffffa0401ee0
TCM: Registered subsystem plugin: fileio struct module: ffffffffa04067c0
TCM: Registered subsystem plugin: iblock struct module: ffffffffa040a880
8021q: adding VLAN 0 to HW filter on device eth1
ADDRCONF(NETDEV_UP): eth2: link is not ready
8021q: adding VLAN 0 to HW filter on device eth2
ADDRCONF(NETDEV_UP): eth3: link is not ready
8021q: adding VLAN 0 to HW filter on device eth3
ADDRCONF(NETDEV_UP): eth4: link is not ready
8021q: adding VLAN 0 to HW filter on device eth4
ADDRCONF(NETDEV_UP): eth5: link is not ready
8021q: adding VLAN 0 to HW filter on device eth5
ADDRCONF(NETDEV_UP): eth6: link is not ready
8021q: adding VLAN 0 to HW filter on device eth6
ADDRCONF(NETDEV_UP): eth7: link is not ready
8021q: adding VLAN 0 to HW filter on device eth7
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Bridge firewalling registered
device virbr0-nic entered promiscuous mode
New device virbr0-nic does not support netpoll
Disabling netpoll for virbr0
virbr0: starting userspace STP failed, starting kernel STP
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Ebtables v2.0 registered
ip6_tables: (C) 2000-2006 Netfilter Core Team
lo: Disabled Privacy Extensions
libfcoe_device_notification: NETDEV_UNREGISTER lo
eth1: no IPv6 routers present
eth0: no IPv6 routers present
type=1305 audit(1350571539.012:98329): auid=4294967295 ses=4294967295 op="remove rule" key=(null) list=4 res=1
type=1305 audit(1350571539.012:98330): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1
readahead-collector: starting delayed service auditd
readahead-collector: sorting
readahead-collector: finished
fuse init (API version 7.13)
eth1: Link up
NOHZ: local_softirq_pending 100
ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff8817edbf8420), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-341)
ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff8817edbf8420), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-341)
ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff8817edbf8420), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-341)
ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff8817edbf8420), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-341)
ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff8817edbf8420), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-341)
ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff8817edbf8420), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-341)
ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff8817edbf8420), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-341)
ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff8817edbf8420), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-341)
ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff8817edbf8420), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-341)
ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff8817edbf8420), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-341)
ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff8817edbf8420), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-341)
ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMM] (Node ffff8817edbf8420), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20090903/power_meter-341)