dmesg - miniwal
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007fedffff] usable
BIOS-e820: [mem 0x000000007fee0000-0x000000007fee2fff] ACPI NVS
BIOS-e820: [mem 0x000000007fee3000-0x000000007feeffff] ACPI data
BIOS-e820: [mem 0x000000007fef0000-0x000000007fefffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: Gigabyte Technology Co., Ltd. G31M-ES2C/G31M-ES2C, BIOS FF 10/12/2009
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x7fee0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07FF00000 mask FFFF00000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2047MB, range: 1MB, type UC
total RAM covered: 2047M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2047MB, range: 1MB, type UC
found SMP MP-table at [mem 0x000f53c0-0x000f53cf] mapped at [ffff8800000f53c0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x7fedffff]
[mem 0x00000000-0x7fdfffff] page 2M
[mem 0x7fe00000-0x7fedffff] page 4k
kernel direct mapping tables up to 0x7fedffff @ [mem 0x1fffc000-0x1fffffff]
RAMDISK: [mem 0x35666000-0x36b2afff]
ACPI: RSDP 00000000000f6db0 00014 (v00 GBT )
ACPI: RSDT 000000007fee3040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 000000007fee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 000000007fee3180 040E8 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 000000007fee0000 00040
ACPI: HPET 000000007fee73c0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 000000007fee7440 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: TAMG 000000007fee7480 0625A (v01 GBT GBT B0 5455312E BG?? 00020101)
ACPI: APIC 000000007fee72c0 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 000000007feedd40 003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007fedffff]
Initmem setup node 0 [mem 0x00000000-0x7fedffff]
NODE_DATA [mem 0x7fedc000-0x7fedffff]
[ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0x7fedffff]
On node 0 totalpages: 523887
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3913 pages, LIFO batch:0
DMA32 zone: 8124 pages used for memmap
DMA32 zone: 511780 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
e820: [mem 0x7ff00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s83584 r8192 d22912 u524288
pcpu-alloc: s83584 r8192 d22912 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 515693
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2025216k/2096000k available (6711k kernel code, 452k absent, 70332k reserved, 6459k data, 928k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:712 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 8388608 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2133.327 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4266.65 BogoMIPS (lpj=8533308)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 25118 entries in 99 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping 06
Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1
Brought up 2 CPUs
Total of 2 processors activated (8533.30 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x7fee0000-0x7fee2fff] (12288 bytes)
dummy:
RTC time: 14:56:42, date: 10/22/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI Warning: Incorrect checksum in table [TAMG] - 0x4F, should be 0x4E (20120320/tbutils-323)
ACPI: SSDT 000000007feed720 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
ACPI: SSDT 000000007feedbe0 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: >host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: >host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: >host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: >host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: >host bridge window [mem 0x7ff00000-0xfebfffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: >root bus resource [mem 0x7ff00000-0xfebfffff]
pci 0000:00:00.0: >[8086:29c0] type 00 class 0x060000
pci 0000:00:01.0: >[8086:29c1] type 01 class 0x060400
pci 0000:00:01.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: >[8086:27d8] type 00 class 0x040300
pci 0000:00:1b.0: >reg 10: [mem 0xfdff8000-0xfdffbfff 64bit]
pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: >[8086:27d0] type 01 class 0x060400
pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: >[8086:27d2] type 01 class 0x060400
pci 0000:00:1c.1: >PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: >[8086:27c8] type 00 class 0x0c0300
pci 0000:00:1d.0: >reg 20: [io 0xff00-0xff1f]
pci 0000:00:1d.1: >[8086:27c9] type 00 class 0x0c0300
pci 0000:00:1d.1: >reg 20: [io 0xfe00-0xfe1f]
pci 0000:00:1d.2: >[8086:27ca] type 00 class 0x0c0300
pci 0000:00:1d.2: >reg 20: [io 0xfd00-0xfd1f]
pci 0000:00:1d.3: >[8086:27cb] type 00 class 0x0c0300
pci 0000:00:1d.3: >reg 20: [io 0xfc00-0xfc1f]
pci 0000:00:1d.7: >[8086:27cc] type 00 class 0x0c0320
pci 0000:00:1d.7: >reg 10: [mem 0xfdfff000-0xfdfff3ff]
pci 0000:00:1e.0: >[8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: >[8086:27b8] type 00 class 0x060100
pci 0000:00:1f.0: >ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
pci 0000:00:1f.0: >ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
pci 0000:00:1f.2: >[8086:27c0] type 00 class 0x010180
pci 0000:00:1f.2: >reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.2: >reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.2: >reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.2: >reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.2: >reg 20: [io 0xf900-0xf90f]
pci 0000:00:1f.2: >PME# supported from D3hot
pci 0000:00:1f.3: >[8086:27da] type 00 class 0x0c0500
pci 0000:00:1f.3: >reg 20: [io 0x0500-0x051f]
pci 0000:01:00.0: >[1002:6779] type 00 class 0x030000
pci 0000:01:00.0: >reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: >reg 18: [mem 0xfdcc0000-0xfdcdffff 64bit]
pci 0000:01:00.0: >reg 20: [io 0xae00-0xaeff]
pci 0000:01:00.0: >reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: >supports D1 D2
pci 0000:01:00.1: >[1002:aa98] type 00 class 0x040300
pci 0000:01:00.1: >reg 10: [mem 0xfdcfc000-0xfdcfffff 64bit]
pci 0000:01:00.1: >supports D1 D2
pci 0000:00:01.0: >PCI bridge to [bus 01-01]
pci 0000:00:01.0: > bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: > bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:01.0: > bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
pci 0000:00:1c.0: > bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: > bridge window [mem 0xfd900000-0xfd9fffff]
pci 0000:00:1c.0: > bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
pci 0000:03:00.0: >[1969:1062] type 00 class 0x020000
pci 0000:03:00.0: >reg 10: [mem 0xfdec0000-0xfdefffff 64bit]
pci 0000:03:00.0: >reg 18: [io 0xbf00-0xbf7f]
pci 0000:03:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.1: >PCI bridge to [bus 03-03]
pci 0000:00:1c.1: > bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: > bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:1c.1: > bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
pci 0000:00:1e.0: >PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:1e.0: > bridge window [io 0xd000-0xdfff]
pci 0000:00:1e.0: > bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:1e.0: > bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
pci 0000:00:1e.0: > bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: > bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: > bridge window [mem 0x7ff00000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
pci0000:00: >Requesting ACPI _OSC control (0x1d)
pci0000:00: >ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0x7fee0000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: >[bus 00-ff]
pnp 00:00: >[io 0x0cf8-0x0cff]
pnp 00:00: >[io 0x0000-0x0cf7 window]
pnp 00:00: >[io 0x0d00-0xffff window]
pnp 00:00: >[mem 0x000a0000-0x000bffff window]
pnp 00:00: >[mem 0x000c0000-0x000dffff window]
pnp 00:00: >[mem 0x7ff00000-0xfebfffff window]
pnp 00:00: >Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: >[io 0x0010-0x001f]
pnp 00:01: >[io 0x0022-0x003f]
pnp 00:01: >[io 0x0044-0x005f]
pnp 00:01: >[io 0x0062-0x0063]
pnp 00:01: >[io 0x0065-0x006f]
pnp 00:01: >[io 0x0074-0x007f]
pnp 00:01: >[io 0x0091-0x0093]
pnp 00:01: >[io 0x00a2-0x00bf]
pnp 00:01: >[io 0x00e0-0x00ef]
pnp 00:01: >[io 0x04d0-0x04d1]
pnp 00:01: >[io 0x0290-0x029f]
pnp 00:01: >[io 0x0800-0x087f]
pnp 00:01: >[io 0x0290-0x0294]
pnp 00:01: >[io 0x0880-0x088f]
system 00:01: >[io 0x04d0-0x04d1] has been reserved
system 00:01: >[io 0x0290-0x029f] has been reserved
system 00:01: >[io 0x0800-0x087f] has been reserved
system 00:01: >[io 0x0290-0x0294] has been reserved
system 00:01: >[io 0x0880-0x088f] has been reserved
system 00:01: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: >[dma 4]
pnp 00:02: >[io 0x0000-0x000f]
pnp 00:02: >[io 0x0080-0x0090]
pnp 00:02: >[io 0x0094-0x009f]
pnp 00:02: >[io 0x00c0-0x00df]
pnp 00:02: >Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: >[irq 0 disabled]
pnp 00:03: >[irq 8]
pnp 00:03: >[mem 0xfed00000-0xfed003ff]
pnp 00:03: >Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: >[io 0x0070-0x0073]
pnp 00:04: >Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: >[io 0x0061]
pnp 00:05: >Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: >[io 0x00f0-0x00ff]
pnp 00:06: >[irq 13]
pnp 00:06: >Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: >[io 0x03f8-0x03ff]
pnp 00:07: >[irq 4]
pnp 00:07: >Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: >[io 0x0378-0x037f]
pnp 00:08: >[irq 7]
pnp 00:08: >Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:09: >[io 0x0400-0x04cf]
system 00:09: >[io 0x0400-0x04cf] has been reserved
system 00:09: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: >[mem 0xe0000000-0xefffffff]
system 00:0a: >[mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: >Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: >[mem 0x000f0000-0x000f3fff]
pnp 00:0b: >[mem 0x000f4000-0x000f7fff]
pnp 00:0b: >[mem 0x000f8000-0x000fbfff]
pnp 00:0b: >[mem 0x000fc000-0x000fffff]
pnp 00:0b: >[mem 0x7fee0000-0x7fefffff]
pnp 00:0b: >[mem 0x00000000-0x0009ffff]
pnp 00:0b: >[mem 0x00100000-0x7fedffff]
pnp 00:0b: >[mem 0xfec00000-0xfec00fff]
pnp 00:0b: >[mem 0xfed13000-0xfed1dfff]
pnp 00:0b: >[mem 0xfed20000-0xfed8ffff]
pnp 00:0b: >[mem 0xfee00000-0xfee00fff]
pnp 00:0b: >[mem 0xffb00000-0xffb7ffff]
pnp 00:0b: >[mem 0xfff00000-0xffffffff]
pnp 00:0b: >[mem 0x000e0000-0x000effff]
system 00:0b: >[mem 0x000f0000-0x000f3fff] could not be reserved
system 00:0b: >[mem 0x000f4000-0x000f7fff] could not be reserved
system 00:0b: >[mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0b: >[mem 0x000fc000-0x000fffff] could not be reserved
system 00:0b: >[mem 0x7fee0000-0x7fefffff] could not be reserved
system 00:0b: >[mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: >[mem 0x00100000-0x7fedffff] could not be reserved
system 00:0b: >[mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: >[mem 0xfed13000-0xfed1dfff] has been reserved
system 00:0b: >[mem 0xfed20000-0xfed8ffff] has been reserved
system 00:0b: >[mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: >[mem 0xffb00000-0xffb7ffff] has been reserved
system 00:0b: >[mem 0xfff00000-0xffffffff] has been reserved
system 00:0b: >[mem 0x000e0000-0x000effff] has been reserved
system 00:0b: >Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0c: >[mem 0xffb80000-0xffbfffff]
pnp 00:0c: >Plug and Play ACPI device, IDs INT0800 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:01:00.0: >BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref]
pci 0000:00:01.0: >PCI bridge to [bus 01-01]
pci 0000:00:01.0: > bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: > bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:01.0: > bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
pci 0000:00:1c.0: > bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: > bridge window [mem 0xfd900000-0xfd9fffff]
pci 0000:00:1c.0: > bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
pci 0000:00:1c.1: >PCI bridge to [bus 03-03]
pci 0000:00:1c.1: > bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: > bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:1c.1: > bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
pci 0000:00:1e.0: >PCI bridge to [bus 04-04]
pci 0000:00:1e.0: > bridge window [io 0xd000-0xdfff]
pci 0000:00:1e.0: > bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:1e.0: > bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
pci 0000:00:1e.0: >setting latency timer to 64
pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: >resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: >resource 8 [mem 0x7ff00000-0xfebfffff]
pci_bus 0000:01: >resource 0 [io 0xa000-0xafff]
pci_bus 0000:01: >resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:01: >resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: >resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: >resource 1 [mem 0xfd900000-0xfd9fffff]
pci_bus 0000:02: >resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
pci_bus 0000:03: >resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: >resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:03: >resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
pci_bus 0000:04: >resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: >resource 1 [mem 0xfdb00000-0xfdbfffff]
pci_bus 0000:04: >resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
pci_bus 0000:04: >resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: >resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: >resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: >resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:04: >resource 8 [mem 0x7ff00000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: >Boot video device
PCI: CLS 4 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1350917801.152:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 3955
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: >irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: >irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: >irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
Freeing initrd memory: 21268k freed
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: >version 2.13
ata_piix 0000:00:1f.2: >MAP [
IDE IDE P1 P3 ]
ata_piix 0000:00:1f.2: >setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: >setting latency timer to 64
ehci_hcd 0000:00:1d.7: >EHCI Host Controller
ehci_hcd 0000:00:1d.7: >new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: >using broken periodic workaround
ehci_hcd 0000:00:1d.7: >cache line size of 4 is not supported
ehci_hcd 0000:00:1d.7: >irq 23, io mem 0xfdfff000
ehci_hcd 0000:00:1d.7: >USB 2.0 started, EHCI 1.00
usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: >Product: EHCI Host Controller
usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
usb usb1: >SerialNumber: 0000:00:1d.7
hub 1-0:1.0: >USB hub found
hub 1-0:1.0: >8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: >setting latency timer to 64
uhci_hcd 0000:00:1d.0: >UHCI Host Controller
uhci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: >irq 23, io base 0x0000ff00
usb usb2: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: >Product: UHCI Host Controller
usb usb2: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb2: >SerialNumber: 0000:00:1d.0
hub 2-0:1.0: >USB hub found
hub 2-0:1.0: >2 ports detected
uhci_hcd 0000:00:1d.1: >setting latency timer to 64
uhci_hcd 0000:00:1d.1: >UHCI Host Controller
uhci_hcd 0000:00:1d.1: >new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: >irq 19, io base 0x0000fe00
usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: >Product: UHCI Host Controller
usb usb3: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb3: >SerialNumber: 0000:00:1d.1
hub 3-0:1.0: >USB hub found
hub 3-0:1.0: >2 ports detected
uhci_hcd 0000:00:1d.2: >setting latency timer to 64
uhci_hcd 0000:00:1d.2: >UHCI Host Controller
uhci_hcd 0000:00:1d.2: >new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: >irq 18, io base 0x0000fd00
usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: >Product: UHCI Host Controller
usb usb4: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb4: >SerialNumber: 0000:00:1d.2
hub 4-0:1.0: >USB hub found
hub 4-0:1.0: >2 ports detected
uhci_hcd 0000:00:1d.3: >setting latency timer to 64
uhci_hcd 0000:00:1d.3: >UHCI Host Controller
uhci_hcd 0000:00:1d.3: >new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: >irq 16, io base 0x0000fc00
usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: >Product: UHCI Host Controller
usb usb5: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
usb usb5: >SerialNumber: 0000:00:1d.3
hub 5-0:1.0: >USB hub found
hub 5-0:1.0: >2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: >RTC can wake from S4
rtc_cmos 00:04: >rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 0:55:941
rtc_cmos 00:04: >setting system clock to 2012-10-22 14:56:42 UTC (1350917802)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata1.00: ATAPI: TSSTcorpCD/DVDW SH-S182F, SB01, max UDMA/33
ata2.00: HPA detected: current 488395055, native 488397168
ata2.00: ATA-7: SAMSUNG SP2504C, VT100-50, max UDMA7
ata2.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/33
scsi 0:0:0:0: >CD-ROM TSSTcorp CD/DVDW SH-S182F SB01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: >Attached scsi CD-ROM sr0
sr 0:0:0:0: >Attached scsi generic sg0 type 5
ata2.00: configured for UDMA/133
scsi 1:0:0:0: >Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5
sd 1:0:0:0: >[sda] 488395055 512-byte logical blocks: (250 GB/232 GiB)
sd 1:0:0:0: >Attached scsi generic sg1 type 0
sd 1:0:0:0: >[sda] Write Protect is off
sd 1:0:0:0: >[sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
sda: p5 size 3528704 extends beyond EOD, enabling native capacity
ata2: soft resetting link
ata2.00: n_sectors mismatch 488395055 != 488397168
ata2.00: new n_sectors matches native, probably late HPA unlock, n_sectors updated
ata2.00: configured for UDMA/133
ata2: EH complete
sd 1:0:0:0: >[sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sda: detected capacity change from 250058268160 to 250059350016
usb 5-2: >new low-speed USB device number 2 using uhci_hcd
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
sd 1:0:0:0: >[sda] Attached SCSI disk
Freeing unused kernel memory: 928k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1472k freed
Freeing unused kernel memory: 1124k freed
udevd[97]: starting version 175
Refined TSC clocksource calibration: 2133.333 MHz.
Switching to clocksource tsc
atl1c 0000:03:00.0: >version 1.0.1.0-NAPI
usb 5-2: >New USB device found, idVendor=046d, idProduct=c517
usb 5-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: >Product: USB Receiver
usb 5-2: >Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input2
logitech 0003:046D:C517.0001: >input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.3-2/input0
logitech 0003:046D:C517.0002: >fixing up Logitech keyboard report descriptor
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/input/input3
logitech 0003:046D:C517.0002: >input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-2/input1
vesafb: mode is 1400x1050x32, linelength=5632, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010a00000, using 5824k, total 5824k
Console: switching to colour frame buffer device 175x65
fb0: VESA VGA frame buffer device
EXT4-fs (sda9): INFO: recovery required on readonly filesystem
EXT4-fs (sda9): write access will be enabled during recovery
EXT4-fs (sda9): recovery complete
EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
Adding 2083836k swap on /dev/sda7. Priority:-1 extents:1 across:2083836k
Adding 2081788k swap on /dev/sda8. Priority:-2 extents:1 across:2081788k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[369]: starting version 175
lp: driver loaded but no devices found
EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro
intel_rng: FWH not detected
ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \TCOI 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
leds_ss4200: no LED devices found
parport_pc 00:08: >reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
snd_hda_intel 0000:00:1b.0: >irq 43 for MSI/MSI-X
[fglrx] Maximum main memory to use for locked dma buffers: 1875 MBytes.
[fglrx] vendor: 1002 device: 6779 count: 1
[fglrx] ioport: bar 4, base 0xae00, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 9.0.2 [Sep 20 2012] with 1 minors
microcode: CPU0 sig=0x6f6, pf=0x1, revision=0xcb
lp0: using parport0 (interrupt-driven).
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: >irq 44 for MSI/MSI-X
gpio_ich: GPIO from 206 to 255 on gpio_ich
ppdev: user-space parallel port driver
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
microcode: CPU1 sig=0x6f6, pf=0x1, revision=0xcb
microcode: Microcode Update Driver: v2.00 , Peter Oruba
coretemp coretemp.0: >Using relative temperature scale!
coretemp coretemp.0: >Using relative temperature scale!
Adding 2079740k swap on /dev/mapper/cryptswap1. Priority:-3 extents:1 across:2079740k
init: failsafe main process (913) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1350928646.727:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1034 comm="apparmor_parser"
type=1400 audit(1350928646.727:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1034 comm="apparmor_parser"
type=1400 audit(1350928646.731:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1036 comm="apparmor_parser"
type=1400 audit(1350928646.735:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1036 comm="apparmor_parser"
type=1400 audit(1350928646.743:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1035 comm="apparmor_parser"
type=1400 audit(1350928646.743:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1043 comm="apparmor_parser"
type=1400 audit(1350928646.743:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1035 comm="apparmor_parser"
type=1400 audit(1350928646.743:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=1043 comm="apparmor_parser"
type=1400 audit(1350928646.747:10): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1047 comm="apparmor_parser"
type=1400 audit(1350928646.751:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1047 comm="apparmor_parser"
atl1c 0000:03:00.0: >irq 45 for MSI/MSI-X
atl1c 0000:03:00.0: >atl1c: eth0 NIC Link is Up
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=0 offMin=0x388 offMax=0x17f8
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.1.18_Ubuntu (interface 0x00190000).
vboxpci: IOMMU not found (not registered)
fglrx_pci 0000:01:00.0: >irq 46 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1243
[fglrx] Firegl kernel thread PID: 1244
[fglrx] Firegl kernel thread PID: 1245
[fglrx] IRQ 46 Enabled
[fglrx] Gart USWC size:628 M.
[fglrx] Gart cacheable size:246 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fb06000, size:1fa000
[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
show_signal_msg: 39 callbacks suppressed
evolution-calen[1789]: segfault at 7f2910001460 ip 00007f2910001460 sp 00007fff3846cef8 error 15
usb 1-4: >new high-speed USB device number 3 using ehci_hcd
usb 1-4: >New USB device found, idVendor=0781, idProduct=5530
usb 1-4: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: >Product: Cruzer
usb 1-4: >Manufacturer: SanDisk
usb 1-4: >SerialNumber: 3146901DEF103934
Initializing USB Mass Storage driver...
scsi2 : usb-storage 1-4:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver uas
scsi 2:0:0:0: >Direct-Access SanDisk Cruzer 8.02 PQ: 0 ANSI: 0 CCS
scsi 2:0:0:1: >CD-ROM SanDisk Cruzer 8.02 PQ: 0 ANSI: 0
sd 2:0:0:0: >Attached scsi generic sg2 type 0
sd 2:0:0:0: >[sdb] 15695871 512-byte logical blocks: (8.03 GB/7.48 GiB)
sd 2:0:0:0: >[sdb] Write Protect is off
sd 2:0:0:0: >[sdb] Mode Sense: 45 00 00 08
sd 2:0:0:0: >[sdb] No Caching mode page present
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sr1: scsi3-mmc drive: 48x/48x tray
sr 2:0:0:1: >Attached scsi CD-ROM sr1
sr 2:0:0:1: >Attached scsi generic sg3 type 5
sd 2:0:0:0: >[sdb] No Caching mode page present
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: >[sdb] No Caching mode page present
sd 2:0:0:0: >[sdb] Assuming drive cache: write through
sd 2:0:0:0: >[sdb] Attached SCSI removable disk
sr 2:0:0:1: >GET_EVENT and TUR disagree continuously, suppress GET_EVENT events
usb 1-4: >USB disconnect, device number 3
cdrom: issuing MRW background format suspend
usb 1-7: >new high-speed USB device number 4 using ehci_hcd
usb 1-7: >New USB device found, idVendor=0480, idProduct=a003
usb 1-7: >New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 1-7: >Product: External USB HDD
usb 1-7: >Manufacturer: Toshiba
usb 1-7: >SerialNumber: 201006070166
scsi3 : usb-storage 1-7:1.0
scsi 3:0:0:0: >Direct-Access Toshiba External USB HDD PQ: 0 ANSI: 4
sd 3:0:0:0: >Attached scsi generic sg2 type 0
sd 3:0:0:0: >[sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 3:0:0:0: >[sdb] Write Protect is off
sd 3:0:0:0: >[sdb] Mode Sense: 38 00 00 00
sd 3:0:0:0: >[sdb] No Caching mode page present
sd 3:0:0:0: >[sdb] Assuming drive cache: write through
sd 3:0:0:0: >[sdb] No Caching mode page present
sd 3:0:0:0: >[sdb] Assuming drive cache: write through
sdb: sdb1
sd 3:0:0:0: >[sdb] No Caching mode page present
sd 3:0:0:0: >[sdb] Assuming drive cache: write through
sd 3:0:0:0: >[sdb] Attached SCSI disk
usb 1-7: >USB disconnect, device number 4
usb 1-7: >new high-speed USB device number 5 using ehci_hcd
usb 1-7: >New USB device found, idVendor=0480, idProduct=a003
usb 1-7: >New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 1-7: >Product: External USB HDD
usb 1-7: >Manufacturer: Toshiba
usb 1-7: >SerialNumber: 201006070166
scsi4 : usb-storage 1-7:1.0
scsi 4:0:0:0: >Direct-Access Toshiba External USB HDD PQ: 0 ANSI: 4
sd 4:0:0:0: >Attached scsi generic sg2 type 0
sd 4:0:0:0: >[sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 4:0:0:0: >[sdb] Write Protect is off
sd 4:0:0:0: >[sdb] Mode Sense: 38 00 00 00
sd 4:0:0:0: >[sdb] No Caching mode page present
sd 4:0:0:0: >[sdb] Assuming drive cache: write through
sd 4:0:0:0: >[sdb] No Caching mode page present
sd 4:0:0:0: >[sdb] Assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: >[sdb] No Caching mode page present
sd 4:0:0:0: >[sdb] Assuming drive cache: write through
sd 4:0:0:0: >[sdb] Attached SCSI disk
usb 1-3: >new high-speed USB device number 6 using ehci_hcd
usb 1-3: >New USB device found, idVendor=0781, idProduct=5530
usb 1-3: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: >Product: Cruzer
usb 1-3: >Manufacturer: SanDisk
usb 1-3: >SerialNumber: 3146901DEF103934
scsi5 : usb-storage 1-3:1.0
scsi 5:0:0:0: >Direct-Access SanDisk Cruzer 8.02 PQ: 0 ANSI: 0 CCS
scsi 5:0:0:1: >CD-ROM SanDisk Cruzer 8.02 PQ: 0 ANSI: 0
sd 5:0:0:0: >Attached scsi generic sg3 type 0
sr1: scsi3-mmc drive: 48x/48x tray
sr 5:0:0:1: >Attached scsi CD-ROM sr1
sr 5:0:0:1: >Attached scsi generic sg4 type 5
sd 5:0:0:0: >[sdc] 15695871 512-byte logical blocks: (8.03 GB/7.48 GiB)
sd 5:0:0:0: >[sdc] Write Protect is off
sd 5:0:0:0: >[sdc] Mode Sense: 45 00 00 08
sd 5:0:0:0: >[sdc] No Caching mode page present
sd 5:0:0:0: >[sdc] Assuming drive cache: write through
sd 5:0:0:0: >[sdc] No Caching mode page present
sd 5:0:0:0: >[sdc] Assuming drive cache: write through
sdc: sdc1
sd 5:0:0:0: >[sdc] No Caching mode page present
sd 5:0:0:0: >[sdc] Assuming drive cache: write through
sd 5:0:0:0: >[sdc] Attached SCSI removable disk
sr 5:0:0:1: >GET_EVENT and TUR disagree continuously, suppress GET_EVENT events
update-notifier[3694]: segfault at 1 ip 00007f0855226d21 sp 00007fff270bd820 error 4 in libgobject-2.0.so.0.3400.0[7f0855212000+4d000]
sdc: detected capacity change from 8036285952 to 0
usb 1-3: >USB disconnect, device number 6
cdrom: issuing MRW background format suspend
usb 1-3: >new high-speed USB device number 7 using ehci_hcd
usb 1-3: >New USB device found, idVendor=054c, idProduct=0010
usb 1-3: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: >Product: Sony DSC
usb 1-3: >Manufacturer: Sony
usb-storage 1-3:1.0: >Quirks match for vid 054c pid 0010: 1
scsi6 : usb-storage 1-3:1.0
scsi 6:0:0:0: >Direct-Access Sony Sony DSC 6.00 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: >Attached scsi generic sg3 type 0
sd 6:0:0:0: >[sdc] 1953792 512-byte logical blocks: (1.00 GB/954 MiB)
sd 6:0:0:0: >[sdc] Write Protect is off
sd 6:0:0:0: >[sdc] Mode Sense: 00 00 00 00
sd 6:0:0:0: >[sdc] Asking for cache data failed
sd 6:0:0:0: >[sdc] Assuming drive cache: write through
sd 6:0:0:0: >[sdc] Asking for cache data failed
sd 6:0:0:0: >[sdc] Assuming drive cache: write through
sdc: sdc1
sd 6:0:0:0: >[sdc] Asking for cache data failed
sd 6:0:0:0: >[sdc] Assuming drive cache: write through
sd 6:0:0:0: >[sdc] Attached SCSI removable disk
type=1701 audit(1350929869.145:25): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=4472 comm="chrome" reason="seccomp" sig=0 syscall=39 compat=0 ip=0x7fa9e878fed9 code=0x50000
type=1701 audit(1350929890.237:26): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=4644 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7fa9e87866b0 code=0x50000
type=1701 audit(1350929890.237:27): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=4644 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7fa9e87866b0 code=0x50000
type=1701 audit(1350929890.281:28): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=4650 comm="chrome" reason="seccomp" sig=0 syscall=59 compat=0 ip=0x7fa9e875fc27 code=0x50000