dmesg - mem-cache1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-279.5.1.el6.x86_64 (mockbuild@c6b10.bsys.dev.centos.org) (gcc version 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) ) #1 SMP Tue Aug 14 23:54:45 UTC 2012
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000097400 (usable)
BIOS-e820: 0000000000097400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000df61f000 (usable)
BIOS-e820: 00000000df61f000 - 00000000df62c000 (ACPI data)
BIOS-e820: 00000000df62c000 - 00000000df62d000 (usable)
BIOS-e820: 00000000df62d000 - 00000000e4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000011ffff000 (usable)
DMI 2.7 present.
SMBIOS version 2.7 @ 0xF4F40
DMI: HP ProLiant DL320 G6, BIOS W07 05/05/2011
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x11ffff max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00E0000000 mask FFE0000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xdf62d max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000df62d000
0000000000 - 00c0000000 page 1G
00c0000000 - 00df600000 page 2M
00df600000 - 00df62d000 page 4k
kernel direct mapping tables up to df62d000 @ 8000-b000
init_memory_mapping: 0000000100000000-000000011ffff000
0100000000 - 011fe00000 page 2M
011fe00000 - 011ffff000 page 4k
kernel direct mapping tables up to 11ffff000 @ a000-d000
RAMDISK: 36939000 - 37fef6f8
ACPI: RSDP 00000000000f4f00 00024 (v02 HP )
ACPI: XSDT 00000000df620340 000AC (v01 HP ProLiant 00000002 Ò? 0000162E)
ACPI: FACP 00000000df620440 000F4 (v03 HP ProLiant 00000002 Ò? 0000162E)
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20090903/tbfadt-607)
ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8 (20090903/tbfadt-607)
ACPI: DSDT 00000000df620540 02229 (v01 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 00000000df61f100 00040
ACPI: SPCR 00000000df61f140 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E)
ACPI: MCFG 00000000df61f1c0 0003C (v01 HP ProLiant 00000001 00000000)
ACPI: HPET 00000000df61f200 00038 (v01 HP ProLiant 00000002 Ò? 0000162E)
ACPI: FFFF 00000000df61f240 00064 (v02 HP ProLiant 00000002 Ò? 0000162E)
ACPI: SPMI 00000000df61f2c0 00040 (v05 HP ProLiant 00000001 Ò? 0000162E)
ACPI: ERST 00000000df61f300 001D0 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: APIC 00000000df61f500 0015E (v01 HP ProLiant 00000002 00000000)
ACPI: SRAT 00000000df61f680 00570 (v01 HP Proliant 00000001 Ò? 0000162E)
ACPI: FFFF 00000000df61fc00 00176 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: BERT 00000000df61fd80 00030 (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: HEST 00000000df61fdc0 000BC (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: DMAR 00000000df61fe80 0014C (v01 HP ProLiant 00000001 Ò? 0000162E)
ACPI: SSDT 00000000df622780 00125 (v03 HP CRSPCI0 00000002 HP 00000001)
ACPI: SSDT 00000000df6228c0 003BB (v01 HP pcc 00000001 INTL 20090625)
ACPI: SSDT 00000000df622c80 00377 (v01 HP pmab 00000001 INTL 20090625)
ACPI: SSDT 00000000df623000 015C4 (v01 INTEL PPM RCM 00000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 1 -> APIC 32 -> Node 0
SRAT: PXM 1 -> APIC 33 -> Node 0
SRAT: PXM 1 -> APIC 34 -> Node 0
SRAT: PXM 1 -> APIC 35 -> Node 0
SRAT: PXM 1 -> APIC 50 -> Node 0
SRAT: PXM 1 -> APIC 51 -> Node 0
SRAT: PXM 1 -> APIC 52 -> Node 0
SRAT: PXM 1 -> APIC 53 -> Node 0
SRAT: Node 0 PXM 1 0-e0000000
SRAT: Node 0 PXM 1 100000000-120000000
NUMA: Using 32 for the hash shift.
Bootmem setup node 0 0000000000000000-000000011ffff000
NODE_DATA [000000000000c000 - 000000000003ffff]
bootmap [0000000000040000 - 0000000000063fff] pages 24
(8 early reservations) ==> bootmem [0000000000 - 011ffff000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002012024] TEXT DATA BSS ==> [0001000000 - 0002012024]
#3 [0036939000 - 0037fef6f8] RAMDISK ==> [0036939000 - 0037fef6f8]
#4 [0000097400 - 0000100000] BIOS reserved ==> [0000097400 - 0000100000]
#5 [0002013000 - 0002013188] BRK ==> [0002013000 - 0002013188]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 000000c000] PGTABLE ==> [000000a000 - 000000c000]
found SMP MP-table at [ffff8800000f4f80] f4f80
Reserving 129MB of memory at 48MB for crashkernel (System RAM: 4607MB)
[ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0011ffff
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000001 -> 0x00000097
0: 0x00000100 -> 0x000df61f
0: 0x000df62c -> 0x000df62d
0: 0x00100000 -> 0x0011ffff
On node 0 totalpages: 1045941
DMA zone: 56 pages used for memmap
DMA zone: 111 pages reserved
DMA zone: 3823 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 896600 pages, LIFO batch:31
Normal zone: 1792 pages used for memmap
Normal zone: 129279 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x30] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x24] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x14] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x34] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x12] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x32] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x26] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x16] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x36] disabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x31] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x35] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x33] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x27] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x37] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x00] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 0, version 32, address 0xfec80000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 32 CPUs, 24 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 0000000000097000 - 0000000000098000
PM: Registered nosave memory: 0000000000098000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000df61f000 - 00000000df62c000
PM: Registered nosave memory: 00000000df62d000 - 00000000e4000000
PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fee10000
PM: Registered nosave memory: 00000000fee10000 - 00000000ff800000
PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
Allocating PCI resources starting at e4000000 (gap: e4000000:1ac00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88002c000000 s94424 r8192 d24360 u131072
pcpu-alloc: s94424 r8192 d24360 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029702
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 3882000k/4718588k available (5152k kernel code, 534824k absent, 301764k reserved, 7166k data, 1260k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1072
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2400.271 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.54 BogoMIPS (lpj=2400271)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21015 entries in 83 pages
DMAR: Host address width 39
DMAR: DRHD base: 0x000000e7ffe000 flags: 0x1
IOMMU e7ffe000: ver 1:0 cap c90780106f0462 ecap f0207e
DMAR: RMRR base: 0x000000df7fb000 end: 0x000000df7fdfff
DMAR: RMRR base: 0x000000df7f4000 end: 0x000000df7f9fff
DMAR: ATSR flags: 0x0
IOAPIC id 8 under DRHD base 0xe7ffe000
IOAPIC id 0 under DRHD base 0xe7ffe000
Enabled IRQ remapping in xapic mode
Setting APIC routing to physical flat
alloc irq_desc for 48 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
Performance Events: PEBS fmt1+, Westmere events, Broken BIOS detected, complain to your hardware vendor.
[Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7
Brought up 8 CPUs
Total of 8 processors activated (38404.33 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - e3ffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-0f])
pci_root PNP0A03:00: host bridge window [mem 0xe7000000-0xfbffffff]
pci_root PNP0A03:00: host bridge window [io 0x1000-0x4fff]
pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0x0fff]
pci_root PNP0A03:00: host bridge window [mem 0xfed00000-0xfed03fff]
pci_root PNP0A03:00: host bridge window [mem 0xfed00000-0xfed44fff]
pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03bb]
pci_root PNP0A03:00: host bridge window [io 0x03c0-0x03df]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window expanded to [mem 0xfed00000-0xfed44fff]; [mem 0xfed00000-0xfed44fff] ignored
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0x1000-0x101f]
pci 0000:00:1a.1: reg 20: [io 0x1020-0x103f]
pci 0000:00:1a.2: reg 20: [io 0x1040-0x105f]
pci 0000:00:1a.7: reg 10: [mem 0xf79f0000-0xf79f03ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x1060-0x107f]
pci 0000:00:1d.1: reg 20: [io 0x1080-0x109f]
pci 0000:00:1d.2: reg 20: [io 0x10a0-0x10bf]
pci 0000:00:1d.7: reg 10: [mem 0xf79e0000-0xf79e03ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x0900-0x097f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0300 (mask 001f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0600 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0800 (mask 007f)
pci 0000:00:1f.2: reg 10: [io 0x10c0-0x10c7]
pci 0000:00:1f.2: reg 14: [io 0x10c8-0x10cb]
pci 0000:00:1f.2: reg 18: [io 0x10d0-0x10d7]
pci 0000:00:1f.2: reg 1c: [io 0x10d8-0x10db]
pci 0000:00:1f.2: reg 20: [io 0x10e0-0x10ef]
pci 0000:00:1f.2: reg 24: [io 0x10f0-0x10ff]
pci 0000:00:1f.5: reg 10: [io 0x1400-0x1407]
pci 0000:00:1f.5: reg 14: [io 0x1408-0x140b]
pci 0000:00:1f.5: reg 18: [io 0x1410-0x1417]
pci 0000:00:1f.5: reg 1c: [io 0x1418-0x141b]
pci 0000:00:1f.5: reg 20: [io 0x1420-0x142f]
pci 0000:00:1f.5: reg 24: [io 0x1430-0x143f]
pci 0000:0d:00.0: reg 10: [mem 0xfa000000-0xfbffffff 64bit]
pci 0000:0d:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0d:00.0: PME# disabled
pci 0000:0d:00.1: reg 10: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:0d:00.1: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:0d:00.1: PME# supported from D0 D3hot D3cold
pci 0000:0d:00.1: PME# disabled
pci 0000:00:01.0: PCI bridge to [bus 0d-0f]
pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:03.0: PCI bridge to [bus 07-09]
pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0a:00.0: reg 10: [mem 0xf7e00000-0xf7ffffff 64bit]
pci 0000:0a:00.0: reg 18: [mem 0xf7df0000-0xf7df0fff 64bit]
pci 0000:0a:00.0: reg 20: [io 0x4000-0x40ff]
pci 0000:0a:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:0a:00.0: PME# supported from D0
pci 0000:0a:00.0: PME# disabled
pci 0000:00:07.0: PCI bridge to [bus 0a-0c]
pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:07.0: bridge window [mem 0xf7d00000-0xf7ffffff]
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:04.0: reg 10: [mem 0xf7cf0000-0xf7cfffff 64bit]
pci 0000:03:04.0: reg 18: [mem 0xf7ce0000-0xf7ceffff 64bit]
pci 0000:03:04.0: PME# supported from D3hot D3cold
pci 0000:03:04.0: PME# disabled
pci 0000:03:04.1: reg 10: [mem 0xf7cd0000-0xf7cdffff 64bit]
pci 0000:03:04.1: reg 18: [mem 0xf7cc0000-0xf7ccffff 64bit]
pci 0000:03:04.1: PME# supported from D3hot D3cold
pci 0000:03:04.1: PME# disabled
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
pci 0000:02:00.0: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:02:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.4: PCI bridge to [bus 04-06]
pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:01:03.0: reg 10: [mem 0xe8000000-0xefffffff pref]
pci 0000:01:03.0: reg 14: [io 0x3000-0x30ff]
pci 0000:01:03.0: reg 18: [mem 0xf7bf0000-0xf7bfffff]
pci 0000:01:03.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:03.0: supports D1 D2
pci 0000:01:04.0: reg 10: [io 0x2800-0x28ff]
pci 0000:01:04.0: reg 14: [mem 0xf7be0000-0xf7be01ff]
pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
pci 0000:01:04.0: PME# disabled
pci 0000:01:04.2: reg 10: [io 0x3400-0x34ff]
pci 0000:01:04.2: reg 14: [mem 0xf7bd0000-0xf7bd07ff]
pci 0000:01:04.2: reg 18: [mem 0xf7bc0000-0xf7bc3fff]
pci 0000:01:04.2: reg 1c: [mem 0xf7b00000-0xf7b7ffff]
pci 0000:01:04.2: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:04.2: PME# supported from D0 D3hot D3cold
pci 0000:01:04.2: PME# disabled
pci 0000:01:04.4: reg 20: [io 0x3800-0x381f]
pci 0000:01:04.4: PME# supported from D0 D3hot D3cold
pci 0000:01:04.4: PME# disabled
pci 0000:01:04.6: reg 10: [mem 0xf7af0000-0xf7af00ff]
pci 0000:01:04.6: PME# supported from D0 D3hot D3cold
pci 0000:01:04.6: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
pci 0000:00:1e.0: bridge window [mem 0xf7a00000-0xf7bfffff]
pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:00:1e.0: bridge window [mem 0xe7000000-0xfbffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0x4fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x0fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfed44fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03bb] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03c0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT1.NIB1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT07._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT07.PRB2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT01._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11)
vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:03.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 PNP0a08 (active)
pnp 00:01: [io 0x0070-0x0077]
pnp 00:01: [io 0x0408-0x040f]
pnp 00:01: [io 0x04d0-0x04d1]
pnp 00:01: [io 0x0020-0x003f]
pnp 00:01: [io 0x00a0-0x00bf]
pnp 00:01: [io 0x0090-0x009f]
pnp 00:01: [io 0x0050-0x0053]
pnp 00:01: [io 0x0700-0x071f]
pnp 00:01: [io 0x0880-0x08ff]
pnp 00:01: [io 0x0900-0x097f]
pnp 00:01: [io 0x0010-0x001f]
pnp 00:01: [io 0x0c80-0x0c83]
pnp 00:01: [io 0x0cd4-0x0cd7]
pnp 00:01: [io 0x0f50-0x0f58]
pnp 00:01: [io 0x00f0]
pnp 00:01: [io 0x0ca0-0x0ca1]
pnp 00:01: [io 0x0ca4-0x0ca5]
pnp 00:01: [mem 0xe0000000-0xe3ffffff]
pnp 00:01: [mem 0xfe000000-0xfebfffff]
pnp 00:01: [mem 0xe7ffe000-0xe7ffffff]
pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:01: [io 0x02f8-0x02ff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0ca2-0x0ca3]
pnp 00:02: Plug and Play ACPI device, IDs IPI0001 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [dma 7]
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0080-0x008f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x0060]
pnp 00:06: [io 0x0064]
pnp 00:06: [irq 1]
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: [irq 12]
pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:08: [io 0x002e-0x002f]
pnp 00:08: [io 0x0620-0x065f]
pnp 00:08: [io 0x0680-0x069f]
pnp 00:08: [io 0x0600-0x061f]
pnp 00:08: [io 0x0660-0x067f]
pnp 00:08: [io 0x0300-0x031f]
pnp 00:08: Plug and Play ACPI device, IDs PNP0a06 (active)
pnp 00:09: [irq 4]
pnp 00:09: [io 0x03f8-0x03ff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:0a: [io 0x0070-0x0071]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io 0x0408-0x040f] has been reserved
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0700-0x071f] has been reserved
system 00:01: [io 0x0880-0x08ff] could not be reserved
system 00:01: [io 0x0900-0x097f] has been reserved
system 00:01: [io 0x0c80-0x0c83] has been reserved
system 00:01: [io 0x0cd4-0x0cd7] has been reserved
system 00:01: [io 0x0f50-0x0f58] has been reserved
system 00:01: [io 0x0ca0-0x0ca1] has been reserved
system 00:01: [io 0x0ca4-0x0ca5] has been reserved
system 00:01: [io 0x02f8-0x02ff] has been reserved
system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xe7ffe000-0xe7ffffff] has been reserved
PCI: max bus depth: 2 pci_try_num: 3
pci 0000:00:01.0: BAR 15: assigned [mem 0xe7000000-0xe70fffff pref]
pci 0000:00:07.0: BAR 15: assigned [mem 0xe7100000-0xe71fffff pref]
pci 0000:0d:00.0: BAR 6: assigned [mem 0xe7000000-0xe701ffff pref]
pci 0000:0d:00.1: BAR 6: assigned [mem 0xe7020000-0xe703ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 0d-0f]
pci 0000:00:01.0: PCI bridge to [bus 0d-0f]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:01.0: bridge window [mem 0xe7000000-0xe70fffff pref]
pci 0000:00:03.0: PCI bridge to [bus 07-09]
pci 0000:00:03.0: PCI bridge to [bus 07-09]
pci 0000:00:03.0: bridge window [io disabled]
pci 0000:00:03.0: bridge window [mem disabled]
pci 0000:00:03.0: bridge window [mem pref disabled]
pci 0000:0a:00.0: BAR 6: assigned [mem 0xe7100000-0xe717ffff pref]
pci 0000:00:07.0: PCI bridge to [bus 0a-0c]
pci 0000:00:07.0: PCI bridge to [bus 0a-0c]
pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:07.0: bridge window [mem 0xf7d00000-0xf7ffffff]
pci 0000:00:07.0: bridge window [mem 0xe7100000-0xe71fffff pref]
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0: PCI bridge to [bus 03-03]
pci 0000:02:00.0: bridge window [io disabled]
pci 0000:02:00.0: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:02:00.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:00:1c.4: PCI bridge to [bus 04-06]
pci 0000:00:1c.4: PCI bridge to [bus 04-06]
pci 0000:00:1c.4: bridge window [io disabled]
pci 0000:00:1c.4: bridge window [mem disabled]
pci 0000:00:1c.4: bridge window [mem pref disabled]
pci 0000:01:03.0: BAR 6: assigned [mem 0xf7a00000-0xf7a1ffff pref]
pci 0000:01:04.2: BAR 6: assigned [mem 0xf7a20000-0xf7a2ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 01-01]
pci 0000:00:1e.0: PCI bridge to [bus 01-01]
pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
pci 0000:00:1e.0: bridge window [mem 0xf7a00000-0xf7bfffff]
pci 0000:00:1e.0: bridge window [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:02:00.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [mem 0xe7000000-0xfbffffff]
pci_bus 0000:00: resource 5 [io 0x1000-0x4fff]
pci_bus 0000:00: resource 6 [io 0x0000-0x03af]
pci_bus 0000:00: resource 7 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff]
pci_bus 0000:00: resource 9 [mem 0xfed00000-0xfed44fff]
pci_bus 0000:00: resource 10 [io 0x03b0-0x03bb]
pci_bus 0000:00: resource 11 [io 0x03c0-0x03df]
pci_bus 0000:00: resource 12 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0d: resource 1 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:0d: resource 2 [mem 0xe7000000-0xe70fffff pref]
pci_bus 0000:0a: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:0a: resource 1 [mem 0xf7d00000-0xf7ffffff]
pci_bus 0000:0a: resource 2 [mem 0xe7100000-0xe71fffff pref]
pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:01: resource 0 [io 0x2000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xf7a00000-0xf7bfffff]
pci_bus 0000:01: resource 2 [mem 0xe8000000-0xefffffff 64bit pref]
pci_bus 0000:01: resource 4 [mem 0xe7000000-0xfbffffff]
pci_bus 0000:01: resource 5 [io 0x1000-0x4fff]
pci_bus 0000:01: resource 6 [io 0x0000-0x03af]
pci_bus 0000:01: resource 7 [io 0x03e0-0x0cf7]
pci_bus 0000:01: resource 8 [io 0x0d00-0x0fff]
pci_bus 0000:01: resource 9 [mem 0xfed00000-0xfed44fff]
pci_bus 0000:01: resource 10 [io 0x03b0-0x03bb]
pci_bus 0000:01: resource 11 [io 0x03c0-0x03df]
pci_bus 0000:01: resource 12 [mem 0x000a0000-0x000bffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1a.0: PCI INT A disabled
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1a.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1a.1: PCI INT B disabled
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1a.2: PCI INT C disabled
pci 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1a.7: PCI INT C disabled
pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:00:1d.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.1: PCI INT B disabled
pci 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1d.7: PCI INT A disabled
pci 0000:01:03.0: Boot video device
pci 0000:01:04.4: PCI INT B -> GSI 22 (level, low) -> IRQ 22
pci 0000:01:04.4: PCI INT B disabled
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 23257k freed
DMAR: Device scope device [0000:00:0a.00] not found
DMAR: Device scope device [0000:00:0a.00] not found
DMAR: Device scope device [0000:00:09.00] not found
DMAR: Device scope device [0000:00:09.00] not found
DMAR: Device scope device [0000:00:08.00] not found
DMAR: Device scope device [0000:00:08.00] not found
DMAR: Device scope device [0000:00:06.00] not found
DMAR: Device scope device [0000:00:06.00] not found
DMAR: Device scope device [0000:00:05.00] not found
DMAR: Device scope device [0000:00:05.00] not found
DMAR: Device scope device [0000:00:04.00] not found
DMAR: Device scope device [0000:00:04.00] not found
DMAR: Device scope device [0000:00:02.00] not found
DMAR: Device scope device [0000:00:02.00] not found
audit: initializing netlink socket (disabled)
type=2000 audit(1346347201.525:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7627
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 982EF986F12EB8CB
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 49 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.0: irq 49 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 50 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.4: irq 50 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (8 C)
ERST: Failed to get Error Log Address Range.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf79f0000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-279.5.1.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf79e0000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-279.5.1.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-279.5.1.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 23, io base 0x00001020
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-279.5.1.el6.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 22, io base 0x00001040
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-279.5.1.el6.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001060
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-279.5.1.el6.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 23, io base 0x00001080
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32-279.5.1.el6.x86_64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 22, io base 0x000010a0
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.32-279.5.1.el6.x86_64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
uhci_hcd 0000:01:04.4: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:01:04.4: UHCI Host Controller
uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 9
uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:04.4: irq 22, io base 0x00003800
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: UHCI Host Controller
usb usb9: Manufacturer: Linux 2.6.32-279.5.1.el6.x86_64 uhci_hcd
usb usb9: SerialNumber: 0000:01:04.4
usb usb9: configuration #1 chosen from 1 choice
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:0a: RTC can wake from S4
rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:0a: setting system clock to 2012-08-30 17:20:03 UTC (1346347203)
Initalizing network drop monitor service
Freeing unused kernel memory: 1260k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 972k freed
Freeing unused kernel memory: 1732k freed
dracut: dracut-004-284.el6_3
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
iscsi: registered transport (cxgb3i)
Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
iscsi: registered transport (cxgb4i)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.10 (March 21, 2012)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Apr 26, 2012)
iscsi: registered transport (bnx2i)
iscsi: registered transport (be2iscsi)
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: dm-devel@redhat.com
udev: starting version 147
usb 9-1: new full speed USB device number 2 using uhci_hcd
[drm] Initialized drm 1.1.0 20060810
[drm] VGACON disable radeon kernel modesetting.
pci 0000:01:03.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] Initialized radeon 1.33.0 20080528 for 0000:01:03.0 on minor 0
dracut: Starting plymouth daemon
usb 9-1: New USB device found, idVendor=03f0, idProduct=1027
usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 9-1: Product: Virtual Keyboard
usb 9-1: Manufacturer: HP
usb 9-1: configuration #1 chosen from 1 choice
Refined TSC clocksource calibration: 2400.085 MHz.
Switching to clocksource tsc
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb9/9-1/9-1:1.0/input/input2
generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0
input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb9/9-1/9-1:1.1/input/input3
generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1
ata_piix 0000:00:1f.2: version 2.13
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x10c0 ctl 0x10c8 bmdma 0x10e0 irq 17
ata2: SATA max UDMA/133 cmd 0x10d0 ctl 0x10d8 bmdma 0x10e8 irq 17
ata_piix 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x1400 ctl 0x1408 bmdma 0x1420 irq 17
ata4: SATA max UDMA/133 cmd 0x1410 ctl 0x1418 bmdma 0x1428 irq 17
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: hp DVD RAM UJ8A2, 1.01, max UDMA/100
ata3.00: configured for UDMA/100
ata2.00: SATA link down (SStatus 0 SControl 310)
ata2.01: SATA link down (SStatus 0 SControl 310)
ata1.00: SATA link down (SStatus 0 SControl 310)
ata1.01: SATA link down (SStatus 0 SControl 310)
scsi 2:0:0:0: CD-ROM hp DVD RAM UJ8A2 1.01 PQ: 0 ANSI: 5
bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.1 (Dec 18, 2011)
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:0d:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
bnx2 0000:0d:00.0: setting latency timer to 64
bnx2 0000:0d:00.0: firmware: requesting bnx2/bnx2-mips-09-6.2.1b.fw
bnx2 0000:0d:00.0: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw
bnx2 0000:0d:00.0: eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem fa000000, IRQ 28, node addr 44:1e:a1:56:1a:04
alloc irq_desc for 40 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:0d:00.1: PCI INT B -> GSI 40 (level, low) -> IRQ 40
bnx2 0000:0d:00.1: setting latency timer to 64
bnx2 0000:0d:00.1: firmware: requesting bnx2/bnx2-mips-09-6.2.1b.fw
bnx2 0000:0d:00.1: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw
bnx2 0000:0d:00.1: eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f8000000, IRQ 40, node addr 44:1e:a1:56:1a:06
HP HPSA Driver (v 2.0.2-4)
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
hpsa 0000:0a:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
hpsa 0000:0a:00.0: MSIX
alloc irq_desc for 51 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
hpsa 0000:0a:00.0: irq 51 for MSI/MSI-X
alloc irq_desc for 52 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
hpsa 0000:0a:00.0: irq 52 for MSI/MSI-X
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
hpsa 0000:0a:00.0: irq 53 for MSI/MSI-X
alloc irq_desc for 54 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
hpsa 0000:0a:00.0: irq 54 for MSI/MSI-X
hpsa 0000:0a:00.0: hpsa0: at IRQ 51 using DAC
scsi4 : hpsa
hpsa 0000:0a:00.0: RAID device c4b3t0l0 added.
hpsa 0000:0a:00.0: Direct-Access device c4b0t0l0 added.
scsi 4:3:0:0: RAID HP P410 5.70 PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access HP LOGICAL VOLUME 5.70 PQ: 0 ANSI: 5
tg3.c:v3.122 (December 7, 2011)
tg3 0000:03:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
tg3 0000:03:04.0: eth2: Tigon3 [partno(N/A) rev 9003] (PCIX:133MHz:64-bit) MAC address 2c:76:8a:d0:ab:a8
tg3 0000:03:04.0: eth2: attached PHY is 5714 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:03:04.0: eth2: RXcsums[0] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:04.0: eth2: dma_rwctrl[76148000] dma_mask[40-bit]
tg3 0000:03:04.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
tg3 0000:03:04.1: eth3: Tigon3 [partno(N/A) rev 9003] (PCIX:133MHz:64-bit) MAC address 2c:76:8a:d0:ab:a9
tg3 0000:03:04.1: eth3: attached PHY is 5714 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:03:04.1: eth3: RXcsums[0] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:03:04.1: eth3: dma_rwctrl[76148000] dma_mask[40-bit]
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sd 4:0:0:0: [sda] 1171743836 512-byte logical blocks: (599 GB/558 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 6b 00 00 08
sd 4:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 4:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda2): INFO: recovery required on readonly filesystem
EXT4-fs (sda2): write access will be enabled during recovery
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/sda2
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1346347205.461:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 2.1.0 Aug 14 2012
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
sr 2:0:0:0: Attached scsi generic sg0 type 5
scsi 4:3:0:0: Attached scsi generic sg1 type 12
sd 4:0:0:0: Attached scsi generic sg2 type 0
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
hpwdt 0000:01:04.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
hpwdt: New timer passed in is 30 seconds.
hpwdt 0000:01:04.0: HP Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: OFF (default = 0/OFF), priority: LAST (default = 0/LAST).
hpwdt 0000:01:04.0: HP Watchdog Timer Driver: 1.3.0, timer margin: 30 seconds (nowayout=0).
hpilo 0000:01:04.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si 0000:01:04.6: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ipmi_si: Adding PCI-specified kcs state machine
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Adding ACPI-specified kcs state machine: duplicate interface
ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf7af0000, slave address 0x0, irq 21
IRQ 21/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs
Using irq 21
ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x11)
IPMI kcs interface initialized
power_meter ACPI000D:00: Found ACPI power meter.
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts:
Adding 2097144k swap on /dev/sda3. Priority:-1 extents:1 across:2097144k
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)
Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-bond0 instead
bonding: bond0: Setting MII monitoring interval to 100.
bonding: bond0: setting mode to active-backup (1).
ADDRCONF(NETDEV_UP): bond0: link is not ready
8021q: adding VLAN 0 to HW filter on device bond0
bonding: bond0: Adding slave eth2.
alloc irq_desc for 55 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:03:04.0: irq 55 for MSI/MSI-X
bonding: bond0: enslaving eth2 as a backup interface with a down link.
bonding: bond0: Adding slave eth3.
alloc irq_desc for 56 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
tg3 0000:03:04.1: irq 56 for MSI/MSI-X
bonding: bond0: enslaving eth3 as a backup interface with a down link.
tg3 0000:03:04.0: eth2: Link is up at 1000 Mbps, full duplex
tg3 0000:03:04.0: eth2: Flow control is off for TX and off for RX
bond0: link status definitely up for interface eth2, 1000 Mbps full duplex.
bonding: bond0: making interface eth2 the new active one.
bonding: bond0: first active interface up!
ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
tg3 0000:03:04.1: eth3: Link is up at 1000 Mbps, full duplex
tg3 0000:03:04.1: eth3: Flow control is off for TX and off for RX
bond0: link status definitely up for interface eth3, 1000 Mbps full duplex.
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
bond0: no IPv6 routers present