dmesg - Rebell_V1
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-31-generic (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #50-Ubuntu SMP Fri Sep 7 16:16:45 UTC 2012 (Ubuntu 3.2.0-31.50-generic 3.2.28)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
[ 0.000000] BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff90000 (usable)
[ 0.000000] BIOS-e820: 00000000cff90000 - 00000000cffa8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffa8000 - 00000000cffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer System Product Name/M4A88TD-V EVO/USB3, BIOS 2201 05/11/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000230000000 aka 8960M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff90000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff90000 page 4k
[ 0.000000] kernel direct mapping tables up to cff90000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ cff8e000-cff90000
[ 0.000000] RAMDISK: 364d8000 - 37264000
[ 0.000000] ACPI: RSDP 00000000000fbb90 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cff90100 0005C (v01 051112 XSDT1120 20120511 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff90290 000F4 (v03 051112 FACP1120 20120511 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cff90450 0E65B (v01 A1638 A1638001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cffa8000 00040
[ 0.000000] ACPI: APIC 00000000cff90390 0007C (v01 051112 APIC1120 20120511 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff90410 0003C (v01 051112 OEMMCFG 20120511 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cffa8040 00072 (v01 051112 OEMB1120 20120511 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000cff9f8a0 00108 (v01 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000cff9f9b0 00038 (v01 051112 OEMHPET 20120511 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cff9f9f0 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-d0000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-230000000
[ 0.000000] NUMA: Node 0 [0,a0000) + [100000,d0000000) -> [0,d0000000)
[ 0.000000] NUMA: Node 0 [0,d0000000) + [100000000,230000000) -> [0,230000000)
[ 0.000000] Initmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [000000022fffb000 - 000000022fffffff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009a
[ 0.000000] 0: 0x00000100 -> 0x000cff90
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2096922
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3909 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 831440 pages, LIFO batch:31
[ 0.000000] Normal zone: 19456 pages used for memmap
[ 0.000000] Normal zone: 1225728 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
[ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff90000 - 00000000cffa8000
[ 0.000000] PM: Registered nosave memory: 00000000cffa8000 - 00000000cffd0000
[ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000ffa00000
[ 0.000000] PM: Registered nosave memory: 00000000ffa00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2fa00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s83136 r8192 d23360 u262144
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2061077
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 285a000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 8094656k/9175040k available (6558k kernel code, 787352k absent, 293032k reserved, 6642k data, 920k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:728 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3013.461 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6026.92 BogoMIPS (lpj=12053844)
[ 0.004006] pid_max: default: 32768 minimum: 301
[ 0.004023] Security Framework initialized
[ 0.004033] AppArmor: AppArmor initialized
[ 0.004034] Yama: becoming mindful.
[ 0.004453] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.006376] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.007252] Mount-cache hash table entries: 256
[ 0.007343] Initializing cgroup subsys cpuacct
[ 0.007348] Initializing cgroup subsys memory
[ 0.007354] Initializing cgroup subsys devices
[ 0.007356] Initializing cgroup subsys freezer
[ 0.007357] Initializing cgroup subsys blkio
[ 0.007362] Initializing cgroup subsys perf_event
[ 0.007383] tseg: 0000000000
[ 0.007393] CPU: Physical Processor ID: 0
[ 0.007394] CPU: Processor Core ID: 0
[ 0.007395] mce: CPU supports 6 MCE banks
[ 0.007403] using AMD E400 aware idle routine
[ 0.009044] ACPI: Core revision 20110623
[ 0.016008] ftrace: allocating 27008 entries in 106 pages
[ 0.024324] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064015] CPU0: AMD Phenom(tm) II X6 1075T Processor stepping 00
[ 0.068003] Performance Events: AMD PMU driver.
[ 0.068003] ... version: 0
[ 0.068003] ... bit width: 48
[ 0.068003] ... generic registers: 4
[ 0.068003] ... value mask: 0000ffffffffffff
[ 0.068003] ... max period: 00007fffffffffff
[ 0.068003] ... fixed-purpose events: 0
[ 0.068003] ... event mask: 000000000000000f
[ 0.068003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.068003] Booting Node 0, Processors #1
[ 0.068003] smpboot cpu 1: start_ip = 95000
[ 0.156024] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.156038] System has AMD C1E enabled
[ 0.156039] Switch to broadcast mode on CPU1
[ 0.156079] #2
[ 0.156080] smpboot cpu 2: start_ip = 95000
[ 0.248036] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.248050] Switch to broadcast mode on CPU2
[ 0.248086] #3
[ 0.248087] smpboot cpu 3: start_ip = 95000
[ 0.340062] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.340076] Switch to broadcast mode on CPU3
[ 0.340115] #4
[ 0.340116] smpboot cpu 4: start_ip = 95000
[ 0.432072] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.432086] Switch to broadcast mode on CPU4
[ 0.432131] #5 Ok.
[ 0.432132] smpboot cpu 5: start_ip = 95000
[ 0.524081] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.524098] Brought up 6 CPUs
[ 0.524100] Total of 6 processors activated (36161.64 BogoMIPS).
[ 0.524096] Switch to broadcast mode on CPU5
[ 0.528151] Switch to broadcast mode on CPU0
[ 0.528188] devtmpfs: initialized
[ 0.528928] EVM: security.selinux
[ 0.528929] EVM: security.SMACK64
[ 0.528930] EVM: security.capability
[ 0.529031] PM: Registering ACPI NVS region at cffa8000 (163840 bytes)
[ 0.532445] print_constraints: dummy:
[ 0.532464] RTC time: 22:18:21, date: 09/16/12
[ 0.532489] NET: Registered protocol family 16
[ 0.532593] node 0 link 0: io port [1000, ffffff]
[ 0.532596] TOM: 00000000d0000000 aka 3328M
[ 0.532598] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.532600] node 0 link 0: mmio [a0000, bffff]
[ 0.532603] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.532605] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.532607] node 0 link 0: mmio [f0000000, ffdfffff]
[ 0.532608] TOM2: 0000000230000000 aka 8960M
[ 0.532610] bus: [00, 07] on node 0 link 0
[ 0.532612] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.532613] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.532615] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
[ 0.532616] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[ 0.532618] bus: 00 index 4 [mem 0x230000000-0xfcffffffff]
[ 0.532625] Extended Config Space enabled on 1 nodes
[ 0.532654] ACPI: bus type pci registered
[ 0.532498] Trying to unpack rootfs image as initramfs...
[ 0.532699] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.532702] PCI: not using MMCONFIG
[ 0.532703] PCI: Using configuration type 1 for base access
[ 0.532704] PCI: Using configuration type 1 for extended access
[ 0.533401] bio: create slab at 0
[ 0.533401] ACPI: Added _OSI(Module Device)
[ 0.533401] ACPI: Added _OSI(Processor Device)
[ 0.533401] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.533401] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.533401] ACPI: EC: Look up EC in DSDT
[ 0.533962] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.729977] Freeing initrd memory: 13872k freed
[ 0.748461] ACPI: Interpreter enabled
[ 0.748466] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.748484] ACPI: Using IOAPIC for interrupt routing
[ 0.748505] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.749481] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.767922] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.768005] ACPI: No dock devices found.
[ 0.768006] HEST: Table not found.
[ 0.768009] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.768172] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.768302] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.768304] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.768306] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.768308] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.768310] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
[ 0.768312] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.768324] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
[ 0.768368] pci 0000:00:02.0: [1022:9603] type 1 class 0x000604
[ 0.768398] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.768401] pci 0000:00:02.0: PME# disabled
[ 0.768422] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
[ 0.768448] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.768450] pci 0000:00:0a.0: PME# disabled
[ 0.768471] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.768485] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
[ 0.768492] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
[ 0.768499] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
[ 0.768506] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
[ 0.768513] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
[ 0.768520] pci 0000:00:11.0: reg 24: [mem 0xfbfffc00-0xfbffffff]
[ 0.768563] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.768572] pci 0000:00:12.0: reg 10: [mem 0xfbffe000-0xfbffefff]
[ 0.768624] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.768637] pci 0000:00:12.2: reg 10: [mem 0xfbfff800-0xfbfff8ff]
[ 0.768696] pci 0000:00:12.2: supports D1 D2
[ 0.768697] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.768700] pci 0000:00:12.2: PME# disabled
[ 0.768715] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.768725] pci 0000:00:13.0: reg 10: [mem 0xfbffd000-0xfbffdfff]
[ 0.768777] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.768790] pci 0000:00:13.2: reg 10: [mem 0xfbfff400-0xfbfff4ff]
[ 0.768849] pci 0000:00:13.2: supports D1 D2
[ 0.768851] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.768854] pci 0000:00:13.2: PME# disabled
[ 0.768869] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.768921] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.768930] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.768937] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.768944] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.768951] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.768958] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.768986] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.769001] pci 0000:00:14.2: reg 10: [mem 0xfbff4000-0xfbff7fff 64bit]
[ 0.769048] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.769051] pci 0000:00:14.2: PME# disabled
[ 0.769060] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.769115] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.769145] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.769155] pci 0000:00:14.5: reg 10: [mem 0xfbffc000-0xfbffcfff]
[ 0.769206] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[ 0.769258] pci 0000:00:15.0: supports D1 D2
[ 0.769277] pci 0000:00:15.1: [1002:43a1] type 1 class 0x000604
[ 0.769329] pci 0000:00:15.1: supports D1 D2
[ 0.769348] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 0.769358] pci 0000:00:16.0: reg 10: [mem 0xfbff3000-0xfbff3fff]
[ 0.769409] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 0.769422] pci 0000:00:16.2: reg 10: [mem 0xfbfff000-0xfbfff0ff]
[ 0.769481] pci 0000:00:16.2: supports D1 D2
[ 0.769483] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.769486] pci 0000:00:16.2: PME# disabled
[ 0.769499] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.769512] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.769522] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.769531] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.769544] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.769585] pci 0000:01:00.0: [10de:0dc4] type 0 class 0x000300
[ 0.769594] pci 0000:01:00.0: reg 10: [mem 0xfc000000-0xfcffffff]
[ 0.769604] pci 0000:01:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.769613] pci 0000:01:00.0: reg 1c: [mem 0xd4000000-0xd5ffffff 64bit pref]
[ 0.769619] pci 0000:01:00.0: reg 24: [io 0xdc00-0xdc7f]
[ 0.769626] pci 0000:01:00.0: reg 30: [mem 0xfea80000-0xfeafffff pref]
[ 0.769676] pci 0000:01:00.1: [10de:0be9] type 0 class 0x000403
[ 0.769684] pci 0000:01:00.1: reg 10: [mem 0xfea7c000-0xfea7ffff]
[ 0.776071] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.776075] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.776078] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfeafffff]
[ 0.776081] pci 0000:00:02.0: bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
[ 0.776116] pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03
[ 0.776131] pci 0000:02:00.0: reg 10: [mem 0xfebfa000-0xfebfbfff 64bit]
[ 0.776199] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.776203] pci 0000:02:00.0: PME# disabled
[ 0.784068] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.784073] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.784123] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.784130] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.784132] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.784134] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.784136] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.784138] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.784139] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.784175] pci 0000:00:15.0: PCI bridge to [bus 04-04]
[ 0.784232] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
[ 0.784248] pci 0000:05:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.784273] pci 0000:05:00.0: reg 18: [mem 0xfafff000-0xfaffffff 64bit pref]
[ 0.784290] pci 0000:05:00.0: reg 20: [mem 0xfaff8000-0xfaffbfff 64bit pref]
[ 0.784359] pci 0000:05:00.0: supports D1 D2
[ 0.784361] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.784365] pci 0000:05:00.0: PME# disabled
[ 0.792072] pci 0000:00:15.1: PCI bridge to [bus 05-05]
[ 0.792077] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.792083] pci 0000:00:15.1: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 0.792100] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.792234] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.792260] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.792284] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.792334] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT]
[ 0.792423] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.792520] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.795550] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 14 15)
[ 0.795590] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 14 15)
[ 0.795628] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 14 15)
[ 0.795666] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 9 10 *11 14 15)
[ 0.795696] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.795718] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.795741] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.795763] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
[ 0.795838] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.795838] vgaarb: loaded
[ 0.795838] vgaarb: bridge control possible 0000:01:00.0
[ 0.795838] i2c-core: driver [aat2870] using legacy suspend method
[ 0.795838] i2c-core: driver [aat2870] using legacy resume method
[ 0.795838] SCSI subsystem initialized
[ 0.796080] libata version 3.00 loaded.
[ 0.796097] usbcore: registered new interface driver usbfs
[ 0.796104] usbcore: registered new interface driver hub
[ 0.796117] usbcore: registered new device driver usb
[ 0.796117] PCI: Using ACPI for IRQ routing
[ 0.802324] PCI: pci_cache_line_size set to 64 bytes
[ 0.802380] reserve RAM buffer: 000000000009ac00 - 000000000009ffff
[ 0.802382] reserve RAM buffer: 00000000cff90000 - 00000000cfffffff
[ 0.802446] NetLabel: Initializing
[ 0.802447] NetLabel: domain hash size = 128
[ 0.802448] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.802456] NetLabel: unlabeled traffic allowed by default
[ 0.802489] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.802489] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.804070] Switching to clocksource hpet
[ 0.808399] AppArmor: AppArmor Filesystem Enabled
[ 0.808414] pnp: PnP ACPI init
[ 0.808424] ACPI: bus type pnp registered
[ 0.808496] pnp 00:00: [bus 00-ff]
[ 0.808497] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.808499] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.808500] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.808502] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.808503] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.808505] pnp 00:00: [mem 0xd0000000-0xdfffffff window]
[ 0.808506] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.808537] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.808589] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.808591] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.808623] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.808665] pnp 00:02: [dma 4]
[ 0.808666] pnp 00:02: [io 0x0000-0x000f]
[ 0.808668] pnp 00:02: [io 0x0081-0x0083]
[ 0.808669] pnp 00:02: [io 0x0087]
[ 0.808670] pnp 00:02: [io 0x0089-0x008b]
[ 0.808671] pnp 00:02: [io 0x008f]
[ 0.808673] pnp 00:02: [io 0x00c0-0x00df]
[ 0.808692] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.808699] pnp 00:03: [io 0x0070-0x0071]
[ 0.808706] pnp 00:03: [irq 8]
[ 0.808723] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.808727] pnp 00:04: [io 0x0061]
[ 0.808744] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.808750] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.808753] pnp 00:05: [irq 13]
[ 0.808771] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.808799] pnp 00:06: [mem 0xfed00000-0xfed003ff]
[ 0.808817] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.809120] pnp 00:07: [io 0x03f8-0x03ff]
[ 0.809123] pnp 00:07: [irq 4]
[ 0.809124] pnp 00:07: [dma 0 disabled]
[ 0.809180] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.809222] pnp 00:08: [io 0x0060]
[ 0.809223] pnp 00:08: [io 0x0064]
[ 0.809225] pnp 00:08: [mem 0xfec00000-0xfec00fff]
[ 0.809226] pnp 00:08: [mem 0xfee00000-0xfee00fff]
[ 0.809256] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.809258] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.809260] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.809346] pnp 00:09: [io 0x0010-0x001f]
[ 0.809347] pnp 00:09: [io 0x0022-0x003f]
[ 0.809348] pnp 00:09: [io 0x0062-0x0063]
[ 0.809349] pnp 00:09: [io 0x0065-0x006f]
[ 0.809351] pnp 00:09: [io 0x0072-0x007f]
[ 0.809353] pnp 00:09: [io 0x0080]
[ 0.809354] pnp 00:09: [io 0x0084-0x0086]
[ 0.809356] pnp 00:09: [io 0x0088]
[ 0.809357] pnp 00:09: [io 0x008c-0x008e]
[ 0.809358] pnp 00:09: [io 0x0090-0x009f]
[ 0.809359] pnp 00:09: [io 0x00a2-0x00bf]
[ 0.809360] pnp 00:09: [io 0x00b1]
[ 0.809361] pnp 00:09: [io 0x00e0-0x00ef]
[ 0.809363] pnp 00:09: [io 0x04d0-0x04d1]
[ 0.809364] pnp 00:09: [io 0x040b]
[ 0.809365] pnp 00:09: [io 0x04d6]
[ 0.809366] pnp 00:09: [io 0x0c00-0x0c01]
[ 0.809367] pnp 00:09: [io 0x0c14]
[ 0.809368] pnp 00:09: [io 0x0c50-0x0c51]
[ 0.809369] pnp 00:09: [io 0x0c52]
[ 0.809370] pnp 00:09: [io 0x0c6c]
[ 0.809371] pnp 00:09: [io 0x0c6f]
[ 0.809373] pnp 00:09: [io 0x0cd0-0x0cd1]
[ 0.809374] pnp 00:09: [io 0x0cd2-0x0cd3]
[ 0.809375] pnp 00:09: [io 0x0cd4-0x0cd5]
[ 0.809376] pnp 00:09: [io 0x0cd6-0x0cd7]
[ 0.809377] pnp 00:09: [io 0x0cd8-0x0cdf]
[ 0.809379] pnp 00:09: [io 0x0b00-0x0b3f]
[ 0.809380] pnp 00:09: [io 0x0800-0x089f]
[ 0.809381] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.809383] pnp 00:09: [io 0x0b00-0x0b1f]
[ 0.809384] pnp 00:09: [io 0x0b20-0x0b3f]
[ 0.809385] pnp 00:09: [io 0x0900-0x090f]
[ 0.809386] pnp 00:09: [io 0x0910-0x091f]
[ 0.809387] pnp 00:09: [io 0xfe00-0xfefe]
[ 0.809389] pnp 00:09: [io 0x0060]
[ 0.809390] pnp 00:09: [io 0x0064]
[ 0.809391] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.809393] pnp 00:09: [mem 0xffb80000-0xffbfffff]
[ 0.809394] pnp 00:09: [mem 0xfec10000-0xfec1001f]
[ 0.809395] pnp 00:09: [mem 0xfed80000-0xfed80fff]
[ 0.809397] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.809452] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.809454] system 00:09: [io 0x040b] has been reserved
[ 0.809456] system 00:09: [io 0x04d6] has been reserved
[ 0.809457] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 0.809459] system 00:09: [io 0x0c14] has been reserved
[ 0.809461] system 00:09: [io 0x0c50-0x0c51] has been reserved
[ 0.809462] system 00:09: [io 0x0c52] has been reserved
[ 0.809464] system 00:09: [io 0x0c6c] has been reserved
[ 0.809465] system 00:09: [io 0x0c6f] has been reserved
[ 0.809467] system 00:09: [io 0x0cd0-0x0cd1] has been reserved
[ 0.809469] system 00:09: [io 0x0cd2-0x0cd3] has been reserved
[ 0.809470] system 00:09: [io 0x0cd4-0x0cd5] has been reserved
[ 0.809472] system 00:09: [io 0x0cd6-0x0cd7] has been reserved
[ 0.809474] system 00:09: [io 0x0cd8-0x0cdf] has been reserved
[ 0.809475] system 00:09: [io 0x0b00-0x0b3f] has been reserved
[ 0.809477] system 00:09: [io 0x0800-0x089f] has been reserved
[ 0.809479] system 00:09: [io 0x0b00-0x0b1f] has been reserved
[ 0.809481] system 00:09: [io 0x0b20-0x0b3f] has been reserved
[ 0.809482] system 00:09: [io 0x0900-0x090f] has been reserved
[ 0.809484] system 00:09: [io 0x0910-0x091f] has been reserved
[ 0.809486] system 00:09: [io 0xfe00-0xfefe] has been reserved
[ 0.809488] system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.809490] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.809492] system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.809494] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.809584] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
[ 0.809585] pnp 00:0a: [io 0x0230-0x023f]
[ 0.809586] pnp 00:0a: [io 0x0290-0x029f]
[ 0.809588] pnp 00:0a: [io 0x0300-0x030f]
[ 0.809590] pnp 00:0a: [io 0x0a30-0x0a3f]
[ 0.809620] system 00:0a: [io 0x0230-0x023f] has been reserved
[ 0.809622] system 00:0a: [io 0x0290-0x029f] has been reserved
[ 0.809623] system 00:0a: [io 0x0300-0x030f] has been reserved
[ 0.809625] system 00:0a: [io 0x0a30-0x0a3f] has been reserved
[ 0.809627] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.809647] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.809674] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.809676] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.809733] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.809735] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[ 0.809736] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.809737] pnp 00:0c: [mem 0x00100000-0xcfffffff]
[ 0.809739] pnp 00:0c: [mem 0xfec00000-0xffffffff]
[ 0.809769] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.809771] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.809773] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.809775] system 00:0c: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.809777] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.809779] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.809835] pnp: PnP ACPI: found 13 devices
[ 0.809836] ACPI: ACPI bus type pnp unregistered
[ 0.816148] PCI: max bus depth: 1 pci_try_num: 2
[ 0.816169] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.816171] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.816173] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfeafffff]
[ 0.816176] pci 0000:00:02.0: bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
[ 0.816178] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.816180] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.816184] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.816192] pci 0000:00:15.0: PCI bridge to [bus 04-04]
[ 0.816198] pci 0000:00:15.1: PCI bridge to [bus 05-05]
[ 0.816200] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.816205] pci 0000:00:15.1: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 0.816217] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.816220] pci 0000:00:02.0: setting latency timer to 64
[ 0.816224] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.816226] pci 0000:00:0a.0: setting latency timer to 64
[ 0.816236] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.816239] pci 0000:00:15.0: setting latency timer to 64
[ 0.816243] pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.816246] pci 0000:00:15.1: setting latency timer to 64
[ 0.816248] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.816250] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.816251] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.816253] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.816254] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.816256] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.816257] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.816259] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfeafffff]
[ 0.816261] pci_bus 0000:01: resource 2 [mem 0xd4000000-0xdfffffff 64bit pref]
[ 0.816262] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.816264] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.816266] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.816267] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.816269] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.816271] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.816272] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.816274] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.816276] pci_bus 0000:05: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 0.816302] NET: Registered protocol family 2
[ 0.816430] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.817288] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.819076] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.819296] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.819298] TCP reno registered
[ 0.819307] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.819346] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.819441] NET: Registered protocol family 1
[ 0.819465] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.700087] pci 0000:00:12.0: PCI INT A disabled
[ 1.700105] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.700153] pci 0000:00:12.2: PCI INT B disabled
[ 1.700159] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.780085] pci 0000:00:13.0: PCI INT A disabled
[ 1.780095] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.780140] pci 0000:00:13.2: PCI INT B disabled
[ 1.780153] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.860103] pci 0000:00:14.5: PCI INT C disabled
[ 1.860115] pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.940099] pci 0000:00:16.0: PCI INT A disabled
[ 1.940109] pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.940155] pci 0000:00:16.2: PCI INT B disabled
[ 1.940174] pci 0000:01:00.0: Boot video device
[ 1.940188] pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.946867] pci 0000:02:00.0: PCI INT A disabled
[ 1.946871] PCI: CLS 64 bytes, default 64
[ 1.948220] PCI-DMA: Disabling AGP.
[ 1.948316] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 1.948317] PCI-DMA: using GART IOMMU.
[ 1.948320] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.951384] IBS: LVT offset 1 assigned
[ 1.951421] perf: AMD IBS detected (0x0000001f)
[ 1.951544] audit: initializing netlink socket (disabled)
[ 1.951557] type=2000 audit(1347833901.944:1): initialized
[ 1.966814] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.968650] VFS: Disk quotas dquot_6.5.2
[ 1.968684] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.969055] fuse init (API version 7.17)
[ 1.969112] msgmni has been set to 15965
[ 1.969453] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.969481] io scheduler noop registered
[ 1.969482] io scheduler deadline registered
[ 1.969500] io scheduler cfq registered (default)
[ 1.969619] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.969647] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.969743] pcieport 0000:00:0a.0: setting latency timer to 64
[ 1.969761] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 1.969841] pcieport 0000:00:15.0: setting latency timer to 64
[ 1.969874] pcieport 0000:00:15.0: irq 42 for MSI/MSI-X
[ 1.969953] pcieport 0000:00:15.1: setting latency timer to 64
[ 1.969986] pcieport 0000:00:15.1: irq 43 for MSI/MSI-X
[ 1.970061] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 1.970063] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.970065] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 1.970067] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 1.970077] pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt
[ 1.970079] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.970081] pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded
[ 1.970094] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 1.970097] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[ 1.970111] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
[ 1.970112] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 1.970116] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
[ 1.970127] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.970144] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.970236] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.970240] ACPI: Power Button [PWRB]
[ 1.970282] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.970284] ACPI: Power Button [PWRF]
[ 1.970327] ACPI: processor limited to max C-state 1
[ 1.972701] ERST: Table is not found!
[ 1.972702] GHES: HEST is not enabled!
[ 1.993125] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.196832] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.232306] Linux agpgart interface v0.103
[ 2.233294] brd: module loaded
[ 2.233804] loop: module loaded
[ 2.233955] ahci 0000:00:11.0: version 3.0
[ 2.233969] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.234063] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 2.234066] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.234493] scsi0 : ahci
[ 2.234552] scsi1 : ahci
[ 2.234601] scsi2 : ahci
[ 2.234648] scsi3 : ahci
[ 2.234676] ata1: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffd00 irq 19
[ 2.234678] ata2: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffd80 irq 19
[ 2.234681] ata3: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffe00 irq 19
[ 2.234683] ata4: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffe80 irq 19
[ 2.234841] pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.234864] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 2.235149] Fixed MDIO Bus: probed
[ 2.235162] tun: Universal TUN/TAP device driver, 1.6
[ 2.235164] tun: (C) 1999-2004 Max Krasnyansky
[ 2.235220] PPP generic driver version 2.4.2
[ 2.235304] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.235361] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.235373] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.235414] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.235420] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.235433] QUIRK: Enable AMD PLL fix
[ 2.235441] ehci_hcd 0000:00:12.2: debug port 1
[ 2.235456] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbfff800
[ 2.244090] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.244196] hub 1-0:1.0: USB hub found
[ 2.244212] hub 1-0:1.0: 5 ports detected
[ 2.244338] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.244349] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.244386] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.244391] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.244408] ehci_hcd 0000:00:13.2: debug port 1
[ 2.244417] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfbfff400
[ 2.256090] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.256185] hub 2-0:1.0: USB hub found
[ 2.256188] hub 2-0:1.0: 5 ports detected
[ 2.256326] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.256337] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 2.256374] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 2.256379] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.256395] ehci_hcd 0000:00:16.2: debug port 1
[ 2.256404] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfbfff000
[ 2.268090] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 2.268182] hub 3-0:1.0: USB hub found
[ 2.268185] hub 3-0:1.0: 4 ports detected
[ 2.268278] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.268339] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.268351] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.268386] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 2.268405] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfbffe000
[ 2.328150] hub 4-0:1.0: USB hub found
[ 2.328155] hub 4-0:1.0: 5 ports detected
[ 2.328280] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.328292] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.328332] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 2.328344] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbffd000
[ 2.388153] hub 5-0:1.0: USB hub found
[ 2.388157] hub 5-0:1.0: 5 ports detected
[ 2.388284] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.388296] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 2.388331] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 2.388343] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbffc000
[ 2.448184] hub 6-0:1.0: USB hub found
[ 2.448189] hub 6-0:1.0: 2 ports detected
[ 2.448312] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.448324] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 2.448358] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 2.448372] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfbff3000
[ 2.508172] hub 7-0:1.0: USB hub found
[ 2.508180] hub 7-0:1.0: 4 ports detected
[ 2.508245] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.508332] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.508345] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 2.508348] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.508390] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[ 2.508497] xhci_hcd 0000:02:00.0: irq 18, io mem 0xfebfa000
[ 2.508532] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
[ 2.508537] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
[ 2.508541] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
[ 2.508545] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
[ 2.508547] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
[ 2.508551] xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X
[ 2.508553] xhci_hcd 0000:02:00.0: irq 50 for MSI/MSI-X
[ 2.508683] xHCI xhci_add_endpoint called for root hub
[ 2.508684] xHCI xhci_check_bandwidth called for root hub
[ 2.508700] hub 8-0:1.0: USB hub found
[ 2.508704] hub 8-0:1.0: 2 ports detected
[ 2.508737] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.508763] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[ 2.511931] xHCI xhci_add_endpoint called for root hub
[ 2.511932] xHCI xhci_check_bandwidth called for root hub
[ 2.511945] hub 9-0:1.0: USB hub found
[ 2.511953] hub 9-0:1.0: 2 ports detected
[ 2.552127] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.552154] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.552171] usbcore: registered new interface driver libusual
[ 2.552198] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.552528] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.552536] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.552668] mousedev: PS/2 mouse device common for all mice
[ 2.552778] rtc_cmos 00:03: RTC can wake from S4
[ 2.552849] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.552869] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.552923] device-mapper: uevent: version 1.0.3
[ 2.552976] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 2.552982] cpuidle: using governor ladder
[ 2.552983] cpuidle: using governor menu
[ 2.552984] EFI Variables Facility v0.08 2004-May-17
[ 2.553119] TCP cubic registered
[ 2.553177] NET: Registered protocol family 10
[ 2.553470] NET: Registered protocol family 17
[ 2.553473] Registering the dns_resolver key type
[ 2.553579] PM: Hibernation image not present or could not be loaded.
[ 2.553586] registered taskstats version 1
[ 2.558910] Magic number: 12:825:350
[ 2.559024] rtc_cmos 00:03: setting system clock to 2012-09-16 22:18:23 UTC (1347833903)
[ 2.559045] powernow-k8: Found 1 AMD Phenom(tm) II X6 1075T Processor (6 cpu cores) (version 2.20.00)
[ 2.559058] powernow-k8: Core Performance Boosting: on.
[ 2.559087] powernow-k8: 0 : pstate 0 (3000 MHz)
[ 2.559088] powernow-k8: 1 : pstate 1 (2300 MHz)
[ 2.559089] powernow-k8: 2 : pstate 2 (1600 MHz)
[ 2.559091] powernow-k8: 3 : pstate 3 (800 MHz)
[ 2.559695] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.559697] EDD information not available.
[ 2.676089] usb 1-4: new high-speed USB device number 3 using ehci_hcd
[ 2.724130] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.724151] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.724394] ata1.00: ATA-7: INTEL SSDSA2M120G2GC, 2CV102M3, max UDMA/133
[ 2.724397] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.724663] ata1.00: configured for UDMA/133
[ 2.724819] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M120 2CV1 PQ: 0 ANSI: 5
[ 2.724940] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.724953] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.724992] sd 0:0:0:0: [sda] Write Protect is off
[ 2.724995] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.725008] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.725376] sda: sda1 sda2
[ 2.725600] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.729838] ata3.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
[ 2.729840] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.735593] ata3.00: configured for UDMA/133
[ 2.735709] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
[ 2.735807] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.735820] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.735833] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.735835] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.735846] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.797782] sdb: sdb2 sdb3 < sdb5 sdb6 sdb7 >
[ 2.798123] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.799162] Freeing unused kernel memory: 920k freed
[ 2.799340] Write protecting the kernel read-only data: 12288k
[ 2.803088] Freeing unused kernel memory: 1616k freed
[ 2.806232] Freeing unused kernel memory: 1200k freed
[ 2.819838] udevd[154]: starting version 175
[ 2.842941] scsi4 : pata_atiixp
[ 2.843003] scsi5 : pata_atiixp
[ 2.843086] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 2.843088] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 2.843909] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.843930] r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.843958] r8169 0000:05:00.0: setting latency timer to 64
[ 2.844027] r8169 0000:05:00.0: irq 51 for MSI/MSI-X
[ 2.844340] r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xffffc9001178c000, 20:cf:30:f1:1d:8f, XID 0c200000 IRQ 51
[ 2.844342] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.948112] Refined TSC clocksource calibration: 3013.473 MHz.
[ 2.948117] Switching to clocksource tsc
[ 3.024078] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 3.040345] ata5.01: ATAPI: HL-DT-ST BDDVDRW CH10LS20, 1.01, max UDMA/133
[ 3.040349] ata5.01: limited to UDMA/33 due to 40-wire cable
[ 3.056449] ata5.01: configured for UDMA/33
[ 3.071094] scsi 4:0:1:0: CD-ROM HL-DT-ST BDDVDRW CH10LS20 1.01 PQ: 0 ANSI: 5
[ 3.085885] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.085888] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.085999] sr 4:0:1:0: Attached scsi CD-ROM sr0
[ 3.086074] sr 4:0:1:0: Attached scsi generic sg2 type 5
[ 3.157341] hub 2-1:1.0: USB hub found
[ 3.157441] hub 2-1:1.0: 4 ports detected
[ 3.268071] usb 2-2: new high-speed USB device number 3 using ehci_hcd
[ 3.384058] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
[ 3.512060] usb 2-4: new high-speed USB device number 4 using ehci_hcd
[ 3.916079] usb 4-3: new full-speed USB device number 2 using ohci_hcd
[ 4.256779] Initializing USB Mass Storage driver...
[ 4.256886] scsi6 : usb-storage 2-4:1.0
[ 4.256935] usbcore: registered new interface driver usb-storage
[ 4.256936] USB Mass Storage support registered.
[ 4.348075] usb 4-5: new low-speed USB device number 3 using ohci_hcd
[ 4.592794] usb 2-1.3: new low-speed USB device number 5 using ehci_hcd
[ 4.764895] usb 2-1.4: new full-speed USB device number 6 using ehci_hcd
[ 5.257309] scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
[ 5.258056] scsi 6:0:0:1: Direct-Access Generic STORAGE DEVICE 9744 PQ: 0 ANSI: 0
[ 5.258430] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 5.258530] sd 6:0:0:1: Attached scsi generic sg4 type 0
[ 5.261578] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 5.262181] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[ 7.476415] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.564402] udevd[549]: starting version 175
[ 7.642574] Adding 7811068k swap on /dev/sdb5. Priority:-1 extents:1 across:7811068k
[ 7.825042] lp: driver loaded but no devices found
[ 8.647448] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SMRG [io 0xb00-0xb2f]
[ 8.647450] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.654218] wmi: Mapper loaded
[ 8.694159] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 8.694215] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[ 8.727635] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.763174] MCE: In-kernel MCE decoding enabled.
[ 8.815331] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/input/input2
[ 8.815417] generic-usb 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:12.0-5/input0
[ 8.818314] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1.3/2-1.3:1.0/input/input3
[ 8.818415] generic-usb 0003:046D:C00C.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.2-1.3/input0
[ 8.818428] usbcore: registered new interface driver usbhid
[ 8.818429] usbhid: USB HID core driver
[ 8.840620] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 8.840714] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 8.840764] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 8.840834] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 8.841038] input: HDA ATI SB Line-Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 8.841133] input: HDA ATI SB Line-Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 8.841192] input: HDA ATI SB Line-Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 8.841251] input: HDA ATI SB Line-Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 8.841658] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8.841660] hda_intel: Disabling MSI
[ 8.841689] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 8.863349] type=1400 audit(1347826709.797:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=729 comm="apparmor_parser"
[ 8.863673] type=1400 audit(1347826709.797:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=729 comm="apparmor_parser"
[ 8.863844] type=1400 audit(1347826709.797:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=729 comm="apparmor_parser"
[ 8.876368] type=1400 audit(1347826709.813:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=759 comm="apparmor_parser"
[ 8.876712] type=1400 audit(1347826709.813:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=759 comm="apparmor_parser"
[ 8.876888] type=1400 audit(1347826709.813:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=759 comm="apparmor_parser"
[ 8.930115] type=1400 audit(1347826709.865:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=754 comm="apparmor_parser"
[ 8.930127] type=1400 audit(1347826709.865:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=760 comm="apparmor_parser"
[ 9.083703] EDAC MC: Ver: 2.1.0
[ 9.088383] AMD64 EDAC driver v3.4.0
[ 9.088527] EDAC amd64: DRAM ECC disabled.
[ 9.088542] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 9.088543] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 9.088544] (Note that use of the override may cause unknown side effects.)
[ 9.384740] usbcore: registered new interface driver usbserial
[ 9.384753] USB Serial support registered for generic
[ 9.384800] usbcore: registered new interface driver usbserial_generic
[ 9.408235] USB Serial support registered for pl2303
[ 9.408253] pl2303 4-3:1.0: pl2303 converter detected
[ 9.429256] usb 4-3: pl2303 converter now attached to ttyUSB0
[ 9.429272] usbcore: registered new interface driver pl2303
[ 9.429274] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 9.631705] it913x: Chip Version=01 Chip Type=9135
[ 9.633205] it913x: Dual mode=0 Remote=5 Tuner Type=46
[ 9.634367] dvb-usb: found a 'ITE 9135 Generic' in cold state, will try to load a firmware
[ 9.779767] IR NEC protocol handler initialized
[ 9.796101] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 9.820104] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 9.844095] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 9.868090] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 9.868161] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
[ 9.868235] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
[ 9.868287] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[ 9.868345] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[ 10.012783] IR RC5(x) protocol handler initialized
[ 10.171742] dvb-usb: downloading firmware from file 'dvb-usb-it9137-01.fw'
[ 10.172145] it913x: FRM Starting Firmware Download
[ 10.217255] nvidia: module license 'NVIDIA' taints kernel.
[ 10.217257] Disabling lock debugging due to kernel taint
[ 10.260234] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.260242] nvidia 0000:01:00.0: setting latency timer to 64
[ 10.260246] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 10.260287] IR RC6 protocol handler initialized
[ 10.260401] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.40 Thu Apr 5 21:37:00 PDT 2012
[ 10.303492] IR JVC protocol handler initialized
[ 10.308174] IR Sony protocol handler initialized
[ 10.372727] IR MCE Keyboard/mouse protocol handler initialized
[ 10.401365] lirc_dev: IR Remote Control driver registered, major 250
[ 10.410596] IR LIRC bridge handler initialized
[ 10.476078] it913x: FRM Firmware Download Completed - Resetting Device
[ 10.476470] it913x: Chip Version=01 Chip Type=9135
[ 10.476879] it913x: Firmware Version 204147968
[ 10.513590] dvb-usb: found a 'ITE 9135 Generic' in warm state.
[ 10.513649] dvb-usb: will use the device's hardware PID filter (table count: 31).
[ 10.513978] DVB: registering new adapter (ITE 9135 Generic)
[ 10.758470] DVB: registering adapter 0 frontend 0 (ITE 9135 Generic_1)...
[ 10.828060] Registered IR keymap rc-kworld-315u
[ 10.828132] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:13.2/usb2/2-2/rc/rc0/input16
[ 10.828179] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:13.2/usb2/2-2/rc/rc0
[ 10.828181] dvb-usb: schedule remote query interval to 250 msecs.
[ 10.828184] dvb-usb: ITE 9135 Generic successfully initialized and connected.
[ 10.828185] it913x: DEV registering device driver
[ 10.828207] usbcore: registered new interface driver it913x
[ 10.893047] usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1086
[ 10.893063] usbcore: registered new interface driver usblp
[ 11.821716] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 11.821719] vesafb: scrolling: redraw
[ 11.821721] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 11.828601] vesafb: framebuffer at 0xd5000000, mapped to 0xffffc90011b00000, using 5120k, total 5120k
[ 11.828767] Console: switching to colour frame buffer device 160x64
[ 11.828788] fb0: VESA VGA frame buffer device
[ 12.920853] EXT4-fs (sdb6): re-mounted. Opts: errors=remount-ro
[ 13.091756] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null)
[ 15.264974] init: failsafe main process (1009) killed by TERM signal
[ 17.578248] type=1400 audit(1347826718.513:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1091 comm="apparmor_parser"
[ 17.578586] type=1400 audit(1347826718.513:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1091 comm="apparmor_parser"
[ 17.578762] type=1400 audit(1347826718.513:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1091 comm="apparmor_parser"
[ 17.650163] type=1400 audit(1347826718.585:13): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1089 comm="apparmor_parser"
[ 17.651810] type=1400 audit(1347826718.585:14): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=1099 comm="apparmor_parser"
[ 17.667237] type=1400 audit(1347826718.601:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1090 comm="apparmor_parser"
[ 17.732942] type=1400 audit(1347826718.669:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1094 comm="apparmor_parser"
[ 17.733344] type=1400 audit(1347826718.669:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1094 comm="apparmor_parser"
[ 17.762866] type=1400 audit(1347826718.697:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1095 comm="apparmor_parser"
[ 17.763269] type=1400 audit(1347826718.697:19): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1095 comm="apparmor_parser"
[ 17.887342] ppdev: user-space parallel port driver
[ 18.056872] Bluetooth: Core ver 2.16
[ 18.056890] NET: Registered protocol family 31
[ 18.056891] Bluetooth: HCI device and connection manager initialized
[ 18.056894] Bluetooth: HCI socket layer initialized
[ 18.056895] Bluetooth: L2CAP socket layer initialized
[ 18.056900] Bluetooth: SCO socket layer initialized
[ 18.112633] Bluetooth: RFCOMM TTY layer initialized
[ 18.112637] Bluetooth: RFCOMM socket layer initialized
[ 18.112638] Bluetooth: RFCOMM ver 1.11
[ 18.220204] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.220206] Bluetooth: BNEP filters: protocol multicast
[ 19.331601] r8169 0000:05:00.0: eth0: link down
[ 19.331616] r8169 0000:05:00.0: eth0: link down
[ 19.332408] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.332637] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.080412] init: gdm main process (1207) killed by TERM signal
[ 22.031515] r8169 0000:05:00.0: eth0: link up
[ 22.032290] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 32.568022] eth0: no IPv6 routers present
[ 37.852438] init: plymouth-stop pre-start process (2391) terminated with status 1