dmesg - t60cpu
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-220.el6.x86_64 (mockbuild@x86-004.build.bos.redhat.com) (gcc version 4.4.5 20110214 (Red Hat 4.4.5-6) (GCC) ) #1 SMP Wed Nov 9 08:03:13 EST 2011
Command line: ro root=/dev/mapper/VolGroup-LogVol00 rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD quiet SYSFONT=latarcyrheb-sun16 rhgb crashkernel=auto KEYBOARDTYPE=pc KEYTABLE=us rd_LVM_LV=VolGroup/LogVol00 rd_NO_DM
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
BIOS-e820: 0000000000100000 - 00000000bd2f0000 (usable)
BIOS-e820: 00000000bd2f0000 - 00000000bd31c000 (reserved)
BIOS-e820: 00000000bd31c000 - 00000000bd35b000 (ACPI data)
BIOS-e820: 00000000bd35b000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000002040000000 (usable)
DMI 2.7 present.
SMBIOS version 2.7 @ 0xFD050
DMI: Dell Inc. PowerEdge T620/0KPG32, BIOS 1.2.6 05/10/2012
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x2040000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CBFFF write-protect
CC000-D3FFF write-back
D4000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FFF80000000 write-back
1 base 000080000000 mask 3FFFC0000000 write-back
2 base 000100000000 mask 3FFF00000000 write-back
3 base 000200000000 mask 3FFE00000000 write-back
4 base 000400000000 mask 3FFC00000000 write-back
5 base 000800000000 mask 3FF800000000 write-back
6 base 001000000000 mask 3FF000000000 write-back
7 base 002000000000 mask 3FFFC0000000 write-back
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbd2f0 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000bd2f0000
0000000000 - 0080000000 page 1G
0080000000 - 00bd200000 page 2M
00bd200000 - 00bd2f0000 page 4k
kernel direct mapping tables up to bd2f0000 @ 8000-b000
init_memory_mapping: 0000000100000000-0000002040000000
0100000000 - 2040000000 page 1G
kernel direct mapping tables up to 2040000000 @ a000-b000
RAMDISK: 3711e000 - 37fef7e7
ACPI: RSDP 00000000000f1090 00024 (v02 DELL )
ACPI: XSDT 00000000000f1194 0009C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 00000000bd34115c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 00000000bd31c000 0723C (v01 DELL PE_SC3 00000001 INTL 20110211)
ACPI: FACS 00000000bd343000 00040
ACPI: APIC 00000000bd340478 0016A (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 00000000bd3405e4 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 00000000bd340638 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DMAR 00000000bd340674 00138 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 00000000bd340990 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WD__ 00000000bd3409d0 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 00000000bd340b08 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 00000000bd3233fc 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 00000000bd32366c 0059C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 00000000bd32323c 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 00000000bd32326c 00190 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 00000000bd3410f4 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SRAT 00000000bd340d30 003C0 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SSDT 00000000bd344000 0A194 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 1 -> APIC 0 -> Node 0
SRAT: PXM 2 -> APIC 32 -> Node 1
SRAT: PXM 1 -> APIC 2 -> Node 0
SRAT: PXM 2 -> APIC 34 -> Node 1
SRAT: PXM 1 -> APIC 4 -> Node 0
SRAT: PXM 2 -> APIC 36 -> Node 1
SRAT: PXM 1 -> APIC 6 -> Node 0
SRAT: PXM 2 -> APIC 38 -> Node 1
SRAT: PXM 1 -> APIC 8 -> Node 0
SRAT: PXM 2 -> APIC 40 -> Node 1
SRAT: PXM 1 -> APIC 10 -> Node 0
SRAT: PXM 2 -> APIC 42 -> Node 1
SRAT: PXM 1 -> APIC 12 -> Node 0
SRAT: PXM 2 -> APIC 44 -> Node 1
SRAT: PXM 1 -> APIC 14 -> Node 0
SRAT: PXM 2 -> APIC 46 -> Node 1
SRAT: PXM 1 -> APIC 1 -> Node 0
SRAT: PXM 2 -> APIC 33 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 0
SRAT: PXM 2 -> APIC 35 -> Node 1
SRAT: PXM 1 -> APIC 5 -> Node 0
SRAT: PXM 2 -> APIC 37 -> Node 1
SRAT: PXM 1 -> APIC 7 -> Node 0
SRAT: PXM 2 -> APIC 39 -> Node 1
SRAT: PXM 1 -> APIC 9 -> Node 0
SRAT: PXM 2 -> APIC 41 -> Node 1
SRAT: PXM 1 -> APIC 11 -> Node 0
SRAT: PXM 2 -> APIC 43 -> Node 1
SRAT: PXM 1 -> APIC 13 -> Node 0
SRAT: PXM 2 -> APIC 45 -> Node 1
SRAT: PXM 1 -> APIC 15 -> Node 0
SRAT: PXM 2 -> APIC 47 -> Node 1
SRAT: Node 0 PXM 1 0-1040000000
SRAT: Node 1 PXM 2 1040000000-2040000000
NUMA: Allocated memnodemap from a000 - a140
NUMA: Using 30 for the hash shift.
Bootmem setup node 0 0000000000000000-0000001040000000
NODE_DATA [000000000000a140 - 000000000003e13f]
bootmap [0000000000100000 - 0000000000307fff] pages 208
(8 early reservations) ==> bootmem [0000000000 - 1040000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000200c7e4] TEXT DATA BSS ==> [0001000000 - 000200c7e4]
#3 [003711e000 - 0037fef7e7] RAMDISK ==> [003711e000 - 0037fef7e7]
#4 [000009cc00 - 0000100000] BIOS reserved ==> [000009cc00 - 0000100000]
#5 [000200d000 - 000200d38d] BRK ==> [000200d000 - 000200d38d]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 000000a140] MEMNODEMAP ==> [000000a000 - 000000a140]
Bootmem setup node 1 0000001040000000-0000002040000000
NODE_DATA [0000001040000040 - 000000104003403f]
bootmap [0000001040035000 - 0000001040234fff] pages 200
(8 early reservations) ==> bootmem [1040000000 - 2040000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 000200c7e4] TEXT DATA BSS
#3 [003711e000 - 0037fef7e7] RAMDISK
#4 [000009cc00 - 0000100000] BIOS reserved
#5 [000200d000 - 000200d38d] BRK
#6 [0000008000 - 000000a000] PGTABLE
#7 [000000a000 - 000000a140] MEMNODEMAP
found SMP MP-table at [ffff8800000fe710] fe710
Reserving 137MB of memory at 48MB for crashkernel (System RAM: 132096MB)
[ffffea0000000000-ffffea000f7fffff] PMD -> [ffff880028600000-ffff880036ffffff] on node 0
[ffffea000f800000-ffffea0038dfffff] PMD -> [ffff880038000000-ffff8800615fffff] on node 0
[ffffea0038e00000-ffffea003fffffff] PMD -> [ffff881040400000-ffff8810475fffff] on node 1
[ffffea0040000000-ffffea0070dfffff] PMD -> [ffff881047800000-ffff8810785fffff] on node 1
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x02040000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000001 -> 0x0000009c
0: 0x00000100 -> 0x000bd2f0
0: 0x00100000 -> 0x01040000
1: 0x01040000 -> 0x02040000
On node 0 totalpages: 16765579
DMA zone: 56 pages used for memmap
DMA zone: 104 pages reserved
DMA zone: 3835 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 756520 pages, LIFO batch:31
Normal zone: 218624 pages used for memmap
Normal zone: 15772160 pages, LIFO batch:31
On node 1 totalpages: 16777216
Normal zone: 229376 pages used for memmap
Normal zone: 16547840 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x26] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x28] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2a] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2c] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2e] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x27] enabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x29] enabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x2b] enabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x0d] enabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x2d] enabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x0f] enabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x2f] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xfec3f000] gsi_base[32])
IOAPIC[1]: apic_id 1, version 32, address 0xfec3f000, GSI 32-55
ACPI: IOAPIC (id[0x02] address[0xfec7f000] gsi_base[64])
IOAPIC[2]: apic_id 2, version 32, address 0xfec7f000, GSI 64-87
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 32 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 88
PM: Registered nosave memory: 000000000009c000 - 0000000000100000
PM: Registered nosave memory: 00000000bd2f0000 - 00000000bd31c000
PM: Registered nosave memory: 00000000bd31c000 - 00000000bd35b000
PM: Registered nosave memory: 00000000bd35b000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:2
PERCPU: Embedded 30 pages/cpu @ffff880028200000 s92696 r8192 d21992 u131072
pcpu-alloc: s92696 r8192 d21992 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 02 04 06 08 10 12 14 16 18 20 22 24 26 28 30
pcpu-alloc: [1] 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 33080355
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/VolGroup-LogVol00 rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD quiet SYSFONT=latarcyrheb-sun16 rhgb crashkernel=137M@0M KEYBOARDTYPE=pc KEYTABLE=us rd_LVM_LV=VolGroup/LogVol00 rd_NO_DM
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Queued invalidation will be enabled to support x2apic and Intr-remapping.
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 132093468k/135266304k available (5084k kernel code, 1095124k absent, 2077712k reserved, 7229k data, 1244k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1752
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 1073741824 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
alloc irq_desc for 88 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 89 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 90 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 91 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 92 on node 0
alloc kstat_irqs on node 0
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 2600.250 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.50 BogoMIPS (lpj=2600250)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 20 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20776 entries in 82 pages
DMAR: Host address width 46
DMAR: DRHD base: 0x000000d4800000 flags: 0x0
IOMMU d4800000: ver 1:0 cap d2078c106f0462 ecap f020fe
DMAR: DRHD base: 0x000000df900000 flags: 0x1
IOMMU df900000: ver 1:0 cap d2078c106f0462 ecap f020fe
DMAR: RMRR base: 0x000000bf458000 end: 0x000000bf46ffff
DMAR: RMRR base: 0x000000bf450000 end: 0x000000bf450fff
DMAR: RMRR base: 0x000000bf452000 end: 0x000000bf452fff
DMAR: ATSR flags: 0x0
IOAPIC id 2 under DRHD base 0xd4800000
IOAPIC id 0 under DRHD base 0xdf900000
IOAPIC id 1 under DRHD base 0xdf900000
HPET id 0 under DRHD base 0xdf900000
------------[ cut here ]------------
WARNING: at drivers/pci/intr_remapping.c:715 enable_intr_remapping+0x73/0x2af() (Not tainted)
Hardware name: PowerEdge T620
Your BIOS has requested that x2apic be disabled.
This will leave your machine vulnerable to irq-injection attacks.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.32-220.el6.x86_64 #1
Call Trace:
[] ? warn_slowpath_common+0x87/0xc0
[] ? warn_slowpath_fmt+0x46/0x50
[] ? enable_intr_remapping+0x73/0x2af
[] ? enable_IR+0x54/0x6e
[] ? enable_IR_x2apic+0xc0/0x221
[] ? native_smp_prepare_cpus+0x143/0x389
[] ? kernel_init+0x112/0x2f9
[] ? child_rip+0xa/0x20
[] ? kernel_init+0x0/0x2f9
[] ? child_rip+0x0/0x20
---[ end trace a7919e7f17c0a725 ]---
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
Setting APIC routing to physical flat
alloc irq_desc for 93 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 94 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5-2670 0 @ 2.60GHz stepping 07
Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 1, Processors #1 Ok.
Booting Node 0, Processors #2 Ok.
Booting Node 1, Processors #3 Ok.
Booting Node 0, Processors #4 Ok.
Booting Node 1, Processors #5 Ok.
Booting Node 0, Processors #6 Ok.
Booting Node 1, Processors #7 Ok.
Booting Node 0, Processors #8 Ok.
Booting Node 1, Processors #9 Ok.
Booting Node 0, Processors #10 Ok.
Booting Node 1, Processors #11 Ok.
Booting Node 0, Processors #12 Ok.
Booting Node 1, Processors #13 Ok.
Booting Node 0, Processors #14 Ok.
Booting Node 1, Processors #15 Ok.
Booting Node 0, Processors #16 Ok.
Booting Node 1, Processors #17 Ok.
Booting Node 0, Processors #18 Ok.
Booting Node 1, Processors #19 Ok.
Booting Node 0, Processors #20 Ok.
Booting Node 1, Processors #21 Ok.
Booting Node 0, Processors #22 Ok.
Booting Node 1, Processors #23 Ok.
Booting Node 0, Processors #24 Ok.
Booting Node 1, Processors #25 Ok.
Booting Node 0, Processors #26 Ok.
Booting Node 1, Processors #27 Ok.
Booting Node 0, Processors #28 Ok.
Booting Node 1, Processors #29 Ok.
Booting Node 0, Processors #30 Ok.
Booting Node 1, Processors #31 Ok.
Brought up 32 CPUs
Total of 32 processors activated (166377.92 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2616 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
PCI: Dell System detected, enabling pci=bfsort.
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: PME# disabled
pci 0000:00:16.0: reg 10 64bit mmio: [0xdf8fb000-0xdf8fb00f]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:16.1: reg 10 64bit mmio: [0xdf8fc000-0xdf8fc00f]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: PME# disabled
pci 0000:00:1a.0: reg 10 32bit mmio: [0xdf8fd000-0xdf8fd3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10 32bit mmio: [0xdf8fe000-0xdf8fe3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0xdce8-0xdcef]
pci 0000:00:1f.2: reg 14 io port: [0xdcf8-0xdcfb]
pci 0000:00:1f.2: reg 18 io port: [0xdcf0-0xdcf7]
pci 0000:00:1f.2: reg 1c io port: [0xdcfc-0xdcff]
pci 0000:00:1f.2: reg 20 io port: [0xdcc0-0xdcdf]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xdf8ff000-0xdf8ff7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:02:00.0: reg 10 io port: [0xfc00-0xfcff]
pci 0000:02:00.0: reg 14 64bit mmio: [0xdcffc000-0xdcffffff]
pci 0000:02:00.0: reg 1c 64bit mmio: [0xdcf80000-0xdcfbffff]
pci 0000:02:00.0: reg 30 32bit mmio pref: [0xdc000000-0xdc01ffff]
pci 0000:02:00.0: supports D1 D2
pci 0000:00:02.0: bridge io port: [0xf000-0xffff]
pci 0000:00:02.0: bridge 32bit mmio: [0xdc000000-0xdcffffff]
pci 0000:06:00.0: reg 10 32bit mmio: [0xddd00000-0xdddfffff]
pci 0000:06:00.0: reg 18 io port: [0xecc0-0xecdf]
pci 0000:06:00.0: reg 1c 32bit mmio: [0xddff8000-0xddffbfff]
pci 0000:06:00.0: reg 30 32bit mmio pref: [0xdd000000-0xdd0fffff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:06:00.1: reg 10 32bit mmio: [0xdde00000-0xddefffff]
pci 0000:06:00.1: reg 18 io port: [0xece0-0xecff]
pci 0000:06:00.1: reg 1c 32bit mmio: [0xddffc000-0xddffffff]
pci 0000:06:00.1: reg 30 32bit mmio pref: [0xdd000000-0xdd0fffff]
pci 0000:06:00.1: PME# supported from D0 D3hot D3cold
pci 0000:06:00.1: PME# disabled
pci 0000:00:1c.4: bridge io port: [0xe000-0xefff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xdd000000-0xddffffff]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:00:1c.7: bridge 32bit mmio: [0xde000000-0xdf7fffff]
pci 0000:00:1c.7: bridge 64bit mmio pref: [0xd8000000-0xd8ffffff]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:08:01.0: PME# supported from D0 D3hot D3cold
pci 0000:08:01.0: PME# disabled
pci 0000:07:00.0: bridge 32bit mmio: [0xde000000-0xdf7fffff]
pci 0000:07:00.0: bridge 64bit mmio pref: [0xd8000000-0xd8ffffff]
pci 0000:08:00.0: bridge 32bit mmio: [0xde000000-0xdeffffff]
pci 0000:08:00.0: bridge 64bit mmio pref: [0xd8000000-0xd8ffffff]
pci 0000:0a:00.0: reg 10 32bit mmio pref: [0xd8000000-0xd8ffffff]
pci 0000:0a:00.0: reg 14 32bit mmio: [0xdeffc000-0xdeffffff]
pci 0000:0a:00.0: reg 18 32bit mmio: [0xde000000-0xde7fffff]
pci 0000:09:00.0: bridge 32bit mmio: [0xde000000-0xdeffffff]
pci 0000:09:00.0: bridge 64bit mmio pref: [0xd8000000-0xd8ffffff]
pci 0000:08:01.0: bridge 32bit mmio: [0xdf700000-0xdf7fffff]
pci 0000:00:1e.0: transparent bridge
pci_bus 0000:00: on NUMA node 0 (pxm 1)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX8._PRT]
pci0000:00: Requesting ACPI _OSC control (0x15)
pci0000:00: ACPI _OSC control (0x15) granted
ACPI: PCI Root Bridge [PCI1] (0000:40)
pci 0000:40:01.0: PME# supported from D0 D3hot D3cold
pci 0000:40:01.0: PME# disabled
pci 0000:40:02.0: PME# supported from D0 D3hot D3cold
pci 0000:40:02.0: PME# disabled
pci 0000:40:03.0: PME# supported from D0 D3hot D3cold
pci 0000:40:03.0: PME# disabled
pci 0000:43:00.0: reg 10 64bit mmio pref: [0xd0040000-0xd004ffff]
pci 0000:43:00.0: reg 18 64bit mmio pref: [0xd0050000-0xd005ffff]
pci 0000:43:00.0: reg 20 64bit mmio pref: [0xd0060000-0xd006ffff]
pci 0000:43:00.0: reg 30 32bit mmio pref: [0xd4000000-0xd403ffff]
pci 0000:43:00.0: PME# supported from D0 D3hot D3cold
pci 0000:43:00.0: PME# disabled
pci 0000:43:00.1: reg 10 64bit mmio pref: [0xd0070000-0xd007ffff]
pci 0000:43:00.1: reg 18 64bit mmio pref: [0xd0080000-0xd008ffff]
pci 0000:43:00.1: reg 20 64bit mmio pref: [0xd0090000-0xd009ffff]
pci 0000:43:00.1: reg 30 32bit mmio pref: [0xd4000000-0xd403ffff]
pci 0000:43:00.1: PME# supported from D0 D3hot D3cold
pci 0000:43:00.1: PME# disabled
pci 0000:43:00.2: reg 10 64bit mmio pref: [0xd00a0000-0xd00affff]
pci 0000:43:00.2: reg 18 64bit mmio pref: [0xd00b0000-0xd00bffff]
pci 0000:43:00.2: reg 20 64bit mmio pref: [0xd00c0000-0xd00cffff]
pci 0000:43:00.2: reg 30 32bit mmio pref: [0xd4000000-0xd403ffff]
pci 0000:43:00.2: PME# supported from D0 D3hot D3cold
pci 0000:43:00.2: PME# disabled
pci 0000:43:00.3: reg 10 64bit mmio pref: [0xd00d0000-0xd00dffff]
pci 0000:43:00.3: reg 18 64bit mmio pref: [0xd00e0000-0xd00effff]
pci 0000:43:00.3: reg 20 64bit mmio pref: [0xd00f0000-0xd00fffff]
pci 0000:43:00.3: reg 30 32bit mmio pref: [0xd4000000-0xd403ffff]
pci 0000:43:00.3: PME# supported from D0 D3hot D3cold
pci 0000:43:00.3: PME# disabled
pci 0000:40:03.0: bridge 32bit mmio: [0xd4000000-0xd47fffff]
pci 0000:40:03.0: bridge 64bit mmio pref: [0xd0000000-0xd00fffff]
pci_bus 0000:40: on NUMA node 1 (pxm 2)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.PEXB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.PEXC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.PEXD._PRT]
pci0000:40: Requesting ACPI _OSC control (0x15)
pci0000:40: ACPI _OSC control (0x15) granted
ACPI: PCI Root Bridge [P0B1] (0000:3f)
pci_bus 0000:3f: on NUMA node 0 (pxm 1)
pci0000:3f: Requesting ACPI _OSC control (0x15)
pci0000:3f: ACPI _OSC control (0x15) granted
ACPI: PCI Root Bridge [P1B1] (0000:7f)
pci_bus 0000:7f: on NUMA node 1 (pxm 2)
pci0000:7f: Requesting ACPI _OSC control (0x15)
pci0000:7f: ACPI _OSC control (0x15) granted
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 11 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 11 *14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *11 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 11 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 *6 7 11 14 15)
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 11 *14 15)
vgaarb: device added: PCI:0000:0a:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:0a:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 88, 89, 90, 91, 92, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
alloc irq_2_iommu on node 0
hpet: hpet2 irq 88 for MSI
alloc irq_2_iommu on node 0
hpet: hpet3 irq 89 for MSI
alloc irq_2_iommu on node 0
hpet: hpet4 irq 90 for MSI
alloc irq_2_iommu on node 0
hpet: hpet5 irq 91 for MSI
alloc irq_2_iommu on node 0
hpet: hpet6 irq 92 for MSI
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: ioport range 0x880-0x8ff has been reserved
system 00:07: ioport range 0x900-0x91f has been reserved
system 00:07: ioport range 0x920-0x923 has been reserved
system 00:07: ioport range 0x924-0x924 has been reserved
system 00:07: ioport range 0x370-0x377 has been reserved
system 00:07: ioport range 0xca0-0xca7 has been reserved
system 00:07: ioport range 0xca9-0xcab has been reserved
system 00:07: ioport range 0xcad-0xcaf has been reserved
system 00:07: ioport range 0xcb0-0xcbf has been reserved
system 00:08: ioport range 0xca8-0xca8 has been reserved
system 00:08: ioport range 0xcac-0xcac has been reserved
system 00:09: iomem range 0xe0000000-0xe3efffff has been reserved
system 00:0b: iomem range 0xe4000000-0xe7ffffff has been reserved
system 00:0d: iomem range 0xe3f00000-0xe3ffffff has been reserved
system 00:0e: iomem range 0xdf900000-0xdf901fff has been reserved
system 00:0f: iomem range 0xd4800000-0xd4801fff has been reserved
pci 0000:06:00.1: BAR 6: address space collision on of device [0xdd000000-0xdd0fffff]
pci 0000:43:00.1: BAR 6: address space collision on of device [0xd4000000-0xd403ffff]
pci 0000:43:00.2: BAR 6: address space collision on of device [0xd4000000-0xd403ffff]
pci 0000:43:00.3: BAR 6: address space collision on of device [0xd4000000-0xd403ffff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem disabled]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
pci 0000:00:02.0: bridge window [0xf000-0xffff]
pci 0000:00:02.0: bridge window [0xdc000000-0xdcffffff]
pci 0000:00:02.0: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 03-03]
pci 0000:00:03.0: PCI bridge, secondary bus 0000:03
pci 0000:00:03.0: bridge window [io disabled]
pci 0000:00:03.0: bridge window [mem disabled]
pci 0000:00:03.0: bridge window [mem pref disabled]
pci 0000:00:11.0: PCI bridge to [bus 04-04]
pci 0000:00:11.0: PCI bridge, secondary bus 0000:04
pci 0000:00:11.0: bridge window [io disabled]
pci 0000:00:11.0: bridge window [mem disabled]
pci 0000:00:11.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem disabled]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:00:1c.4: PCI bridge to [bus 06-06]
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.4: bridge window [0xe000-0xefff]
pci 0000:00:1c.4: bridge window [0xdd000000-0xddffffff]
pci 0000:00:1c.4: bridge window [0xc0000000-0xc00fffff]
pci 0000:09:00.0: PCI bridge to [bus 0a-0a]
pci 0000:09:00.0: PCI bridge, secondary bus 0000:0a
pci 0000:09:00.0: bridge window [io disabled]
pci 0000:09:00.0: bridge window [0xde000000-0xdeffffff]
pci 0000:09:00.0: bridge window [0xd8000000-0xd8ffffff]
pci 0000:08:00.0: PCI bridge to [bus 09-0a]
pci 0000:08:00.0: PCI bridge, secondary bus 0000:09
pci 0000:08:00.0: bridge window [io disabled]
pci 0000:08:00.0: bridge window [0xde000000-0xdeffffff]
pci 0000:08:00.0: bridge window [0xd8000000-0xd8ffffff]
pci 0000:08:01.0: PCI bridge to [bus 0b-0b]
pci 0000:08:01.0: PCI bridge, secondary bus 0000:0b
pci 0000:08:01.0: bridge window [io disabled]
pci 0000:08:01.0: bridge window [0xdf700000-0xdf7fffff]
pci 0000:08:01.0: bridge window [mem pref disabled]
pci 0000:07:00.0: PCI bridge to [bus 08-0b]
pci 0000:07:00.0: PCI bridge, secondary bus 0000:08
pci 0000:07:00.0: bridge window [io disabled]
pci 0000:07:00.0: bridge window [0xde000000-0xdf7fffff]
pci 0000:07:00.0: bridge window [0xd8000000-0xd8ffffff]
pci 0000:00:1c.7: PCI bridge to [bus 07-0b]
pci 0000:00:1c.7: PCI bridge, secondary bus 0000:07
pci 0000:00:1c.7: bridge window [io disabled]
pci 0000:00:1c.7: bridge window [0xde000000-0xdf7fffff]
pci 0000:00:1c.7: bridge window [0xd8000000-0xd8ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 0c-0c]
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
alloc irq_desc for 53 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:02.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:11.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:11.0: setting latency timer to 64
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:07:00.0: setting latency timer to 64
pci 0000:08:00.0: setting latency timer to 64
pci 0000:09:00.0: setting latency timer to 64
pci 0000:08:01.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:40:01.0: PCI bridge to [bus 41-41]
pci 0000:40:01.0: PCI bridge, secondary bus 0000:41
pci 0000:40:01.0: bridge window [io disabled]
pci 0000:40:01.0: bridge window [mem disabled]
pci 0000:40:01.0: bridge window [mem pref disabled]
pci 0000:40:02.0: PCI bridge to [bus 42-42]
pci 0000:40:02.0: PCI bridge, secondary bus 0000:42
pci 0000:40:02.0: bridge window [io disabled]
pci 0000:40:02.0: bridge window [mem disabled]
pci 0000:40:02.0: bridge window [mem pref disabled]
pci 0000:40:03.0: PCI bridge to [bus 43-43]
pci 0000:40:03.0: PCI bridge, secondary bus 0000:43
pci 0000:40:03.0: bridge window [io disabled]
pci 0000:40:03.0: bridge window [0xd4000000-0xd47fffff]
pci 0000:40:03.0: bridge window [0xd0000000-0xd00fffff]
alloc irq_desc for 85 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pci 0000:40:01.0: PCI INT A -> GSI 85 (level, low) -> IRQ 85
pci 0000:40:01.0: setting latency timer to 64
pci 0000:40:02.0: PCI INT A -> GSI 85 (level, low) -> IRQ 85
pci 0000:40:02.0: setting latency timer to 64
pci 0000:40:03.0: PCI INT A -> GSI 85 (level, low) -> IRQ 85
pci 0000:40:03.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 0 io: [0xf000-0xffff]
pci_bus 0000:02: resource 1 mem: [0xdc000000-0xdcffffff]
pci_bus 0000:06: resource 0 io: [0xe000-0xefff]
pci_bus 0000:06: resource 1 mem: [0xdd000000-0xddffffff]
pci_bus 0000:06: resource 2 pref mem [0xc0000000-0xc00fffff]
pci_bus 0000:07: resource 1 mem: [0xde000000-0xdf7fffff]
pci_bus 0000:07: resource 2 pref mem [0xd8000000-0xd8ffffff]
pci_bus 0000:08: resource 1 mem: [0xde000000-0xdf7fffff]
pci_bus 0000:08: resource 2 pref mem [0xd8000000-0xd8ffffff]
pci_bus 0000:09: resource 1 mem: [0xde000000-0xdeffffff]
pci_bus 0000:09: resource 2 pref mem [0xd8000000-0xd8ffffff]
pci_bus 0000:0a: resource 1 mem: [0xde000000-0xdeffffff]
pci_bus 0000:0a: resource 2 pref mem [0xd8000000-0xd8ffffff]
pci_bus 0000:0b: resource 1 mem: [0xdf700000-0xdf7fffff]
pci_bus 0000:0c: resource 3 io: [0x00-0xffff]
pci_bus 0000:0c: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:40: resource 0 io: [0x00-0xffff]
pci_bus 0000:40: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:43: resource 1 mem: [0xd4000000-0xd47fffff]
pci_bus 0000:43: resource 2 pref mem [0xd0000000-0xd00fffff]
pci_bus 0000:3f: resource 0 io: [0x00-0xffff]
pci_bus 0000:3f: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:7f: resource 0 io: [0x00-0xffff]
pci_bus 0000:7f: resource 1 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:0a:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15173k freed
DMAR: Unsupported device scope
audit: initializing netlink socket (disabled)
type=2000 audit(1347541761.389:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 4BB1E63D18B42658
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 95 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:01.0: irq 95 for MSI/MSI-X
pcieport 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 96 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:02.0: irq 96 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 97 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:03.0: irq 97 for MSI/MSI-X
pcieport 0000:00:11.0: setting latency timer to 64
alloc irq_desc for 98 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:11.0: irq 98 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 99 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:1c.0: irq 99 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 100 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:1c.4: irq 100 for MSI/MSI-X
pcieport 0000:00:1c.7: setting latency timer to 64
alloc irq_desc for 101 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:1c.7: irq 101 for MSI/MSI-X
pcieport 0000:40:01.0: setting latency timer to 64
alloc irq_desc for 102 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:40:01.0: irq 102 for MSI/MSI-X
pcieport 0000:40:02.0: setting latency timer to 64
alloc irq_desc for 103 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:40:02.0: irq 103 for MSI/MSI-X
pcieport 0000:40:03.0: setting latency timer to 64
alloc irq_desc for 104 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:40:03.0: irq 104 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
processor LNXCPU:04: registered as cooling_device4
processor LNXCPU:05: registered as cooling_device5
processor LNXCPU:06: registered as cooling_device6
processor LNXCPU:07: registered as cooling_device7
processor LNXCPU:08: registered as cooling_device8
processor LNXCPU:09: registered as cooling_device9
processor LNXCPU:0a: registered as cooling_device10
processor LNXCPU:0b: registered as cooling_device11
processor LNXCPU:0c: registered as cooling_device12
processor LNXCPU:0d: registered as cooling_device13
processor LNXCPU:0e: registered as cooling_device14
processor LNXCPU:0f: registered as cooling_device15
processor LNXCPU:10: registered as cooling_device16
processor LNXCPU:11: registered as cooling_device17
processor LNXCPU:12: registered as cooling_device18
processor LNXCPU:13: registered as cooling_device19
processor LNXCPU:14: registered as cooling_device20
processor LNXCPU:15: registered as cooling_device21
processor LNXCPU:16: registered as cooling_device22
processor LNXCPU:17: registered as cooling_device23
processor LNXCPU:18: registered as cooling_device24
processor LNXCPU:19: registered as cooling_device25
processor LNXCPU:1a: registered as cooling_device26
processor LNXCPU:1b: registered as cooling_device27
processor LNXCPU:1c: registered as cooling_device28
processor LNXCPU:1d: registered as cooling_device29
processor LNXCPU:1e: registered as cooling_device30
processor LNXCPU:1f: registered as cooling_device31
ERST: Could not register with persistent store
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
alloc irq_desc for 23 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 23, io mem 0xdf8fd000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-220.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
alloc irq_desc for 22 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 22, io mem 0xdf8fe000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-220.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2012-09-13 13:09:23 UTC (1347541763)
Initalizing network drop monitor service
Freeing unused kernel memory: 1244k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1040k freed
Freeing unused kernel memory: 1760k freed
dracut: dracut-004-256.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
megasas: 00.00.05.40-rh2 Thu. Aug. 4 17:00:00 PDT 2011
megasas: 0x1000:0x005b:0x1028:0x1f35: bus 2:slot 0:func 0
alloc irq_desc for 40 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
megaraid_sas 0000:02:00.0: setting latency timer to 64
megasas: FW now in Ready state
alloc irq_desc for 105 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 105 for MSI/MSI-X
usb 1-1: new high speed USB device using ehci_hcd and address 2
megasas:IOC Init cmd success
megasas: INIT adapter done
scsi0 : LSI SAS based MegaRAID driver
scsi 0:0:0:0: Direct-Access DELL PERC H710 3.13 PQ: 0 ANSI: 5
scsi 0:2:0:0: Direct-Access DELL PERC H710 3.13 PQ: 0 ANSI: 5
ACPI: WMI: Mapper loaded
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ahci 0000:00:1f.2: version 3.0
alloc irq_desc for 20 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ahci 0000:00:1f.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20
alloc irq_desc for 106 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ahci 0000:00:1f.2: irq 106 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
ata1: SATA max UDMA/133 abar m2048@0xdf8ff000 port 0xdf8ff100 irq 106
ata2: SATA max UDMA/133 abar m2048@0xdf8ff000 port 0xdf8ff180 irq 106
ata3: SATA max UDMA/133 abar m2048@0xdf8ff000 port 0xdf8ff200 irq 106
ata4: SATA max UDMA/133 abar m2048@0xdf8ff000 port 0xdf8ff280 irq 106
ata5: SATA max UDMA/133 abar m2048@0xdf8ff000 port 0xdf8ff300 irq 106
ata6: SATA max UDMA/133 abar m2048@0xdf8ff000 port 0xdf8ff380 irq 106
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.6: new high speed USB device using ehci_hcd and address 3
usb 1-1.6: New USB device found, idVendor=0624, idProduct=0248
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.6: Product: Gadget USB HUB
usb 1-1.6: Manufacturer: no manufacturer
usb 1-1.6: SerialNumber: 0123456789
usb 1-1.6: configuration #1 chosen from 1 choice
hub 1-1.6:1.0: USB hub found
hub 1-1.6:1.0: 6 ports detected
ata1: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
usb 2-1.2: new low speed USB device using ehci_hcd and address 3
ata5.00: ATAPI: HL-DT-ST DVD-ROM DH40N, A101, max UDMA/100, ATAPI AN
ata5.00: configured for UDMA/100
scsi 5:0:0:0: CD-ROM HL-DT-ST DVD-ROM DH40N A101 PQ: 0 ANSI: 5
usb 2-1.2: New USB device found, idVendor=413c, idProduct=2003
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2: Product: Dell USB Keyboard
usb 2-1.2: Manufacturer: Dell
usb 2-1.2: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input2
generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.2/input0
usb 2-1.4: new low speed USB device using ehci_hcd and address 4
usb 2-1.4: New USB device found, idVendor=04ca, idProduct=0061
usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1.4: Product: USB Optical Mouse
usb 2-1.4: configuration #1 chosen from 1 choice
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input3
generic-usb 0003:04CA:0061.0002: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.4/input0
sd 0:2:0:0: [sda] 1402994688 512-byte logical blocks: (718 GB/669 GiB)
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08
sd 0:2:0:0: [sda] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:2:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 62x/125x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
usb 1-1.6.1: new high speed USB device using ehci_hcd and address 4
usb 1-1.6.1: New USB device found, idVendor=0624, idProduct=0249
usb 1-1.6.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6
usb 1-1.6.1: Product: Keyboard/Mouse Function
usb 1-1.6.1: Manufacturer: Avocent
usb 1-1.6.1: SerialNumber: 20110426
usb 1-1.6.1: configuration #1 chosen from 1 choice
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.0/input/input4
generic-usb 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.6.1/input0
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.1/input/input5
generic-usb 0003:0624:0249.0004: input,hidraw3: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.6.1/input1
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.2/input/input6
generic-usb 0003:0624:0249.0005: input,hidraw4: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.6.1/input2
dracut: Scanning devices sda3 for LVM logical volumes VolGroup/LogVol00
dracut: inactive '/dev/VolGroup/LogVol01' [645.07 GiB] inherit
dracut: inactive '/dev/VolGroup/LogVol00' [19.53 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/VolGroup-LogVol00
dracut: Loading SELinux policy
type=1404 audit(1347541769.433:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 225596 rules.
SELinux: 2048 avtab hash slots, 225596 rules.
SELinux: 9 users, 12 roles, 3576 types, 179 bools, 1 sens, 1024 cats
SELinux: 81 classes, 225596 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1347541770.041:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
readahead: starting
udev: starting version 147
sd 0:2:0:0: Attached scsi generic sg0 type 0
sr 5:0:0:0: Attached scsi generic sg1 type 5
dca service started, version 1.12.1
Intel(R) Gigabit Ethernet Network Driver - version 3.0.6-k
Copyright (c) 2007-2011 Intel Corporation.
igb 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
igb 0000:06:00.0: setting latency timer to 64
alloc irq_desc for 107 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:06:00.0: irq 107 for MSI/MSI-X
alloc irq_desc for 108 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:06:00.0: irq 108 for MSI/MSI-X
alloc irq_desc for 109 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:06:00.0: irq 109 for MSI/MSI-X
alloc irq_desc for 110 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:06:00.0: irq 110 for MSI/MSI-X
alloc irq_desc for 111 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:06:00.0: irq 111 for MSI/MSI-X
alloc irq_desc for 112 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:06:00.0: irq 112 for MSI/MSI-X
alloc irq_desc for 113 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:06:00.0: irq 113 for MSI/MSI-X
alloc irq_desc for 114 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:06:00.0: irq 114 for MSI/MSI-X
alloc irq_desc for 115 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:06:00.0: irq 115 for MSI/MSI-X
igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:06:00.0: eth0: (PCIe:5.0Gb/s:Width x2) d4:ae:52:a0:dd:af
igb 0000:06:00.0: eth0: PBA No: 105600-000
igb 0000:06:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
alloc irq_desc for 17 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:06:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
igb 0000:06:00.1: setting latency timer to 64
alloc irq_desc for 116 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:06:00.1: irq 116 for MSI/MSI-X
alloc irq_desc for 117 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:06:00.1: irq 117 for MSI/MSI-X
alloc irq_desc for 118 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:06:00.1: irq 118 for MSI/MSI-X
alloc irq_desc for 119 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:06:00.1: irq 119 for MSI/MSI-X
alloc irq_desc for 120 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:06:00.1: irq 120 for MSI/MSI-X
alloc irq_desc for 121 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:06:00.1: irq 121 for MSI/MSI-X
alloc irq_desc for 122 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:06:00.1: irq 122 for MSI/MSI-X
alloc irq_desc for 123 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:06:00.1: irq 123 for MSI/MSI-X
alloc irq_desc for 124 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:06:00.1: irq 124 for MSI/MSI-X
igb 0000:06:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:06:00.1: eth1: (PCIe:5.0Gb/s:Width x2) d4:ae:52:a0:dd:b0
igb 0000:06:00.1: eth1: PBA No: 105600-000
igb 0000:06:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a Patsburg TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
EDAC MC: Ver: 2.1.0 Nov 9 2011
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC MC0: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#0': DEV 0000:3f:0e.0
EDAC MC1: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#1': DEV 0000:7f:0e.0
EDAC sbridge: Driver loaded.
tg3.c:v3.119 (May 18, 2011)
alloc irq_desc for 80 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
tg3 0000:43:00.0: PCI INT A -> GSI 80 (level, low) -> IRQ 80
tg3 0000:43:00.0: setting latency timer to 64
tg3 0000:43:00.0: eth2: Tigon3 [partno(none) rev 5719001] (PCI Express) MAC address 00:10:18:e5:92:9c
tg3 0000:43:00.0: eth2: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:43:00.0: eth2: RXcsums[0] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[0]
tg3 0000:43:00.0: eth2: dma_rwctrl[00000001] dma_mask[64-bit]
alloc irq_desc for 84 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
tg3 0000:43:00.1: PCI INT B -> GSI 84 (level, low) -> IRQ 84
tg3 0000:43:00.1: setting latency timer to 64
tg3 0000:43:00.1: eth3: Tigon3 [partno(none) rev 5719001] (PCI Express) MAC address 00:10:18:e5:92:9d
tg3 0000:43:00.1: eth3: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:43:00.1: eth3: RXcsums[0] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[0]
tg3 0000:43:00.1: eth3: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:43:00.2: PCI INT A -> GSI 80 (level, low) -> IRQ 80
tg3 0000:43:00.2: setting latency timer to 64
tg3 0000:43:00.2: eth4: Tigon3 [partno(none) rev 5719001] (PCI Express) MAC address 00:10:18:e5:92:9e
tg3 0000:43:00.2: eth4: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:43:00.2: eth4: RXcsums[0] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[0]
tg3 0000:43:00.2: eth4: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:43:00.3: PCI INT B -> GSI 84 (level, low) -> IRQ 84
tg3 0000:43:00.3: setting latency timer to 64
tg3 0000:43:00.3: eth5: Tigon3 [partno(none) rev 5719001] (PCI Express) MAC address 00:10:18:e5:92:9f
tg3 0000:43:00.3: eth5: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:43:00.3: eth5: RXcsums[0] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[0]
tg3 0000:43:00.3: eth5: dma_rwctrl[00000001] dma_mask[64-bit]
udev: renamed network interface eth0 to em1
microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU2 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU3 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU4 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU5 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
udev: renamed network interface eth1 to em2
microcode: CPU6 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU7 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU8 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU9 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU10 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU11 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU12 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU13 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU14 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU15 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU16 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU17 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU18 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU19 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU20 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU21 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU22 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU23 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU24 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU25 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU26 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU27 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
udev: renamed network interface eth3 to p5p2
microcode: CPU28 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU29 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU30 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU31 sig=0x206d7, pf=0x1, revision=0x70b
platform microcode: firmware: requesting intel-ucode/06-2d-07
Microcode Update Driver: v2.00 , Peter Oruba
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
udev: renamed network interface eth5 to p5p4
udev: renamed network interface eth2 to p5p1
ACPI Error: No handler for Region [SYSI] (ffff882019d85468) [IPMI] (20090903/evregion-319)
ACPI Error: Region IPMI(7) has no handler (20090903/exfldio-295)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff882019d84830), AE_NOT_EXIST
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff882019d847e0), AE_NOT_EXIST
ACPI Exception: AE_NOT_EXIST, Evaluating _PMC (20090903/power_meter-759)
udev: renamed network interface eth4 to p5p3
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda1, type ext4), uses xattr
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev dm-1, type ext4), uses xattr
Adding 4095992k swap on /dev/sda2. Priority:-1 extents:1 across:4095992k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
igb: em1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
Bridge firewalling registered
device virbr0-nic entered promiscuous mode
New device virbr0-nic does not support netpoll
Disabling netpoll for virbr0
virbr0: starting userspace STP failed, starting kernel STP
ip_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
device em1 entered promiscuous mode
em1: no IPv6 routers present
br0: port 1(em1) entering learning state
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
lo: Disabled Privacy Extensions
SELinux: initialized (dev proc, type proc), uses genfs_contexts
br0: no IPv6 routers present
br0: port 1(em1) entering forwarding state
br0: port 1(em1) entering disabled state
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): em1: link is not ready
igb: em1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
br0: port 1(em1) entering learning state
em1: no IPv6 routers present
br0: port 1(em1) entering forwarding state
device vnet0 entered promiscuous mode
New device vnet0 does not support netpoll
Disabling netpoll for br0
br0: port 2(vnet0) entering learning state
vnet0: no IPv6 routers present
br0: port 2(vnet0) entering forwarding state
kvm: 4716: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xabcd
br0: port 2(vnet0) entering disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entering disabled state
device vnet0 entered promiscuous mode
New device vnet0 does not support netpoll
Disabling netpoll for br0
br0: port 2(vnet0) entering learning state
vnet0: no IPv6 routers present
br0: port 2(vnet0) entering forwarding state
kvm: 5188: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xabcd
br0: port 2(vnet0) entering disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entering disabled state
device vnet0 entered promiscuous mode
New device vnet0 does not support netpoll
Disabling netpoll for br0
br0: port 2(vnet0) entering learning state
vnet0: no IPv6 routers present
br0: port 2(vnet0) entering forwarding state
kvm: 5690: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xabcd
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
ip_tables: (C) 2000-2006 Netfilter Core Team
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
lo: Disabled Privacy Extensions
SELinux: initialized (dev proc, type proc), uses genfs_contexts
br0: port 2(vnet0) entering disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entering disabled state
device vnet0 entered promiscuous mode
New device vnet0 does not support netpoll
Disabling netpoll for br0
br0: port 2(vnet0) entering learning state
vnet0: no IPv6 routers present
br0: port 2(vnet0) entering forwarding state
kvm: 6138: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xabcd
fuse init (API version 7.13)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
EXT4-fs (dm-1): Unaligned AIO/DIO on inode 19267586 by qemu-kvm; performance will be poor.
kvm: 6138: cpu0 unhandled wrmsr: 0x198 data 0
kvm: 6138: cpu1 unhandled wrmsr: 0x198 data 0
kvm: 6138: cpu2 unhandled wrmsr: 0x198 data 0
kvm: 6138: cpu3 unhandled wrmsr: 0x198 data 0
kvm: 6138: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xabcd
br0: port 2(vnet0) entering disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entering disabled state
device vnet0 entered promiscuous mode
New device vnet0 does not support netpoll
Disabling netpoll for br0
br0: port 2(vnet0) entering learning state
kvm: 8777: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xabcd
vnet0: no IPv6 routers present
br0: port 2(vnet0) entering forwarding state
br0: port 2(vnet0) entering disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entering disabled state
device vnet0 entered promiscuous mode
New device vnet0 does not support netpoll
Disabling netpoll for br0
br0: port 2(vnet0) entering learning state
vnet0: no IPv6 routers present
br0: port 2(vnet0) entering forwarding state
kvm: 9423: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xabcd
kvm: 9423: cpu0 unhandled wrmsr: 0x198 data 0
kvm: 9423: cpu1 unhandled wrmsr: 0x198 data 0
kvm: 9423: cpu2 unhandled wrmsr: 0x198 data 0
kvm: 9423: cpu3 unhandled wrmsr: 0x198 data 0
kvm: 9423: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xabcd
br0: port 2(vnet0) entering disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entering disabled state
device vnet0 entered promiscuous mode
New device vnet0 does not support netpoll
Disabling netpoll for br0
br0: port 2(vnet0) entering learning state
device vnet1 entered promiscuous mode
br0: port 3(vnet1) entering learning state
device vnet2 entered promiscuous mode
br0: port 4(vnet2) entering learning state
vnet0: no IPv6 routers present
kvm: 12308: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xabcd
br0: port 2(vnet0) entering forwarding state
kvm: 12348: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xabcd
vnet1: no IPv6 routers present
vnet2: no IPv6 routers present
kvm: 12388: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xabcd
br0: port 3(vnet1) entering forwarding state
br0: port 4(vnet2) entering forwarding state
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
device vnet3 entered promiscuous mode
br0: port 5(vnet3) entering learning state
kvm: 12630: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xabcd
vnet3: no IPv6 routers present
br0: port 5(vnet3) entering forwarding state
device vnet4 entered promiscuous mode
br0: port 6(vnet4) entering learning state
vnet4: no IPv6 routers present
br0: port 6(vnet4) entering forwarding state
kvm: 13669: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xabcd
kvm: 13669: cpu0 unhandled wrmsr: 0x198 data 0
kvm: 13669: cpu1 unhandled wrmsr: 0x198 data 0
kvm: 13669: cpu2 unhandled wrmsr: 0x198 data 0
kvm: 13669: cpu3 unhandled wrmsr: 0x198 data 0
kvm: 13669: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xabcd
br0: port 6(vnet4) entering disabled state
device vnet4 left promiscuous mode
br0: port 6(vnet4) entering disabled state
device vnet4 entered promiscuous mode
br0: port 6(vnet4) entering learning state
device vnet5 entered promiscuous mode
br0: port 7(vnet5) entering learning state
device vnet6 entered promiscuous mode
br0: port 8(vnet6) entering learning state
vnet4: no IPv6 routers present
kvm: 15595: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xabcd
device vnet7 entered promiscuous mode
br0: port 9(vnet7) entering learning state
br0: port 6(vnet4) entering forwarding state
vnet5: no IPv6 routers present
kvm: 15641: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xabcd
br0: port 7(vnet5) entering forwarding state
kvm: 15689: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xabcd
vnet6: no IPv6 routers present
br0: port 8(vnet6) entering forwarding state
vnet7: no IPv6 routers present
kvm: 15721: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xabcd
br0: port 9(vnet7) entering forwarding state
br0: port 3(vnet1) entering disabled state
device vnet1 left promiscuous mode
br0: port 3(vnet1) entering disabled state
device vnet1 entered promiscuous mode
br0: port 3(vnet1) entering learning state
vnet1: no IPv6 routers present
kvm: 17090: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xabcd
br0: port 3(vnet1) entering forwarding state
br0: port 6(vnet4) entering disabled state
device vnet4 left promiscuous mode
br0: port 6(vnet4) entering disabled state
device vnet4 entered promiscuous mode
br0: port 6(vnet4) entering learning state
vnet4: no IPv6 routers present
kvm: 18382: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xabcd
br0: port 6(vnet4) entering forwarding state
br0: port 6(vnet4) entering disabled state
device vnet4 left promiscuous mode
br0: port 6(vnet4) entering disabled state
device vnet4 entered promiscuous mode
br0: port 6(vnet4) entering learning state
vnet4: no IPv6 routers present
kvm: 18630: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xabcd
br0: port 6(vnet4) entering forwarding state
kvm: 17090: cpu0 unhandled wrmsr: 0x198 data 0
kvm: 17090: cpu1 unhandled wrmsr: 0x198 data 0
kvm: 17090: cpu2 unhandled wrmsr: 0x198 data 0
kvm: 17090: cpu3 unhandled wrmsr: 0x198 data 0
kvm: 17090: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xabcd
kvm: 17090: cpu0 unhandled wrmsr: 0x198 data 0
kvm: 17090: cpu1 unhandled wrmsr: 0x198 data 0
kvm: 17090: cpu2 unhandled wrmsr: 0x198 data 0
kvm: 17090: cpu3 unhandled wrmsr: 0x198 data 0
kvm: 17090: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xabcd
kvm: 17090: cpu0 unhandled wrmsr: 0x198 data 0
kvm: 17090: cpu1 unhandled wrmsr: 0x198 data 0
kvm: 17090: cpu2 unhandled wrmsr: 0x198 data 0
kvm: 17090: cpu3 unhandled wrmsr: 0x198 data 0
kvm: 17090: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xabcd
kvm: 17090: cpu0 unhandled wrmsr: 0x198 data 0
kvm: 17090: cpu1 unhandled wrmsr: 0x198 data 0
kvm: 17090: cpu2 unhandled wrmsr: 0x198 data 0
kvm: 17090: cpu3 unhandled wrmsr: 0x198 data 0
kvm: 17090: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xabcd
kvm: 17090: cpu0 unhandled wrmsr: 0x198 data 0
kvm: 17090: cpu1 unhandled wrmsr: 0x198 data 0
kvm: 17090: cpu2 unhandled wrmsr: 0x198 data 0
kvm: 17090: cpu3 unhandled wrmsr: 0x198 data 0
kvm: 17090: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xabcd
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts