dmesg - TEST001
Linux version 2.6.18-308.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-52)) #1 SMP Tue Feb 21 20:06:06 EST 2012
Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
BIOS-provided physical RAM map:
BIOS-e820: 0000000000010000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f690000 (usable)
BIOS-e820: 000000007f690000 - 000000007f6e0000 (reserved)
BIOS-e820: 000000007f6e0000 - 000000007f6e3000 (ACPI NVS)
BIOS-e820: 000000007f6e3000 - 000000007f6f0000 (ACPI data)
BIOS-e820: 000000007f6f0000 - 000000007f700000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
DMI 2.2 present.
DMI: PhoenixAward 945GM/E-ITE8712/945GM/E-ITE8712, BIOS 6.00 PG 03/04/2011
ACPI: RSDP (v000 IntelR ) @ 0x00000000000f7c90
ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007f6e3000
ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007f6e3080
ACPI: IDTS (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007f6e82c0
ACPI: MCFG (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007f6e8300
ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007f6e8240
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050930) @ 0x000000007f6e89a0
ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x03000000) @ 0x0000000000000000
No NUMA configuration found
Faking a node at 0000000000000000-000000007f690000
Bootmem setup node 0 0000000000000000-000000007f690000
bootmap start 1a000 pages 16
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
Setting up node 0 0-7f690
On node 0 totalpages: 513122
DMA zone: 2424 pages, LIFO batch:0
DMA32 zone: 510698 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000f0000
Nosave address range: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 7f700000:60900000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
Built 1 zonelists. Total pages: 513122
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
ACPI: DMAR not present
Memory: 2045472k/2087488k available (2616k kernel code, 41564k reserved, 1671k data, 224k init)
Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.07 BogoMIPS (lpj=1662538)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
Detected 10.390 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3324.54 BogoMIPS (lpj=1662270)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 02
Brought up 2 CPUs
CPU#0: NMI watchdog performance counter calibration - 142->163
CPU#1: NMI watchdog performance counter calibration - 60->80
NMI watchdog testing PASSED.
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 1662.538 MHz processor.
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=248 bytes
migration_cost=55
checking if image is initramfs... it is
Freeing initrd memory: 3418k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH6 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: IRQ 10 override to edge, high
pnp: IRQ 10 override to edge, high
pnp: IRQ 11 override to edge, high
pnp: IRQ 11 override to edge, high
pnp: PnP ACPI: found 16 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: DMAR not present
PCI-GART: No AMD northbridge found.
pnp: 00:0c: ioport range 0x400-0x4bf could not be reserved
pnp: 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:0f: iomem range 0xf0000-0xfffff could not be reserved
pnp: 00:0f: iomem range 0x7f6e0000-0x7f6fffff could not be reserved
pnp: 00:0f: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0f: iomem range 0x100000-0x7f6dffff could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: b000-bfff
MEM window: fd900000-fd9fffff
PREFETCH window 0x00000000fd600000-0x00000000fd6fffff
PCI: Bridge: 0000:00:1c.0
IO window: d000-dfff
MEM window: fdd00000-fddfffff
PREFETCH window 0x00000000fdc00000-0x00000000fdcfffff
PCI: Bridge: 0000:00:1c.1
IO window: c000-cfff
MEM window: fdb00000-fdbfffff
PREFETCH window 0x00000000fda00000-0x00000000fdafffff
PCI: Bridge: 0000:00:1e.0
IO window: e000-efff
MEM window: fd800000-fd8fffff
PREFETCH window 0x00000000fd700000-0x00000000fd7fffff
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1346060492.697:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 48D0A1FBAE482C4C
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.1 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Fan [FAN] (on)
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
ACPI: Thermal Zone [TZ00] (39 C)
ACPI: Thermal Zone [THRM] (40 C)
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 945GME Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xd0000000
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
serial8250: ttyS2 at I/O 0x3e8 (irq = 10) is a 16550A
serial8250: ttyS3 at I/O 0x2e8 (irq = 10) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS2 at I/O 0x3e8 (irq = 10) is a 16550A
00:09: ttyS3 at I/O 0x2e8 (irq = 0) is a 16550A
pnp: Device 00:0a disabled.
pnp: Device 00:0b disabled.
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0: I/O resource 0x1F0-0x1F7 not free.
ide0: ports already in use, skipping probe
Probing IDE interface ide1...
hdd: FD-16X DVD-ROM 7218S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
Initalizing network drop monitor service
Freeing unused kernel memory: 224k freed
Write protecting the kernel read-only data: 530k
GSI 18 sharing vector 0xD9 and IRQ 18
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 217, io mem 0xfdfff000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 217, io base 0x0000fe00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
GSI 19 sharing vector 0xE1 and IRQ 19
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 225, io base 0x0000fd00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
GSI 20 sharing vector 0xE9 and IRQ 20
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 233, io base 0x0000fc00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000fb00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.12
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ata_piix 0000:00:1f.2: 0x170 IDE port busy
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 bmdma 0xfa00 irq 14
ata2: DUMMY
usb 3-1: new low speed USB device using uhci_hcd and address 2
ata1.01: ATA-7: ASINT 32G CentOS5, 20120131, max UDMA/133
ata1.01: 61865984 sectors, multi 1: LBA48
ata1.01: configured for UDMA/133
Vendor: ATA Model: ASINT 32G CentOS Rev: 2012
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 61865984 512-byte hdwr sectors (31675 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 61865984 512-byte hdwr sectors (31675 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2
sd 0:0:1:0: Attached scsi disk sda
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: dm-devel@redhat.com
usb 3-1: configuration #1 chosen from 1 choice
input: HID 0430:0005 as /class/input/input0
input,hidraw0: USB HID v1.00 Keyboard [HID 0430:0005] on usb-0000:00:1d.1-1
device-mapper: dm-raid45: initialized v0.2594l
usb 3-2: new low speed USB device using uhci_hcd and address 3
usb 3-2: configuration #1 chosen from 1 choice
input: USB Optical Mouse as /class/input/input1
input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-2
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
type=1404 audit(1346060516.004:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
security: 3 users, 6 roles, 2067 types, 278 bools, 1 sens, 1024 cats
security: 61 classes, 83426 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1346060516.210:3): policy loaded auid=4294967295 ses=4294967295
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /class/input/input2
hdd: ATAPI 48X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.20
r8169 Gigabit Ethernet driver 2.3LK-1-NAPI loaded
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth0: RTL8168c/8111c at 0xffffc20000026000, 4c:02:89:00:06:93, XID 1c2000c0 IRQ 50
r8169 Gigabit Ethernet driver 2.3LK-1-NAPI loaded
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:03:00.0 to 64
eth1: RTL8168c/8111c at 0xffffc20000028000, 4c:02:89:00:06:94, XID 1c2000c0 IRQ 58
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 225
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64
sd 0:0:1:0: Attached scsi generic sg0 type 0
floppy0: no floppy controllers found
work still pending
lp: driver loaded but no devices found
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Mapper loaded
dell-wmi: No known WMI GUID found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.6 loaded
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 4095992k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:4095992k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
IA-32 Microcode Update Driver: v1.14a
microcode: CPU1 updated from revision 0x57 to 0x5c, date = 10022010
microcode: CPU0 updated from revision 0x57 to 0x5c, date = 10022010
Loading iSCSI transport class v2.0-871.
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
iscsi: registered transport (cxgb3i)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.7 (July 20, 2011)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.0.3 (Aug 04, 2011)
iscsi: registered transport (bnx2i)
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
iscsi: registered transport (be2iscsi)
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
r8169: eth0: link up
r8169: eth0: link up
eth0: no IPv6 routers present
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
INFO: task sendmail:5605 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sendmail D ffff810002536420 0 5605 3144 (NOTLB)
ffff8100370a7d98 0000000000000082 ffff8100370a7da8 ffffffff80063002
0000000000000000 0000000000000008 ffff81000b0e37a0 ffffffff80319b60
000003ece3ad30f5 00000000000007a6 ffff81000b0e3988 0000000000005878
Call Trace:
[] thread_return+0x62/0xfe
[] :jbd:log_wait_commit+0xa3/0xf5
[] autoremove_wake_function+0x0/0x2e
[] :jbd:journal_stop+0x1d3/0x203
[] __writeback_single_inode+0x1dd/0x31c
[] sync_inode+0x24/0x33
[] :ext3:ext3_sync_file+0xce/0xf8
[] do_fsync+0x52/0xa4
[] __do_fsync+0x23/0x36
[] tracesys+0xd5/0xe0
INFO: task syslogd:2574 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
syslogd D ffff810003fe6318 0 2574 1 2577 2559 (NOTLB)
ffff81006fe13d98 0000000000000082 ffff81006fe13da8 ffffffff80063002
0000000000000000 0000000000000009 ffff810070cdf100 ffff81000b0e37a0
000004a2aed0ad4a 0000000000001c5d ffff810070cdf2e8 00000001000006da
Call Trace:
[] thread_return+0x62/0xfe
[] :jbd:log_wait_commit+0xa3/0xf5
[] autoremove_wake_function+0x0/0x2e
[] :jbd:journal_stop+0x1d3/0x203
[] __writeback_single_inode+0x1dd/0x31c
[] do_readv_writev+0x26e/0x291
[] sync_inode+0x24/0x33
[] :ext3:ext3_sync_file+0xce/0xf8
[] do_fsync+0x52/0xa4
[] __do_fsync+0x23/0x36
[] tracesys+0xd5/0xe0
INFO: task sendmail:5605 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sendmail D ffff81000253eaa0 0 5605 3144 (NOTLB)
ffff8100370a7d98 0000000000000082 ffff8100370a7da8 ffffffff80063002
0000000000000000 0000000000000009 ffff81000b0e37a0 ffff81007f668100
000004a2aed0b9a1 0000000000000c57 ffff81000b0e3988 00000001000008de
Call Trace:
[] thread_return+0x62/0xfe
[] :jbd:log_wait_commit+0xa3/0xf5
[] autoremove_wake_function+0x0/0x2e
[] :jbd:journal_stop+0x1d3/0x203
[] __writeback_single_inode+0x1dd/0x31c
[] sync_inode+0x24/0x33
[] :ext3:ext3_sync_file+0xce/0xf8
[] do_fsync+0x52/0xa4
[] __do_fsync+0x23/0x36
[] tracesys+0xd5/0xe0
INFO: task syslogd:2574 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
syslogd D ffff810003fe6318 0 2574 1 2577 2559 (NOTLB)
ffff81006fe13d98 0000000000000082 ffff81006fe13da8 ffffffff80063002
0000000000000000 0000000000000009 ffff810070cdf100 ffff81000b0e37a0
000004a2aed0ad4a 0000000000001c5d ffff810070cdf2e8 00000001000006da
Call Trace:
[] thread_return+0x62/0xfe
[] :jbd:log_wait_commit+0xa3/0xf5
[] autoremove_wake_function+0x0/0x2e
[] :jbd:journal_stop+0x1d3/0x203
[] __writeback_single_inode+0x1dd/0x31c
[] do_readv_writev+0x26e/0x291
[] sync_inode+0x24/0x33
[] :ext3:ext3_sync_file+0xce/0xf8
[] do_fsync+0x52/0xa4
[] __do_fsync+0x23/0x36
[] tracesys+0xd5/0xe0
INFO: task sendmail:5605 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sendmail D ffff81000253eaa0 0 5605 3144 (NOTLB)
ffff8100370a7d98 0000000000000082 ffff8100370a7da8 ffffffff80063002
0000000000000000 0000000000000009 ffff81000b0e37a0 ffff81007f668100
000004a2aed0b9a1 0000000000000c57 ffff81000b0e3988 00000001000008de
Call Trace:
[] thread_return+0x62/0xfe
[] :jbd:log_wait_commit+0xa3/0xf5
[] autoremove_wake_function+0x0/0x2e
[] :jbd:journal_stop+0x1d3/0x203
[] __writeback_single_inode+0x1dd/0x31c
[] sync_inode+0x24/0x33
[] :ext3:ext3_sync_file+0xce/0xf8
[] do_fsync+0x52/0xa4
[] __do_fsync+0x23/0x36
[] tracesys+0xd5/0xe0
INFO: task syslogd:2574 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
syslogd D ffff810002536420 0 2574 1 2577 2559 (NOTLB)
ffff81006fe13d98 0000000000000082 ffff81006fe13da8 ffffffff80063002
0000000000000000 0000000000000009 ffff810070cdf100 ffffffff80319b60
000005014ba9d839 0000000000000998 ffff810070cdf2e8 00000000000d8733
Call Trace:
[] thread_return+0x62/0xfe
[] :jbd:log_wait_commit+0xa3/0xf5
[] autoremove_wake_function+0x0/0x2e
[] :jbd:journal_stop+0x1d3/0x203
[] __writeback_single_inode+0x1dd/0x31c
[] sys_rt_sigreturn+0x283/0x356
[] sync_inode+0x24/0x33
[] :ext3:ext3_sync_file+0xce/0xf8
[] do_fsync+0x52/0xa4
[] __do_fsync+0x23/0x36
[] tracesys+0xd5/0xe0
INFO: task sendmail:5652 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sendmail D ffff81000253eaa0 0 5652 5605 (NOTLB)
ffff81002a7d3d98 0000000000000086 ffff81002a7d3da8 ffffffff80063002
0000000000000000 0000000000000007 ffff81007dc967a0 ffff81007f668100
000004fcad17a3fd 0000000000000716 ffff81007dc96988 0000000100000288
Call Trace:
[] thread_return+0x62/0xfe
[] :jbd:log_wait_commit+0xa3/0xf5
[] autoremove_wake_function+0x0/0x2e
[] process_timeout+0x0/0x5
[] :jbd:journal_stop+0x1d3/0x203
[] __writeback_single_inode+0x1dd/0x31c
[] do_page_fault+0x4cc/0x842
[] sync_inode+0x24/0x33
[] :ext3:ext3_sync_file+0xce/0xf8
[] do_fsync+0x52/0xa4
[] __do_fsync+0x23/0x36
[] tracesys+0xd5/0xe0
INFO: task syslogd:2574 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
syslogd D ffff810003fe6318 0 2574 1 2577 2559 (NOTLB)
ffff81006fe13d98 0000000000000082 ffff81006fe13da8 ffffffff80063002
0000000000000000 0000000000000009 ffff810070cdf100 ffff81006d5427a0
00000525b8be4781 0000000000000f22 ffff810070cdf2e8 00000000000d8733
Call Trace:
[] thread_return+0x62/0xfe
[] :jbd:log_wait_commit+0xa3/0xf5
[] autoremove_wake_function+0x0/0x2e
[] :jbd:journal_stop+0x1d3/0x203
[] __writeback_single_inode+0x1dd/0x31c
[] sys_rt_sigreturn+0x283/0x356
[] sync_inode+0x24/0x33
[] :ext3:ext3_sync_file+0xce/0xf8
[] do_fsync+0x52/0xa4
[] __do_fsync+0x23/0x36
[] tracesys+0xd5/0xe0
INFO: task sendmail:5652 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sendmail D ffff81000253eaa0 0 5652 5605 (NOTLB)
ffff81002a7d3d98 0000000000000086 ffff81002a7d3da8 ffffffff80063002
0000000000000000 0000000000000007 ffff81007dc967a0 ffff81007f668100
00000525b8be4583 0000000000001241 ffff81007dc96988 0000000100000288
Call Trace:
[] thread_return+0x62/0xfe
[] :jbd:log_wait_commit+0xa3/0xf5
[] autoremove_wake_function+0x0/0x2e
[] process_timeout+0x0/0x5
[] :jbd:journal_stop+0x1d3/0x203
[] __writeback_single_inode+0x1dd/0x31c
[] do_page_fault+0x4cc/0x842
[] sync_inode+0x24/0x33
[] :ext3:ext3_sync_file+0xce/0xf8
[] do_fsync+0x52/0xa4
[] __do_fsync+0x23/0x36
[] tracesys+0xd5/0xe0
INFO: task syslogd:2574 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
syslogd D ffff81000253eaa0 0 2574 1 2577 2559 (NOTLB)
ffff81006fe13d98 0000000000000082 ffff81006fe13da8 ffffffff80063002
0000000000000000 0000000000000009 ffff810070cdf100 ffff81007f668100
000005622ef25b6d 0000000000000be5 ffff810070cdf2e8 0000000100000866
Call Trace:
[] thread_return+0x62/0xfe
[] :jbd:log_wait_commit+0xa3/0xf5
[] autoremove_wake_function+0x0/0x2e
[] :jbd:journal_stop+0x1d3/0x203
[] __writeback_single_inode+0x1dd/0x31c
[] do_readv_writev+0x26e/0x291
[] sync_inode+0x24/0x33
[] :ext3:ext3_sync_file+0xce/0xf8
[] do_fsync+0x52/0xa4
[] __do_fsync+0x23/0x36
[] tracesys+0xd5/0xe0
usb 3-1: USB disconnect, address 2
usb 3-2: USB disconnect, address 3
usb 3-1: new low speed USB device using uhci_hcd and address 4
usb 3-1: configuration #1 chosen from 1 choice
input: USB Optical Mouse as /class/input/input3
input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-1
usb 3-1: USB disconnect, address 4
usb 3-1: new low speed USB device using uhci_hcd and address 5
usb 3-1: configuration #1 chosen from 1 choice
input: USB Optical Mouse as /class/input/input4
input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-1
usb 3-1: USB disconnect, address 5
usb 3-1: new low speed USB device using uhci_hcd and address 6
usb 3-1: configuration #1 chosen from 1 choice
input: USB Optical Mouse as /class/input/input5
input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-1
usb 3-1: USB disconnect, address 6
usb 3-1: new low speed USB device using uhci_hcd and address 7
usb 3-1: configuration #1 chosen from 1 choice
input: USB Optical Mouse as /class/input/input6
input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-1