dmesg - py02turbo
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-29-generic-pae (buildd@roseapple) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #46-Ubuntu SMP Fri Jul 27 17:25:43 UTC 2012 (Ubuntu 3.2.0-29.46-generic-pae 3.2.24)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000091800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000df780000 (usable)
[ 0.000000] BIOS-e820: 00000000df780000 - 00000000df7a3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000df7a3000 - 00000000df7e0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000df7e0000 - 00000000df800000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000041f800000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. Z68AP-D3/Z68AP-D3, BIOS FD 03/20/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x41f800 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-CDFFF uncachable
[ 0.000000] CE000-DBFFF write-protect
[ 0.000000] DC000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 100000000 mask F00000000 write-back
[ 0.000000] 3 base 200000000 mask E00000000 write-back
[ 0.000000] 4 base 300000000 mask F00000000 write-back
[ 0.000000] 5 base 400000000 mask FE0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 2, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 3, base: 8GB, range: 8GB, type WB
[ 0.000000] reg 4, base: 12GB, range: 4GB, type WB
[ 0.000000] reg 5, base: 16GB, range: 512MB, type WB
[ 0.000000] total RAM covered: 16384M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 6 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 512MB, type WB
[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 4, base: 8GB, range: 8GB, type WB
[ 0.000000] reg 5, base: 16GB, range: 512MB, type WB
[ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] found SMP MP-table at [c00f5ba0] f5ba0
[ 0.000000] initial memory mapped : 0 - 02000000
[ 0.000000] Base memory trampoline at [c008d000] 8d000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037a00000 page 2M
[ 0.000000] 0037a00000 - 0037bfe000 page 4k
[ 0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
[ 0.000000] RAMDISK: 364ee000 - 3726f000
[ 0.000000] ACPI: RSDP 000f7790 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT df7a3040 00050 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP df7a3100 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT df7a31c0 0503A (v01 GBT GBTUACPI 00001000 MSFT 04000000)
[ 0.000000] ACPI: FACS df780000 00040
[ 0.000000] ACPI: MSDM df7a8340 00055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: HPET df7a8400 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG df7a8480 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: ASPT df7a8600 00034 (v07 GBT PerfTune 312E3042 UTBG 01010101)
[ 0.000000] ACPI: SSPT df7a8640 02380 (v01 GBT SsptHead 312E3042 UTBG 01010101)
[ 0.000000] ACPI: EUDS df7aa9c0 000C0 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: TAMG df7aaa80 00A82 (v01 GBT GBT B0 5455312E BG?? 53450101)
[ 0.000000] ACPI: APIC df7a8240 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT df7ab540 03E74 (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: MATS df7af3c0 0A75F (v01 MATS RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 15996MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037bfe
[ 0.000000] HighMem 0x00037bfe -> 0x0041f800
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000091
[ 0.000000] 0: 0x00000100 -> 0x000df780
[ 0.000000] 0: 0x00100000 -> 0x0041f800
[ 0.000000] On node 0 totalpages: 4189953
[ 0.000000] free_area_init_node: node 0, pgdat c1866a40, node_mem_map ee0fe200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3937 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 31993 pages used for memmap
[ 0.000000] HighMem zone: 3929737 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000091000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at df800000 (gap: df800000:10800000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7b7a000 s34240 r0 d23104 u57344
[ 0.000000] pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4156176
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] allocated 69172992 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0041f800)
[ 0.000000] Memory: 16531640k/17293312k available (5814k kernel code, 228172k reserved, 2841k data, 740k init, 15846920k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc1875000 - 0xc192e000 ( 740 kB)
[ 0.000000] .data : 0xc15adb64 - 0xc1874240 (2841 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15adb64 (5814 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:744 16
[ 0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 3494.254 MHz processor.
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6988.50 BogoMIPS (lpj=13977016)
[ 0.000003] pid_max: default: 32768 minimum: 301
[ 0.000014] Security Framework initialized
[ 0.000021] AppArmor: AppArmor initialized
[ 0.000022] Yama: becoming mindful.
[ 0.000045] Mount-cache hash table entries: 512
[ 0.000105] Initializing cgroup subsys cpuacct
[ 0.000108] Initializing cgroup subsys memory
[ 0.000111] Initializing cgroup subsys devices
[ 0.000112] Initializing cgroup subsys freezer
[ 0.000113] Initializing cgroup subsys blkio
[ 0.000116] Initializing cgroup subsys perf_event
[ 0.000129] CPU: Physical Processor ID: 0
[ 0.000130] CPU: Processor Core ID: 0
[ 0.000132] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.000132] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.000134] mce: CPU supports 9 MCE banks
[ 0.000142] CPU0: Thermal monitoring enabled (TM1)
[ 0.000145] using mwait in idle threads.
[ 0.001361] ACPI: Core revision 20110623
[ 0.011062] ftrace: allocating 26545 entries in 52 pages
[ 0.016233] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.016620] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056295] CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz stepping 07
[ 0.160996] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[ 0.160999] PEBS disabled due to CPU errata.
[ 0.161000] ... version: 3
[ 0.161001] ... bit width: 48
[ 0.161001] ... generic registers: 4
[ 0.161002] ... value mask: 0000ffffffffffff
[ 0.161003] ... max period: 000000007fffffff
[ 0.161004] ... fixed-purpose events: 3
[ 0.161004] ... event mask: 000000070000000f
[ 0.161087] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.161123] CPU 1 irqstacks, hard=f753a000 soft=f753c000
[ 0.161124] Booting Node 0, Processors #1
[ 0.161125] smpboot cpu 1: start_ip = 8d000
[ 0.171415] Initializing CPU#1
[ 0.216988] calibrate_delay_direct() ignoring timer_rate as we had a TSC wrap around start=4277500990 >=post_end=10488917
[ 0.269021] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.269063] CPU 2 irqstacks, hard=f7566000 soft=f7568000
[ 0.269064] #2
[ 0.269065] smpboot cpu 2: start_ip = 8d000
[ 0.279279] Initializing CPU#2
[ 0.377057] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.377101] CPU 3 irqstacks, hard=f757c000 soft=f757e000
[ 0.377102] #3
[ 0.377102] smpboot cpu 3: start_ip = 8d000
[ 0.387317] Initializing CPU#3
[ 0.484995] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.485038] CPU 4 irqstacks, hard=f7596000 soft=f7598000
[ 0.485039] #4
[ 0.485040] smpboot cpu 4: start_ip = 8d000
[ 0.495305] Initializing CPU#4
[ 0.592993] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.593040] CPU 5 irqstacks, hard=f75b4000 soft=f75b6000
[ 0.593041] #5
[ 0.593042] smpboot cpu 5: start_ip = 8d000
[ 0.603256] Initializing CPU#5
[ 0.701035] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.701077] CPU 6 irqstacks, hard=f75e2000 soft=f75e4000
[ 0.701078] #6
[ 0.701079] smpboot cpu 6: start_ip = 8d000
[ 0.711293] Initializing CPU#6
[ 0.808974] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.809016] CPU 7 irqstacks, hard=f75f8000 soft=f75fa000
[ 0.809017] #7 Ok.
[ 0.809018] smpboot cpu 7: start_ip = 8d000
[ 0.819232] Initializing CPU#7
[ 0.917012] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.917027] Brought up 8 CPUs
[ 0.917028] Total of 8 processors activated (55910.12 BogoMIPS).
[ 0.922529] devtmpfs: initialized
[ 0.922588] EVM: security.selinux
[ 0.922588] EVM: security.SMACK64
[ 0.922589] EVM: security.capability
[ 0.922601] PM: Registering ACPI NVS region at df780000 (143360 bytes)
[ 0.923054] print_constraints: dummy:
[ 0.923078] RTC time: 22:30:22, date: 08/29/12
[ 0.923097] NET: Registered protocol family 16
[ 0.923147] Trying to unpack rootfs image as initramfs...
[ 0.923148] EISA bus registered
[ 0.923158] ACPI: bus type pci registered
[ 0.923191] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.923193] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.923193] PCI: Using MMCONFIG for extended config space
[ 0.923194] PCI: Using configuration type 1 for base access
[ 0.923678] bio: create slab at 0
[ 0.923715] ACPI: Added _OSI(Module Device)
[ 0.923716] ACPI: Added _OSI(Processor Device)
[ 0.923717] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.923718] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.924193] ACPI: EC: Look up EC in DSDT
[ 0.927019] ACPI Warning: Incorrect checksum in table [TAMG] - 0xBC, should be 0xBB (20110623/tbutils-314)
[ 0.927545] ACPI: Interpreter enabled
[ 0.927553] ACPI: (supports S0 S3 S4 S5)
[ 0.927561] ACPI: Using IOAPIC for interrupt routing
[ 0.929466] ACPI: No dock devices found.
[ 0.929467] HEST: Table not found.
[ 0.929470] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.929496] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.929544] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.929545] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.929546] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.929548] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.929549] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.929550] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff]
[ 0.929556] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
[ 0.929579] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[ 0.929599] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.929600] pci 0000:00:01.0: PME# disabled
[ 0.929634] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[ 0.929653] pci 0000:00:16.0: reg 10: [mem 0xfbfff000-0xfbfff00f 64bit]
[ 0.929719] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.929722] pci 0000:00:16.0: PME# disabled
[ 0.929748] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[ 0.929766] pci 0000:00:1a.0: reg 10: [mem 0xfbffe000-0xfbffe3ff]
[ 0.929846] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.929849] pci 0000:00:1a.0: PME# disabled
[ 0.929868] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[ 0.929880] pci 0000:00:1b.0: reg 10: [mem 0xfbff4000-0xfbff7fff 64bit]
[ 0.929937] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.929940] pci 0000:00:1b.0: PME# disabled
[ 0.929956] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[ 0.930024] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.930026] pci 0000:00:1c.0: PME# disabled
[ 0.930045] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[ 0.930114] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.930116] pci 0000:00:1c.1: PME# disabled
[ 0.930135] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
[ 0.930202] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.930204] pci 0000:00:1c.2: PME# disabled
[ 0.930222] pci 0000:00:1c.3: [8086:244e] type 1 class 0x000604
[ 0.930289] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.930292] pci 0000:00:1c.3: PME# disabled
[ 0.930317] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[ 0.930335] pci 0000:00:1d.0: reg 10: [mem 0xfbffd000-0xfbffd3ff]
[ 0.930414] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.930417] pci 0000:00:1d.0: PME# disabled
[ 0.930435] pci 0000:00:1f.0: [8086:1c44] type 0 class 0x000601
[ 0.930545] pci 0000:00:1f.2: [8086:2822] type 0 class 0x000104
[ 0.930560] pci 0000:00:1f.2: reg 10: [io 0xff00-0xff07]
[ 0.930566] pci 0000:00:1f.2: reg 14: [io 0xfe00-0xfe03]
[ 0.930572] pci 0000:00:1f.2: reg 18: [io 0xfd00-0xfd07]
[ 0.930578] pci 0000:00:1f.2: reg 1c: [io 0xfc00-0xfc03]
[ 0.930584] pci 0000:00:1f.2: reg 20: [io 0xfb00-0xfb1f]
[ 0.930590] pci 0000:00:1f.2: reg 24: [mem 0xfbffc000-0xfbffc7ff]
[ 0.930627] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.930629] pci 0000:00:1f.2: PME# disabled
[ 0.930641] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[ 0.930653] pci 0000:00:1f.3: reg 10: [mem 0xfbffb000-0xfbffb0ff 64bit]
[ 0.930671] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.930713] pci 0000:01:00.0: [10de:1200] type 0 class 0x000300
[ 0.930720] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf7ffffff]
[ 0.930727] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xe7ffffff 64bit pref]
[ 0.930734] pci 0000:01:00.0: reg 1c: [mem 0xec000000-0xefffffff 64bit pref]
[ 0.930739] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
[ 0.930744] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.930785] pci 0000:01:00.1: [10de:0e0c] type 0 class 0x000403
[ 0.930791] pci 0000:01:00.1: reg 10: [mem 0xf9ffc000-0xf9ffffff]
[ 0.936898] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.936899] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.936901] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf9ffffff]
[ 0.936903] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.936941] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.937006] pci 0000:03:00.0: [1b6f:7023] type 0 class 0x000c03
[ 0.937029] pci 0000:03:00.0: reg 10: [mem 0xfbef8000-0xfbefffff 64bit]
[ 0.937146] pci 0000:03:00.0: supports D1 D2
[ 0.937147] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.937151] pci 0000:03:00.0: PME# disabled
[ 0.944902] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.944907] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.944968] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[ 0.944987] pci 0000:04:00.0: reg 10: [io 0xde00-0xdeff]
[ 0.945018] pci 0000:04:00.0: reg 18: [mem 0xfbdff000-0xfbdfffff 64bit pref]
[ 0.945038] pci 0000:04:00.0: reg 20: [mem 0xfbdf8000-0xfbdfbfff 64bit pref]
[ 0.945122] pci 0000:04:00.0: supports D1 D2
[ 0.945123] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.945127] pci 0000:04:00.0: PME# disabled
[ 0.952898] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 0.952901] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.952907] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
[ 0.952967] pci 0000:05:00.0: [1283:8892] type 1 class 0x000604
[ 0.953117] pci 0000:05:00.0: supports D1 D2
[ 0.953118] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.953123] pci 0000:05:00.0: PME# disabled
[ 0.953146] pci 0000:00:1c.3: PCI bridge to [bus 05-06] (subtractive decode)
[ 0.953150] pci 0000:00:1c.3: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.953155] pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.953156] pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.953157] pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.953158] pci 0000:00:1c.3: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.953159] pci 0000:00:1c.3: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.953160] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xfebfffff] (subtractive decode)
[ 0.953243] pci 0000:06:00.0: [1814:3062] type 0 class 0x000280
[ 0.953277] pci 0000:06:00.0: reg 10: [mem 0xfbcf0000-0xfbcfffff]
[ 0.953530] pci 0000:05:00.0: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.953545] pci 0000:05:00.0: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.953556] pci 0000:05:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.953557] pci 0000:05:00.0: bridge window [mem 0xfbc00000-0xfbcfffff] (subtractive decode)
[ 0.953558] pci 0000:05:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.953559] pci 0000:05:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.953560] pci 0000:05:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.953561] pci 0000:05:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.953562] pci 0000:05:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.953563] pci 0000:05:00.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.953564] pci 0000:05:00.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.953566] pci 0000:05:00.0: bridge window [mem 0xe0000000-0xfebfffff] (subtractive decode)
[ 0.953596] pci_bus 0000:00: on NUMA node 0
[ 0.953599] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.953712] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.953732] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.953750] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.953768] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.953785] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.953819] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.953820] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.953821] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.956798] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.956821] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.956843] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.956864] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.956890] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.956912] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.956933] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.956956] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.957015] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.957017] vgaarb: loaded
[ 0.957018] vgaarb: bridge control possible 0000:01:00.0
[ 0.957066] i2c-core: driver [aat2870] using legacy suspend method
[ 0.957067] i2c-core: driver [aat2870] using legacy resume method
[ 0.957103] SCSI subsystem initialized
[ 0.957127] libata version 3.00 loaded.
[ 0.957150] usbcore: registered new interface driver usbfs
[ 0.957155] usbcore: registered new interface driver hub
[ 0.957165] usbcore: registered new device driver usb
[ 0.957203] PCI: Using ACPI for IRQ routing
[ 0.958478] PCI: pci_cache_line_size set to 64 bytes
[ 0.958532] reserve RAM buffer: 0000000000091800 - 000000000009ffff
[ 0.958534] reserve RAM buffer: 00000000df780000 - 00000000dfffffff
[ 0.958535] reserve RAM buffer: 000000041f800000 - 000000041fffffff
[ 0.958580] NetLabel: Initializing
[ 0.958581] NetLabel: domain hash size = 128
[ 0.958582] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.958587] NetLabel: unlabeled traffic allowed by default
[ 0.958611] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.958614] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.960624] Switching to clocksource hpet
[ 0.964136] AppArmor: AppArmor Filesystem Enabled
[ 0.964145] pnp: PnP ACPI init
[ 0.964151] ACPI: bus type pnp registered
[ 0.964188] pnp 00:00: [bus 00-3f]
[ 0.964190] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.964191] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.964192] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.964193] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.964194] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.964195] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.964196] pnp 00:00: [mem 0xe0000000-0xfebfffff window]
[ 0.964217] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.964255] pnp 00:01: [io 0x0010-0x001f]
[ 0.964256] pnp 00:01: [io 0x0022-0x003f]
[ 0.964257] pnp 00:01: [io 0x0044-0x004d]
[ 0.964258] pnp 00:01: [io 0x0050-0x005f]
[ 0.964259] pnp 00:01: [io 0x0062-0x0063]
[ 0.964259] pnp 00:01: [io 0x0065-0x006f]
[ 0.964260] pnp 00:01: [io 0x0074-0x007f]
[ 0.964261] pnp 00:01: [io 0x0091-0x0093]
[ 0.964262] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.964263] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.964263] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.964264] pnp 00:01: [io 0x0290-0x029f]
[ 0.964265] pnp 00:01: [io 0x0800-0x0805]
[ 0.964266] pnp 00:01: [io 0x0290-0x0294]
[ 0.964267] pnp 00:01: [io 0x0880-0x088f]
[ 0.964290] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.964291] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.964292] system 00:01: [io 0x0800-0x0805] has been reserved
[ 0.964293] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.964295] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.964296] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.964301] pnp 00:02: [dma 4]
[ 0.964302] pnp 00:02: [io 0x0000-0x000f]
[ 0.964303] pnp 00:02: [io 0x0080-0x0090]
[ 0.964304] pnp 00:02: [io 0x0094-0x009f]
[ 0.964305] pnp 00:02: [io 0x00c0-0x00df]
[ 0.964317] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.964339] pnp 00:03: [irq 0 disabled]
[ 0.964345] pnp 00:03: [irq 8]
[ 0.964346] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.964358] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.964370] pnp 00:04: [io 0x0070-0x0073]
[ 0.964383] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.964387] pnp 00:05: [io 0x0061]
[ 0.964399] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.964403] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.964407] pnp 00:06: [irq 13]
[ 0.964419] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.964550] pnp 00:07: [io 0x03f8-0x03ff]
[ 0.964553] pnp 00:07: [irq 4]
[ 0.964581] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.964678] pnp 00:08: [io 0x0378-0x037f]
[ 0.964681] pnp 00:08: [irq 7]
[ 0.964702] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.964768] pnp 00:09: [io 0x0400-0x04cf]
[ 0.964769] pnp 00:09: [io 0x04d2-0x04ff]
[ 0.964790] system 00:09: [io 0x0400-0x04cf] has been reserved
[ 0.964791] system 00:09: [io 0x04d2-0x04ff] has been reserved
[ 0.964793] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.964798] pnp 00:0a: [io 0x1000-0x107f]
[ 0.964799] pnp 00:0a: [io 0x1080-0x10ff]
[ 0.964800] pnp 00:0a: [io 0x1100-0x117f]
[ 0.964801] pnp 00:0a: [io 0x1180-0x11ff]
[ 0.964821] system 00:0a: [io 0x1000-0x107f] has been reserved
[ 0.964822] system 00:0a: [io 0x1080-0x10ff] has been reserved
[ 0.964823] system 00:0a: [io 0x1100-0x117f] has been reserved
[ 0.964824] system 00:0a: [io 0x1180-0x11ff] has been reserved
[ 0.964825] system 00:0a: Plug and Play ACPI device, IDs ICD0001 PNP0c02 (active)
[ 0.964909] pnp 00:0b: [io 0x0454-0x0457]
[ 0.964933] system 00:0b: [io 0x0454-0x0457] has been reserved
[ 0.964935] system 00:0b: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.964942] pnp 00:0c: [mem 0xf0000000-0xf3ffffff]
[ 0.964968] system 00:0c: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.964969] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.965053] pnp 00:0d: [mem 0x000db800-0x000dbfff]
[ 0.965054] pnp 00:0d: [mem 0x000f0000-0x000f7fff]
[ 0.965055] pnp 00:0d: [mem 0x000f8000-0x000fbfff]
[ 0.965056] pnp 00:0d: [mem 0x000fc000-0x000fffff]
[ 0.965057] pnp 00:0d: [mem 0xdf780000-0xdf7dffff]
[ 0.965058] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[ 0.965059] pnp 00:0d: [mem 0x00100000-0xdf77ffff]
[ 0.965060] pnp 00:0d: [mem 0xdf7e0000-0xdf7fffff]
[ 0.965061] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[ 0.965061] pnp 00:0d: [mem 0xfed10000-0xfed1dfff]
[ 0.965062] pnp 00:0d: [mem 0xfed20000-0xfed8ffff]
[ 0.965063] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[ 0.965064] pnp 00:0d: [mem 0xffb00000-0xffb7ffff]
[ 0.965065] pnp 00:0d: [mem 0xfff00000-0xffffffff]
[ 0.965066] pnp 00:0d: [mem 0x000e0000-0x000effff]
[ 0.965067] pnp 00:0d: [mem 0x20000000-0x201fffff]
[ 0.965068] pnp 00:0d: [mem 0x40000000-0x400fffff]
[ 0.965069] pnp 00:0d: [mem 0xdf800000-0xdfffffff]
[ 0.965099] system 00:0d: [mem 0x000db800-0x000dbfff] has been reserved
[ 0.965100] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.965102] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.965103] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.965104] system 00:0d: [mem 0xdf780000-0xdf7dffff] could not be reserved
[ 0.965105] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.965106] system 00:0d: [mem 0x00100000-0xdf77ffff] could not be reserved
[ 0.965107] system 00:0d: [mem 0xdf7e0000-0xdf7fffff] has been reserved
[ 0.965109] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.965110] system 00:0d: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.965111] system 00:0d: [mem 0xfed20000-0xfed8ffff] could not be reserved
[ 0.965112] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.965113] system 00:0d: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.965114] system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.965116] system 00:0d: [mem 0x000e0000-0x000effff] has been reserved
[ 0.965117] system 00:0d: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.965118] system 00:0d: [mem 0x40000000-0x400fffff] could not be reserved
[ 0.965119] system 00:0d: [mem 0xdf800000-0xdfffffff] could not be reserved
[ 0.965120] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.965128] pnp 00:0e: [mem 0xffb80000-0xffbfffff]
[ 0.965146] pnp 00:0e: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.965149] pnp: PnP ACPI: found 15 devices
[ 0.965149] ACPI: ACPI bus type pnp unregistered
[ 0.965151] PnPBIOS: Disabled by ACPI PNP
[ 1.000770] PCI: max bus depth: 2 pci_try_num: 3
[ 1.000820] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf4000000-0xf41fffff]
[ 1.000822] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4200000-0xf43fffff 64bit pref]
[ 1.000824] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 1.000826] pci 0000:01:00.0: BAR 6: assigned [mem 0xe8000000-0xe807ffff pref]
[ 1.000827] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.000828] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 1.000830] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf9ffffff]
[ 1.000832] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.000834] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.000836] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 1.000839] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf41fffff]
[ 1.000842] pci 0000:00:1c.0: bridge window [mem 0xf4200000-0xf43fffff 64bit pref]
[ 1.000847] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.000850] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.000857] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 1.000859] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 1.000864] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
[ 1.000869] pci 0000:05:00.0: PCI bridge to [bus 06-06]
[ 1.000877] pci 0000:05:00.0: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.000892] pci 0000:00:1c.3: PCI bridge to [bus 05-06]
[ 1.000895] pci 0000:00:1c.3: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.000911] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.000913] pci 0000:00:01.0: setting latency timer to 64
[ 1.000916] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 1.000918] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.000922] pci 0000:00:1c.0: setting latency timer to 64
[ 1.000928] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.000930] pci 0000:00:1c.1: setting latency timer to 64
[ 1.000936] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.000939] pci 0000:00:1c.2: setting latency timer to 64
[ 1.000945] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.000947] pci 0000:00:1c.3: setting latency timer to 64
[ 1.000954] pci 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.000960] pci 0000:05:00.0: setting latency timer to 64
[ 1.000963] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.000964] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.000965] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.000966] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 1.000968] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 1.000969] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xfebfffff]
[ 1.000970] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 1.000971] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf9ffffff]
[ 1.000972] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.000973] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 1.000974] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf41fffff]
[ 1.000975] pci_bus 0000:02: resource 2 [mem 0xf4200000-0xf43fffff 64bit pref]
[ 1.000976] pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 1.000977] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 1.000978] pci_bus 0000:04: resource 2 [mem 0xfbd00000-0xfbdfffff 64bit pref]
[ 1.000979] pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 1.000980] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 1.000981] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 1.000982] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.000983] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[ 1.000984] pci_bus 0000:05: resource 8 [mem 0xfed40000-0xfed44fff]
[ 1.000985] pci_bus 0000:05: resource 9 [mem 0xe0000000-0xfebfffff]
[ 1.000986] pci_bus 0000:06: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 1.000987] pci_bus 0000:06: resource 5 [mem 0xfbc00000-0xfbcfffff]
[ 1.000988] pci_bus 0000:06: resource 8 [io 0x0000-0x0cf7]
[ 1.000989] pci_bus 0000:06: resource 9 [io 0x0d00-0xffff]
[ 1.000990] pci_bus 0000:06: resource 10 [mem 0x000a0000-0x000bffff]
[ 1.000991] pci_bus 0000:06: resource 11 [mem 0x000c0000-0x000dffff]
[ 1.000992] pci_bus 0000:06: resource 12 [mem 0xfed40000-0xfed44fff]
[ 1.000993] pci_bus 0000:06: resource 13 [mem 0xe0000000-0xfebfffff]
[ 1.001011] NET: Registered protocol family 2
[ 1.001040] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.001112] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.001225] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.001274] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.001275] TCP reno registered
[ 1.001276] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.001278] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.001306] NET: Registered protocol family 1
[ 1.001317] pci 0000:00:1a.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.016721] pci 0000:00:1a.0: PCI INT C disabled
[ 1.016737] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.032719] pci 0000:00:1d.0: PCI INT A disabled
[ 1.032734] pci 0000:01:00.0: Boot video device
[ 1.032745] pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.032767] pci 0000:03:00.0: PCI INT A disabled
[ 1.032778] PCI: CLS 4 bytes, default 64
[ 1.033123] audit: initializing netlink socket (disabled)
[ 1.033127] type=2000 audit(1346279421.808:1): initialized
[ 1.051014] highmem bounce pool size: 64 pages
[ 1.051016] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.065428] VFS: Disk quotas dquot_6.5.2
[ 1.065461] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.065708] fuse init (API version 7.17)
[ 1.065751] msgmni has been set to 1337
[ 1.065930] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.065944] io scheduler noop registered
[ 1.065945] io scheduler deadline registered
[ 1.065948] io scheduler cfq registered (default)
[ 1.065997] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.066012] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.066151] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.066162] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.066202] intel_idle: MWAIT substates: 0x1120
[ 1.066203] intel_idle: v0.4 model 0x2A
[ 1.066203] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.066254] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.066256] ACPI: Power Button [PWRB]
[ 1.066279] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.066281] ACPI: Power Button [PWRF]
[ 1.069960] ERST: Table is not found!
[ 1.069962] GHES: HEST is not enabled!
[ 1.069997] isapnp: Scanning for PnP cards...
[ 1.090387] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.090401] Freeing initrd memory: 13828k freed
[ 1.425076] isapnp: No Plug & Play device found
[ 1.465262] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.508787] Linux agpgart interface v0.103
[ 1.509550] brd: module loaded
[ 1.509906] loop: module loaded
[ 1.509967] ahci 0000:00:1f.2: version 3.0
[ 1.509974] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.510000] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.510007] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
[ 1.510021] ahci: SSS flag set, parallel bus scan disabled
[ 1.524671] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl RAID mode
[ 1.524673] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pmp pio slum part ems apst
[ 1.524676] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.564870] scsi0 : ahci
[ 1.564909] scsi1 : ahci
[ 1.564941] scsi2 : ahci
[ 1.564973] scsi3 : ahci
[ 1.565004] scsi4 : ahci
[ 1.565035] scsi5 : ahci
[ 1.565104] ata1: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 41
[ 1.565106] ata2: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 41
[ 1.565107] ata3: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc200 irq 41
[ 1.565109] ata4: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc280 irq 41
[ 1.565110] ata5: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc300 irq 41
[ 1.565112] ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 41
[ 1.565285] Fixed MDIO Bus: probed
[ 1.565294] tun: Universal TUN/TAP device driver, 1.6
[ 1.565294] tun: (C) 1999-2004 Max Krasnyansky
[ 1.565316] PPP generic driver version 2.4.2
[ 1.565359] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.565368] ehci_hcd 0000:00:1a.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.565375] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.565377] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.565397] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.565413] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.569298] ehci_hcd 0000:00:1a.0: cache line size of 4 is not supported
[ 1.569307] ehci_hcd 0000:00:1a.0: irq 18, io mem 0xfbffe000
[ 1.584639] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.584700] hub 1-0:1.0: USB hub found
[ 1.584702] hub 1-0:1.0: 2 ports detected
[ 1.584733] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.584740] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.584742] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.584763] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.584777] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.588675] ehci_hcd 0000:00:1d.0: cache line size of 4 is not supported
[ 1.588683] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbffd000
[ 1.600637] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.600685] hub 2-0:1.0: USB hub found
[ 1.600687] hub 2-0:1.0: 2 ports detected
[ 1.600715] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.600720] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.600736] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.600746] xhci_hcd 0000:03:00.0: setting latency timer to 64
[ 1.600749] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.600769] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[ 1.600879] xhci_hcd 0000:03:00.0: irq 17, io mem 0xfbef8000
[ 1.600943] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[ 1.601020] xHCI xhci_add_endpoint called for root hub
[ 1.601021] xHCI xhci_check_bandwidth called for root hub
[ 1.601033] hub 3-0:1.0: USB hub found
[ 1.601038] hub 3-0:1.0: 2 ports detected
[ 1.601068] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.601087] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[ 1.601131] xHCI xhci_add_endpoint called for root hub
[ 1.601131] xHCI xhci_check_bandwidth called for root hub
[ 1.601142] hub 4-0:1.0: USB hub found
[ 1.601147] hub 4-0:1.0: 2 ports detected
[ 1.652642] usbcore: registered new interface driver libusual
[ 1.652666] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.685830] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 1.685831] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 1.896598] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.936671] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.936710] mousedev: PS/2 mouse device common for all mice
[ 1.936794] rtc_cmos 00:04: RTC can wake from S4
[ 1.936872] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.936896] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.936924] device-mapper: uevent: version 1.0.3
[ 1.936957] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.936972] EISA: Probing bus 0 at eisa.0
[ 1.936973] EISA: Cannot allocate resource for mainboard
[ 1.936974] Cannot allocate resource for EISA slot 1
[ 1.936975] Cannot allocate resource for EISA slot 2
[ 1.936976] Cannot allocate resource for EISA slot 3
[ 1.936976] Cannot allocate resource for EISA slot 4
[ 1.936977] Cannot allocate resource for EISA slot 5
[ 1.936978] Cannot allocate resource for EISA slot 6
[ 1.936979] Cannot allocate resource for EISA slot 7
[ 1.936979] Cannot allocate resource for EISA slot 8
[ 1.936980] EISA: Detected 0 cards.
[ 1.936984] cpufreq-nforce2: No nForce2 chipset.
[ 1.937081] cpuidle: using governor ladder
[ 1.937244] cpuidle: using governor menu
[ 1.937245] EFI Variables Facility v0.08 2004-May-17
[ 1.937333] TCP cubic registered
[ 1.937386] NET: Registered protocol family 10
[ 1.937588] NET: Registered protocol family 17
[ 1.937590] Registering the dns_resolver key type
[ 1.937601] Using IPI No-Shortcut mode
[ 1.937661] PM: Hibernation image not present or could not be loaded.
[ 1.937667] registered taskstats version 1
[ 1.948326] Magic number: 8:6:554
[ 1.948327] hash matches /build/buildd/linux-3.2.0/drivers/base/power/main.c:600
[ 1.948351] acpi PNP0C01:00: hash matches
[ 1.948352] pci_link PNP0C0F:05: hash matches
[ 1.948410] rtc_cmos 00:04: setting system clock to 2012-08-29 22:30:23 UTC (1346279423)
[ 1.949491] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.949492] EDD information not available.
[ 2.029255] hub 1-1:1.0: USB hub found
[ 2.029343] hub 1-1:1.0: 6 ports detected
[ 2.032589] Refined TSC clocksource calibration: 3494.437 MHz.
[ 2.032592] Switching to clocksource tsc
[ 2.056610] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.056900] ata1.00: ATA-8: PLEXTOR PX-128M3, 1.01, max UDMA/133
[ 2.056905] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.057180] ata1.00: configured for UDMA/133
[ 2.057272] scsi 0:0:0:0: Direct-Access ATA PLEXTOR PX-128M3 1.01 PQ: 0 ANSI: 5
[ 2.057392] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.057408] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 2.057696] sd 0:0:0:0: [sda] Write Protect is off
[ 2.057701] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.057760] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.058309] sda: sda1 sda2
[ 2.058680] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.140571] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 2.273226] hub 2-1:1.0: USB hub found
[ 2.273298] hub 2-1:1.0: 8 ports detected
[ 2.384576] usb 3-2: new full-speed USB device number 2 using xhci_hcd
[ 2.552541] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.552902] ata2.00: ATA-8: INTEL SSDSA2CW120G3, 4PC10362, max UDMA/133
[ 2.552904] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.553295] ata2.00: configured for UDMA/133
[ 2.553409] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSA2CW12 4PC1 PQ: 0 ANSI: 5
[ 2.553525] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.553546] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.553819] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.553821] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.553884] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.554927] sdb: sdb1 sdb2 < sdb5 >
[ 2.555497] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.584666] usb 1-1.5: new full-speed USB device number 3 using ehci_hcd
[ 2.748645] usb 1-1.6: new high-speed USB device number 4 using ehci_hcd
[ 2.841147] hub 1-1.6:1.0: USB hub found
[ 2.841236] hub 1-1.6:1.0: 3 ports detected
[ 2.912604] usb 2-1.1: new high-speed USB device number 3 using ehci_hcd
[ 3.008559] Initializing USB Mass Storage driver...
[ 3.008801] scsi6 : usb-storage 2-1.1:1.0
[ 3.008874] usbcore: registered new interface driver usb-storage
[ 3.008875] USB Mass Storage support registered.
[ 3.044482] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.047693] ata3.00: ATAPI: HL-DT-ST DVDRAM GH24NS70, GN00, max UDMA/100
[ 3.052017] ata3.00: configured for UDMA/100
[ 3.060492] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NS70 GN00 PQ: 0 ANSI: 5
[ 3.069005] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.069015] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.069111] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 3.069223] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 3.076577] usb 2-1.5: new full-speed USB device number 4 using ehci_hcd
[ 3.244581] usb 2-1.6: new full-speed USB device number 5 using ehci_hcd
[ 3.428536] usb 1-1.6.1: new high-speed USB device number 5 using ehci_hcd
[ 3.560413] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.564177] ata4.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
[ 3.564179] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.568179] ata4.00: configured for UDMA/133
[ 3.568276] scsi 3:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
[ 3.568332] sd 3:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 3.568333] sd 3:0:0:0: [sdc] 4096-byte physical blocks
[ 3.568349] sd 3:0:0:0: [sdc] Write Protect is off
[ 3.568350] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 3.568352] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.568359] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.623317] sdc: sdc1 sdc2
[ 3.623580] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 3.624501] usb 1-1.6.2: new full-speed USB device number 6 using ehci_hcd
[ 3.888382] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.009110] scsi 6:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
[ 4.009729] scsi 6:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
[ 4.010344] scsi 6:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
[ 4.010962] scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS
[ 4.011379] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 4.011588] sd 6:0:0:1: Attached scsi generic sg5 type 0
[ 4.011775] sd 6:0:0:2: Attached scsi generic sg6 type 0
[ 4.011956] sd 6:0:0:3: Attached scsi generic sg7 type 0
[ 4.014830] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 4.017809] sd 6:0:0:1: [sde] Attached SCSI removable disk
[ 4.018560] sd 6:0:0:3: [sdg] Attached SCSI removable disk
[ 4.020052] sd 6:0:0:2: [sdf] Attached SCSI removable disk
[ 4.208341] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.208499] Freeing unused kernel memory: 740k freed
[ 4.208637] Write protecting the kernel text: 5816k
[ 4.208686] Write protecting the kernel read-only data: 2376k
[ 4.208687] NX-protecting the kernel data: 4424k
[ 4.217199] udevd[135]: starting version 175
[ 4.231884] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.231898] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.231936] r8169 0000:04:00.0: setting latency timer to 64
[ 4.232022] r8169 0000:04:00.0: irq 43 for MSI/MSI-X
[ 4.232361] r8169 0000:04:00.0: eth0: RTL8168evl/8111evl at 0xf8444000, 50:e5:49:e8:2b:ee, XID 0c900800 IRQ 43
[ 4.232363] r8169 0000:04:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 4.253799] input: Logitech Logitech Wireless Headset as /devices/pci0000:00/0000:00:1c.1/0000:03:00.0/usb3/3-2/3-2:1.3/input/input2
[ 4.253927] generic-usb 0003:046D:0A29.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Logitech Logitech Wireless Headset] on usb-0000:03:00.0-2/input3
[ 4.258670] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.267227] generic-usb 0003:051D:0002.0002: hiddev0,hidraw1: USB HID v1.00 Device [American Power Conversion Back-UPS BX1500G FW:866.L5 .D USB FW:L5 ] on usb-0000:00:1a.0-1.5/input0
[ 4.268442] generic-usb 0003:058F:6364.0003: hiddev0,hidraw2: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:1d.0-1.1/input1
[ 4.270400] input: Logitech Logitech G35 Headset as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.3/input/input3
[ 4.270468] generic-usb 0003:046D:0A15.0007: input,hidraw3: USB HID v1.00 Device [Logitech Logitech G35 Headset] on usb-0000:00:1d.0-1.6/input3
[ 4.270477] usbcore: registered new interface driver usbhid
[ 4.270478] usbhid: USB HID core driver
[ 4.825558] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.827569] udevd[503]: starting version 175
[ 4.829450] Adding 19562492k swap on /dev/sdb5. Priority:-1 extents:1 across:19562492k SS
[ 4.837258] lp: driver loaded but no devices found
[ 4.907679] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.907859] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.907863] mei 0000:00:16.0: setting latency timer to 64
[ 4.907906] mei 0000:00:16.0: irq 44 for MSI/MSI-X
[ 4.911567] parport_pc 00:08: reported by Plug and Play ACPI
[ 4.911613] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 4.918660] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 4.918699] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 4.918718] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 4.921434] type=1400 audit(1346297426.470:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=605 comm="apparmor_parser"
[ 4.921704] type=1400 audit(1346297426.470:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=605 comm="apparmor_parser"
[ 4.921714] cfg80211: Calling CRDA to update world regulatory domain
[ 4.921867] type=1400 audit(1346297426.470:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=605 comm="apparmor_parser"
[ 4.926291] rt2800pci 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.926977] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5/input2
[ 4.928522] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 4.928524] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 4.928526] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 4.928527] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 4.928529] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 4.928531] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 4.928532] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 4.928534] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 4.928535] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 4.928537] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 4.928538] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 4.928540] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 4.928541] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 4.928543] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 4.928544] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 4.928546] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 4.928547] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 4.928549] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 4.928551] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 4.928553] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 4.928554] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 4.928556] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 4.928557] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 4.928559] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[ 4.928560] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 4.928562] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[ 4.928563] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 4.928565] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[ 4.929839] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.930123] input: Logitech Unifying Device. Wireless PID:2010 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2/0003:046D:C52B.0006/input/input4
[ 4.930166] Registered led device: rt2800pci-phy0::radio
[ 4.930184] logitech-djdevice 0003:046D:C52B.0008: input,hidraw5: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2010] on usb-0000:00:1d.0-1.5:1
[ 4.930185] Registered led device: rt2800pci-phy0::assoc
[ 4.930196] Registered led device: rt2800pci-phy0::quality
[ 4.932139] input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2/0003:046D:C52B.0006/input/input5
[ 4.932241] logitech-djdevice 0003:046D:C52B.0009: input,hidraw6: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:1d.0-1.5:2
[ 4.934641] 2:1:1 : no or invalid class specific endpoint descriptor
[ 4.936686] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 4.936689] usb 3-2: Not enough bandwidth for altsetting 0
[ 4.936694] 2:2:1 : no or invalid class specific endpoint descriptor
[ 4.936725] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 4.936728] usb 3-2: Not enough bandwidth for altsetting 1
[ 4.950089] Linux video capture interface: v2.00
[ 4.954645] ppdev: user-space parallel port driver
[ 4.956603] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 4.956605] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.956607] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 4.956609] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.956610] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 4.956612] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.956614] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 4.956615] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.956617] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 4.956619] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.956620] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 4.956622] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.956623] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 4.956625] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.956627] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 4.956628] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.956630] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 4.956632] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.956633] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 4.956635] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.956636] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 4.956638] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.956640] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 4.956642] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4.956643] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 4.956645] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4.956646] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 4.956648] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4.956650] cfg80211: World regulatory domain updated:
[ 4.956651] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4.956653] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.956655] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4.956656] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4.956658] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.956660] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.958668] hda_codec: ALC889: BIOS auto-probing.
[ 4.965403] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 4.965460] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 4.965511] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.965559] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.965953] input: HDA Intel PCH Line-Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.966142] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.966144] hda_intel: Disabling MSI
[ 4.966168] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 4.992092] nvidia: module license 'NVIDIA' taints kernel.
[ 4.992094] Disabling lock debugging due to kernel taint
[ 5.001395] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ 5.004296] lp0: using parport0 (interrupt-driven).
[ 5.051449] init: failsafe main process (888) killed by TERM signal
[ 5.066748] type=1400 audit(1346297426.614:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=941 comm="apparmor_parser"
[ 5.066908] type=1400 audit(1346297426.614:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=942 comm="apparmor_parser"
[ 5.067004] type=1400 audit(1346297426.614:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=945 comm="apparmor_parser"
[ 5.067194] type=1400 audit(1346297426.614:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=942 comm="apparmor_parser"
[ 5.067250] type=1400 audit(1346297426.614:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=945 comm="apparmor_parser"
[ 5.067355] type=1400 audit(1346297426.614:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=942 comm="apparmor_parser"
[ 5.080271] Bluetooth: Core ver 2.16
[ 5.080280] NET: Registered protocol family 31
[ 5.080281] Bluetooth: HCI device and connection manager initialized
[ 5.080282] Bluetooth: HCI socket layer initialized
[ 5.080283] Bluetooth: L2CAP socket layer initialized
[ 5.080285] Bluetooth: SCO socket layer initialized
[ 5.081152] Bluetooth: RFCOMM TTY layer initialized
[ 5.081155] Bluetooth: RFCOMM socket layer initialized
[ 5.081156] Bluetooth: RFCOMM ver 1.11
[ 5.115802] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.115804] Bluetooth: BNEP filters: protocol multicast
[ 5.265131] r8169 0000:04:00.0: eth0: link down
[ 5.265220] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.265413] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.408379] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5.408620] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5.780107] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 5.804104] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 5.828101] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 5.852098] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 5.852151] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card4/input11
[ 5.852256] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card4/input12
[ 5.852356] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card4/input13
[ 5.852456] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card4/input14
[ 5.852895] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.852901] nvidia 0000:01:00.0: setting latency timer to 64
[ 5.852904] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.852970] NVRM: loading NVIDIA UNIX x86 Kernel Module 304.43 Sun Aug 19 20:20:21 PDT 2012
[ 6.064167] 5:3:1: cannot get freq at ep 0x82
[ 6.065985] usbcore: registered new interface driver snd-usb-audio
[ 6.066007] uvcvideo: Found UVC 1.00 device Microsoft\xffffffc2\xffffffae\xffffffae LifeCam Cinema(TM) (045e:075d)
[ 6.070391] input: Microsoft\xffffffc2\xffffffae\xffffffae LifeCam Cinema(TM) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.0/input/input15
[ 6.070453] usbcore: registered new interface driver uvcvideo
[ 6.070454] USB Video Class driver (1.1.1)
[ 6.311109] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 6.311111] vesafb: scrolling: redraw
[ 6.311113] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 6.314889] vesafb: framebuffer at 0xed000000, mapped to 0xf8c80000, using 1216k, total 1216k
[ 6.314965] Console: switching to colour frame buffer device 80x30
[ 6.314974] fb0: VESA VGA frame buffer device
[ 6.327084] init: plymouth-splash main process (1306) terminated with status 1
[ 7.310316] NVRM: GPU at 0000:01:00: GPU-7957c6bb-e0e5-6422-2cc0-93223c4ca21b
[ 7.310319] NVRM: Your system is not currently configured to drive a VGA console
[ 7.310320] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 7.310321] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 7.310322] NVRM: drivers including, but not limited to, vesafb, may result in
[ 7.310323] NVRM: corruption and stability problems, and is not supported.
[ 9.803653] 5:3:1: cannot get freq at ep 0x82
[ 10.927685] 5:3:1: cannot get freq at ep 0x82
[ 11.120221] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.120225] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.120226] 2:2:1: usb_set_interface failed
[ 11.120258] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.120260] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.120261] 2:2:1: usb_set_interface failed
[ 11.120298] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.120300] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.120301] 2:2:1: usb_set_interface failed
[ 11.120425] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.120426] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.120427] 2:2:1: usb_set_interface failed
[ 11.120541] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.120543] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.120544] 2:2:1: usb_set_interface failed
[ 11.120718] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.120720] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.120721] 2:2:1: usb_set_interface failed
[ 11.120758] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.120759] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.120760] 2:2:1: usb_set_interface failed
[ 11.120798] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.120799] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.120800] 2:2:1: usb_set_interface failed
[ 11.120899] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.120900] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.120901] 2:2:1: usb_set_interface failed
[ 11.121005] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.121007] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.121008] 2:2:1: usb_set_interface failed
[ 11.121219] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.121221] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.121222] 2:2:1: usb_set_interface failed
[ 11.121257] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.121259] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.121260] 2:2:1: usb_set_interface failed
[ 11.121311] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.121313] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.121314] 2:2:1: usb_set_interface failed
[ 11.121428] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.121429] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.121430] 2:2:1: usb_set_interface failed
[ 11.121555] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.121557] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.121558] 2:2:1: usb_set_interface failed
[ 11.121853] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.121855] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.121856] 2:2:1: usb_set_interface failed
[ 11.121892] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.121893] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.121894] 2:2:1: usb_set_interface failed
[ 11.121948] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.121950] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.121950] 2:2:1: usb_set_interface failed
[ 11.122071] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.122072] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.122073] 2:2:1: usb_set_interface failed
[ 11.122201] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.122203] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.122203] 2:2:1: usb_set_interface failed
[ 11.122312] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.122314] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.122314] 2:2:1: usb_set_interface failed
[ 11.122352] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.122353] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.122354] 2:2:1: usb_set_interface failed
[ 11.122392] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.122394] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.122394] 2:2:1: usb_set_interface failed
[ 11.122488] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.122489] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.122490] 2:2:1: usb_set_interface failed
[ 11.122594] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.122596] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.122597] 2:2:1: usb_set_interface failed
[ 11.122699] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.122700] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.122701] 2:2:1: usb_set_interface failed
[ 11.122738] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.122740] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.122741] 2:2:1: usb_set_interface failed
[ 11.122779] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.122780] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.122781] 2:2:1: usb_set_interface failed
[ 11.122880] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.122882] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.122883] 2:2:1: usb_set_interface failed
[ 11.122987] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.122988] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.122989] 2:2:1: usb_set_interface failed
[ 11.123129] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.123131] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.123132] 2:2:1: usb_set_interface failed
[ 11.123169] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.123170] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.123171] 2:2:1: usb_set_interface failed
[ 11.123221] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.123222] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.123223] 2:2:1: usb_set_interface failed
[ 11.123337] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.123339] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.123340] 2:2:1: usb_set_interface failed
[ 11.123470] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.123472] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.123474] 2:2:1: usb_set_interface failed
[ 11.123694] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.123696] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.123697] 2:2:1: usb_set_interface failed
[ 11.123733] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.123735] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.123736] 2:2:1: usb_set_interface failed
[ 11.123789] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.123791] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.123791] 2:2:1: usb_set_interface failed
[ 11.123914] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.123916] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.123917] 2:2:1: usb_set_interface failed
[ 11.124044] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.124046] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.124046] 2:2:1: usb_set_interface failed
[ 11.124226] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.124228] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.124229] 2:2:1: usb_set_interface failed
[ 11.124266] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.124267] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.124268] 2:2:1: usb_set_interface failed
[ 11.124306] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.124308] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.124308] 2:2:1: usb_set_interface failed
[ 11.124402] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.124404] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.124405] 2:2:1: usb_set_interface failed
[ 11.124508] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.124510] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.124511] 2:2:1: usb_set_interface failed
[ 11.124683] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.124685] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.124686] 2:2:1: usb_set_interface failed
[ 11.124722] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.124724] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.124725] 2:2:1: usb_set_interface failed
[ 11.124763] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.124764] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.124765] 2:2:1: usb_set_interface failed
[ 11.124864] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.124865] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.124866] 2:2:1: usb_set_interface failed
[ 11.124970] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.124972] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.124973] 2:2:1: usb_set_interface failed
[ 11.125185] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.125186] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.125187] 2:2:1: usb_set_interface failed
[ 11.125223] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.125225] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.125226] 2:2:1: usb_set_interface failed
[ 11.125277] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.125278] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.125279] 2:2:1: usb_set_interface failed
[ 11.125393] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.125395] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.125396] 2:2:1: usb_set_interface failed
[ 11.125520] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.125522] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.125523] 2:2:1: usb_set_interface failed
[ 11.125812] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.125814] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.125815] 2:2:1: usb_set_interface failed
[ 11.125852] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.125854] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.125855] 2:2:1: usb_set_interface failed
[ 11.125909] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.125911] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.125912] 2:2:1: usb_set_interface failed
[ 11.126028] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.126029] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.126030] 2:2:1: usb_set_interface failed
[ 11.126157] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.126159] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.126160] 2:2:1: usb_set_interface failed
[ 11.126269] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.126271] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.126272] 2:2:1: usb_set_interface failed
[ 11.126308] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.126310] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.126311] 2:2:1: usb_set_interface failed
[ 11.126349] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.126350] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.126351] 2:2:1: usb_set_interface failed
[ 11.126444] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.126446] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.126447] 2:2:1: usb_set_interface failed
[ 11.126551] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.126553] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.126554] 2:2:1: usb_set_interface failed
[ 11.126657] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.126659] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.126660] 2:2:1: usb_set_interface failed
[ 11.126696] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.126698] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.126698] 2:2:1: usb_set_interface failed
[ 11.126736] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.126738] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.126739] 2:2:1: usb_set_interface failed
[ 11.126837] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.126839] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.126840] 2:2:1: usb_set_interface failed
[ 11.126944] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.126945] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.126946] 2:2:1: usb_set_interface failed
[ 11.127104] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.127106] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.127107] 2:2:1: usb_set_interface failed
[ 11.127143] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.127145] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.127145] 2:2:1: usb_set_interface failed
[ 11.127196] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.127197] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.127198] 2:2:1: usb_set_interface failed
[ 11.127312] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.127313] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.127314] 2:2:1: usb_set_interface failed
[ 11.127461] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.127464] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.127465] 2:2:1: usb_set_interface failed
[ 11.127688] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.127690] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.127690] 2:2:1: usb_set_interface failed
[ 11.127726] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.127728] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.127729] 2:2:1: usb_set_interface failed
[ 11.127782] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.127784] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.127785] 2:2:1: usb_set_interface failed
[ 11.127907] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.127909] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.127910] 2:2:1: usb_set_interface failed
[ 11.128038] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.128039] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.128040] 2:2:1: usb_set_interface failed
[ 11.128220] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.128222] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.128223] 2:2:1: usb_set_interface failed
[ 11.128259] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.128260] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.128261] 2:2:1: usb_set_interface failed
[ 11.128299] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.128301] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.128302] 2:2:1: usb_set_interface failed
[ 11.128395] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.128396] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.128397] 2:2:1: usb_set_interface failed
[ 11.128501] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.128503] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.128504] 2:2:1: usb_set_interface failed
[ 11.128675] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.128677] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.128678] 2:2:1: usb_set_interface failed
[ 11.128714] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.128716] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.128717] 2:2:1: usb_set_interface failed
[ 11.128755] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.128756] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.128757] 2:2:1: usb_set_interface failed
[ 11.128857] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.128858] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.128859] 2:2:1: usb_set_interface failed
[ 11.128963] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.128965] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.128966] 2:2:1: usb_set_interface failed
[ 11.129174] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.129176] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.129177] 2:2:1: usb_set_interface failed
[ 11.129213] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.129215] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.129216] 2:2:1: usb_set_interface failed
[ 11.129266] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.129267] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.129268] 2:2:1: usb_set_interface failed
[ 11.129382] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.129383] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.129384] 2:2:1: usb_set_interface failed
[ 11.129509] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.129510] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.129511] 2:2:1: usb_set_interface failed
[ 11.129799] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.129801] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.129802] 2:2:1: usb_set_interface failed
[ 11.129838] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.129840] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.129840] 2:2:1: usb_set_interface failed
[ 11.129895] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.129896] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.129897] 2:2:1: usb_set_interface failed
[ 11.130014] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.130015] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.130016] 2:2:1: usb_set_interface failed
[ 11.130143] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.130145] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.130146] 2:2:1: usb_set_interface failed
[ 11.130256] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.130258] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.130259] 2:2:1: usb_set_interface failed
[ 11.130295] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.130297] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.130298] 2:2:1: usb_set_interface failed
[ 11.130335] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.130337] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.130338] 2:2:1: usb_set_interface failed
[ 11.130431] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.130432] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.130433] 2:2:1: usb_set_interface failed
[ 11.130537] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.130539] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.130540] 2:2:1: usb_set_interface failed
[ 11.130641] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.130643] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.130644] 2:2:1: usb_set_interface failed
[ 11.130680] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.130682] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.130683] 2:2:1: usb_set_interface failed
[ 11.130720] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.130722] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.130723] 2:2:1: usb_set_interface failed
[ 11.130815] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.130817] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.130818] 2:2:1: usb_set_interface failed
[ 11.130927] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.130929] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.130930] 2:2:1: usb_set_interface failed
[ 11.131070] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.131072] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.131073] 2:2:1: usb_set_interface failed
[ 11.131109] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.131111] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.131112] 2:2:1: usb_set_interface failed
[ 11.131162] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.131164] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.131164] 2:2:1: usb_set_interface failed
[ 11.131277] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.131279] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.131280] 2:2:1: usb_set_interface failed
[ 11.131404] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.131405] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.131406] 2:2:1: usb_set_interface failed
[ 11.131631] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.131633] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.131634] 2:2:1: usb_set_interface failed
[ 11.131670] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.131673] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.131674] 2:2:1: usb_set_interface failed
[ 11.131728] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.131730] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.131731] 2:2:1: usb_set_interface failed
[ 11.131853] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.131854] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.131855] 2:2:1: usb_set_interface failed
[ 11.131982] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.131984] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.131985] 2:2:1: usb_set_interface failed
[ 11.132161] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.132163] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.132163] 2:2:1: usb_set_interface failed
[ 11.132199] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.132201] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.132202] 2:2:1: usb_set_interface failed
[ 11.132240] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.132241] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.132242] 2:2:1: usb_set_interface failed
[ 11.132335] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.132337] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.132337] 2:2:1: usb_set_interface failed
[ 11.132441] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.132443] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.132444] 2:2:1: usb_set_interface failed
[ 11.132613] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.132615] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.132616] 2:2:1: usb_set_interface failed
[ 11.132652] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.132654] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.132654] 2:2:1: usb_set_interface failed
[ 11.132693] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.132694] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.132695] 2:2:1: usb_set_interface failed
[ 11.132787] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.132789] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.132790] 2:2:1: usb_set_interface failed
[ 11.132900] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.132902] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.132903] 2:2:1: usb_set_interface failed
[ 11.133112] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.133114] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.133115] 2:2:1: usb_set_interface failed
[ 11.133151] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.133153] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.133154] 2:2:1: usb_set_interface failed
[ 11.133204] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.133205] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.133206] 2:2:1: usb_set_interface failed
[ 11.133319] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.133321] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.133321] 2:2:1: usb_set_interface failed
[ 11.133446] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.133448] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.133448] 2:2:1: usb_set_interface failed
[ 11.133733] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.133735] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.133736] 2:2:1: usb_set_interface failed
[ 11.133773] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.133774] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.133775] 2:2:1: usb_set_interface failed
[ 11.133834] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.133836] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.133837] 2:2:1: usb_set_interface failed
[ 11.133953] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.133955] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.133956] 2:2:1: usb_set_interface failed
[ 11.134084] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.134085] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.134086] 2:2:1: usb_set_interface failed
[ 11.134193] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.134195] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.134196] 2:2:1: usb_set_interface failed
[ 11.134232] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.134233] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.134234] 2:2:1: usb_set_interface failed
[ 11.134272] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.134274] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.134275] 2:2:1: usb_set_interface failed
[ 11.134367] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.134369] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.134369] 2:2:1: usb_set_interface failed
[ 11.134474] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.134475] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.134476] 2:2:1: usb_set_interface failed
[ 11.134576] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.134578] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.134578] 2:2:1: usb_set_interface failed
[ 11.134615] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.134616] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.134617] 2:2:1: usb_set_interface failed
[ 11.134655] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.134657] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.134657] 2:2:1: usb_set_interface failed
[ 11.134749] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.134751] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.134752] 2:2:1: usb_set_interface failed
[ 11.134861] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.134863] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.134863] 2:2:1: usb_set_interface failed
[ 11.135003] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.135005] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.135006] 2:2:1: usb_set_interface failed
[ 11.135042] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.135044] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.135045] 2:2:1: usb_set_interface failed
[ 11.135095] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.135097] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.135097] 2:2:1: usb_set_interface failed
[ 11.135210] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.135212] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.135213] 2:2:1: usb_set_interface failed
[ 11.135337] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.135338] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.135339] 2:2:1: usb_set_interface failed
[ 11.135563] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.135565] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.135567] 2:2:1: usb_set_interface failed
[ 11.135602] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.135604] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.135606] 2:2:1: usb_set_interface failed
[ 11.135659] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.135661] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.135662] 2:2:1: usb_set_interface failed
[ 11.135777] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.135778] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.135779] 2:2:1: usb_set_interface failed
[ 11.135952] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.135954] usb 3-2: Not enough bandwidth for altsetting 1
[ 11.135955] 2:2:1: usb_set_interface failed
[ 11.150901] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 11.150903] usb 3-2: Not enough bandwidth for altsetting 0
[ 13.722240] generic-usb 0003:05AC:9221.000A: hiddev0,hidraw7: USB HID v1.11 Device [Apple Computer, Inc. Apple Cinema HD Display] on usb-0000:00:1a.0-1.6.2/input0
[ 13.807265] usb 1-1.6.3: new full-speed USB device number 7 using ehci_hcd
[ 13.902267] input: Logitech Logitech Z305 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.3/1-1.6.3:1.2/input/input16
[ 13.902326] generic-usb 0003:046D:0A23.000B: input,hidraw8: USB HID v1.00 Device [ Logitech Logitech Z305 ] on usb-0000:00:1a.0-1.6.3/input2
[ 16.355960] xhci_hcd 0000:03:00.0: ERROR: unexpected command completion code 0x11.
[ 16.355963] usb 3-2: Not enough bandwidth for altsetting 0
[ 23.869569] audit_printk_skb: 39 callbacks suppressed
[ 23.869570] type=1400 audit(1346297445.418:24): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=2022 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 29.233194] wlan0: authenticate with 00:15:05:d7:66:2a (try 1)
[ 29.234505] wlan0: authenticated
[ 29.249191] wlan0: associate with 00:15:05:d7:66:2a (try 1)
[ 29.258302] wlan0: RX AssocResp from 00:15:05:d7:66:2a (capab=0x471 status=0 aid=11)
[ 29.258304] wlan0: associated
[ 29.258670] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 39.399836] wlan0: no IPv6 routers present