dmesg - 1
Linux version 2.6.18-308.el5 (mockbuild@x86-007.build.bos.redhat.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-50)) #1 SMP Fri Jan 27 17:17:51 EST 2012
Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
BIOS-provided physical RAM map:
BIOS-e820: 0000000000010000 - 000000000009c000 (usable)
BIOS-e820: 0000000000100000 - 00000000bd2f0000 (usable)
BIOS-e820: 00000000bd2f0000 - 00000000bd31c000 (reserved)
BIOS-e820: 00000000bd31c000 - 00000000bd35b000 (ACPI data)
BIOS-e820: 00000000bd35b000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000002040000000 (usable)
DMI 2.7 present.
DMI: Dell Inc. PowerEdge R720/0VWT90, BIOS 1.2.6 05/10/2012
ACPI: RSDP (v002 DELL ) @ 0x00000000000f1090
ACPI: XSDT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f1194
ACPI: FADT (v003 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bd34115c
ACPI: MADT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bd340478
ACPI: SPCR (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bd3405e4
ACPI: HPET (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bd340638
ACPI: DMAR (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bd340674
ACPI: MCFG (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bd340990
ACPI: WD__ (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bd3409d0
ACPI: SLIC (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bd340b08
ACPI: ERST (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bd3233fc
ACPI: HEST (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bd32366c
ACPI: BERT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bd32323c
ACPI: EINJ (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bd32326c
ACPI: TCPA (v002 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bd3410f4
ACPI: SRAT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000bd340d30
ACPI: SSDT (v001 INTEL PPM RCM 0x80000001 INTL 0x20061109) @ 0x00000000bd344000
ACPI: DSDT (v001 DELL PE_SC3 0x00000001 INTL 0x20110211) @ 0x0000000000000000
SRAT: PXM 1 -> APIC 0 -> Node 0
SRAT: PXM 2 -> APIC 32 -> Node 1
SRAT: PXM 1 -> APIC 2 -> Node 0
SRAT: PXM 2 -> APIC 34 -> Node 1
SRAT: PXM 1 -> APIC 4 -> Node 0
SRAT: PXM 2 -> APIC 36 -> Node 1
SRAT: PXM 1 -> APIC 6 -> Node 0
SRAT: PXM 2 -> APIC 38 -> Node 1
SRAT: PXM 1 -> APIC 8 -> Node 0
SRAT: PXM 2 -> APIC 40 -> Node 1
SRAT: PXM 1 -> APIC 10 -> Node 0
SRAT: PXM 2 -> APIC 42 -> Node 1
SRAT: PXM 1 -> APIC 12 -> Node 0
SRAT: PXM 2 -> APIC 44 -> Node 1
SRAT: PXM 1 -> APIC 14 -> Node 0
SRAT: PXM 2 -> APIC 46 -> Node 1
SRAT: PXM 1 -> APIC 1 -> Node 0
SRAT: PXM 2 -> APIC 33 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 0
SRAT: PXM 2 -> APIC 35 -> Node 1
SRAT: PXM 1 -> APIC 5 -> Node 0
SRAT: PXM 2 -> APIC 37 -> Node 1
SRAT: PXM 1 -> APIC 7 -> Node 0
SRAT: PXM 2 -> APIC 39 -> Node 1
SRAT: PXM 1 -> APIC 9 -> Node 0
SRAT: PXM 2 -> APIC 41 -> Node 1
SRAT: PXM 1 -> APIC 11 -> Node 0
SRAT: PXM 2 -> APIC 43 -> Node 1
SRAT: PXM 1 -> APIC 13 -> Node 0
SRAT: PXM 2 -> APIC 45 -> Node 1
SRAT: PXM 1 -> APIC 15 -> Node 0
SRAT: PXM 2 -> APIC 47 -> Node 1
SRAT: Node 0 PXM 1 0-1040000000
SRAT: Node 1 PXM 2 1040000000-2040000000
NUMA: Using 30 for the hash shift.
Bootmem setup node 0 0000000000000000-0000001040000000
bootmap start 7d6000 pages 520
Bootmem setup node 1 0000001040000000-0000002040000000
bootmap start 1040006000 pages 512
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
Setting up node 0 0-1040000
On node 0 totalpages: 16530972
DMA zone: 2292 pages, LIFO batch:0
DMA32 zone: 756520 pages, LIFO batch:31
Normal zone: 15772160 pages, LIFO batch:31
Setting up node 1 1040000-2040000
On node 1 totalpages: 16547840
Normal zone: 16547840 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x20] enabled)
Processor #32 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Processor #2 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x22] enabled)
Processor #34 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
Processor #4 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x24] enabled)
Processor #36 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
Processor #6 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x26] enabled)
Processor #38 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] enabled)
Processor #8 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x28] enabled)
Processor #40 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] enabled)
Processor #10 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2a] enabled)
Processor #42 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] enabled)
Processor #12 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2c] enabled)
Processor #44 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] enabled)
Processor #14 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2e] enabled)
Processor #46 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x01] enabled)
Processor #1 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x21] enabled)
Processor #33 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x03] enabled)
Processor #3 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x23] enabled)
Processor #35 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x05] enabled)
Processor #5 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x25] enabled)
Processor #37 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x07] enabled)
Processor #7 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x27] enabled)
Processor #39 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x09] enabled)
Processor #9 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x29] enabled)
Processor #41 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x0b] enabled)
Processor #11 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x2b] enabled)
Processor #43 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x0d] enabled)
Processor #13 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x2d] enabled)
Processor #45 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x0f] enabled)
Processor #15 6:13 APIC version 21
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x2f] enabled)
Processor #47 6:13 APIC version 21
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xfec3f000] gsi_base[32])
IOAPIC[1]: apic_id 1, version 32, address 0xfec3f000, GSI 32-55
ACPI: IOAPIC (id[0x02] address[0xfec7f000] gsi_base[64])
IOAPIC[2]: apic_id 2, version 32, address 0xfec7f000, GSI 64-87
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
ACPI: HPET id: 0x8086a701 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009c000 - 0000000000100000
Nosave address range: 00000000bd2f0000 - 00000000bd31c000
Nosave address range: 00000000bd31c000 - 00000000bd35b000
Nosave address range: 00000000bd35b000 - 00000000c0000000
Nosave address range: 00000000c0000000 - 00000000e0000000
Nosave address range: 00000000e0000000 - 00000000f0000000
Nosave address range: 00000000f0000000 - 00000000fe000000
Nosave address range: 00000000fe000000 - 0000000100000000
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
SMP: Allowing 32 CPUs, 0 hotplug CPUs
Built 2 zonelists. Total pages: 33078812
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Checking aperture...
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0xd0a2000 - 0x110a2000
Memory: 132047596k/135266304k available (2616k kernel code, 2123524k reserved, 1672k data, 224k init)
Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.12 BogoMIPS (lpj=2000062)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 0/0 -> Node 0
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
MCE: Machine Check Exception Reporting is disabled.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
Detected 6.250 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/32 APIC 0x20
Initializing CPU#1
Calibrating delay using timer specific routine.. 4000.07 BogoMIPS (lpj=2000039)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 1/20 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 2/32 APIC 0x2
Initializing CPU#2
Calibrating delay using timer specific routine.. 4000.02 BogoMIPS (lpj=2000010)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 2/2 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 3/32 APIC 0x22
Initializing CPU#3
Calibrating delay using timer specific routine.. 4000.09 BogoMIPS (lpj=2000045)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 3/22 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 4/32 APIC 0x4
Initializing CPU#4
Calibrating delay using timer specific routine.. 3999.98 BogoMIPS (lpj=1999992)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 4/4 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 5/32 APIC 0x24
Initializing CPU#5
Calibrating delay using timer specific routine.. 4000.06 BogoMIPS (lpj=2000031)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 5/24 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 6/32 APIC 0x6
Initializing CPU#6
Calibrating delay using timer specific routine.. 4000.11 BogoMIPS (lpj=2000057)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 6/6 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 7/32 APIC 0x26
Initializing CPU#7
Calibrating delay using timer specific routine.. 4000.04 BogoMIPS (lpj=2000024)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 7/26 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 3
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 8/32 APIC 0x8
Initializing CPU#8
Calibrating delay using timer specific routine.. 3999.99 BogoMIPS (lpj=1999999)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 8/8 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 4
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 9/32 APIC 0x28
Initializing CPU#9
Calibrating delay using timer specific routine.. 4000.14 BogoMIPS (lpj=2000072)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 9/28 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 4
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 10/32 APIC 0xa
Initializing CPU#10
Calibrating delay using timer specific routine.. 3999.99 BogoMIPS (lpj=1999998)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 10/a -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 5
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 11/32 APIC 0x2a
Initializing CPU#11
Calibrating delay using timer specific routine.. 4000.07 BogoMIPS (lpj=2000036)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 11/2a -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 5
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 12/32 APIC 0xc
Initializing CPU#12
Calibrating delay using timer specific routine.. 4000.11 BogoMIPS (lpj=2000056)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 12/c -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 6
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 13/32 APIC 0x2c
Initializing CPU#13
Calibrating delay using timer specific routine.. 3999.96 BogoMIPS (lpj=1999981)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 13/2c -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 6
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 14/32 APIC 0xe
Initializing CPU#14
Calibrating delay using timer specific routine.. 4000.00 BogoMIPS (lpj=2000001)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 14/e -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 7
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 15/32 APIC 0x2e
Initializing CPU#15
Calibrating delay using timer specific routine.. 4000.13 BogoMIPS (lpj=2000066)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 15/2e -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 7
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 16/32 APIC 0x1
Initializing CPU#16
Calibrating delay using timer specific routine.. 4000.09 BogoMIPS (lpj=2000047)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 16/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 17/32 APIC 0x21
Initializing CPU#17
Calibrating delay using timer specific routine.. 3999.99 BogoMIPS (lpj=1999999)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 17/21 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 18/32 APIC 0x3
Initializing CPU#18
Calibrating delay using timer specific routine.. 4000.00 BogoMIPS (lpj=2000004)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 18/3 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 19/32 APIC 0x23
Initializing CPU#19
Calibrating delay using timer specific routine.. 4000.08 BogoMIPS (lpj=2000043)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 19/23 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 20/32 APIC 0x5
Initializing CPU#20
Calibrating delay using timer specific routine.. 4000.01 BogoMIPS (lpj=2000007)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 20/5 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 21/32 APIC 0x25
Initializing CPU#21
Calibrating delay using timer specific routine.. 4000.06 BogoMIPS (lpj=2000033)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 21/25 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 22/32 APIC 0x7
Initializing CPU#22
Calibrating delay using timer specific routine.. 4000.06 BogoMIPS (lpj=2000033)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 22/7 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 23/32 APIC 0x27
Initializing CPU#23
Calibrating delay using timer specific routine.. 4000.03 BogoMIPS (lpj=2000016)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 23/27 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 3
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 24/32 APIC 0x9
Initializing CPU#24
Calibrating delay using timer specific routine.. 4000.00 BogoMIPS (lpj=2000003)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 24/9 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 4
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 25/32 APIC 0x29
Initializing CPU#25
Calibrating delay using timer specific routine.. 4000.07 BogoMIPS (lpj=2000037)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 25/29 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 4
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 26/32 APIC 0xb
Initializing CPU#26
Calibrating delay using timer specific routine.. 3999.86 BogoMIPS (lpj=1999934)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 26/b -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 5
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 27/32 APIC 0x2b
Initializing CPU#27
Calibrating delay using timer specific routine.. 4000.07 BogoMIPS (lpj=2000038)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 27/2b -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 5
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 28/32 APIC 0xd
Initializing CPU#28
Calibrating delay using timer specific routine.. 4000.11 BogoMIPS (lpj=2000056)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 28/d -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 6
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 29/32 APIC 0x2d
Initializing CPU#29
Calibrating delay using timer specific routine.. 4000.16 BogoMIPS (lpj=2000084)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 29/2d -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 6
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 30/32 APIC 0xf
Initializing CPU#30
Calibrating delay using timer specific routine.. 3999.99 BogoMIPS (lpj=1999998)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 30/f -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 7
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 31/32 APIC 0x2f
Initializing CPU#31
Calibrating delay using timer specific routine.. 4000.04 BogoMIPS (lpj=2000020)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 20480K
CPU 31/2f -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 7
Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz stepping 07
Brought up 32 CPUs
CPU#0: NMI watchdog performance counter calibration - 2769->2793
CPU#1: NMI watchdog performance counter calibration - 42->54
CPU#2: NMI watchdog performance counter calibration - 77->101
CPU#3: NMI watchdog performance counter calibration - 40->52
CPU#4: NMI watchdog performance counter calibration - 76->100
CPU#5: NMI watchdog performance counter calibration - 41->53
CPU#6: NMI watchdog performance counter calibration - 76->100
CPU#7: NMI watchdog performance counter calibration - 40->52
CPU#8: NMI watchdog performance counter calibration - 76->100
CPU#9: NMI watchdog performance counter calibration - 40->52
CPU#10: NMI watchdog performance counter calibration - 75->99
CPU#11: NMI watchdog performance counter calibration - 39->51
CPU#12: NMI watchdog performance counter calibration - 75->99
CPU#13: NMI watchdog performance counter calibration - 40->52
CPU#14: NMI watchdog performance counter calibration - 75->99
CPU#15: NMI watchdog performance counter calibration - 39->51
CPU#16: NMI watchdog performance counter calibration - 74->98
CPU#17: NMI watchdog performance counter calibration - 38->50
CPU#18: NMI watchdog performance counter calibration - 74->98
CPU#19: NMI watchdog performance counter calibration - 38->50
CPU#20: NMI watchdog performance counter calibration - 73->97
CPU#21: NMI watchdog performance counter calibration - 38->50
CPU#22: NMI watchdog performance counter calibration - 73->97
CPU#23: NMI watchdog performance counter calibration - 37->49
CPU#24: NMI watchdog performance counter calibration - 73->97
CPU#25: NMI watchdog performance counter calibration - 37->49
CPU#26: NMI watchdog performance counter calibration - 73->97
CPU#27: NMI watchdog performance counter calibration - 37->49
CPU#28: NMI watchdog performance counter calibration - 72->96
CPU#29: NMI watchdog performance counter calibration - 36->48
CPU#30: NMI watchdog performance counter calibration - 72->96
CPU#31: NMI watchdog performance counter calibration - 36->48
NMI watchdog testing PASSED.
time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
time.c: Detected 2000.062 MHz processor.
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=248 bytes
migration_cost=2,49,1425
checking if image is initramfs... it is
Freeing initrd memory: 3476k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000
PCI: Dell System detected, enabling pci=bfsort.
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:1e.0
bus 0 -> pxm 1 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1C._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Root Bridge [PCI1] (0000:40)
bus 64 -> pxm 2 -> node 1
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.PEXB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.PEXC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.PEXD._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.PEXE._PRT]
ACPI: PCI Root Bridge [P0B1] (0000:3f)
bus 63 -> pxm 1 -> node 0
ACPI: PCI Root Bridge [P1B1] (0000:7f)
bus 127 -> pxm 2 -> node 1
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 11 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 11 *14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *11 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 11 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 *6 7 11 14 15)
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 11 *14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 17 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 64-bit timers, 14318180 Hz
DMAR:Host address width 46
DMAR:DRHD base: 0x000000d3000000 flags: 0x0
IOMMU d3000000: ver 1:0 cap d2078c106f0462 ecap f020fe
DMAR:DRHD base: 0x000000df900000 flags: 0x1
IOMMU df900000: ver 1:0 cap d2078c106f0462 ecap f020fe
DMAR:RMRR base: 0x000000bf458000 end: 0x000000bf46ffff
DMAR:RMRR base: 0x000000bf450000 end: 0x000000bf450fff
DMAR:RMRR base: 0x000000bf452000 end: 0x000000bf452fff
DMAR:ATSR flags: 0x0
DMAR:Unsupported device scope
PCI-GART: No AMD northbridge found.
pnp: 00:07: ioport range 0x800-0x87f could not be reserved
pnp: 00:07: ioport range 0x880-0x8ff has been reserved
pnp: 00:07: ioport range 0x900-0x91f has been reserved
pnp: 00:07: ioport range 0x920-0x923 has been reserved
pnp: 00:07: ioport range 0x924-0x924 has been reserved
pnp: 00:07: ioport range 0x370-0x377 has been reserved
pnp: 00:07: ioport range 0xca0-0xca7 has been reserved
pnp: 00:08: ioport range 0xca8-0xca8 has been reserved
pnp: 00:08: ioport range 0xcac-0xcac has been reserved
pnp: 00:09: iomem range 0xe0000000-0xe3efffff has been reserved
pnp: 00:0b: iomem range 0xe4000000-0xe7ffffff has been reserved
pnp: 00:0d: iomem range 0xe3f00000-0xe3ffffff has been reserved
pnp: 00:0e: iomem range 0xdf900000-0xdf901fff has been reserved
pnp: 00:0f: iomem range 0xd3000000-0xd3001fff has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: dc000000-dc7fffff
PREFETCH window 0x00000000d9000000-0x00000000d90fffff
PCI: Bridge: 0000:00:01.1
IO window: disabled.
MEM window: dc800000-dcffffff
PREFETCH window 0x00000000d9100000-0x00000000d91fffff
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.2
IO window: f000-ffff
MEM window: dd000000-ddffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:11.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:0a:00.0
IO window: disabled.
MEM window: de000000-deffffff
PREFETCH window 0x00000000d8000000-0x00000000d8ffffff
PCI: Bridge: 0000:09:00.0
IO window: disabled.
MEM window: de000000-deffffff
PREFETCH window 0x00000000d8000000-0x00000000d8ffffff
PCI: Bridge: 0000:09:01.0
IO window: disabled.
MEM window: df700000-df7fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:08:00.0
IO window: disabled.
MEM window: de000000-df7fffff
PREFETCH window 0x00000000d8000000-0x00000000d8ffffff
PCI: Bridge: 0000:00:1c.7
IO window: disabled.
MEM window: de000000-df7fffff
PREFETCH window 0x00000000d8000000-0x00000000d8ffffff
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 53 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:01.1[A] -> GSI 53 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.1 to 64
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 53 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:02.0 to 64
ACPI: PCI Interrupt 0000:00:02.2[A] -> GSI 53 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:02.2 to 64
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 53 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:03.0 to 64
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:11.0 to 64
PCI: Setting latency timer of device 0000:00:1c.0 to 64
GSI 18 sharing vector 0xB9 and IRQ 18
ACPI: PCI Interrupt 0000:00:1c.7[D] -> GSI 19 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1c.7 to 64
PCI: Setting latency timer of device 0000:08:00.0 to 64
PCI: Setting latency timer of device 0000:09:00.0 to 64
PCI: Setting latency timer of device 0000:0a:00.0 to 64
PCI: Setting latency timer of device 0000:09:01.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Bridge: 0000:40:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:40:02.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:40:03.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:40:03.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
GSI 19 sharing vector 0xC1 and IRQ 19
ACPI: PCI Interrupt 0000:40:01.0[A] -> GSI 85 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:40:01.0 to 64
ACPI: PCI Interrupt 0000:40:02.0[A] -> GSI 85 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:40:02.0 to 64
ACPI: PCI Interrupt 0000:40:03.0[A] -> GSI 85 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:40:03.0 to 64
ACPI: PCI Interrupt 0000:40:03.2[A] -> GSI 85 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:40:03.2 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1345548666.912:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 2D3142B3E704051
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:0b:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:01.1 to 64
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:02.2 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:11.0 to 64
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.7 to 64
PCI: Setting latency timer of device 0000:08:00.0 to 64
PCI: Setting latency timer of device 0000:09:00.0 to 64
PCI: Setting latency timer of device 0000:09:01.0 to 64
PCI: Setting latency timer of device 0000:40:01.0 to 64
PCI: Setting latency timer of device 0000:40:02.0 to 64
PCI: Setting latency timer of device 0000:40:03.0 to 64
PCI: Setting latency timer of device 0000:40:03.2 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: CPU1 (power states: C1[C1] C2[C2])
ACPI: CPU2 (power states: C1[C1] C2[C2])
ACPI: CPU3 (power states: C1[C1] C2[C2])
ACPI: CPU4 (power states: C1[C1] C2[C2])
ACPI: CPU5 (power states: C1[C1] C2[C2])
ACPI: CPU6 (power states: C1[C1] C2[C2])
ACPI: CPU7 (power states: C1[C1] C2[C2])
ACPI: CPU8 (power states: C1[C1] C2[C2])
ACPI: CPU9 (power states: C1[C1] C2[C2])
ACPI: CPU10 (power states: C1[C1] C2[C2])
ACPI: CPU11 (power states: C1[C1] C2[C2])
ACPI: CPU12 (power states: C1[C1] C2[C2])
ACPI: CPU13 (power states: C1[C1] C2[C2])
ACPI: CPU14 (power states: C1[C1] C2[C2])
ACPI: CPU15 (power states: C1[C1] C2[C2])
ACPI: CPU16 (power states: C1[C1] C2[C2])
ACPI: CPU17 (power states: C1[C1] C2[C2])
ACPI: CPU18 (power states: C1[C1] C2[C2])
ACPI: CPU19 (power states: C1[C1] C2[C2])
ACPI: CPU20 (power states: C1[C1] C2[C2])
ACPI: CPU21 (power states: C1[C1] C2[C2])
ACPI: CPU22 (power states: C1[C1] C2[C2])
ACPI: CPU23 (power states: C1[C1] C2[C2])
ACPI: CPU24 (power states: C1[C1] C2[C2])
ACPI: CPU25 (power states: C1[C1] C2[C2])
ACPI: CPU26 (power states: C1[C1] C2[C2])
ACPI: CPU27 (power states: C1[C1] C2[C2])
ACPI: CPU28 (power states: C1[C1] C2[C2])
ACPI: CPU29 (power states: C1[C1] C2[C2])
ACPI: CPU30 (power states: C1[C1] C2[C2])
ACPI: CPU31 (power states: C1[C1] C2[C2])
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S4 S5)
Initalizing network drop monitor service
Freeing unused kernel memory: 224k freed
Write protecting the kernel read-only data: 530k
GSI 20 sharing vector 0x8A and IRQ 20
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 23 (level, low) -> IRQ 138
PCI: Setting latency timer of device 0000:00:1a.0 to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
PCI: cache line size of 32 is not supported by device 0000:00:1a.0
ehci_hcd 0000:00:1a.0: irq 138, io mem 0xdf8fd000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
GSI 21 sharing vector 0x92 and IRQ 21
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 22 (level, low) -> IRQ 146
PCI: Setting latency timer of device 0000:00:1d.0 to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
PCI: cache line size of 32 is not supported by device 0000:00:1d.0
ehci_hcd 0000:00:1d.0: irq 146, io mem 0xdf8fe000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
megasas: 00.00.05.40-rh2 Thu. Aug. 4 17:00:00 PDT 2011
megasas: 0x1000:0x005b:0x1028:0x1f34: bus 3:slot 0:func 0
GSI 22 sharing vector 0x9A and IRQ 22
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 42 (level, low) -> IRQ 154
PCI: Setting latency timer of device 0000:03:00.0 to 64
megasas: FW now in Ready state
usb 1-1: new high speed USB device using ehci_hcd and address 2
megasas:IOC Init cmd success
megasas: INIT adapter done
megasas: max_sectors : 0x230, cmd_per_lun : 0x80
scsi0 : LSI SAS based MegaRAID driver
Vendor: DELL Model: PERC H710P Rev: 3.13
Type: Direct-Access ANSI SCSI revision: 05
Vendor: DELL Model: PERC H710P Rev: 3.13
Type: Direct-Access ANSI SCSI revision: 05
Vendor: DELL Model: PERC H710P Rev: 3.13
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 285474816 512-byte hdwr sectors (146163 MB)
sda: Write Protect is off
sda: Mode Sense: 1f 00 00 08
SCSI device sda: drive cache: write back
SCSI device sda: 285474816 512-byte hdwr sectors (146163 MB)
sda: Write Protect is off
sda: Mode Sense: 1f 00 00 08
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:2:0:0: Attached scsi disk sda
Vendor: DELL Model: PERC H710P Rev: 3.13
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 2341994496 512-byte hdwr sectors (1199101 MB)
sdb: Write Protect is off
sdb: Mode Sense: 1f 00 00 08
SCSI device sdb: drive cache: write back
SCSI device sdb: 2341994496 512-byte hdwr sectors (1199101 MB)
sdb: Write Protect is off
sdb: Mode Sense: 1f 00 00 08
SCSI device sdb: drive cache: write back
sdb:usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
unknown partition table
sd 0:2:1:0: Attached scsi disk sdb
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
GSI 23 sharing vector 0xAA and IRQ 23
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 20 (level, low) -> IRQ 170
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.2: new low speed USB device using ehci_hcd and address 3
usb 1-1.2: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /class/input/input0
input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.0-1.2
usb 1-1.5: new low speed USB device using ehci_hcd and address 4
usb 1-1.5: configuration #1 chosen from 1 choice
input: Logitech Optical USB Mouse as /class/input/input1
input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1a.0-1.5
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
ata1: SATA max UDMA/133 abar m2048@0xdf8ff000 port 0xdf8ff100 irq 178
ata2: SATA max UDMA/133 abar m2048@0xdf8ff000 port 0xdf8ff180 irq 178
ata3: SATA max UDMA/133 abar m2048@0xdf8ff000 port 0xdf8ff200 irq 178
ata4: SATA max UDMA/133 abar m2048@0xdf8ff000 port 0xdf8ff280 irq 178
ata5: SATA max UDMA/133 abar m2048@0xdf8ff000 port 0xdf8ff300 irq 178
ata6: SATA max UDMA/133 abar m2048@0xdf8ff000 port 0xdf8ff380 irq 178
usb 1-1.6: new high speed USB device using ehci_hcd and address 5
usb 1-1.6: configuration #1 chosen from 1 choice
hub 1-1.6:1.0: USB hub found
hub 1-1.6:1.0: 6 ports detected
ata1: SATA link down (SStatus 0 SControl 300)
usb 1-1.6.1: new high speed USB device using ehci_hcd and address 6
ata2: SATA link down (SStatus 0 SControl 300)
usb 1-1.6.1: configuration #1 chosen from 1 choice
input: Avocent Keyboard/Mouse Function as /class/input/input2
input,hidraw0: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.6.1
input: Avocent Keyboard/Mouse Function as /class/input/input3
input,hidraw0: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.6.1
input: Avocent Keyboard/Mouse Function as /class/input/input4
input,hidraw0: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.6.1
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: PLDS DVD-ROM DS-8D3SH, HD51, max UDMA/100, ATAPI AN
ata5.00: configured for UDMA/100
ata6: SATA link down (SStatus 0 SControl 300)
Vendor: PLDS Model: DVD-ROM DS-8D3SH Rev: HD51
Type: CD-ROM ANSI SCSI revision: 05
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: dm-devel@redhat.com
device-mapper: dm-raid45: initialized v0.2594l
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1345548692.542:2): selinux=0 auid=4294967295 ses=4294967295
sd 0:2:0:0: Attached scsi generic sg0 type 0
sd 0:2:1:0: Attached scsi generic sg1 type 0
scsi 5:0:0:0: Attached scsi generic sg2 type 5
input: PC Speaker as /class/input/input5
tg3.c:v3.119 (May 18, 2011)GSI 24 sharing vector 0xBA and IRQ 24
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 35 (level, low) -> IRQ 186
PCI: Setting latency timer of device 0000:01:00.0 to 64
tg3 0000:01:00.0: eth0: eth0: Tigon3 [partno(BCM95720) rev 5720000 PHY(5720C)] (PCI Express) 10/100/1000Base-T Ethernet d4:ae:52:b3:22:89
tg3 0000:01:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:01:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
GSI 25 sharing vector 0xC2 and IRQ 25
ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 38 (level, low) -> IRQ 194
PCI: Setting latency timer of device 0000:01:00.1 to 64
tg3 0000:01:00.1: eth1: eth1: Tigon3 [partno(BCM95720) rev 5720000 PHY(5720C)] (PCI Express) 10/100/1000Base-T Ethernet d4:ae:52:b3:22:8a
tg3 0000:01:00.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:01:00.1: eth1: dma_rwctrl[00000001] dma_mask[64-bit]
GSI 26 sharing vector 0xCA and IRQ 26
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 34 (level, low) -> IRQ 202
PCI: Setting latency timer of device 0000:02:00.0 to 64
tg3 0000:02:00.0: eth2: eth2: Tigon3 [partno(BCM95720) rev 5720000 PHY(5720C)] (PCI Express) 10/100/1000Base-T Ethernet d4:ae:52:b3:22:8b
tg3 0000:02:00.0: eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:02:00.0: eth2: dma_rwctrl[00000001] dma_mask[64-bit]
GSI 27 sharing vector 0xD2 and IRQ 27
ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 36 (level, low) -> IRQ 210
PCI: Setting latency timer of device 0000:02:00.1 to 64
tg3 0000:02:00.1: eth3: eth3: Tigon3 [partno(BCM95720) rev 5720000 PHY(5720C)] (PCI Express) 10/100/1000Base-T Ethernet d4:ae:52:b3:22:8c
tg3 0000:02:00.1: eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:02:00.1: eth3: dma_rwctrl[00000001] dma_mask[64-bit]
sr0: scsi3-mmc drive: 24x/62x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
floppy0: no floppy controllers found
work still pending
lp: driver loaded but no devices found
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
ACPI: Power Button (FF) [PWRF]
ACPI: Mapper loaded
dell-wmi: No known WMI GUID found
ACPI Exception (evregion-0424): AE_SUPPORT, Returned by Handler for [DataTable] [20060707]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff81104005c710), AE_SUPPORT
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff81104005c6d0), AE_SUPPORT
ACPI Exception (power_meter-0759): AE_SUPPORT, Evaluating _PMC [20060707]
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.6 loaded
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 69369848k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:69369848k
IA-32 Microcode Update Driver: v1.14a
Loading iSCSI transport class v2.0-871.
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
iscsi: registered transport (cxgb3i)
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.7 (July 20, 2011)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.0.3 (Aug 04, 2011)
iscsi: registered transport (bnx2i)
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
iscsi: registered transport (be2iscsi)
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:01:00.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:01:00.0: eth0: Flow control is on for TX and on for RX
tg3 0000:01:00.0: eth0: EEE is disabled
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
eth0: no IPv6 routers present
usb 1-1.2: USB disconnect, address 3
usb 1-1.5: USB disconnect, address 4
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb 1-1.5: new low speed USB device using ehci_hcd and address 7
usb 1-1.5: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /class/input/input6
input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.0-1.5
usb 1-1.2: new low speed USB device using ehci_hcd and address 8
usb 1-1.2: configuration #1 chosen from 1 choice
input: Logitech Optical USB Mouse as /class/input/input7
input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1a.0-1.2
usb 1-1.5: USB disconnect, address 7
usb 1-1.2: USB disconnect, address 8
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A