dmesg - specviewperf9
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-29-generic (buildd@roseapple) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #46-Ubuntu SMP Fri Jul 27 17:04:05 UTC 2012 (Ubuntu 3.2.0-29.46-generic 3.2.24)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ffc6300 (usable)
BIOS-e820: 000000007ffc6300 - 0000000080000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved)
BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
NX (Execute Disable) protection: approximated by x86 segment limits
DMI 2.4 present.
DMI: Hewlett-Packard HP xw4400 Workstation/0A68h, BIOS 786D7 v02.03 04/04/2006
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x7ffc6 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E3FFF write-protect
E4000-EFFFF write-back
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [c00f9bf0] f9bf0
initial memory mapped : 0 - 01c00000
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
RAMDISK: 359aa000 - 36ccd000
ACPI: RSDP 000e7810 00014 (v00 COMPAQ)
ACPI: RSDT 7ffc6340 00044 (v01 HPQOEM SLIC-WKS 20060404 00000000)
ACPI: FACP 7ffc63ec 00074 (v01 COMPAQ GLENWOOD 00000001 00000000)
ACPI: DSDT 7ffc6763 0037B (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
ACPI: FACS 7ffc6300 00040
ACPI: SSDT 7ffc6ade 08DF0 (v01 COMPAQ DSDT_HW 00000001 MSFT 0100000E)
ACPI: APIC 7ffc6460 00084 (v01 COMPAQ GLENWOOD 00000001 00000000)
ACPI: ASF! 7ffc64e4 00063 (v32 COMPAQ GLENWOOD 00000001 00000000)
ACPI: MCFG 7ffc6547 0003C (v01 COMPAQ GLENWOOD 00000001 00000000)
ACPI: TCPA 7ffc6583 00032 (v01 COMPAQ GLENWOOD 00000001 00000000)
ACPI: SLIC 7ffc65b5 00176 (v01 HPQOEM SLIC-WKS 00000001 00000000)
ACPI: HPET 7ffc672b 00038 (v01 COMPAQ GLENWOOD 00000001 00000000)
ACPI: Local APIC address 0xfee00000
1159MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007ffc6
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007ffc6
On node 0 totalpages: 524117
free_area_init_node: node 0, pgdat c1822e80, node_mem_map f49aa200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2320 pages used for memmap
HighMem zone: 294584 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0xf808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:70000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 13 pages/cpu @f77bd000 s31616 r0 d21632 u53248
pcpu-alloc: s31616 r0 d21632 u53248 alloc=13*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520021
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 8387424 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000377fe:0007ffc6)
Memory: 2041220k/2096920k available (5615k kernel code, 55248k reserved, 2765k data, 712k init, 1187616k highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1830000 - 0xc18e2000 ( 712 kB)
.data : 0xc157be04 - 0xc182f580 (2765 kB)
.text : 0xc1000000 - 0xc157be04 (5615 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:712 16
CPU 0 irqstacks, hard=f440a000 soft=f440c000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1866.667 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3733.33 BogoMIPS (lpj=7466668)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20110623
ftrace: allocating 25891 entries in 51 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 CPU 6320 @ 1.86GHz stepping 06
Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog enabled, takes one hw-pmu counter.
CPU 1 irqstacks, hard=f44f2000 soft=f44f4000
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 9b000
Initializing CPU#1
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (7466.82 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
print_constraints: dummy:
RTC time: 5:29:24, date: 08/14/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
EISA bus registered
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 7ffd11f9 004DF (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 004DF (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f44276c0), AE_ALREADY_EXISTS (20110623/psparse-536)
ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfebfffff] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x1000-0x2fff] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x3000-0x6fff] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x7000-0xafff] (ignored)
pci_root PNP0A08:00: host bridge window [io 0xb000-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xefffffff] (ignored)
pci 0000:00:00.0: [8086:277c] type 0 class 0x000600
pci 0000:00:01.0: [8086:277d] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xe0b00000-0xe0b03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: [8086:27e0] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: [8086:27e2] type 1 class 0x000604
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0x3000-0x301f]
pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0x3020-0x303f]
pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f]
pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
pci 0000:00:1d.3: reg 20: [io 0x3060-0x307f]
pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xe0b04000-0xe0b043ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601
pci 0000:00:1f.0: quirk: [io 0xf800-0xf87f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0xfa00-0xfa3f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f)
pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
pci 0000:00:1f.1: reg 10: [io 0x30c0-0x30c7]
pci 0000:00:1f.1: reg 14: [io 0x30e0-0x30e3]
pci 0000:00:1f.1: reg 18: [io 0x30c8-0x30cf]
pci 0000:00:1f.1: reg 1c: [io 0x30e4-0x30e7]
pci 0000:00:1f.1: reg 20: [io 0x30a0-0x30af]
pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0x30d0-0x30d7]
pci 0000:00:1f.2: reg 14: [io 0x30e8-0x30eb]
pci 0000:00:1f.2: reg 18: [io 0x30d8-0x30df]
pci 0000:00:1f.2: reg 1c: [io 0x30ec-0x30ef]
pci 0000:00:1f.2: reg 20: [io 0x30b0-0x30bf]
pci 0000:00:1f.2: reg 24: [mem 0xe0b04400-0xe0b047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:01:00.0: [1002:7153] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xe0500000-0xe050ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0x2000-0x20ff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:7173] type 0 class 0x000380
pci 0000:01:00.1: reg 10: [mem 0xe0510000-0xe051ffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xe0500000-0xe07fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 10-10]
pci 0000:00:1c.4: PCI bridge to [bus 28-28]
pci 0000:3f:00.0: [14e4:167b] type 0 class 0x000200
pci 0000:3f:00.0: reg 10: [mem 0xe0400000-0xe040ffff 64bit]
pci 0000:3f:00.0: PME# supported from D3hot D3cold
pci 0000:3f:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 3f-3f]
pci 0000:00:1c.5: bridge window [mem 0xe0200000-0xe04fffff]
pci 0000:05:04.0: [1033:0035] type 0 class 0x000c03
pci 0000:05:04.0: reg 10: [mem 0xe0a04000-0xe0a04fff]
pci 0000:05:04.0: supports D1 D2
pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot
pci 0000:05:04.0: PME# disabled
pci 0000:05:04.1: [1033:0035] type 0 class 0x000c03
pci 0000:05:04.1: reg 10: [mem 0xe0a05000-0xe0a05fff]
pci 0000:05:04.1: supports D1 D2
pci 0000:05:04.1: PME# supported from D0 D1 D2 D3hot
pci 0000:05:04.1: PME# disabled
pci 0000:05:04.2: [1033:00e0] type 0 class 0x000c03
pci 0000:05:04.2: reg 10: [mem 0xe0a06000-0xe0a060ff]
pci 0000:05:04.2: supports D1 D2
pci 0000:05:04.2: PME# supported from D0 D1 D2 D3hot
pci 0000:05:04.2: PME# disabled
pci 0000:05:09.0: [1186:4c00] type 0 class 0x000200
pci 0000:05:09.0: reg 10: [mem 0xe0a00000-0xe0a03fff]
pci 0000:05:09.0: reg 14: [io 0x1000-0x10ff]
pci 0000:05:09.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:05:09.0: supports D1 D2
pci 0000:05:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:09.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1e.0: bridge window [mem 0xe0800000-0xe0afffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f44276c0), AE_ALREADY_EXISTS (20110623/psparse-536)
ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359)
pci0000:00: Requesting ACPI _OSC control (0x1d)
ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f44276c0), AE_ALREADY_EXISTS (20110623/psparse-536)
ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359)
pci0000:00: ACPI _OSC request failed (AE_ALREADY_EXISTS), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 000000007ffc6300 - 000000007fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0xf4000000-0xfebfffff window]
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x1000-0x2fff window]
pnp 00:00: [io 0x3000-0x6fff window]
pnp 00:00: [io 0x7000-0xafff window]
pnp 00:00: [io 0xb000-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x80000000-0xefffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x00f0-0x00ff]
pnp 00:01: [irq 13]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0080-0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [irq 12]
pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:06: [io 0x0060]
pnp 00:06: [io 0x0064]
pnp 00:06: [irq 1]
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: [irq 7]
pnp 00:07: [dma 3]
pnp 00:07: [io 0x0378-0x037f]
pnp 00:07: [io 0x0778-0x077d]
pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:08: [irq 4]
pnp 00:08: [io 0x03f8-0x03ff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:09: [irq 6]
pnp 00:09: [dma 2]
pnp 00:09: [io 0x03f0-0x03f5]
pnp 00:09: [io 0x03f7]
pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:0a: [mem 0xfec00000-0xfec00fff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:0b: [mem 0xfed00000-0xfed003ff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0c: [io 0x0010-0x001f]
pnp 00:0c: [io 0x0050-0x0053]
pnp 00:0c: [io 0x0072-0x0077]
pnp 00:0c: [io 0x0090-0x009f]
pnp 00:0c: [io 0x04d0-0x04d1]
system 00:0c: [io 0x04d0-0x04d1] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [io 0x4e00-0x4e01]
pnp 00:0d: [io 0x0400-0x048f]
pnp 00:0d: [io 0x0cb0-0x0cbf]
pnp 00:0d: [io 0xf800-0xf87f]
pnp 00:0d: [io 0xfa00-0xfa3f]
pnp 00:0d: [io 0xfc00-0xfc7f]
pnp 00:0d: [io 0xfc80-0xfcff]
pnp 00:0d: [io 0x0cb0-0x0cbf]
pnp 00:0d: [io 0xfe80-0xfeff]
system 00:0d: [io 0x4e00-0x4e01] has been reserved
system 00:0d: [io 0x0400-0x048f] has been reserved
system 00:0d: [io 0x0cb0-0x0cbf] has been reserved
system 00:0d: [io 0xf800-0xf87f] has been reserved
system 00:0d: [io 0xfa00-0xfa3f] has been reserved
system 00:0d: [io 0xfc00-0xfc7f] has been reserved
system 00:0d: [io 0xfc80-0xfcff] has been reserved
system 00:0d: [io 0x0cb0-0x0cbf] has been reserved
system 00:0d: [io 0xfe80-0xfeff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [mem 0x00000000-0x0009ffff]
pnp 00:0e: [mem 0x00100000-0x7fffffff]
pnp 00:0e: [mem 0x000d4000-0x000fffff]
pnp 00:0e: [mem 0xfec01000-0xfecfffff]
pnp 00:0e: [mem 0xfed00400-0xfed3ffff]
pnp 00:0e: [mem 0xfed40000-0xffffffff]
pnp 00:0e: [mem 0xf0000000-0xf3ffffff]
pnp 00:0e: [mem 0x000d2200-0x000e3fff]
system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0e: [mem 0x00100000-0x7fffffff] could not be reserved
system 00:0e: [mem 0x000d4000-0x000fffff] could not be reserved
system 00:0e: [mem 0xfec01000-0xfecfffff] has been reserved
system 00:0e: [mem 0xfed00400-0xfed3ffff] has been reserved
system 00:0e: [mem 0xfed40000-0xffffffff] could not be reserved
system 00:0e: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:0e: [mem 0x000d2200-0x000e3fff] has been reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x800fffff pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0x80100000-0x802fffff 64bit pref]
pci 0000:00:1c.5: BAR 13: assigned [io 0x5000-0x5fff]
pci 0000:00:1c.4: BAR 14: assigned [mem 0x80300000-0x804fffff]
pci 0000:00:1c.4: BAR 15: assigned [mem 0x80500000-0x806fffff 64bit pref]
pci 0000:00:1c.4: BAR 13: assigned [io 0x6000-0x6fff]
pci 0000:00:1c.0: BAR 14: assigned [mem 0x80700000-0x808fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x80900000-0x80afffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x7000-0x7fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xe0000000-0xe001ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xe0500000-0xe07fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 10-10]
pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.0: bridge window [mem 0x80700000-0x808fffff]
pci 0000:00:1c.0: bridge window [mem 0x80900000-0x80afffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 28-28]
pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.4: bridge window [mem 0x80300000-0x804fffff]
pci 0000:00:1c.4: bridge window [mem 0x80500000-0x806fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 3f-3f]
pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.5: bridge window [mem 0xe0200000-0xe04fffff]
pci 0000:00:1c.5: bridge window [mem 0x80100000-0x802fffff 64bit pref]
pci 0000:05:09.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1e.0: bridge window [mem 0xe0800000-0xe0afffff]
pci 0000:00:1e.0: bridge window [mem 0x80000000-0x800fffff pref]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xe0500000-0xe07fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref]
pci_bus 0000:10: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:10: resource 1 [mem 0x80700000-0x808fffff]
pci_bus 0000:10: resource 2 [mem 0x80900000-0x80afffff 64bit pref]
pci_bus 0000:28: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:28: resource 1 [mem 0x80300000-0x804fffff]
pci_bus 0000:28: resource 2 [mem 0x80500000-0x806fffff 64bit pref]
pci_bus 0000:3f: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:3f: resource 1 [mem 0xe0200000-0xe04fffff]
pci_bus 0000:3f: resource 2 [mem 0x80100000-0x802fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:05: resource 1 [mem 0xe0800000-0xe0afffff]
pci_bus 0000:05: resource 2 [mem 0x80000000-0x800fffff pref]
pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
pci_bus 0000:05: resource 5 [mem 0x00000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.1: PCI INT B disabled
pci 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1d.3: PCI INT D disabled
pci 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1d.7: PCI INT A disabled
pci 0000:01:00.0: Boot video device
pci 0000:05:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:05:04.0: PCI INT A disabled
pci 0000:05:04.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
pci 0000:05:04.1: PCI INT B disabled
pci 0000:05:04.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
pci 0000:05:04.2: PCI INT C disabled
PCI: CLS 64 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1344922164.452:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 1667
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x20
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Table is not found!
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
isapnp: Scanning for PnP cards...
Freeing initrd memory: 19596k freed
isapnp: No Plug & Play device found
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xe0b04400 port 0xe0b04500 irq 44
ata2: SATA max UDMA/133 abar m1024@0xe0b04400 port 0xe0b04580 irq 44
ata3: SATA max UDMA/133 abar m1024@0xe0b04400 port 0xe0b04600 irq 44
ata4: SATA max UDMA/133 abar m1024@0xe0b04400 port 0xe0b04680 irq 44
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30a0 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30a8 irq 15
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe0b04000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci_hcd 0000:05:04.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:05:04.2: EHCI Host Controller
ehci_hcd 0000:05:04.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:05:04.2: irq 21, io mem 0xe0a06000
ehci_hcd 0000:05:04.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:05:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:05:04.0: OHCI Host Controller
ohci_hcd 0000:05:04.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:05:04.0: irq 16, io mem 0xe0a04000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:05:04.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:05:04.1: OHCI Host Controller
ohci_hcd 0000:05:04.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:05:04.1: irq 18, io mem 0xe0a05000
ata5.00: ATAPI: HL-DT-STDVD+-RW GSA-H21L, W516, max UDMA/44
ata5.00: configured for UDMA/44
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00003000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 18, io base 0x00003020
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 21, io base 0x00003040
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.3: irq 22, io base 0x00003060
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
EISA: Detected 0 cards.
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 8:517:466
rtc_cmos 00:03: setting system clock to 2012-08-14 05:29:25 UTC (1344922165)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata2.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 4:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-H21L W516 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg2 type 5
Refined TSC clocksource calibration: 1866.732 MHz.
Switching to clocksource tsc
sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 >
sd 1:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 >
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 712k freed
Write protecting the kernel text: 5616k
Write protecting the kernel read-only data: 2324k
udevd[98]: starting version 175
wmi: Mapper loaded
Floppy drive(s): fd0 is 1.44M
[drm] Initialized drm 1.1.0 20060810
tg3.c:v3.121 (November 2, 2011)
tg3 0000:3f:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:3f:00.0: setting latency timer to 64
FDC 0 is a post-1991 82077
skge 0000:05:09.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
skge: 1.14 addr 0xe0a00000 irq 18 chip Yukon rev 1
skge 0000:05:09.0: eth0: addr 00:0d:88:6e:67:a2
tg3 0000:3f:00.0: eth1: Tigon3 [partno(BCM95755) rev a002] (PCI Express) MAC address 00:1c:c4:1f:00:aa
tg3 0000:3f:00.0: eth1: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:3f:00.0: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:3f:00.0: eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
radeon 0000:01:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (RV515 0x1002:0x7153 0x1002:0x1B02).
[drm] register mmio base: 0xE0500000
[drm] register mmio size: 65536
ATOM BIOS: A77607
[drm] Generation 2 PCI interface, using max accessible memory
radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 436956 kiB.
[TTM] Zone highmem: Available graphics memory: 1030764 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] radeon: 1 quad pipes, 1 z pipes initialized.
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
[drm] Loading R500 Microcode
[drm] radeon: ring at 0x0000000010001000
[drm] ring test succeeded in 7 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DVI-I
[drm] HPD1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] DFP1: INTERNAL_KLDSCP_TMDS1
[drm] Connector 1:
[drm] DVI-I
[drm] HPD2
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] DFP3: INTERNAL_LVTM1
[drm] fb mappable at 0xD00C0000
[drm] vram apper at 0xD0000000
[drm] size 5242880
[drm] fb depth is 24
[drm] pitch is 5120
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x64
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
usb 2-3: new high-speed USB device number 2 using ehci_hcd
usbcore: registered new interface driver uas
Initializing USB Mass Storage driver...
scsi6 : usb-storage 2-3:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 8-1: new full-speed USB device number 2 using uhci_hcd
scsi 6:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
scsi 6:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
scsi 6:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:1: Attached scsi generic sg4 type 0
sd 6:0:0:2: Attached scsi generic sg5 type 0
sd 6:0:0:3: Attached scsi generic sg6 type 0
sd 6:0:0:1: [sdd] Attached SCSI removable disk
sd 6:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:2: [sde] Attached SCSI removable disk
sd 6:0:0:3: [sdf] Attached SCSI removable disk
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): mounted filesystem with ordered data mode
init: ureadahead main process (326) terminated with status 5
udevd[409]: starting version 175
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
Adding 979928k swap on /dev/sda5. Priority:-1 extents:1 across:979928k
lp: driver loaded but no devices found
EDAC MC: Ver: 2.1.0
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
EDAC i82975x: ECC disabled on both channels.
leds_ss4200: no LED devices found
udevd[431]: renamed network interface eth1 to rename3
lp0: using parport0 (interrupt-driven).
udevd[444]: renamed network interface eth0 to eth1
udevd[431]: renamed network interface rename3 to eth0
psmouse serio1: hgpk: ID: 00 00 3c
ppdev: user-space parallel port driver
input: ImExPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3
input: HP WMI hotkeys as /devices/virtual/input/input4
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC262: SKU not ready 0x411111f0
hda_codec: ALC262: BIOS auto-probing.
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Line-Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
Linux video capture interface: v2.00
gspca_main: v2.14.0 registered
gspca_main: ov519-2.14.0 probing 05a9:a511
type=1400 audit(1344893376.365:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=642 comm="apparmor_parser"
type=1400 audit(1344893376.365:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=644 comm="apparmor_parser"
type=1400 audit(1344893376.369:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=642 comm="apparmor_parser"
type=1400 audit(1344893376.369:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=644 comm="apparmor_parser"
type=1400 audit(1344893376.369:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=642 comm="apparmor_parser"
type=1400 audit(1344893376.369:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=644 comm="apparmor_parser"
type=1400 audit(1344893376.369:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=641 comm="apparmor_parser"
type=1400 audit(1344893376.369:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=641 comm="apparmor_parser"
type=1400 audit(1344893376.369:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=641 comm="apparmor_parser"
input: ov519 as /devices/pci0000:00/0000:00:1d.3/usb8/8-1/input/input10
usbcore: registered new interface driver ov519
type=1400 audit(1344893376.873:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=768 comm="apparmor_parser"
EXT3-fs (sda1): using internal journal
EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: usrquota,grpquota,user_xattr
EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda6): using internal journal
EXT3-fs (sda6): mounted filesystem with ordered data mode
EXT4-fs (sda14): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda12): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda13): mounted filesystem with ordered data mode. Opts: (null)
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda8): using internal journal
EXT3-fs (sda8): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda7): using internal journal
EXT3-fs (sda7): mounted filesystem with ordered data mode
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
init: failsafe main process (1041) killed by TERM signal
init: munin-node main process (1067) terminated with status 127
init: munin-node main process ended, respawning
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
init: smbd main process (1052) killed by ABRT signal
init: smbd main process ended, respawning
init: smbd main process (1120) killed by ABRT signal
init: smbd main process ended, respawning
audit_printk_skb: 6 callbacks suppressed
type=1400 audit(1344893390.001:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1142 comm="apparmor_parser"
type=1400 audit(1344893390.001:15): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1142 comm="apparmor_parser"
init: smbd main process (1138) killed by ABRT signal
init: smbd main process ended, respawning
init: gdm main process (1134) killed by TERM signal
init: kdm main process (1175) killed by TERM signal
init: smbd main process (1180) killed by ABRT signal
init: smbd main process ended, respawning
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1344893390.989:16): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1238 comm="apparmor_parser"
type=1400 audit(1344893390.993:17): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1240 comm="apparmor_parser"
type=1400 audit(1344893390.993:18): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1240 comm="apparmor_parser"
type=1400 audit(1344893390.993:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1240 comm="apparmor_parser"
type=1400 audit(1344893391.009:20): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1239 comm="apparmor_parser"
type=1400 audit(1344893391.033:21): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=1243 comm="apparmor_parser"
type=1400 audit(1344893391.093:22): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1244 comm="apparmor_parser"
type=1400 audit(1344893391.093:23): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1244 comm="apparmor_parser"
init: smbd main process (1185) killed by ABRT signal
init: smbd main process ended, respawning
init: smbd main process (1255) killed by ABRT signal
init: smbd main process ended, respawning
init: smbd main process (1263) killed by ABRT signal
init: smbd main process ended, respawning
tg3 0000:3f:00.0: irq 46 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
skge 0000:05:09.0: eth1: enabling interface
init: smbd main process (1270) killed by ABRT signal
init: smbd main process ended, respawning
The scan_unevictable_pages sysctl/node-interface has been disabled for lack of a legitimate use case. If you have one, please send an email to linux-mm@kvack.org.
init: smbd main process (1309) killed by ABRT signal
init: smbd main process ended, respawning
process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.default.retrans_time; Use net.ipv6.neigh.default.retrans_time_ms instead.
init: smbd main process (1314) killed by ABRT signal
init: smbd main process ended, respawning
init: smbd main process (1319) killed by ABRT signal
init: smbd respawning too fast, stopped
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
tg3 0000:3f:00.0: eth0: Link is up at 100 Mbps, half duplex
tg3 0000:3f:00.0: eth0: Flow control is off for TX and off for RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
skge 0000:05:09.0: eth1: Link is up at 1000 Mbps, full duplex, flow control both
apm: BIOS not found.
init: Failed to spawn libvirt-bin main process: unable to execute: No such file or directory
init: atd main process (2518) terminated with status 1
init: atd main process ended, respawning
audit_printk_skb: 48 callbacks suppressed
type=1400 audit(1344893397.745:40): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=2651 comm="apparmor_parser"
init: squid3 main process (2642) killed by HUP signal
init: squid3 main process ended, respawning
init: dovecot main process (2641) terminated with status 89
Netfilter messages via NETLINK v0.30.
ctnetlink v0.93: registering with nfnetlink.
eth0: no IPv6 routers present
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=0 offMin=0x40c offMax=0x12b4
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
vboxpci: IOMMU not found (not registered)
AIF:Blocked host(s): IN= OUT=eth0 SRC=140.131.153.2 DST=114.80.81.1 LEN=76 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=123 DPT=123 LEN=56
AIF:Blocked host(s): IN= OUT=eth0 SRC=140.131.153.2 DST=114.80.81.1 LEN=76 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=123 DPT=123 LEN=56
AIF:Blocked host(s): IN= OUT=eth0 SRC=140.131.153.2 DST=114.80.81.13 LEN=76 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=123 DPT=123 LEN=56
eth1: no IPv6 routers present
init: plymouth-stop pre-start process (6501) terminated with status 1