dmesg - run001
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.1.0-1.2-desktop (geeko@buildhost) (gcc version 4.6.2 (SUSE Linux) ) #1 SMP PREEMPT Thu Nov 3 14:45:45 UTC 2011 (187dde0)
Command line: root=/dev/disk/by-id/ata-ST31000528AS_9VP13LZ0-part2 resume=/dev/disk/by-id/ata-HDS724040KLSA80_KRFT06RAGKREEC-part1 splash=silent quiet vga=0x31a
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000006ff90000 (usable)
BIOS-e820: 000000006ff90000 - 000000006ffa8000 (ACPI data)
BIOS-e820: 000000006ffa8000 - 000000006ffd0000 (ACPI NVS)
BIOS-e820: 000000006ffd0000 - 0000000070000000 (reserved)
BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI present.
DMI: System manufacturer System Product Name/M4A785TD-V EVO, BIOS 0410 09/10/2009
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x6ff90 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFFC0000000 write-back
1 base 000040000000 mask FFFFE0000000 write-back
2 base 000060000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [ffff8800000ff780] ff780
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000099000] 99000 size 20480
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-000000006ff90000
0000000000 - 0040000000 page 1G
0040000000 - 006fe00000 page 2M
006fe00000 - 006ff90000 page 4k
kernel direct mapping tables up to 6ff90000 @ 1fffd000-20000000
RAMDISK: 37497000 - 37ff0000
ACPI: RSDP 00000000000fb4f0 00024 (v02 ACPIAM)
ACPI: XSDT 000000006ff90100 00054 (v01 091009 XSDT1614 20090910 MSFT 00000097)
ACPI: FACP 000000006ff90290 000F4 (v03 091009 FACP1614 20090910 MSFT 00000097)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 - not using it (20110623/tbfadt-560)
ACPI: DSDT 000000006ff90450 0D60E (v01 A1392 A1392001 00000001 INTL 20060113)
ACPI: FACS 000000006ffa8000 00040
ACPI: APIC 000000006ff90390 0007C (v01 091009 APIC1614 20090910 MSFT 00000097)
ACPI: MCFG 000000006ff90410 0003C (v01 091009 OEMMCFG 20090910 MSFT 00000097)
ACPI: OEMB 000000006ffa8040 00072 (v01 091009 OEMB1614 20090910 MSFT 00000097)
ACPI: HPET 000000006ff9f450 00038 (v01 091009 OEMHPET 20090910 MSFT 00000097)
ACPI: SSDT 000000006ff9f490 00458 (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-000000006ff90000
Initmem setup node 0 0000000000000000-000000006ff90000
NODE_DATA [000000006ff7c000 - 000000006ff8ffff]
[ffffea0000000000-ffffea00019fffff] PMD -> [ffff88006da00000-ffff88006f3fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x0006ff90
On node 0 totalpages: 458526
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3921 pages, LIFO batch:0
DMA32 zone: 6215 pages used for memmap
DMA32 zone: 448329 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
SMP: Allowing 6 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 70000000 (gap: 70000000:8f700000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88006fc00000 s78208 r8192 d24192 u262144
pcpu-alloc: s78208 r8192 d24192 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists in Node order, mobility grouping on. Total pages: 452250
Policy zone: DMA32
Kernel command line: root=/dev/disk/by-id/ata-ST31000528AS_9VP13LZ0-part2 resume=/dev/disk/by-id/ata-HDS724040KLSA80_KRFT06RAGKREEC-part1 splash=silent quiet vga=0x31a
bootsplash: silent mode.
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 36000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Memory: 1778744k/1834560k available (5791k kernel code, 456k absent, 55360k reserved, 7776k data, 940k init)
Preemptible hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:728 16
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 14680064 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2999.736 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.47 BogoMIPS (lpj=2999736)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
ACPI: Core revision 20110623
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X2 545 Processor stepping 02
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (11999.43 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at 6ffa8000 (163840 bytes)
print_constraints: dummy:
RTC time: 18:09:59, date: 08/09/12
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 0000000080000000 aka 2048M
Fam 10h mmconf [e0000000, efffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [80000000, cfffffff]
node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
node 0 link 0: mmio [f0000000, fe7fffff]
node 0 link 0: mmio [fe800000, fe9fffff]
node 0 link 0: mmio [fea00000, ffefffff]
bus: [00, 07] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0x80000000-0xdfffffff]
bus: 00 index 3 [mem 0xf0000000-0xfcffffffff]
Extended Config Space enabled on 1 nodes
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0x70000000-0xdfffffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
pci 0000:00:01.0: [1043:9602] type 1 class 0x000604
pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
pci 0000:00:11.0: reg 10: [io 0xb000-0xb007]
pci 0000:00:11.0: reg 14: [io 0xa000-0xa003]
pci 0000:00:11.0: reg 18: [io 0x9000-0x9007]
pci 0000:00:11.0: reg 1c: [io 0x8000-0x8003]
pci 0000:00:11.0: reg 20: [io 0x7000-0x700f]
pci 0000:00:11.0: reg 24: [mem 0xfe7ffc00-0xfe7fffff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:12.0: reg 10: [mem 0xfe7fe000-0xfe7fefff]
pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
pci 0000:00:12.1: reg 10: [mem 0xfe7fd000-0xfe7fdfff]
pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:12.2: reg 10: [mem 0xfe7ff800-0xfe7ff8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:13.0: reg 10: [mem 0xfe7fc000-0xfe7fcfff]
pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
pci 0000:00:13.1: reg 10: [mem 0xfe7fb000-0xfe7fbfff]
pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:13.2: reg 10: [mem 0xfe7ff400-0xfe7ff4ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
pci 0000:00:14.2: reg 10: [mem 0xfe7f4000-0xfe7f7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
pci 0000:00:14.5: reg 10: [mem 0xfe7fa000-0xfe7fafff]
pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
pci 0000:01:05.0: [1002:9710] type 0 class 0x000300
pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
pci 0000:01:05.0: reg 14: [io 0xc000-0xc0ff]
pci 0000:01:05.0: reg 18: [mem 0xfe9f0000-0xfe9fffff]
pci 0000:01:05.0: reg 24: [mem 0xfe800000-0xfe8fffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:01:05.1: [1002:970f] type 0 class 0x000403
pci 0000:01:05.1: reg 10: [mem 0xfe9e8000-0xfe9ebfff]
pci 0000:01:05.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:02:00.0: reg 10: [io 0xd800-0xd8ff]
pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
pci 0000:02:00.0: reg 30: [mem 0xfeaf0000-0xfeafffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:03:08.0: [1106:3044] type 0 class 0x000c00
pci 0000:03:08.0: reg 10: [mem 0xfebff800-0xfebfffff]
pci 0000:03:08.0: reg 14: [io 0xec00-0xec7f]
pci 0000:03:08.0: supports D2
pci 0000:03:08.0: PME# supported from D2 D3hot D3cold
pci 0000:03:08.0: PME# disabled
pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x70000000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15)
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:05.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009ec00 - 000000000009ffff
reserve RAM buffer: 000000006ff90000 - 000000006fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0x70000000-0xdfffffff window]
pnp 00:00: [mem 0xf0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:01: [mem 0x70000000-0x7fffffff]
system 00:01: [mem 0x70000000-0x7fffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x0083]
pnp 00:02: [io 0x0087]
pnp 00:02: [io 0x0089-0x008b]
pnp 00:02: [io 0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x0378-0x037f]
pnp 00:06: [irq 7]
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:07: [mem 0xfed00000-0xfed003ff]
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:09: [io 0x03f8-0x03ff]
pnp 00:09: [irq 4]
pnp 00:09: [dma 0 disabled]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: [mem 0xfec00000-0xfec00fff]
pnp 00:0a: [mem 0xfee00000-0xfee00fff]
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [io 0x0010-0x001f]
pnp 00:0b: [io 0x0022-0x003f]
pnp 00:0b: [io 0x0062-0x0063]
pnp 00:0b: [io 0x0065-0x006f]
pnp 00:0b: [io 0x0072-0x007f]
pnp 00:0b: [io 0x0080]
pnp 00:0b: [io 0x0084-0x0086]
pnp 00:0b: [io 0x0088]
pnp 00:0b: [io 0x008c-0x008e]
pnp 00:0b: [io 0x0090-0x009f]
pnp 00:0b: [io 0x00a2-0x00bf]
pnp 00:0b: [io 0x00b1]
pnp 00:0b: [io 0x00e0-0x00ef]
pnp 00:0b: [io 0x04d0-0x04d1]
pnp 00:0b: [io 0x040b]
pnp 00:0b: [io 0x04d6]
pnp 00:0b: [io 0x0c00-0x0c01]
pnp 00:0b: [io 0x0c14]
pnp 00:0b: [io 0x0c50-0x0c51]
pnp 00:0b: [io 0x0c52]
pnp 00:0b: [io 0x0c6c]
pnp 00:0b: [io 0x0c6f]
pnp 00:0b: [io 0x0cd0-0x0cd1]
pnp 00:0b: [io 0x0cd2-0x0cd3]
pnp 00:0b: [io 0x0cd4-0x0cd5]
pnp 00:0b: [io 0x0cd6-0x0cd7]
pnp 00:0b: [io 0x0cd8-0x0cdf]
pnp 00:0b: [io 0x0b00-0x0b3f]
pnp 00:0b: [io 0x0800-0x089f]
pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:0b: [io 0x0b00-0x0b0f]
pnp 00:0b: [io 0x0b20-0x0b3f]
pnp 00:0b: [io 0x0900-0x090f]
pnp 00:0b: [io 0x0910-0x091f]
pnp 00:0b: [io 0xfe00-0xfefe]
pnp 00:0b: [io 0x0060-0x005f disabled]
pnp 00:0b: [io 0x0064-0x0063 disabled]
pnp 00:0b: [mem 0xffb80000-0xffbfffff]
pnp 00:0b: [mem 0xfec10000-0xfec1001f]
pnp 00:0b: [mem 0xfed40000-0xfed44fff]
system 00:0b: [io 0x04d0-0x04d1] has been reserved
system 00:0b: [io 0x040b] has been reserved
system 00:0b: [io 0x04d6] has been reserved
system 00:0b: [io 0x0c00-0x0c01] has been reserved
system 00:0b: [io 0x0c14] has been reserved
system 00:0b: [io 0x0c50-0x0c51] has been reserved
system 00:0b: [io 0x0c52] has been reserved
system 00:0b: [io 0x0c6c] has been reserved
system 00:0b: [io 0x0c6f] has been reserved
system 00:0b: [io 0x0cd0-0x0cd1] has been reserved
system 00:0b: [io 0x0cd2-0x0cd3] has been reserved
system 00:0b: [io 0x0cd4-0x0cd5] has been reserved
system 00:0b: [io 0x0cd6-0x0cd7] has been reserved
system 00:0b: [io 0x0cd8-0x0cdf] has been reserved
system 00:0b: [io 0x0b00-0x0b3f] has been reserved
system 00:0b: [io 0x0800-0x089f] has been reserved
system 00:0b: [io 0x0b00-0x0b0f] has been reserved
system 00:0b: [io 0x0b20-0x0b3f] has been reserved
system 00:0b: [io 0x0900-0x090f] has been reserved
system 00:0b: [io 0x0910-0x091f] has been reserved
system 00:0b: [io 0xfe00-0xfefe] has been reserved
system 00:0b: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:0b: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:0b: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:0c: [io 0x0230-0x023f]
pnp 00:0c: [io 0x0290-0x029f]
pnp 00:0c: [io 0x0300-0x030f]
pnp 00:0c: [io 0x0a30-0x0a3f]
system 00:0c: [io 0x0230-0x023f] has been reserved
system 00:0c: [io 0x0290-0x029f] has been reserved
system 00:0c: [io 0x0300-0x030f] has been reserved
system 00:0c: [io 0x0a30-0x0a3f] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0xe0000000-0xefffffff]
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [mem 0x00000000-0x0009ffff]
pnp 00:0e: [mem 0x000c0000-0x000cffff]
pnp 00:0e: [mem 0x000e0000-0x000fffff]
pnp 00:0e: [mem 0x00100000-0x6fffffff]
pnp 00:0e: [mem 0xfec00000-0xffffffff]
system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0e: [mem 0x00100000-0x6fffffff] could not be reserved
system 00:0e: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03-03]
pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:0a.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x70000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe9fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0x70000000-0xdfffffff]
pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:01:05.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 11620k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1344535799.554:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 3496
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:0a.0: setting latency timer to 64
pcieport 0000:00:0a.0: irq 40 for MSI/MSI-X
vesafb: mode is 1280x1024x16, linelength=2560, pages=5
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010980000, using 5120k, total 16384k
bootsplash 3.2.0-2010/03/31: looking for picture...
bootsplash: silentjpeg size 109002 bytes
bootsplash: ...found (1280x1024, 40442 bytes, v3).
Console: switching to colour frame buffer device 156x60
fb0: VESA VGA frame buffer device
ERST: Table is not found!
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe80 irq 22
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe7ff800
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.1.0-1.2-desktop ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe7ff400
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.1.0-1.2-desktop ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe7fe000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.1.0-1.2-desktop ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe7fd000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.1.0-1.2-desktop ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe7fc000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.1.0-1.2-desktop ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe7fb000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.1.0-1.2-desktop ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe7fa000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 3.1.0-1.2-desktop ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 10
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Registering the dns_resolver key type
libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
PM: Checking hibernation image partition /dev/disk/by-id/ata-HDS724040KLSA80_KRFT06RAGKREEC-part1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: ST31000528AS, CC36, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC36 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: ATA-7: HDS724040KLSA80, KFAOA46A, max UDMA/133
ata3.00: 781422768 sectors, multi 16: LBA48
ata3.00: configured for UDMA/133
ata2.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
ata2.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
usb 5-3: new full speed USB device number 2 using ohci_hcd
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA HDS724040KLSA80 KFAO PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 781422768 512-byte logical blocks: (400 GB/372 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2
sd 2:0:0:0: [sdc] Attached SCSI disk
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 8:214:190
acpi device:1c: hash matches
rtc_cmos 00:03: setting system clock to 2012-08-09 18:10:01 UTC (1344535801)
Freeing unused kernel memory: 940k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 336k freed
Freeing unused kernel memory: 2020k freed
Refined TSC clocksource calibration: 3000.000 MHz.
Switching to clocksource tsc
udevd[125]: starting version 173
ACPI: acpi_idle registered with cpuidle
usb 5-3: New USB device found, idVendor=1038, idProduct=1361
usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-3: Product: SteelSeries
usb 5-3: Manufacturer: La-VIEW Technology
input: La-VIEW Technology SteelSeries as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/input/input1
generic-usb 0003:1038:1361.0001: input,hidraw0: USB HID v1.00 Mouse [La-VIEW Technology SteelSeries ] on usb-0000:00:13.0-3/input0
generic-usb: probe of 0003:1038:1361.0002 failed with error -22
PM: Marking nosave pages: 000000000009e000 - 0000000000100000
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
PM: Starting manual resume from disk
PM: Hibernation image partition 8:33 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda2): using internal journal
EXT3-fs (sda2): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda5): using internal journal
EXT3-fs (sda5): mounted filesystem with ordered data mode
systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; suse)
systemd[1]: Set hostname to .
udevd[384]: starting version 173
systemd-readahead-replay[381]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day.
boot.localnet[404]: Using boot-specified hostname 'dnuk1.Home'
boot.lvm[403]: Waiting for udev to settle...
boot.localnet[404]: Setting up hostname 'dnuk1'..done
boot.lvm[403]: Scanning for LVM volume groups...
boot.localnet[404]: Setting up loopback interface RTNETLINK answers: File exists
boot.localnet[404]: ..done
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: irq 41 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc9000030e000, 90:e6:ba:bd:6c:98, XID 083000c0 IRQ 41
MCE: In-kernel MCE decoding enabled.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 2.1.0
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
input: PC Speaker as /devices/platform/pcspkr/input/input2
wmi: Mapper loaded
firewire_ohci 0000:03:08.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
IT8712 SuperIO detected.
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
firewire_ohci: Added fw-ohci device 0000:03:08.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_atiixp 0000:00:14.1: setting latency timer to 64
scsi4 : pata_atiixp
scsi5 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
udevd[441]: renamed network interface eth0 to eth1
ppdev: user-space parallel port driver
SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
SP5100 TCO timer: mmio address 0xfec000f0 already in use
ata5.00: ATAPI: _NEC DVD_RW ND-3520A, 1.04, max UDMA/33
ata5.00: configured for UDMA/33
scsi 4:0:0:0: CD-ROM _NEC DVD_RW ND-3520A 1.04 PQ: 0 ANSI: 5
scsi 4:0:0:0: Attached scsi generic sg3 type 5
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
firewire_core: created device fw0: GUID 1e00000000008c00, S400
ifup[661]: Service network not started and mode 'auto' -> skipping
mtp-probe[556]: checking bus 5, device 2: "/sys/devices/pci0000:00/0000:00:13.0/usb5/5-3"
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
boot.lvm[403]: Reading all physical volumes. This may take a while...
boot.lvm[403]: Found volume group "rkvg" using metadata type lvm2
boot.lvm[403]: Activating LVM volume groups...
mtp-probe[556]: bus: 5, device: 2 was not an MTP device
snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ALSA hda_intel.c:2415 Using LPIB position fix
ALSA hda_intel.c:1492 Enable sync_write for stable communication
ALSA hda_codec.c:4877 autoconfig: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
ALSA hda_codec.c:4881 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA hda_codec.c:4885 hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
ALSA hda_codec.c:4886 mono: mono_out=0x0
ALSA hda_codec.c:4889 dig-out=0x20/0x21
ALSA hda_codec.c:4890 inputs:
ALSA hda_codec.c:4894 Rear Mic=0x1a
ALSA hda_codec.c:4894 Front Mic=0x1e
ALSA hda_codec.c:4894 Line=0x1b
ALSA hda_codec.c:4896
snd_hda_intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ALSA hda_intel.c:2415 Using LPIB position fix
snd_hda_intel 0000:01:05.1: setting latency timer to 64
ALSA hda_intel.c:1492 Enable sync_write for stable communication
Adding 2095100k swap on /dev/sdc1. Priority:0 extents:1 across:2095100k
boot.lvm[403]: 1 logical volume(s) in volume group "rkvg" now active
boot.lvm[403]: ..done
systemd-fsck[737]: /dev/sda6: clean, 1589/328320 files, 173535/1310720 blocks (check in 4 mounts)
systemd-fsck[754]: /dev/sda7: clean, 122/328320 files, 56525/1310720 blocks
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl,user_xattr
systemd-fsck[747]: /dev/mapper/rkvg-rklv: clean, 765028/174702592 files, 272715625/698780672 blocks
systemd-fsck[761]: /dev/sda8: clean, 72/328320 files, 64523/1310720 blocks
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: acl,user_xattr
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: acl,user_xattr
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: acl,user_xattr
systemd-fsck[758]: /dev/sda1: clean, 44/25896 files, 36426/103424 blocks
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): using internal journal
EXT3-fs (sda1): mounted filesystem with ordered data mode
boot.fglrxrebuild[808]: Check for rebuild the fglrx kernel module if necessary ...
boot.fglrxrebuild[808]: The fglrx kernel module does not exist! I build it NOW. Please wait ...
boot.fglrxrebuild[808]: FATAL: The fglrx kernel module could not be built!
boot.fglrxrebuild[808]: Check for the fglrx kernel module is running...
boot.fglrxrebuild[808]: The fglrx kernel module is not loaded! Try it to modprobe now ...
boot.fglrxrebuild[808]: FATAL: Module fglrx not found.
boot.fglrxrebuild[808]: FATAL: The fglrx kernel module could not loaded!
boot.fglrxrebuild[808]: ..failed
systemd[1]: fglrxrebuild.service: control process exited, code=exited status=1
systemd[1]: Unit fglrxrebuild.service entered failed state.
powernow-k8: Found 1 AMD Phenom(tm) II X2 545 Processor (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (3000 MHz)
powernow-k8: 1 : pstate 1 (2300 MHz)
powernow-k8: 2 : pstate 2 (1800 MHz)
powernow-k8: 3 : pstate 3 (800 MHz)
cpufreq[984]: Loading CPUFreq modules..done
logger[1029]: Requesting microcode for AMD fam10h or newer CPU(s)
microcode: CPU0: patch_level=0x01000086
microcode: CPU1: patch_level=0x01000086
microcode: Microcode Update Driver: v2.00 , Peter Oruba
microcode.ctl[982]: Checking/updating CPU microcode .. AMD fam10h or newer CPU(s) found..done
r8169 0000:02:00.0: eth1: unable to load firmware patch rtl_nic/rtl8168d-2.fw (-2)
r8169 0000:02:00.0: eth1: link down
r8169 0000:02:00.0: eth1: link down
ADDRCONF(NETDEV_UP): eth1: link is not ready
NET: Registered protocol family 17
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
checking generic (d0000000 1000000) vs hw (d0000000 10000000)
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
radeon 0000:01:05.0: setting latency timer to 64
[drm] initializing kernel modesetting (RS880 0x1002:0x9710 0x1043:0x83A2).
[drm] register mmio base: 0xFE9F0000
[drm] register mmio size: 65536
ATOM BIOS: 113
radeon 0000:01:05.0: VRAM: 368M 0x00000000C0000000 - 0x00000000D6FFFFFF (368M used)
radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=368M, BAR=256M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 896830 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 368M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RS780 Microcode
r600_cp: Failed to load firmware "radeon/R600_rlc.bin"
[drm:r600_startup] *ERROR* Failed to load firmware!
radeon 0000:01:05.0: disabling GPU acceleration
radeon 0000:01:05.0: ffff88006a5b6400 unpin not necessary
radeon 0000:01:05.0: ffff88006a5b6400 unpin not necessary
failed to evaluate ATIF got AE_BAD_PARAMETER
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] DVI-D
[drm] HPD1
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP3: INTERNAL_KLDSCP_LVTMA
[drm] Radeon display connector VGA-1: Found valid EDID
bootsplash: status on console 0 changed to on
[drm] Radeon display connector DVI-D-1: No monitor connected or invalid EDID
[drm] radeon: power management initialized
[drm] fb mappable at 0xD0040000
[drm] vram apper at 0xD0000000
[drm] size 5242880
[drm] fb depth is 24
[drm] pitch is 5120
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x64
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.11.0 20080528 for 0000:01:05.0 on minor 0
r8169 0000:02:00.0: eth1: link up
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth1: no IPv6 routers present
EXT4-fs (sda6): re-mounted. Opts: acl,user_xattr,commit=0
EXT4-fs (sda7): re-mounted. Opts: acl,user_xattr,commit=0
EXT4-fs (dm-0): re-mounted. Opts: acl,user_xattr,commit=0
EXT4-fs (sda8): re-mounted. Opts: acl,user_xattr,commit=0
fuse init (API version 7.17)
mount[5919]: mount: fusectl already mounted or /sys/fs/fuse/connections busy
mount[5919]: mount: according to mtab, fusectl is already mounted on /sys/fs/fuse/connections
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
NVRM: No NVIDIA graphics adapter found!