dmesg - obelix
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-24-i7 (root@srosato-desktop-xen) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #38 SMP Sat May 5 00:43:29 EDT 2012 (Ubuntu 3.2.0-24.38-i7 3.2.16)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
Freeing 9d-100 pfn range: 99 pages freed
1-1 mapping on 9d->100
Freeing ae6d7-aeb1a pfn range: 1091 pages freed
1-1 mapping on ae6d7->aeb1a
Freeing aee0b-aef81 pfn range: 374 pages freed
1-1 mapping on aee0b->aef81
Freeing aef83-aeff7 pfn range: 116 pages freed
1-1 mapping on aef83->aeff7
Freeing af000-100000 pfn range: 331776 pages freed
1-1 mapping on af000->100000
Released 333456 pages of unused memory
Set 333456 page(s) to 1-1 mapping
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 000000000009d000 (usable)
Xen: 000000000009d800 - 0000000000100000 (reserved)
Xen: 0000000000100000 - 00000000ae6d7000 (usable)
Xen: 00000000ae6d7000 - 00000000ae7e0000 (ACPI NVS)
Xen: 00000000ae7e0000 - 00000000ae917000 (reserved)
Xen: 00000000ae917000 - 00000000aeb1a000 (ACPI NVS)
Xen: 00000000aeb1a000 - 00000000aee0b000 (usable)
Xen: 00000000aee0b000 - 00000000aee12000 (ACPI NVS)
Xen: 00000000aee12000 - 00000000aee1b000 (ACPI data)
Xen: 00000000aee1b000 - 00000000aef4e000 (reserved)
Xen: 00000000aef4e000 - 00000000aef5f000 (ACPI NVS)
Xen: 00000000aef5f000 - 00000000aef81000 (reserved)
Xen: 00000000aef81000 - 00000000aef83000 (usable)
Xen: 00000000aef83000 - 00000000aefd0000 (reserved)
Xen: 00000000aefd0000 - 00000000aefda000 (ACPI NVS)
Xen: 00000000aefda000 - 00000000aeff7000 (reserved)
Xen: 00000000aeff7000 - 00000000af000000 (usable)
Xen: 00000000e0000000 - 00000000f0000000 (reserved)
Xen: 00000000fec00000 - 00000000fec02000 (reserved)
Xen: 00000000fed1c000 - 00000000fed20000 (reserved)
Xen: 00000000fee00000 - 00000000fee01000 (reserved)
Xen: 00000000ff000000 - 0000000100000000 (reserved)
Xen: 0000000100000000 - 0000000650000000 (usable)
NX (Execute Disable) protection: active
DMI 2.7 present.
DMI: System manufacturer System Product Name/P9X79, BIOS 0906 12/22/2011
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x650000 max_arch_pfn = 0x400000000
x2apic enabled by BIOS, switching to x2apic ops
last_pfn = 0xaf000 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000fd030] fd030
initial memory mapped : 0 - 0559c000
Base memory trampoline at [ffff880000098000] 98000 size 20480
init_memory_mapping: 0000000000000000-00000000af000000
0000000000 - 00af000000 page 4k
kernel direct mapping tables up to af000000 @ a84000-1000000
xen: setting RW the range fb6000 - 1000000
init_memory_mapping: 0000000100000000-0000000650000000
0100000000 - 0650000000 page 4k
kernel direct mapping tables up to 650000000 @ ab43c000-ae6d7000
xen: setting RW the range aded2000 - ae6d7000
RAMDISK: 02060000 - 0559c000
ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
ACPI: XSDT 00000000aee12068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000aee1a788 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000aee12150 08634 (v02 ALASKA A M I 00000006 INTL 20051117)
ACPI: FACS 00000000aefd7f80 00040
ACPI: APIC 00000000aee1a880 0009E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000aee1a920 001D6 (v01 AMICPU PROC 00000001 MSFT 03000001)
ACPI: MCFG 00000000aee1aaf8 0003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: HPET 00000000aee1ab38 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
ACPI: XMAR 00000000aee1ab70 000EC (v01 A M I OEMDMAR 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to cluster x2apic.
No NUMA configuration found
Faking a node at 0000000000000000-0000000650000000
Initmem setup node 0 0000000000000000-0000000650000000
NODE_DATA [00000005e262e000 - 00000005e2632fff]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00650000
Movable zone start PFN for each node
early_node_map[6] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x000ae6d7
0: 0x000aeb1a -> 0x000aee0b
0: 0x000aef81 -> 0x000aef83
0: 0x000aeff7 -> 0x000af000
0: 0x00100000 -> 0x00650000
On node 0 totalpages: 6285664
DMA zone: 64 pages used for memmap
DMA zone: 1335 pages reserved
DMA zone: 2582 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 694803 pages, LIFO batch:31
Normal zone: 87040 pages used for memmap
Normal zone: 5483520 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 255, address 0xfec00000, GSI 0-255
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 255, address 0xfec01000, GSI 24-279
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 296
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 0000000000100000
PM: Registered nosave memory: 00000000ae6d7000 - 00000000ae7e0000
PM: Registered nosave memory: 00000000ae7e0000 - 00000000ae917000
PM: Registered nosave memory: 00000000ae917000 - 00000000aeb1a000
PM: Registered nosave memory: 00000000aee0b000 - 00000000aee12000
PM: Registered nosave memory: 00000000aee12000 - 00000000aee1b000
PM: Registered nosave memory: 00000000aee1b000 - 00000000aef4e000
PM: Registered nosave memory: 00000000aef4e000 - 00000000aef5f000
PM: Registered nosave memory: 00000000aef5f000 - 00000000aef81000
PM: Registered nosave memory: 00000000aef83000 - 00000000aefd0000
PM: Registered nosave memory: 00000000aefd0000 - 00000000aefda000
PM: Registered nosave memory: 00000000aefda000 - 00000000aeff7000
PM: Registered nosave memory: 00000000af000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec02000
PM: Registered nosave memory: 00000000fec02000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at af000000 (gap: af000000:31000000)
Booting paravirtualized kernel on Xen
Xen version: 4.1.2 (preserve-AD)
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff8805e24fc000 s83072 r8192 d23424 u114688
pcpu-alloc: s83072 r8192 d23424 u114688 alloc=28*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 6180905
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Placing 64MB software IO TLB between ffff8805c5d68000 - ffff8805c9d68000
software IO TLB at phys 0x5c5d68000 - 0x5c9d68000
Memory: 22717800k/26476544k available (6589k kernel code, 1333888k absent, 2424856k reserved, 6615k data, 920k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:2048 16
xen: sci override: global_irq=9 trigger=0 polarity=0
xen: registering gsi 9 triggering 0 polarity 0
xen: --> pirq=9 -> irq=9 (gsi=9)
xen: acpi sci 9
xen: --> pirq=1 -> irq=1 (gsi=1)
xen: --> pirq=2 -> irq=2 (gsi=2)
xen: --> pirq=3 -> irq=3 (gsi=3)
xen: --> pirq=4 -> irq=4 (gsi=4)
xen: --> pirq=5 -> irq=5 (gsi=5)
xen: --> pirq=6 -> irq=6 (gsi=6)
xen: --> pirq=7 -> irq=7 (gsi=7)
xen: --> pirq=8 -> irq=8 (gsi=8)
xen_map_pirq_gsi: returning irq 9 for gsi 9
xen: --> pirq=9 -> irq=9 (gsi=9)
xen: --> pirq=10 -> irq=10 (gsi=10)
xen: --> pirq=11 -> irq=11 (gsi=11)
xen: --> pirq=12 -> irq=12 (gsi=12)
xen: --> pirq=13 -> irq=13 (gsi=13)
xen: --> pirq=14 -> irq=14 (gsi=14)
xen: --> pirq=15 -> irq=15 (gsi=15)
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 201326592 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
Detected 3602.262 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 7204.52 BogoMIPS (lpj=14409048)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ACPI: Core revision 20110623
ftrace: allocating 27154 entries in 107 pages
cpu 0 spinlock event irq 297
Performance Events: unsupported p6 CPU model 45 no PMU driver, software events only.
NMI watchdog disabled (cpu0): hardware events not enabled
installing Xen timer for CPU 1
cpu 1 spinlock event irq 303
NMI watchdog disabled (cpu1): hardware events not enabled
installing Xen timer for CPU 2
cpu 2 spinlock event irq 309
NMI watchdog disabled (cpu2): hardware events not enabled
installing Xen timer for CPU 3
cpu 3 spinlock event irq 315
NMI watchdog disabled (cpu3): hardware events not enabled
installing Xen timer for CPU 4
cpu 4 spinlock event irq 321
NMI watchdog disabled (cpu4): hardware events not enabled
installing Xen timer for CPU 5
cpu 5 spinlock event irq 327
NMI watchdog disabled (cpu5): hardware events not enabled
installing Xen timer for CPU 6
cpu 6 spinlock event irq 333
NMI watchdog disabled (cpu6): hardware events not enabled
installing Xen timer for CPU 7
cpu 7 spinlock event irq 339
NMI watchdog disabled (cpu7): hardware events not enabled
Brought up 8 CPUs
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at ae6d7000 (1085440 bytes)
PM: Registering ACPI NVS region at ae917000 (2109440 bytes)
PM: Registering ACPI NVS region at aee0b000 (28672 bytes)
PM: Registering ACPI NVS region at aef4e000 (69632 bytes)
PM: Registering ACPI NVS region at aefd0000 (40960 bytes)
Grant table initialized
print_constraints: dummy:
RTC time: 20:21:01, date: 07/02/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
Freeing initrd memory: 54512k freed
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000aefd1818 0079C (v01 AMI IST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0079C (v01 AMI IST 00000001 MSFT 03000001)
ACPI: SSDT 00000000aefd0c18 00294 (v01 AMI CST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00294 (v01 AMI CST 00000001 MSFT 03000001)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xb0000000-0xfbffffff]
pci 0000:00:00.0: [8086:3c00] type 0 class 0x000600
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: [8086:3c02] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: [8086:3c04] type 1 class 0x000604
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: [8086:3c08] type 1 class 0x000604
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:05.0: [8086:3c28] type 0 class 0x000880
pci 0000:00:05.2: [8086:3c2a] type 0 class 0x000880
pci 0000:00:05.4: [8086:3c2c] type 0 class 0x000800
pci 0000:00:05.4: reg 10: [mem 0xfbf4a000-0xfbf4afff]
pci 0000:00:11.0: [8086:1d3e] type 1 class 0x000604
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: PME# disabled
pci 0000:00:16.0: [8086:1d3a] type 0 class 0x000780
pci 0000:00:16.0: reg 10: [mem 0xfbf49000-0xfbf4900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:19.0: [8086:1503] type 0 class 0x000200
pci 0000:00:19.0: reg 10: [mem 0xfbf00000-0xfbf1ffff]
pci 0000:00:19.0: reg 14: [mem 0xfbf48000-0xfbf48fff]
pci 0000:00:19.0: reg 18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: [8086:1d2d] type 0 class 0x000c03
pci 0000:00:1a.0: reg 10: [mem 0xfbf47000-0xfbf473ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: [8086:1d20] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xfbf20000-0xfbf23fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:1d10] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: [8086:1d12] type 1 class 0x000604
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: [8086:1d16] type 1 class 0x000604
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: [8086:1d18] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: [8086:1d1a] type 1 class 0x000604
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: [8086:1d26] type 0 class 0x000c03
pci 0000:00:1d.0: reg 10: [mem 0xfbf46000-0xfbf463ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:1d41] type 0 class 0x000601
pci 0000:00:1f.2: [8086:1d02] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 24: [mem 0xfbf45000-0xfbf457ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:1d22] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xfbf44000-0xfbf440ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:03:00.0: [1002:6779] type 0 class 0x000300
pci 0000:03:00.0: reg 10: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:03:00.0: reg 18: [mem 0xfbc20000-0xfbc3ffff 64bit]
pci 0000:03:00.0: reg 20: [io 0xc000-0xc0ff]
pci 0000:03:00.0: reg 30: [mem 0xfbc00000-0xfbc1ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.1: [1002:aa98] type 0 class 0x000403
pci 0000:03:00.1: reg 10: [mem 0xfbc40000-0xfbc43fff 64bit]
pci 0000:03:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 03-03]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:01.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:01:00.0: [1002:6739] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfbe20000-0xfbe3ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 30: [mem 0xfbe00000-0xfbe1ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa88] type 0 class 0x000403
pci 0000:01:00.1: reg 10: [mem 0xfbe40000-0xfbe43fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [1002:6758] type 0 class 0x000300
pci 0000:02:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: reg 18: [mem 0xfbd20000-0xfbd3ffff 64bit]
pci 0000:02:00.0: reg 20: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 30: [mem 0xfbd00000-0xfbd1ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.1: [1002:aa90] type 0 class 0x000403
pci 0000:02:00.1: reg 10: [mem 0xfbd40000-0xfbd43fff 64bit]
pci 0000:02:00.1: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:11.0: PCI bridge to [bus 04-04]
pci 0000:00:1c.0: PCI bridge to [bus 05-05]
pci 0000:06:00.0: [1b21:1042] type 0 class 0x000c03
pci 0000:06:00.0: reg 10: [mem 0xfbb00000-0xfbb07fff 64bit]
pci 0000:06:00.0: PME# supported from D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 06-06]
pci 0000:00:1c.1: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:07:00.0: [1b21:1042] type 0 class 0x000c03
pci 0000:07:00.0: reg 10: [mem 0xfba00000-0xfba07fff 64bit]
pci 0000:07:00.0: PME# supported from D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:00:1c.3: PCI bridge to [bus 07-07]
pci 0000:00:1c.3: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:08:00.0: [1b21:0612] type 0 class 0x000106
pci 0000:08:00.0: reg 10: [io 0xb050-0xb057]
pci 0000:08:00.0: reg 14: [io 0xb040-0xb043]
pci 0000:08:00.0: reg 18: [io 0xb030-0xb037]
pci 0000:08:00.0: reg 1c: [io 0xb020-0xb023]
pci 0000:08:00.0: reg 20: [io 0xb000-0xb01f]
pci 0000:08:00.0: reg 24: [mem 0xfb900000-0xfb9001ff]
pci 0000:00:1c.4: PCI bridge to [bus 08-08]
pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.4: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:09:00.0: [1106:3403] type 0 class 0x000c00
pci 0000:09:00.0: reg 10: [mem 0xfb800000-0xfb8007ff 64bit]
pci 0000:09:00.0: reg 18: [io 0xa000-0xa0ff]
pci 0000:09:00.0: supports D2
pci 0000:09:00.0: PME# supported from D2 D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 09-09]
pci 0000:00:1c.5: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.5: bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xb0000000-0xfbffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR33._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x14) granted
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
pci 0000:ff:08.0: [8086:3c80] type 0 class 0x000880
pci 0000:ff:08.3: [8086:3c83] type 0 class 0x000880
pci 0000:ff:08.4: [8086:3c84] type 0 class 0x000880
pci 0000:ff:09.0: [8086:3c90] type 0 class 0x000880
pci 0000:ff:09.3: [8086:3c93] type 0 class 0x000880
pci 0000:ff:09.4: [8086:3c94] type 0 class 0x000880
pci 0000:ff:0a.0: [8086:3cc0] type 0 class 0x000880
pci 0000:ff:0a.1: [8086:3cc1] type 0 class 0x000880
pci 0000:ff:0a.2: [8086:3cc2] type 0 class 0x000880
pci 0000:ff:0a.3: [8086:3cd0] type 0 class 0x000880
pci 0000:ff:0b.0: [8086:3ce0] type 0 class 0x000880
pci 0000:ff:0b.3: [8086:3ce3] type 0 class 0x000880
pci 0000:ff:0c.0: [8086:3ce8] type 0 class 0x000880
pci 0000:ff:0c.1: [8086:3ce8] type 0 class 0x000880
pci 0000:ff:0c.6: [8086:3cf4] type 0 class 0x000880
pci 0000:ff:0c.7: [8086:3cf6] type 0 class 0x000880
pci 0000:ff:0d.0: [8086:3ce8] type 0 class 0x000880
pci 0000:ff:0d.1: [8086:3ce8] type 0 class 0x000880
pci 0000:ff:0d.6: [8086:3cf5] type 0 class 0x000880
pci 0000:ff:0e.0: [8086:3ca0] type 0 class 0x000880
pci 0000:ff:0e.1: [8086:3c46] type 0 class 0x001101
pci 0000:ff:0f.0: [8086:3ca8] type 0 class 0x000880
pci 0000:ff:0f.1: [8086:3c71] type 0 class 0x000880
pci 0000:ff:0f.2: [8086:3caa] type 0 class 0x000880
pci 0000:ff:0f.3: [8086:3cab] type 0 class 0x000880
pci 0000:ff:0f.4: [8086:3cac] type 0 class 0x000880
pci 0000:ff:0f.5: [8086:3cad] type 0 class 0x000880
pci 0000:ff:0f.6: [8086:3cae] type 0 class 0x000880
pci 0000:ff:10.0: [8086:3cb0] type 0 class 0x000880
pci 0000:ff:10.1: [8086:3cb1] type 0 class 0x000880
pci 0000:ff:10.2: [8086:3cb2] type 0 class 0x000880
pci 0000:ff:10.3: [8086:3cb3] type 0 class 0x000880
pci 0000:ff:10.4: [8086:3cb4] type 0 class 0x000880
pci 0000:ff:10.5: [8086:3cb5] type 0 class 0x000880
pci 0000:ff:10.6: [8086:3cb6] type 0 class 0x000880
pci 0000:ff:10.7: [8086:3cb7] type 0 class 0x000880
pci 0000:ff:11.0: [8086:3cb8] type 0 class 0x000880
pci 0000:ff:13.0: [8086:3ce4] type 0 class 0x000880
pci 0000:ff:13.1: [8086:3c43] type 0 class 0x001101
pci 0000:ff:13.4: [8086:3ce6] type 0 class 0x001101
pci 0000:ff:13.5: [8086:3c44] type 0 class 0x001101
pci 0000:ff:13.6: [8086:3c45] type 0 class 0x000880
pci0000:ff: Requesting ACPI _OSC control (0x1d)
pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
xen/balloon: Initialising balloon driver.
xen-balloon: Initialising balloon driver.
xen/balloon: Xen selfballooning driver disabled for domain0.
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
vgaarb: bridge control possible 0000:01:00.0
vgaarb: bridge control possible 0000:03:00.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d000 - 000000000009ffff
reserve RAM buffer: 00000000ae6d7000 - 00000000afffffff
reserve RAM buffer: 00000000aee0b000 - 00000000afffffff
reserve RAM buffer: 00000000aef83000 - 00000000afffffff
reserve RAM buffer: 00000000af000000 - 00000000afffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource xen
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-fe]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x03af window]
pnp 00:00: [io 0x03e0-0x0cf7 window]
pnp 00:00: [io 0x03b0-0x03df window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xb0000000-0xfbffffff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfc000000-0xfcffffff]
pnp 00:01: [mem 0xfd000000-0xfdffffff]
pnp 00:01: [mem 0xfe000000-0xfeafffff]
pnp 00:01: [mem 0xfbfff000-0xfbffffff]
pnp 00:01: [mem 0xfeb00000-0xfebfffff]
pnp 00:01: [mem 0xfed00400-0xfed3ffff]
pnp 00:01: [mem 0xfed45000-0xfedfffff]
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:01: [mem 0xfbfff000-0xfbffffff] has been reserved
system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:01: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:01: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:02: [io 0x0290-0x029f]
pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io 0x0000-0x000f]
pnp 00:03: [io 0x0081-0x0083]
pnp 00:03: [io 0x0087]
pnp 00:03: [io 0x0089-0x008b]
pnp 00:03: [io 0x008f]
pnp 00:03: [io 0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [io 0x0070-0x0071]
xen: registering gsi 8 triggering 1 polarity 0
xen_map_pirq_gsi: returning irq 8 for gsi 8
xen: --> pirq=8 -> irq=8 (gsi=8)
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x0010-0x001f]
pnp 00:06: [io 0x0022-0x003f]
pnp 00:06: [io 0x0044-0x005f]
pnp 00:06: [io 0x0063]
pnp 00:06: [io 0x0065]
pnp 00:06: [io 0x0067-0x006f]
pnp 00:06: [io 0x0072-0x007f]
pnp 00:06: [io 0x0080]
pnp 00:06: [io 0x0084-0x0086]
pnp 00:06: [io 0x0088]
pnp 00:06: [io 0x008c-0x008e]
pnp 00:06: [io 0x0090-0x009f]
pnp 00:06: [io 0x00a2-0x00bf]
pnp 00:06: [io 0x00e0-0x00ef]
pnp 00:06: [io 0x04d0-0x04d1]
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io 0x00f0-0x00ff]
xen: registering gsi 13 triggering 1 polarity 0
xen_map_pirq_gsi: returning irq 13 for gsi 13
xen: --> pirq=13 -> irq=13 (gsi=13)
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [io 0x03f8-0x03ff]
xen: registering gsi 4 triggering 1 polarity 0
xen_map_pirq_gsi: returning irq 4 for gsi 4
xen: --> pirq=4 -> irq=4 (gsi=4)
pnp 00:08: [irq 4]
pnp 00:08: [dma 0 disabled]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [io 0x0400-0x0453]
pnp 00:09: [io 0x0458-0x047f]
pnp 00:09: [io 0x1180-0x119f]
pnp 00:09: [io 0x0500-0x057f]
pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
pnp 00:09: [mem 0xfec00000-0xfecfffff]
pnp 00:09: [mem 0xfed08000-0xfed08fff]
pnp 00:09: [mem 0xff000000-0xffffffff]
system 00:09: [io 0x0400-0x0453] has been reserved
system 00:09: [io 0x0458-0x047f] has been reserved
system 00:09: [io 0x1180-0x119f] has been reserved
system 00:09: [io 0x0500-0x057f] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0a: [io 0x0454-0x0457]
system 00:0a: [io 0x0454-0x0457] has been reserved
system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0b: [mem 0xfed00000-0xfed003ff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0c: [bus ff]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pciback 0000:00:1a.0: seizing device
pciback 0000:01:00.0: seizing device
pciback 0000:01:00.1: seizing device
pciback 0000:02:00.0: seizing device
pciback 0000:02:00.1: seizing device
pciback 0000:06:00.0: seizing device
pciback 0000:07:00.0: seizing device
PM-Timer failed consistency check (0x0xffffff) - aborting.
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:01.0: PCI bridge to [bus 03-03]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:01.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:11.0: PCI bridge to [bus 04-04]
pci 0000:00:1c.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.1: PCI bridge to [bus 06-06]
pci 0000:00:1c.1: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1c.3: PCI bridge to [bus 07-07]
pci 0000:00:1c.3: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:1c.4: PCI bridge to [bus 08-08]
pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.4: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:00:1c.5: PCI bridge to [bus 09-09]
pci 0000:00:1c.5: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.5: bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
xen: registering gsi 27 triggering 0 polarity 1
xen: --> pirq=27 -> irq=27 (gsi=27)
pci 0000:00:01.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
pci 0000:00:01.0: setting latency timer to 64
xen: registering gsi 33 triggering 0 polarity 1
xen: --> pirq=33 -> irq=33 (gsi=33)
pci 0000:00:02.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33
pci 0000:00:02.0: setting latency timer to 64
xen: registering gsi 41 triggering 0 polarity 1
xen: --> pirq=41 -> irq=41 (gsi=41)
pci 0000:00:03.0: PCI INT A -> GSI 41 (level, low) -> IRQ 41
pci 0000:00:03.0: setting latency timer to 64
xen: registering gsi 16 triggering 0 polarity 1
xen: --> pirq=16 -> irq=16 (gsi=16)
pci 0000:00:11.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:11.0: setting latency timer to 64
xen: registering gsi 17 triggering 0 polarity 1
xen: --> pirq=17 -> irq=17 (gsi=17)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
xen: registering gsi 16 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 16 for gsi 16
xen: --> pirq=16 -> irq=16 (gsi=16)
Already setup the GSI :16
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
xen: registering gsi 19 triggering 0 polarity 1
xen: --> pirq=19 -> irq=19 (gsi=19)
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
xen: registering gsi 17 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 17 for gsi 17
xen: --> pirq=17 -> irq=17 (gsi=17)
Already setup the GSI :17
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
xen: registering gsi 16 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 16 for gsi 16
xen: --> pirq=16 -> irq=16 (gsi=16)
Already setup the GSI :16
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xb0000000-0xfbffffff]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:03: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:07: resource 1 [mem 0xfba00000-0xfbafffff]
pci_bus 0000:08: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:08: resource 1 [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:09: resource 0 [io 0xa000-0xafff]
pci_bus 0000:09: resource 1 [mem 0xfb800000-0xfb8fffff]
pci_bus 0000:0a: resource 4 [io 0x0000-0x03af]
pci_bus 0000:0a: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:0a: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:0a: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:0a: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0a: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:0a: resource 10 [mem 0xb0000000-0xfbffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
xen: registering gsi 23 triggering 0 polarity 1
xen: --> pirq=23 -> irq=23 (gsi=23)
pciback 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pciback 0000:00:1a.0: PCI INT A disabled
xen: registering gsi 23 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 23 for gsi 23
xen: --> pirq=23 -> irq=23 (gsi=23)
Already setup the GSI :23
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pciback 0000:01:00.0: Boot video device
xen: registering gsi 17 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 17 for gsi 17
xen: --> pirq=17 -> irq=17 (gsi=17)
Already setup the GSI :17
pciback 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pciback 0000:06:00.0: PCI INT A disabled
xen: registering gsi 19 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 19 for gsi 19
xen: --> pirq=19 -> irq=19 (gsi=19)
Already setup the GSI :19
pciback 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pciback 0000:07:00.0: PCI INT A disabled
PCI: CLS 64 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1341260461.857:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 32768
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:03.0: setting latency timer to 64
pcieport 0000:00:11.0: setting latency timer to 64
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pciback 0000:01:00.0: Signaling PME through PCIe PME interrupt
pciback 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pciback 0000:02:00.0: Signaling PME through PCIe PME interrupt
pciback 0000:02:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:11.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:11.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pciback 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pciback 0000:07:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Table is not found!
GHES: HEST is not enabled!
xen: registering gsi 19 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 19 for gsi 19
xen: --> pirq=19 -> irq=19 (gsi=19)
Already setup the GSI :19
pciback 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pciback 0000:07:00.0: PCI INT A disabled
xen: registering gsi 17 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 17 for gsi 17
xen: --> pirq=17 -> irq=17 (gsi=17)
Already setup the GSI :17
pciback 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pciback 0000:06:00.0: PCI INT A disabled
xen: registering gsi 44 triggering 0 polarity 1
xen: --> pirq=44 -> irq=44 (gsi=44)
pciback 0000:02:00.1: PCI INT B -> GSI 44 (level, low) -> IRQ 44
pciback 0000:02:00.1: PCI INT B disabled
pciback 0000:02:00.0: enabling device (0000 -> 0003)
xen: registering gsi 40 triggering 0 polarity 1
xen: --> pirq=40 -> irq=40 (gsi=40)
pciback 0000:02:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
pciback 0000:02:00.0: PCI INT A disabled
xen: registering gsi 36 triggering 0 polarity 1
xen: --> pirq=36 -> irq=36 (gsi=36)
pciback 0000:01:00.1: PCI INT B -> GSI 36 (level, low) -> IRQ 36
pciback 0000:01:00.1: PCI INT B disabled
xen: registering gsi 32 triggering 0 polarity 1
xen: --> pirq=32 -> irq=32 (gsi=32)
pciback 0000:01:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
pciback 0000:01:00.0: PCI INT A disabled
xen: registering gsi 23 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 23 for gsi 23
xen: --> pirq=23 -> irq=23 (gsi=23)
Already setup the GSI :23
pciback 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pciback 0000:00:1a.0: PCI INT A disabled
xen-pciback: backend is vpci
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
hpet_acpi_add: no address or irqs in _CRS
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
xen: registering gsi 20 triggering 0 polarity 1
xen: --> pirq=20 -> irq=20 (gsi=20)
ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x23 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfbf45000 port 0xfbf45100 irq 355
ata2: SATA max UDMA/133 abar m2048@0xfbf45000 port 0xfbf45180 irq 355
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xfbf45000 port 0xfbf45380 irq 355
xen: registering gsi 16 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 16 for gsi 16
xen: --> pirq=16 -> irq=16 (gsi=16)
Already setup the GSI :16
ahci 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:08:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:08:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
ahci 0000:08:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xfb900000 port 0xfb900100 irq 356
ata8: SATA max UDMA/133 abar m512@0xfb900000 port 0xfb900180 irq 356
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
xen: registering gsi 23 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 23 for gsi 23
xen: --> pirq=23 -> irq=23 (gsi=23)
Already setup the GSI :23
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbf46000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 4:101:396
rtc_cmos 00:04: setting system clock to 2012-07-02 20:21:02 UTC (1341260462)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata7: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: ST1000DM003-9YN162, CC4D, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST1000DM003-9YN1 CC4D PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-1: new high-speed USB device number 2 using ehci_hcd
sda: sda2 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-8: OCZ-VERTEX3, 2.15, max UDMA/133
ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA OCZ-VERTEX3 2.15 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 < sdb5 sdb6 >
sd 1:0:0:0: [sdb] Attached SCSI disk
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATAPI: HL-DT-ST DVDRAM GH24NS90, IN00, max UDMA/100
ata6.00: configured for UDMA/100
scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NS90 IN00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg2 type 5
ata8: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 920k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1584k freed
Freeing unused kernel memory: 1188k freed
udevd[135]: starting version 175
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:03:00.0: enabling device (0000 -> 0003)
xen: registering gsi 26 triggering 0 polarity 1
xen: --> pirq=26 -> irq=26 (gsi=26)
radeon 0000:03:00.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
radeon 0000:03:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x174B:0xE164).
[drm] register mmio base: 0xFBC20000
[drm] register mmio size: 131072
e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
xen: registering gsi 18 triggering 0 polarity 1
xen: --> pirq=18 -> irq=18 (gsi=18)
e1000e 0000:00:19.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
e1000e 0000:00:19.0: setting latency timer to 64
xen: registering gsi 17 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 17 for gsi 17
xen: --> pirq=17 -> irq=17 (gsi=17)
Already setup the GSI :17
firewire_ohci 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
firewire_ohci 0000:09:00.0: setting latency timer to 64
firewire_ohci: Added fw-ohci device 0000:09:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
ATOM BIOS: AMD
[drm] GPU not posted. posting now...
radeon 0000:03:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:03:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 11388002 kiB.
[TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:03:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading CAICOS Microcode
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:03:00.0: WB enabled
[drm] ring test succeeded in 3 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A
[drm] HPD2
[drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] DVI-D
[drm] HPD4
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] VGA
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Internal thermal controller without fan control
[drm] radeon: power management initialized
No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
[drm] fb mappable at 0xB0142000
[drm] vram apper at 0xB0000000
[drm] size 3145728
[drm] fb depth is 24
[drm] pitch is 4096
Console: switching to colour frame buffer device 128x48
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.12.0 20080528 for 0000:03:00.0 on minor 0
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) c8:60:00:9f:10:57
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
firewire_core: created device fw0: GUID 001e8c00004ee80e, S400
EXT4-fs (sdb5): INFO: recovery required on readonly filesystem
EXT4-fs (sdb5): write access will be enabled during recovery
EXT4-fs (sdb5): recovery complete
EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[509]: starting version 175
lp: driver loaded but no devices found
EDAC MC: Ver: 2.1.0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input2
Adding 4144124k swap on /dev/sdb6. Priority:-1 extents:1 across:4144124k SS
mei: module is from the staging directory, the quality is unknown, you have been warned.
xen: registering gsi 16 triggering 0 polarity 1
xen_map_pirq_gsi: returning irq 16 for gsi 16
xen: --> pirq=16 -> irq=16 (gsi=16)
Already setup the GSI :16
mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
mei 0000:00:16.0: setting latency timer to 64
type=1400 audit(1341260467.471:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=756 comm="apparmor_parser"
type=1400 audit(1341260467.475:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=756 comm="apparmor_parser"
type=1400 audit(1341260467.475:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=756 comm="apparmor_parser"
xen: registering gsi 22 triggering 0 polarity 1
xen: --> pirq=22 -> irq=22 (gsi=22)
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
udevd[537]: renamed network interface eth0 to eth1
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Line-Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
xen: registering gsi 28 triggering 0 polarity 1
xen: --> pirq=28 -> irq=28 (gsi=28)
snd_hda_intel 0000:03:00.1: PCI INT B -> GSI 28 (level, low) -> IRQ 28
snd_hda_intel 0000:03:00.1: setting latency timer to 64
HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:03:00.1/sound/card1/input11
EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
init: failsafe main process (1073) killed by TERM signal
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
init: network-manager main process (1123) terminated with status 127
init: network-manager main process ended, respawning
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1341260467.783:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1165 comm="apparmor_parser"
type=1400 audit(1341260467.783:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1165 comm="apparmor_parser"
type=1400 audit(1341260467.795:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1182 comm="apparmor_parser"
type=1400 audit(1341260467.795:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=1185 comm="apparmor_parser"
type=1400 audit(1341260467.799:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1182 comm="apparmor_parser"
type=1400 audit(1341260467.799:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1182 comm="apparmor_parser"
type=1400 audit(1341260467.799:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=1188 comm="apparmor_parser"
init: gdm main process (1261) killed by TERM signal
vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=none
Event-channel device installed.
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
XENBUS: Unable to read cpu state
Bridge firewalling registered
Ebtables v2.0 registered
ip_tables: (C) 2000-2006 Netfilter Core Team
ADDRCONF(NETDEV_UP): peth1: link is not ready
ip6_tables: (C) 2000-2006 Netfilter Core Team
e1000e: peth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0: peth1: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): peth1: link becomes ready
device peth1 entered promiscuous mode
eth1: port 1(peth1) entering forwarding state
eth1: port 1(peth1) entering forwarding state
init: plymouth-stop pre-start process (2548) terminated with status 1
device vif1.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif1.0: link is not ready
eth1: port 1(peth1) entering forwarding state
eth1: port 1(peth1) entering forwarding state
eth1: port 1(peth1) entering forwarding state
eth1: port 1(peth1) entering forwarding state
eth1: port 1(peth1) entering forwarding state
eth1: port 1(peth1) entering forwarding state
device tap1.0 entered promiscuous mode
eth1: port 3(tap1.0) entering forwarding state
eth1: port 3(tap1.0) entering forwarding state
eth1: port 3(tap1.0) entering forwarding state
eth1: port 3(tap1.0) entering forwarding state
eth1: port 3(tap1.0) entering forwarding state
xen-pciback: vpci: 0000:00:1a.0: assign to virtual slot 0
xen-pciback: vpci: 0000:01:00.0: assign to virtual slot 1
xen-pciback: vpci: 0000:01:00.1: assign to virtual slot 1 func 1
peth1: no IPv6 routers present
show_signal_msg: 45 callbacks suppressed
gnome-settings-[3346]: segfault at 8 ip 00007fb1d6b1bc1a sp 00007fffa75ca460 error 4 in libpower.so[7fb1d6b11000+18000]
device vif2.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif2.0: link is not ready
gnome-settings-[3887]: segfault at 8 ip 00007f8122d3bc1a sp 00007fff34f48ee0 error 4 in libpower.so[7f8122d31000+18000]
eth1: no IPv6 routers present
device tap2.0 entered promiscuous mode
eth1: port 5(tap2.0) entering forwarding state
eth1: port 5(tap2.0) entering forwarding state
tap1.0: no IPv6 routers present
eth1: port 5(tap2.0) entering forwarding state
eth1: port 5(tap2.0) entering forwarding state
eth1: port 5(tap2.0) entering forwarding state
xen-pciback: vpci: 0000:02:00.0: assign to virtual slot 0
xen-pciback: vpci: 0000:02:00.1: assign to virtual slot 0 func 1
xen-pciback: vpci: 0000:06:00.0: assign to virtual slot 1
xen-pciback: vpci: 0000:07:00.0: assign to virtual slot 2
eth1: port 5(tap2.0) entering forwarding state
eth1: port 5(tap2.0) entering disabled state
eth1: port 5(tap2.0) entering disabled state
xen-blkback:ring-ref 8, event-channel 59, protocol 1 (x86_64-abi)
xen-blkback:ring-ref 9, event-channel 60, protocol 1 (x86_64-abi)
ADDRCONF(NETDEV_CHANGE): vif2.0: link becomes ready
eth1: port 4(vif2.0) entering forwarding state
eth1: port 4(vif2.0) entering forwarding state
vif2.0: no IPv6 routers present
eth1: port 3(tap1.0) entering forwarding state
eth1: port 3(tap1.0) entering disabled state
eth1: port 2(vif1.0) entering disabled state
eth1: port 2(vif1.0) entering disabled state
device tap3.0 entered promiscuous mode
eth1: port 2(tap3.0) entering forwarding state
eth1: port 2(tap3.0) entering forwarding state
device vif3.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif3.0: link is not ready
eth1: port 2(tap3.0) entering forwarding state
eth1: port 2(tap3.0) entering forwarding state
eth1: port 2(tap3.0) entering forwarding state
tap3.0: no IPv6 routers present
eth1: port 2(tap3.0) entering forwarding state
eth1: port 2(tap3.0) entering disabled state
eth1: port 2(tap3.0) entering disabled state
xen-blkback:ring-ref 8, event-channel 59, protocol 1 (x86_64-abi)
ADDRCONF(NETDEV_CHANGE): vif3.0: link becomes ready
eth1: port 3(vif3.0) entering forwarding state
eth1: port 3(vif3.0) entering forwarding state
vif3.0: no IPv6 routers present
xen-pciback: vpci: 0000:00:1a.0: assign to virtual slot 0
pciback 0000:00:1a.0: device has been assigned to another domain! Over-writting the ownership, but beware.
eth1: port 3(vif3.0) entering forwarding state
eth1: port 3(vif3.0) entering disabled state
device vif4.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif4.0: link is not ready
device tap4.0 entered promiscuous mode
eth1: port 3(tap4.0) entering forwarding state
eth1: port 3(tap4.0) entering forwarding state
eth1: port 3(tap4.0) entering forwarding state
eth1: port 3(tap4.0) entering forwarding state
eth1: port 3(tap4.0) entering forwarding state
xen-pciback: vpci: 0000:00:1a.0: assign to virtual slot 0
pciback 0000:00:1a.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:01:00.0: assign to virtual slot 1
pciback 0000:01:00.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:01:00.1: assign to virtual slot 1 func 1
pciback 0000:01:00.1: device has been assigned to another domain! Over-writting the ownership, but beware.
eth1: port 3(tap4.0) entering forwarding state
eth1: port 3(tap4.0) entering disabled state
eth1: port 3(tap4.0) entering disabled state
xen-blkback:ring-ref 8, event-channel 59, protocol 1 (x86_64-abi)
ADDRCONF(NETDEV_CHANGE): vif4.0: link becomes ready
eth1: port 2(vif4.0) entering forwarding state
eth1: port 2(vif4.0) entering forwarding state
vif4.0: no IPv6 routers present
eth1: port 2(vif4.0) entering forwarding state
eth1: port 2(vif4.0) entering disabled state
usb 1-1.3: new full-speed USB device number 3 using ehci_hcd
hub 1-1.3:1.0: USB hub found
hub 1-1.3:1.0: 4 ports detected
usb 1-1.3.1: new low-speed USB device number 4 using ehci_hcd
input: Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.0/input/input12
generic-usb 0003:046D:C221.0001: input,hidraw0: USB HID v1.10 Keyboard [Gaming Keyboard] on usb-0000:00:1d.0-1.3.1/input0
input: Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.1/input/input13
generic-usb 0003:046D:C221.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [Gaming Keyboard] on usb-0000:00:1d.0-1.3.1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 1-1.3.2: new full-speed USB device number 5 using ehci_hcd
input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.0/input/input14
generic-usb 0003:046D:C068.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:1d.0-1.3.2/input0
input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.1/input/input15
generic-usb 0003:046D:C068.0004: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:1d.0-1.3.2/input1
usb 1-1.3.4: new full-speed USB device number 6 using ehci_hcd
input: G11 Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3.4/1-1.3.4:1.0/input/input16
generic-usb 0003:046D:C225.0005: input,hiddev0,hidraw4: USB HID v1.11 Keypad [G11 Keyboard] on usb-0000:00:1d.0-1.3.4/input0
device tap5.0 entered promiscuous mode
eth1: port 2(tap5.0) entering forwarding state
eth1: port 2(tap5.0) entering forwarding state
eth1: port 2(tap5.0) entering forwarding state
device vif5.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif5.0: link is not ready
eth1: port 2(tap5.0) entering forwarding state
eth1: port 2(tap5.0) entering forwarding state
eth1: port 2(tap5.0) entering forwarding state
eth1: port 2(tap5.0) entering disabled state
eth1: port 2(tap5.0) entering disabled state
xen-blkback:ring-ref 8, event-channel 59, protocol 1 (x86_64-abi)
ADDRCONF(NETDEV_CHANGE): vif5.0: link becomes ready
eth1: port 3(vif5.0) entering forwarding state
eth1: port 3(vif5.0) entering forwarding state
vif5.0: no IPv6 routers present
eth1: port 3(vif5.0) entering forwarding state
eth1: port 3(vif5.0) entering disabled state
device vif6.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif6.0: link is not ready
device tap6.0 entered promiscuous mode
eth1: port 3(tap6.0) entering forwarding state
eth1: port 3(tap6.0) entering forwarding state
eth1: port 3(tap6.0) entering forwarding state
eth1: port 3(tap6.0) entering forwarding state
eth1: port 3(tap6.0) entering forwarding state
xen-pciback: vpci: 0000:00:1a.0: assign to virtual slot 0
pciback 0000:00:1a.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:01:00.0: assign to virtual slot 1
pciback 0000:01:00.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:01:00.1: assign to virtual slot 1 func 1
pciback 0000:01:00.1: device has been assigned to another domain! Over-writting the ownership, but beware.
eth1: port 3(tap6.0) entering forwarding state
eth1: port 3(tap6.0) entering disabled state
eth1: port 3(tap6.0) entering disabled state
xen-blkback:ring-ref 8, event-channel 59, protocol 1 (x86_64-abi)
ADDRCONF(NETDEV_CHANGE): vif6.0: link becomes ready
eth1: port 2(vif6.0) entering forwarding state
eth1: port 2(vif6.0) entering forwarding state
vif6.0: no IPv6 routers present
usb 1-1.3: USB disconnect, device number 3
usb 1-1.3.1: USB disconnect, device number 4
usb 1-1.3.2: USB disconnect, device number 5
usb 1-1.3.4: USB disconnect, device number 6
eth1: port 2(vif6.0) entering forwarding state
eth1: port 2(vif6.0) entering disabled state
device vif7.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif7.0: link is not ready
device tap7.0 entered promiscuous mode
eth1: port 3(tap7.0) entering forwarding state
eth1: port 3(tap7.0) entering forwarding state
eth1: port 3(tap7.0) entering forwarding state
eth1: port 3(tap7.0) entering forwarding state
eth1: port 3(tap7.0) entering forwarding state
xen-pciback: vpci: 0000:00:1a.0: assign to virtual slot 0
pciback 0000:00:1a.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:01:00.0: assign to virtual slot 1
pciback 0000:01:00.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:01:00.1: assign to virtual slot 1 func 1
pciback 0000:01:00.1: device has been assigned to another domain! Over-writting the ownership, but beware.
eth1: port 3(tap7.0) entering forwarding state
eth1: port 3(tap7.0) entering disabled state
eth1: port 3(tap7.0) entering disabled state
xen-blkback:ring-ref 8, event-channel 59, protocol 1 (x86_64-abi)
ADDRCONF(NETDEV_CHANGE): vif7.0: link becomes ready
eth1: port 2(vif7.0) entering forwarding state
eth1: port 2(vif7.0) entering forwarding state
vif7.0: no IPv6 routers present
eth1: port 2(vif7.0) entering forwarding state
eth1: port 2(vif7.0) entering disabled state
device vif8.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif8.0: link is not ready
device tap8.0 entered promiscuous mode
eth1: port 3(tap8.0) entering forwarding state
eth1: port 3(tap8.0) entering forwarding state
eth1: port 3(tap8.0) entering forwarding state
eth1: port 3(tap8.0) entering forwarding state
eth1: port 3(tap8.0) entering forwarding state
xen-pciback: vpci: 0000:00:1a.0: assign to virtual slot 0
pciback 0000:00:1a.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:01:00.0: assign to virtual slot 1
pciback 0000:01:00.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:01:00.1: assign to virtual slot 1 func 1
pciback 0000:01:00.1: device has been assigned to another domain! Over-writting the ownership, but beware.
tap8.0: no IPv6 routers present
irq 23: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper/0 Tainted: G C 3.2.0-24-i7 #38
Call Trace:
[] __report_bad_irq+0x3d/0xe0
[] note_interrupt+0x135/0x190
[] ? xen_restore_fl_direct_reloc+0x4/0x4
[] ? usb_hcd_irq+0x6b/0x80
[] handle_irq_event_percpu+0xa9/0x220
[] handle_irq_event+0x51/0x80
[] handle_fasteoi_irq+0x6a/0x110
[] __xen_evtchn_do_upcall+0x199/0x250
[] xen_evtchn_do_upcall+0x2f/0x50
[] xen_do_hypervisor_callback+0x1e/0x30
[] ? hypercall_page+0x3aa/0x1000
[] ? hypercall_page+0x3aa/0x1000
[] ? xen_safe_halt+0x10/0x20
[] ? default_idle+0x53/0x1d0
[] ? cpu_idle+0xd6/0x120
[] ? rest_init+0x72/0x74
[] ? start_kernel+0x3ba/0x3c7
[] ? x86_64_start_reservations+0x132/0x136
[] ? xen_start_kernel+0x5bc/0x5c3
handlers:
[] usb_hcd_irq
Disabling IRQ #23
eth1: port 3(tap8.0) entering forwarding state
eth1: port 3(tap8.0) entering disabled state
eth1: port 3(tap8.0) entering disabled state
eth1: port 2(vif8.0) entering disabled state
eth1: port 2(vif8.0) entering disabled state
device vif9.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif9.0: link is not ready
device tap9.0 entered promiscuous mode
eth1: port 3(tap9.0) entering forwarding state
eth1: port 3(tap9.0) entering forwarding state
eth1: port 3(tap9.0) entering forwarding state
eth1: port 3(tap9.0) entering forwarding state
eth1: port 3(tap9.0) entering forwarding state
xen-pciback: vpci: 0000:00:1a.0: assign to virtual slot 0
pciback 0000:00:1a.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:01:00.0: assign to virtual slot 1
pciback 0000:01:00.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:01:00.1: assign to virtual slot 1 func 1
pciback 0000:01:00.1: device has been assigned to another domain! Over-writting the ownership, but beware.
eth1: port 3(tap9.0) entering forwarding state
eth1: port 3(tap9.0) entering disabled state
eth1: port 3(tap9.0) entering disabled state
xen-blkback:ring-ref 8, event-channel 59, protocol 1 (x86_64-abi)
ADDRCONF(NETDEV_CHANGE): vif9.0: link becomes ready
eth1: port 2(vif9.0) entering forwarding state
eth1: port 2(vif9.0) entering forwarding state
vif9.0: no IPv6 routers present
eth1: port 2(vif9.0) entering forwarding state
eth1: port 2(vif9.0) entering disabled state
device vif10.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif10.0: link is not ready
device tap10.0 entered promiscuous mode
eth1: port 3(tap10.0) entering forwarding state
eth1: port 3(tap10.0) entering forwarding state
eth1: port 3(tap10.0) entering forwarding state
eth1: port 3(tap10.0) entering forwarding state
eth1: port 3(tap10.0) entering forwarding state
xen-pciback: vpci: 0000:00:1a.0: assign to virtual slot 0
pciback 0000:00:1a.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:01:00.0: assign to virtual slot 1
pciback 0000:01:00.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:01:00.1: assign to virtual slot 1 func 1
pciback 0000:01:00.1: device has been assigned to another domain! Over-writting the ownership, but beware.
eth1: port 3(tap10.0) entering forwarding state
eth1: port 3(tap10.0) entering disabled state
eth1: port 3(tap10.0) entering disabled state
xen-blkback:ring-ref 8, event-channel 59, protocol 1 (x86_64-abi)
ADDRCONF(NETDEV_CHANGE): vif10.0: link becomes ready
eth1: port 2(vif10.0) entering forwarding state
eth1: port 2(vif10.0) entering forwarding state
vif10.0: no IPv6 routers present
eth1: port 2(vif10.0) entering forwarding state
eth1: port 2(vif10.0) entering disabled state
eth1: port 4(vif2.0) entering forwarding state
eth1: port 4(vif2.0) entering disabled state
device vif11.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif11.0: link is not ready
device tap11.0 entered promiscuous mode
eth1: port 3(tap11.0) entering forwarding state
eth1: port 3(tap11.0) entering forwarding state
eth1: port 3(tap11.0) entering forwarding state
eth1: port 3(tap11.0) entering forwarding state
eth1: port 3(tap11.0) entering forwarding state
xen-pciback: vpci: 0000:00:1a.0: assign to virtual slot 0
pciback 0000:00:1a.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:01:00.0: assign to virtual slot 1
pciback 0000:01:00.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:01:00.1: assign to virtual slot 1 func 1
pciback 0000:01:00.1: device has been assigned to another domain! Over-writting the ownership, but beware.
eth1: port 3(tap11.0) entering forwarding state
eth1: port 3(tap11.0) entering disabled state
eth1: port 3(tap11.0) entering disabled state
xen-blkback:ring-ref 8, event-channel 59, protocol 1 (x86_64-abi)
ADDRCONF(NETDEV_CHANGE): vif11.0: link becomes ready
eth1: port 2(vif11.0) entering forwarding state
eth1: port 2(vif11.0) entering forwarding state
vif11.0: no IPv6 routers present
device vif12.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif12.0: link is not ready
device tap12.0 entered promiscuous mode
eth1: port 4(tap12.0) entering forwarding state
eth1: port 4(tap12.0) entering forwarding state
eth1: port 4(tap12.0) entering forwarding state
eth1: port 4(tap12.0) entering forwarding state
eth1: port 4(tap12.0) entering forwarding state
xen-pciback: vpci: 0000:02:00.0: assign to virtual slot 0
pciback 0000:02:00.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:02:00.1: assign to virtual slot 0 func 1
pciback 0000:02:00.1: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:06:00.0: assign to virtual slot 1
pciback 0000:06:00.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:07:00.0: assign to virtual slot 2
pciback 0000:07:00.0: device has been assigned to another domain! Over-writting the ownership, but beware.
eth1: port 4(tap12.0) entering forwarding state
eth1: port 4(tap12.0) entering disabled state
eth1: port 4(tap12.0) entering disabled state
xen-blkback:ring-ref 8, event-channel 59, protocol 1 (x86_64-abi)
xen-blkback:ring-ref 9, event-channel 60, protocol 1 (x86_64-abi)
ADDRCONF(NETDEV_CHANGE): vif12.0: link becomes ready
eth1: port 3(vif12.0) entering forwarding state
eth1: port 3(vif12.0) entering forwarding state
vif12.0: no IPv6 routers present
eth1: port 2(vif11.0) entering forwarding state
eth1: port 2(vif11.0) entering disabled state
eth1: port 3(vif12.0) entering forwarding state
eth1: port 3(vif12.0) entering disabled state
device vif13.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif13.0: link is not ready
device tap13.0 entered promiscuous mode
eth1: port 3(tap13.0) entering forwarding state
eth1: port 3(tap13.0) entering forwarding state
eth1: port 3(tap13.0) entering forwarding state
eth1: port 3(tap13.0) entering forwarding state
eth1: port 3(tap13.0) entering forwarding state
xen-pciback: vpci: 0000:00:1a.0: assign to virtual slot 0
pciback 0000:00:1a.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:01:00.0: assign to virtual slot 1
pciback 0000:01:00.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:01:00.1: assign to virtual slot 1 func 1
pciback 0000:01:00.1: device has been assigned to another domain! Over-writting the ownership, but beware.
device vif14.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif14.0: link is not ready
device tap14.0 entered promiscuous mode
eth1: port 5(tap14.0) entering forwarding state
eth1: port 5(tap14.0) entering forwarding state
eth1: port 5(tap14.0) entering forwarding state
eth1: port 5(tap14.0) entering forwarding state
eth1: port 5(tap14.0) entering forwarding state
xen-pciback: vpci: 0000:02:00.0: assign to virtual slot 0
pciback 0000:02:00.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:02:00.1: assign to virtual slot 0 func 1
pciback 0000:02:00.1: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:06:00.0: assign to virtual slot 1
pciback 0000:06:00.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:07:00.0: assign to virtual slot 2
pciback 0000:07:00.0: device has been assigned to another domain! Over-writting the ownership, but beware.
tap13.0: no IPv6 routers present
eth1: port 5(tap14.0) entering forwarding state
eth1: port 5(tap14.0) entering disabled state
eth1: port 5(tap14.0) entering disabled state
xen-blkback:ring-ref 8, event-channel 59, protocol 1 (x86_64-abi)
xen-blkback:ring-ref 9, event-channel 60, protocol 1 (x86_64-abi)
ADDRCONF(NETDEV_CHANGE): vif14.0: link becomes ready
eth1: port 4(vif14.0) entering forwarding state
eth1: port 4(vif14.0) entering forwarding state
vif14.0: no IPv6 routers present
eth1: port 4(vif14.0) entering forwarding state
eth1: port 4(vif14.0) entering disabled state
device vif15.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif15.0: link is not ready
device tap15.0 entered promiscuous mode
eth1: port 5(tap15.0) entering forwarding state
eth1: port 5(tap15.0) entering forwarding state
eth1: port 5(tap15.0) entering forwarding state
eth1: port 5(tap15.0) entering forwarding state
eth1: port 5(tap15.0) entering forwarding state
xen-pciback: vpci: 0000:02:00.0: assign to virtual slot 0
pciback 0000:02:00.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:02:00.1: assign to virtual slot 0 func 1
pciback 0000:02:00.1: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:06:00.0: assign to virtual slot 1
pciback 0000:06:00.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:07:00.0: assign to virtual slot 2
pciback 0000:07:00.0: device has been assigned to another domain! Over-writting the ownership, but beware.
tap15.0: no IPv6 routers present
eth1: port 5(tap15.0) entering forwarding state
eth1: port 5(tap15.0) entering disabled state
eth1: port 5(tap15.0) entering disabled state
xen-blkback:ring-ref 8, event-channel 59, protocol 1 (x86_64-abi)
xen-blkback:ring-ref 9, event-channel 60, protocol 1 (x86_64-abi)
ADDRCONF(NETDEV_CHANGE): vif15.0: link becomes ready
eth1: port 4(vif15.0) entering forwarding state
eth1: port 4(vif15.0) entering forwarding state
vif15.0: no IPv6 routers present
hrtimer: interrupt took 90253584 ns
eth1: port 3(tap13.0) entering forwarding state
eth1: port 3(tap13.0) entering disabled state
eth1: port 3(tap13.0) entering disabled state
eth1: port 2(vif13.0) entering disabled state
eth1: port 2(vif13.0) entering disabled state
device vif16.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif16.0: link is not ready
device tap16.0 entered promiscuous mode
eth1: port 3(tap16.0) entering forwarding state
eth1: port 3(tap16.0) entering forwarding state
eth1: port 3(tap16.0) entering forwarding state
eth1: port 3(tap16.0) entering forwarding state
eth1: port 3(tap16.0) entering forwarding state
xen-pciback: vpci: 0000:00:1a.0: assign to virtual slot 0
pciback 0000:00:1a.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:01:00.0: assign to virtual slot 1
pciback 0000:01:00.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:01:00.1: assign to virtual slot 1 func 1
pciback 0000:01:00.1: device has been assigned to another domain! Over-writting the ownership, but beware.
tap16.0: no IPv6 routers present
eth1: port 3(tap16.0) entering forwarding state
eth1: port 3(tap16.0) entering disabled state
eth1: port 3(tap16.0) entering disabled state
eth1: port 2(vif16.0) entering disabled state
eth1: port 2(vif16.0) entering disabled state
device vif17.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif17.0: link is not ready
device tap17.0 entered promiscuous mode
eth1: port 3(tap17.0) entering forwarding state
eth1: port 3(tap17.0) entering forwarding state
eth1: port 3(tap17.0) entering forwarding state
eth1: port 3(tap17.0) entering forwarding state
eth1: port 3(tap17.0) entering forwarding state
xen-pciback: vpci: 0000:00:1a.0: assign to virtual slot 0
pciback 0000:00:1a.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:01:00.0: assign to virtual slot 1
pciback 0000:01:00.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:01:00.1: assign to virtual slot 1 func 1
pciback 0000:01:00.1: device has been assigned to another domain! Over-writting the ownership, but beware.
tap17.0: no IPv6 routers present
eth1: port 3(tap17.0) entering forwarding state
eth1: port 3(tap17.0) entering disabled state
eth1: port 3(tap17.0) entering disabled state
eth1: port 2(vif17.0) entering disabled state
eth1: port 2(vif17.0) entering disabled state
device vif18.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif18.0: link is not ready
device tap18.0 entered promiscuous mode
eth1: port 3(tap18.0) entering forwarding state
eth1: port 3(tap18.0) entering forwarding state
eth1: port 3(tap18.0) entering forwarding state
eth1: port 3(tap18.0) entering forwarding state
eth1: port 3(tap18.0) entering forwarding state
xen-pciback: vpci: 0000:00:1a.0: assign to virtual slot 0
pciback 0000:00:1a.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:01:00.0: assign to virtual slot 1
pciback 0000:01:00.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:01:00.1: assign to virtual slot 1 func 1
pciback 0000:01:00.1: device has been assigned to another domain! Over-writting the ownership, but beware.
tap18.0: no IPv6 routers present
eth1: port 3(tap18.0) entering forwarding state
eth1: port 3(tap18.0) entering disabled state
eth1: port 3(tap18.0) entering disabled state
eth1: port 2(vif18.0) entering disabled state
eth1: port 2(vif18.0) entering disabled state
device vif19.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif19.0: link is not ready
device tap19.0 entered promiscuous mode
eth1: port 3(tap19.0) entering forwarding state
eth1: port 3(tap19.0) entering forwarding state
eth1: port 3(tap19.0) entering forwarding state
eth1: port 3(tap19.0) entering forwarding state
eth1: port 3(tap19.0) entering forwarding state
xen-pciback: vpci: 0000:00:1a.0: assign to virtual slot 0
pciback 0000:00:1a.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:01:00.0: assign to virtual slot 1
pciback 0000:01:00.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:01:00.1: assign to virtual slot 1 func 1
pciback 0000:01:00.1: device has been assigned to another domain! Over-writting the ownership, but beware.
tap19.0: no IPv6 routers present
e1000e: peth1 NIC Link is Down
eth1: port 1(peth1) entering forwarding state
e1000e: peth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0: peth1: 10/100 speed: disabling TSO
eth1: port 1(peth1) entering forwarding state
eth1: port 1(peth1) entering forwarding state
e1000e: peth1 NIC Link is Down
eth1: port 1(peth1) entering forwarding state
e1000e: peth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0: peth1: 10/100 speed: disabling TSO
eth1: port 1(peth1) entering forwarding state
eth1: port 1(peth1) entering forwarding state
usb 1-1.2: new high-speed USB device number 7 using ehci_hcd
usb 1-1.2: USB disconnect, device number 7
usb 1-1.6: new full-speed USB device number 8 using ehci_hcd
hub 1-1.6:1.0: USB hub found
hub 1-1.6:1.0: 4 ports detected
usb 1-1.6.1: new low-speed USB device number 9 using ehci_hcd
input: Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.0/input/input17
generic-usb 0003:046D:C221.0006: input,hidraw0: USB HID v1.10 Keyboard [Gaming Keyboard] on usb-0000:00:1d.0-1.6.1/input0
input: Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.1/input/input18
generic-usb 0003:046D:C221.0007: input,hiddev0,hidraw1: USB HID v1.10 Device [Gaming Keyboard] on usb-0000:00:1d.0-1.6.1/input1
usb 1-1.6.2: new full-speed USB device number 10 using ehci_hcd
input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.6/1-1.6.2/1-1.6.2:1.0/input/input19
generic-usb 0003:046D:C068.0008: input,hidraw2: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:1d.0-1.6.2/input0
input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.6/1-1.6.2/1-1.6.2:1.1/input/input20
generic-usb 0003:046D:C068.0009: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:1d.0-1.6.2/input1
usb 1-1.6.4: new full-speed USB device number 11 using ehci_hcd
input: G11 Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.6/1-1.6.4/1-1.6.4:1.0/input/input21
generic-usb 0003:046D:C225.000A: input,hiddev0,hidraw4: USB HID v1.11 Keypad [G11 Keyboard] on usb-0000:00:1d.0-1.6.4/input0
usb 1-1.6: USB disconnect, device number 8
usb 1-1.6.1: USB disconnect, device number 9
usb 1-1.6.2: USB disconnect, device number 10
usb 1-1.6.4: USB disconnect, device number 11
eth1: port 3(tap19.0) entering forwarding state
eth1: port 3(tap19.0) entering disabled state
eth1: port 3(tap19.0) entering disabled state
eth1: port 2(vif19.0) entering disabled state
eth1: port 2(vif19.0) entering disabled state
device vif20.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif20.0: link is not ready
device tap20.0 entered promiscuous mode
eth1: port 3(tap20.0) entering forwarding state
eth1: port 3(tap20.0) entering forwarding state
eth1: port 3(tap20.0) entering forwarding state
eth1: port 3(tap20.0) entering forwarding state
eth1: port 3(tap20.0) entering forwarding state
xen-pciback: vpci: 0000:00:1a.0: assign to virtual slot 0
pciback 0000:00:1a.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:01:00.0: assign to virtual slot 1
pciback 0000:01:00.0: device has been assigned to another domain! Over-writting the ownership, but beware.
xen-pciback: vpci: 0000:01:00.1: assign to virtual slot 1 func 1
pciback 0000:01:00.1: device has been assigned to another domain! Over-writting the ownership, but beware.
tap20.0: no IPv6 routers present
vboxdrv: Found 8 processor cores.
vboxdrv: fAsync=0 offMin=0x27c offMax=0x5b78
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
vboxpci: IOMMU not found (not registered)
warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3
Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
CIFS VFS: Send error in SessSetup = -13
CIFS VFS: cifs_mount failed w/return code = -13
general protection fault: 0000 [#1] SMP
CPU 3
Modules linked in: des_generic md4 nls_utf8 cifs pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) joydev usbhid hid xt_physdev ip6table_filter ip6_tables iptable_filter ip_tables ebtable_nat ebtables x_tables bridge stp xen_gntdev xen_netback xen_blkback xen_evtchn xenfs rfcomm bnep parport_pc bluetooth ppdev snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm mei(C) snd_seq_midi snd_rawmidi snd_seq_midi_event eeepc_wmi asus_wmi sparse_keymap psmouse serio_raw snd_seq sb_edac snd_timer snd_seq_device edac_core snd mac_hid soundcore snd_page_alloc lp parport mxm_wmi firewire_ohci firewire_core crc_itu_t e1000e radeon ttm drm_kms_helper drm wmi i2c_algo_bit
Pid: 19600, comm: VirtualBox Tainted: G C O 3.2.0-24-i7 #38 System manufacturer System Product Name/P9X79
RIP: e030:[] [] 0xffffffffa0461239
RSP: e02b:ffff880003677d78 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffc90013f36000 RCX: 0000000000000000
RDX: 0000000012ebc000 RSI: 0000000000000000 RDI: 0000000012ebc000
RBP: ffff880003677db8 R08: ffff88000ba197e0 R09: ffff880003677c64
R10: ffff8805c583d4f8 R11: ffffc90000000000 R12: 0000000000000202
R13: ffffffffa041f200 R14: ffffc90014b7f07c R15: 0000000000002678
FS: 00007fb04a23f700(0000) GS:ffff8805e2550000(0000) knlGS:0000000000000000
CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007fb03407e000 CR3: 0000000049893000 CR4: 0000000000002660
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process VirtualBox (pid: 19600, threadinfo ffff880003676000, task ffff8805b10bc4d0)
Stack:
0000000012ebc000 ffffffffa04605c2 ffff880003677db8 ffffffffa0458a6e
ffff88000ba19790 ffffffff00000000 0000000000000000 ffff88000ba19e90
ffff880003677dd8 ffffffffa046b8e4 ffffc90014b7f010 ffffc90014b7f010
Call Trace:
[] ? supdrvIOCtl+0x11b7/0x2760 [vboxdrv]
[] ? vmalloc+0x2c/0x30
[] ? VBoxDrvLinuxIOCtl_4_1_12+0x137/0x200 [vboxdrv]
[] ? do_vfs_ioctl+0x8a/0x340
[] ? vfs_read+0x10d/0x180
[] ? sys_ioctl+0x91/0xa0
[] ? system_call_fastpath+0x16/0x1b
Code: cc 81 e7 ff ff ff ff 81 e6 ff ff ff ff 48 31 c0 0f 79 fe 73 06 b8 5f f0 ff ff c3 75 05 b8 60 f0 ff ff c3 cc cc cc cc 48 31 c0 57 0f c7 34 24 73 07 b8 5e f0 ff ff eb 07 75 05 b8 5d f0 ff ff
RIP [] 0xffffffffa0461239
RSP
---[ end trace 7807506c3071eb66 ]---