dmesg - tester
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-27-generic (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #43-Ubuntu SMP Fri Jul 6 14:25:57 UTC 2012 (Ubuntu 3.2.0-27.43-generic 3.2.21)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bdaa1000 (usable)
BIOS-e820: 00000000bdaa1000 - 00000000bdaa7000 (reserved)
BIOS-e820: 00000000bdaa7000 - 00000000bdbba000 (usable)
BIOS-e820: 00000000bdbba000 - 00000000bdc0f000 (reserved)
BIOS-e820: 00000000bdc0f000 - 00000000bdd08000 (usable)
BIOS-e820: 00000000bdd08000 - 00000000bdf0f000 (reserved)
BIOS-e820: 00000000bdf0f000 - 00000000bdf18000 (usable)
BIOS-e820: 00000000bdf18000 - 00000000bdf1f000 (reserved)
BIOS-e820: 00000000bdf1f000 - 00000000bdf63000 (usable)
BIOS-e820: 00000000bdf63000 - 00000000bdf9f000 (ACPI NVS)
BIOS-e820: 00000000bdf9f000 - 00000000bdfe3000 (usable)
BIOS-e820: 00000000bdfe3000 - 00000000bdfff000 (ACPI data)
BIOS-e820: 00000000bdfff000 - 00000000be000000 (usable)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
NX (Execute Disable) protection: active
DMI present.
DMI: Dell Inc. Studio 1555/ , BIOS A08 11/07/2009
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 100000000 mask FC0000000 write-back
3 base 0FFE00000 mask FFFE00000 write-protect
4 disabled
5 disabled
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xbe000 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f7900] f7900
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000097000] 97000 size 20480
init_memory_mapping: 0000000000000000-00000000be000000
0000000000 - 00be000000 page 2M
kernel direct mapping tables up to be000000 @ 1fffc000-20000000
init_memory_mapping: 0000000100000000-0000000140000000
0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ bdfdd000-bdfe3000
RAMDISK: 35930000 - 36c90000
ACPI: RSDP 00000000000f7850 00024 (v02 PTLTD )
ACPI: XSDT 00000000bdff7886 00074 (v01 DELL QA09 06040000 LTP 00000000)
ACPI: FACP 00000000bdfe7000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
ACPI: DSDT 00000000bdfe8000 0728C (v02 Intel CANTIGA 06040000 INTL 20061109)
ACPI: FACS 00000000bdf9efc0 00040
ACPI: HPET 00000000bdffed16 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: MCFG 00000000bdffed4e 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: APIC 00000000bdffed8a 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 00000000bdffedf2 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SLIC 00000000bdffee1a 00176 (v01 DELL QA09 06040000 LTP 00000000)
ACPI: OSFR 00000000bdffef90 00070 (v01 DELL DELL 06040000 ASL 00000061)
ACPI: SSDT 00000000bdfe6000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: SSDT 00000000bdfe5000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 00000000bdfe4000 0020F (v01 PmRef ApTst 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000140000000
Initmem setup node 0 0000000000000000-0000000140000000
NODE_DATA [000000013fffb000 - 000000013fffffff]
[ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[9] active PFN ranges
0: 0x00000010 -> 0x0000009c
0: 0x00000100 -> 0x000bdaa1
0: 0x000bdaa7 -> 0x000bdbba
0: 0x000bdc0f -> 0x000bdd08
0: 0x000bdf0f -> 0x000bdf18
0: 0x000bdf1f -> 0x000bdf63
0: 0x000bdf9f -> 0x000bdfe3
0: 0x000bdfff -> 0x000be000
0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1039563
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3911 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 757119 pages, LIFO batch:31
Normal zone: 4096 pages used for memmap
Normal zone: 258048 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009c000 - 000000000009d000
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bdaa1000 - 00000000bdaa7000
PM: Registered nosave memory: 00000000bdbba000 - 00000000bdc0f000
PM: Registered nosave memory: 00000000bdd08000 - 00000000bdf0f000
PM: Registered nosave memory: 00000000bdf18000 - 00000000bdf1f000
PM: Registered nosave memory: 00000000bdf63000 - 00000000bdf9f000
PM: Registered nosave memory: 00000000bdfe3000 - 00000000bdfff000
PM: Registered nosave memory: 00000000be000000 - 0000000100000000
Allocating PCI resources starting at be000000 (gap: be000000:42000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s83072 r8192 d23424 u1048576
pcpu-alloc: s83072 r8192 d23424 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1019078
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3990768k/5242880k available (6556k kernel code, 1084628k absent, 167484k reserved, 6644k data, 920k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:512 16
Extended CMOS year: 2000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2394.354 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.70 BogoMIPS (lpj=9577416)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20110623
ftrace: allocating 26993 entries in 106 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 0a
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 Ok.
smpboot cpu 1: start_ip = 97000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (9577.18 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at bdf63000 (245760 bytes)
print_constraints: dummy:
RTC time: 0:33:23, date: 08/08/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
dmi type 0xB1 record - unknown flag
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bdf1ac20 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 00000000bdf18620 00575 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00575 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT 00000000bdf19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
ACPI: SSDT 00000000bdf19f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:01.0: [8086:2a41] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
pci 0000:00:1a.2: reg 20: [io 0x1840-0x185f]
pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
pci 0000:00:1a.7: reg 10: [mem 0xfc504800-0xfc504bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xfc500000-0xfc503fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0x1860-0x187f]
pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0x1880-0x189f]
pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0x18a0-0x18bf]
pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xfc504c00-0xfc504fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
pci 0000:00:1f.0: [8086:2919] type 0 class 0x000601
pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0x18f0-0x18f7]
pci 0000:00:1f.2: reg 14: [io 0x18e4-0x18e7]
pci 0000:00:1f.2: reg 18: [io 0x18e8-0x18ef]
pci 0000:00:1f.2: reg 1c: [io 0x18e0-0x18e3]
pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18df]
pci 0000:00:1f.2: reg 24: [mem 0xfc504000-0xfc5047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
pci 0000:01:00.0: [1002:9553] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
pci 0000:01:00.0: reg 14: [io 0x2000-0x20ff]
pci 0000:01:00.0: reg 18: [mem 0xfc000000-0xfc00ffff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa38] type 0 class 0x000403
pci 0000:01:00.1: reg 10: [mem 0xfc010000-0xfc013fff]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfc0fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:04:00.0: [8086:4232] type 0 class 0x000280
pci 0000:04:00.0: reg 10: [mem 0xf8000000-0xf8001fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 04-05]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 06-07]
pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
pci 0000:08:00.0: [14e4:1698] type 0 class 0x000200
pci 0000:08:00.0: reg 10: [mem 0xfc100000-0xfc10ffff 64bit]
pci 0000:08:00.0: PME# supported from D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 08-08]
pci 0000:00:1c.5: bridge window [mem 0xfc100000-0xfc1fffff]
pci 0000:09:01.0: [1180:0832] type 0 class 0x000c00
pci 0000:09:01.0: reg 10: [mem 0xfc200000-0xfc2007ff]
pci 0000:09:01.0: supports D1 D2
pci 0000:09:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:01.0: PME# disabled
pci 0000:09:01.1: [1180:0822] type 0 class 0x000805
pci 0000:09:01.1: reg 10: [mem 0xfc200800-0xfc2008ff]
pci 0000:09:01.1: supports D1 D2
pci 0000:09:01.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:01.1: PME# disabled
pci 0000:09:01.2: [1180:0592] type 0 class 0x000880
pci 0000:09:01.2: reg 10: [mem 0xfc200c00-0xfc200cff]
pci 0000:09:01.2: supports D1 D2
pci 0000:09:01.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:01.2: PME# disabled
pci 0000:09:01.3: [1180:0852] type 0 class 0x000880
pci 0000:09:01.3: reg 10: [mem 0xfc201000-0xfc2010ff]
pci 0000:09:01.3: supports D1 D2
pci 0000:09:01.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:01.3: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 09-09] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfc200000-0xfc2fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009c400 - 000000000009ffff
reserve RAM buffer: 00000000bdaa1000 - 00000000bfffffff
reserve RAM buffer: 00000000bdbba000 - 00000000bfffffff
reserve RAM buffer: 00000000bdd08000 - 00000000bfffffff
reserve RAM buffer: 00000000bdf18000 - 00000000bfffffff
reserve RAM buffer: 00000000bdf63000 - 00000000bfffffff
reserve RAM buffer: 00000000bdfe3000 - 00000000bfffffff
reserve RAM buffer: 00000000be000000 - 00000000bfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0xc0000000-0xfebfffff window]
pnp 00:00: [mem 0xfed40000-0xfed44fff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0000-0x001f]
pnp 00:01: [io 0x0081-0x0091]
pnp 00:01: [io 0x0093-0x009f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [mem 0xfed00000-0xfed003ff]
system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp 00:03: [io 0x00f0]
pnp 00:03: [irq 13]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [io 0x002e-0x002f]
pnp 00:04: [io 0x004e-0x004f]
pnp 00:04: [io 0x0061]
pnp 00:04: [io 0x0063]
pnp 00:04: [io 0x0065]
pnp 00:04: [io 0x0067]
pnp 00:04: [io 0x0068]
pnp 00:04: [io 0x006c]
pnp 00:04: [io 0x0070]
pnp 00:04: [io 0x0080]
pnp 00:04: [io 0x0092]
pnp 00:04: [io 0x00b2-0x00b3]
pnp 00:04: [io 0x0400-0x047f]
pnp 00:04: [io 0x0680-0x069f]
pnp 00:04: [io 0x0480-0x048f]
pnp 00:04: [io 0xffff]
pnp 00:04: [io 0xffff]
pnp 00:04: [io 0x1000-0x107f]
pnp 00:04: [io 0x1180-0x11ff]
pnp 00:04: [io 0x164e-0x164f]
pnp 00:04: [io 0xfe00]
pnp 00:04: [io 0x0900-0x097f]
system 00:04: [io 0x0400-0x047f] has been reserved
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x0480-0x048f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x1000-0x107f] has been reserved
system 00:04: [io 0x1180-0x11ff] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: [io 0xfe00] has been reserved
system 00:04: [io 0x0900-0x097f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [io 0x0070-0x0077]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0060]
pnp 00:06: [io 0x0064]
pnp 00:06: [irq 1]
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: [irq 12]
pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
pnp 00:08: [mem 0xfed10000-0xfed13fff]
pnp 00:08: [mem 0xfed18000-0xfed18fff]
pnp 00:08: [mem 0xfed19000-0xfed19fff]
pnp 00:08: [mem 0xe0000000-0xefffffff]
pnp 00:08: [mem 0xfeb00000-0xfeb03fff]
pnp 00:08: [mem 0xfed20000-0xfed3ffff]
pnp 00:08: [mem 0xfed40000-0xfed44fff]
pnp 00:08: [mem 0xfed45000-0xfed8ffff]
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: [mem 0xfeb00000-0xfeb03fff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0000000-0xc00000ff 64bit]
pci 0000:00:1f.3: BAR 0: set to [mem 0xc0000000-0xc00000ff 64bit] (PCI address [0xc0000000-0xc00000ff])
pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0100000-0xc02fffff 64bit pref]
pci 0000:00:1c.5: BAR 13: assigned [io 0x6000-0x6fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xfc020000-0xfc03ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfc0fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 04-05]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 06-07]
pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 08-08]
pci 0000:00:1c.5: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.5: bridge window [mem 0xfc100000-0xfc1fffff]
pci 0000:00:1c.5: bridge window [mem 0xc0100000-0xc02fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 09-09]
pci 0000:00:1e.0: bridge window [mem 0xfc200000-0xfc2fffff]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfbffffff]
pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:08: resource 1 [mem 0xfc100000-0xfc1fffff]
pci_bus 0000:08: resource 2 [mem 0xc0100000-0xc02fffff 64bit pref]
pci_bus 0000:09: resource 1 [mem 0xfc200000-0xfc2fffff]
pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:09: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:09: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:09: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:09: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:09: resource 10 [mem 0xc0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1a.1: PCI INT B disabled
pci 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1a.2: PCI INT C disabled
pci 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1a.7: PCI INT C disabled
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1d.1: PCI INT B disabled
pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.7: PCI INT A disabled
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800b9aa1000 - ffff8800bdaa1000
software IO TLB at phys 0xb9aa1000 - 0xbdaa1000
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1344386002.428:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 7794
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x3122220
intel_idle: does not run on family 6 model 23
Freeing initrd memory: 19840k freed
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ADP1] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (58 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (52 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [TZ02] (72 C)
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
ERST: Table is not found!
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT0] (battery present)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part ccc sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504100 irq 45
ata2: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504180 irq 45
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504380 irq 45
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfc504800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Magic number: 8:637:556
pci_link PNP0C0F:07: hash matches
rtc_cmos 00:05: setting system clock to 2012-08-08 00:33:24 UTC (1344386004)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata6: SATA link down (SStatus 0 SControl 300)
usb 1-6: new high-speed USB device number 2 using ehci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD3200BEVT-75A23T0, 01.01A01, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-7 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: HL-DT-ST DVD+/-RW GA10N, A203, max UDMA/133
ata2.00: configured for UDMA/133
scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GA10N A203 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 < sda5 > sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 920k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1616k freed
Freeing unused kernel memory: 1200k freed
udevd[117]: starting version 175
tg3.c:v3.121 (November 2, 2011)
tg3 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:08:00.0: setting latency timer to 64
ACPI Warning: _BQC returned an invalid level (20110623/video-480)
wmi: Mapper loaded
acpi device:03: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5
ACPI: Video Device [M86] (multi-head: yes rom: no post: no)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:09:01.1: SDHCI controller found [1180:0822] (rev 22)
sdhci-pci 0000:09:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
tg3 0000:08:00.0: eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address 00:22:19:fe:16:2a
tg3 0000:08:00.0: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:08:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:08:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
mmc0: no vmmc regulator found
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:09:01.1] using DMA
firewire_ohci 0000:09:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
firewire_ohci: Added fw-ohci device 0000:09:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11
usb 7-1: new full-speed USB device number 2 using uhci_hcd
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input6
generic-usb 0003:046D:C526.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input7
generic-usb 0003:046D:C526.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
firewire_core: created device fw0: GUID 354fc0003d425e01, S400
vesafb: mode is 1152x864x32, linelength=4608, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011800000, using 3904k, total 3904k
Console: switching to colour frame buffer device 144x54
fb0: VESA VGA frame buffer device
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[431]: starting version 175
lp: driver loaded but no devices found
r592 0000:09:01.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
r592: driver successfully loaded
cfg80211: Calling CRDA to update world regulatory domain
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
input: Dell WMI hotkeys as /devices/virtual/input/input8
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
r852 0000:09:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
r852: driver loaded successfully
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:6417)
input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
Copyright(c) 2003-2011 Intel Corporation
iwlwifi 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlwifi 0000:04:00.0: setting latency timer to 64
iwlwifi 0000:04:00.0: pci_resource_len = 0x00002000
iwlwifi 0000:04:00.0: pci_resource_base = ffffc90000674000
iwlwifi 0000:04:00.0: HW Revision ID = 0x0
iwlwifi 0000:04:00.0: irq 46 for MSI/MSI-X
iwlwifi 0000:04:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:04:00.0: device EEPROM VER=0x11f, CALIB=0x4
iwlwifi 0000:04:00.0: Device SKU: 0Xf0
iwlwifi 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 3759 MBytes.
[fglrx] vendor: 1002 device: 9553 count: 1
[fglrx] ioport: bar 1, base 0x2000, size: 0x100
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.0: setting latency timer to 64
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors
iwlwifi 0000:04:00.0: loaded firmware version 8.83.5.1 build 33692
Registered led device: phy0-led
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
type=1400 audit(1344386019.725:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=808 comm="apparmor_parser"
type=1400 audit(1344386019.725:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=860 comm="apparmor_parser"
type=1400 audit(1344386019.725:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=808 comm="apparmor_parser"
type=1400 audit(1344386019.725:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=860 comm="apparmor_parser"
type=1400 audit(1344386019.725:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=808 comm="apparmor_parser"
type=1400 audit(1344386019.725:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=860 comm="apparmor_parser"
type=1400 audit(1344386019.725:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=793 comm="apparmor_parser"
type=1400 audit(1344386019.725:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=793 comm="apparmor_parser"
type=1400 audit(1344386019.725:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=793 comm="apparmor_parser"
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
snd_hda_intel 0000:01:00.1: setting latency timer to 64
HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Adding 3977212k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:3977212k
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (1082) killed by TERM signal
type=1400 audit(1344386025.293:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1143 comm="apparmor_parser"
type=1400 audit(1344386025.293:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1143 comm="apparmor_parser"
type=1400 audit(1344386025.293:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1143 comm="apparmor_parser"
type=1400 audit(1344386025.345:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1142 comm="apparmor_parser"
type=1400 audit(1344386025.385:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1146 comm="apparmor_parser"
type=1400 audit(1344386025.385:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1146 comm="apparmor_parser"
type=1400 audit(1344386025.533:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1147 comm="apparmor_parser"
type=1400 audit(1344386025.533:18): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1147 comm="apparmor_parser"
type=1400 audit(1344386025.641:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1144 comm="apparmor_parser"
type=1400 audit(1344386025.645:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=1144 comm="apparmor_parser"
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:04:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:04:00.0: Radio type=0x1-0x2-0x0
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
tg3 0000:08:00.0: irq 49 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
fglrx_pci 0000:01:00.0: irq 50 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1542
[fglrx] Firegl kernel thread PID: 1543
[fglrx] Firegl kernel thread PID: 1544
[fglrx] IRQ 50 Enabled
[fglrx] Gart USWC size:1224 M.
[fglrx] Gart cacheable size:486 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fc2b000, size:3d5000
[fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
wlan0: authenticate with 00:1c:10:93:a9:d7 (try 1)
wlan0: authenticated
wlan0: associate with 00:1c:10:93:a9:d7 (try 1)
wlan0: RX AssocResp from 00:1c:10:93:a9:d7 (capab=0x401 status=0 aid=3)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present