dmesg - hp
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-23-generic (buildd@crested) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 (Ubuntu 3.2.0-23.36-generic 3.2.14)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dffa0000 (usable)
BIOS-e820: 00000000dffa0000 - 00000000dffae000 (ACPI data)
BIOS-e820: 00000000dffae000 - 00000000dfff0000 (ACPI NVS)
BIOS-e820: 00000000dfff0000 - 00000000e0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
NX (Execute Disable) protection: active
DMI present.
DMI: HP-Pavilion VG069AA-UUW m9751sc/VIOLET3, BIOS 5.05 06/12/2009
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x220000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000220000000 aka 8704M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xdffa0 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000ff780] ff780
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000098000] 98000 size 20480
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000dffa0000
0000000000 - 00c0000000 page 1G
00c0000000 - 00dfe00000 page 2M
00dfe00000 - 00dffa0000 page 4k
kernel direct mapping tables up to dffa0000 @ 1fffd000-20000000
init_memory_mapping: 0000000100000000-0000000220000000
0100000000 - 0200000000 page 1G
0200000000 - 0220000000 page 2M
kernel direct mapping tables up to 220000000 @ dff9e000-dffa0000
RAMDISK: 7ebbb000 - 7ffff000
ACPI: RSDP 00000000000fc6a0 00014 (v00 HPQOEM)
ACPI: RSDT 00000000dffa0000 00048 (v01 HPQOEM SLIC-CPC 20090612 MSFT 00000097)
ACPI: FACP 00000000dffa0200 00084 (v01 HPQOEM SLIC-CPC 20090612 MSFT 00000097)
ACPI: DSDT 00000000dffa0450 0909D (v01 HPQOEM SLIC-CPC 00000001 INTL 20051117)
ACPI: FACS 00000000dffae000 00040
ACPI: APIC 00000000dffa0390 00080 (v01 HPQOEM SLIC-CPC 20090612 MSFT 00000097)
ACPI: MCFG 00000000dffa0410 0003C (v01 HPQOEM SLIC-CPC 20090612 MSFT 00000097)
ACPI: OEMB 00000000dffae040 00073 (v01 HPQOEM SLIC-CPC 20090612 MSFT 00000097)
ACPI: HPET 00000000dffa94f0 00038 (v01 HPQOEM SLIC-CPC 20090612 MSFT 00000097)
ACPI: INFO 00000000dffae0c0 00124 (v01 HPQOEM SLIC-CPC 20090612 MSFT 00000097)
ACPI: NVHD 00000000dffae1f0 00554 (v01 HPQOEM SLIC-CPC 20090612 MSFT 00000097)
ACPI: SLIC 00000000dffae750 00176 (v01 HPQOEM SLIC-CPC 00000001 MSFT 00000001)
ACPI: SSDT 00000000dffa9530 00672 (v01 HPQOEM SLIC-CPC 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-0000000220000000
Initmem setup node 0 0000000000000000-0000000220000000
NODE_DATA [000000021fffb000 - 000000021fffffff]
[ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217600000-ffff88021f5fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00220000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x000dffa0
0: 0x00100000 -> 0x00220000
On node 0 totalpages: 2096941
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3912 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 896992 pages, LIFO batch:31
Normal zone: 18432 pages used for memmap
Normal zone: 1161216 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x2008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 3, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
SMP: Allowing 4 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
PM: Registered nosave memory: 00000000dffa0000 - 00000000dffae000
PM: Registered nosave memory: 00000000dffae000 - 00000000dfff0000
PM: Registered nosave memory: 00000000dfff0000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
PM: Registered nosave memory: 00000000fef00000 - 00000000ff700000
PM: Registered nosave memory: 00000000ff700000 - 0000000100000000
Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88021fc00000 s83072 r8192 d23424 u524288
pcpu-alloc: s83072 r8192 d23424 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062120
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ d4000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ d4000000
PM: Registered nosave memory: 00000000d4000000 - 00000000d8000000
Memory: 8088076k/8912896k available (6566k kernel code, 525132k absent, 299688k reserved, 6637k data, 920k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:712 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2799.846 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.69 BogoMIPS (lpj=11199384)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
using AMD E400 aware idle routine
ACPI: Core revision 20110623
ftrace: allocating 27049 entries in 107 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X3 720 Processor stepping 02
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 98000
NMI watchdog enabled, takes one hw-pmu counter.
#2
smpboot cpu 2: start_ip = 98000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 3 CPUs
Total of 3 processors activated (16799.76 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at dffae000 (270336 bytes)
print_constraints: dummy:
RTC time: 19:47:21, date: 07/29/12
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000e0000000 aka 3584M
Fam 10h mmconf [mem 0xf0000000-0xf3ffffff]
node 0 link 0: mmio [f0000000, f3ffffff] ==> none
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [e0000000, efffffff]
TOM2: 0000000220000000 aka 8704M
bus: [00, 07] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0xe0000000-0xefffffff]
bus: 00 index 3 [mem 0x220000000-0xfcffffffff]
bus: 00 index 4 [mem 0xf4000000-0xffffffff]
Extended Config Space enabled on 1 nodes
ACPI: bus type pci registered
Trying to unpack rootfs image as initramfs...
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xefffffff]
pci_root PNP0A03:00: host bridge window [mem 0xf4000000-0xfebfffff]
pci 0000:00:00.0: [10de:0754] type 0 class 0x000500
pci 0000:00:01.0: [10de:075c] type 0 class 0x000601
pci 0000:00:01.0: reg 10: [io 0x2f00-0x2fff]
pci 0000:00:01.1: [10de:0752] type 0 class 0x000c05
pci 0000:00:01.1: reg 10: [io 0x2900-0x293f]
pci 0000:00:01.1: reg 20: [io 0x2d00-0x2d3f]
pci 0000:00:01.1: reg 24: [io 0x2e00-0x2e3f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:01.2: [10de:0751] type 0 class 0x000500
pci 0000:00:01.3: [10de:0753] type 0 class 0x000b40
pci 0000:00:01.3: reg 10: [mem 0xfde80000-0xfdefffff]
pci 0000:00:01.4: [10de:0568] type 0 class 0x000500
pci 0000:00:02.0: [10de:077b] type 0 class 0x000c03
pci 0000:00:02.0: reg 10: [mem 0xfde7f000-0xfde7ffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: [10de:077c] type 0 class 0x000c03
pci 0000:00:02.1: reg 10: [mem 0xfde7ec00-0xfde7ecff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:04.0: [10de:077d] type 0 class 0x000c03
pci 0000:00:04.0: reg 10: [mem 0xfde7d000-0xfde7dfff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:04.1: [10de:077e] type 0 class 0x000c03
pci 0000:00:04.1: reg 10: [mem 0xfde7e800-0xfde7e8ff]
pci 0000:00:04.1: supports D1 D2
pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.1: PME# disabled
pci 0000:00:07.0: [10de:0774] type 0 class 0x000403
pci 0000:00:07.0: reg 10: [mem 0xfde78000-0xfde7bfff]
pci 0000:00:07.0: PME# supported from D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: [10de:075a] type 1 class 0x000604
pci 0000:00:09.0: [10de:0ad4] type 0 class 0x000106
pci 0000:00:09.0: reg 10: [io 0xd480-0xd487]
pci 0000:00:09.0: reg 14: [io 0xd400-0xd403]
pci 0000:00:09.0: reg 18: [io 0xd080-0xd087]
pci 0000:00:09.0: reg 1c: [io 0xd000-0xd003]
pci 0000:00:09.0: reg 20: [io 0xcc00-0xcc0f]
pci 0000:00:09.0: reg 24: [mem 0xfde76000-0xfde77fff]
pci 0000:00:0a.0: [10de:0760] type 0 class 0x000200
pci 0000:00:0a.0: reg 10: [mem 0xfde7c000-0xfde7cfff]
pci 0000:00:0a.0: reg 14: [io 0xc880-0xc887]
pci 0000:00:0a.0: reg 18: [mem 0xfde7e400-0xfde7e4ff]
pci 0000:00:0a.0: reg 1c: [mem 0xfde7e000-0xfde7e00f]
pci 0000:00:0a.0: supports D1 D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:10.0: [10de:0778] type 1 class 0x000604
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:12.0: [10de:075b] type 1 class 0x000604
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
pci 0000:00:13.0: [10de:077a] type 1 class 0x000604
pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: PME# disabled
pci 0000:00:14.0: [10de:077a] type 1 class 0x000604
pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: PME# disabled
pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
pci 0000:01:05.0: [11c1:5811] type 0 class 0x000c00
pci 0000:01:05.0: reg 10: [mem 0xfdfff000-0xfdffffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
pci 0000:01:05.0: PME# disabled
pci 0000:00:08.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:08.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:08.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:08.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:08.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:08.0: bridge window [mem 0xe0000000-0xefffffff] (subtractive decode)
pci 0000:00:08.0: bridge window [mem 0xf4000000-0xfebfffff] (subtractive decode)
pci 0000:02:00.0: [1002:9498] type 0 class 0x000300
pci 0000:02:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: reg 18: [mem 0xfe8f0000-0xfe8fffff 64bit]
pci 0000:02:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 30: [mem 0xfe8c0000-0xfe8dffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.1: [1002:aa38] type 0 class 0x000403
pci 0000:02:00.1: reg 10: [mem 0xfe8ec000-0xfe8effff 64bit]
pci 0000:02:00.1: supports D1 D2
pci 0000:00:10.0: PCI bridge to [bus 02-02]
pci 0000:00:10.0: bridge window [io 0xe000-0xefff]
pci 0000:00:10.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:10.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:03:00.0: [1814:0781] type 0 class 0x000280
pci 0000:03:00.0: reg 10: [mem 0xfe9f0000-0xfe9fffff]
pci 0000:03:00.0: PME# supported from D0 D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:00:12.0: PCI bridge to [bus 03-03]
pci 0000:00:12.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:04:00.0: [14f1:8880] type 0 class 0x000400
pci 0000:04:00.0: reg 10: [mem 0xfea00000-0xfebfffff 64bit]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:13.0: PCI bridge to [bus 04-04]
pci 0000:00:13.0: bridge window [mem 0xfea00000-0xfebfffff]
pci 0000:00:14.0: PCI bridge to [bus 05-05]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *14
ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *15
ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *14
ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *7
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *14
ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d400 - 000000000009ffff
reserve RAM buffer: 00000000dffa0000 - 00000000dfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0xe0000000-0xefffffff window]
pnp 00:00: [mem 0xf4000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [dma 4]
pnp 00:01: [io 0x0000-0x000f]
pnp 00:01: [io 0x0081-0x0083]
pnp 00:01: [io 0x0087]
pnp 00:01: [io 0x0089-0x008b]
pnp 00:01: [io 0x008f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io 0x0061]
pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:03: [io 0x00f0-0x00ff]
pnp 00:03: [irq 13]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [mem 0x000d0000-0x000d3fff window]
pnp 00:04: [mem 0x000d4000-0x000d7fff window]
pnp 00:04: [mem 0x000de000-0x000dffff window]
pnp 00:04: [io 0x0010-0x001f]
pnp 00:04: [io 0x0022-0x003f]
pnp 00:04: [io 0x0044-0x004d]
pnp 00:04: [io 0x0050-0x005f]
pnp 00:04: [io 0x0062-0x0063]
pnp 00:04: [io 0x0065-0x006f]
pnp 00:04: [io 0x0072-0x007f]
pnp 00:04: [io 0x0080]
pnp 00:04: [io 0x0084-0x0086]
pnp 00:04: [io 0x0088]
pnp 00:04: [io 0x008c-0x008e]
pnp 00:04: [io 0x0090-0x009f]
pnp 00:04: [io 0x00a2-0x00bf]
pnp 00:04: [io 0x00e0-0x00ef]
pnp 00:04: [io 0x04d0-0x04d1]
pnp 00:04: [io 0x0800-0x080f]
pnp 00:04: [io 0x2000-0x207f]
pnp 00:04: [io 0x2080-0x20ff]
pnp 00:04: [io 0x2400-0x247f]
pnp 00:04: [io 0x2480-0x24ff]
pnp 00:04: [io 0x2800-0x287f]
pnp 00:04: [io 0x2880-0x28ff]
pnp 00:04: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:04: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:04: [mem 0xfed04000-0xfed04fff]
pnp 00:04: [mem 0xfee01000-0xfeefffff]
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x0800-0x080f] has been reserved
system 00:04: [io 0x2000-0x207f] has been reserved
system 00:04: [io 0x2080-0x20ff] has been reserved
system 00:04: [io 0x2400-0x247f] has been reserved
system 00:04: [io 0x2480-0x24ff] has been reserved
system 00:04: [io 0x2800-0x287f] has been reserved
system 00:04: [io 0x2880-0x28ff] has been reserved
system 00:04: [mem 0x000d0000-0x000d3fff window] has been reserved
system 00:04: [mem 0x000d4000-0x000d7fff window] has been reserved
system 00:04: [mem 0x000de000-0x000dffff window] has been reserved
system 00:04: [mem 0xfed04000-0xfed04fff] has been reserved
system 00:04: [mem 0xfee01000-0xfeefffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [mem 0xfed00000-0xfed00fff]
pnp 00:05: [irq 2 disabled]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:06: [io 0x0070-0x0071]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io 0x0060]
pnp 00:07: [io 0x0064]
pnp 00:07: [mem 0xfec00000-0xfec00fff]
pnp 00:07: [mem 0xfee00000-0xfee00fff]
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io 0x0a00-0x0adf]
system 00:08: [io 0x0a00-0x0adf] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0xf0000000-0xf3ffffff]
system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [mem 0x00000000-0x0009ffff]
pnp 00:0a: [mem 0x000c0000-0x000cffff]
pnp 00:0a: [mem 0x000e0000-0x000fffff]
pnp 00:0a: [mem 0x00100000-0xdfffffff]
pnp 00:0a: [mem 0xfec00000-0xffffffff]
system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0a: [mem 0x00100000-0xdfffffff] could not be reserved
system 00:0a: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:08.0: PCI bridge to [bus 01-01]
pci 0000:00:08.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:10.0: PCI bridge to [bus 02-02]
pci 0000:00:10.0: bridge window [io 0xe000-0xefff]
pci 0000:00:10.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:10.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:12.0: PCI bridge to [bus 03-03]
pci 0000:00:12.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:13.0: PCI bridge to [bus 04-04]
pci 0000:00:13.0: bridge window [mem 0xfea00000-0xfebfffff]
pci 0000:00:14.0: PCI bridge to [bus 05-05]
pci 0000:00:08.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:10.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18
pci 0000:00:12.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:12.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 17
pci 0000:00:13.0: PCI INT A -> Link[LN3A] -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:13.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 16
pci 0000:00:14.0: PCI INT A -> Link[LN4A] -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:14.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xe0000000-0xefffffff]
pci_bus 0000:00: resource 9 [mem 0xf4000000-0xfebfffff]
pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0xe0000000-0xefffffff]
pci_bus 0000:01: resource 9 [mem 0xf4000000-0xfebfffff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
pci 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:02.0: PCI INT A disabled
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
pci 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:02.1: PCI INT B disabled
ACPI: PCI Interrupt Link [UB11] enabled at IRQ 21
pci 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:04.0: PCI INT A disabled
ACPI: PCI Interrupt Link [UB12] enabled at IRQ 20
pci 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:04.1: PCI INT B disabled
pci 0000:00:07.0: Enabling HT MSI Mapping
pci 0000:00:08.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Enabling HT MSI Mapping
pci 0000:00:0a.0: Enabling HT MSI Mapping
pci 0000:02:00.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ d4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
audit: initializing netlink socket (disabled)
type=2000 audit(1343591241.512:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 15925
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Table is not found!
GHES: HEST is not enabled!
Freeing initrd memory: 20752k freed
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:09.0: version 3.0
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
ahci 0000:00:09.0: irq 40 for MSI/MSI-X
ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
ahci 0000:00:09.0: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio boh
ahci 0000:00:09.0: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m8192@0xfde76000 port 0xfde76100 irq 40
ata2: SATA max UDMA/133 abar m8192@0xfde76000 port 0xfde76180 irq 40
ata3: SATA max UDMA/133 abar m8192@0xfde76000 port 0xfde76200 irq 40
ata4: SATA max UDMA/133 abar m8192@0xfde76000 port 0xfde76280 irq 40
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 22, io mem 0xfde7ec00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:04.1: setting latency timer to 64
ehci_hcd 0000:00:04.1: EHCI Host Controller
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:04.1: debug port 1
ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
ehci_hcd 0000:00:04.1: irq 20, io mem 0xfde7e800
ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.0: irq 23, io mem 0xfde7f000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:04.0: setting latency timer to 64
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:04.0: irq 21, io mem 0xfde7d000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 4:438:800
rtc_cmos 00:06: setting system clock to 2012-07-29 19:47:22 UTC (1343591242)
powernow-k8: Found 1 AMD Phenom(tm) II X3 720 Processor (3 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (2800 MHz)
powernow-k8: 1 : pstate 1 (2100 MHz)
powernow-k8: 2 : pstate 2 (1600 MHz)
powernow-k8: 3 : pstate 3 (800 MHz)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata4.00: ATAPI: hp BD-RE BH20L, B574, max UDMA/100
ata2.00: ATA-8: WDC WD1500HLFS-01G6U4, 04.04V06, max UDMA/133
ata2.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
ata2.00: configured for UDMA/133
ata1.00: ATA-8: OCZ-VERTEX2 3.5, 1.37, max UDMA/133
ata1.00: 224674128 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/100
usb 1-1: new high-speed USB device number 2 using ehci_hcd
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 3.5 1.37 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 224674128 512-byte logical blocks: (115 GB/107 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
scsi 1:0:0:0: Direct-Access ATA WDC WD1500HLFS-0 04.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 293046768 512-byte logical blocks: (150 GB/139 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 3:0:0:0: CD-ROM hp BD-RE BH20L B574 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 37x/37x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg3 type 5
sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: [sdb] Attached SCSI disk
sdc: sdc1 sdc2 sdc3
sd 2:0:0:0: [sdc] Attached SCSI disk
Freeing unused kernel memory: 920k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1608k freed
Freeing unused kernel memory: 1196k freed
udevd[141]: starting version 175
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
forcedeth 0000:00:0a.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19
firewire_ohci 0000:01:05.0: PCI INT A -> Link[LNKD] -> GSI 19 (level, low) -> IRQ 19
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
radeon 0000:02:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (RV730 0x1002:0x9498 0x1462:0x1603).
[drm] register mmio base: 0xFE8F0000
[drm] register mmio size: 65536
ATOM BIOS: 113
radeon 0000:02:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:02:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 4089252 kiB.
[TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:02:00.0: irq 41 for MSI/MSI-X
radeon 0000:02:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RV730 Microcode
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:02:00.0: WB enabled
firewire_ohci: Added fw-ohci device 0000:01:05.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A
[drm] HPD2
[drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] VGA
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm] DVI-I
[drm] HPD1
[drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] DFP1: INTERNAL_UNIPHY
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xE0142000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Refined TSC clocksource calibration: 2800.000 MHz.
Switching to clocksource tsc
usb 2-5: new high-speed USB device number 3 using ehci_hcd
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:26:18:0d:2e:8e
forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt lnktim msi desc-v3
usbcore: registered new interface driver uas
Initializing USB Mass Storage driver...
scsi4 : usb-storage 2-5:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
firewire_core: created device fw0: GUID 001e8c0001e7daf2, S400
Console: switching to colour frame buffer device 240x67
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.12.0 20080528 for 0000:02:00.0 on minor 0
usb 4-2: new full-speed USB device number 2 using ohci_hcd
usb 3-2: new full-speed USB device number 2 using ohci_hcd
usb 1-1.1: new high-speed USB device number 4 using ehci_hcd
hub 1-1.1:1.0: USB hub found
hub 1-1.1:1.0: 4 ports detected
generic-usb 0003:0BDA:0152.0001: timeout initializing reports
generic-usb 0003:0BDA:0152.0001: hiddev0,hidraw0: USB HID v1.11 Device [Generic USB2.0-CRW] on usb-0000:00:04.1-5/input1
scsi 4:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
scsi 4:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
scsi 4:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
input: NuForce NuForce \xffffffc2\xffffffb5\xffffffb5DAC 2 as /devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.0/input/input2
generic-usb 0003:1852:DB96.0002: input,hidraw1: USB HID v1.00 Device [NuForce NuForce \xffffffc2\xffffffb5\xffffffb5DAC 2] on usb-0000:00:04.0-2/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:1: Attached scsi generic sg5 type 0
sd 4:0:0:2: Attached scsi generic sg6 type 0
sd 4:0:0:3: Attached scsi generic sg7 type 0
sd 4:0:0:1: [sde] Attached SCSI removable disk
sd 4:0:0:3: [sdg] Attached SCSI removable disk
sd 4:0:0:0: [sdd] Attached SCSI removable disk
sd 4:0:0:2: [sdf] Attached SCSI removable disk
Btrfs loaded
xor: automatically using best checksumming function: generic_sse
generic_sse: 11456.000 MB/sec
xor: using function: generic_sse (11456.000 MB/sec)
device-mapper: dm-raid45: initialized v0.2594b
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
squashfs: version 4.0 (2009/01/31) Phillip Lougher
ADDRCONF(NETDEV_UP): eth0: link is not ready
Adding 8570672k swap on /dev/sdb3. Priority:-1 extents:1 across:8570672k
udevd[1354]: starting version 175
lp: driver loaded but no devices found
i2c i2c-7: nForce2 SMBus adapter at 0x2d00
ACPI: resource nForce2_smbus [io 0x2e00-0x2e3f] conflicts with ACPI region SM00 [io 0x2e00-0x2e3f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
MCE: In-kernel MCE decoding enabled.
ppdev: user-space parallel port driver
EDAC MC: Ver: 2.1.0
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
cfg80211: Calling CRDA to update world regulatory domain
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
device-mapper: multipath: version 1.3.0 loaded
logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-2/input2
input: Logitech Unifying Device. Wireless PID:1028 as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0005/input/input3
logitech-djdevice 0003:046D:C52B.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:02.0-2:2
input: Logitech Unifying Device. Wireless PID:2010 as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0005/input/input4
logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2010] on usb-0000:00:02.0-2:3
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Linux video capture interface: v2.00
init: failsafe main process (1667) killed by TERM signal
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
rt2800pci 0000:03:00.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18
rt2800pci 0000:03:00.0: setting latency timer to 64
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: rt2800pci-phy0::radio
Registered led device: rt2800pci-phy0::assoc
Registered led device: rt2800pci-phy0::quality
usbcore: registered new interface driver snd-usb-audio
snd_hda_intel 0000:00:07.0: power state changed by ACPI to D0
snd_hda_intel 0000:00:07.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
snd_hda_intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
hda_intel: Disabling MSI
snd_hda_intel 0000:00:07.0: setting latency timer to 64
cx23885 driver version 0.0.3 loaded
cx23885 0000:04:00.0: PCI INT A -> Link[LN3A] -> GSI 17 (level, low) -> IRQ 17
cx23885[0]: Your board isn't known (yet) to the driver.
cx23885[0]: Try to pick one of the existing card configs via
cx23885[0]: card= insmod option. Updating to the latest
cx23885[0]: version might help as well.
cx23885[0]: Here is a list of valid choices for the card= insmod option:
cx23885[0]: card=0 -> UNKNOWN/GENERIC
cx23885[0]: card=1 -> Hauppauge WinTV-HVR1800lp
cx23885[0]: card=2 -> Hauppauge WinTV-HVR1800
cx23885[0]: card=3 -> Hauppauge WinTV-HVR1250
cx23885[0]: card=4 -> DViCO FusionHDTV5 Express
cx23885[0]: card=5 -> Hauppauge WinTV-HVR1500Q
cx23885[0]: card=6 -> Hauppauge WinTV-HVR1500
cx23885[0]: card=7 -> Hauppauge WinTV-HVR1200
cx23885[0]: card=8 -> Hauppauge WinTV-HVR1700
cx23885[0]: card=9 -> Hauppauge WinTV-HVR1400
cx23885[0]: card=10 -> DViCO FusionHDTV7 Dual Express
cx23885[0]: card=11 -> DViCO FusionHDTV DVB-T Dual Express
cx23885[0]: card=12 -> Leadtek Winfast PxDVR3200 H
cx23885[0]: card=13 -> Compro VideoMate E650F
cx23885[0]: card=14 -> TurboSight TBS 6920
cx23885[0]: card=15 -> TeVii S470
cx23885[0]: card=16 -> DVBWorld DVB-S2 2005
cx23885[0]: card=17 -> NetUP Dual DVB-S2 CI
cx23885[0]: card=18 -> Hauppauge WinTV-HVR1270
cx23885[0]: card=19 -> Hauppauge WinTV-HVR1275
cx23885[0]: card=20 -> Hauppauge WinTV-HVR1255
cx23885[0]: card=21 -> Hauppauge WinTV-HVR1210
cx23885[0]: card=22 -> Mygica X8506 DMB-TH
cx23885[0]: card=23 -> Magic-Pro ProHDTV Extreme 2
cx23885[0]: card=24 -> Hauppauge WinTV-HVR1850
cx23885[0]: card=25 -> Compro VideoMate E800
cx23885[0]: card=26 -> Hauppauge WinTV-HVR1290
cx23885[0]: card=27 -> Mygica X8558 PRO DMB-TH
cx23885[0]: card=28 -> LEADTEK WinFast PxTV1200
cx23885[0]: card=29 -> GoTView X5 3D Hybrid
cx23885[0]: card=30 -> NetUP Dual DVB-T/C-CI RF
cx23885[0]: card=31 -> Leadtek Winfast PxDVR3200 H XC4000
cx23885[0]: card=32 -> MPX-885
CORE cx23885[0]: subsystem: 1461:e139, board: UNKNOWN/GENERIC [card=0,autodetected]
IR NEC protocol handler initialized
cx23885_dev_checkrevision() Hardware revision = 0xd0
cx23885[0]/0: found at 0000:04:00.0, rev: 4, irq: 17, latency: 0, mmio: 0xfea00000
cx23885 0000:04:00.0: setting latency timer to 64
IR RC5(x) protocol handler initialized
hda_codec: ALC888: BIOS auto-probing.
hda_codec: ALC888: SKU not ready 0x411111f0
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
input: HDA NVidia Line as /devices/pci0000:00/0000:00:07.0/sound/card0/input5
input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input6
input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input7
input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input8
input: HDA NVidia Line-Out Side as /devices/pci0000:00/0000:00:07.0/sound/card0/input9
input: HDA NVidia Line-Out CLFE as /devices/pci0000:00/0000:00:07.0/sound/card0/input10
input: HDA NVidia Line-Out Surround as /devices/pci0000:00/0000:00:07.0/sound/card0/input11
input: HDA NVidia Line-Out Front as /devices/pci0000:00/0000:00:07.0/sound/card0/input12
ACPI: PCI Interrupt Link [LN0B] enabled at IRQ 18
snd_hda_intel 0000:02:00.1: PCI INT B -> Link[LN0B] -> GSI 18 (level, low) -> IRQ 18
snd_hda_intel 0000:02:00.1: irq 42 for MSI/MSI-X
snd_hda_intel 0000:02:00.1: setting latency timer to 64
IR MCE Keyboard/mouse protocol handler initialized
HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:10.0/0000:02:00.1/sound/card2/input13
lirc_dev: IR Remote Control driver registered, major 249
IR LIRC bridge handler initialized
forcedeth 0000:00:0a.0: irq 43 for MSI/MSI-X
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
init: alsa-restore main process (2128) terminated with status 99
eth0: no IPv6 routers present
retire_capture_urb: 2493 callbacks suppressed