dmesg - b200m2-lin-phoronix-kernel-1.3.0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32.59-0.3-default (geeko@buildhost) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1 SMP 2012-04-27 11:14:44 +0200
Command line: root=/dev/system/root resume=/dev/system/swap splash=silent showopts
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000008c146000 (usable)
BIOS-e820: 000000008c146000 - 000000008d546000 (ACPI NVS)
BIOS-e820: 000000008d546000 - 000000008f602000 (ACPI data)
BIOS-e820: 000000008f602000 - 000000008f64f000 (reserved)
BIOS-e820: 000000008f64f000 - 000000008f6e2000 (ACPI data)
BIOS-e820: 000000008f6e2000 - 000000008f6eb000 (ACPI NVS)
BIOS-e820: 000000008f6eb000 - 000000008f6f0000 (ACPI data)
BIOS-e820: 000000008f6f0000 - 000000008f7cf000 (ACPI NVS)
BIOS-e820: 000000008f7cf000 - 000000008f800000 (ACPI data)
BIOS-e820: 000000008f800000 - 0000000090000000 (reserved)
BIOS-e820: 00000000a0000000 - 00000000b0000000 (reserved)
BIOS-e820: 00000000fc000000 - 00000000fd000000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000870000000 (usable)
DMI 2.5 present.
last_pfn = 0x870000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFF0000000 write-back
2 base 0100000000 mask FF00000000 write-back
3 base 0200000000 mask FE00000000 write-back
4 base 0400000000 mask FC00000000 write-back
5 base 0800000000 mask FFC0000000 write-back
6 base 0840000000 mask FFE0000000 write-back
7 base 0860000000 mask FFF0000000 write-back
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000090000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x8c146 max_arch_pfn = 0x400000000
e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000001000 (usable)
modified: 0000000000001000 - 0000000000006000 (reserved)
modified: 0000000000006000 - 000000000009c000 (usable)
modified: 000000000009c000 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000008c146000 (usable)
modified: 000000008c146000 - 000000008d546000 (ACPI NVS)
modified: 000000008d546000 - 000000008f602000 (ACPI data)
modified: 000000008f602000 - 000000008f64f000 (reserved)
modified: 000000008f64f000 - 000000008f6e2000 (ACPI data)
modified: 000000008f6e2000 - 000000008f6eb000 (ACPI NVS)
modified: 000000008f6eb000 - 000000008f6f0000 (ACPI data)
modified: 000000008f6f0000 - 000000008f7cf000 (ACPI NVS)
modified: 000000008f7cf000 - 000000008f800000 (ACPI data)
modified: 000000008f800000 - 0000000090000000 (reserved)
modified: 00000000a0000000 - 00000000b0000000 (reserved)
modified: 00000000fc000000 - 00000000fd000000 (reserved)
modified: 00000000fed1c000 - 00000000fed20000 (reserved)
modified: 00000000ff800000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000870000000 (usable)
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-000000008c146000
0000000000 - 0080000000 page 1G
0080000000 - 008c000000 page 2M
008c000000 - 008c146000 page 4k
kernel direct mapping tables up to 8c146000 @ 8000-b000
init_memory_mapping: 0000000100000000-0000000870000000
0100000000 - 0840000000 page 1G
0840000000 - 0870000000 page 2M
kernel direct mapping tables up to 870000000 @ a000-c000
RAMDISK: 3793c000 - 37fef03c
ACPI: RSDP 00000000000f0410 00024 (v02 Cisco0)
ACPI: XSDT 000000008f7fe120 000A4 (v01 Cisco0 CiscoUCS 00000000 01000013)
ACPI: FACP 000000008f7fc000 000F4 (v04 Cisco0 CiscoUCS 00000000 MSFT 0100000D)
ACPI: DSDT 000000008f7f6000 056BE (v02 Cisco0 CiscoUCS 00000003 MSFT 0100000D)
ACPI: FACS 000000008f6f0000 00040
ACPI: APIC 000000008f7f5000 001A8 (v02 Cisco0 CiscoUCS 00000000 MSFT 0100000D)
ACPI: MCFG 000000008f7f4000 0003C (v01 Cisco0 CiscoUCS 00000001 MSFT 0100000D)
ACPI: HPET 000000008f7f3000 00038 (v01 Cisco0 CiscoUCS 00000001 MSFT 0100000D)
ACPI: SLIT 000000008f7f2000 00030 (v01 Cisco0 CiscoUCS 00000001 MSFT 0100000D)
ACPI: SRAT 000000008f7f1000 00430 (v02 Cisco0 CiscoUCS 00000001 MSFT 0100000D)
ACPI: SPCR 000000008f7f0000 00050 (v01 Cisco0 CiscoUCS 00000000 MSFT 0100000D)
ACPI: WDDT 000000008f7ef000 00040 (v01 Cisco0 CiscoUCS 00000000 MSFT 0100000D)
ACPI: SSDT 000000008f7d2000 1C884 (v02 Cisco SSDT PM 00004000 INTL 20090730)
ACPI: SSDT 000000008f7d1000 001D8 (v02 Cisco IPMI 00004000 INTL 20090730)
ACPI: SSDT 000000008f7d0000 0064F (v02 CISCO PMETER 00004000 INTL 20090730)
ACPI: HEST 000000008f6ef000 000A8 (v01 Cisco CiscoTbl 00000001 CISC 00000001)
ACPI: BERT 000000008f6ee000 00030 (v01 Cisco CiscoTbl 00000001 CISC 00000001)
ACPI: ERST 000000008f6ed000 00230 (v01 Cisco CiscoTbl 00000001 CISC 00000001)
ACPI: EINJ 000000008f6ec000 00130 (v01 Cisco CiscoTbl 00000001 CISC 00000001)
ACPI: DMAR 000000008f6eb000 001A8 (v01 Cisco0 CiscoUCS 00000001 MSFT 0100000D)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 1 -> APIC 32 -> Node 1
SRAT: PXM 0 -> APIC 2 -> Node 0
SRAT: PXM 1 -> APIC 34 -> Node 1
SRAT: PXM 0 -> APIC 4 -> Node 0
SRAT: PXM 1 -> APIC 36 -> Node 1
SRAT: PXM 0 -> APIC 16 -> Node 0
SRAT: PXM 1 -> APIC 48 -> Node 1
SRAT: PXM 0 -> APIC 18 -> Node 0
SRAT: PXM 1 -> APIC 50 -> Node 1
SRAT: PXM 0 -> APIC 20 -> Node 0
SRAT: PXM 1 -> APIC 52 -> Node 1
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 33 -> Node 1
SRAT: PXM 0 -> APIC 3 -> Node 0
SRAT: PXM 1 -> APIC 35 -> Node 1
SRAT: PXM 0 -> APIC 5 -> Node 0
SRAT: PXM 1 -> APIC 37 -> Node 1
SRAT: PXM 0 -> APIC 17 -> Node 0
SRAT: PXM 1 -> APIC 49 -> Node 1
SRAT: PXM 0 -> APIC 19 -> Node 0
SRAT: PXM 1 -> APIC 51 -> Node 1
SRAT: PXM 0 -> APIC 21 -> Node 0
SRAT: PXM 1 -> APIC 53 -> Node 1
SRAT: Node 0 PXM 0 0-90000000
SRAT: Node 0 PXM 0 100000000-470000000
SRAT: Node 1 PXM 1 470000000-870000000
NUMA: Allocated memnodemap from b080 - b200
NUMA: Using 28 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000470000000
NODE_DATA [000000000000b200 - 000000000003f1ff]
bootmap [0000000000100000 - 000000000018dfff] pages 8e
(10 early reservations) ==> bootmem [0000000000 - 0470000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0001cdad78] TEXT DATA BSS ==> [0001000000 - 0001cdad78]
#3 [003793c000 - 0037fef03c] RAMDISK ==> [003793c000 - 0037fef03c]
#4 [000009c000 - 0000100000] BIOS reserved ==> [000009c000 - 0000100000]
#5 [0001cdb000 - 0001cdb2d4] BRK ==> [0001cdb000 - 0001cdb2d4]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
#8 [000000b000 - 000000b030] ACPI SLIT ==> [000000b000 - 000000b030]
#9 [000000b080 - 000000b200] MEMNODEMAP ==> [000000b080 - 000000b200]
Bootmem setup node 1 0000000470000000-0000000870000000
NODE_DATA [0000000470000080 - 000000047003407f]
bootmap [0000000470035000 - 00000004700b4fff] pages 80
(10 early reservations) ==> bootmem [0470000000 - 0870000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 0001cdad78] TEXT DATA BSS
#3 [003793c000 - 0037fef03c] RAMDISK
#4 [000009c000 - 0000100000] BIOS reserved
#5 [0001cdb000 - 0001cdb2d4] BRK
#6 [0000008000 - 000000a000] PGTABLE
#7 [000000a000 - 000000b000] PGTABLE
#8 [000000b000 - 000000b030] ACPI SLIT
#9 [000000b080 - 000000b200] MEMNODEMAP
found SMP MP-table at [ffff8800000fc690] fc690
[ffffea000f880000-ffffea000f9fffff] potential offnode page_structs
[ffffea0000000000-ffffea000f9fffff] PMD -> [ffff880001e00000-ffff88000fffffff] on node 0
[ffffea000fa00000-ffffea001d9fffff] PMD -> [ffff880470200000-ffff88047e1fffff] on node 1
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00870000
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000000 -> 0x00000001
0: 0x00000006 -> 0x0000009c
0: 0x00000100 -> 0x0008c146
0: 0x00100000 -> 0x00470000
1: 0x00470000 -> 0x00870000
On node 0 totalpages: 4178141
DMA zone: 56 pages used for memmap
DMA zone: 106 pages reserved
DMA zone: 3829 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 555390 pages, LIFO batch:31
Normal zone: 49280 pages used for memmap
Normal zone: 3555200 pages, LIFO batch:31
On node 1 totalpages: 4194304
Normal zone: 57344 pages used for memmap
Normal zone: 4136960 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x30] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x32] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x34] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x31] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x33] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x35] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec90000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec90000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a401 base: 0xfed00000
SMP: Allowing 24 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 0000000000001000 - 0000000000006000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000008c146000 - 000000008d546000
PM: Registered nosave memory: 000000008d546000 - 000000008f602000
PM: Registered nosave memory: 000000008f602000 - 000000008f64f000
PM: Registered nosave memory: 000000008f64f000 - 000000008f6e2000
PM: Registered nosave memory: 000000008f6e2000 - 000000008f6eb000
PM: Registered nosave memory: 000000008f6eb000 - 000000008f6f0000
PM: Registered nosave memory: 000000008f6f0000 - 000000008f7cf000
PM: Registered nosave memory: 000000008f7cf000 - 000000008f800000
PM: Registered nosave memory: 000000008f800000 - 0000000090000000
PM: Registered nosave memory: 0000000090000000 - 00000000a0000000
PM: Registered nosave memory: 00000000a0000000 - 00000000b0000000
PM: Registered nosave memory: 00000000b0000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fd000000
PM: Registered nosave memory: 00000000fd000000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000ff800000
PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
Allocating PCI resources starting at b0000000 (gap: b0000000:4c000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:24 nr_cpu_ids:24 nr_node_ids:2
PERCPU: Embedded 28 pages/cpu @ffff880010200000 s82200 r8192 d24296 u131072
pcpu-alloc: s82200 r8192 d24296 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 02 04 06 08 10 12 14 16 18 20 22 -- -- -- --
pcpu-alloc: [1] 01 03 05 07 09 11 13 15 17 19 21 23 -- -- -- --
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 8251379
Policy zone: Normal
Kernel command line: root=/dev/system/root resume=/dev/system/swap splash=silent showopts
bootsplash: silent mode.
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff88001037c000 - ffff88001437c000
software IO TLB at phys 0x1037c000 - 0x1437c000
Memory: 32939348k/35389440k available (3733k kernel code, 1899660k absent, 550432k reserved, 5660k data, 980k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1008
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 335544320 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2261.017 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4522.03 BogoMIPS (lpj=9044068)
pid_max: default: 32768 minimum: 301
kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: Westmere events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
ACPI: Core revision 20090903
DMAR: Host address width 40
DMAR: DRHD base: 0x000000fe710000 flags: 0x1
IOMMU fe710000: ver 1:0 cap c90780106f0462 ecap f020fe
DMAR: RMRR base: 0x0000008f62f000 end: 0x0000008f631fff
DMAR: RMRR base: 0x0000008f61a000 end: 0x0000008f61afff
DMAR: RMRR base: 0x0000008f617000 end: 0x0000008f617fff
DMAR: RMRR base: 0x0000008f614000 end: 0x0000008f614fff
DMAR: RMRR base: 0x0000008f611000 end: 0x0000008f611fff
DMAR: RMRR base: 0x0000008f60e000 end: 0x0000008f60efff
DMAR: RMRR base: 0x0000008f60b000 end: 0x0000008f60bfff
DMAR: RMRR base: 0x0000008f608000 end: 0x0000008f608fff
DMAR: RMRR base: 0x0000008f605000 end: 0x0000008f605fff
DMAR: No ATSR found
IOAPIC id 8 under DRHD base 0xfe710000
IOAPIC id 9 under DRHD base 0xfe710000
Enabled IRQ remapping in xapic mode
Setting APIC routing to physical flat
alloc irq_desc for 48 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU L5640 @ 2.27GHz stepping 02
Booting Node 1, Processors #1 Ok.
Booting Node 0, Processors #2 Ok.
Booting Node 1, Processors #3 Ok.
Booting Node 0, Processors #4 Ok.
Booting Node 1, Processors #5 Ok.
Booting Node 0, Processors #6 Ok.
Booting Node 1, Processors #7 Ok.
Booting Node 0, Processors #8 Ok.
Booting Node 1, Processors #9 Ok.
Booting Node 0, Processors #10 Ok.
Booting Node 1, Processors #11 Ok.
Booting Node 0, Processors #12 Ok.
Booting Node 1, Processors #13 Ok.
Booting Node 0, Processors #14 Ok.
Booting Node 1, Processors #15 Ok.
Booting Node 0, Processors #16 Ok.
Booting Node 1, Processors #17 Ok.
Booting Node 0, Processors #18 Ok.
Booting Node 1, Processors #19 Ok.
Booting Node 0, Processors #20 Ok.
Booting Node 1, Processors #21 Ok.
Booting Node 0, Processors #22 Ok.
Booting Node 1, Processors #23 Ok.
Brought up 24 CPUs
Total of 24 processors activated (108526.89 BogoMIPS).
devtmpfs: initialized
regulator: core version 0.5
Time: 10:39:41 Date: 07/24/12
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base a0000000 segment 0 buses 0 - 255
PCI: MCFG area at a0000000 reserved in E820
PCI: Using MMCONFIG at a0000000 - afffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:13.0: reg 10 32bit mmio: [0xb1f23000-0xb1f23fff]
pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
pci 0000:00:13.0: PME# disabled
pci 0000:00:16.0: reg 10 64bit mmio: [0xb1f00000-0xb1f03fff]
pci 0000:00:16.1: reg 10 64bit mmio: [0xb1f04000-0xb1f07fff]
pci 0000:00:16.2: reg 10 64bit mmio: [0xb1f08000-0xb1f0bfff]
pci 0000:00:16.3: reg 10 64bit mmio: [0xb1f0c000-0xb1f0ffff]
pci 0000:00:16.4: reg 10 64bit mmio: [0xb1f10000-0xb1f13fff]
pci 0000:00:16.5: reg 10 64bit mmio: [0xb1f14000-0xb1f17fff]
pci 0000:00:16.6: reg 10 64bit mmio: [0xb1f18000-0xb1f1bfff]
pci 0000:00:16.7: reg 10 64bit mmio: [0xb1f1c000-0xb1f1ffff]
pci 0000:00:1a.0: reg 20 io port: [0x40c0-0x40df]
pci 0000:00:1a.1: reg 20 io port: [0x40a0-0x40bf]
pci 0000:00:1a.2: reg 20 io port: [0x4080-0x409f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xb1f21000-0xb1f213ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x4060-0x407f]
pci 0000:00:1d.1: reg 20 io port: [0x4040-0x405f]
pci 0000:00:1d.2: reg 20 io port: [0x4020-0x403f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xb1f20000-0xb1f203ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0600 (mask 003f)
pci 0000:00:1f.3: reg 10 64bit mmio: [0xb1f22000-0xb1f220ff]
pci 0000:00:1f.3: reg 20 io port: [0x4000-0x401f]
pci 0000:01:00.0: reg 10 io port: [0x3000-0x30ff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xb1e10000-0xb1e13fff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xb1e00000-0xb1e0ffff]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0xffe00000-0xffffffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xb1e00000-0xb1efffff]
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: PCI bridge to [bus 03-03]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:07.0: PCI bridge to [bus 04-0b]
pci 0000:00:07.0: bridge io port: [0x1000-0x2fff]
pci 0000:00:07.0: bridge 32bit mmio: [0xb1900000-0xb1dfffff]
pci 0000:05:00.0: reg 10 64bit mmio: [0xb1d00000-0xb1d0ffff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:04:00.0: PCI bridge to [bus 05-0b]
pci 0000:04:00.0: bridge io port: [0x1000-0x2fff]
pci 0000:04:00.0: bridge 32bit mmio: [0xb1900000-0xb1dfffff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:05:00.0: PCI bridge to [bus 06-0b]
pci 0000:05:00.0: bridge io port: [0x1000-0x2fff]
pci 0000:05:00.0: bridge 32bit mmio: [0xb1900000-0xb1cfffff]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
pci 0000:07:01.0: PME# disabled
pci 0000:07:02.0: PME# supported from D0 D3hot D3cold
pci 0000:07:02.0: PME# disabled
pci 0000:07:03.0: PME# supported from D0 D3hot D3cold
pci 0000:07:03.0: PME# disabled
pci 0000:06:00.0: PCI bridge to [bus 07-0b]
pci 0000:06:00.0: bridge io port: [0x1000-0x2fff]
pci 0000:06:00.0: bridge 32bit mmio: [0xb1900000-0xb1cfffff]
pci 0000:08:00.0: reg 10 64bit mmio: [0xb1c00000-0xb1c07fff]
pci 0000:08:00.0: reg 18 64bit mmio: [0xb1c08000-0xb1c09fff]
pci 0000:07:00.0: PCI bridge to [bus 08-08]
pci 0000:07:00.0: bridge 32bit mmio: [0xb1c00000-0xb1cfffff]
pci 0000:09:00.0: reg 10 64bit mmio: [0xb1b00000-0xb1b07fff]
pci 0000:09:00.0: reg 18 64bit mmio: [0xb1b08000-0xb1b09fff]
pci 0000:07:01.0: PCI bridge to [bus 09-09]
pci 0000:07:01.0: bridge 32bit mmio: [0xb1b00000-0xb1bfffff]
pci 0000:0a:00.0: reg 10 64bit mmio: [0xb1a00000-0xb1a07fff]
pci 0000:0a:00.0: reg 18 64bit mmio: [0xb1a08000-0xb1a09fff]
pci 0000:0a:00.0: reg 20 io port: [0x2000-0x207f]
pci 0000:0a:00.0: reg 30 32bit mmio pref: [0xfffff000-0xffffffff]
pci 0000:07:02.0: PCI bridge to [bus 0a-0a]
pci 0000:07:02.0: bridge io port: [0x2000-0x2fff]
pci 0000:07:02.0: bridge 32bit mmio: [0xb1a00000-0xb1afffff]
pci 0000:0b:00.0: reg 10 64bit mmio: [0xb1900000-0xb1907fff]
pci 0000:0b:00.0: reg 18 64bit mmio: [0xb1908000-0xb1909fff]
pci 0000:0b:00.0: reg 20 io port: [0x1000-0x107f]
pci 0000:0b:00.0: reg 30 32bit mmio pref: [0xfffff000-0xffffffff]
pci 0000:07:03.0: PCI bridge to [bus 0b-0b]
pci 0000:07:03.0: bridge io port: [0x1000-0x1fff]
pci 0000:07:03.0: bridge 32bit mmio: [0xb1900000-0xb19fffff]
pci 0000:00:08.0: PCI bridge to [bus 0c-0c]
pci 0000:00:09.0: PCI bridge to [bus 0d-0d]
pci 0000:00:0a.0: PCI bridge to [bus 0e-0e]
pci 0000:00:1c.0: PCI bridge to [bus 0f-0f]
pci 0000:10:00.0: reg 10 32bit mmio pref: [0xb0000000-0xb0ffffff]
pci 0000:10:00.0: reg 14 32bit mmio: [0xb1800000-0xb1803fff]
pci 0000:10:00.0: reg 18 32bit mmio: [0xb1000000-0xb17fffff]
pci 0000:10:00.0: reg 30 32bit mmio pref: [0xffff0000-0xffffffff]
pci 0000:10:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 10-10]
pci 0000:00:1c.4: bridge 32bit mmio: [0xb1000000-0xb18fffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xb0000000-0xb0ffffff]
pci 0000:00:1c.5: PCI bridge to [bus 11-11]
pci 0000:00:1e.0: PCI bridge to [bus 12-12] (subtractive decode)
pci 0000:00:1e.0: bridge window [0x00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [0x000000-0xffffffffffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:10:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: ioport range 0x500-0x57f has been reserved
system 00:07: ioport range 0x400-0x47f has been reserved
system 00:07: ioport range 0x800-0x81f has been reserved
system 00:07: ioport range 0xca2-0xca3 has been reserved
system 00:07: ioport range 0x600-0x63f has been reserved
system 00:07: ioport range 0x880-0x883 has been reserved
system 00:07: ioport range 0xca4-0xca5 has been reserved
system 00:07: iomem range 0xfed1c000-0xfed3fffe could not be reserved
system 00:07: iomem range 0xff000000-0xffffffff could not be reserved
system 00:07: iomem range 0xfee00000-0xfeefffff has been reserved
system 00:07: iomem range 0xfe900000-0xfe90001f has been reserved
system 00:07: iomem range 0xfea00000-0xfea0001f has been reserved
system 00:07: iomem range 0xfed1b000-0xfed1bfff has been reserved
pci 0000:01:00.0: BAR 6: no parent found for of device [0xffe00000-0xffffffff]
pci 0000:0a:00.0: BAR 6: no parent found for of device [0xfffff000-0xffffffff]
pci 0000:0b:00.0: BAR 6: no parent found for of device [0xfffff000-0xffffffff]
pci 0000:10:00.0: BAR 6: no parent found for of device [0xffff0000-0xffffffff]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x3000-0x3fff
pci 0000:00:01.0: MEM window: 0xb1e00000-0xb1efffff
pci 0000:00:01.0: PREFETCH window: 0xb2000000-0xb21fffff
pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
pci 0000:00:02.0: IO window: disabled
pci 0000:00:02.0: MEM window: disabled
pci 0000:00:02.0: PREFETCH window: disabled
pci 0000:00:03.0: PCI bridge, secondary bus 0000:03
pci 0000:00:03.0: IO window: disabled
pci 0000:00:03.0: MEM window: disabled
pci 0000:00:03.0: PREFETCH window: disabled
pci 0000:07:00.0: PCI bridge, secondary bus 0000:08
pci 0000:07:00.0: IO window: disabled
pci 0000:07:00.0: MEM window: 0xb1c00000-0xb1cfffff
pci 0000:07:00.0: PREFETCH window: disabled
pci 0000:07:01.0: PCI bridge, secondary bus 0000:09
pci 0000:07:01.0: IO window: disabled
pci 0000:07:01.0: MEM window: 0xb1b00000-0xb1bfffff
pci 0000:07:01.0: PREFETCH window: disabled
pci 0000:07:02.0: PCI bridge, secondary bus 0000:0a
pci 0000:07:02.0: IO window: 0x2000-0x2fff
pci 0000:07:02.0: MEM window: 0xb1a00000-0xb1afffff
pci 0000:07:02.0: PREFETCH window: 0xb2200000-0xb22fffff
pci 0000:07:03.0: PCI bridge, secondary bus 0000:0b
pci 0000:07:03.0: IO window: 0x1000-0x1fff
pci 0000:07:03.0: MEM window: 0xb1900000-0xb19fffff
pci 0000:07:03.0: PREFETCH window: 0xb2300000-0xb23fffff
pci 0000:06:00.0: PCI bridge, secondary bus 0000:07
pci 0000:06:00.0: IO window: 0x1000-0x2fff
pci 0000:06:00.0: MEM window: 0xb1900000-0xb1cfffff
pci 0000:06:00.0: PREFETCH window: 0xb2200000-0xb23fffff
pci 0000:05:00.0: PCI bridge, secondary bus 0000:06
pci 0000:05:00.0: IO window: 0x1000-0x2fff
pci 0000:05:00.0: MEM window: 0xb1900000-0xb1cfffff
pci 0000:05:00.0: PREFETCH window: 0xb2200000-0xb23fffff
pci 0000:04:00.0: PCI bridge, secondary bus 0000:05
pci 0000:04:00.0: IO window: 0x1000-0x2fff
pci 0000:04:00.0: MEM window: 0xb1900000-0xb1dfffff
pci 0000:04:00.0: PREFETCH window: 0xb2200000-0xb23fffff
pci 0000:00:07.0: PCI bridge, secondary bus 0000:04
pci 0000:00:07.0: IO window: 0x1000-0x2fff
pci 0000:00:07.0: MEM window: 0xb1900000-0xb1dfffff
pci 0000:00:07.0: PREFETCH window: 0xb2200000-0xb23fffff
pci 0000:00:08.0: PCI bridge, secondary bus 0000:0c
pci 0000:00:08.0: IO window: disabled
pci 0000:00:08.0: MEM window: disabled
pci 0000:00:08.0: PREFETCH window: disabled
pci 0000:00:09.0: PCI bridge, secondary bus 0000:0d
pci 0000:00:09.0: IO window: disabled
pci 0000:00:09.0: MEM window: disabled
pci 0000:00:09.0: PREFETCH window: disabled
pci 0000:00:0a.0: PCI bridge, secondary bus 0000:0e
pci 0000:00:0a.0: IO window: disabled
pci 0000:00:0a.0: MEM window: disabled
pci 0000:00:0a.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0f
pci 0000:00:1c.0: IO window: 0x5000-0x5fff
pci 0000:00:1c.0: MEM window: 0xb2400000-0xb25fffff
pci 0000:00:1c.0: PREFETCH window: 0x000000b2600000-0x000000b27fffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:10
pci 0000:00:1c.4: IO window: 0x6000-0x6fff
pci 0000:00:1c.4: MEM window: 0xb1000000-0xb18fffff
pci 0000:00:1c.4: PREFETCH window: 0x000000b0000000-0x000000b0ffffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:11
pci 0000:00:1c.5: IO window: 0x7000-0x7fff
pci 0000:00:1c.5: MEM window: 0xb2800000-0xb29fffff
pci 0000:00:1c.5: PREFETCH window: 0x000000b2a00000-0x000000b2bfffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:12
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:01.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
pci 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:02.0: PCI INT A -> GSI 29 (level, low) -> IRQ 29
pci 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:03.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
pci 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
pci 0000:00:07.0: setting latency timer to 64
pci 0000:04:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
pci 0000:04:00.0: setting latency timer to 64
pci 0000:05:00.0: setting latency timer to 64
pci 0000:06:00.0: setting latency timer to 64
pci 0000:07:00.0: setting latency timer to 64
pci 0000:07:01.0: setting latency timer to 64
pci 0000:07:02.0: setting latency timer to 64
pci 0000:07:03.0: setting latency timer to 64
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:08.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
pci 0000:00:08.0: setting latency timer to 64
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
pci 0000:00:09.0: setting latency timer to 64
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:0a.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33
pci 0000:00:0a.0: setting latency timer to 64
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:01: resource 1 mem: [0xb1e00000-0xb1efffff]
pci_bus 0000:01: resource 2 pref mem [0xb2000000-0xb21fffff]
pci_bus 0000:04: resource 0 io: [0x1000-0x2fff]
pci_bus 0000:04: resource 1 mem: [0xb1900000-0xb1dfffff]
pci_bus 0000:04: resource 2 pref mem [0xb2200000-0xb23fffff]
pci_bus 0000:05: resource 0 io: [0x1000-0x2fff]
pci_bus 0000:05: resource 1 mem: [0xb1900000-0xb1dfffff]
pci_bus 0000:05: resource 2 pref mem [0xb2200000-0xb23fffff]
pci_bus 0000:06: resource 0 io: [0x1000-0x2fff]
pci_bus 0000:06: resource 1 mem: [0xb1900000-0xb1cfffff]
pci_bus 0000:06: resource 2 pref mem [0xb2200000-0xb23fffff]
pci_bus 0000:07: resource 0 io: [0x1000-0x2fff]
pci_bus 0000:07: resource 1 mem: [0xb1900000-0xb1cfffff]
pci_bus 0000:07: resource 2 pref mem [0xb2200000-0xb23fffff]
pci_bus 0000:08: resource 1 mem: [0xb1c00000-0xb1cfffff]
pci_bus 0000:09: resource 1 mem: [0xb1b00000-0xb1bfffff]
pci_bus 0000:0a: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:0a: resource 1 mem: [0xb1a00000-0xb1afffff]
pci_bus 0000:0a: resource 2 pref mem [0xb2200000-0xb22fffff]
pci_bus 0000:0b: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:0b: resource 1 mem: [0xb1900000-0xb19fffff]
pci_bus 0000:0b: resource 2 pref mem [0xb2300000-0xb23fffff]
pci_bus 0000:0f: resource 0 io: [0x5000-0x5fff]
pci_bus 0000:0f: resource 1 mem: [0xb2400000-0xb25fffff]
pci_bus 0000:0f: resource 2 pref mem [0xb2600000-0xb27fffff]
pci_bus 0000:10: resource 0 io: [0x6000-0x6fff]
pci_bus 0000:10: resource 1 mem: [0xb1000000-0xb18fffff]
pci_bus 0000:10: resource 2 pref mem [0xb0000000-0xb0ffffff]
pci_bus 0000:11: resource 0 io: [0x7000-0x7fff]
pci_bus 0000:11: resource 1 mem: [0xb2800000-0xb29fffff]
pci_bus 0000:11: resource 2 pref mem [0xb2a00000-0xb2bfffff]
pci_bus 0000:12: resource 4 io: [0x00-0xffff]
pci_bus 0000:12: resource 5 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1a.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1a.0: PCI INT D disabled
pci 0000:00:1a.1: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1a.1: PCI INT D disabled
pci 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1a.2: PCI INT D disabled
pci 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1a.7: PCI INT D disabled
pci 0000:00:1d.0: PCI INT D -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1d.0: PCI INT D disabled
pci 0000:00:1d.1: PCI INT D -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1d.1: PCI INT D disabled
pci 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1d.2: PCI INT D disabled
pci 0000:00:1d.7: PCI INT D -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1d.7: PCI INT D disabled
pci 0000:10:00.0: Boot video device
Unpacking initramfs...
Freeing initrd memory: 6860k freed
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1343126380.508:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 16087
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
alloc irq_desc for 49 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:01.0: irq 49 for MSI/MSI-X
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 50 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:02.0: irq 50 for MSI/MSI-X
pcieport 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 51 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:03.0: irq 51 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 52 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:07.0: irq 52 for MSI/MSI-X
pcieport 0000:00:07.0: setting latency timer to 64
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:08.0: irq 53 for MSI/MSI-X
pcieport 0000:00:08.0: setting latency timer to 64
alloc irq_desc for 54 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:09.0: irq 54 for MSI/MSI-X
pcieport 0000:00:09.0: setting latency timer to 64
alloc irq_desc for 55 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:0a.0: irq 55 for MSI/MSI-X
pcieport 0000:00:0a.0: setting latency timer to 64
alloc irq_desc for 56 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.0: irq 56 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 57 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.4: irq 57 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 58 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.5: irq 58 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
alloc irq_desc for 59 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:04:00.0: irq 59 for MSI/MSI-X
pcieport 0000:04:00.0: setting latency timer to 64
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
aer 0000:00:07.0:pcie02: service driver aer loaded
aer 0000:00:08.0:pcie02: service driver aer loaded
aer 0000:00:09.0:pcie02: service driver aer loaded
aer 0000:00:0a.0:pcie02: service driver aer loaded
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Fixed MDIO Bus: probed
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
PM: Checking hibernation image partition /dev/system/swap
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 4:3:680
Freeing unused kernel memory: 980k freed
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 344k freed
Freeing unused kernel memory: 1444k freed
SCSI subsystem initialized
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.1.0 loaded
megasas: 00.00.04.27-SL1 Tue. Mar. 02 14:13:02 EST 2009
fnic: Cisco FCoE HBA Driver, ver 1.5.0.1
alloc irq_desc for 39 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
fnic 0000:0a:00.0: PCI INT A -> GSI 39 (level, low) -> IRQ 39
fnic 0000:0a:00.0: setting latency timer to 64
scsi host0: vNIC MAC addr 00:25:b5:09:10:4f wq/wq_copy/rq 64/512/64
scsi host0: vNIC node wwn 20000025b5091fcf port wwn 20000025b509104f
scsi host0: vNIC ed_tov 2000 ra_tov 10000
scsi host0: vNIC mtu 2048 intr timer 0
scsi host0: vNIC flags 0x0 luns per tgt 256
scsi host0: vNIC flogi_retries 8 flogi timeout 4000
scsi host0: vNIC plogi retries 8 plogi timeout 20000
scsi host0: vNIC io throttle count 256 link dn timeout 30000
scsi host0: vNIC port dn io retries 30 port dn timeout 30000
alloc irq_desc for 60 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
fnic 0000:0a:00.0: irq 60 for MSI/MSI-X
alloc irq_desc for 61 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
fnic 0000:0a:00.0: irq 61 for MSI/MSI-X
alloc irq_desc for 62 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
fnic 0000:0a:00.0: irq 62 for MSI/MSI-X
alloc irq_desc for 63 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
fnic 0000:0a:00.0: irq 63 for MSI/MSI-X
scsi host0: vNIC interrupt mode: MSI-X
scsi host0: vNIC resources avail: wq 2 cp_wq 1 raw_wq 1 rq 1 cq 3 intr 4
scsi host0: firmware uses non-FIP mode
scsi0 : fnic
alloc irq_desc for 38 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
fnic 0000:0b:00.0: PCI INT A -> GSI 38 (level, low) -> IRQ 38
fnic 0000:0b:00.0: setting latency timer to 64
scsi host1: vNIC MAC addr 00:25:b5:09:12:4f wq/wq_copy/rq 64/512/64
scsi host1: vNIC node wwn 20000025b5091fcf port wwn 20000025b509124f
scsi host1: vNIC ed_tov 2000 ra_tov 10000
scsi host1: vNIC mtu 2048 intr timer 0
scsi host1: vNIC flags 0x0 luns per tgt 256
scsi host1: vNIC flogi_retries 8 flogi timeout 4000
scsi host1: vNIC plogi retries 8 plogi timeout 20000
scsi host1: vNIC io throttle count 256 link dn timeout 30000
scsi host1: vNIC port dn io retries 30 port dn timeout 30000
alloc irq_desc for 64 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
fnic 0000:0b:00.0: irq 64 for MSI/MSI-X
alloc irq_desc for 65 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
fnic 0000:0b:00.0: irq 65 for MSI/MSI-X
alloc irq_desc for 66 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
fnic 0000:0b:00.0: irq 66 for MSI/MSI-X
alloc irq_desc for 67 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
fnic 0000:0b:00.0: irq 67 for MSI/MSI-X
scsi host1: vNIC interrupt mode: MSI-X
scsi host1: vNIC resources avail: wq 2 cp_wq 1 raw_wq 1 rq 1 cq 3 intr 4
scsi host1: firmware uses non-FIP mode
scsi1 : fnic
Monitor-Mwait will be used to enter C-1 state
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
udevd version 128 started
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xb1f21000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32.59-0.3-default ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 16, io mem 0xb1f20000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32.59-0.3-default ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 19, io base 0x000040c0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32.59-0.3-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 19, io base 0x000040a0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32.59-0.3-default uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00004080
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32.59-0.3-default uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00004060
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32.59-0.3-default uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 16, io base 0x00004040
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32.59-0.3-default uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 16, io base 0x00004020
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.32.59-0.3-default uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
device-mapper: multipath round-robin: version 1.0.0 loaded
emc: device handler registered
hp_sw: device handler registered
rdac: device handler registered
alua: device handler registered
md: linear personality registered for level -1
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb 2-1: New USB device found, idVendor=0424, idProduct=2512
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 2 ports detected
usb 4-1: new full speed USB device using uhci_hcd and address 2
host0: libfc: Link up on port ( 0)
host0: Assigned Port ID 30021
scsi 0:0:0:0: Direct-Access HP OPEN-V 6008 PQ: 0 ANSI: 3
sd 0:0:0:0: [sda] 268435456 512-byte logical blocks: (137 GB/128 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 6b 00 00 08
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
host1: libfc: Link up on port ( 0)
host1: Assigned Port ID 50022
scsi 1:0:0:0: Direct-Access HP OPEN-V 6008 PQ: 0 ANSI: 3
sd 1:0:0:0: [sdb] 268435456 512-byte logical blocks: (137 GB/128 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 6b 00 00 08
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 4-1: New USB device found, idVendor=0624, idProduct=0248
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1: Product: USB Composite Device-0
usb 4-1: Manufacturer: Avocent
usb 4-1: SerialNumber: 20080930
usb 4-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input0
generic-usb 0003:0624:0248.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1a.1-1/input0
input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/input/input1
generic-usb 0003:0624:0248.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1a.1-1/input1
input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.2/input/input2
generic-usb 0003:0624:0248.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1a.1-1/input2
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
kjournald starting. Commit interval 15 seconds
EXT3 FS on dm-6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
udevd version 128 started
ACPI: AC Adapter [P111] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
power_meter ACPI000D:00: Found ACPI power meter.
power_meter ACPI000D:00: Ignoring unsafe software power cap!
dca service started, version 1.12.1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
iTCO_vendor_support: vendor-support=0
ioatdma: Intel(R) QuickData Technology Driver 4.00
alloc irq_desc for 43 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.0: PCI INT A -> GSI 43 (level, low) -> IRQ 43
ioatdma 0000:00:16.0: setting latency timer to 64
alloc irq_desc for 68 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.0: irq 68 for MSI/MSI-X
alloc irq_desc for 44 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.1: PCI INT B -> GSI 44 (level, low) -> IRQ 44
ioatdma 0000:00:16.1: setting latency timer to 64
alloc irq_desc for 69 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.1: irq 69 for MSI/MSI-X
alloc irq_desc for 45 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.2: PCI INT C -> GSI 45 (level, low) -> IRQ 45
ioatdma 0000:00:16.2: setting latency timer to 64
alloc irq_desc for 70 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.2: irq 70 for MSI/MSI-X
alloc irq_desc for 46 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.3: PCI INT D -> GSI 46 (level, low) -> IRQ 46
ioatdma 0000:00:16.3: setting latency timer to 64
alloc irq_desc for 71 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.3: irq 71 for MSI/MSI-X
ioatdma 0000:00:16.4: PCI INT A -> GSI 43 (level, low) -> IRQ 43
ioatdma 0000:00:16.4: setting latency timer to 64
alloc irq_desc for 72 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.4: irq 72 for MSI/MSI-X
ioatdma 0000:00:16.5: PCI INT B -> GSI 44 (level, low) -> IRQ 44
ioatdma 0000:00:16.5: setting latency timer to 64
alloc irq_desc for 73 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.5: irq 73 for MSI/MSI-X
ioatdma 0000:00:16.6: PCI INT C -> GSI 45 (level, low) -> IRQ 45
ioatdma 0000:00:16.6: setting latency timer to 64
alloc irq_desc for 74 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.6: irq 74 for MSI/MSI-X
ioatdma 0000:00:16.7: PCI INT D -> GSI 46 (level, low) -> IRQ 46
ioatdma 0000:00:16.7: setting latency timer to 64
alloc irq_desc for 75 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.7: irq 75 for MSI/MSI-X
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
input: PC Speaker as /devices/platform/pcspkr/input/input5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
iTCO_wdt: No card detected
Fusion MPT base driver 4.22.00.00
Copyright (c) 1999-2008 LSI Corporation
enic: Cisco VIC Ethernet NIC Driver, ver 2.1.1.35
enic 0000:08:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
enic 0000:08:00.0: setting latency timer to 64
enic 0000:08:00.0: vNIC MAC addr 00:25:b5:09:12:4f wq/rq 256/512 mtu 1500
enic 0000:08:00.0: vNIC csum tx/rx yes/yes tso/lro yes/yes rss no intr mode any type min timer 125 usec loopback tag 0x0000
sd 0:0:0:0: Attached scsi generic sg0 type 0
enic 0000:08:00.0: vNIC resources avail: wq 1 rq 1 cq 2 intr 4
alloc irq_desc for 76 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
enic 0000:08:00.0: irq 76 for MSI/MSI-X
alloc irq_desc for 77 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
enic 0000:08:00.0: irq 77 for MSI/MSI-X
sd 1:0:0:0: Attached scsi generic sg1 type 0
alloc irq_desc for 78 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
enic 0000:08:00.0: irq 78 for MSI/MSI-X
alloc irq_desc for 79 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
enic 0000:08:00.0: irq 79 for MSI/MSI-X
enic 0000:08:00.0: vNIC resources used: wq 1 rq 1 cq 2 intr 4 intr mode MSI-X
alloc irq_desc for 37 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
enic 0000:09:00.0: PCI INT A -> GSI 37 (level, low) -> IRQ 37
enic 0000:09:00.0: setting latency timer to 64
Fusion MPT SAS Host driver 4.22.00.00
mptsas 0000:01:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
mptbase: ioc0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total memory = 32948980 kB
enic 0000:09:00.0: vNIC MAC addr 00:25:b5:09:10:4f wq/rq 256/512 mtu 1500
enic 0000:09:00.0: vNIC csum tx/rx yes/yes tso/lro yes/yes rss no intr mode any type min timer 125 usec loopback tag 0x0000
enic 0000:09:00.0: vNIC resources avail: wq 1 rq 1 cq 2 intr 4
alloc irq_desc for 80 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
enic 0000:09:00.0: irq 80 for MSI/MSI-X
alloc irq_desc for 81 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
enic 0000:09:00.0: irq 81 for MSI/MSI-X
alloc irq_desc for 82 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
enic 0000:09:00.0: irq 82 for MSI/MSI-X
alloc irq_desc for 83 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
enic 0000:09:00.0: irq 83 for MSI/MSI-X
enic 0000:09:00.0: vNIC resources used: wq 1 rq 1 cq 2 intr 4 intr mode MSI-X
mptbase: ioc0: Initiating bringup
ioc0: LSISAS1064E B3: Capabilities={Initiator}
mptsas 0000:01:00.0: setting latency timer to 64
scsi2 : ioc0: LSISAS1064E B3, FwRev=01200400h, Ports=1, MaxQ=277, IRQ=28
Adding 4194296k swap on /dev/mapper/system-swap. Priority:-1 extents:1 across:4194296k
loop: module loaded
kjournald starting. Commit interval 15 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 15 seconds
EXT3 FS on dm-9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 15 seconds
EXT3 FS on dm-5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.13)
microcode: CPU0 sig=0x206c2, pf=0x1, revision=0x15
microcode: CPU1 sig=0x206c2, pf=0x1, revision=0x15
microcode: CPU2 sig=0x206c2, pf=0x1, revision=0x15
microcode: CPU3 sig=0x206c2, pf=0x1, revision=0x15
microcode: CPU4 sig=0x206c2, pf=0x1, revision=0x15
microcode: CPU5 sig=0x206c2, pf=0x1, revision=0x15
microcode: CPU6 sig=0x206c2, pf=0x1, revision=0x15
microcode: CPU7 sig=0x206c2, pf=0x1, revision=0x15
microcode: CPU8 sig=0x206c2, pf=0x1, revision=0x15
microcode: CPU9 sig=0x206c2, pf=0x1, revision=0x15
microcode: CPU10 sig=0x206c2, pf=0x1, revision=0x15
microcode: CPU11 sig=0x206c2, pf=0x1, revision=0x15
microcode: CPU12 sig=0x206c2, pf=0x1, revision=0x15
microcode: CPU13 sig=0x206c2, pf=0x1, revision=0x15
microcode: CPU14 sig=0x206c2, pf=0x1, revision=0x15
microcode: CPU15 sig=0x206c2, pf=0x1, revision=0x15
microcode: CPU16 sig=0x206c2, pf=0x1, revision=0x15
microcode: CPU17 sig=0x206c2, pf=0x1, revision=0x15
microcode: CPU18 sig=0x206c2, pf=0x1, revision=0x15
microcode: CPU19 sig=0x206c2, pf=0x1, revision=0x15
microcode: CPU20 sig=0x206c2, pf=0x1, revision=0x15
microcode: CPU21 sig=0x206c2, pf=0x1, revision=0x15
microcode: CPU22 sig=0x206c2, pf=0x1, revision=0x15
microcode: CPU23 sig=0x206c2, pf=0x1, revision=0x15
Microcode Update Driver: v2.00 , Peter Oruba
enic 0000:08:00.0: eth0: Link UP