dmesg - stream-1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-41-generic (buildd@aatxe) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #91-Ubuntu SMP Wed Jun 13 11:44:43 UTC 2012 (Ubuntu 2.6.32-41.91-generic 2.6.32.59+drm33.24)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fffd000 (usable)
BIOS-e820: 000000001fffd000 - 0000000020000000 (reserved)
BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
DMI 2.4 present.
last_pfn = 0x1fffd max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges disabled:
00000-FFFFF uncachable
MTRR variable ranges disabled:
0 disabled
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
PAT not supported by CPU.
CPU MTRRs all blank - virtualized system.
e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000006000 (reserved)
modified: 0000000000006000 - 000000000009dc00 (usable)
modified: 000000000009dc00 - 00000000000a0000 (reserved)
modified: 00000000000f0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000001fffd000 (usable)
modified: 000000001fffd000 - 0000000020000000 (reserved)
modified: 00000000feffc000 - 00000000ff000000 (reserved)
modified: 00000000fffc0000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 00c00000
init_memory_mapping: 0000000000000000-000000001fffd000
Using x86 segment limits to approximate NX protection
0000000000 - 001fffd000 page 4k
kernel direct mapping tables up to 1fffd000 @ 7000-8a000
RAMDISK: 1789b000 - 1803ce6e
ACPI: RSDP 000fdaa0 00014 (v00 BOCHS )
ACPI: RSDT 1fffd6a0 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 1ffffe70 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 1fffd8a0 02560 (v01 BXPC BXDSDT 00000001 INTL 20100528)
ACPI: FACS 1ffffe00 00040
ACPI: SSDT 1fffd800 0009E (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
ACPI: APIC 1fffd720 00072 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
ACPI: HPET 1fffd6e0 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
0MB HIGHMEM available.
511MB LOWMEM available.
mapped low ram: 0 - 1fffd000
low ram: 0 - 1fffd000
node 0 low ram: 00000000 - 1fffd000
node 0 bootmap 00084000 - 00088000
(9 early reservations) ==> bootmem [0000000000 - 001fffd000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00008e5f18] TEXT DATA BSS ==> [0000100000 - 00008e5f18]
#4 [001789b000 - 001803ce6e] RAMDISK ==> [001789b000 - 001803ce6e]
#5 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
#6 [00008e6000 - 00008e9071] BRK ==> [00008e6000 - 00008e9071]
#7 [0000007000 - 0000084000] PGTABLE ==> [0000007000 - 0000084000]
#8 [0000084000 - 0000088000] BOOTMAP ==> [0000084000 - 0000088000]
found SMP MP-table at [c00fdaf0] fdaf0
kvm-clock: cpu 0, msr 0:850721, boot clock
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x0001fffd
HighMem 0x0001fffd -> 0x0001fffd
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x00000002
0: 0x00000006 -> 0x0000009d
0: 0x00000100 -> 0x0001fffd
On node 0 totalpages: 130966
free_area_init_node: node 0, pgdat c07a0a20, node_mem_map c1001000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3961 pages, LIFO batch:0
Normal zone: 992 pages used for memmap
Normal zone: 125981 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0xb008
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
MPTABLE: OEM ID: BOCHSCPU
MPTABLE: Product ID: 0.1
MPTABLE: APIC at: 0xFEE00000
Processor #0 (Bootup-CPU)
BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
I/O APIC #1 Version 17 at 0xFEC00000.
Processors: 1
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000002000 - 0000000000006000
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 20000000 (gap: 20000000:deffc000)
Booting paravirtualized kernel on KVM
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c1405000 s36056 r0 d21288 u65536
pcpu-alloc: s36056 r0 d21288 u65536 alloc=16*4096
pcpu-alloc: [0] 0
kvm-clock: cpu 0, msr 0:140d721, primary cpu clock
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129942
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Initializing CPU#0
allocated 2621380 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00000000:00000000)
Memory: 500012k/524276k available (4699k kernel code, 23572k reserved, 2128k data, 664k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe07fd000 - 0xff7fe000 ( 496 MB)
lowmem : 0xc0000000 - 0xdfffd000 ( 511 MB)
.init : 0xc07ab000 - 0xc0851000 ( 664 kB)
.data : 0xc0596c47 - 0xc07aafc8 (2128 kB)
.text : 0xc0100000 - 0xc0596c47 (4699 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:2304 nr_irqs:256
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Calibrating delay loop (skipped) preset value.. 5851.99 BogoMIPS (lpj=11703992)
Security Framework initialized
AppArmor: AppArmor initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
mce: CPU supports 10 MCE banks
Performance Events: unsupported p6 CPU model 2 no PMU driver, software events only.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 19k freed
ACPI: Core revision 20090903
ACPI: setting ELCR to 0200 (from 0c00)
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21840 entries in 43 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
BIOS bug, local APIC #0 not detected!...
... forcing use of dummy APIC emulation.(tell your hw vendor)
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (5851.99 BogoMIPS).
CPU0 attaching NULL sched-domain.
devtmpfs: initialized
regulator: core version 0.5
Time: 3:19:18 Date: 07/16/12
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfc901, last bus=0
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.1: reg 20 io port: [0xc000-0xc00f]
pci 0000:00:01.2: reg 20 io port: [0xc020-0xc03f]
pci 0000:00:01.3: quirk: region b000-b03f claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: region b100-b10f claimed by PIIX4 SMB
pci 0000:00:02.0: reg 10 32bit mmio pref: [0xf0000000-0xf1ffffff]
pci 0000:00:02.0: reg 14 32bit mmio: [0xf2000000-0xf2000fff]
pci 0000:00:02.0: reg 30 32bit mmio pref: [0xf2010000-0xf201ffff]
pci 0000:00:03.0: reg 10 io port: [0xc100-0xc1ff]
pci 0000:00:03.0: reg 14 32bit mmio: [0xf2020000-0xf20200ff]
pci 0000:00:03.0: reg 30 32bit mmio pref: [0xf2028000-0xf202ffff]
pci 0000:00:04.0: reg 10 io port: [0xc200-0xc23f]
pci 0000:00:05.0: reg 10 io port: [0xc240-0xc25f]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: WMI: Mapper loaded
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 100.000000 MHz counter
Switching to clocksource kvm-clock
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 6 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
CE: hpet increasing min_delta_ns to 5760 nsec
CE: hpet increasing min_delta_ns to 8640 nsec
CE: hpet increasing min_delta_ns to 12960 nsec
CE: hpet increasing min_delta_ns to 19440 nsec
CE: hpet increasing min_delta_ns to 29160 nsec
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
pci 0000:00:01.2: PCI INT D disabled
pci 0000:00:02.0: Boot video device
cpufreq-nforce2: No nForce2 chipset.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1342408758.236:1): initialized
Trying to unpack rootfs image as initramfs...
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.13)
msgmni has been set to 977
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
processor LNXCPU:00: registered as cooling_device0
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
ata_piix 0000:00:01.1: version 2.13
ata_piix 0000:00:01.1: setting latency timer to 64
scsi0 : ata_piix
isapnp: Scanning for PnP cards...
scsi1 : ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
Fixed MDIO Bus: probed
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
uhci_hcd 0000:00:01.2: setting latency timer to 64
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c020
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.1.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Magic number: 4:793:310
tty tty39: hash matches
rtc_cmos 00:01: setting system clock to 2012-07-16 03:27:33 UTC (1342409253)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
isapnp: No Plug & Play device found
Freeing initrd memory: 7815k freed
Freeing unused kernel memory: 664k freed
Write protecting the kernel text: 4700k
Write protecting the kernel read-only data: 1848k
udev: starting version 151
virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
virtio-pci 0000:00:04.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
virtio-pci 0000:00:05.0: setting latency timer to 64
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
8139cp 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11
eth0: RTL-8139C+ at 0xe088a000, 02:16:3e:41:19:f9, IRQ 11
8139cp 0000:00:03.0: setting latency timer to 64
FDC 0 is a S82078B
vda:
8139too Fast Ethernet driver 0.9.28
vda1 vda2 < vda5 >
EXT4-fs (vda1): mounted filesystem with ordered data mode
Adding 280568k swap on /dev/vda5. Priority:-1 extents:1 across:280568k
udev: starting version 151
lp: driver loaded but no devices found
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb0: VGA16 VGA frame buffer device
psmouse serio1: ID: 10 00 64
piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
type=1505 audit(1342409267.467:2): operation="profile_load" pid=539 name="/sbin/dhclient3"
type=1505 audit(1342409267.467:3): operation="profile_load" pid=539 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1505 audit(1342409267.467:4): operation="profile_load" pid=539 name="/usr/lib/connman/scripts/dhclient-script"
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
Console: switching to colour frame buffer device 80x30
eth0: link up, 100Mbps, full-duplex, lpa 0x05E1
type=1505 audit(1342409269.387:5): operation="profile_load" pid=734 name="/usr/share/gdm/guest-session/Xsession"
type=1505 audit(1342409269.399:6): operation="profile_replace" pid=736 name="/sbin/dhclient3"
type=1505 audit(1342409269.423:7): operation="profile_replace" pid=736 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1505 audit(1342409269.423:8): operation="profile_replace" pid=736 name="/usr/lib/connman/scripts/dhclient-script"
type=1505 audit(1342409269.463:9): operation="profile_load" pid=742 name="/usr/bin/evince"
type=1505 audit(1342409269.483:10): operation="profile_load" pid=742 name="/usr/bin/evince-previewer"
type=1505 audit(1342409269.499:11): operation="profile_load" pid=742 name="/usr/bin/evince-thumbnailer"
ppdev: user-space parallel port driver
JBD: barrier-based sync failed on vda1-8 - disabling barriers
eth0: no IPv6 routers present
CE: hpet increasing min_delta_ns to 43740 nsec