dmesg - test
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.4.3-1.fc17.x86_64 (mockbuild@x86-17.phx2.fedoraproject.org) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #1 SMP Mon Jun 18 19:53:17 UTC 2012
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000006fef0000 (usable)
BIOS-e820: 000000006fef0000 - 000000006fef3000 (ACPI NVS)
BIOS-e820: 000000006fef3000 - 000000006ff00000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000190000000 (usable)
NX (Execute Disable) protection: active
DMI 2.3 present.
DMI: /AV8 (VIA K8T800P-8237), BIOS 6.00 PG 05/17/2006
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
AGP bridge at 00:00:00
Aperture from AGP @ 80000000 old size 32 MB
Aperture from AGP @ 80000000 size 1024 MB (APSIZE c00)
last_pfn = 0x190000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-CFFFF uncachable
D0000-D7FFF write-back
D8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0000000000 mask FFC0000000 write-back
1 base 0040000000 mask FFE0000000 write-back
2 base 0060000000 mask FFF0000000 write-back
3 base 006FF00000 mask FFFFF00000 uncachable
4 base 0100000000 mask FF80000000 write-back
5 base 0180000000 mask FFF0000000 write-back
6 base 0080000000 mask FFC0000000 write-combining
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0x6fef0 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f36a0] f36a0
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size 20480
init_memory_mapping: 0000000000000000-000000006fef0000
0000000000 - 006fe00000 page 2M
006fe00000 - 006fef0000 page 4k
kernel direct mapping tables up to 6fef0000 @ 1fffc000-20000000
init_memory_mapping: 0000000100000000-0000000190000000
0100000000 - 0190000000 page 2M
kernel direct mapping tables up to 190000000 @ 6fee8000-6fef0000
RAMDISK: 35e30000 - 36f10000
ACPI: RSDP 00000000000f77d0 00014 (v00 VIAK8T)
ACPI: RSDT 000000006fef3040 00030 (v01 VIAK8T AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 000000006fef30c0 00074 (v01 VIAK8T AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 000000006fef3180 04F8A (v01 VIAK8T AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 000000006fef0000 00040
ACPI: BOOT 000000006fef8180 00028 (v01 VIAK8T AWRDACPI 42302E31 AWRD 00000000)
ACPI: APIC 000000006fef8200 00068 (v01 VIAK8T AWRDACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-0000000190000000
Initmem setup node 0 0000000000000000-0000000190000000
NODE_DATA [000000018ffec000 - 000000018fffffff]
[ffffea0000000000-ffffea00063fffff] PMD -> [ffff88018b600000-ffff88018f5fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00190000
Movable zone start PFN for each node
Early memory PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0006fef0
0: 0x00100000 -> 0x00190000
On node 0 totalpages: 1048191
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3914 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 438064 pages, LIFO batch:31
Normal zone: 9216 pages used for memmap
Normal zone: 580608 pages, LIFO batch:31
Looks like a VIA chipset. Disabling IOMMU. Override with iommu=allowed
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 000000006fef0000 - 000000006fef3000
PM: Registered nosave memory: 000000006fef3000 - 000000006ff00000
PM: Registered nosave memory: 000000006ff00000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at 6ff00000 (gap: 6ff00000:8ed00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88018fc00000 s83008 r8192 d23488 u1048576
pcpu-alloc: s83008 r8192 d23488 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1022586
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 4027428k/6553600k available (6130k kernel code, 2360836k absent, 165336k reserved, 7043k data, 1000k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:8448 nr_irqs:512 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Fast TSC calibration using PIT
Detected 2405.462 MHz processor.
Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 4810.92 BogoMIPS (lpj=2405462)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 006ff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
ACPI: Core revision 20120320
ftrace: allocating 22813 entries in 90 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ stepping 02
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 Ok.
NMI watchdog: enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (9620.98 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x6fef0000-0x6fef2fff] (12288 bytes)
atomic64 test passed for x86-64 platform with CX8 and with SSE
RTC time: 3:33:16, date: 06/27/12
NET: Registered protocol family 16
node 0 link 0: io port [1000, fffff]
TOM: 0000000070000000 aka 1792M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [70000000, ff70ffff]
TOM2: 0000000190000000 aka 6400M
bus: [00, ff] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0x70000000-0xffffffff]
bus: 00 index 3 [mem 0x190000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x70000000-0xfebfffff] (ignored)
PCI: root bus 00: hardware-probed resources
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x70000000-0xffffffff]
pci_bus 0000:00: root bus resource [mem 0x190000000-0xfcffffffff]
pci 0000:00:00.0: [1106:0282] type 00 class 0x060000
pci 0000:00:00.0: reg 10: [mem 0x80000000-0xbfffffff pref]
pci 0000:00:00.1: [1106:1282] type 00 class 0x060000
pci 0000:00:00.2: [1106:2282] type 00 class 0x060000
pci 0000:00:00.3: [1106:3282] type 00 class 0x060000
pci 0000:00:00.4: [1106:4282] type 00 class 0x060000
pci 0000:00:00.7: [1106:7282] type 00 class 0x060000
pci 0000:00:01.0: [1106:b188] type 01 class 0x060400
pci 0000:00:01.0: supports D1
pci 0000:00:07.0: [1106:3044] type 00 class 0x0c0010
pci 0000:00:07.0: reg 10: [mem 0xd0122000-0xd01227ff]
pci 0000:00:07.0: reg 14: [io 0xe300-0xe37f]
pci 0000:00:07.0: supports D2
pci 0000:00:07.0: PME# supported from D2 D3hot D3cold
pci 0000:00:0e.0: [1106:3119] type 00 class 0x020000
pci 0000:00:0e.0: reg 10: [io 0xd000-0xd0ff]
pci 0000:00:0e.0: reg 14: [mem 0xd0120000-0xd01200ff]
pci 0000:00:0e.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:0e.0: supports D1 D2
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0f.0: [1106:3149] type 00 class 0x01018f
pci 0000:00:0f.0: reg 10: [io 0xe800-0xe807]
pci 0000:00:0f.0: reg 14: [io 0xe900-0xe903]
pci 0000:00:0f.0: reg 18: [io 0xe000-0xe007]
pci 0000:00:0f.0: reg 1c: [io 0xe100-0xe103]
pci 0000:00:0f.0: reg 20: [io 0xe200-0xe20f]
pci 0000:00:0f.0: reg 24: [io 0xd400-0xd4ff]
pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.0: reg 20: [io 0xe400-0xe41f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.1: reg 20: [io 0xe500-0xe51f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.2: reg 20: [io 0xe600-0xe61f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
pci 0000:00:10.3: reg 20: [io 0xe700-0xe71f]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
pci 0000:00:10.4: reg 10: [mem 0xd0121000-0xd01210ff]
pci 0000:00:10.4: supports D1 D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:11.0: [1106:3227] type 00 class 0x060100
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
pci 0000:00:11.5: reg 10: [io 0xd800-0xd8ff]
pci 0000:00:11.5: supports D1 D2
pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
pci 0000:01:00.0: [1002:9505] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:01:00.0: reg 14: [io 0xc000-0xc0ff]
pci 0000:01:00.0: reg 18: [mem 0xd0020000-0xd002ffff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd00fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *5
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 *10 11 12)
ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f000 - 000000000009ffff
reserve RAM buffer: 000000006fef0000 - 000000006fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0x000f0000-0x000f3fff]
pnp 00:00: [mem 0x000f4000-0x000f7fff]
pnp 00:00: [mem 0x000f8000-0x000fbfff]
pnp 00:00: [mem 0x000fc000-0x000fffff]
pnp 00:00: [mem 0x6ff00000-0x6fffffff]
pnp 00:00: [mem 0x6fef0000-0x6fefffff]
pnp 00:00: [mem 0xffff0000-0xffffffff]
pnp 00:00: [mem 0x00000000-0x0009ffff]
pnp 00:00: [mem 0x00100000-0x6feeffff]
pnp 00:00: [mem 0xfec00000-0xfec00fff]
pnp 00:00: [mem 0xfee00000-0xfee00fff]
pnp 00:00: [mem 0xfff80000-0xfffeffff]
system 00:00: [mem 0x000f0000-0x000f3fff] could not be reserved
system 00:00: [mem 0x000f4000-0x000f7fff] could not be reserved
system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:00: [mem 0x6ff00000-0x6fffffff] could not be reserved
system 00:00: [mem 0x6fef0000-0x6fefffff] could not be reserved
system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x00100000-0x6feeffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [bus 00-ff]
pnp 00:01: [io 0x0cf8-0x0cff]
pnp 00:01: [io 0x0000-0x0cf7 window]
pnp 00:01: [io 0x0d00-0xffff window]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0x000c0000-0x000dffff window]
pnp 00:01: [mem 0x70000000-0xfebfffff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:02: [io 0x4000-0x407f]
pnp 00:02: [io 0x5000-0x500f]
system 00:02: [io 0x4000-0x407f] has been reserved
system 00:02: [io 0x5000-0x500f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [io 0x0010-0x001f]
pnp 00:03: [io 0x0022-0x003f]
pnp 00:03: [io 0x0044-0x005f]
pnp 00:03: [io 0x0062-0x0063]
pnp 00:03: [io 0x0065-0x006f]
pnp 00:03: [io 0x0074-0x007f]
pnp 00:03: [io 0x0091-0x0093]
pnp 00:03: [io 0x00a2-0x00bf]
pnp 00:03: [io 0x00e0-0x00ef]
pnp 00:03: [io 0x0b78-0x0b7b]
pnp 00:03: [io 0x0f78-0x0f7b]
pnp 00:03: [io 0x0a78-0x0a7b]
pnp 00:03: [io 0x0e78-0x0e7b]
pnp 00:03: [io 0x0bbc-0x0bbf]
pnp 00:03: [io 0x0fbc-0x0fbf]
pnp 00:03: [io 0x04d0-0x04d1]
pnp 00:03: [io 0x0290-0x0297]
system 00:03: [io 0x0b78-0x0b7b] has been reserved
system 00:03: [io 0x0f78-0x0f7b] has been reserved
system 00:03: [io 0x0a78-0x0a7b] has been reserved
system 00:03: [io 0x0e78-0x0e7b] has been reserved
system 00:03: [io 0x0bbc-0x0bbf] has been reserved
system 00:03: [io 0x0fbc-0x0fbf] has been reserved
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x0290-0x0297] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 4]
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0080-0x0090]
pnp 00:04: [io 0x0094-0x009f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io 0x0070-0x0073]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [io 0x03f0-0x03f5]
pnp 00:08: [io 0x03f7]
pnp 00:08: [irq 6]
pnp 00:08: [dma 2]
pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:09: [io 0x03f8-0x03ff]
pnp 00:09: [irq 4]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: [io 0x0378-0x037f]
pnp 00:0a: [io 0x0778-0x077b]
pnp 00:0a: [irq 7]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
Switching to clocksource acpi_pm
pci 0000:00:0e.0: BAR 6: assigned [mem 0x70000000-0x7001ffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xd0000000-0xd001ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd00fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:01.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 6 [mem 0x70000000-0xffffffff]
pci_bus 0000:00: resource 7 [mem 0x190000000-0xfcffffffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd00fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff pref]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
pci 0000:01:00.0: Boot video device
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 17280k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff88006bee8000 - ffff88006fee8000
software IO TLB at phys 0x6bee8000 - 0x6fee8000
Simple Boot Flag at 0x37 set to 0x80
audit: initializing netlink socket (disabled)
type=2000 audit(1340767996.542:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7899
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
NET: Registered protocol family 38
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vesafb: mode is 1400x1050x32, linelength=5632, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90001080000, using 5824k, total 5824k
Console: switching to colour frame buffer device 175x65
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-amd64 0000:00:00.0: AGP bridge [1106/0282]
agpgart-amd64 0000:00:00.0: AGP aperture is 1024M @ 0x80000000
loop: module loaded
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: irq 21, io mem 0xd0121000
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.4.3-1.fc17.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:10.4
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e400
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.4.3-1.fc17.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:10.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e500
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.4.3-1.fc17.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:10.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e600
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.4.3-1.fc17.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:10.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e700
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.4.3-1.fc17.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:10.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
USB Serial support registered for generic
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 0:374:564
rtc_cmos 00:05: setting system clock to 2012-06-27 03:33:17 UTC (1340767997)
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ (2 cpu cores) (version 2.20.00)
[Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: Try again with latest BIOS.
Initializing network drop monitor service
Freeing unused kernel memory: 1000k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 2044k freed
Freeing unused kernel memory: 1488k freed
dracut: dracut-018-40.git20120522.fc17
dracut: rd.luks=0: removing cryptoluks activation
dracut: rd.lvm=0: removing LVM activation
udevd[102]: starting version 182
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
checking generic (c0000000 5b0000) vs hw (c0000000 10000000)
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (RV670 0x1002:0x9505 0x1002:0x9505).
[drm] register mmio base: 0xD0020000
[drm] register mmio size: 65536
ATOM BIOS: 113
agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
radeon 0000:01:00.0: putting AGP V3 device into 8x mode
radeon 0000:01:00.0: GTT: 1024M 0x80000000 - 0xBFFFFFFF
radeon 0000:01:00.0: VRAM: 512M 0x60000000 - 0x7FFFFFFF (512M used)
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 256bits DDR
[TTM] Zone kernel: Available graphics memory: 2024620 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] radeon: ib pool ready.
[drm] Loading RV670 Microcode
radeon 0000:01:00.0: WB disabled
[drm] fence driver on ring 0 use gpu addr 0x80000000 and cpu addr 0xffffc90001080000
[drm] ring test on 0 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DVI-I
[drm] HPD1
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP1: INTERNAL_KLDSCP_TMDS1
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 1:
[drm] DIN
[drm] Encoders:
[drm] TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm] DVI-I
[drm] HPD2
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] DFP2: INTERNAL_LVTM1
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
composite sync not supported
[drm] fb mappable at 0xC0242000
[drm] vram apper at 0xC0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
usb 1-4: new high-speed USB device number 4 using ehci_hcd
usb 1-4: New USB device found, idVendor=152e, idProduct=2507
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: Super Multi Rewriter
usb 1-4: Manufacturer: HLDS Inc.
usb 1-4: SerialNumber: P01060426154003
Initializing USB Mass Storage driver...
scsi0 : usb-storage 1-4:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 2-1: new low-speed USB device number 2 using uhci_hcd
Console: switching to colour frame buffer device 240x67
usb 2-1: New USB device found, idVendor=046d, idProduct=c31c
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB Keyboard
usb 2-1: Manufacturer: Logitech
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.16.0 20080528 for 0000:01:00.0 on minor 0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input2
generic-usb 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:10.0-1/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/input/input3
generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:10.0-1/input1
dracut: Starting plymouth daemon
composite sync not supported
usb 2-2: new low-speed USB device number 3 using uhci_hcd
dracut: rd.dm=0: removing DM RAID activation
dracut: rd.md=0: removing MD RAID activation
usb 2-2: New USB device found, idVendor=046d, idProduct=c064
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB Optical Mouse
usb 2-2: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input4
generic-usb 0003:046D:C064.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:10.0-2/input0
sata_via 0000:00:0f.0: version 2.6
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
sata_via 0000:00:0f.0: routed to hard irq line 11
scsi1 : sata_via
scsi2 : sata_via
ata1: SATA max UDMA/133 cmd 0xe800 ctl 0xe900 bmdma 0xe200 irq 20
ata2: SATA max UDMA/133 cmd 0xe000 ctl 0xe100 bmdma 0xe208 irq 20
firewire_ohci 0000:00:07.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-E10L LE07 PQ: 0 ANSI: 0
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: ST9500325AS, 0002BSM1, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST9500325AS 0002 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 1:0:0:0: [sda] Attached SCSI disk
firewire_core 0000:00:07.0: created device fw0: GUID 00508d0000d41a39, S400
ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
dracut: _Fedora-17-x86_6: clean, 217066/15859712 files, 21649923/63415040 blocks
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
dracut: Mounted root filesystem /dev/sda4
dracut: Switching root
type=1404 audit(1340768001.677:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 100703 rules.
SELinux: 2048 avtab hash slots, 100703 rules.
SELinux: 9 users, 15 roles, 4148 types, 223 bools, 1 sens, 1024 cats
SELinux: 83 classes, 100703 rules
SELinux: Permission ptrace_child in class process not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev sda4, type ext4), uses xattr
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
type=1403 audit(1340768002.349:3): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 789ms 383us.
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
systemd[1]: Relabelled /dev and /run in 78ms 338us.
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
systemd[1]: systemd 44 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP; fedora)
systemd[1]: Set hostname to .
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
systemd-journald[339]: Fixed max_use=197.7M max_size=24.7M min_size=64.0K keep_free=98.8M
systemd-journald[339]: Vacuuming...
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
EXT4-fs (sda4): re-mounted. Opts: (null)
udevd[341]: starting version 182
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=1 offMin=0x25ac18 offMax=0x25ac18
vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.1.16_RPMFusion (interface 0x00190000).
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 2.1.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
microcode: AMD CPU family 0xf not supported
microcode: AMD CPU family 0xf not supported
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ppdev: user-space parallel port driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
VIA Networking Velocity Family Gigabit Ethernet Adapter Driver Ver. 1.15
Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.
Copyright (c) 2004 Red Hat Inc.
eth0: VIA Networking Velocity Family Gigabit Ethernet Adapter
eth0: Ethernet Address: 00:50:8d:d5:1a:39
udevd[399]: renamed network interface eth0 to p7p1
snd_via82xx 0000:00:11.5: setting latency timer to 64
Adding 8388604k swap on /dev/sda3. Priority:0 extents:1 across:8388604k
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev sda2, type ext4), uses xattr
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Velocity is AUTO mode
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
composite sync not supported
composite sync not supported
p7p1: Link auto-negotiation speed 1000M bps full duplex
p7p1: no IPv6 routers present
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
npviewer.bin[1501] trap int3 ip:31f3a4e851 sp:7fffd4c2f8a0 error:0
npviewer.bin[1700] trap int3 ip:31f3a4e851 sp:7fff2292bf90 error:0
npviewer.bin[1867] trap int3 ip:31f3a4e851 sp:7fffbd692370 error:0
usb 1-3: new high-speed USB device number 5 using ehci_hcd
usb 1-3: New USB device found, idVendor=14cd, idProduct=6116
usb 1-3: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-3: Product: USB 2.0 SATA BRIDGE
usb 1-3: Manufacturer: Super Top
usb 1-3: SerialNumber: M6116A016V20
scsi3 : usb-storage 1-3:1.0
usbcore: registered new interface driver ums-cypress
scsi 3:0:0:0: Direct-Access ST932032 5AS PQ: 0 ANSI: 0
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdb] 625142447 512-byte logical blocks: (320 GB/298 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2 sdb3 sdb4
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] Attached SCSI disk
fuse init (API version 7.18)
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
SELinux: initialized (dev sdb1, type fuseblk), uses genfs_contexts
SELinux: initialized (dev sdb2, type fuseblk), uses genfs_contexts
SELinux: initialized (dev sdb4, type vfat), uses genfs_contexts
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
npviewer.bin[2328] trap int3 ip:31f3a4e851 sp:7fff0126d090 error:0
npviewer.bin[2410] trap int3 ip:31f3a4e851 sp:7fff90a34ca0 error:0
npviewer.bin[2439] trap int3 ip:31f3a4e851 sp:7fff960ffae0 error:0
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported
composite sync not supported