dmesg - 02
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-5-686 (Debian 2.6.32-45) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun May 6 04:01:19 UTC 2012
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000be6b0000 (usable)
BIOS-e820: 00000000be6b0000 - 00000000be6cc000 (ACPI data)
BIOS-e820: 00000000be6cc000 - 00000000be700000 (ACPI NVS)
BIOS-e820: 00000000be700000 - 00000000bf000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0xbe6b0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0BF000000 mask FFF000000 uncachable
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0BE700000 mask FFFF00000 uncachable
4 base 0BE800000 mask FFF800000 uncachable
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000373fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037000000 page 2M
0037000000 - 00373fe000 page 4k
kernel direct mapping tables up to 373fe000 @ 7000-d000
RAMDISK: 37646000 - 37fef007
Allocated new RAMDISK: 00100000 - 00aa9007
Move RAMDISK from 0000000037646000 - 0000000037fef006 to 00100000 - 00aa9006
ACPI: RSDP 000f68d0 00024 (v02 LENOVO)
ACPI: XSDT be6bb77f 0009C (v01 LENOVO TP-7L 00002210 LTP 00000000)
ACPI: FACP be6bb900 000F4 (v03 LENOVO TP-7L 00002210 LNVO 00000001)
ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20090903/tbfadt-526)
ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 (20090903/tbfadt-557)
ACPI: DSDT be6bbd1d 0FED1 (v01 LENOVO TP-7L 00002210 MSFT 03000000)
ACPI: FACS be6e4000 00040
ACPI: SSDT be6bbab4 00269 (v01 LENOVO TP-7L 00002210 MSFT 03000000)
ACPI: ECDT be6cbbee 00052 (v01 LENOVO TP-7L 00002210 LNVO 00000001)
ACPI: TCPA be6cbc40 00032 (v02 LENOVO TP-7L 00002210 LNVO 00000001)
ACPI: APIC be6cbc72 00068 (v01 LENOVO TP-7L 00002210 LNVO 00000001)
ACPI: MCFG be6cbcda 0003C (v01 LENOVO TP-7L 00002210 LNVO 00000001)
ACPI: HPET be6cbd16 00038 (v01 LENOVO TP-7L 00002210 LNVO 00000001)
ACPI: SLIC be6cbdf0 00176 (v01 LENOVO TP-7L 00002210 LTP 00000000)
ACPI: BOOT be6cbf66 00028 (v01 LENOVO TP-7L 00002210 LTP 00000001)
ACPI: ASF! be6cbf8e 00072 (v16 LENOVO TP-7L 00002210 PTL 00000001)
ACPI: SSDT be6e271b 0025F (v01 LENOVO TP-7L 00002210 INTL 20050513)
ACPI: SSDT be6e297a 000A6 (v01 LENOVO TP-7L 00002210 INTL 20050513)
ACPI: SSDT be6e2a20 004F7 (v01 LENOVO TP-7L 00002210 INTL 20050513)
ACPI: SSDT be6e2f17 008BD (v01 LENOVO TP-7L 00002210 INTL 20050513)
ACPI: SSDT be6e37d4 0069C (v01 LENOVO TP-7L 00002210 INTL 20050513)
ACPI: DMI detected: Lenovo ThinkPad T61
ACPI: Added _OSI(Linux)
ACPI: Local APIC address 0xfee00000
2162MB HIGHMEM available.
883MB LOWMEM available.
mapped low ram: 0 - 373fe000
low ram: 0 - 373fe000
node 0 low ram: 00000000 - 373fe000
node 0 bootmap 00009000 - 0000fe80
(9 early reservations) ==> bootmem [0000000000 - 00373fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0001000000 - 00014ccd2c] TEXT DATA BSS ==> [0001000000 - 00014ccd2c]
#4 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000]
#5 [00014cd000 - 00014d3128] BRK ==> [00014cd000 - 00014d3128]
#6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
#7 [0000100000 - 0000aa9007] NEW RAMDISK ==> [0000100000 - 0000aa9007]
#8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
found SMP MP-table at [c00f6900] f6900
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000373fe
HighMem 0x000373fe -> 0x000be6b0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009d
0: 0x00000100 -> 0x000be6b0
On node 0 totalpages: 779853
free_area_init_node: node 0, pgdat c13b48c0, node_mem_map c14d5000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3965 pages, LIFO batch:0
Normal zone: 1736 pages used for memmap
Normal zone: 220470 pages, LIFO batch:31
HighMem zone: 4326 pages used for memmap
HighMem zone: 549324 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at bf000000 (gap: bf000000:31000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c3000000 s34328 r0 d23016 u2097152
pcpu-alloc: s34328 r0 d23016 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 773759
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000373fe:000be6b0)
Memory: 3078192k/3119808k available (2506k kernel code, 40232k reserved, 1326k data, 380k init, 2214600k highmem)
virtual kernel memory layout:
fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
.init : 0xc13bf000 - 0xc141e000 ( 380 kB)
.data : 0xc1272b8b - 0xc13be4c4 (1326 kB)
.text : 0xc1000000 - 0xc1272b8b (2506 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2394.029 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.05 BogoMIPS (lpj=9576116)
Security Framework initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090903
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz stepping 0b
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#1]:
Measured 1240824 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
Brought up 2 CPUs
Total of 2 processors activated (9576.01 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: group c3003778 cpus 0 group c3203778 cpus 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: group c3203778 cpus 1 group c3003778 cpus 0
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: MCFG area at f0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: BIOS _OSI(Linux) query honored via DMI
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
ACPI: Power Resource [PUBS] (on)
ACPI: ACPI Dock Station Driver: 4 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0xf8100000-0xf81fffff]
pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff]
pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
pci 0000:00:02.1: reg 10 64bit mmio: [0xf8200000-0xf82fffff]
pci 0000:00:19.0: reg 10 32bit mmio: [0xfe000000-0xfe01ffff]
pci 0000:00:19.0: reg 14 32bit mmio: [0xfe025000-0xfe025fff]
pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe226400-0xfe2267ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe020000-0xfe023fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x18a0-0x18bf]
pci 0000:00:1d.1: reg 20 io port: [0x18c0-0x18df]
pci 0000:00:1d.2: reg 20 io port: [0x18e0-0x18ff]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe226800-0xfe226bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.2: reg 20 io port: [0x1c30-0x1c3f]
pci 0000:00:1f.2: reg 24 io port: [0x1c20-0x1c2f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe226c00-0xfe226cff]
pci 0000:00:1f.3: reg 20 io port: [0x1c40-0x1c5f]
pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xfc000000-0xfdffffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8000000-0xf80fffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0xdf3fe000-0xdf3fffff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xdc000000-0xdf3fffff]
pci 0000:00:1c.1: bridge 64bit mmio pref: [0xdfe00000-0xdfefffff]
pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff]
pci 0000:00:1c.2: bridge 32bit mmio: [0xd8000000-0xd9ffffff]
pci 0000:00:1c.2: bridge 64bit mmio pref: [0xdfb00000-0xdfbfffff]
pci 0000:00:1c.3: bridge io port: [0x5000-0x5fff]
pci 0000:00:1c.3: bridge 32bit mmio: [0xd4000000-0xd5ffffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0xdf800000-0xdf8fffff]
pci 0000:00:1c.4: bridge io port: [0x6000-0x6fff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xd0000000-0xd1ffffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xdf500000-0xdf5fffff]
pci 0000:15:00.0: reg 10 32bit mmio: [0xf8300000-0xf8300fff]
pci 0000:15:00.0: supports D1 D2
pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.0: PME# disabled
pci 0000:15:00.1: reg 10 32bit mmio: [0xf8301000-0xf83017ff]
pci 0000:15:00.1: supports D1 D2
pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.1: PME# disabled
pci 0000:15:00.2: reg 10 32bit mmio: [0xf8301800-0xf83018ff]
pci 0000:15:00.2: supports D1 D2
pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.2: PME# disabled
pci 0000:15:00.3: reg 10 32bit mmio: [0xf8301c00-0xf8301cff]
pci 0000:15:00.3: supports D1 D2
pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.3: PME# disabled
pci 0000:15:00.4: reg 10 32bit mmio: [0xf8302000-0xf83020ff]
pci 0000:15:00.4: supports D1 D2
pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.4: PME# disabled
pci 0000:15:00.5: reg 10 32bit mmio: [0xf8302400-0xf83024ff]
pci 0000:15:00.5: supports D1 D2
pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.5: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0x7000-0xafff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xf8300000-0xfbffffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf4000000-0xf7ffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
system 00:00: iomem range 0xc8000-0xcbfff has been reserved
system 00:00: iomem range 0xcc000-0xcffff has been reserved
system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
system 00:00: iomem range 0xe8000-0xebfff could not be reserved
system 00:00: iomem range 0xec000-0xeffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0xbeffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
system 00:02: ioport range 0x164e-0x164f has been reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11bf has been reserved
system 00:02: ioport range 0x800-0x80f has been reserved
system 00:02: ioport range 0x15e0-0x15ef has been reserved
system 00:02: ioport range 0x1600-0x165f could not be reserved
system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved
system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: 0x2000-0x2fff
pci 0000:00:1c.0: MEM window: 0xfc000000-0xfdffffff
pci 0000:00:1c.0: PREFETCH window: 0x000000f8000000-0x000000f80fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1: IO window: 0x3000-0x3fff
pci 0000:00:1c.1: MEM window: 0xdc000000-0xdf3fffff
pci 0000:00:1c.1: PREFETCH window: 0x000000dfe00000-0x000000dfefffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.2: IO window: 0x4000-0x4fff
pci 0000:00:1c.2: MEM window: 0xd8000000-0xd9ffffff
pci 0000:00:1c.2: PREFETCH window: 0x000000dfb00000-0x000000dfbfffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.3: IO window: 0x5000-0x5fff
pci 0000:00:1c.3: MEM window: 0xd4000000-0xd5ffffff
pci 0000:00:1c.3: PREFETCH window: 0x000000df800000-0x000000df8fffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d
pci 0000:00:1c.4: IO window: 0x6000-0x6fff
pci 0000:00:1c.4: MEM window: 0xd0000000-0xd1ffffff
pci 0000:00:1c.4: PREFETCH window: 0x000000df500000-0x000000df5fffff
pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
pci 0000:15:00.0: IO window: 0x007000-0x0070ff
pci 0000:15:00.0: IO window: 0x007400-0x0074ff
pci 0000:15:00.0: PREFETCH window: 0xf4000000-0xf7ffffff
pci 0000:15:00.0: MEM window: 0xc0000000-0xc3ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
pci 0000:00:1e.0: IO window: 0x7000-0xafff
pci 0000:00:1e.0: MEM window: 0xf8300000-0xfbffffff
pci 0000:00:1e.0: PREFETCH window: 0x000000f4000000-0x000000f7ffffff
pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: enabling device (0005 -> 0007)
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:02: resource 1 mem: [0xfc000000-0xfdffffff]
pci_bus 0000:02: resource 2 pref mem [0xf8000000-0xf80fffff]
pci_bus 0000:03: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:03: resource 1 mem: [0xdc000000-0xdf3fffff]
pci_bus 0000:03: resource 2 pref mem [0xdfe00000-0xdfefffff]
pci_bus 0000:04: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:04: resource 1 mem: [0xd8000000-0xd9ffffff]
pci_bus 0000:04: resource 2 pref mem [0xdfb00000-0xdfbfffff]
pci_bus 0000:05: resource 0 io: [0x5000-0x5fff]
pci_bus 0000:05: resource 1 mem: [0xd4000000-0xd5ffffff]
pci_bus 0000:05: resource 2 pref mem [0xdf800000-0xdf8fffff]
pci_bus 0000:0d: resource 0 io: [0x6000-0x6fff]
pci_bus 0000:0d: resource 1 mem: [0xd0000000-0xd1ffffff]
pci_bus 0000:0d: resource 2 pref mem [0xdf500000-0xdf5fffff]
pci_bus 0000:15: resource 0 io: [0x7000-0xafff]
pci_bus 0000:15: resource 1 mem: [0xf8300000-0xfbffffff]
pci_bus 0000:15: resource 2 pref mem [0xf4000000-0xf7ffffff]
pci_bus 0000:15: resource 3 io: [0x00-0xffff]
pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:16: resource 0 io: [0x7000-0x70ff]
pci_bus 0000:16: resource 1 io: [0x7400-0x74ff]
pci_bus 0000:16: resource 2 pref mem [0xf4000000-0xf7ffffff]
pci_bus 0000:16: resource 3 mem: [0xc0000000-0xc3ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
pci 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1a.1: power state changed by ACPI to D0
pci 0000:00:1a.1: power state changed by ACPI to D0
pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1a.1: PCI INT B disabled
pci 0000:00:1a.7: power state changed by ACPI to D0
pci 0000:00:1a.7: power state changed by ACPI to D0
pci 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1a.7: PCI INT C disabled
pci 0000:00:1d.0: power state changed by ACPI to D0
pci 0000:00:1d.0: power state changed by ACPI to D0
pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1d.1: PCI INT B disabled
pci 0000:00:1d.2: power state changed by ACPI to D0
pci 0000:00:1d.2: power state changed by ACPI to D0
pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.7: power state changed by ACPI to D0
pci 0000:00:1d.7: power state changed by ACPI to D0
pci 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1d.7: PCI INT D disabled
Unpacking initramfs...
Freeing initrd memory: 9892k freed
Simple Boot Flag at 0x35 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1338032632.496:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1707
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected 7676K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
No iBFT detected.
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:07: setting system clock to 2012-05-26 11:43:53 UTC (1338032633)
Initalizing network drop monitor service
Freeing unused kernel memory: 380k freed
Write protecting the kernel text: 2508k
Write protecting the kernel read-only data: 920k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
udev[57]: starting version 164
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale
ricoh-mmc: Ricoh MMC controller found at 0000:15:00.3 [1180:0843] (rev 11)
ricoh-mmc: Controller is now disabled.
SCSI subsystem initialized
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (45 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [THM1] (48 C)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
libata version 3.00 loaded.
firewire_ohci 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
firewire_ohci: Added fw-ohci device 0000:15:00.1, OHCI version 1.10
sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: setting latency timer to 64
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:21:86:96:12:6e
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: 1008FF-0FF
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c30 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1c38 irq 15
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe226800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
firewire_core: created device fw0: GUID 00061b032a2faeac, S400
ata2.00: ATAPI: DVD/CDRW UJDA775, CB03, max UDMA/33
ata2.00: configured for UDMA/33
ata1.00: ATA-8: ST9500420AS, 0002SDM1, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST9500420AS 0002 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM MATSHITA DVD/CDRW UJDA775 CB03 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sda1 sda2 sda3 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
usb 3-2: new full speed USB device using uhci_hcd and address 2
usb 3-2: New USB device found, idVendor=0483, idProduct=2016
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Biometric Coprocessor
usb 3-2: Manufacturer: STMicroelectronics
usb 3-2: configuration #1 chosen from 1 choice
PM: Starting manual resume from disk
PM: Resume from partition 8:6
PM: Checking hibernation image.
PM: Error -22 checking image file
PM: Resume from disk failed.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
usb 5-1: new low speed USB device using uhci_hcd and address 2
usb 5-1: New USB device found, idVendor=046d, idProduct=c050
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB-PS/2 Optical Mouse
usb 5-1: Manufacturer: Logitech
usb 5-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input1
generic-usb 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
kjournald starting. Commit interval 5 seconds
EXT3-fs: sda5: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 3105295
ext3_orphan_cleanup: deleting unreferenced inode 3105293
ext3_orphan_cleanup: deleting unreferenced inode 3105288
ext3_orphan_cleanup: deleting unreferenced inode 3105287
ext3_orphan_cleanup: deleting unreferenced inode 3105286
ext3_orphan_cleanup: deleting unreferenced inode 3105285
ext3_orphan_cleanup: deleting unreferenced inode 3105284
ext3_orphan_cleanup: deleting unreferenced inode 3105283
ext3_orphan_cleanup: deleting unreferenced inode 3105282
ext3_orphan_cleanup: deleting unreferenced inode 3105281
ext3_orphan_cleanup: deleting unreferenced inode 3105280
ext3_orphan_cleanup: deleting unreferenced inode 3105279
ext3_orphan_cleanup: deleting unreferenced inode 3105278
ext3_orphan_cleanup: deleting unreferenced inode 3105277
ext3_orphan_cleanup: deleting unreferenced inode 3105276
ext3_orphan_cleanup: deleting unreferenced inode 3105275
ext3_orphan_cleanup: deleting unreferenced inode 3105274
ext3_orphan_cleanup: deleting unreferenced inode 3105273
ext3_orphan_cleanup: deleting unreferenced inode 3105272
ext3_orphan_cleanup: deleting unreferenced inode 3105271
ext3_orphan_cleanup: deleting unreferenced inode 3105270
ext3_orphan_cleanup: deleting unreferenced inode 3105257
ext3_orphan_cleanup: deleting unreferenced inode 3105256
ext3_orphan_cleanup: deleting unreferenced inode 3105255
ext3_orphan_cleanup: deleting unreferenced inode 3105254
ext3_orphan_cleanup: deleting unreferenced inode 3105253
ext3_orphan_cleanup: deleting unreferenced inode 3105252
ext3_orphan_cleanup: deleting unreferenced inode 3105251
ext3_orphan_cleanup: deleting unreferenced inode 3105250
ext3_orphan_cleanup: deleting unreferenced inode 3105249
ext3_orphan_cleanup: deleting unreferenced inode 3105248
ext3_orphan_cleanup: deleting unreferenced inode 3105247
ext3_orphan_cleanup: deleting unreferenced inode 3105246
ext3_orphan_cleanup: deleting unreferenced inode 3105245
ext3_orphan_cleanup: deleting unreferenced inode 3105244
ext3_orphan_cleanup: deleting unreferenced inode 3105243
ext3_orphan_cleanup: deleting unreferenced inode 3105242
ext3_orphan_cleanup: deleting unreferenced inode 3105241
ext3_orphan_cleanup: deleting unreferenced inode 3105240
ext3_orphan_cleanup: deleting unreferenced inode 3105239
ext3_orphan_cleanup: deleting unreferenced inode 3105238
ext3_orphan_cleanup: deleting unreferenced inode 3105231
ext3_orphan_cleanup: deleting unreferenced inode 3105227
ext3_orphan_cleanup: deleting unreferenced inode 3105224
ext3_orphan_cleanup: deleting unreferenced inode 3105213
ext3_orphan_cleanup: deleting unreferenced inode 3105212
ext3_orphan_cleanup: deleting unreferenced inode 3105204
ext3_orphan_cleanup: deleting unreferenced inode 3105203
ext3_orphan_cleanup: deleting unreferenced inode 3105202
ext3_orphan_cleanup: deleting unreferenced inode 3105201
ext3_orphan_cleanup: deleting unreferenced inode 3105200
ext3_orphan_cleanup: deleting unreferenced inode 3105199
ext3_orphan_cleanup: deleting unreferenced inode 3105198
ext3_orphan_cleanup: deleting unreferenced inode 3105197
ext3_orphan_cleanup: deleting unreferenced inode 3105196
ext3_orphan_cleanup: deleting unreferenced inode 3105194
ext3_orphan_cleanup: deleting unreferenced inode 3105192
ext3_orphan_cleanup: deleting unreferenced inode 3105190
ext3_orphan_cleanup: deleting unreferenced inode 3105188
ext3_orphan_cleanup: deleting unreferenced inode 3105184
ext3_orphan_cleanup: deleting unreferenced inode 3105175
ext3_orphan_cleanup: deleting unreferenced inode 3105174
ext3_orphan_cleanup: deleting unreferenced inode 3105173
ext3_orphan_cleanup: deleting unreferenced inode 3105172
ext3_orphan_cleanup: deleting unreferenced inode 3105171
ext3_orphan_cleanup: deleting unreferenced inode 3105170
ext3_orphan_cleanup: deleting unreferenced inode 3104792
ext3_orphan_cleanup: deleting unreferenced inode 3104790
ext3_orphan_cleanup: deleting unreferenced inode 3104788
ext3_orphan_cleanup: deleting unreferenced inode 3104774
ext3_orphan_cleanup: deleting unreferenced inode 516372
ext3_orphan_cleanup: deleting unreferenced inode 516361
ext3_orphan_cleanup: deleting unreferenced inode 516359
ext3_orphan_cleanup: deleting unreferenced inode 516351
ext3_orphan_cleanup: deleting unreferenced inode 516349
ext3_orphan_cleanup: deleting unreferenced inode 516210
ext3_orphan_cleanup: deleting unreferenced inode 3052727
ext3_orphan_cleanup: deleting unreferenced inode 3048061
ext3_orphan_cleanup: deleting unreferenced inode 1384494
ext3_orphan_cleanup: deleting unreferenced inode 1384493
ext3_orphan_cleanup: deleting unreferenced inode 1384488
EXT3-fs: sda5: 81 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
udev[375]: starting version 164
ACPI: WMI: Mapper loaded
ACPI: AC Adapter [AC] (on-line)
input: PC Speaker as /devices/platform/pcspkr/input/input2
ACPI: Battery Slot [BAT0] (battery present)
ACPI: SSDT be6e1b32 00306 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
ACPI: SSDT be6e1ebd 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
processor LNXCPU:00: registered as cooling_device0
ACPI: SSDT be6e1a6a 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
ACPI: SSDT be6e1e38 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
processor LNXCPU:01: registered as cooling_device1
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
Non-volatile memory driver v1.3
thinkpad_acpi: ThinkPad ACPI Extras v0.23
thinkpad_acpi:
thinkpad_acpi: ThinkPad BIOS 7LETC1WW (2.21 ), EC 7KHT24WW-1.08
thinkpad_acpi: Lenovo ThinkPad T61, model 7659D44
thinkpad_acpi: ACPI backlight control delay disabled
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
Registered led device: tpacpi::standby
Registered led device: tpacpi::thinkvantage
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
hda_intel: probe_mask set to 0x1 for device 17aa:20ac
HDA Intel 0000:00:1b.0: setting latency timer to 64
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
yenta_cardbus 0000:15:00.0: Socket status: 30000006
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x7000 - 0xafff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x7000-0xafff: clean.
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04791/0x300000/0x0
serio: Synaptics pass-through port at isa0060/serio1/input0
iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
iwlagn 0000:03:00.0: irq 30 for MSI/MSI-X
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[drm] Initialized drm 1.1.0 20060810
phy0: Selected rate control algorithm 'iwl-agn-rs'
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
usb 3-1: new full speed USB device using uhci_hcd and address 3
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
i915 0000:00:02.0: power state changed by ACPI to D0
i915 0000:00:02.0: power state changed by ACPI to D0
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 31 for MSI/MSI-X
[drm] set up 7M of stolen space
usb 3-1: New USB device found, idVendor=0a5c, idProduct=2110
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: BCM2045B
usb 3-1: Manufacturer: Broadcom Corp
usb 3-1: configuration #1 chosen from 1 choice
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
[drm] initialized overlay support
Console: switching to colour frame buffer device 180x56
fb0: inteldrmfb frame buffer device
registered panic notifier
acpi device:01: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Adding 6835192k swap on /dev/sda6. Priority:-1 extents:1 across:6835192k
EXT3 FS on sda5, internal journal
loop: module loaded
fuse init (API version 7.13)
input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10
e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode
IBM TrackPoint firmware: 0x0e, buttons: 3/3
iwlagn 0000:03:00.0: loaded firmware version 228.61.2.24
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input11
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
apm: BIOS not found.
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
wlan0: direct probe to AP a0:21:b7:d0:23:89 (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP a0:21:b7:d0:23:89 (try 1)
wlan0: authenticated
wlan0: associate with AP a0:21:b7:d0:23:89 (try 1)
wlan0: RX AssocResp from a0:21:b7:d0:23:89 (capab=0x411 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
padlock: VIA PadLock not detected.
wlan0: no IPv6 routers present
iwlagn 0000:03:00.0: iwl_tx_agg_start on ra = a0:21:b7:d0:23:89 tid = 0
wlan0: deauthenticating from a0:21:b7:d0:23:89 by local choice (reason=3)
usb 3-1: USB disconnect, address 3
btusb_intr_complete: hci0 urb f2948d80 failed to resubmit (19)
btusb_bulk_complete: hci0 urb f2948e80 failed to resubmit (19)
btusb_bulk_complete: hci0 urb f2948e00 failed to resubmit (19)
btusb_send_frame: hci0 urb f0e7ff80 submission failed
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
ACPI handle has no context!
sdhci-pci 0000:15:00.2: PCI INT C disabled
ACPI handle has no context!
ACPI handle has no context!
ata_piix 0000:00:1f.2: PCI INT B disabled
ehci_hcd 0000:00:1d.7: PCI INT D disabled
uhci_hcd 0000:00:1d.2: PCI INT C disabled
uhci_hcd 0000:00:1d.1: PCI INT B disabled
uhci_hcd 0000:00:1d.0: PCI INT A disabled
HDA Intel 0000:00:1b.0: PCI INT B disabled
ehci_hcd 0000:00:1a.7: PCI INT C disabled
uhci_hcd 0000:00:1a.1: PCI INT B disabled
uhci_hcd 0000:00:1a.0: PCI INT A disabled
e1000e 0000:00:19.0: PCI INT A disabled
e1000e 0000:00:19.0: PME# enabled
e1000e 0000:00:19.0: wake-up capability enabled by ACPI
i915 0000:00:02.0: power state changed by ACPI to D3
ricoh-mmc: Suspending.
ricoh-mmc: Controller is now re-enabled.
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
uhci_hcd 0000:00:1d.2: power state changed by ACPI to D3
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
uhci_hcd 0000:00:1a.1: power state changed by ACPI to D3
ACPI: Preparing to enter system sleep state S3
Disabling non-boot CPUs ...
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching NULL sched-domain.
CPU 1 is now offline
SMP alternatives: switching to UP code
Extended CMOS year: 2000
Back to C!
CPU0: Thermal monitoring enabled (TM2)
Extended CMOS year: 2000
Enabling non-boot CPUs ...
SMP alternatives: switching to SMP code
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz stepping 0b
CPU0 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: group c3003778 cpus 0 group c3203778 cpus 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: group c3203778 cpus 1 group c3003778 cpus 0
CPU1 is up
ACPI: Waking up from system sleep state S3
Monitor-Mwait will be used to enter C-3 state
i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20002020, writing 0x2020)
pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20004040, writing 0x4040)
pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20005050, writing 0x5050)
pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20006060, writing 0x6060)
pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007)
ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00005, writing 0x2b80005)
iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x40100106)
firewire_ohci 0000:15:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802000)
firewire_ohci 0000:15:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
sdhci-pci 0000:15:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
sdhci-pci 0000:15:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
ricoh-mmc: Resuming.
ricoh-mmc: Controller is now disabled.
i915 0000:00:02.0: power state changed by ACPI to D0
i915 0000:00:02.0: power state changed by ACPI to D0
i915 0000:00:02.0: setting latency timer to 64
e1000e 0000:00:19.0: wake-up capability disabled by ACPI
e1000e 0000:00:19.0: PME# disabled
e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
usb usb3: root hub lost power or was reset
uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
usb usb4: root hub lost power or was reset
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
usb usb5: root hub lost power or was reset
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
usb usb6: root hub lost power or was reset
uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
usb usb7: root hub lost power or was reset
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1d.7: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
ata_piix 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.2: setting latency timer to 64
ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: configured for UDMA/33
sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
firewire_core: skipped bus generations, destroying all nodes
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
firewire_core: rediscovered device fw0
sd 0:0:0:0: [sda] Starting disk
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
usb 3-2: reset full speed USB device using uhci_hcd and address 2
usb 5-1: reset low speed USB device using uhci_hcd and address 2
thinkpad_acpi: ACPI backlight control delay disabled
PM: Finishing wakeup.
Restarting tasks ... done.
e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
CE: hpet increasing min_delta_ns to 40226 nsec
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
usb 3-1: new full speed USB device using uhci_hcd and address 4
usb 3-1: New USB device found, idVendor=0a5c, idProduct=2110
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: BCM2045B
usb 3-1: Manufacturer: Broadcom Corp
usb 3-1: configuration #1 chosen from 1 choice
wlan0: direct probe to AP a0:21:b7:d0:23:89 (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP a0:21:b7:d0:23:89 (try 1)
wlan0: authenticated
wlan0: associate with AP a0:21:b7:d0:23:89 (try 1)
wlan0: RX AssocResp from a0:21:b7:d0:23:89 (capab=0x411 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
iwlagn 0000:03:00.0: iwl_tx_agg_start on ra = a0:21:b7:d0:23:89 tid = 0
wlan0: no IPv6 routers present
btnx[5665]: segfault at 0 ip b76bf020 sp bff3b5f0 error 4 in libc-2.11.3.so[b764c000+140000]
input: btnx keyboard as /devices/virtual/input/input12
input: btnx mouse as /devices/virtual/input/input13
input: btnx keyboard as /devices/virtual/input/input14
input: btnx mouse as /devices/virtual/input/input15
CE: hpet increasing min_delta_ns to 60338 nsec