dmesg - complex20120525run
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-24-generic-pae (buildd@vernadsky) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 (Ubuntu 3.2.0-24.39-generic-pae 3.2.16)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fff4000 (usable)
BIOS-e820: 000000007fff4000 - 0000000080000000 (reserved)
BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.3 present.
DMI: Hewlett-Packard hp workstation xw4200/0914h, BIOS 786C3 v01.04 11/03/2004
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x7fff4 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-back
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [c00fe700] fe700
initial memory mapped : 0 - 02000000
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: 0000000000000000-0000000037bfe000
0000000000 - 0000200000 page 4k
0000200000 - 0037a00000 page 2M
0037a00000 - 0037bfe000 page 4k
kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
RAMDISK: 364fc000 - 37276000
ACPI: RSDP 000e9a10 00014 (v00 COMPAQ)
ACPI: RSDT 7fff4040 00038 (v01 COMPAQ CPQ0063 20041103 00000000)
ACPI: FACP 7fff40ec 00074 (v01 COMPAQ ALDERWD 00000001 00000000)
ACPI: DSDT 7fff4267 013F3 (v01 COMPAQ DSDT 00000001 MSFT 0100000E)
ACPI: FACS 7fff4000 00040
ACPI: SSDT 7fff565a 030B1 (v01 COMPAQ PROJECT 00000001 MSFT 0100000E)
ACPI: APIC 7fff4160 00068 (v01 COMPAQ ALDERWD 00000001 00000000)
ACPI: ASF! 7fff41c8 00063 (v32 COMPAQ ALDERWD 00000001 00000000)
ACPI: MCFG 7fff422b 0003C (v01 COMPAQ ALDERWD 00000001 00000000)
ACPI: Local APIC address 0xfee00000
1155MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x00037bfe
HighMem 0x00037bfe -> 0x0007fff4
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007fff4
On node 0 totalpages: 524163
free_area_init_node: node 0, pgdat c186b440, node_mem_map f54fc200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 2312 pages used for memmap
HighMem zone: 293614 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0xf808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:50000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7800000 s34240 r0 d23104 u1048576
pcpu-alloc: s34240 r0 d23104 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520067
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 8388160 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0007fff4)
Memory: 2046936k/2097104k available (5825k kernel code, 49716k reserved, 2849k data, 740k init, 1183704k highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1879000 - 0xc1932000 ( 740 kB)
.data : 0xc15b06fc - 0xc1878cc0 (2849 kB)
.text : 0xc1000000 - 0xc15b06fc (5825 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f7408000 soft=f740a000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 3199.909 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.81 BogoMIPS (lpj=12799636)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20110623
ftrace: allocating 26595 entries in 53 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01
Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
... version: 0
... bit width: 40
... generic registers: 18
... value mask: 000000ffffffffff
... max period: 0000007fffffffff
... fixed-purpose events: 0
... event mask: 000000000003ffff
NMI watchdog enabled, takes one hw-pmu counter.
CPU 1 irqstacks, hard=f74b0000 soft=f74b2000
Booting Node 0, Processors #1 Ok.
smpboot cpu 1: start_ip = 9b000
Initializing CPU#1
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (12800.42 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
print_constraints: dummy:
RTC time: 11:51:19, date: 05/25/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
EISA bus registered
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xd0000000-0xdfffffff] (base 0xd0000000)
PCI: MMCONFIG at [mem 0xd0000000-0xdfffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359)
\_SB_.PCI0:_OSC evaluation returned wrong type
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x1000-0x2fff] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x3000-0x6fff] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x7000-0xafff] (ignored)
pci_root PNP0A08:00: host bridge window [io 0xb000-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xcfffffff] (ignored)
pci 0000:00:00.0: [8086:2584] type 0 class 0x000600
pci 0000:00:01.0: [8086:2585] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1c.0: [8086:2660] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.3: [8086:2666] type 1 class 0x000604
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: [8086:2658] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0x1440-0x145f]
pci 0000:00:1d.1: [8086:2659] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0x1460-0x147f]
pci 0000:00:1d.2: [8086:265a] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0x1480-0x149f]
pci 0000:00:1d.3: [8086:265b] type 0 class 0x000c03
pci 0000:00:1d.3: reg 20: [io 0x14a0-0x14bf]
pci 0000:00:1d.7: [8086:265c] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xcfd00000-0xcfd003ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1e.2: [8086:266e] type 0 class 0x000401
pci 0000:00:1e.2: reg 10: [io 0x1000-0x10ff]
pci 0000:00:1e.2: reg 14: [io 0x1400-0x143f]
pci 0000:00:1e.2: reg 18: [mem 0xcfd00800-0xcfd009ff]
pci 0000:00:1e.2: reg 1c: [mem 0xcfd00a00-0xcfd00aff]
pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.2: PME# disabled
pci 0000:00:1f.0: [8086:2640] type 0 class 0x000601
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: [io 0xf800-0xf87f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0xfa00-0xfa3f] claimed by ICH6 GPIO
pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0400-047f
pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0480-048f
pci 0000:00:1f.1: [8086:266f] type 0 class 0x000101
pci 0000:00:1f.1: reg 10: [io 0x1800-0x1807]
pci 0000:00:1f.1: reg 14: [io 0x1820-0x1823]
pci 0000:00:1f.1: reg 18: [io 0x1808-0x180f]
pci 0000:00:1f.1: reg 1c: [io 0x1824-0x1827]
pci 0000:00:1f.1: reg 20: [io 0x14e0-0x14ef]
pci 0000:00:1f.2: [8086:2652] type 0 class 0x000101
pci 0000:00:1f.2: reg 10: [io 0x1810-0x1817]
pci 0000:00:1f.2: reg 14: [io 0x1828-0x182b]
pci 0000:00:1f.2: reg 18: [io 0x1818-0x181f]
pci 0000:00:1f.2: reg 1c: [io 0x182c-0x182f]
pci 0000:00:1f.2: reg 20: [io 0x14f0-0x14ff]
pci 0000:00:1f.2: reg 24: [mem 0xcfd00400-0xcfd007ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:01:00.0: [10de:00fd] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xf1000000-0xf1ffffff]
pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff pref]
pci 0000:01:00.0: reg 18: [mem 0xf2000000-0xf2ffffff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [mem 0xf1000000-0xf31fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf01fffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 20-20]
pci 0000:80:00.0: [14e4:1677] type 0 class 0x000200
pci 0000:80:00.0: reg 10: [mem 0xf0400000-0xf040ffff 64bit]
pci 0000:80:00.0: PME# supported from D3hot D3cold
pci 0000:80:00.0: PME# disabled
pci 0000:80:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.3: PCI bridge to [bus 80-80]
pci 0000:00:1c.3: bridge window [mem 0xf0200000-0xf04fffff]
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359)
\_SB_.PCI0:_OSC evaluation returned wrong type
_OSC request data:1 1f 1f
pci0000:00: Requesting ACPI _OSC control (0x1d)
ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359)
\_SB_.PCI0:_OSC evaluation returned wrong type
_OSC request data:1 0 1d
pci0000:00: ACPI _OSC request failed (AE_TYPE), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 000000007fff4000 - 000000007fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0xe0000000-0xfebfffff window]
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x1000-0x2fff window]
pnp 00:00: [io 0x3000-0x6fff window]
pnp 00:00: [io 0x7000-0xafff window]
pnp 00:00: [io 0xb000-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x80000000-0xcfffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x00f0-0x00ff]
pnp 00:01: [irq 13]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0080-0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [irq 12]
pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:06: [io 0x0060]
pnp 00:06: [io 0x0064]
pnp 00:06: [irq 1]
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: [irq 7]
pnp 00:07: [dma 3]
pnp 00:07: [io 0x0378-0x037f]
pnp 00:07: [io 0x0778-0x077d]
pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:08: [irq 4]
pnp 00:08: [io 0x03f8-0x03ff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:09: [irq 6]
pnp 00:09: [dma 2]
pnp 00:09: [io 0x03f0-0x03f5]
pnp 00:09: [io 0x03f7]
pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:0a: [mem 0xfec00000-0xfec00fff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:0b: [io 0x0010-0x001f]
pnp 00:0b: [io 0x0050-0x0053]
pnp 00:0b: [io 0x0072-0x0077]
pnp 00:0b: [io 0x0090-0x009f]
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [io 0x0400-0x041f]
pnp 00:0c: [io 0x0420-0x043f]
pnp 00:0c: [io 0x0440-0x045f]
pnp 00:0c: [io 0x0460-0x047f]
pnp 00:0c: [io 0x0480-0x048f]
pnp 00:0c: [io 0xf800-0xf81f]
pnp 00:0c: [io 0xf820-0xf83f]
pnp 00:0c: [io 0xf840-0xf85f]
pnp 00:0c: [io 0xf860-0xf87f]
pnp 00:0c: [io 0xfa00-0xfa3f]
pnp 00:0c: [io 0xfc00-0xfc7f]
pnp 00:0c: [io 0xfc80-0xfcff]
pnp 00:0c: [io 0xfe00-0xfe7f]
pnp 00:0c: [io 0xfe80-0xfeff]
pnp 00:0c: disabling [io 0xf800-0xf81f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
pnp 00:0c: disabling [io 0xf820-0xf83f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
pnp 00:0c: disabling [io 0xf840-0xf85f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
pnp 00:0c: disabling [io 0xf860-0xf87f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
system 00:0c: [io 0x0400-0x041f] has been reserved
system 00:0c: [io 0x0420-0x043f] has been reserved
system 00:0c: [io 0x0440-0x045f] has been reserved
system 00:0c: [io 0x0460-0x047f] has been reserved
system 00:0c: [io 0x0480-0x048f] has been reserved
system 00:0c: [io 0xfa00-0xfa3f] has been reserved
system 00:0c: [io 0xfc00-0xfc7f] has been reserved
system 00:0c: [io 0xfc80-0xfcff] has been reserved
system 00:0c: [io 0xfe00-0xfe7f] has been reserved
system 00:0c: [io 0xfe80-0xfeff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [io 0x04d0-0x04d1]
system 00:0d: [io 0x04d0-0x04d1] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [mem 0x00000000-0x0009ffff]
pnp 00:0e: [mem 0x00100000-0x7fffffff]
pnp 00:0e: [mem 0x000e8000-0x000fffff]
pnp 00:0e: [mem 0xfec01000-0xffffffff]
pnp 00:0e: [mem 0xd0000000-0xdfffffff]
pnp 00:0e: [mem 0x000cea00-0x000e7fff]
system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0e: [mem 0x00100000-0x7fffffff] could not be reserved
system 00:0e: [mem 0x000e8000-0x000fffff] could not be reserved
system 00:0e: [mem 0xfec01000-0xffffffff] has been reserved
system 00:0e: [mem 0xd0000000-0xdfffffff] has been reserved
system 00:0e: [mem 0x000cea00-0x000e7fff] has been reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1c.3: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.3: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.0: BAR 14: assigned [mem 0x80200000-0x803fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xf0000000-0xf001ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [mem 0xf1000000-0xf31fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf01fffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 20-20]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff]
pci 0000:00:1c.0: bridge window [mem 0x80400000-0x805fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 80-80]
pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.3: bridge window [mem 0xf0200000-0xf04fffff]
pci 0000:00:1c.3: bridge window [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: resource 1 [mem 0xf1000000-0xf31fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf01fffff pref]
pci_bus 0000:20: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:20: resource 1 [mem 0x80200000-0x803fffff]
pci_bus 0000:20: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
pci_bus 0000:80: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:80: resource 1 [mem 0xf0200000-0xf04fffff]
pci_bus 0000:80: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
pci_bus 0000:05: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.1: PCI INT B disabled
pci 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1d.3: PCI INT D disabled
pci 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1d.7: PCI INT A disabled
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1337946679.368:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 1686
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Table is not found!
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Freeing initrd memory: 13800k freed
isapnp: No Plug & Play device found
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0x1 impl IDE mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xcfd00400 port 0xcfd00500 irq 19
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x14e0 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x14e8 irq 15
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xcfd00000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001440
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001460
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001480
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 22, io base 0x000014a0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
EISA: Detected 0 cards.
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 12:377:884
rtc_cmos 00:03: setting system clock to 2012-05-25 11:51:20 UTC (1337946680)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata5.00: ATAPI: HL-DT-ST CD-ROM GCR-8483B, 1.02, max MWDMA2
ata5.00: configured for MWDMA2
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: SAMSUNG SP0812C, SU100-32, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP0812C SU10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 4:0:0:0: CD-ROM HL-DT-ST CD-ROM GCR-8483B 1.02 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 740k freed
Write protecting the kernel text: 5828k
Write protecting the kernel read-only data: 2376k
NX-protecting the kernel data: 4412k
udevd[96]: starting version 175
tg3.c:v3.121 (November 2, 2011)
tg3 0000:80:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
tg3 0000:80:00.0: setting latency timer to 64
Refined TSC clocksource calibration: 3200.113 MHz.
Switching to clocksource tsc
Floppy drive(s): fd0 is 1.44M
tg3 0000:80:00.0: eth0: Tigon3 [partno(BCM95751) rev 4001] (PCI Express) MAC address 00:11:85:bb:85:34
tg3 0000:80:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:80:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:80:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
FDC 0 is a post-1991 82077
usb 4-1: new low-speed USB device number 2 using uhci_hcd
input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input2
generic-usb 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.2-1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 4-2: new low-speed USB device number 3 using uhci_hcd
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input3
generic-usb 0003:046D:C016.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.2-2/input0
ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[298]: starting version 175
Adding 2096124k swap on /dev/sda5. Priority:-1 extents:1 across:2096124k
lp: driver loaded but no devices found
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
wmi: Mapper loaded
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
type=1400 audit(1337946688.769:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=570 comm="apparmor_parser"
type=1400 audit(1337946688.769:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=553 comm="apparmor_parser"
type=1400 audit(1337946688.769:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=570 comm="apparmor_parser"
type=1400 audit(1337946688.769:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=553 comm="apparmor_parser"
type=1400 audit(1337946688.773:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=570 comm="apparmor_parser"
type=1400 audit(1337946688.773:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=553 comm="apparmor_parser"
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
NVRM: The NVIDIA Quadro FX 330 GPU installed in this system is
NVRM: supported through the NVIDIA 173.14.xx Legacy drivers. Please
NVRM: visit for more
NVRM: information. The 295.40 NVIDIA driver will ignore
NVRM: this GPU. Continuing probe...
NVRM: No NVIDIA graphics adapter found!
snd_intel8x0 0000:00:1e.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21
snd_intel8x0 0000:00:1e.2: setting latency timer to 64
intel8x0_measure_ac97_clock: measured 54870 usecs (2644 samples)
intel8x0: clocking to 48000
init: failsafe main process (638) killed by TERM signal
type=1400 audit(1337946693.481:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=751 comm="apparmor_parser"
type=1400 audit(1337946693.485:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=751 comm="apparmor_parser"
type=1400 audit(1337946693.485:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=751 comm="apparmor_parser"
type=1400 audit(1337946693.545:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=750 comm="apparmor_parser"
audit_printk_skb: 3 callbacks suppressed
type=1400 audit(1337946693.773:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=757 comm="apparmor_parser"
type=1400 audit(1337946693.889:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=767 comm="apparmor_parser"
type=1400 audit(1337946693.889:15): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=767 comm="apparmor_parser"
type=1400 audit(1337946693.897:16): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=777 comm="apparmor_parser"
type=1400 audit(1337946693.897:17): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=777 comm="apparmor_parser"
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xf8600000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
type=1400 audit(1337946694.065:18): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=779 comm="apparmor_parser"
type=1400 audit(1337946694.233:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=752 comm="apparmor_parser"
type=1400 audit(1337946694.245:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=752 comm="apparmor_parser"
type=1400 audit(1337946694.249:21): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=752 comm="apparmor_parser"
type=1400 audit(1337946694.249:22): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=752 comm="apparmor_parser"
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:80:00.0: eth0: Link is up at 100 Mbps, full duplex
tg3 0000:80:00.0: eth0: Flow control is on for TX and on for RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
NVRM: The NVIDIA Quadro FX 330 GPU installed in this system is
NVRM: supported through the NVIDIA 173.14.xx Legacy drivers. Please
NVRM: visit for more
NVRM: information. The 295.40 NVIDIA driver will ignore
NVRM: this GPU. Continuing probe...
NVRM: No NVIDIA graphics adapter found!
eth0: no IPv6 routers present