dmesg - noterafa
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.1.0-7.fc16.i686 (mockbuild@x86-11.phx2.fedoraproject.org) (gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) ) #1 SMP Tue Nov 1 21:00:16 UTC 2011
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000de53a000 (usable)
BIOS-e820: 00000000de53a000 - 00000000de73a000 (ACPI NVS)
BIOS-e820: 00000000de73a000 - 00000000dfd94000 (usable)
BIOS-e820: 00000000dfd94000 - 00000000dfdbf000 (reserved)
BIOS-e820: 00000000dfdbf000 - 00000000dfe92000 (usable)
BIOS-e820: 00000000dfe92000 - 00000000dfebf000 (ACPI NVS)
BIOS-e820: 00000000dfebf000 - 00000000dfee3000 (usable)
BIOS-e820: 00000000dfee3000 - 00000000dfef7000 (ACPI data)
BIOS-e820: 00000000dfef7000 - 00000000dff00000 (usable)
BIOS-e820: 00000000f7000000 - 00000000f8000000 (reserved)
BIOS-e820: 00000000feb00000 - 00000000feb01000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000110000000 (usable)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.6 present.
DMI: Hewlett-Packard HP Pavilion dv4 Notebook PC/3642, BIOS F.17 12/10/2009
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0xdff00 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 base 0000FFE00000 mask FFFFFFE00000 write-protect
4 base 000100000000 mask FFFFF0000000 write-back
5 disabled
6 disabled
7 disabled
TOM2: 0000000120000000 aka 4608M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 01000000
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: 0000000000000000-00000000373fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037000000 page 2M
0037000000 - 00373fe000 page 4k
kernel direct mapping tables up to 373fe000 @ ffa000-1000000
RAMDISK: 7f53c000 - 7ffff000
Allocated new RAMDISK: 3693b000 - 373fdef3
Move RAMDISK from 000000007f53c000 - 000000007fffeef2 to 3693b000 - 373fdef2
ACPI: RSDP 000fe020 00024 (v02 HP )
ACPI: XSDT dfef6120 0005C (v01 HPQOEM SLIC-MPC 00000001 01000013)
ACPI: FACP dfef5000 000F4 (v04 HP REPLEY 00000003 MSFT 01000013)
ACPI: DSDT dfee6000 0BA95 (v01 HP REPLEY F0000000 MSFT 01000013)
ACPI: FACS dfe9b000 00040
ACPI: HPET dfef4000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: APIC dfef3000 00068 (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: MCFG dfef2000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: BOOT dfee5000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: SLIC dfee4000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: SSDT dfee3000 00386 (v01 AMD PowerNow 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
2699MB HIGHMEM available.
883MB LOWMEM available.
mapped low ram: 0 - 373fe000
low ram: 0 - 373fe000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000373fe
HighMem 0x000373fe -> 0x000dff00
Movable zone start PFN for each node
early_node_map[6] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000de53a
0: 0x000de73a -> 0x000dfd94
0: 0x000dfdbf -> 0x000dfe92
0: 0x000dfebf -> 0x000dfee3
0: 0x000dfef7 -> 0x000dff00
On node 0 totalpages: 916515
free_area_init_node: node 0, pgdat c0aa3f40, node_mem_map f4d3a200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1736 pages used for memmap
Normal zone: 220470 pages, LIFO batch:31
HighMem zone: 5399 pages used for memmap
HighMem zone: 684927 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x1002a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at dff00000 (gap: dff00000:17100000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 13 pages/cpu @f4800000 s29504 r0 d23744 u2097152
pcpu-alloc: s29504 r0 d23744 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 909348
Kernel command line: initrd=initrd0.img root=live:CDLABEL=Fedora-16-i686-Live-Desktop.iso rootfstype=auto ro liveimg quiet rhgb rd.luks=0 rd.md=0 rd.dm=0 BOOT_IMAGE=vmlinuz0
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 14675712 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000373fe:000dff00)
Memory: 3602660k/3668992k available (4189k kernel code, 63400k reserved, 2691k data, 592k init, 2761304k highmem)
virtual kernel memory layout:
fixmap : 0xffa95000 - 0xfffff000 (5544 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
.init : 0xc0ab9000 - 0xc0b4d000 ( 592 kB)
.data : 0xc081754a - 0xc0ab8200 (2691 kB)
.text : 0xc0400000 - 0xc081754a (4189 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:1280
CPU 0 irqstacks, hard=f3420000 soft=f3422000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2094.546 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.09 BogoMIPS (lpj=2094546)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
using AMD E400 aware idle routine
ACPI: Core revision 20110623
ftrace: allocating 24277 entries in 48 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) II Dual-Core M320 stepping 02
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog enabled, takes one hw-pmu counter.
CPU 1 irqstacks, hard=f34de000 soft=f34e8000
Booting Node 0, Processors #1 Ok.
smpboot cpu 1: start_ip = 9b000
Initializing CPU#1
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (8378.66 BogoMIPS).
System has AMD C1E enabled
Switch to broadcast mode on CPU1
Switch to broadcast mode on CPU0
devtmpfs: initialized
PM: Registering ACPI NVS region at de53a000 (2097152 bytes)
PM: Registering ACPI NVS region at dfe92000 (184320 bytes)
atomic64 test passed for i586+ platform with CX8 and with SSE
RTC time: 15:18:36, date: 05/23/12
NET: Registered protocol family 16
node 0 link 0: io port [0, ffffff]
TOM: 00000000e0000000 aka 3584M
Fam 10h mmconf [f7000000, f7ffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [f0000000, f22fffff]
node 0 link 0: mmio [f2300000, f24fffff]
node 0 link 0: mmio [f2500000, f6ffffff]
node 0 link 0: mmio [f7000000, f7ffffff] ==> none
node 0 link 0: mmio [f8000000, ffffffff]
TOM2: 0000000120000000 aka 4608M
bus: [00, 0f] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0xe0000000-0xf6ffffff]
bus: 00 index 3 [mem 0xf8000000-0xffffffff]
Extended Config Space enabled on 1 nodes
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-0f] at [mem 0xf7000000-0xf7ffffff] (base 0xf7000000)
PCI: MMCONFIG at [mem 0xf7000000-0xf7ffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
\_SB_.PCI0:_OSC request failed
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf6ffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf8000000-0xffffffff]
pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cebff])
pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
pci 0000:00:01.0: [103c:9602] type 1 class 0x000604
pci 0000:00:04.0: [1022:9604] type 1 class 0x000604
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: [1022:9605] type 1 class 0x000604
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: [1022:9606] type 1 class 0x000604
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: [1022:9607] type 1 class 0x000604
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
pci 0000:00:11.0: reg 10: [io 0x8038-0x803f]
pci 0000:00:11.0: reg 14: [io 0x804c-0x804f]
pci 0000:00:11.0: reg 18: [io 0x8030-0x8037]
pci 0000:00:11.0: reg 1c: [io 0x8048-0x804b]
pci 0000:00:11.0: reg 20: [io 0x8010-0x801f]
pci 0000:00:11.0: reg 24: [mem 0xf2508000-0xf25083ff]
pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:12.0: reg 10: [mem 0xf2507000-0xf2507fff]
pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
pci 0000:00:12.1: reg 10: [mem 0xf2506000-0xf2506fff]
pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:12.2: reg 10: [mem 0xf2508500-0xf25085ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:13.0: reg 10: [mem 0xf2505000-0xf2505fff]
pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
pci 0000:00:13.1: reg 10: [mem 0xf2504000-0xf2504fff]
pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:13.2: reg 10: [mem 0xf2508400-0xf25084ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
pci 0000:00:14.2: reg 10: [mem 0xf2500000-0xf2503fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
pci 0000:01:05.0: [1002:9712] type 0 class 0x000300
pci 0000:01:05.0: reg 10: [mem 0xe0000000-0xefffffff pref]
pci 0000:01:05.0: reg 14: [io 0x7000-0x70ff]
pci 0000:01:05.0: reg 18: [mem 0xf2400000-0xf240ffff]
pci 0000:01:05.0: reg 24: [mem 0xf2300000-0xf23fffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:01:05.1: [1002:970f] type 0 class 0x000403
pci 0000:01:05.1: reg 10: [mem 0xf2410000-0xf2413fff]
pci 0000:01:05.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:01.0: bridge window [mem 0xf2300000-0xf24fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02-07]
pci 0000:00:04.0: bridge window [io 0x3000-0x6fff]
pci 0000:00:04.0: bridge window [mem 0xf1300000-0xf22fffff]
pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf0ffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 08-08]
pci 0000:00:05.0: bridge window [mem 0xf1200000-0xf12fffff]
pci 0000:09:00.0: [14e4:4315] type 0 class 0x000280
pci 0000:09:00.0: reg 10: [mem 0xf1100000-0xf1103fff 64bit]
pci 0000:09:00.0: supports D1 D2
pci 0000:00:06.0: PCI bridge to [bus 09-09]
pci 0000:00:06.0: bridge window [mem 0xf1100000-0xf11fffff]
pci 0000:0a:00.0: [10ec:8136] type 0 class 0x000200
pci 0000:0a:00.0: reg 10: [io 0x2000-0x20ff]
pci 0000:0a:00.0: reg 18: [mem 0xf1010000-0xf1010fff 64bit pref]
pci 0000:0a:00.0: reg 20: [mem 0xf1000000-0xf100ffff 64bit pref]
pci 0000:0a:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:0a:00.0: supports D1 D2
pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0a:00.0: PME# disabled
pci 0000:00:07.0: PCI bridge to [bus 0a-0a]
pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:07.0: bridge window [mem 0xf1000000-0xf10fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 0b-0b] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf6ffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf8000000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
\_SB_.PCI0:_OSC request failed
_OSC request data:1 1f 1f
pci0000:00: Requesting ACPI _OSC control (0x1d)
\_SB_.PCI0:_OSC request failed
_OSC request data:1 0 1d
pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:05.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 00000000de53a000 - 00000000dfffffff
reserve RAM buffer: 00000000dfd94000 - 00000000dfffffff
reserve RAM buffer: 00000000dfe92000 - 00000000dfffffff
reserve RAM buffer: 00000000dfee3000 - 00000000dfffffff
reserve RAM buffer: 00000000dff00000 - 00000000dfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #1
Switched to NOHz mode on CPU #0
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0xe0000000-0xf6ffffff window]
pnp 00:00: [mem 0xf8000000-0xffffffff window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfec00000-0xfec00fff]
pnp 00:01: [mem 0xfee00000-0xfee00fff]
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x00f0-0x00fe]
pnp 00:03: [irq 13]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [io 0x0070-0x0071]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x0060]
pnp 00:06: [io 0x0064]
pnp 00:06: [io 0x0068]
pnp 00:06: [io 0x006c]
pnp 00:06: [irq 1]
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: [irq 12]
pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:08: [io 0x0010-0x001f]
pnp 00:08: [io 0x002e-0x002f]
pnp 00:08: [io 0x0072-0x0073]
pnp 00:08: [io 0x0080]
pnp 00:08: [io 0x00b0-0x00b1]
pnp 00:08: [io 0x0092]
pnp 00:08: [io 0x0400-0x04cf]
pnp 00:08: [io 0x04d0-0x04d1]
pnp 00:08: [io 0x04d6]
pnp 00:08: [io 0x0680-0x06ff]
pnp 00:08: [io 0x077a]
pnp 00:08: [io 0x0c00-0x0c01]
pnp 00:08: [io 0x0c14]
pnp 00:08: [io 0x0c50-0x0c52]
pnp 00:08: [io 0x0c6c]
pnp 00:08: [io 0x0c6f]
pnp 00:08: [io 0x0cd0-0x0cdb]
system 00:08: [io 0x0400-0x04cf] has been reserved
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x04d6] has been reserved
system 00:08: [io 0x0680-0x06ff] has been reserved
system 00:08: [io 0x077a] has been reserved
system 00:08: [io 0x0c00-0x0c01] has been reserved
system 00:08: [io 0x0c14] has been reserved
system 00:08: [io 0x0c50-0x0c52] has been reserved
system 00:08: [io 0x0c6c] has been reserved
system 00:08: [io 0x0c6f] has been reserved
system 00:08: [io 0x0cd0-0x0cdb] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0x000e0000-0x000fffff]
pnp 00:09: [mem 0xffe00000-0xffffffff]
system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:09: [mem 0xffe00000-0xffffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0a: [io 0xfd60-0xfd63]
pnp 00:0a: [irq 4]
pnp 00:0a: Plug and Play ACPI device, IDs ENE0100 (active)
pnp 00:0b: [irq 23]
pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:0a:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:07.0: BAR 14: assigned [mem 0xf2600000-0xf26fffff]
pci 0000:00:05.0: BAR 15: assigned [mem 0xf2700000-0xf28fffff 64bit pref]
pci 0000:00:05.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:01.0: bridge window [mem 0xf2300000-0xf24fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02-07]
pci 0000:00:04.0: bridge window [io 0x3000-0x6fff]
pci 0000:00:04.0: bridge window [mem 0xf1300000-0xf22fffff]
pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf0ffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 08-08]
pci 0000:00:05.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:05.0: bridge window [mem 0xf1200000-0xf12fffff]
pci 0000:00:05.0: bridge window [mem 0xf2700000-0xf28fffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 09-09]
pci 0000:00:06.0: bridge window [mem 0xf1100000-0xf11fffff]
pci 0000:0a:00.0: BAR 6: assigned [mem 0xf1020000-0xf103ffff pref]
pci 0000:00:07.0: PCI bridge to [bus 0a-0a]
pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:07.0: bridge window [mem 0xf2600000-0xf26fffff]
pci 0000:00:07.0: bridge window [mem 0xf1000000-0xf10fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 0b-0b]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:07.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf6ffffff]
pci_bus 0000:00: resource 19 [mem 0xf8000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:01: resource 1 [mem 0xf2300000-0xf24fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x6fff]
pci_bus 0000:02: resource 1 [mem 0xf1300000-0xf22fffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf0ffffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:08: resource 1 [mem 0xf1200000-0xf12fffff]
pci_bus 0000:08: resource 2 [mem 0xf2700000-0xf28fffff 64bit pref]
pci_bus 0000:09: resource 1 [mem 0xf1100000-0xf11fffff]
pci_bus 0000:0a: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:0a: resource 1 [mem 0xf2600000-0xf26fffff]
pci_bus 0000:0a: resource 2 [mem 0xf1000000-0xf10fffff 64bit pref]
pci_bus 0000:0b: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0b: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0b: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:0b: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:0b: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:0b: resource 10 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:0b: resource 11 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:0b: resource 12 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:0b: resource 13 [mem 0x000dc000-0x000dffff]
pci_bus 0000:0b: resource 14 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:0b: resource 15 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:0b: resource 16 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:0b: resource 17 [mem 0x000ec000-0x000effff]
pci_bus 0000:0b: resource 18 [mem 0xe0000000-0xf6ffffff]
pci_bus 0000:0b: resource 19 [mem 0xf8000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:01:05.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 11020k freed
Simple Boot Flag at 0x44 set to 0x1
apm: BIOS not found.
Intel AES-NI instructions are not detected.
audit: initializing netlink socket (disabled)
type=2000 audit(1337786316.854:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1664
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
NET: Registered protocol family 38
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:04.0: setting latency timer to 64
pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
pcieport 0000:00:05.0: setting latency timer to 64
pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
pcieport 0000:00:06.0: setting latency timer to 64
pcieport 0000:00:06.0: irq 42 for MSI/MSI-X
pcieport 0000:00:07.0: setting latency timer to 64
pcieport 0000:00:07.0: irq 43 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: Slot [1] registered
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ACPI: processor limited to max C-state 1
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (79 C)
ERST: Table is not found!
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery absent)
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
loop: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: irq 44 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m1024@0xf2508000 port 0xf2508100 irq 44
ata2: SATA max UDMA/133 abar m1024@0xf2508000 port 0xf2508180 irq 44
ata3: SATA max UDMA/133 abar m1024@0xf2508000 port 0xf2508200 irq 44
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: setting latency timer to 64
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xf2508500
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.1.0-7.fc16.i686 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: setting latency timer to 64
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xf2508400
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.1.0-7.fc16.i686 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.0: setting latency timer to 64
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 16, io mem 0xf2507000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.1.0-7.fc16.i686 ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.1: setting latency timer to 64
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xf2506000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.1.0-7.fc16.i686 ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: setting latency timer to 64
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xf2505000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.1.0-7.fc16.i686 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: setting latency timer to 64
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xf2504000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.1.0-7.fc16.i686 ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
ata3: SATA link down (SStatus 0 SControl 300)
usb 1-1: new high speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=1bcf, idProduct=0c31
usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 1-1: Product: USB to Serial-ATA bridge
usb 1-1: Manufacturer: Sunplus Innovation Technology.
usb 1-1: SerialNumber: FFFFFFFEDF011240160282
Refined TSC clocksource calibration: 2094.748 MHz.
Switching to clocksource tsc
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: SAMSUNG HM500JI, 2AC101C4, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ATAPI: hp CDDVDW TS-L633N, 0300, max UDMA/100
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM500JI 2AC1 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM hp CDDVDW TS-L633N 0300 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
usb 1-6: new high speed USB device number 3 using ehci_hcd
usb 1-6: New USB device found, idVendor=174f, idProduct=1107
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: USB Camera Device
usb 1-6: Manufacturer: Syntek
usb 1-6: SerialNumber: STK00001
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
usb 5-1: new full speed USB device number 2 using ohci_hcd
usb 5-1: New USB device found, idVendor=03f0, idProduct=231d
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: HP Integrated Module
usb 5-1: Manufacturer: Broadcom Corp
usb 5-2: new full speed USB device number 3 using ohci_hcd
usb 5-2: New USB device found, idVendor=138a, idProduct=0001
usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
IMA: No TPM chip found, activating TPM-bypass!
Magic number: 12:583:336
tty tty57: hash matches
ehci_hcd 0000:00:13.2: hash matches
rtc_cmos 00:04: setting system clock to 2012-05-23 15:18:40 UTC (1337786320)
powernow-k8: Found 1 AMD Athlon(tm) II Dual-Core M320 (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (2100 MHz)
powernow-k8: 1 : pstate 1 (1500 MHz)
powernow-k8: 2 : pstate 2 (800 MHz)
Initializing network drop monitor service
Freeing unused kernel memory: 592k freed
Write protecting the kernel text: 4192k
Write protecting the kernel read-only data: 2036k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
dracut: dracut-013-18.fc16
dracut: rd.luks=0: removing cryptoluks activation
dracut: root was live:/dev/disk/by-label/Fedora-16-i686-Live-Desktop.iso, liveroot is now live:CDLABEL=Fedora-16-i686-Live-Desktop.iso
udevd[107]: starting version 173
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:05.0: power state changed by ACPI to D0
radeon 0000:01:05.0: power state changed by ACPI to D0
radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
radeon 0000:01:05.0: setting latency timer to 64
[drm] initializing kernel modesetting (RS880 0x1002:0x9712 0x103C:0x3642).
[drm] register mmio base: 0xF2400000
[drm] register mmio size: 65536
ATOM BIOS: HP_Rachman20
radeon 0000:01:05.0: VRAM: 336M 0x00000000C0000000 - 0x00000000D4FFFFFF (336M used)
radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=336M, BAR=256M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 426484 kiB.
[TTM] Zone highmem: Available graphics memory: 1807136 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 336M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RS780 Microcode
radeon 0000:01:05.0: WB enabled
[drm] ring test succeeded in 0 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] LVDS
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] LCD1: INTERNAL_KLDSCP_LVTMA
[drm] Connector 2:
[drm] HDMI-A
[drm] HPD1
[drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] Radeon display connector VGA-1: No monitor connected or invalid EDID
[drm] Radeon display connector LVDS-1: Found valid EDID
[drm] Radeon display connector HDMI-A-1: No monitor connected or invalid EDID
[drm] radeon: power management initialized
input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input5
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6
[drm] fb mappable at 0xE0141000
[drm] vram apper at 0xE0000000
[drm] size 4096000
[drm] fb depth is 24
[drm] pitch is 5120
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x50
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.11.0 20080528 for 0000:01:05.0 on minor 0
dracut: Starting plymouth daemon
dracut: rd.dm=0: removing DM RAID activation
dracut: rd.md=0: removing MD RAID activation
wmi: Mapper loaded
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:04: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input7
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
Initializing USB Mass Storage driver...
scsi3 : usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 3:0:0:0: CD-ROM Slimtype DVD A DS8A5S WX13 PQ: 0 ANSI: 0
sr1: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
sr 3:0:0:0: Attached scsi CD-ROM sr1
sr 3:0:0:0: Attached scsi generic sg2 type 5
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
squashfs: version 4.0 (2009/01/31) Phillip Lougher
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
dracut: Mounted root filesystem /dev/mapper/live-rw
dracut: Switching root
type=1404 audit(1337786340.418:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 96028 rules.
SELinux: 2048 avtab hash slots, 96028 rules.
SELinux: 9 users, 13 roles, 3892 types, 204 bools, 1 sens, 1024 cats
SELinux: 82 classes, 96028 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev sr1, type iso9660), uses genfs_contexts
SELinux: initialized (dev loop0, type squashfs), not configured for labeling
SELinux: initialized (dev loop2, type squashfs), not configured for labeling
SELinux: initialized (dev dm-0, type ext4), uses xattr
type=1403 audit(1337786341.224:3): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 1s 204ms 660us.
systemd[1]: Successfully loaded SELinux database in 134ms 846us, size on heap is 362K.
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
systemd[1]: Relabelled /dev and /run in 72ms 386us.
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
systemd[1]: systemd 36 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
systemd[1]: Set hostname to .
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
systemd-fsck[544]: Root directory is writable, skipping check.
udevd[541]: starting version 173
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
EXT4-fs (dm-0): re-mounted. Opts: (null)
rmmod[702]: ERROR: Module scsi_wait_scan does not exist in /proc/modules
microcode: CPU0: patch_level=0x01000098
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
IR NEC protocol handler initialized
microcode: CPU1: patch_level=0x01000098
microcode: Microcode Update Driver: v2.00 , Peter Oruba
input: HP WMI hotkeys as /devices/virtual/input/input8
IR RC5(x) protocol handler initialized
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
hp_accel: laptop model unknown, using default axes configuration
lis3lv02d: 8 bits sensor found
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xd2
ene_ir: PLL freq = 1000
ene_ir: KB3926D or higher detected
r8169 0000:0a:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ene_ir: Firmware regs: 00 00
ene_ir: Hardware features:
ene_ir: * Uses GPIO 40 for IR demodulated input
r8169 0000:0a:00.0: setting latency timer to 64
r8169 0000:0a:00.0: irq 45 for MSI/MSI-X
r8169 0000:0a:00.0: eth0: RTL8102e at 0xf8dbc000, 78:e7:d1:f2:07:0d, XID 04c00000 IRQ 45
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input9
Registered led device: hp::hddprotect
hp_accel: driver loaded
SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
SP5100 TCO timer: mmio address 0xfec000f0 already in use
mtp-probe[749]: checking bus 1, device 2: "/sys/devices/pci0000:00/0000:00:12.2/usb1/1-1"
IR RC6 protocol handler initialized
mtp-probe[751]: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:12.2/usb1/1-6"
mtp-probe[757]: checking bus 5, device 3: "/sys/devices/pci0000:00/0000:00:13.0/usb5/5-2"
mtp-probe[751]: bus: 1, device: 3 was not an MTP device
mtp-probe[749]: bus: 1, device: 2 was not an MTP device
mtp-probe[757]: bus: 5, device: 3 was not an MTP device
IR JVC protocol handler initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
IR Sony protocol handler initialized
Registered IR keymap rc-rc6-mce
input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input10
rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
ene_ir: driver has been successfully loaded
b43-pci-bridge 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
b43-pci-bridge 0000:09:00.0: setting latency timer to 64
Linux media interface: v0.10
input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input11
IR MCE Keyboard/mouse protocol handler initialized
ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243)
ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor 0x4243)
ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243)
ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243)
ssb: Sonics Silicon Backplane found on PCI device 0000:09:00.0
lirc_dev: IR Remote Control driver registered, major 249
Linux video capture interface: v2.00
rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
IR LIRC bridge handler initialized
uvcvideo: Found UVC 1.00 device USB Camera Device (174f:1107)
cfg80211: Calling CRDA to update world regulatory domain
udevd[582]: renamed network interface eth0 to p7p1
input: USB Camera Device as /devices/pci0000:00/0000:00:12.2/usb1/1-6/1-6:1.0/input/input12
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ALSA sound/pci/hda/hda_intel.c:2415 Using LPIB position fix
snd_hda_intel 0000:00:14.2: setting latency timer to 64
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
b43-phy0: Broadcom 4312 WLAN found (core revision 15)
ALSA sound/pci/hda/hda_intel.c:1492 Enable sync_write for stable communication
ALSA sound/pci/hda/patch_sigmatel.c:5991 mute LED gpio 8 polarity 1
ALSA sound/pci/hda/hda_codec.c:4877 autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
ALSA sound/pci/hda/hda_codec.c:4881 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:4885 hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:4886 mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:4889 dig-out=0x20/0x0
ALSA sound/pci/hda/hda_codec.c:4890 inputs:
ALSA sound/pci/hda/hda_codec.c:4894 Mic=0xb
ALSA sound/pci/hda/hda_codec.c:4896
ALSA sound/pci/hda/patch_sigmatel.c:3104 stac92xx: dac_nids=1 (0x10/0x0/0x0/0x0/0x0)
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: b43-phy0::tx
Registered led device: b43-phy0::rx
Registered led device: b43-phy0::radio
Broadcom 43xx driver loaded [ Features: PMNLS, Firmware-ID: FW13 ]
input: HDA ATI SB Mic at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
snd_hda_intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ALSA sound/pci/hda/hda_intel.c:2415 Using LPIB position fix
snd_hda_intel 0000:01:05.1: setting latency timer to 64
ALSA sound/pci/hda/hda_intel.c:1492 Enable sync_write for stable communication
fedora-storage-init[812]: Setting up Logical Volume Management: No volume groups found
fedora-storage-init[812]: [ OK ]
fedora-storage-init[1043]: Setting up Logical Volume Management: No volume groups found
fedora-storage-init[1043]: [ OK ]
lvm[1049]: No volume groups found
systemd-tmpfiles[1054]: Successfully loaded SELinux database in 27ms 852us, size on heap is 363K.
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
b43-phy0 ERROR: Firmware file "b43/ucode15.fw" not found
b43-phy0 ERROR: Firmware file "b43-open/ucode15.fw" not found
b43-phy0 ERROR: You must go to and download the correct firmware for this driver version. Please carefully read all instructions on this website.
r8169 0000:0a:00.0: p7p1: link down
ADDRCONF(NETDEV_UP): p7p1: link is not ready
8021q: 802.1Q VLAN Support v1.8
fuse init (API version 7.17)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
r8169 0000:0a:00.0: p7p1: link up
ADDRCONF(NETDEV_CHANGE): p7p1: link becomes ready
r8169 0000:0a:00.0: p7p1: link down
r8169 0000:0a:00.0: p7p1: link up
p7p1: no IPv6 routers present
CE: hpet increased min_delta_ns to 20113 nsec